Sony CDX-M600R Руководство пользователя

Operating Instructions

Manual de instrucciones

Bruksanvisning

Manual de instruções

Инструкция по эксплуатации

GB

ES

PT

SE

For installation and connections, see the supplied installation/connections

manual.

Para obtener información sobre la instalación y las conexiones, consulte el manual

de instalación/conexiones suministrado.

Vi hänvisar till det medföljande häftet angående montering/anslutningar.

Para a instalação e as ligações, consulte o manual de instalação/ligações

fornecido.

Перед установкой и подсоединениями прочитайте прилагаемую

инструкцию по установке и подсоединению.

FM/MW/LW

Compact Disc

Player

CDX-M700R

CDX-M600R

3-047-694-12 (1)

RU

FM/MW/LW Compact Disc Player

CDX-M700R/CDX-M600R

2

Welcome !

Thank you for purchasing the Sony Compact

Disc Player. This unit lets you enjoy a variety

of features using the following controller

accessories:

Supplied accessory

Card remote commander

RM-X95 (for the CDX-M700R)

RM-X96 (for the CDX-M600R)

Optional accessory

Rotary commander RM-X4S

In addition to the CD playback and radio

operations, you can expand your system by

connecting optional CD/MD units*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you playback a CD TEXT disc*

2

.

*

1

You can connect CD changers, MD changers, CD

players, or MD players.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

This information is recorded on the disc.

Precautions

This label is located on the bottom of the

chassis.

This label is located on the drive unit’s internal

chassis.

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If your car is equipped with a power aerial, it

will extend automatically while the unit is

operating.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Moisture Condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the unit. Should this occur, the unit will not

operate properly. In such a case, remove the

disc and wait for about an hour until the

moisture has evaporated.

CLASS

PRODUCTLASER

1

CAUTION INVISIBLE

DO NOT STARE INTO BEAM OR

VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

LASER RADIATION WHEN OPEN

3

Notes on CDs

A dirty or defective disc may cause sound

dropouts while playing. To enjoy optimum

sound, handle the disc as follows.

Handle the disc by its edge. To keep the disc

clean, do not touch the surface.

Do not stick paper or tape on the disc.

Do not expose the discs to direct sunlight or

heat sources such as hot air-ducts, or leave

them in a car parked in direct sunlight where

there can be a considerable rise in temperature

inside the car.

Before playing, clean the discs with an optional

cleaning cloth. Wipe each disc from the centre

out.

Do not use solvents such as benzine, thinner,

commercially available cleaners, or antistatic

spray intended for analog discs.

Notes on discs

If you use the discs explained below, the sticky

residue can cause the CD to stop spinning and

may cause malfunction or ruin your discs.

Do not use second-hand or rental CDs that

have a sticky residue on the surface (for

example, from peeled-off stickers or from ink,

or glue leaking from under the stickers).

There are paste residue.

Ink is sticky.

Do not use rental CDs with old labels that are

beginning to peel off.

Stickers that are beginning

to peel away, leaving a

sticky residue.

Do not use your CDs with labels or stickers

attached.

Labels are attached.

When you play 8 cm CDs

Use the optional Sony compact disc single

adapter (CSA-8) to protect the CD player from

being damaged.

Notes on CD-R discs

•You can play CD-Rs (recordable CDs) on this

unit. However depending on the conditions

of the recording equipment or the CD-R disc

itself, some CD-Rs cannot be played on this

unit.

•You cannot play a CD-R that is not finalized

(Finalization is necessary for a recorded CD-

R disc to be played on the audio CD player).

•You cannot play CD-RWs (rewritable CDs)

on this player.

