Samsung PS42A451P1 Руководство пользователя

Благодарим за приобретение продукта компании

Samsung. Для получения более полного обслуживания

зарегистрируйте свое устройство по адресу:

www.samsung.com/global/register

удивительные возможности

Плазменный

телевизор

руководство

пользователя

BN68-01417F-01

Связывайтесь с SAMSUNG по всему миру

Если у вас есть предложения или вопросы по продуктам Samsung, связывайтесь с

информационным центром Samsung.

Country

Customer Care Centre 

Web Site

RUSSIA 8-800-555-55-55 www.samsung.ru

UKRAINE 8-800-502-0000 www.samsung.com

Модель_______Серийный номер_________

PS42A450

PS42A451

PS50A450

PS50A451

BN68-01417F-00Rus.indb 1 2008-4-8 9:45:39

English - 2

User Instructions

 Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the

plasma monitor panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of the screen when displaying a still image.

 Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place

over 2000m in height so do not install and operate there.

 Heat on the top of the PDP TV

The top side of the product may be hot after long period of use as heat dissipates from the panel

through the vent hole in the upper part of the product. This is normal and does not indicate any defect

or operation failure of the product. However, children should be prevented from touching the upper

part of the product.

 The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding

environment such as temperature or humidity. This is normal and not a defect of the unit.

 Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require

sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.

These pixels will have no impact on the performance of the product.

 Avoid operating the TV at temperatures below 5°C(41°F)

 A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave traces

of borders displayed on the left, right and centre of the screen caused by the

difference of light emission on the screen. Playing a DVD or a game console

may cause similar effect to the screen. Damages caused by the above effect are

not covered by the Warranty.

 Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when

displaying still images.

 Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

 Installation

Be sure to contact an authorized service centre, when installing your set in a location with heavy

dust, high or low temperatures, high humidity, chemical substance and where it operates continually

such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre. (See back cover for more informations.)

BN68-01417F-00.indb 2 2008-04-07 오후 7:10:44

English - 3

Symbols

☛ ➢

Press

Important

Note

Contents

General Information

 User Instructions ............................................. 2

 Checking Parts ................................................ 4

 Using the Stand-Base ..................................... 4

 Control Panel ................................................. 5

 Connection Panel ............................................ 6

 Viewing the Remote Control ........................... 8

Operation

 Switching Your Television On and Off ............. 9

 Viewing the Menus .......................................... 9

 Plug & Play Feature ...................................... 10

 Using the TOOLS Button .............................. 12

 Viewing an External Signal Sources ............. 12

 Editing Device Names ................................... 13

Channel Control

 Storing Channels Automatically .................... 13

 Storing Channels Manually ........................... 14

 Adding / Locking Channels ........................... 15

 Sorting the Stored Channels ......................... 16

 Assigning Names to Channels ...................... 16

 Fine Tuning Channel Reception .................... 17



 LNA(LowNoiseAmplier) ............................

17

Picture Control

 Changing the Picture Standard ..................... 18

 Customizing the Picture Settings .................. 18



ConguringDetailedSettingsonthePicture

... 19

 Picture Options ............................................. 20

 Resetting the Picture Settings to the Factory

Defaults ......................................................... 22

Sound Control

 Sound Features ............................................ 23

 Selecting the Sound Mode

(depending on the model) ............................. 24

 Connecting Headphones (Sold separately) .. 24

Function Description

 Time Features ............................................... 25

 Language / Melody / Light Effect /

Entertainment / Energy Saving/ PIP .............. 26

PC Display

 Setting up Your PC Software

(Based on Windows XP) ............................... 27

 Input Mode (PC) ............................................ 28

 Setting the PC ............................................... 29

About Anynet+



What is Anynet+? ..........................................

30



Connecting Anynet+ Devices ........................

30



Setting Up Anynet+ ......................................

31



Scanning and Switching between

Anynet+ Devices ........................................... 31



Recording ......................................................

32



Listening through a Receiver ........................

33



Check Points before Requesting Service .....

