Sony CDX-C8000RX Инструкция по применению

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

Инструкция по эксплуатации

 2000 Sony Corporation

GB

ES

PT

SE

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Перед установкой и подсоединениями прочитайте прилагаемую инструкцию

по установке и подсоединению.

FM/MW/LW MiniDisc

Player

MDX-C8500R

3-045-187-12 (1)

RU

FM/MW/LW Compact Disc

Player

CDX-C8000RX CDX-C8000R

2

Welcome !

Thank you for purchasing the Compact Disc

Player/MiniDisc Player. This unit lets you

enjoy a variety of features using the following

controller accessories:

Optional accessories

Card remote commander RM-X91

Rotary commander RM-X4S

In addition to the CD/MD playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you playback a CD TEXT disc*

2

.

*

1

You can connect an MD changer, a CD changer,

an MD player, or a CD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

This information is recorded on the disc.

You can change the display language to

English, Spanish, Portuguese, or Swedish.

Some display indications do not appear in

the language you select.

Precautions

CLASS

PRODUCTLASER

1

This label is located on the bottom of the

chassis (CDX-C8000RX/C8000R only).

CAUTION INVISIBLE

DO NOT STARE INTO BEAM OR

VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION WHEN OPEN

This label is located on the drive unit’s internal

chassis (CDX-C8000RX/C8000R only).

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of the

two-speaker system, set the fader control to

the centre position.

•If your car is equipped with a power aerial, it

will extend automatically while the unit is

operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the CD/MD player. Should this occur, the unit

will not operate properly. In this case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the unit and CD/MD.

Sugary residues on the unit or CD/MD may

contaminate the lenses inside the unit, reduce

the sound quality, or prevent sound

reproduction altogether.

3

Notes on CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc as follows.

Handle the disc by its edge. To keep the disc

clean, do not touch the surface.

Do not stick paper or tape on the labelled

surface.

If you use the discs explained below, the sticky

residue can cause the CD to stop spinning and

may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that

have a sticky residue on the surface (for

example from peeled-off stickers or from ink,

or glue leaking from under the stickers).

There are paste residue

Ink is sticky

Do not use rental CDs with old labels that are

beginning to peel off.

Stickers that are beginning

to peel away, leaving a

sticky residue

Do not use your CDs with labels or stickers

attached.

Labels are attached

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in the

temperature inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners or antistatic

spray intended for analog discos.

Notes on CD-R discs

•You can play CD-Rs (recordable CDs) on this

unit. However depending on the conditions

of the recording equipment or the CD-R disc

itself, some CD-Rs cannot be played on this

unit.

•You cannot play a CD-R that is not finalized

(Finalization is necessary for a recorded CD-

R disc to be played on the audio CD player).

•You cannot play CD-RWs (rewritable CDs)

on this player.

When you play 8 cm CDs

Use the optional Sony compact disc single

adaptor (CSA-8) to protect the CD player from

damage.

4

Notes on attaching labels

Be sure to attach labels on cartridges correctly,

as failing to do so may cause the MD to

become stuck in the unit.

•Attach the label in a suitable position.

•Remove old labels before putting new ones

on.

•Replace labels that are beginning to peel

away from the MD.

Cleaning

Wipe the surface of the MD cartridge from

time to time with a soft dry cloth.

Notes on MDs

Since the disc itself is housed in a cartridge,

free from accidental contact with your fingers

and dust, MDs can withstand a certain degree

of the rough handling. However, dirt or dust

on the surface of the cartridge or a warped

cartridge may cause a malfunction. Observe

the following for best results.

Never touch the surface of the disc itself by

deliberately opening the shutter on the

cartridge.

When you eject the MD, the shutter may be

open. In such a case, close the shutter

immediately.

Do not expose the MD to direct sunlight or

heat sources such as hot air-ducts. Do not leave

it in a car parked in direct sunlight where there

can be a considerable rise in temperature.

