Yamaha YV3030MS Руководство пользователя

Бренд: Yamaha

Модель: YV3030MS

Тип: Руководство пользователя

Это руководство также подходит для

YV3030MS VIBRAPHONE

Yamaha YV3030MS — вибрафон с широким диапазоном звука и продолжительным сустейном. Он позволяет исполнять как сольные партии, так и аккомпанировать в ансамбле. Инструмент имеет 30 нот в диапазоне от С3 до С6 и отличается ярким, насыщенным звучанием. Бронзовые пластины вибрафона производят чистый, резонирующий тон, а регулируемое вибрато позволяет музыканту управлять эффектом вибрации. Yamaha YV3030MS идеально подходит как для начинающих, так и для опытных исполнителей. Его можно использовать в различных музыкальных жанрах — от классической до джазовой и популярной музыки.

VIBRAPHONE

YV3030MS

EnglishDeutschFrançaisEspañolPortuguês

Make sure to read the “PRECAUTIONS” on page 2.

Lesen Sie unbedingt die "VORSICHTSMASSNAHMEN" auf Seite 2.

Assurez-vous de lire “PRÉCAUTIONS D'USAGE” à la page 2.

Asegúrese de leer "PRECAUCIONES" en la página 2.

Certifique-se de ler "PRECAUÇÕES" na página 2.

Pусский

Owner’s Manual

Benutzerhandbuch

Mode d’emploi

Manual de instrucciones

Manual do Proprietário

Руководство пользователя

JA EN DE FR ES PT RU ZH KO

Обязательно прочтите разделы «ПРАВИЛА ТЕХНИКИ БЕЗОПАСНОСТИ» на стр. 2.

2•YV3030MS Owner’s Manual

DMI-7 1/1

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Repairs or part replacement should not be attempted unless

instructions are provided in the manual.

• Do not disassemble the gas spring. Since high-pressure gas is

sealed inside the gas spring, any attempt to disassemble it is

dangerous and creates a high risk of injury.

• Assemble the instrument in the proper sequence by following

the assembly instructions in this manual. Also, make sure to

tighten the screws or bolts regularly. Failure to do so may result

in damage to the instrument or cause the instrument to overturn,

possibly causing injury.

• When assembling or moving the instrument, always use two or

more people. Failure to do so might result in damage to the

instrument or the instrument overturning, possibly causing

injury.

• Do not place the instrument in an unstable position where it

might accidentally fall over.

• Lock both left and right casters except when moving or

transporting the instrument. Failure to do so might result in the

instrument moving or overturning, possibly causing injury.

• When lifting and transporting the instrument, support the side

frames with two or more people.

• The instrument should only be moved across smooth, flat

surfaces when using the casters. On a sloped, unstable or gravel

surface, the instrument may overturn or run out of control, and

possibly cause injury.

• Never run when moving or transporting the instrument using the

casters. Doing so can result in the instrument hitting an obstacle

or wall and causing serious injury.

• Do not go near the instrument during an earthquake. Strong

shaking during an earthquake could cause the instrument to

move or tip over, resulting in damage to the instrument or its

parts, possibly causing injury.

• When the instrument rattles, makes noise or vibrates,

immediately stop using it, and tighten all screws again. Failure to

do so may result in the instrument overturning and could

possibly cause injury.

• Never touch the rotating pulleys. Doing so may result in pinching

your fingers, etc.

• Do not insert your hands or feet in any gaps on the casters or

active parts of the pedal. Doing so may result in them being

pinched and could possibly cause injury.

• Do not play around the instrument. Doing so may cause you to

bump into the instrument, possibly resulting in injury. It also

may cause the instrument to overturn. Do not allow children to

play around the instrument.

• Do not lean, rest your weight or place heavy objects on the

instrument. Doing so may result in the instrument overturning,

damage to the tone bars or frame, or injury to you or others.

• Keep small parts out of the reach of infants. Your children may

accidentally swallow them.

Do not disassemble

Assembly

Transportation and Installation

Handling

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.

YV3030MS Owner’s Manual • 3

NOTICE

To avoid the possibility of damage to the product, follow

the notices below.

 Handling

• Do not strike the tone bars with glockenspiel mallets or

any other solid objects. Doing so may dent or scratch

the tone bars, altering their pitch.

• Do not use the instrument in locations with poor ventila-

tion.