33

Appendix

 Teletext Feature (depending on the model) .. 34

 WallMountKitSpecications(VESA) ........... 36

 Wall- mount adjustment (Sold separately) .... 37

 How to assemble the Stand-Base

(depending on the model) ............................. 38

 Troubleshooting ............................................ 39

 Specications ................................................ 40

English

BN68-01417F-00.indb 3 2008-04-07 오후 7:10:44

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

Power Cord Cloth-Clean

Warranty Card/

Registration Card/

Safety Guide Manual

Cover-Bottom / Screws (2ea)

(Refer to page 38)

Ferrite Core for Power Cord Ferrite Core for S-Video

Sold Separately

Antenna Cable Component Cables Audio Cables PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

➢

Ferrite Core (Power Cord, S-Video)

The ferrite cores are used to shield the cables from interference.

When connecting a cable, open the ferrite core and clip it around the cable near

the plug.

Using the Stand-Base

➢





Two or more people should carry

the PDP. Never lay the PDP on the

floor because of possible damage

to the screen. Always keep the

PDP upright.







The PDP can rotate 20 degrees in

right and left directions.

-20° ~ 20°

BN68-01417F-00.indb 4 2008-04-07 오후 7:10:48

English - 5

Control Panel

1

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component,

PC, HDMI1, HDMI2, HDMI3).

➢

In the on-screen menu, use this button as

you would use the ENTER button on the

remote control.

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

– +

Press to increase or decrease the volume. In

the on-screen menu, use the – + buttons

asyouwouldusethe◄and►buttonsonthe

remote control.

4

C/P.

Press to change channels. In the on-screen

menu, use the C/P. buttons as you

wouldusethe▲and▼buttonsontheremote

control.

5

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6

POWER

Press to turn the TV on and off.

7

Remote Control Sensor

Aim the remote control towards this spot on the

TV.

8

Speakers

Front (or Side) Panel

➢

The product colour and shape may vary depending on the model.

BN68-01417F-00.indb 5 2008-04-07 오후 7:10:49

English - 6

Connection Panel

Continued...

☛





Whenever you connect an audio or video system to your set, ensure that all elements are

switched off.







When connecting an external device, match the colour of the connection terminal to the cable.

1

POWER IN

Connect the supplied power cord.

2

COMPONENT IN

Audio (AUDIO L/R) and video (Y/P

B/PR) inputs

for Component.

3

PC IN / AUDIO

Connect to the video and audio output jack on

your PC.

4

EXT 1, EXT 2

Inputs or outputs for external devices, such as

VCR, DVD, video game device or video disc

players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R) RGB

Video + Audio(L/R)

EXT 1 ✔ ✔ ✔

Only TV output is

available.

EXT 2 ✔ ✔

Output you can

choose.

5

Connecting external Audio Devices

Connect RCA audio signals from the TV to an

external source, such as Audio equipment.

6

SERVICE

− Connectorforservice.

− Connecttheserialjackbetweenthe

electro-motion wall mount bracket and your

TV when you want to adjust the TV viewing

angle using your remote control.

Rear Panel

➢

The product colour and shape may vary depending on the model.

Cable Television

Network

1

432 5 7

8

6

or

BN68-01417F-00.indb 6 2008-04-07 오후 7:10:53

English - 7

7

HDMI IN 1,2

− NoadditionalAudioconnectionisneeded

for an HDMI to HDMI connection.

− WhenusinganHDMI/DVIcableconnection,

you must use the HDMI IN 2 jack.

➢

What is HDMI?

- “High Definition Multimedia interface”

allows the transmission of high

definition digital video data and multiple

channels of digital audio.

- The HDMI/DVI terminal supports DVI

connection to an extended device with

the appropriate cable (not supplied).

The difference between HDMI and DVI

is that the HDMI device is smaller in

size, has the HDCP (High Bandwidth

Digital Copy Protection) coding feature

installed, and supports multi - channel

digital audio.

DVI IN (HDMI 2) AUDIO R/L

DVI audio outputs for external devices.

8

ANT IN

75ΩCoaxialconnectorforAerial/Cable

Network.