4

Table of Contents

Location of controls ................................................. 6

Getting Started

Resetting the unit ................................................ 8

Security release settings ..................................... 8

Turning the unit on/off ..................................... 8

How to use the menu ......................................... 9

Setting the clock .................................................. 9

CD Player

CD/MD Unit (optional)

Listening to a CD

(with this unit only) ..................................... 10

Playing tracks repeatedly

— Repeat Play .............................................. 12

Playing tracks in random order

— Shuffle Play .............................................. 12

Labelling a CD

— Disc Memo (For a CD unit with the

custom file function).................................... 13

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit) ....................... 14

Selecting specific tracks for playback

— Bank (For a CD unit with the custom file

function) ........................................................ 15

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) ................. 16

Memorising only the desired stations ............ 16

Receiving the memorised stations .................. 17

RDS

Overview of the RDS function ........................ 18

Displaying the station name ............................ 18

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 18

Listening to traffic announcements ................ 20

Presetting the RDS stations with the AF and

TA data .......................................................... 21

Locating a station by programme type .......... 22

Setting the clock automatically ....................... 23

DAB

Overview of DAB .............................................. 23

Basic operations of DAB .................................. 24

Presetting DAB services automatically

— BTM .......................................................... 25

Presetting DAB services manually

— Manual Preset Memory ......................... 25

Listening to a DAB programme ...................... 26

Settings on the audio reception ....................... 27

Locating a DAB service by programme type

(PTY) .............................................................. 27

DSP (CDX-M700R only)

Setting the equalizer ......................................... 28

Selecting the listening position ....................... 29

Selecting a soundstage menu

— Dynamic Soundstage Organizer

(DSO) ............................................................. 29

Adjusting the balance (BAL) ........................... 30

Adjusting the front and rear fader ................. 30

Adjusting the volume of the subwoofer(s).... 31

Listening to each programme source in its

registered DSO

— Source Sound Memory (SSM) ............... 31

Other Functions

Labelling the rotary commander .................... 32

Using the rotary commander .......................... 32

Adjusting the sound characteristics

(CDX-M600R only) ...................................... 34

Attenuating the sound ..................................... 34

Changing the sound and display settings ..... 35

Boosting the bass sound

— D-bass (CDX-M600R only) .................... 36

Selecting the spectrum analyser ..................... 36

Adjusting the sound and frequency of the

equalizer preamplifier

(CDX-M600R only) ...................................... 37

Additional Information

Maintenance ....................................................... 37

Dismounting the unit ....................................... 38

Specifications ..................................................... 40

Troubleshooting guide ..................................... 41

5

Location of controls

Card remote

commander

OFF

SEEK

PTY

SEEK

MENU LIST

SOUND

ENTER

DISC

SOURCE

DSPL AF/TA MODE

VOLATT

OPEN/CLOSE

DSO

Refer to the pages listed for details.

1 OFF button 8, 10

2 MENU button 9, 11, 12, 13, 14, 15, 16,

17, 19, 21, 23, 25, 27, 28, 30, 31, 35, 36

3 SOURCE (TUNER/CD/MD) button

8, 10, 11, 14, 16, 17, 24, 28, 29, 30, 31, 36

4 </, (SEEK/AMS –/+) buttons

9, 11, 12, 13, 15, 17, 19, 21, 23, 24, 25,

27, 28, 29, 30, 31, 34, 35, 36

Automatic Music Sensor (./>) 11

Manual Search (m/M) 11

Seek 17

5 SOUND button 28, 29, 30, 31, 34

6 DSPL/PTY (display mode change/

programme type) button

10, 11, 13, 22, 27

7 ATT (attenuate) button 34

8 CDX-M700R:

DSO (Dynamic Soundstage Organaizer)

button 29

CDX-M600R:

D-BASS button 36

9 OPEN/CLOSE button 10

q; LIST button 13, 14, 26

qa M/m (PRST/DISC +/–) buttons

9, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22,

23, 24, 25, 26, 27, 28, 30, 31, 35, 36

During CD/MD playback:

Disc change 11

During radio reception:

Preset stations select 17

qs ENTER button

9, 13, 14, 15, 16, 17, 19, 21, 22, 23, 25,

26, 27, 28, 30, 31, 35, 36

qd AF/TA button 18, 19, 20, 21

qf MODE button 10, 14, 16, 17, 24

During CD/MD playback:

CD/MD unit select 10, 14

During radio reception:

BAND select 16, 17

qg VOL (Volume adjust) buttons 20, 31

A unit turned off by pressing (OFF) for two

seconds cannot be operated with the card

remote commander unless (SOURCE) on the

unit is pressed or a CD is inserted to activate

the unit first.

