Sony KV-AZ212 Руководство пользователя

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Tr initron Color TV

KV-AZ212

2-687-422-E2 (1)

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

GB

M91

01GB01COV-SOEMRus.p65 5/15/07, 2:05 PM1

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

110-240 V AC, 50/60 Hz

Indicated on the rear of the TV

B/G, I, D/K, M

PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43

NICAM Stereo/Bilingual B/G, I, D/K;

A2 Stereo/ Bilingual B/G

English, Russian

VHF : E2 to E12 /UHF : E21 to E69 /

CATV : S01 to S03, S1 to S41

UHF : B21 to B68 /CATV : S01 to S03, S1 to S41

VHF : C1 to C12, R1 to R12 /

UHF : C13 to C57, R21 to R60 /

CATV : S01 to S03, S1 to S41, Z1 to Z39

VHF : A2 to A13 /UHF : A14 to A79 /

CATV : A-8 to A-2, A to W+4, W+6 to W+84

75-ohm external terminal

10 W + 10 W

Input: 2 Output: 1 Phono jacks; 1 Vp-p, 75 ohms

Input: 3 Output: 1 Phono jacks; 500 mVrms

Input: 1 Y: 1 Vp-p, 75 ohms,

unbalanced, sync negative

C: 0.286 Vp-p, 75 ohms

Input: 1 Phono jacks;

Y: 1 Vp-p, 75 ohms,

sync negative

C

B: 0.7 Vp-p, 75 ohms

C

R: 0.7 Vp-p, 75 ohms

Output: 1 Stereo minijack

87.5 - 108.0 MHz

10.7 MHz

21 in.

54

Measured diagonally

51

Measured diagonally

589 × 472 × 515

27

A Specifications

NoteKV-AZ212M91

Design and specifications are subject to change without notice.

Made in Malaysia.

Sony Corporation

1-7-1 Konan, Minato-ku,

Tokyo 108-0075, Japan.

Power requirements

Power consumption (W)

Television system

Color system

Stereo/Bilingual system

Teletext language

Channel coverage

B/G

I

D/K

M

8 (Antenna)

Audio output (Speaker)

Number of terminal

(Video)

(Audio)

(S Video)

(Component

Video)

i (Headphone)

FM Radio

Tuning Range

Intermediate

Frequency

Picture tube

Tube size (cm)

Screen size (cm)

Dimensions (w/h/d, mm)

Mass (kg)

http://www.sony.net/

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM2

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Clean the TV with a dry and soft

cloth. Do not use benzine, thinner,

or any other chemicals to clean the

TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape,

glue) on the painted cabinet of the

TV. Do not scratch the picture

tube.

B WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand

and floor which can support the

TV set weight. Ensure that the TV

stand surface is flat and its area is

larger than the bottom area of the

TV.

Do not plug in too many

appliances to the same power

socket. Do not damage the power

cord.

For children’s safety, do not leave

children alone with the TV. Do not

allow children to climb onto it.

For your own safety, do not touch

any part of the TV, the power cord

and the antenna cable during

lightning storms.

Do not place any objects on the TV.

The apparatus shall not be

exposed to dripping or splashing

and that no objects filled with

liquids, such as vases, shall be

placed on the apparatus.

Do not operate the TV if any liquid

or solid object falls into it. Have it

checked immediately by qualified

personnel only.

Do not block the ventilation

openings of the TV. Do not install

the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not open the cabinet and the

rear cover of the TV as high

voltages and other hazards are

present inside the TV. Refer

servicing and disposal of the TV

to qualified personnel.

Pull the power cord out by the

plug. Do not pull the power cord

itself. Even if your TV is turned

off, it is still connected to the AC

power source (mains) as long as

the power cord is plugged in.

Unplug the TV before moving it

or if you are not going to use it for

several days.

To prevent fire or shock hazard, do

not expose the TV to rain or

moisture.

Your TV is recommended for

home use only. Do not use the TV

in any vehicle or where it may be

subject to excessive dust, heat,

moisture or vibrations.

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM3

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

b

Insert the batteries (supplied) into the remote.

Note

• Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

Tips

•Your TV can receive both TV and FM radio signals from the

appropriate connections through the 8 (antenna input)

terminal (see E).

•You can also connect your TV to other optional components

(see E).

Plug in the power cord, then press ! on the TV to turn

it on.

Note

• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a malfunction.

Set up the TV by following the instructions of the

“Начальная настройкa” (“Initial Setup”) menu

(see D).