• When moving the instrument, make sure all caster stop-

pers are released. Lift the instrument slightly whenever

moving it over surfaces that are not smooth or flat.

• When moving the instrument, move it gently avoiding

shocks and impacts. The instrument is sensitive to

shocks and may become damaged.

• If the instrument is often moved, screws, parts, etc., may

become loose. After moving the instrument, check and

make sure all screws, parts, etc., are firmly fastened.

Firmly tighten all loose items.

• Do not apply excessive force to lift the frame end as it

may pull the gas spring off from the leg.

• Do not expose the instrument to rain, water, excessive

dust or vibrations, or extreme cold or heat (such as in

direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of instrument disfiguration or

malfunction.

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the instrument.

 Maintenance

• When cleaning the tone bars, wipe with a soft and dry

cloth. Stains that are visible may be wiped off using a

small amount of ethyl alcohol applied to a soft cloth. Do

not use paint thinners, solvents or a wet cloth.

INFORMATION

 Casters

Before playing the instrument, make sure the casters and

legs are parallel. As the angle between the leg and the

caster approaches at a right angle, a rattling sound is more

likely to be generated from the caster when playing.

 About this manual

• The illustrations as shown in this manual are for instruc-

tional purposes only, and may appear somewhat differ-

ent from those on your instrument.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

4•YV3030MS Owner’s Manual

Introduction

Thank you for purchasing the Yamaha VIBRAPHONE YV3030MS.

This vibraphone, can be used in school performances or playing by hobbyists.

To get full use and performance enjoyment from this instrument, please read this owner’s manual carefully before using it. After you

have read the manual, keep it in a safe and handy place for future reference.

For handling a vibraphone variable-speed driver, refer to the manual bundled with the vibraphone variable-speed driver.

Confirmation of Packing Contents

Please make sure your package includes the parts shown below before assembling the instrument.

* If any parts are missing, please contact your dealer or qualified Yamaha service personnel.

q Owner’s Manual

(this document)

w Main unit × 1 (tone bars, frame, damper,

driver attachment)

NOTE

A vibraphone variable-speed driver YVD20 (sold separately) and

an AC adaptor (sold separately) are required for rotating the fans

of the YV3030MS.

t Resonators (natural tone side) × 1

y Resonators (accidental tone side) × 1

u Drop cover × 1

i M8 socket screw × 2, M6 socket screw × 7,

cup head square neck bolt × 1, wing nut × 1

* These parts (M6 socket screw × 1, cup head square neck bolt,

and wing nut) for the YV3030MS are specifically used for

assembling the vibraphone variable-speed driver YVD20 (sold

separately). Be careful not to lose them.

o Hex key × 1

!0 Yamaha representative or authorized distributor list x1

VIBRAPHONE

YV3030MS

Owner’s Manual

Benutzerhandbuch

Mode d’emploi

Manual de instrucciones

Manual do Proprietário

EnglishDeutschFrançaisEspañolPortuguês

JA EN DE FR ES PT ZH KO

Make sure to read the “PRECAUTIONS” on page 2.

Lesen Sie unbedingt die "VORSICHTSMASSNAHMEN" auf Seite 2.

Assurez-vous de lire “PRÉCAUTIONS D'USAGE” à la page 2.

Asegúrese de leer "PRECAUCIONES" en la página 2.

Certifique-se de ler "PRECAUÇÕES" na página 2.

e Legs × 2

r Pedal stay × 1

YV3030MS Owner’s Manual • 5

Part Names

Assembly

When assembling the instrument, always use two or more people.

Assemble the instrument in a place where there is sufficient room.

1. Align the white marks on the left leg and pedal

stay, and then connect the left leg, pedal stay and

right leg.

In this step, also turn the slant stay connectors upward and

the damper pedal towards to you.

2. Using the included hex key, temporarily secure

the four screws.

Use the larger screws to secure the pedal stay.

Side frame

Tone bars (natural tone)

Pedal stay

Caster with stopper

Side frame

Resonators

(accidental tone)

Gas spring

Resonators

(natural tone)

Damper pedal

Damper belt

Caster with stopper

Gas spring

Tone bars (accidental tone)

Damper

Driver attachment

Slant stay

Right leg

Left leg

CAUTION

Right leg

Left leg

Pedal stay

Be careful not to pinch

your fingers!

CAUTION

Damper pedal

Slant stay

White marks

Slant stay

connectors

6•YV3030MS Owner’s Manual

Assembly

3. Tighten the screws in this order: q slant stays, w

pedal stays.