Supported modes for HDMI/DVI and Component

480i 480p 576i 576p 720p 1080i

HDMI/DVI 50Hz X X X O O O

HDMI/DVI 60Hz X O X X O O

Component O O O O O O

➢

The product colour and shape may vary depending on the model.

Side Panel

1

HDMI IN 3

Connect to the HDMI jack of a device with

HDMI output.

2

S-VIDEO or VIDEO / AUDIO L/R

Video (S-Video or Video) and audio inputs for

external devices, such as a camcorder or VCR.

3

Headphones jack

You can connect a set of headphones if you

wish to watch a television programme without

disturbing the other people in the room.

➢



Prolonged use of headphones at a high

volume may damage your hearing.

3

1

or

2

BN68-01417F-00.indb 7 2008-04-07 오후 7:10:55

English - 8

Viewing the Remote Control

1

POWER button

(turns the TV on and off)

2

Selects the TV mode directly

3

Number buttons for direct

channel access

4

One/Two-digit channel

selection

5

Temporary sound switch-off

6

Volume increase

Volume decrease

7

Channel control button

(Refer to page 15)

8

Use to quickly select

frequently used functions.

9

Control the cursor in the

menu

0

Use to see information on

the current broadcast

#

Press to select the optional

display and sound modes for

sports, cinema and games.

$

VCR/DVD Function (Rewind,

Stop, Play/Pause, Fast/

Forward)

%

Available source selection

^

Previous channel

&

Next channel

Previous channel

*

Displays the main on-screen

menu

(

TruSurround XT mode button

)

Returns to the previous

menu

a

Exit the on-screen menu

b

Picture size selection

c

Use this when connecting

a SAMSUNG DMA (Digital

Media Adapter) device

through an HDMI interface

and switching to DMA

mode.(The DMA button is

optional.)

For more information on the

operating procedures, refer

to the user manual of the

DMA. This button is available

when “Anynet+(HDMI-CEC)"

is “On” (see page 31)

d

Selects the HDMI mode

directly

e

Picture effect selection

(Refer to page 18)

Teletext Functions

(Refer to page 34)

2

Exit from the teletext display

(depending on the model)

7

Teletext store

8

Teletext size

0

Teletext reveal

!

Fastext topic selection

@

Teletext display/mix both

teletext information and the

normal broadcast

%

Teletext mode selection

(LIST/FLOF)

^

Teletext sub page

&

P :Teletext next page

P :Teletext previous page

*

Teletext index

)

Teletext hold

a

Teletext cancel

Continued...

BN68-01417F-00.indb 8 2008-04-07 오후 7:10:57

English - 9

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as

shown in the figure.

2 Install two AAA size batteries.

➢

Make sure to match the “+” and “–” ends of the

batteries with the diagram inside the compartment.

Do not mix battery types, i.e. alkaline and

manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry

place if you won’t be using the remote control for a long time. The remote control can be used up

to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

➢

If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Switching Your Television On and Off

The main lead is attached to the rear of the television.

1 Plug the main lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2 Press the (Power) button (On/Off) on the front of the television or press the POWER button on the

remote control to switch the television on. The programme that you were watching last is re-selected

automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing

Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.

➢

If the television is initially powered on, several basic customer settings proceed automatically.

Refer to “Plug & Play Feature” on page 10.

3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press

the POWER button on the remote control.

4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER

button or number buttons on the remote control.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen.

Its left side has six icons: Picture, Sound, Channel, Setup,

Input.

2 Pressthe▲or▼buttontoselectoneoftheicons.

Press the ENTER button to access the icon’s sub-menu.

3 Pressthe▲or▼buttontomovetoitemsinthemenu.

Press the ENTER button to enter items in the menu.

4 Pressthe▲/▼/◄/►buttontochangetheselecteditems.

Press the RETURN button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

Move

Enter

Exit

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

BN68-01417F-00.indb 9 2008-04-07 오후 7:10:58

English - 10

Plug & Play Feature

When the television is initially powered on, several basic

customer settings proceed automatically and subsequently.