Make sure the MD is not left on the dashboard

or rear tray of a car, etc. where the temperature

can also be excessive.

5

Table of contentsTable of contents

Location of controls ................................................. 6

Getting Started

Resetting the unit ................................................ 8

Detaching the front panel .................................. 8

Turning the unit on/off ..................................... 9

How to use the menu ......................................... 9

Setting the clock .................................................. 9

CD/MD

Listening to a CD with

CDX-C8000RX/CDX-C8000R only ........... 10

Listening to an MD with

MDX-C8500R only ....................................... 11

Playing a CD or MD

(with optional CD/MD unit) ..................... 12

Playing tracks repeatedly

— Repeat Play .............................................. 14

Playing tracks in random order

— Shuffle Play .............................................. 14

Labelling a CD

— Disc Memo (For a CD unit with the

custom file function).................................... 15

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit) ....................... 16

Selecting specific tracks for playback

— Bank (For a CD unit with the custom file

function) ........................................................ 17

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................. 18

Memorising only the desired stations............ 18

Receiving the memorised stations .................. 19

RDS

Overview of the RDS function ........................ 20

Displaying the station name............................ 20

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 20

Listening to traffic announcements ................ 22

Presetting the RDS stations with the AF and

TA data .......................................................... 23

Locating a station by programme type .......... 23

Setting the clock automatically ....................... 24

DAB

Overview of DAB.............................................. 25

Basic operations of DAB .................................. 25

Presetting DAB services automatically

— BTM ......................................................... 26

Presetting DAB services manually

— Manual Preset Memory ......................... 27

Listening to a DAB programme ...................... 28

Settings on the audio reception....................... 29

Locating a DAB service

by programme type (PTY) .......................... 29

DSP

Setting the equalizer ......................................... 30

Selecting the listening position ....................... 31

Selecting a soundstage menu

— Dynamic Soundstage Organizer

(DSO) ............................................................. 31

Adjusting the balance (BAL) ........................... 32

Adjusting the front and rear fader ................. 32

Adjusting the volume of the subwoofer(s).... 33

Listening to each programme source in its

registered DSO

— Source Sound Memory (SSM) ............... 34

Selecting the spectrum analyzer ..................... 34

Other Functions

Labelling the rotary commander .................... 35

Using the rotary commander .......................... 35

Attenuating the sound ..................................... 37

Changing the sound and display settings ..... 37

Additional Information

Maintenance....................................................... 38

Dismounting the unit ....................................... 39

Specifications ..................................................... 40

Troubleshooting guide ..................................... 41

6

Location of controls

CDX-C8000RX/CDX-C8000R

/MDX-C8500R

D

I

S

C

+

P

R

S

T

+

-

D

I

S

C

–

P

R

S

T

-

LIST

DSPL

AF

OFF

PTY

ENTER

MENU

SOUND

1 2 3 4 56

SOURCE

-

SEEK/AMS

REP SHUF

TA

OPEN

MODE

DSO

Refer to the pages listed for details.

1 Volume control dial

2 MENU button 9, 13, 15, 16, 17, 18, 19,

21, 23, 24, 26, 27, 29, 30, 32, 33, 34, 38

3 DISC/PRST +/– (cursor up/down) button

9, 13, 15, 16, 17, 18, 19, 21, 23, 24, 26,

27, 29, 30, 32, 33, 34, 38

During radio reception:

Preset stations select

19, 25, 26, 27

During CD/MD playback:

Disc change 13

4 Z (eject) button (located on the front

side of the unit behind the front

panel) 10, 11

5 DSPL/PTY (display mode change/

programme type) button 12, 13, 15,

20, 24, 29

6 LIST button

Disc Memo 15

List-up 16, 28

7 SOURCE (Tuner/CD/MD) button

9, 11, 12, 13, 16, 18, 19, 25, 26, 30, 31,

32, 33, 34

8 Display window

9 OPEN button 8, 10, 11, 39

0 DSO button 32

qa SOUND button 30, 31, 32, 33

qs Reset button (located on the front side

of the unit behind the front panel) 8

qd OFF button* 8, 9, 11

qf SEEK/AMS +/– (cursor left/right) button

9, 13, 15, 17, 19, 21, 23, 24, 25, 29, 30,

31, 32, 33, 34, 38

Seek 17, 18, 19, 25, 27

Automatic Music Sensor 13

Manual search 19

qg ENTER button 9, 10, 13, 15, 16, 17, 18,

19, 21, 23, 24, 26, 27, 28, 29, 30, 32, 33,

34

qh MODE button

During radio reception:

BAND select 18, 19, 22, 25

During CD or MD playback:

CD/MD unit select 12, 16

qj Receptor for the card remote

commander

qk Number buttons

During radio reception:

Preset number select 18, 19, 21,

26, 27

During CD/MD playback:

(1) REP 14

(2) SHUF 14

ql AF button 20, 21, 23

w; TA button 22, 23

* Warning when installing in a car

without ACC (accessory) position

on the ignition key switch

Be sure to press (OFF) on the unit for

two seconds to turn off the clock

display after turning off the engine.

When you press (OFF) only

momentarily, the clock display does not

turn off and this causes battery wear.

7

Location of controls

Card remote commander RM-X91

(option)

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

1 OFF button

2 MENU button

3 SOURCE button

4 SEEK/AMS (cursor </,) buttons

5 SOUND button

6 DSPL/PTY button

7 ATT button

8 LIST button

9 DISC/PRST (cursor M/m) buttons

0 ENTER button

qa MODE button

qs VOL buttons

OFF

SEEK SEEK

OPEN/CLOSE

MENU LIST

SOUND

ENTER

DSPL MODE

VOLATT

DISC

SOURCE

Replacing the lithium battery

When the battery becomes weak, the range of

the card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery.

Notes on lithium battery

•Keep the lithium battery out of the reach of

children. Should the battery be swallowed,

immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a

good contact.

•Be sure to observe the correct polarity when

installing the battery.

•Do not hold the battery with metallic

tweezers, otherwise a short-circuit may

occur.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

+ side up

x

A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote

commander unless (SOURCE) on the unit is pressed or a disc is inserted to activate the unit first.

8

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel

to the right side, and pull out the left

side of the front panel.

Notes

• Do not put anything on the inner surface of the

front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Reset button

1

2

Attaching the front panel

Place the hole A in the front panel onto the

spindle B on the unit as illustrated, then push

the left side in.

Notes

• Be careful not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

B

A

x

9

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert a disc in the unit. For

details on operation, refer to page 10 (CD/MD)

and page 18 (Radio).

Turning off the unit

Press (OFF) to stop CD/MD playback or radio

reception (the key illumination and display

remains on.)

Press (OFF) for two seconds to completely

turn off the unit.

Note

If your car has no ACC position on the ignition key

switch, be sure to turn the unit off by pressing

(OFF) for two seconds to avoid car battery wear.

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose up/down (+/– of (DISC/PRST)), or

choose left/right (–/+ of (SEEK/AMS)).

(DISC/PRST)

(SEEK/AMS)

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Clock”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (DISC/PRST) to set

the hour.

3 Press (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (DISC/PRST) to set

the minute.

continue to next page t

(+): To select upwards

(–) : To select downwards

(–) : To select

leftwards

(+) : To select

rightwards

SOURCE

10

2 Press (ENTER).

The clock starts.

After the clock setting is completed, the

display returns to normal playback mode.

Tip

You can set the clock automatically with the RDS

feature (see page 24).

Note

In the initial setting, the clock indication appears

while the unit is turned off.

When you select the “on” setting of the “D.info”

item (page 37), you can see the clock indication in

the upper part of the display while you are

enjoying any source.

