Samsung PS-50 C490 B3W Руководство пользователя





   

Плазменный

телевизор







   









  SAMSUNG   



    

  

  

  

  

  

  

  

  

 





  

  

:



0-BN68-03141B-00L04-Cover.indd 1 2010-08-25 󱹙󲻹 1:12:42

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are

broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local

dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so

on, are not included in this speciﬁcation. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV

performance in the local SAMSUNG Authorized Dealer, or the Samsung Call centre whether it can be improved by reconﬁguring TV setting or

not.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours

as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper part of the

product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the

upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or

humidity. This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to

the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

[PC490-RU]BN68-03141B-00L04.indb 2 2010-08-25 󱹙󲀹 9:53:14

3

ENGLISH

English

Check the Symbol!



This function can be used by pressing the

TOOLS button on the remote control.

Note One -Touch Button

Indicates additional information. Check here for instructions on how to open

the relevant submenu within the OSD (on

screen display).

Contents

Getting Started



4 Accessories

5 Viewing the Control Panel

6 Viewing the Remote Control

7 Connecting to an Antenna

7 Plug & Play (Initial Setup)

Connections



8 Connecting to an AV Device

9 Connecting to an Audio Device

10 Changing the Input Source

Basic Features



10 How to Navigate Menus

11 Using the

INFO button (Now & Next guide)

11 Planning Your Viewing

12 Channel Menu

14 Picture Menu

19 Sound Menu

21 Setup Menu

23 Support Menu

Advanced Features



25 Connecting to a PC

26 Media Play

32 Anynet+

Other Information



35 Analogue Channel Teletext Feature

36 Installing the Wall Mount

37 Securing the TV to the wall

38 Troubleshooting

41 Speciﬁcations

42 Securing the Installation Space

43 Index

[PC490-RU]BN68-03141B-00L04.indb 3 2010-08-25 󱹙󲀹 9:53:15

4

English

Getting Started

Accessories

✎

Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.



Do not insert your fingers into the stand base slot of the TV when installing the stand base.

y Remote Control & Batteries (AAA x 2)

y Owner’s Instructions

y Cleaning Cloth

y Power Cord

y Warranty Card / Safety Guide (Not available in some locations)

y Blanking Bracket y Ferrite Core (1EA)

(depending on the country)

See separate guide for installing the stand.

y Stand (1EA) y Guide Stand (1EA) y Screws (8EA)

✎

Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite

core and clip it around the cable near the plug as shown in the figure.

x

Distance between the ferrite core and one end of the cord put into the TV set

A

y A : below 50 mm

4EA (M4 X L10)

4EA (M4 X L12)

[PC490-RU]BN68-03141B-00L04.indb 4 2010-08-25 󱹙󲀹 9:53:16

5

01 Getting Started

English

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

SOURCE



Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER



button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.



Adjusts the volume. In the OSD, use the



buttons as you would use the

 and  buttons on the remote control.



Changes the channels. In the OSD, use the



buttons as you would use the

 and  buttons on the remote control.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.



(Power)

Turns the TV on or off.

Remote control sensor Aim the remote control towards this spot on the TV.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Speakers

Power Indicator

Remote control sensor

[PC490-RU]BN68-03141B-00L04.indb 5 2010-08-25 󱹙󲀹 9:53:16

6

Getting Started

English

Viewing the Remote Control

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from TV.

x

Bright light may affect the performance of the remote

control. Avoid using nearby special fluorescent light or neon

sign.

x

The colour and shape may vary depending on the model.

Turns the TV on and off.

Returns to the previous channel.

To mute all TV output sound.

Displays channel lists on the screen

(p. 12).

Changes channels.

Displays and selects the available video

sources (p. 10).

Displays the EPG (Electronic Programme

Guide) (p. 11).

Displays information on the TV screen.

Exits the menu.

Selects the on-screen menu items and

changes the values seen on the menu.

P.MODE: Press to select the picture

mode (p. 14).

DUAL -: Sound effect selection

(p. 20).

3D: Activate 3D mode/menu (p. 17).

AD: Turns the audio description on

and off (not available in some locations)

(p. 20).

P.SIZE: Selects the picture size (p. 15).