The following settings are available.

☛

If you accidentally select the wrong country for your TV, the

characters on the screen may be wrongly displayed.

1 If the television is in standby mode, press the POWER button

on the remote control. The message Start Plug & Play is

displayed. Press the ENTER button.

2 The Language menu will automatically appear after several

seconds.

3 Selecttheappropriatelanguagebypressingthe▲or▼

button.

Press the ENTER button. The message Select ‘Home Use’

when installing this TV in your home. is displayed.

4 Pressthe◄or►buttontoselectStore Demo or Home Use,

then press the ENTER button. The message to check the

connected status of the antenna is displayed.

➢

The default selection is Home Use.

➢

We recommend setting the TV to Home Use mode for the

best picture in your home environment.

➢

Store Demo mode is only intended for use in retail

environments.

➢

If the unit is accidentally set to Store Demo mode and you

want to return to Home Use (Standard): Press the Volume

button. When the volume OSD is displayed, press and

hold the MENU button for 5 seconds.

5 Make sure that the antenna is connected to the TV.

Press the ENTER button. The Country menu is displayed.

6 Selectyourcountryorareabypressingthe▲or▼button.

Press the ENTER button.

Continued...

Plug & Play

Start Plug & Play.

OK

Enter

Plug & Play

Language

Move

Enter

English

Deutsch

Français

Italiano

▼

Plug & Play

Select ‘Home Use’

when installing this TV in your home.

Move

Enter

Store Demo Home Use

Plug & Play

Check antenna input.

Enter

OK

Plug & Play

P 1 C -- 40 MHz

0 %

Enter

Skip

Start

Skip

Plug & Play

Country

▲

United Kingdom

Austria

Eastern Europe

Others

Move

Enter

Skip

BN68-01417F-00.indb 10 2008-04-07 오후 7:10:59

English - 11

7 Press the ENTER button to start search the channels.

The channel search will start and end automatically. After

all the available channels are stored, Clock Set menu is

automatically displayed. Press the ENTER button.

8 Pressthe◄or►buttontoselectMonth, Day, Year, Hour,

or Minute.Setthesebypressingthe▲or▼button.

➢

You can set the Month, Day, Year, Hour, or Minute

directly by pressing the numeric buttons on the remote

control.

9 Press the ENTER button to confirm your setting. The

message Enjoy your viewing is displayed. When you have

finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message

will automatically disappear after several seconds.

If you want to reset this feature …

1

Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectSetup, then press the

ENTER button.

3 Press the ENTER button again to select Plug & Play.

The message Start Plug & Play is displayed.

Plug & Play

Move

Adjust

Enter

01 01 2008 00 04

Clock Set

Month Day Year Hour

Minute





OK

Enjoy your viewing

Move

Enter

Return

Plug & Play



Language : English 

Time 

Light Effect

: In Watching TV



Wall-Mount Adjustment



Melody :

Off



Entertainment

: Off



Energy Saving :

Off



PIP 

Setup

T V

BN68-01417F-00.indb 11 2008-04-07 오후 7:11:00

English - 12

Viewing External Signal Sources

You can switch between viewing signals from connected

equipment, such as a VCR, DVD, Set-Top Box, and the TV

source (broadcast or cable).

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectInput, then press the

ENTER button.

3 Press the ENTER button again to select Source List.

4 Pressthe▲or▼buttontoselectthesignalsource,then

press the ENTER button.

Available signal sources:

TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3

➢

You can choose only those external devices that are connected

to the TV.

➢

You can select these options simply by pressing the SOURCE

button on the remote control.

➢

To watch television programme again, press the TV button and

select the channel number required.

➢

You can also watch HDMI mode simply by pressing the HDMI

button on the remote control.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The

“Tools” menu changes depending on which external input mode you are viewing.

1 Press the TOOLS button.

The Tools menu will appear.

2 Pressthe▲or▼buttontoselectamenu,thenpressthe

ENTER button.

3 Pressthe▲/▼/◄/►/ENTER buttons to display, change, or use

the selected items.