Labelled side up

CD/MD

CDX-C8000RX/CDX-C8000R:

In addition to playing a CD with this unit

alone, you can also control external CD/MD

units.

MDX-C8500R:

In addition to playing an MD with this unit

alone, you can also control external CD/MD

units.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you playback

a CD TEXT disc.

Listening to a CD

with CDX-C8000RX/CDX-

C8000R only

1 Press (OPEN) and insert the CD.

Playback starts automatically.

2 Close the front panel.

Tip

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

11

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears.

When the last track on the CD is

over

The track number indication returns to “1, ” and

playback restarts from the first track of the CD.

To Press

Stop playback (OFF)

Eject the CD (OPEN) then Z

For details on operation, refer to

“Changing the display item” (page 12),

“Automatically scrolling a disc name,”

“Locating a specific track,”

“Locating a specific point in a track,” and

“Locating a disc” (page 13).

Listening to an MD with

MDX-C8500R only

1 Press (OPEN) and insert the MD.

Playback starts automatically.

2 Close the front panel.

If an MD is already inserted, press (SOURCE)

repeatedly until “MD” appears to start

playback.

The title of the MD* and the track title will

appear in the display window, then the

playing time will appear.

* Only if these titles are prerecorded on the MD.

When the last track on the MD is

over

The track number indication returns to “1, ”

and playback restarts from the first track of the

MD.

To Press

Stop playback (OFF)

Eject the MD (OPEN) then Z

For details on operation, refer to

“Changing the display item” (page 12),

“Automatically scrolling a disc name,”

“Locating a specific track,”

“Locating a specific point in a track,” and

“Locating a disc” (page 13).

Labelled side up

MD indication

Track number Elapsed playing time

Track number

Elapsed playing time

CD indication

12

When you connect an optional CD unit, you

can label CD and CD TEXT discs with a

personalised name using the disc memo

function. Refer to “Labelling a CD” (page 15).

However, if you use personalised labels, they

will always take priority over the original CD

TEXT information when such information is

displayed.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 37).

Playing a CD or MD

(with optional CD/MD unit)

1 Press (SOURCE) repeatedly to select

“CD“ or “MD.“

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

All the discs in the current CD/MD unit is

played from the top.

Changing the display item

Each time you press (DSPL/PTY) during MD,

CD or CD TEXT disc playback, the item

changes as follows:

V

Disc number*

1

/Track number/

Elapsed playback time

V

Disc name*

2

/Artist name*

3

V

Track name*

4

V

FM1 frequency*

5

*

1

While an optional CD/MD unit is connected.

*

2

If you have not labelled the CD or CD TEXT disc,

or if there is no disc name prerecorded on the

MD,“NO D.Name” appears in the display.

*

3

If you playback a CD TEXT disc, the artist name

appears in the display after the disc name.

(Only for CD TEXT discs with the artist name.)

*

4

If the track name of a CD TEXT disc or MD is not

prerecorded,“NO T.Name” appears in the

display.

*

5

While the AF/TA function is activated.

13

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

an MD or a CD TEXT disc exceeds 10

characters and the Auto Scroll function is on,

information automatically scrolls across the

display as follows:

• The disc name appears when the disc has

changed (if the disc name is selected as the

display item).

• The track name appears when the track has

changed (if the track name is selected as the

display item).

• The disc or track name appears depending on

the setting when you press (SOURCE) to select

an MD or CD TEXT disc.

If you press (DSPL/PTY) to change the display

item, the disc or track name of the MD or CD

TEXT disc is scrolled automatically whether

you set the function on or off.

1 During playback, press (MENU).

2 Press either side of (DISC/PRST)

repeatedly until “A.Scrl” appears.

3 Press (+) side of (SEEK/AMS) to select

“A.Scrl on.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.Scrl off” in

step 3 above.

Note

For some CD TEXT discs with very many characters,

the following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Locating a disc

— Disc Selection

When an optional CD/MD unit is

connected, press either side of

(DISC/PRST) to select the desired disc.