6

Location of controls

SOURCE

123456

CLOSE

OFF

DISC

TAAF

DISC

DSO

ENTER

SOUND

MENU

LIST

REP SHUF

D

S

P

L

M

O

D

E

CDX-M700R/M600R

P

T

Y

Security side

Operation side

7

The corresponding buttons of the unit

control the same functions as those on the

card remote commander.

17 Reset button 8

2 Main display window

3 OPEN button 38

4qf Receptor for the card remote

commander

5 Volume adjust buttons

6

Z (eject) button

10

8 DSPL/PTY (display mode change/

programme type) button

9 Sub display window

q; MENU button

qa DISC/PRST +/– (cursor up/down) buttons

SEEK/AMS –/+ (cursor left/right) buttons

16

qs CDX-M700R:

DSO button

CDX-M600R:

D-BASS button

qd LIST button

qg OFF button*

qh MODE button

qj SOURCE (TUNER/CD/MD) button

qk AF button 18, 19, 21

ql Number buttons

During radio reception:

Preset number select

16, 17, 19, 21, 26

During CD/MD playback:

(1) REP 12

(2) SHUF 12

w; TA button 19, 20, 21

wa SOUND button

ws ENTER button

wd CLOSE button

* Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) only momentarily,

the clock display does not turn off and this

causes battery wear.

8

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert a CD in the unit. For

details on operation, refer to page 10 (CD/MD)

and page 16 (radio).

Turning off the unit

Press (OFF) to stop CD/MD playback or radio

MW/LW reception (the key illumination and

display remains on.)

Press (OFF) for two seconds to completely

turn off the unit.

Note

If your car has no ACC position on the ignition key

switch, be sure to turn the unit off by pressing

(OFF) for two seconds to avoid car battery wear.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Press the reset button with a pointed object,

such as a ballpoint pen.

Reset button

Note

Pressing the reset button will erase the clock

setting and some memorised functions.

Security release settings

Do the following initial settings before you

operate the unit for the first time, after

replacing the car battery, or after resetting the

unit.

Be sure to make these settings, otherwise the

front panel remains disabled and you will be

unable to operate the unit.

1 Press the reset button.

“Code in” appears.

2 Press the buttons on the card remote

commander, and send the security code.

Please refer to the supplied insert for details

on the security code buttons.

When the code has been confirmed, the

display changes to clock, and you can

operate the unit normally.

Notes

• When you leave the car, take the card remote

control with you.

• If you forget the security code, consult your Sony

Service Center. Be sure to bring the card remote

control with you.

9

SEEK SEEK

DISC

SOURCE

SEEK SEEK

DISC

SOURCE

M: to select upwards

m: to select downwards

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose M/m (up/down), or choose </,

(left/right).

M/m

</,

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press M or m

repeatedly until “Clock” appears.

1 Press (ENTER).

The hour indication flashes.

2 Press M or m to set the hour.

<:

to select

leftwards

,:

to select

rightwards

3 Press ,.

The minute indication flashes.

4 Press M or m to set the minute.

2 Press (ENTER).

The clock starts.

Tip

You can set the clock automatically with the RDS

feature (page 22).

Note

In the initial setting, the clock indication appears

while the unit is turned off.

When the D.Info mode is set to “on,” the time is

always displayed (except for some functions of SA

mode) (page 35).

10

CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit

alone, you can also control external CD/MD

units.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a CD

TEXT disc.

Listening to a CD

(with this unit only)

1 Press (OPEN/CLOSE) of the card remote

commander and insert the CD.