For a more detailed description of each function, refer to the

corresponding page.

•

Anynet+(HDMI-CEC), see page 30

• Picture Mode, see page 18

• Sound Mode, see page 23

• Sleep Timer, see page 25

• SRS TS XT, see page 23

• Energy Saving, see page 27

• Dual I-II, see page 24

Move

Enter

Return

Source List :

TV 

Edit Name 

Anynet+ (HDMI-CEC)

Input

T V

Move

Enter

Return

TV

Ext.1  :−−−−

Ext.2  :−−−−

AV  :−−−−

S-Video  :−−−−

Component :−−−−

PC  :−−−−

HDMI1  :−−−−

HDMI2  :−−−−

HDMI3  :−−−−

Source List

T V

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

◄►

Adjust

ExitMove

BN68-01417F-00.indb 12 2008-04-07 오후 7:11:01

English - 13

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectInput, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectEdit Name, then press the

ENTER button.

4 Pressthe▲or▼buttontoselecttheexternalsourcetobe

edited, then press the ENTER button.

5 Selecttherequireddevicebypressing▲or▼,thenpressthe

ENTER button.

Available device names:

VCR, DVD, Cable STB, Satellite

STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,

IPTV, Blu-Ray, HD DVD, DMA.

6 Press the EXIT button to exit.

Storing Channels Automatically

You can scan for the frequency ranges available to you

(availability depends on your country).

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers.

However you can sort numbers manually and clear any

channels you do not wish to watch.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Press the ENTER button again. The available countries are

listed.

4 Selectyourcountrybypressingthe▲or▼button,thenpress

the ENTER button.

5 Pressthe▲or▼buttontoselectAuto Store, then press the

ENTER button.

6 Press the ENTER button again to start the search.

The search will end automatically.

➢

To stop the search before it has finished, press the MENU

or the ENTER button.

Move

Enter

Return

Source List :

TV 

Edit Name 

Anynet+ (HDMI-CEC)

Input

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

Auto Store

P 1 C -- 40 MHz

0 %

Enter

Return

Start

Move

Enter

Return

Ext.1  :−−−−

Ext.2 : −−−−

AV :

S-Video :

Component : −−−−

PC : −−−−

HDMI1 :

HDMI2 :

HDMI3 :

Edit Name

T V

----

VCR

DVD

Cable STB

Satellite STB

PVR STB

AV Receiver

Game

▼

Move

Enter

Return

Country :

United Kingdom

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

LNA : Off 

Channel

Belgium

France

Germany

Italy

Netherlands

Spain

Switzerland

United Kingdom

▼

T V

BN68-01417F-00.indb 13 2008-04-07 오후 7:11:02

English - 14

Storing Channels Manually

You can store television channels, including those received

via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you

wish to identify.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectManual Store, then press

the ENTER button.

4 Selecttherequiredoptionbypressingthe▲or▼button,then

press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

Programme (Programme number to be assigned to a channel)

− Pressthe▲or▼buttonuntilyoufindthecorrectnumber.

➢

You can also select the channel number directly by pressing the numeric buttons (0~9).

Colour System: Auto/PAL/SECAM/NTSC4.43

− Pressthe▲or▼buttontoselecttherequiredcolourstandard.

Sound System: BG/DK/I/L

− Pressthe▲or▼buttontoselecttherequiredsoundstandard.

Channel (When you know the number of the channel to be stored)

− Pressthe▲or▼buttontoselect

C (Air channel) or S (Cable channel).

− Pressthe►button,thenpressthe▲or▼buttontoselecttherequirednumber.

➢

You can also select the channel number directly by pressing the numeric buttons (0~9).

➢

If there is abnormal sound or no sound, re-select the sound standard required.

Search (When you do not know the channel numbers)

− Pressthe▲or▼buttontostartthesearch.

− Thetunerscansthefrequencyrangeuntilthefirstchannelorthechannelthatyouselectedis

received on the screen.

Store (When you store the channel and associated programme number)

− Setto

OK by pressing the ENTER button.