The desired disc in the current optional

CD/MD unit begins playback.

SOURCE

To locate

preceding

tracks

To locate

succeeding

tracks

To search

forward

To search

backward

SOURCE

14

LIST

DSPL

PTY

ENTER

1 2 3 4 56

-

SEEK/AMS

REP SHUF

MODE

LIST

DSPL

PTY

ENTER

1 2 3 4 56

-

SEEK/AMS

REP SHUF

MODE

Playing tracks in random

order — Shuffle Play

You can select:

•Shuf 1 – to play the tracks on the current disc

in random order.

•Shuf 2 – to play the tracks in the current

optional CD/MD unit in random order.

•Shuf All – to play all the tracks in all the

optional CD/MD units in random order.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

B Shuf 1 B Shuf 2*

1

B Shuf All*

2

Shuf off b

*

1

“Shuf 2” is only available when you connect

one or more optional CD/MD units.

*

2

“Shuf All” is only available when:

• you connect one or more optional CD

units, or two or more MD units

(CDX-C8000RX/C8000R).

• you connect one or more optional MD

units, or two or more CD units

(MDX-C8500R).

Shuffle Play starts.

To return to normal playback mode, select

“Shuf off” in the step above.

Playing tracks repeatedly

— Repeat Play

The disc in the main unit will automatically

repeat itself when it reaches the end. As repeat

play, you can select:

•Repeat 1 – to repeat a track.

•Repeat 2 – to repeat a disc in the optional

CD/MD unit.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

B Repeat 1 B Repeat 2*

Repeat off b

* “Repeat 2” is only available when you

connect one or more optional CD/MD units.

Repeat Play starts.

To return to normal playback mode, select

“Repeat off” in the step above.

15

Labelling a CD — Disc Memo

(For a CD unit with the custom file function)

You can label each disc with a personalised

name. You can enter up to eight characters for

a disc. If you label a CD, you can locate the

disc by name (page 16) and select the specific

tracks for playback (page 17).

1 Press (MENU), then press either side of

(DISC/PRST) repeatedly until ”Name

Edit” appears.

2 Press (ENTER).

Name edit mode

3 Enter the characters.

1 Press (+) side of (DISC/PRST)

repeatedly to select the desired

characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t <

t . t )

If you press (–) side of (DISC/PRST)

repeatedly, the characters will appear in

reverse order.

If you want to put a blank space

between characters, select “ ” (under-

bar).

2 Press (+) side of (SEEK/AMS) after

locating the desired character.

The next character flashes.

If you press (–) side of (SEEK/AMS), the

previous character flashes.

3 Repeat steps 1 and 2 to enter the

entire name.

4 To return to normal CD playback mode,

press (ENTER).

Tips

• To erase or correct a name, enter “

” (under-

bar) for each character.

• There is another way to start labelling a CD. Press

and hold (LIST) for two seconds instead of steps

1 and 2. You can also complete the operation by

pressing and holding (LIST) for two seconds

instead of step 4.

Displaying the disc memo

Press (DSPL/PTY) during CD or CD TEXT

disc playback.

Each time you press (DSPL/PTY) during CD

or CD TEXT disc playback, the item

changes as follows:

V

Disc number*

1

/Track number/

Elapsed playback time

V

Disc memo name

V

Track name*

2

V

FM1 frequency*

3

*

1

While an optional CD unit is connected.

*

2

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a

CD TEXT disc.

*

3

While the AF/TA function is activated.

16

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit)

You can use this function for discs that have

been assigned a custom name. For more

information on disc names, refer to “Labelling

a CD” (page 15).

1 Press (LIST).

The name assigned to the current disc

appears in the display.

When you assign a disc memo label to a CD

TEXT disc, it takes priority over the original

CD TEXT information.

2 Press either side of (DISC/PRST)

repeatedly until you find the desired

disc.