SUBT.: Displays digital subtitles (p. 22).

Have direct access to channels.

Adjusts the volume.

Opens the OSD.

Quickly select frequently used functions.

Returns to the previous menu.

Alternately select Teletext ON, Double,

Mix or OFF.

Displays Media Play (USB) (p. 26).

These buttons are for the

Channel Manager, Media Play (USB)

menu, etc.

Use these buttons in Media Play (USB)

and Anynet+ (HDMI-CEC) modes

(p. 26, 32).

(



: Controls recording for Samsung

recorders that have the Anynet+ feature)

P.MODE

MEDIA.P

RETURN

ΕΧΙΤ

INFO

DUAL

SUBT.

AD P.SIZE

SOURCE

CH LIST

A B C D

TTX/MIX

[PC490-RU]BN68-03141B-00L04.indb 6 2010-08-25 󱹙󲀹 9:53:17

7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the power cord and antenna.

✎

The PDP device may interfere with an amateur radio or AM radio.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER



button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language

Press the  or  button, then press the

ENTER



button.

Select the desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo

or Home Use

Press the  or  button, then press the

ENTER



button.

y Select the Home Use mode. Store Demo mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume OSD, press and hold MENU for 5 sec.

3

Selecting a country

Press the  or  button, then press the

ENTER



button.

Select the appropriate country. If the desired country does not exist on the menu, select

Others.

4

Selecting an antenna

Press the  or button, then press the

ENTER



button.

Select Air or Cable.

5

Selecting a channel

Press the  or  button, then press the

ENTER



button.

Select the channel source to memorise. When setting the antenna source to Cable, a step

appears allowing you to assign numerical values (channel frequencies) to the channels. For

more information, refer to Channel  Auto Store (p. 12).

✎

Press the ENTER



button at any time to interrupt the memorisation process.

6

Setting the

Clock Mode

Set the Clock Mode automatically or manually.

Press the  or  button to select Auto, then press the ENTER



button.

7

Time Zone

Press the  or  button to select the your time zone, then press the

ENTER



button

(depending on the country).

8

Viewing the HD

Connection Guide.

The connection method for the best HD screen quality is displayed.

9

Enjoy your TV.

Press the

ENTER



button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to

change the PIN number, use the Change PIN function.

ANT OUT

VHF/UHF Antenna

or

Cable

Power Input

[PC490-RU]BN68-03141B-00L04.indb 7 2010-08-25 󱹙󲀹 9:53:17

8

English

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080i)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver

✎

HDMI IN 1(DVI), 2, 3, PC/DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable

connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the

PC/DVI AUDIO IN jacks for audio.

x

If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI

versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying flicker / abnormal colour).

x

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and

request an upgrade.

x

It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component (up to 720p/1080i) or Audio/Video (480i only) and Scart Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

✎

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

HDMI OUT

DVI OUT

W

R

W R

AUDIO OUT

R-AUDIO-L

DVD / Blu-ray

player

DVD / Blu-ray

player

 

VIDEO OUT

AUDIO OUT

R-AUDIO-L

EXT

PR PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

Y

W

R

G

B W R

Y

W

R

W

R

W

RRG

B

R

G

B

W

R

VCR

 

VCR / DVD

DVD /

Blu-ray player



[PC490-RU]BN68-03141B-00L04.indb 8 2010-08-25 󱹙󲀹 9:53:19

9

English

02 Connections

Connecting to an Audio Device

Using an Optical (Digital) or Headphone Connection

Available devices: digital audio system, ampliﬁer, DVD home theatre

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV’s

optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD

home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB

(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the

amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎

Headphones



: You can connect your headphones to the headphones output on your set. While the

headphones are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

CONNECTIONS

COMMON INTERFACE Slot

To watch paid channels, the “CI or CI+ CARD” must be inserted.

y If you don’t insert the “CI or CI+ CARD”, some channels will

display the message “Scrambled Signal”.

y The pairing information containing a telephone number, the “CI or

CI+ CARD” ID the Host ID and other information will be displayed

in about 2~3 minutes. If an error message is displayed, please

contact your service provider.

y When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the

channel list is updated.

✎

NOTE

x

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI (CI+) CARD” may

cause damage to it.

x

Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the COMMON INTERFACE slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be

seen.