Playback starts automatically.

2 Press (OPEN/CLOSE) of the card remote

commander to close the front panel.

If a CD is already inserted, press (SOURCE)

repeatedly until “CD” appears to start

playback.

Note

To play back an 8 cm CD, use the optional Sony

compact disc single adapter (CSA-8).

Elapsed playing timeTrack number

When the last track on the CD is

over

The track number indication returns to “1,”

and playback restarts from the first track of the

CD.

To Press

Stop playback (OFF)

Eject the CD (OPEN/CLOSE) then Z

Playing a CD or MD

(with optional CD/MD unit)

1 Press (SOURCE) repeatedly to select

“CD“ or “MD.“

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

All the discs in the current CD/MD unit is

played from the top.

Changing the display item

Each time you press (DSPL/PTY) during CD,

CD TEXT disc, or MD playback, the item

changes as follows:

V

Disc number*

1

/Track number/

Elapsed playing time

V

Disc name*

2

/Artist name*

3

V

Track name*

4

V

FM1 frequency*

5

*

1

While an optional CD/MD unit is connected.

*

2

If you have not labelled the CD or CD TEXT disc

(“Labelling a CD” page 13), or if there is no disc

name prerecorded on the MD, “NO D.Name”

appear in the display.

*

3

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

*

4

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO T.Name” appear in the

display.

*

5

While the AF/TA function is activated.

Labelled side up

CD indication

11

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the items are

scrolled in the display one by one in order.

Note

If you use personalised labels, they will always

take priority over the original CD TEXT

information when such information is

displayed.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 35).

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

an MD or a CD TEXT disc exceeds 10

characters and the Auto Scroll function is on,

information automatically scrolls across the

display as follows:

• The disc name appears when the disc has

changed (if the disc name is selected as the

display item).

• The track name appears when the track has

changed (if the track name is selected as the

display item).

• The disc or track name appears depending on

the setting when you press (SOURCE) to select

an MD or CD TEXT disc.

If you press (DSPL/PTY) to change the display

item, the disc or track name of the CD TEXT

disc or MD is scrolled automatically whether

you set the function on or off.

1 During playback, press (MENU).

2 Press M or m repeatedly until “A.Scrl”

appears.

3 Press , to select “A.Scrl on.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.Scrl off” in

step 3.

Note

For some CD TEXT discs with very many characters,

the following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press < or ,

momentarily for each track you want to

skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold < or

,. Release when you have found the

desired point.

Note

If “

” or “ ” appears in the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Locating a disc

— Disc Selection

When an optional CD/MD unit is

connected, press M or m to select the

desired disc.

M (DISC +) : For succeeding discs

m (DISC –) : For preceding discs

The desired disc in the current optional

CD/MD unit begins playback.

, (>) :

To locate

succeeding

tracks

< (m) :

To search

backward

, (M) :

To search

forward

SEEK SEEK

DISC

SOURCE

< (.) :

To locate

preceding tracks

SEEK SEEK

DISC

SOURCE

SEEK SEEK

DISC

SOURCE

12

Playing tracks repeatedly

— Repeat Play

The CD in the main unit will automatically

repeat itself when it reaches the end. For repeat

play, you can select:

•Repeat 1 — to repeat a track.

•Repeat 2 — to repeat a disc in the optional

CD/MD unit.

1 During playback, press (MENU).

2 Press M or m repeatedly until “Repeat”

appears.

3 Press , repeatedly until the desired

setting appears in the display.

B Repeat 1 B Repeat 2*

Repeat off b

* “Repeat 2” is only available when you

connect one or more optional CD units, or

when you connect the optional MD units.

Repeat Play starts.

To return to normal play mode, select “Repeat

off” in step 3.

Tip

If you select the mode using the buttons on the

unit, press (1) (REP) repeatedly until the desired

mode appears.

Playing tracks in random

order — Shuffle Play

You can select:

•Shuf 1 — to play the tracks on the current

disc in random order.