☛

Channel mode

 P (Programme mode): When completing tuning, the broadcasting stations in your area have

been assigned to position numbers from P00 to P99. You can select a channel by entering the

position number in this mode.

 C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

 S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

Move

Enter

Return

Programme :

P 1

Colour System : Auto 

Sound System : BG 

Channel : C --

Search : 40 MHz

Store : ?

Manual Store

T V

BN68-01417F-00.indb 14 2008-04-07 오후 7:11:02

English - 15

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add

channels.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectChannel Manager, then

press the ENTER button.

Adding channels

Using the Channel List, you can add channels.

4 Select Channel List by pressing the ENTER button.

5 Move to the ( )fieldbypressingthe▲/▼/◄/►buttons,

select a channel to be added, and press the ENTER button to

add the channel.

➢

If you press the ENTER button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out

video and audio.

6 Pressthe▲or▼buttontoselectChild Lock, then press the

ENTER button.

7 Select Onbypressingthe▲or▼button,thenpressthe

ENTER button.

8 Pressthe▲or▼buttontoselectChannel List, then press

the ENTER button.

9 Move to the ( )fieldbypressingthe▲/▼/◄/►buttons,

select a channel to be locked, and press the ENTER button.

➢

If you press the ENTER button again, the ( ) symbol next to the channel disappears and the

channel lock is canceled.

➢

A blue screen is displayed when Child Lock is activated.

10 Press the EXIT button to exit.

➢

You can select these options simply by pressing the CH LIST

button on the remote control.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

Move

Enter

Return

Channel List



Child Lock : Off 

Channel Manager

T V

Channel List

P 1 C 6

1 / 10

▲

▼

Prog.

0

C --

1 C --

2 C --

3 C --

4 C --

5 C --

6 C --

7 C --

8 C --

9 C --

Add Lock

Move Enter

Page Return

BN68-01417F-00.indb 15 2008-04-07 오후 7:11:05

English - 16

Sorting the Stored Channels

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectSort, then press the ENTER

button.

4 Selectthechannelthatyouwishtomovebypressingthe▲or

▼button,thenpressthe

ENTER button.

5 Select the number of the programme to which the channel is to

bemovedbypressingthe▲or▼button.

Press the ENTER button. The channel is moved to its new

position and all other channels are shifted accordingly.

6 Repeat steps 4 to 5 until you have moved all the channels to

the required programme numbers.

7 Press the EXIT button to exit.

Assigning Names to Channels

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectName, then press the

ENTER button.

4 Pressthe▲or▼buttontoselectthechanneltobeassigned

to a new name, then press the ENTER button.

5 Pressthe▲or▼buttontoselectaletter,anumber,ora

symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).

Moveontothepreviousornextletterbypressingthe◄or►

button, then press the ENTER button.

6 Repeat steps 4 to 5 for each channel to be assigned to a new

name.

7 Press the EXIT button to exit.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

Move

Enter

Return

Prog. Ch. Name

▲

 0 C01 −−−−− 

 1 C-- −−−−−

 2 C-- −−−−−

 3 C-- −−−−−

4 C-- −−−−−

5 C-- −−−−−

6 C-- −−−−−

7 C-- −−−−−

8 C-- −−−−−

9 C-- −−−−−

  ▼

Sort

T V

Move

Enter

Return

Prog. Ch. Name

▲

 0 C01 −−−−−

1 C- - −−−−−

 2 C-- −−−−−

 3 C-- −−−−−

4 C-- −−−−−

5 C-- −−−−−

6 C-- −−−−−

7 C-- −−−−−

8 C-- −−−−−

9 C- - −−−−−

  ▼

Name

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

BN68-01417F-00.indb 16 2008-04-07 오후 7:11:05

English - 17

Fine Tuning Channel Reception

If the reception is clear, you do not have to fine tune the

channel, as this is done automatically during the search and

store operation.

If the signal is weak or distorted, you may have to fine tune the

channel manually.

1 Press the MENU button to display the menu.

2 Pressthe▲or▼buttontoselectChannel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectFine Tune, then press the

ENTER button.