C Getting Started

Step 1

Step 2

Step 3

Step 4

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM4

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Program Sorting/Edit

01

02

03

04

Off

Sorting mode

PROG

SkipLabel

Off01

Exit

Select

Confirm

Program Sorting/Edit

01

02

03

04

Off

Sorting:

Edit:

PROG

SkipLabel

Exit

Select

Confirm

D

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa”

(“Initial Setup”) menu will appear. You may change the menu language, preset

the TV channels automatically, sort or edit the channels and adjust the picture

position using the buttons on the remote control or TV top control panel.

1

Press V or v to select the desired menu

language, then press .

The selected menu language appears.

2

Press V or v to select “Yes”, then press to

preset the channels automatically.

The screen will indicate automatic

presetting is in progress.

After all available channels have been tuned

and stored, the “Program Sorting/Edit”

menu appears automatically on the screen.

To skip automatic channel presetting, select

“No”, then press

.

If the message “No channel found. Please

connect cable/antenna” appears, check your

TV connections, then press

.

3

The “Program Sorting/Edit” menu enables

you to sort and edit the channels.

a) If you wish to keep the channels in the current

condition, press WEGA GATE to exit.

b) Press V or v to select the program

number with the channel you wish to

change. The selected channel will appear

on the screen.

c) If you wish to store the channels in a

different order:

1) Press b to enter sorting mode.

2) Press V or v to select the new program

number position for your selected

channel, then press B.

End

Select

Confirm

End

Select

Confirm

Program:

TV System: Auto

01

VHF Low

End

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM5

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

d) If you wish to edit the channels, press

to change to edit mode.

Press b until the mode that you wish to edit

is highlighted: Label, Skip,

(block symbol).

Then press

.

1) To label, press V or v to select the

alphanumeric characters for the label.

Then press

.

2) To skip the program number, press V or v to

select “On”. Then press

.

You can skip this program number when

using PROG +/–.

3) To block unwanted program number,

press V or v to select

. Then press .

e) Repeat step b) to d) if you wish to change other

channels.

Press WEGA GATE to go to the next menu.

4

Press B or b to adjust the bars on the top

and bottom of the menu if they are

slanted, then press

.

If no adjustment is necessary, then press

.

5

To prevent this “Initial Setup” menu from

appearing again when you turn on the TV

by pressing !, press V or v to select “No”,

then press

.

To allow this menu to appear again, select

“Yes”, then press

.

Tip

•You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

End

Select

Confirm

Picture Rotation

Select

Confirm

Display this menu next time?

No

Yes

Initial Setup

Exit

Select

Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

01

04

03

02

Off

Setting up your TV (“Initial Setup”) (continued)

Exit

Select

Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

01

04

03

02

Off

Exit

Select

Confirm

Program Sorting/Edit

Edit mode

Label Skip

PROG

01

04

03

02

Off

01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM6

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

E Connecting optional components

Connecting to the video input terminal ( t )

Notes

• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see M).

• When both (S video) and (video) for t 1 are connected at the same time,

(S video) is automatically selected. To view (video), disconnect the S video cable.

TV front panel

Antenna cable

(not supplied)

DVD player

TV rear panel

Audio/

Video cable

(not supplied)

Audio/Video cable

(not supplied)

Camcorder

S Video cable

(not supplied)

Antenna cable

(not supplied)

TV, CATV, Satellite

or

When there is no

FM signal

Antenna

selector

FM signal

TV signal

VCR

L

R

(MONO)

2

(

R

L

Y

C

B

C

R

MONO)

(

L

R

1

MONO)

R

L

R

L

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM7

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

DVD player

TV rear panel

Component video

cable

(not supplied)

Audio cable

(not supplied)

L

R

1

L

Y

C

B

C

R

(MONO)

Y

R

L

C

R

C

B

Connecting to the component video input terminal ( )

Notes

• If your DVD player can output interlace and progressive mode signals, select the interlace

output when connecting to (component video input) on your TV. Your TV can receive

either 525i/60Hz or 625i/50Hz interlace signals.

• The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/

PR, Y/Cb/Cr or Y/B-Y/R-Y.

• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not

be output properly. This does not indicate a malfunction.

TV rear panel

Audio system

(

R

L

Y

C

B

C

R

MONO)

(

L

R

1

MONO)

R

L

VCR

Audio/Video

cable

(not supplied)

Connecting to the monitor output terminal ( T )

Connecting optional components (continued)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM8

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

F Troubleshooting

If you find any problem while viewing your TV, you can either use the “Factory

Settings” function or check the Troubleshooting guide below. If the problem

persists, contact your Sony dealer.