OPTICAL

digital audio system

[PC490-RU]BN68-03141B-00L04.indb 9 2010-08-25 󱹙󲀹 9:53:20

10

English

Connections

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

E

MEDIA.P

G

UIDE

RETURN

ΕΧΙΤ

INFO

P

L

E

A

B

C

D

2

3 4

1

1 MENU button: Displays the main on-screen menu.

2 ENTER



/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU



The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

 /  Select an icon with the  or 

button.

3

ENTER



Press ENTER



to access the

sub-menu.

4

 / 

Select the desired submenu with

the  or  button.

5

 / 

Adjust the value of an item with the

 or  button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER



Press ENTER



to complete the

conﬁguration.

7

EXIT



Press EXIT.

Changing the Input Source

Source List

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.

■ TV / Ext. / AV / Component / PC /

HDMI1/DVI / HDMI2 / HDMI3 / USB

✎

In the Source List, connected

inputs will be highlighted.

✎

Ext. and PC always stay

activated.

SOURCE

Edit Name

■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

✎

If an HDMI cable is connected to the

HDMI IN 1(DVI) port, the audio may not work. In

this case, connect to the

PC/DVI AUDIO IN port.

[PC490-RU]BN68-03141B-00L04.indb 10 2010-08-25 󱹙󲀹 9:53:21

11

English

03 Basic Features

Using the INFO button (Now & Next guide)

The display identiﬁes the current channel and

the status of certain audio-video settings.

The Now & Next guide shows daily TV

programme information for each channel

according to the broadcasting time.

y Scroll ,  to view information for a

desired programme while watching the

current channel.

y Scroll ,  to view information for other channels. If you

want to move to the currently selected channel, press

the

ENTER



button.

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide)

information is provided by broadcasters.

Using programme schedules provided by

broadcasters, you can specify programmes

you want to watch in advance so that the

channel automatically changes to the selected

programme channel at the speciﬁed time.

Programme entries may appear blank or out of date

depending on a channel status.

Using Channel View

Using Scheduled View

1

Red (View Mode): View the list of programmes that

are playing now or coming up.

2

Yellow (+24 Hours): Viewing the list of programmes to

be broadcasted after 24 hours.

3

Blue (Ch. Mode): Select the type of channels you

want to display on the Channel View window. (All, TV,

Radio, Data/Other, My Channel 1~4)

4 Information: Displays details of the selected

programme.

5



(Page): Move to next or previous page.

6 ENTER



button

– When selecting the current programme, you can

watch the selected programme.

– When selecting the future programme, you can

reserve to watch the selected programme. To cancel

the schedule, press the ENTER



button again and

select Cancel Schedules.

 Seeing Channels

Channel Manager

Delete or set favourite channels and use the programme

guide for digital broadcasts. Select a channel in the

Channels, My Channels or Scheduled screen.

GUIDE

DTV Air

15

DEF

18:00 ~ 6:00

Life On Venus Avenue

Unclassified

No Detaild Information

E







INFO

DTV Air 800 five

Home and Away

18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

27

28

800

24

16

6

Discovery

DiscoveryH&L

five

price-drop.tv

QVC

R4DTT

American Chopper

Programmes resume at 06:00

Home and...

No Information

QVC Selection

No Information

Tine Team

Fiv...

18:00 - 19:00 19:00 - 20:00

)

Family Affairs

)

Dark Angel

800 ﬁve

   















1 2 3 4 5 6



DTV Air 800 five

Family Affairs

18:00 - 18:30

Drama

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

18:30

19:15

)

Family Affairs

)

Dark Angel

800

five

800 ﬁve

 











1 4 6



c 1 1futech

2 * 24ore.tv

15 abc1

3 BBC World

23 bid-up.tv

33 Boonerang

32 Cartoon Nwk

5 Class News

4 \ Coming Soon

27 Discovery

r

 

B

  











All

TV

Radio

Data/Other

Analogue

[PC490-RU]BN68-03141B-00L04.indb 11 2010-08-25 󱹙󲀹 9:53:23

12

English

Basic Features

■ Channels: Shows the channel list according to

channel type.

■



My Channels: Shows the group of the channel.