4 To obtain a sharp, and clear picture and good sound quality,

pressthe◄or►buttonuntilyoureachtheoptimalsetting.

Press the ENTER button.

➢

Press the INFO button. Fine Tune Store will change the

colour of the Channel OSD (On Screen Display) from

White to Red and add the “*” mark.

➢

To reset the fine tuning to 0, select Reset by pressing the

▲or▼button.Pressthe

ENTER button.

5 Press the EXIT button to exit.

Fine Tune

P 1

0

Adjust

Save

Return

Reset

P 1 *

Mono

Picture : Standard

Sound : Custom

SRS TS XT : Off

−−

:

−−

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Channel

T V

LNA (Low Noise Amplifier)

This function is very useful in the situation that the TV is used

in weak signal.

LNA amplifies the TV signal in the weak signal area, a low-

noise preamplifier boosts the incoming signal.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Pressthe▲or▼buttontoselectLNA, then press the ENTER

button.

4 Select Off or Onbypressingthe▲or▼button,thenpresstheENTER button.

5 Press the EXIT button to exit.

 ➢

Depending on areas, factory mode of LNA, will be set up as On or Off.

Move

Enter

Return

Country :

United Kingdom



Auto Store



Manual Store



Channel Manager



Sort



Name



Fine Tune



LNA : Off



Channel

T V

BN68-01417F-00.indb 17 2008-04-07 오후 7:11:06

English - 18

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Selecttherequiredmodebypressingthe▲or▼button,then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie

5 Selecttherequiredoptionbypressingthe▲or▼button,thenpresstheENTER button.

6 When you are satisfied with your setting, press the ENTER button.

7 Press the EXIT button to exit.

Cell Light - Contrast – Brightness – Sharpness – Colour – Tint

➢

In Analog TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.

➢

In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.

Pressthe◄or►buttonuntilyoureachtheoptimalsetting.

Changing the Picture Standard

You can select the type of picture which best corresponds to

your viewing requirements.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Selecttherequiredmodebypressingthe▲or▼button,then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie

➢

The settings values may vary depending on the input

source.

5 Press the EXIT button to exit.

➢





Choose Dynamic for viewing the TV during the day or

when there is bright light in the room.

 



Choose Standard for general TV watching mode.

 



Choose Movie when viewing the movie.

Easy Setting

1 Press the TOOLS button on the remote control.

2 Pressthe▲or▼buttontoselectPicture Mode.

3 Pressthe◄or►buttontoselecttherequiredoption.

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 90

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Tools

Anynet+ (HDMI-CEC)

PictureMode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 90

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Mode : Standard

Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings

Picture Options

Reset : OK

Picture

Dynamic

Standard

Movie

Move

Enter

Return

Move

Adjust

Exit

BN68-01417F-00.indb 18 2008-04-07 오후 7:11:07

English - 19

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Pressthe▲or▼buttontoselectDetailed Settings, then

press the ENTER button.

4 Selecttherequiredoptionbypressingthe▲or▼button,then

press the ENTER button.

Available options:

Black Adjust, Dynamic Contrast,

Gamma, Colour Space, White Balance, Flesh Tone, Edge

Enhancement

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

➢

Detailed Settings is available in Standard or Movie mode.

➢

In PC mode, you can only make changes to Dynamic

Contrast, Gamma and White Balance from among the

Detailed Settings items.

Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma: -3 ~ +3

You can adjust the middle brightness of pictures.

Pressthe◄or►buttonuntilyoureachtheoptimalsetting.

Colour Space: Auto/Native/Custom

Colour space is a colour matrix composed of red, green and blue colours.

Select your favorite colour space to experience the most natural colour.

−Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on program

sources.

 −

Native: Native Colour Space offers deep and rich colour tone.

−Custom: Adjusts the colour range to suit your preference. (see “Customizing the Colour Space”)

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

Colour is available when Colour Space is set to Custom.

Pressthe▲or▼buttontoselect

Red, Green, Blue, Yellow, Cyan or Magenta.