“Factory Settings” function

Press the WEGA GATE button. Choose “Settings” and go to “Setup” ( )

menu. From “Setup” menu, select “Factory Settings”. Then select “Yes” and

press

. Your TV will go blank for a few seconds, then the “Initial Setup”

menu will appear. Your TV will be set to factory settings, but certain problems

may be solved.

Snowy picture,

noisy sound

Distorted picture,

noisy sound

Good picture,

noisy sound

No picture,

no sound

Good picture,

no sound

Dotted lines or

stripes

Double images

or “ghosts”

No color

Symptom Solutions

• Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

• Check the antenna setup. Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and select “Manual Program” to preset

the channel again (see M).

• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see M).

•Try using an external booster.

•Turn off or disconnect the external booster if it is in use.

• Display the “Channel Setup” menu and set the “Signal Booster” to “Off”

from “Manual Program” (see M).

• Display the “Channel Setup” menu and select the appropriate

“TV System” from “Manual Program” (see M).

• Check the power cord, antenna and VCR connections (see E).

•Press ?/1 (power) to turn on the TV (see G).

•Press ! (main power) on the TV to turn off the TV for about five seconds,

then turn it on again (see H).

•Press 2 + to increase the volume level (see G).

•Press to cancel the muting (see G).

• Do not use a hair dryer or other equipment near the TV.

• Check the antenna setup. Contact a Sony dealer for advice.

• Use a highly directional antenna.

• Use the fine tuning (“Fine”) function (see M).

• Check the antenna setup. Contact a Sony dealer for advice.

•Turn off or disconnect the external booster if it is in use.

•

Display the “Picture” menu and select “Custom” from “Picture Mode”, then

adjust the “Color” level from “Picture Adjustment” (see

K

).

• Display the “Setup” menu and check the “Color System” setting

(usually set this to “Auto”) (see N).

• Check the antenna setup. Contact a Sony dealer for advice.

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM9

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Picture slant

Abnormal color

patches

Teletext display

is incomplete

(snowy picture

or double images).

TV cannot receive

stereo broadcast

sound.

or

Stereo broadcast

sound switches on

and off or is

distorted.

TV cannot receive

FM radio station.

The 1 (standby)

indicator on your

TV flashes red

several times after

every three

seconds.

The TV screen

sometimes goes

blank for

slightly longer

than usual

during channel

change.

TV cabinet creaks.

A small “boom”

sound is heard

when the TV is

turned on.

• Keep external speakers or other electrical equipment away from the TV.

• Display the “Setup” menu and adjust “Picture Rotation” so that the

picture position is optimal (see

N

).

• Keep external speakers or other equipment away from the TV. Do not

move the TV while the TV is turned on. Press ! (main power) on the TV

to turn off the TV for about 15 minutes, then turn it on again to

demagnetize the TV.

• Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

• Check the antenna setup. Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”

from “Manual Program” (see M).

•Try using an external booster.

• Use the fine tuning (“Fine”) function (see M).

• Check the antenna cable and connection on the TV, VCR and at the wall

(see E).

• Check the antenna setup. Contact a Sony dealer for advice.

• Connect a separate FM antenna and the TV channel source through an

antenna selector (switch) to your TV (see E).

• Count the number of times the 1 (standby) indicator flashes.

Press ! (main power) to turn off your TV. Contact your nearest Sony

service center.

• The “Signal Booster” is functioning to detect a weak signal. This does not

indicate a malfunction.

• Changes in room temperature sometimes make the TV cabinet expand or

contract, causing a noise. This does not indicate a malfunction.

• The TV’s demagnetizing function is working. This does not indicate a

malfunction.

Symptom Solutions

Troubleshooting (continued)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM10

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

G Using the remote control and basic

functions

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

1

2

3

7

4

5

qj

qa

qd

qf

qh

WEGA

GATE

6

8

9

0

w;

ql

qg

qs

RETURN

qk

Button Description See

1 ?/1 Turn off temporarily or turn on –

the TV.

2 a Display the TV program. –

3 Jump to last program number –

that has been watched for at

least five seconds.

4 PROG +/–

Select program number. To select

–

quickly, press and hold until the

desired program number appears.

5 2 +/– Adjust volume. –

8 Change the picture size: –

“On” (16:9 wide-mode), “Off”.