■

Scheduled: Shows all the currently reserved

programmes.

✎

Using the colour buttons with the Channel Manager

x

Red (Antenna): Toggle among Air or Cable.

x

B

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The



mark appears to the left of the selected channels.

x

Blue (Sort): Change the list ordered by channel

name or channel number.

x



(Page): Move to next or previous page.

x



(Tools): Displays the Channel Manager option

menu. (The options menus may differ depending on

the situation.)

Channel Status Display Icons

Icons Operations



An analogue channel.



A channel selected.



A channel set as a Favourite.



A programme currently being broadcast.



A locked channel.



A reserved programme.

 Using Favourite Channels



My Channels

(in Channel Manager)

Shows all favourite channels.

■ Edit My Channels



: You can set the selected

channels to desired my channels group.

✎

The “



” symbol will be displayed and the channel will

be set as a My Channels.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

x

One or more groups can be selected.

3. After you have changed the settings, the channel list

for each group can be viewed in my channels.

Channel List

You can see all the channels searched.

CH LIST

Channel Menu

 Returning Channels

Antenna (Air / Cable)



Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Country

The PIN input screen appears. Enter your 4 digit PIN number.

■ Digital Channel: Change the country for digital

channels.

■ Analogue Channel: Change the country for analogue

channels.

Auto Store

Scans for a channel automatically and stores in the TV.

✎

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If

a channel is locked using the Child Lock function, the

PIN input window appears.

■ Antenna Source (Air / Cable): Select the antenna

source to memorise.

c 1 1futech

2 * 24ore.tv

15 abc1

3 BBC World

23 bid-up.tv

33 Boonerang

32 Cartoon Nwk

5 Class News

4 \ Coming Soon

27 Discovery

r

 

B

  



























TV







[PC490-RU]BN68-03141B-00L04.indb 12 2010-08-25 󱹙󲀹 9:53:24

13

English

03 Basic Features

■ Channel Source (Digital & Analogue / Digital /

Analogue): Select the channel source to memorise.

When selecting Cable  Digital & Analogue or Digital:

Provide a value to scan for cable channels.

Search Mode (Full / Network / Quick): Scans for all

channels with active broadcast stations and stores them

in the TV.

✎

If you select Quick, you can set up the Network,

Network ID, Frequency, Modulation and

Symbol Rate manually by pressing the button on

the remote control.

Network (Auto / Manual): Selects the Network ID

setting mode among Auto or Manual.

Network ID: When Network is Manual, you can set up

Network ID using the numeric buttons.

Frequency: Displays the frequency for the channel

(differs in each country).

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

Manual Store

Scans for a channel manually and stores in the TV.

■ Digital Channel: When scanning has ﬁnished, channels

are updated in the channel list.

✎

When selecting Antenna  Air: Channel,

Frequency, Bandwidth

✎

When selecting Antenna  Cable: Frequency,

Modulation, Symbol Rate

■ Analogue Channel (Programme, Colour System,

Sound System, Channel, Search): If there is abnormal

sound or no sound, reselect the sound standard

required.

✎

Channel mode

x

P (programme mode): When tuning is complete,

the broadcasting stations in your area have been

assigned to position numbers from P0 to P99. You

can select a channel by entering the position number

in this mode.

x

C (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel

by entering the assigned number for each aerial

broadcasting station or cable channel.

 Editing Channels

Channel Manager Option Menu

(in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the

Edit Channel Name or Edit Channel Number menu.

■ Edit Channel Name (analogue channels only): Assign

your own channel name.

■ Edit Channel Number (digital channels only): Edit the

number by pressing the number buttons desired.

 Other Features

Cable Search Option

(depending on the country)

Sets additional search options such as the frequency and

symbol rate for a cable network search.

■ Freq.Start / Freq.Stop: Set the start or stop frequency

(differs in each country)

■ Symbol Rate: Displays available symbol rates.

■ Modulation: Displays available modulation values.

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options

(Lock / Unlock, Timer Viewing, Sort, Delete, Select All /

Deselect All). Option menu items may differ depending on

the channel status.

1. Select a channel and press the

TOOLS button.

2. Select a function and change its settings.

■ Lock / Unlock: Lock a channel so that the channel

cannot be selected and viewed.