•Shuf 2 — to play the tracks in the current

optional CD/MD unit in random order.

•Shuf All — to play all the tracks in all the

optional CD/MD units in random order.

1 During playback, press (MENU).

2 Press M or m repeatedly until “Shuf”

appears.

3 Press , repeatedly until the desired

setting appears in the display.

B Shuf 1 B Shuf 2* B Shuf All*

Shuf off b

* “Shuf 2” and “Shuf All” are only available

when you connect one or more optional CD

units, or when you connect the optional MD

units.

Shuffle Play starts.

To return to normal play mode, select “Shuf

off” in step 3.

Tip

If you select the mode using the buttons on the

unit, press (2) (SHUF) repeatedly until the desired

mode appears.

13

Labelling a CD — Disc Memo

(For a CD unit with the custom file function)

You can label each disc with a personalised

name. You can enter up to eight characters for

a disc. If you label a CD, you can locate the

disc by name (page 14) and select the specific

tracks for playback (page 15).

1 Start playing the disc you want to label.

2 Press (MENU), then press M or m

repeatedly until ”Name Edit” appears.

3 Press (ENTER).

Name edit mode

4 Enter the characters.

1 Press M repeatedly to select the

desired characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t <

t . t )

If you press m repeatedly, the characters

will appear in reverse order.

If you want to put a blank space

between characters, select “ .”

2 Press , after locating the desired

character.

The next character flashes.

If you press < , the previous character

flashes.

3 Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal CD play mode, press

(ENTER).

Tips

• To erase or correct a name, enter “

” (under-

bar) for each character.

• There is another way to start labelling a CD. Press

(LIST) for two seconds instead of steps 2 and 3.

You can also complete the operation by pressing

(LIST) for two seconds instead of step 5.

Displaying the disc memo

Press (DSPL/PTY) during CD or CD TEXT

disc playback.

Each time you press (DSPL/PTY) during CD

or CD TEXT disc playback, the item

changes as follows:

V

Disc number*

1

/Track number/

Elapsed playback time

V

Disc memo name

V

Track name*

2

V

FM1 frequency*

3

*

1

While an optional CD unit is connected.

*

2

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a

CD TEXT disc.

*

3

While the AF/TA function is activated.

14

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit)

You can use this function for discs that have

been assigned a custom name. For more

information on disc memo names, refer to

“Labelling a CD” (page 13).

1 Press (LIST).

The name assigned to the current disc

appears in the display.

When you assign a disc memo name to a

CD TEXT disc, it takes priority over the

original CD TEXT information.

2 Press M (DISC +) or m (DISC –) repeatedly

until you find the desired disc.

3 Press (ENTER) to play the disc.

Notes

• The track names are not displayed during CD

TEXT disc or MD playback.

• If there are no discs in the magazine, “NO Disc”

appears in the display.

• If a disc has not been assigned a custom file,

“********” appears in the display.

• Some letters cannot be displayed during CD TEXT

disc or MD playback.

Erasing the disc memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the CD

unit with the custom file function.

3 Press (MENU), then press M or m

repeatedly until “Name Del” appears.

4 Press (ENTER).

5 Press M or m repeatedly to select the disc

name you want to erase.

6 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Note

When a personalised label is erased, the original

CD TEXT information will appear in the display.

15

Playing specific tracks only

You can select:

•“Bank on” — to play the tracks with the

“Play” setting.

•“Bank inv” (Inverse) — to play the tracks

with the “Skip” setting.

1 During playback, press (MENU), then

press M or m repeatedly until “Bank”

appears.

2 Press , repeatedly until the desired

setting appears.

B Bank on B Bank inv

Bank off b

3 Press (ENTER).

Playback starts from the track following the

current one.

To return to normal play mode, select

“Bank off” in step 2.

Selecting specific tracks

for playback

— Bank

(For a CD unit with the custom file function)

If you label the disc, you can set the unit to

skip or play the tracks of your choice.