4. Set the main unit upside down.

To prevent damage to the floor and the main unit, leave the

main unit in the shipping package, or place a rug or soft

cloth on the floor underneath the main unit.

5. Turn the leg assembly upside down, put it on the

main unit, and then secure it with the four screws.

NOTE

If the direction of legs and main unit is not correct, the location of

pins and holes may be misaligned, and may not be assembled

properly.

6. To prevent the pedal from moving uncontrollably,

secure the damper by hooking the damper belt tip

to the hook of the main unit.

7. Stand the instrument upright while being careful

to avoid overturning or falling of instrument.

8. Lock the casters by pressing the stoppers on the

left and right casters.

9. Lower the damper pedal.

Unbuckle the damper belt to avoid excessive tension to the

belt when raising the position of the instrument height in

step 11.

Be careful not to pinch

your fingers!

CAUTION

Damper belt

YV3030MS Owner’s Manual • 7

Assembly

10.

Attach the resonators.

Insert the resonators from underneath the main unit and

rest the high sound side and then the low sound side onto

the resonator holders.

NOTE

• Make sure not to confuse the natural tone side and acci-

dental tone side resonators.

• Take care not to bump the resonators against the legs

etc.

11.

Adjust the instrument height.

Pulling the lever on the left and right leg raises the height,

while firmly pressing down on the side frame while pulling

the lever lowers the height. When you release the lever, the

instrument height is fixed at that height.

NOTE

• The legs have a scale that serves as a guide for adjust-

ing the height.

• We recommend that you lower the height slightly more

than you intend, and then make minor adjustments

while raising it little by little.

• Adjust the left and right height at the same time to main-

tain the level of the tone bars.

• Grease is applied to the cylinders of the legs to allow for

smooth height adjustment. If the grease sticks to your

hands, rinse it off with running water.

• Unbuckle the damper belt when you re-adjust the instru-

ment height.

12.

Adjust the depth of the pedal pressing.

Unbuckle the damper belt, adjust the position of the pedal,

and then fix it by buckling the belt.

13.

Make sure all screws are tightened securely.

Assembly is now complete.

Resonator

Holders

First, place the high sound side onto the corre-

sponding resonator holders.

To engage the low sound side, lift it over the resona-

tor holders, and then insert it into the gap between

the two holders, as shown in the illustration.

Resonator

Holders

Accidental Tone Side

Resonators

Low Sound

Side

High Sound

Side

Lever

Damper pedal

3–4 cm

Floor

8•YV3030MS Owner’s Manual

Specifications

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website

and download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check

with your Yamaha dealer.

 Comparison with piano keyboard

Range Three octaves: F33–F69

Bars Aluminum alloy

Height Adjustable From 66 cm to 85 cm

Dimensions (W×D) 127 cm × 74 cm

Weight 35 kg

Included Accessories Drop cover, hex key

Separately Sold Accessories Vibraphone variable-speed driver (YVD20)

YV3030MS

Middle C

YV3030MS Owner’s Manual • 9

MEMO

VDF8380

Manual Development Group

Published 03/2021

POTO-B0

Yamaha YV3030MS Руководство пользователя

Бренд: Yamaha

Модель: YV3030MS

Тип: Руководство пользователя

Это руководство также подходит для

YV3030MS VIBRAPHONE

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha YV3030MS User manual
français: Yamaha YV3030MS Manuel utilisateur
italiano: Yamaha YV3030MS Manuale utente
español: Yamaha YV3030MS Manual de usuario
Deutsch: Yamaha YV3030MS Benutzerhandbuch
Nederlands: Yamaha YV3030MS Handleiding
português: Yamaha YV3030MS Manual do usuário
dansk: Yamaha YV3030MS Brugermanual
polski: Yamaha YV3030MS Instrukcja obsługi
čeština: Yamaha YV3030MS Uživatelský manuál
svenska: Yamaha YV3030MS Användarmanual
日本語: Yamaha YV3030MS ユーザーマニュアル
Türkçe: Yamaha YV3030MS Kullanım kılavuzu
suomi: Yamaha YV3030MS Ohjekirja
română: Yamaha YV3030MS Manual de utilizare

Yamaha YV3030MS Руководство пользователя

Это руководство также подходит для

Yamaha YV3030MS Руководство пользователя

на других языках

Похожие модели бренда