9 Select surround mode options: L

“TruSurround”, “WOW”,

“Simulated”, “Off”.

0 Display on-screen information. –

qa Mute the sound. –

qd t Select TV or video input. E

qf 0 – 9 Input numbers. For program –

numbers 10 and above, enter the

second digit within two seconds.

ql Select sound mode options L

with a 5-Band Graphic

Equalizer display:

“Dynamic”, “Standard”,

“Custom”*.

* When the “Custom” mode is

selected, you can receive the

last adjusted sound settings

from the “Sound Adjustment”

option in the menu.

w;

Select picture mode options: K

“Vivid”, “Standard”, “Custom”*.

*

When the “Custom” mode is

selected, you can receive the

last adjusted picture settings

from the “Picture Adjustment”

option in the menu.

Dynamic

100 300 1k 3k 8k

Custom

100 300 1k 3k 8k

Standard

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM11

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Button Description See

WEGA GATE menu operations

6 Confirm selected items. I

7 WEGA GATE Display or cancel WEGA GATE menu.

qj V, v, B, b Select and adjust items.

qk RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the –

desired period of time (max. of 12 hours).

The indicator on TV lights up amber once you set

the wake up timer.

If no buttons or controls are pressed for more than one

hour after the TV is turned on using the wake up timer,

the TV automatically goes into standby mode.

qh Set TV to turn off automatically according to the –

desired period of time (max. of one hour and 30 min.).

Teletext operations (green label)

, , , , All buttons are used for Teletext operations. O

, , , ,

(red, green,

yellow, blue)

PIP operations

, , V, v, B, b Not function for your TV.

–

Stereo/bilingual operations

qs A/B Select stereo/bilingual mode. P

(Wake Up Timer)

(Sleep Timer)

WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW

and TruSurround technologies are incorporated under license from SRS Labs, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866.

“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

Using the remote control and basic functions (continued)

01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM12

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

WEGA GATE

PROG

FM

0

9

8

6

7

L

R

2

(MONO)

4

(

R

L

Y

C

B

C

R

MONO)

qa

(

L

R

1

MONO)

13

L

R

2

5

(MONO)

qf qsqd

2

TV front panel

TV rear panel

H TV top control, front and rear

panels

TV top control panel

Button/Terminal Function See

1 ! Turn off or turn on the TV. C

2 Remote control sensor. -

3 Wake Up indicator. G

3 1 Standby indicator. C

4 i Headphone jack. -

5 t2Video input terminal 2. E

6 PROG +/– Select program number. -

7 2 +/– Adjust volume. -

8 t Select TV or video input. E

WEGA GATE menu operations

6,7 V,v,B,b Select and adjust items. I

8

Confirm selected items. I

9 WEGA GATE Display or cancel WEGA GATE menu. I

0 FM Listen to FM radio. Q

qa 8 Antenna input terminal. E

qs T Monitor output terminal. E

qd Component video input terminal. E

qf t1Video input terminal 1. E

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM13

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

I Introducing the WEGA GATE

navigator

WEGA GATE is a gateway that allows you access to preset TV channels,

connected external inputs, FM Radio mode and “Settings” menu.

watch the preset TV

channels (see D)

select the inputs for the

connected equipment

(see E)

change the settings

of your TV

(see J)

How to use WEGA GATE

(1) Press WEGA GATE to display or cancel

the WEGA GATE menu.

Confirm

Select

WEGA GATE

FM Radio

External Inputs

TV

Settings

(3) Press V or v to select the desired item.

(4) Press RETURN to move to the previous

level.

(2) Press (or b) to confirm your selection

or go to the next level.

“TV”

“External

Inputs”

“Settings”

Confirm

Select

WEGA GATE

External Inputs

TV

Settings

FM Radio

01

02

03

04

05

TV

Confirm

Select

End

01

02

03

04

05

TV

Confirm

Select

End

Tip

• The WEGA GATE, and V,v,B,b buttons on the top control panel can also be used for the

operations above.

Confirm

Select

WEGA GATE

Settings

External Inputs

FM Radio

TV

01

02

03

04

05

TV

Confirm

Select

End

Preset 1:

---.--

Please setup FM Radio

FM Radio

Select Preset 1-9

Search

Exit

External Inputs

Confirm

Select

End

Video 1

1

2

DVD

Video 2

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

VM: High

Intelligent Picture: On

Signal Level Indicator: On

Select

Fine

“FM Radio”

listen to the FM Radio

(see Q)

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM14

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

J “Settings” Adjustment

You are able to change the settings of your TV from “Settings” in WEGA GATE

menu.