✎

NOTE

x

This function is available only when the Child Lock

is set to On.

x

The PIN input screen appears. Enter your 4-digit PIN,

the default of which is “0-0-0-0.” Change the PIN

using the Change PIN option.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

✎

When a digital channel is selected, press the 

button to view the digital Programme.

■ Sort (analogue channels only): This operation allows

you to change the programme numbers of the stored

channels. This operation may be necessary after using

the auto store.

■ Delete: You can delete a channel to display the channels

you want.

■ Select All / Deselect All: Select all the channels

or deselect all the selected channels in the channel

manager.

Scheduled

(in Channel Manager)

You can view, modify or delete a show you have reserved to

watch.

■ Change Info: Change a show you have reserved to

watch.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

[PC490-RU]BN68-03141B-00L04.indb 13 2010-08-25 󱹙󲀹 9:53:24

14

English

Basic Features

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

information.)

■ Select All / Deselect All: Select or deselect all reserved

programmes.

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number.

Imports or exports the channel map. You should connect a

USB storage to use this function.

■ Import from USB: Import channel list from USB.

■ Export to USB: Export channel list to USB. this function

is available when USB is connected.

Fine Tune

(analogue channels only)

If the signal is weak or distorted, ﬁne tune the channel

manually.

✎

Fine tuned channels are marked with an asterisk “*.”

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode

Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal

environment.

■ Movie: Suitable for watching movies in a

dark room.

 Adjusting Picture Settings

Cell Light / Contrast / Brightness /

Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

x

In analogue TV, Ext., AV modes of the PAL system,

the Tint (G/R) function is not available.

x

In PC mode, you can only make changes to

Cell Light, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

 Economical Solutions

Eco Solution

■ Energy Saving (Off / Low / Medium / High /

Picture Off)



: This adjusts the brightness of

the TV in order to reduce power consumption. If you

select Picture Off the screen is turned off, but the

sound remains on. Press any button except volume

button to turn on the screen. Until the screen turns on

again, a distorted picture will be displayed for about 4

seconds.

■ Eco Sensor (Off / On): To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

✎

If you adjust the Cell Light, the Eco Sensor will

be set to Off.

Min Cell Light: When Eco sensor is On, the minimum

screen brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness

may change (become slightly darker or brighter)

depending on the surrounding light intensity.

■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):

To avoid unnecessary energy consumption, set how long

you want the TV to remain on if it's not receiving a signal.

✎

Disabled when the PC is in power saving mode.

 Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including

colour and contrast.

✎

In PC mode, you can only make changes to

Dynamic Contrast, Gamma and White Balance.

Advanced Settings

   

 

 

 

 



 















P.MODE

[PC490-RU]BN68-03141B-00L04.indb 14 2010-08-25 󱹙󲀹 9:53:25

15

English

03 Basic Features

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■ Gamma: Adjust the primary colour intensity.

■ RGB Only Mode (Off / Red / Green / Blue): You can

adjust Colour or Tint (G/R) of Red, Green or Blue for

the picture from an external device (DVD player, home

theatre, etc.).

■ Colour Space (Auto / Native): Adjust the range of

colours available to create the image.

■ White Balance: Adjust the colour temperature for a

more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,

green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Picture Options

✎

In PC mode, you can only make changes to the

Colour Tone, Size and Screen Burn Protection.

■ Colour Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic.

✎

Settings can be adjusted and stored for each external

device connected to an input on the TV.

■ Size: Your cable box/satellite receiver may

have its own set of screen sizes as well.

However, we highly recommend you use

16:9 mode most of the time.

Auto Wide: Automatically adjusts the

picture size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9 for

DVDs or wide broadcasting.

Wide Zoom: Magniﬁes the picture size more than 4:3.

✎

Adjusts the Position by using ,  buttons.

Zoom: Magniﬁes the 16:9 wide pictures vertically to ﬁt

the screen size.

✎

Adjusts the Position or Size by using , 

button.