3 Press (ENTER) to play the disc.

Notes

• After a disc name has been displayed for five

seconds, the display returns to normal playback

mode. To turn off the display, press (LIST).

• The track names are not displayed during MD or

CD TEXT disc playback.

• If there are no discs in the magazine, “NO Disc”

appears in the display.

• If a disc has not been assigned a custom file,

“********” appears in the display.

• If the disc information has not been read by the

unit, “?” appears in the display. To load a disc,

first press the number button, then choose the

disc that has not been loaded.

• Some letters cannot be displayed (during MD or

CD TEXT disc playback).

Erasing the disc memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the CD

unit.

3 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “NameDel”

appears.

4 Press (ENTER).

5 Press either side of (DISC/PRST)

repeatedly to select the disc name you

want to erase.

6 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD playback

mode.

Notes

• When a personalised label is erased, the original

CD TEXT information will appear in the display.

• When you erase all of the disc names, “No Data”

appears in step 5.

SOURCE

To locate

preceding discs

To locate

succeeding discs

17

Selecting specific tracks

for playback — Bank

(For a CD unit with the custom file function)

If you label the disc, you can set the unit to

skip or play the tracks of your choice.

1 Start playing the disc you want to label.

2 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Bank sel”

appears.

3 Press (ENTER).

Bank edit mode

4 Label the tracks.

1 Press either side of (SEEK/AMS)

repeatedly to select the track you

want to label.

2 Press (ENTER) repeatedly to select

“Play” or “Skip.”

5 Repeat step 4 to set “Play” or “Skip” for

all the tracks.

6 Press (MENU) twice.

The unit returns to normal CD playback

mode.

Notes

• “NO Name” flashes for five seconds when an

unlabelled disc is selected in step 3.

• You can set “Play” and “Skip” for up to 24

tracks.

• You cannot set “Skip” for all the tracks on a CD.

Playing specific tracks only

You can select:

•“Bank on” – to playback the tracks with the

“Play” setting.

•“Bank inv” (Inverse) – to playback the tracks

with the “Skip” setting.

1 During playback, press (MENU), then

press either side of (DISC/PRST)

repeatedly until “Bank off” appears.

2 Press (+) side of (SEEK/AMS) repeatedly

until the desired setting appears.

B Bank on B Bank inv

Bank off b

Playback starts from the track following the

current one.

To return to normal playback mode, select

“Bank off” in step 2 above.

18

Memorising only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, FM2, and FM3), up to 6 MW stations,

and up to 6 LW stations in the order of your

choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press and hold the desired number

button ((1) to (6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

B Tuner B CD* B MD*

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3

LW b MW b

3 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “BTM”

appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a disc is not in the unit, only the tuner band

appears even if you press (SOURCE).

19

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (DISC/PRST) to receive the

stations in the order they are stored in the

memory (Preset Search Function).

If you cannot tune in a preset

station

Press either side of (SEEK/AMS) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (DISC/PRST)

repeatedly until “Local” (local seek mode) is

displayed. Then press (+) side of (SEEK/AMS) to

select “Local on.” Press (ENTER).

Only the stations with relatively strong signals will

be tuned in.

Tips

• When you select the “Local on” setting,

“LCL Seek” appears while the unit is searching

for a station.

• If you know the frequency of the station you

want to listen to, press and hold either side of

(SEEK/AMS) until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “Mono” appears.

2 Press (+) side of (SEEK/AMS) until

“Mono on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select

“Mono off” in step 2 above.

20

Frequencies change automatically.

Changing the displayed item

Each time you press (DSPL/PTY), the item

changes as follows:

Station Name (Frequency) y Programme type

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 37.)

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 18).

2 Press (AF) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF) repeatedly until “AF off” appears.

Station

98.5MHz

102.5MHz

96.0MHz

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: returning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 18).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Страница загружается...

Sony CDX-C8000RX, CDX-C8000R, MDX-C8500R Инструкция по применению

Похожие модели бренда

Модели других брендов