Press WEGA GATE button to display WEGA GATE menu. Press V or v to select

“Settings” and press

.

The following is an overview of the items that can be adjusted.

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

VM: High

Intelligent Picture: On

Signal Level Indicator: On

Select

“Picture” (see K)

“Picture Mode”: “Vivid” “Standard” “Custom”

“Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,

“Sharpness”, “Reset”

“Color Temperature”: “Cool” “Neutral” “Warm”

“VM”: “High” “Low” “Off”

“Intelligent Picture”: “On” “Off”

“Signal Level Indicator”: “On” “Off”

Confirm

End

Sound

Sound Adjustment

Sound Mode: Dynamic

Select

Balance

Intelligent Volume:

Surround: Off

Off

“Sound” (see L)

“Sound Mode”: “Dynamic” “Standard” “Custom”

“Sound Adjustment”: “Adjust”, “Reset”

“Balance”

“Intelligent Volume”: “On” “Off”

“Surround”: “TruSurround” “WOW” “Simulated”

“Off”

Confirm

End

Channel Setup

Select

Manual Program

Auto Program

Program Sorting/Edit

FM Radio Setup

“Channel Setup” (see M)

“Auto Program”

“Manual Program”

“Program”: “00” - “99”

“TV System”: “B/G” “I” “D/K” “M”

“VHF Low”/”VHF High”/”UHF”

“Fine”: “Auto” “Manual”

“Signal Booster”: “Auto” “Off”

“Program Sorting/Edit”

“FM Radio Setup”

Confirm

End

Setup

Select

Picture Rotation

Language:

Video Label

Color System:

Wake Up Timer Beep:

Auto

Factory Settings

On

English

“Setup” (see N)

“Language”: “English” “ ” (Russian)

“Picture Rotation”

“Video Label”: “Video Input”, “Label”

“Color System”: “Auto” “PAL” “SECAM” “NTSC3.58”

“NTSC4.43”

“Wake Up Timer Beep”: “On” “Off”

“Factory Settings”: “Yes” “No”

Note

• When a feature is dimmed in the menu, it is not selectable.

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM15

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

K Changing the “Picture” setting

The “Picture” menu allows you to adjust settings below.

1

Press WEGA GATE and select “Settings”.

2

Make sure the “Picture” icon ( ) is selected, then press .

3

Press V or v to select the desired item (e.g., “Picture Mode”), then press .

Select To

“Picture Mode” choose either “Vivid” (bright, contrast and sharp),

“Standard” (normal) or “Custom”*.

“Color Temperature” adjust white color tint.

Choose either “Cool” (blue tint), “Neutral” (neutral tint) or

“Warm” (red tint).

“VM” sharpen the edges of each object.

(Velocity Modulation) Choose either “High”, “Low” or “Off”.

“Intelligent Picture” optimize picture quality.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

“Signal Level Indicator” display the signal level when the “Intelligent Picture” is

functioning.

“Intelligent Picture Signal Level” indicator will be displayed,

followed by picture improvement when you change the

program number or the input mode.

red amber green

(weak) (average) (good)

Press V or v to select “On”, then press .

To cancel, select “Off”, then press . “Intelligent Picture” is

still functioning.

*You can adjust the setting to your personal preference in the “Picture Adjustment”,

“Color Temperature” and “VM” options only when the “Custom” mode is selected.

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM16

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Adjusting the “Picture Adjustment” items under “Custom”

mode

1

Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,

“Hue” (color tones) or “Sharpness”, then press

.

Selecting “Reset” will set your TV to the factory settings.

2

Press V,v,B or b to adjust the setting of your selected item, then press .

3

Repeat the above steps to adjust other items.

The adjusted settings will be received when you select “Custom”.

Notes

• “Hue” can be adjusted for the NTSC color system only.

• Reducing “Sharpness” can also reduce picture noise.

Changing the “Picture” setting (continued)

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM17

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

L Changing the “Sound” setting

The “Sound” menu allows you to adjust settings below.

1

Press WEGA GATE and select “Settings”.

2

Press V or v to select the “Sound” icon ( ), then press .

3

Press V or v to select the desired item (e.g., “Sound Mode”), then press .

Select To

“Sound Mode” choose either “Dynamic” (low and high tones), “Standard”

(voice and high tones) or “Custom”*.