4:3 : The default setting for a movie or normal

broadcasting.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre

of the screen may cause image retention(screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

Depending on the input source, the picture size

options may vary.

x

The available items may differ depending on the

selected mode.

x

In PC mode, only 16:9 and 4:3 modes can be

adjusted.

x

Settings can be adjusted and stored for each

external device connected to an input on the TV.

x

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the

Position or Size by using , , ,  button.

x

If you use the Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and

right as in the overscan function.

Picture Options

   

 

 

 

 

 

 















P.SIZE

[PC490-RU]BN68-03141B-00L04.indb 15 2010-08-25 󱹙󲀹 9:53:26

16

English

Basic Features

■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):

Available only when picture size is set to Auto Wide. You

can determine the desired picture size at the 4:3 WSS

(Wide Screen Service) size or the original size. Each

European country requires different picture size.

✎

Not available in PC, Component or HDMI mode.

■ Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation): When the broadcast signal is

weak, some static and ghosting may appear. Select one

of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels,

displays the intensity of the current signal and deﬁnes

the screen noise ﬁlter.

✎

Only available for analogue channels.

■ MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ Screen Burn Protection: To reduce the possibility of

screen burn, this unit is equipped with screen burn

prevention technology. The Time setting allows you to

programme the time between movement of the picture

in minutes.

Pixel Shift (Off / On): Using this function, you can

minutely move pixels on the PDP in horizontal or vertical

direction to minimize after image on the screen.

✎

Optimum condition for pixel shift

Item

TV/AV/Component/

HDMI/PC

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎

The Pixel Shift value may differ depending on the

monitor size (inches) and mode.

✎

This function is not available in the Screen Fit

mode.

Auto Protection Time (10 min / 20 min / 40 min /

1 hour / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user,

the screen saver is activated to prevent the formation of

ghost images on the screen.

Scrolling: This function removes after-images on the

screen by moving all the pixels on the PDP according

to a pattern. Use this function when there are remaining

after images or symbols on the screen, especially when

you displayed a still image on the screen for a long time.

✎

The after-image removal function has to be

executed for a long time (approximately 1 hour)

to effectively remove after-images on the screen.

If the after-image is not removed after performing

the function, repeat the function again.

✎

Press any key on the remote control to cancel this

feature.

Side Grey (Light / Dark): When you watch TV with the

screen ratio set to 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme

left and right sides.

[PC490-RU]BN68-03141B-00L04.indb 16 2010-08-25 󱹙󲀹 9:53:26

17

English

03 Basic Features

 Viewing TV using the 3D function

IMPORTANT HEALTH AND SAFETY INFORMATION FOR

3D PICTURES.

Read and understand the following safety information

before using the TV’s 3D function.



WARNING

x

Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea and

headaches. If you experience any such symptom,

stop viewing 3D TV, remove 3D Active Glasses and

rest.

x

Watching 3D images for an extended period of time

may cause eye strain. If you feel eye strain, stop

viewing 3D TV, remove your 3D Active Glasses and

rest.

x

A responsible adult should frequently check on

children who are using the 3D function. If there are

any reports of tired eyes, headaches, dizziness, or

nausea, have the child stop viewing 3D TV and rest.

x

Do not use the 3D Active Glasses for other purposes

(such as general eyeglasses, sunglasses, protective

goggles, etc.)

x

Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving around

may result in injuries due to running into objects,

tripping, and/or falling.

3D

This exciting new feature enables you to

view 3D content. In order to fully enjoy

this feature, you must purchase a pair

of Samsung 3D Active Glasses (SSG-

2100AB, SSG-2200AR, SSG-2200KR) to

view 3D video.

Samsung 3D Active Glasses are sold

separately. For more detailed purchasing

information, contact the retailer where you purchased this TV.

■ 3D Mode: Select the 3D input format.

✎

If you want to feel the 3D effect fully, please wear

the 3D Active Glasses first, and then select

3D Mode from the list below that provides the

best 3D viewing experience.

✎

In 3D Mode, depending on the video contents,

picture setting like sharpness control may need to

be adjusted to achieve best quality.

✎

When watching 3D images, turn on 3D Active

Glasses.

3D Mode Operation

Off Turns the 3D function off.

2D  3D

Changes a 2D image to 3D.

Side by Side

Displays two images next to

each other.

Top & Bottom

Displays one image above

another.

Line by Line

Displays the images for the left

and right eye alternately in rows.