Press the ENTER button.

−

Red/Green/Blue: In Colour, you can adjust the RGB values for the selected colour.

Pressthe▲or▼buttontoselect

Red, Green or Blue to change it. Press the ENTER button.

Pressthe◄or►buttontodecreaseorincreasethevalueofaparticularitem.

Press the ENTER button.

−

Reset: Resets the colour space to the default values.

White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the color temperature for more natural picture colors.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the

adjusted screen.

Selecttherequiredoptionbypressingthe▲or▼button,thenpresstheENTER button.

Pressthe◄or►buttonuntilyoureachtheoptimalsetting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone:-15~+15

You can emphasize the pink tone in the picture.

Pressthe◄or►buttonuntilyoureachtheoptimalsetting.

➢

Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement: Off/On

You can emphasize object boundaries.

Move

Enter

Return

Black Adjust :

Off 

Dynamic Contrast : Medium 

Gamma : 0 

Colour Space : Native 

White Balance 

Flesh Tone : 0 

Edge Enhancement

: On 

Detailed Settings

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 90

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

BN68-01417F-00.indb 19 2008-04-07 오후 7:11:08

English - 20

Picture Options

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Pressthe▲or▼buttontoselectPicture Options, then press

the ENTER button.

4 Selecttherequiredoptionbypressingthe▲or▼button,then

press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

➢

In PC mode, you can only make changes to the Color Tone,

Size and Screen Burn Protection from among the items in

Picture Options.

Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

 ➢

When the picture mode is set to Dynamic or Standard,

Warm1 and Warm2 cannot be selected.

Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your

viewing requirements.

 −

Auto Wide: Expanding and pulling up the picture from 4:3 to

16:9 ratio.

 −16:9

: Sets the picture to 16:9 wide mode.

 −

Wide Zoom: Magnify the size of the picture more than 4:3.

Movethescreenup/downusingthe▲or▼buttonafter

selecting the bypressingthe►orENTER button.

 −

Zoom: Magnify the size of the picture vertically on screen.

 −4:3

: Sets the picture to 4:3 normal mode.

 −

Just Scan: Use the function to see the full image without

any cutoff when HDMI (720p/1080i), or Component (1080i)

signals are input.

After selecting Just Scan in HDMI (1080i) or Component

(1080i) mode

:

  Pressthe◄or►buttontoselect

, then press the ENTER button.

  Pressthe▲,▼,◄or►buttontomovethepictureup,down,leftandright.

Reset:Pressthe◄or►buttontoselectReset, then press the ENTER button. You can initialize

the setting.

  ➢

With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off

or a specific colour appears on the screen.

➢

For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)

connection of 50 and 60Hz, only the input source is supported.

➢

You can change the picture size simply by pressing the P.SIZE button on the remote control.

➢

Depending on the input source, the picture size options may vary.

➢

The items available may differ depending on the selected mode.

➢

Auto Wide function is available only in TV, Ext.1, Ext.2, AV, and S-Video mode.

➢

Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

➢

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Positioning and Sizing the screen using Zoom

Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down

directionusingthe▲or▼buttonaswellasthescreensize.

Movethescreenup/downusingthe▲or▼buttonafterselectingthe bypressingthe◄or►

button.

Resizethescreenverticallyusingthe▲or▼buttonafterselectingthe bypressingthe◄or►

button.

Continued...

Move

Enter

Return

Colour Tone :

Normal 

Size : Auto Wide 

Screen Mode : 16:9 

Digital NR : Auto 

Real 100 Hz Demo : Off 

DNle : Off 

HDMI Black Level : Normal 

Blue only mode : Off 

Screen Burn Protection 

Picture Options

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 90

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Move

Enter

Return

Auto Wide

16:9

Wide Zoom

Zoom

4:3

Just Scan

Size

T V

BN68-01417F-00.indb 20 2008-04-07 오후 7:11:09

Страница загружается ...

Samsung PS42A451P1 Руководство пользователя

Samsung PS42A451P1 Руководство пользователя

Похожие модели бренда