“Balance” Press v or B to emphasize the left speaker.

Press V or b to emphasize the right speaker.

“Intelligent Volume” adjust the volume of all program numbers and video inputs

automatically.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

“Surround” choose either “TruSurround”(surround sound that spreads

out to the rear of a room), “WOW”** (full, deep bass sound),

“Simulated” (stereo-like monaural sound) or “Off”.

*You can adjust the setting to your personal preference in the “Sound Adjustment”

option only when the “Custom” mode is selected.

** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW

mode.

Note

• “Intelligent Volume” is not selectable when “TruSurround” is selected.

Adjusting the “Sound Adjustment” items under “Custom”

mode

The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings

of “Custom” mode in the menu.

1

Make sure that “Adjust” is selected, then press .

Selecting “Reset” will set your TV to the factory settings.

2

Press B or b to select the desired sound frequency, then press V or v to

adjust the setting and press .

The adjusted settings will be received when you select “Custom”.

Notes

• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency

will affect lower pitched sound.

•You may display the settings directly by using button on the remote control (see G).

01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM18

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

M Changing the “Channel Setup”

setting

The “Channel Setup” menu allows you to adjust settings below.

1

Press WEGA GATE and select “Settings”.

2

Press V or v to select the “Channel Setup” icon ( ), then press .

3

Press V or v to select the desired item (e.g., “Auto Program”), then press .

Select To

“Auto Program” preset channels automatically.

“Manual Program” manually preset desired channels and channels that cannot

be preset automatically (see Presetting channels manually).

“Program Sorting/Edit” change the order in which the channels appear on the screen,

label the program number, skip the program number and

block unwanted programs (see step 3 of the section “Initial

Setup” in D).

“FM Radio Setup”* preset up to nine FM radio stations.

You can manually preset each FM radio station that can be

received in your area and then store the radio frequency of

the desired FM radio stations.

(1) Press V or v to select the desired FM radio station

position, then press .

(2) Press V or v to search the FM radio stations.

Searching stops automatically when a station is tuned in.

If the station has a weak signal, press B or b to fine tune

the radio frequency manually, then press to store the

FM radio station.

(3) You may edit the FM radio station label. Press V or v to

select alphanumeric characters for the label, then press

.

(4) Repeat steps (1) through (3) to preset other FM radio

stations.

* The “FM Radio Setup” feature is only available in FM

Radio mode. To enable this feature, access to FM Radio

mode by using WEGA GATE system (see I) or

pressing the FM button on the top control panel (see H),

then preset your desired FM radio stations according to

the steps mentioned above.

Notes

• If you preset a blocked program number, that program number will be unblocked

automatically.

• If you sort a blocked program, that program will remain blocked.

01GB05ADJ-SOEMRus.p65 5/15/07, 2:07 PM19

Black

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)

Presetting channels manually

1

After selecting “Manual Program”, select the program

number to which you want to preset a channel.

(1) Make sure “Program” is selected, then press

.

(2) Press V or v

until the program number you want

to preset appears on the menu, then press

.

2

Select the desired channel.

(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press

.

(2) Press V or v until the desired channel’s broadcast appears on the TV screen,

then press .

3

If the sound of the desired channel is abnormal, select the appropriate TV

system.

(1) Press V or v

to select “TV System”, then press .

(2) Press V or v

until the sound becomes normal, then press .

4

If you are not satisfied with the picture and sound quality, you may be able

to improve them by using the “Fine” tuning feature.

(1) Press V or v

to select “Fine”, then press .

(2) Press V or v

to select “Manual”, then press .

(3)

Press V,v,B or b until the picture and sound quality are optimal, then press .

The + or – icon on the menu flashes while tuning.

5

If the TV signal is too strong (picture distorted; picture with lines; signal

interference) or weak (snowy picture), you may be able to improve the

picture quality by setting the “Signal Booster” feature.

(1) Press V or v

to select “Signal Booster”, then press .

(2) Press V or v

to select either “Off” (for picture distorted; picture with lines;

signal interference) or “Auto” (for snowy picture), then press

.

Changing the “Channel Setup” setting (continued)

01GB05ADJ-SOEMRus.p65 5/15/07, 2:07 PM20

Black

Страница загружается ...

Sony KV-AZ212 Руководство пользователя

Это руководство также подходит для

Sony KV-AZ212 Руководство пользователя

на других языках

Похожие модели бренда