Vertical Stripe

Displays the images for the

left and right eye alternately in

columns.

Checker

Board

Displays the images for the

left and right eye alternately in

pixels.

Frequency

Displays the images for the

left and right eye alternately in

frames.

✎

“Side by Side” and “Top & Bottom” are available

when the resolution is 720p, 1080i and 1080p

in DTV, HDMI and USB mode or set to PC

connecting through HDMI/DVI cable.

✎

“Vertical Strip”, “Line by Line” and “Checker

Board” are available when the resolution is set to

PC connecting through HDMI/DVI cable.

✎

“Frequency” displays the frequency (60Hz only)

when the resolution is set to PC.

■ 3D  2D (Off / On): Displays the image for the left eye

only.

✎

This function is deactivated when 3D Mode set to

“2D  3D” or Off.

■ 3D View Point: The overall adjustment of 3D

perspective.

✎

This function is deactivated when 3D Mode set to

“2D  3D” or Off.

■ Depth: Adjusts focus / depth in “2D  3D” mode.

✎

This function is only activated when the 3D Mode

is “2D  3D”.

■ Picture Correction: Adjusts the images for the left and

right eye.

[PC490-RU]BN68-03141B-00L04.indb 17 2010-08-25 󱹙󲀹 9:53:28

18

English

Basic Features

■ 3D Auto View (Off / On): If 3D Auto View is set to On,

a “Side by Side” format HDMI signal with one of the

resolutions below is automatically switched to 3D. Here,

correct 3D information must be sent from the Standard

HDMI 3D Format.

✎

If a 3D failure occurs due to a 3D information error,

set 3D Auto View to Off and manually select a

3D Mode using the 3D button or corresponding

menu.

✎

Support resolution (16:9 only)

Resolution Frequency (Hz)

1280 x 720p 50 / 60 Hz

1920 x 1080i 50 / 60 Hz

1920 x 1080p 24 / 30 / 50 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x

1080 input.

An input resolution other than 1920 x 1080 may not be

displayed properly in 3D display or full screen mode.

How to watch the 3D image

1. Press the 3D button.

To watch in 3D, wear 3D Active Glasses and press the

power button on the glasses.

2. Select OK, then press the

ENTER



button.

3. Using the  or  buttons on your remote control,

selects the 3D Mode of the image you want to view.

✎

Some 3D modes may not be available depending

on the format of the image source.

Supported formats and operating speciﬁcations for

Standard HDMI 3D

✎

The 3D formats indicated below are recommended by

the HDMI association and must be supported.

Source signal format Standard HDMI 1.4 3D

1920x1080p@24Hz x 2 1920x2205p@24Hz

1280x720p@60Hz x 2 1280x1470p@60Hz

1280x720p@50Hz x 2 1280x1470p@50Hz

The mode is automatically switched to 3D mode for the 3D

video input in one of the formats above.

Before using 3D function...

✎

NOTE

x

You may notice a small amount of screen flickering

when watching 3D images in poor light conditions

(from a strobe light, etc.), or under a fluorescent lamp

(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the

light or turn the lamp off.

x

3D mode is automatically disabled in following cases:

when changing a channel or the input source, or

accessing Media Play or Internet@TV.

x

Some Picture functions are disabled in 3D mode.

x

PIP and Data broadcasts (MHEG / MHP) are not

supported in 3D mode.

x

3D Active Glasses from other manufacturers may not

be supported.

x

When the TV is initially powered on, may take some

time until the 3D display is optimized.

x

The 3D Active Glasses may not work properly if there

is any other 3D product or electronic devices turned

on near the glasses or TV. If there is a problem, keep

other electronic devices as far away as possible from

the 3D Active Glasses.

x

When watching pictures from a 50Hz 3D source with

its Game mode On, visually-sensitive viewers may

see some flicker on bright images.

x

Photos of Media Play are shown in “2D  3D”

mode only.

x

If you lie on your side while watching TV with 3D

active glasses, the picture may look dark or may not

be visible.

x

Be sure to stay within the viewing angle and optimum

TV viewing distance when watching 3D pictures.