1 Start playing the disc you want to label.

2 Press (MENU), then press M or m

repeatedly until “Bank Sel” appears.

3 Press (ENTER).

Bank edit mode

4 Label the tracks.

1 Press < or , repeatedly to select the

track you want to label.

2 Press (ENTER) repeatedly to select

“Play.”

5 Repeat step 4 to set “Play” or “Skip” for

all the tracks.

6 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• You can set “Play” and “Skip” for up to 24

tracks.

• You cannot set “Skip” for all the tracks on a CD.

16

Memorising only the

desired stations

You can preset up to 18 FM stations (six each

for FM1, FM2, and FM3), up to 6 MW stations,

and up to 6 LW stations in the order of your

choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press . or > of the unit to tune in

the station that you want to store on the

number button.

4 Press the desired number button ((1) to

(6)) of the unit until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to six

stations on each band (FM1, FM2, FM3, MW,

and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

B Tuner B CD B MD*

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3

LW b MW b

3 Press (MENU), then press M or m

repeatedly until “BTM” appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

• If a CD is not in the unit, only the tuner band

appears even if you press (SOURCE).

17

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press M or m repeatedly until

“Mono” appears.

2 Press , until “Mono on“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select

“Mono off” in step 2.

Receiving the memorised

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press M (preset up) or m (preset down)

repeatedly to receive the stations in the

order they are stored in the memory.

Tip

If you select memorising the station using the

buttons of the unit, press the number button ((1)

to (6)) on which the desired station is stored.

If you cannot tune in a preset

station

Press < or , to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Press < or , repeatedly until the

desired station is received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press M or m repeatedly until

“Local” (local seek mode) is displayed. Then press

, to select “Local on.” Press (ENTER).

Only the stations with relatively strong signals will

be tuned in.

Tips

• When you select the “Local on” setting,

“LCL Seek” appears while the unit is searching

for a station.

• If you know the frequency of the station you

want to listen to, press and hold < or , until

the desired frequency appears (manual tuning).

18

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 16).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the motion display mode, all the items are

scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 35.)

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 16).

2 Press (AF/TA) repeatedly until “AF on”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Tip

If you select the mode using the buttons on the

unit, press (AF) until “AF on” appears.

Station

98.5MHz

102.5MHz

96.0MHz

Frequencies change automatically.

19

Listening to a regional programme

The “REG on” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG on,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (MENU),

then press M or m repeatedly until “REG”

appears.

2 Press , until “REG off” appears.

3 Press (ENTER).

Note that selecting “REG off” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG on” in

step 2.

Note

This function does not work in the United

Kingdom and in some other areas.

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button of the unit that

has a local station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Changing the display item

Each time you press (AF/TA), the item changes

as follows:

B AF on B TA on B AF TA on*

AF TA off b

* Select this to turn on both the AF and TA

functions.

Tips

• Each time you press (AF) on the unit, the item

changes as follows:

AF on y AF off

• Each time you press (TA) on the unit, the item

changes as follows:

TA on y TA off

Notes

• When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing

(AF/TA) repeatedly until “AF TA off” appears.

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Press

< or , while the station name is flashing

(within eight seconds). The unit starts searching

for another frequency with the same PI

(Programme Identification) data (“PI Seek”

appears and no sound is heard). If the unit

cannot find another frequency, “NO PI” appears,

and the unit returns to the previously selected

frequency.

20

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data lets you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (AF/TA) repeatedly until “TA on” or

“AF TA on” appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tips

• If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

• If you select the mode using the buttons on the

unit, press (TA) until “TA on” appears.

Note

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts it.

To cancel the current traffic

announcement

Press (AF/TA).

To cancel all traffic announcements, turn off

the function by pressing (AF/TA) until “AF

TA off” appears.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t miss

the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (AF/TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will be automatically switched to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Страница загружается...

Sony CDX-M600R, CDX-M700R Руководство пользователя

Похожие модели бренда

Модели других брендов