– Otherwise, you may not be able to enjoy proper 3D

effects.

x

The ideal viewing distance should be three times

or more the height of the screen. We recommend

sitting with viewer’s eyes on a level with the screen.

3D



























3D3D

































[PC490-RU]BN68-03141B-00L04.indb 18 2010-08-25 󱹙󲀹 9:53:29

19

English

03 Basic Features

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

 Setting up the TV with Your PC

Set the input source to PC.

Auto Adjustment



Adjust frequency values/positions and ﬁne tune the settings

automatically.

✎

Not available when connecting with an HDMI/DVI cable.

Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the centre of screen.

■ Position: Adjust the PC screen position with direction

button ( /  /  / ).

■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC may differ in which case the

same basic set-up information will almost always be applied.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution)

[Optimum: PS50C490: 1360 X 768 pixels]

y If a vertical-frequency option exists on your display

settings dialog box, the correct value is “60” or “60 Hz.”

Otherwise, just click “OK” and exit the dialog box.

Sound Menu

 Changing the Preset Sound Mode

SRS TheaterSound



■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Amplify: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

 Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R: Adjusts the balance between the right and

left speaker.

■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

■ Reset: Resets the equalizer to its default settings.

 Sound Systems, Etc.

SRS TruSurround HD (Off / On)



(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog can

be heard more clearly.

Audio Language

(digital channels only)

Change the default value for audio languages.

✎

The available language may differ depending on the

broadcast.

[PC490-RU]BN68-03141B-00L04.indb 19 2010-08-25 󱹙󲀹 9:53:29

20

English

Basic Features

Audio Format

(digital channels only)

When sound is emitted from both the main speaker and the

audio receiver, a sound echo may occur due to the decoding

speed difference between the main speaker and the audio

receiver. In this case, use the TV Speaker function.

✎

Audio Format option may differ depending on the

broadcast. 5.1ch Dolby digital sound is only available

when connecting an external speaker through an

optical cable.

Audio Description

(not available in all locations)

(digital channels only)

This function handles the Audio Stream for the

AD (Audio Description) which is sent along with

the Main audio from the broadcaster.

■ Audio Description (Off / On): Turn the

audio description function on or off.

■ Volume: Adjust the audio description volume.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■ Night: This mode provides an improved sound

experience compared to Normal mode, making almost

no noise. It is useful at night.

Speaker Select (External Speaker /

TV Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

✎

When Speaker Select is set to External Speaker

x

TV Speaker: Off, External Speaker: On

✎

When Speaker Select is set to TV Speaker

x

TV Speaker: On, External Speaker: On

✎

If there is no video signal, both speakers will be mute.

Additional Setting

(digital channels only)

■ DTV Audio Level (MPEG / HE-AAC): This function

allows you to reduce the disparity of a voice signal

(which is one of the signals received during a digital TV

broadcast) to a desired level.

✎

According to the type of broadcast signal, MPEG

/ HE-AAC can be adjusted between -10dB and

0dB.

✎

To increase or decrease the volume, adjust

between the range 0 and -10 respectively.

■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)

is used to provide digital sound, reducing interference

going to speakers and various digital devices such as a

DVD player.

Audio Format: During the reception of a digital TV

broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital.

Audio Delay: Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio

output using an external device such as an AV receiver

(0ms ~ 250ms).

■ Dolby Digital Comp (Line / RF): This function minimizes

signal disparity between a dolby digital signal and a

voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎

Select Line to obtain dynamic sound, and RF

to reduce the difference between loud and soft

sounds at night time.

Line: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

 Selecting the Sound Mode

When you set to Dual



-



, the current sound

mode is displayed on the screen.

DUAL

Audio

Type

Dual



-



Default

A2

Stereo

Mono Mono

Automatic

change

Stereo

Stereo  Mono

Dual



 Dual



Dual



NICAM

Stereo

Mono Mono

Automatic

change

Stereo

Mono  Stereo

Dual

Mono  Dual



Dual





Dual



AD

[PC490-RU]BN68-03141B-00L04.indb 20 2010-08-25 󱹙󲀹 9:53:30

Страница загружается ...

Samsung PS-50 C490 B3W Руководство пользователя

Samsung PS-50 C490 B3W Руководство пользователя

Похожие модели бренда

Модели других брендов