Telefunken TF-LED24S80T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED24S80T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

LCD TV with LED backlight

Телевизор цветного

изображения

жидкокристаллический (LCD)

TF-LED24S80T2

Instruction manual

Руководство по

эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Before you start

If you want to dispose of this product, do not mix it with general household waste. There

is a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Please unplug the power cord from the AC

outlet and contact a service center for repair

if following occurs: any obvious abnormality

appears in the unit, such as smoky, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit can be connected to a power

supply outlet without the third ground contact

as well as with a ground contact.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When unplugging the plug, always hold the

wide slot, do not touch the metal part, and do

not destroy, twist, pull or roast the power cord.

• Please contact the service center

immediately if you found that the core is

showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-press the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

the burning-light, direct sunlight, vibration,

high-temperature and humidity.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this

Before you start

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at least 10 cm

at above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the

LED TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you

move this product with the power cord or the

connection cable connected, damaged power

cord, connection cable or connection terminal

may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat exchange

in normal working mode, thus please do not

let children or anyone who is sensitive of

temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

WARNING

In order to avoid damage, make sure

to secure the unit on the wall

according to the wall mounting

instruction.

Wall or ceiling mounting implements

must be durable and sufficient enough to

support the weight of the unit.

Installation

Wall mounting

For wall mounting the back panel of this unit is

equipped with a VESA slot. A 75*75 mm VESA

wall-mount bracket should be used for wall

mounting. The wall-mounting bracket is not

included and should be acquired separately.

Manufacturer is not responsible for improper

mounting resulting in a damage to the unit.

Stand installation

Cover a flat stable surface with a soft cloth.

Place the TV unit face-down on the cloth.

Insert the support legs and fix them with

supplied screws as shown below.

Before you start

Connection

Outdoor antenna connection

Use 75 Ohm cable plug or 300-75 Ohm

impedance converter to plug in antenna input

terminal on the rear of the cabinet.

Other connections

• If the video source has a HDMI output

jack, you can connect the signal to the

monitor with the HDMI cable (not included).

•Optical output is intended for

transmitting multi-channel sound to an

external decoder (e.g. in 5.1-CH format).

Optical cable should be used for connection

(not included).

75 Ohm co-axis cable

TVRF antenna jack

Antenna cable connector

• Connect your headphones or earphones

(not included) to the headphone socket of

this unit. When earphones are connected, the

sound output through the built-in speakers of

this unit is mute.

• Plug the power cable in the electric outlet,

making sure the current voltage is supported.

• Connect the video source to the

AV input using a CVBS cable (not included).

• Connect the audio source to the

Left and Right stereo audio inputs.

•CI slot is used for CI (PCMCIA) modules

that are obtained from your digital TV provider.

Operation

Control elements

TV Status Pull Up / Down Pull Left / Right Press OK

Powered Off --- Press to power on

---

Press to confirm

Press and hold to go back

Outside OSD

menu Channel + / - Volume - / +

In OSD menu Move Up /

Down

Move Left /

Right

Press to open the setting menu

Press the rocker button to call the setting

menu, where you can enter main menu,

power off or select the source.

•Menu: press to display the main

OSD menu.

•Source: press to open the

signal source interface.

•Power: press to go to standby.

•Exit: exit the setting menu.

1. Remote control sensor

2. Rocker button

Back panel terminals

The terminals are (from left to right):

USB port, HDMI-2 (ARC) input, HDMI-1 (MHL) input, earphone socket,

composite AV input.

Back panel terminals (side)

The terminals are (from left to right):

TVRF antenna socket, CI (PCMCIA) slot, optical output.

Operation

Keys Function

Power( )

16:9

MUTE( )

Number keys(0~9)

List( )

SOURCE

Cursor keys

(, ,p,q)tu

VOL+/-

Return( )

EXIT

CH+/-

INFO

SUBTITLE

AUDIO

TTX

REC

T-Shift

REVEAL(EPG)

INDEX( )

ZOOM( )

HOLD( )

LANGUAGE( )

Red key

Green key

Yellow key

Blue key

Switch between working and

standby status.

Switch the display mode.

Turn on/off the sound.

Enter numbers or select channel.

View program list.

Return to last watching channel.

Select the signal source.

(only in TV mode)

Show the OSD menu.

Select items or adjust values.

Confirm the operation.

Turn up/down the volume.

Return to previous page.

Exit the current interface

Change program channel.

Show the information of the TV

program.

Select subtitle language.

Select audio language.

Turn on/off the associated audio.

Open teletext mode.

Record programme.

Time shift in DTV mode.

Displays the hidden text in

teletext mode.(Electronic channel

instructions.)

Displays the index page in

teletext mode.(Play/pause

function in multimedia)

Adjust the teletext size.

(Stop function in multimedia)

Hold the displays at the current

page.(Last file in multimedia).

Change teletext language.

(Next file in multimedia).

Special function key

Operation

General operations

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8

meters and within 30 degrees at the left or the

right side.

• Take the battery out of the RC if it is not

used for a long time.

• Do not mix new and used batteries or

different types of batteries. Weak batteries can

leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high

humidity.

CAUTION!

Incorrect installation of the batteries may

lead to an explosion.

Please replace used batteries with the

batteries of the same or comparable type.

Signal sources

Press SOURCE, then press DOWN/UP cursor

buttons on the RC or CH+/CH- buttons on the

panel to select a source from the list. Press OK

button on the RC or MENU button on the panel

to confirm. Press EXIT to exit.

Power

• Connect the plug of the power cord to the

mains socket and press the POWER

button to switch on the TV.

• Do not leave your TV in standby mode for

a long period of time; if you are not going to

use the unit, disconnect it from power supply.

• In TV mode the unit will automatically go to

standby mode if no signal for 5 minutes.

Operations

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly to

increase the volume.

• Press MUTE to mute sound, press this

button again or increase volume to resume

sound.

•Press button on the RC to select

from the present channel and the previously

displayed channel.

Teletext operations (option)

Select a TV channel in order to pick up the

picture signal of Teletext. Teletext button

functions are as follows:

TTX: Press this button to enter into TEXT

mode. Press the button again to return to the

channel you are watching.

HOLD: Press this button to stop the move

to the next page. Press this button again to

cancel operation.

INDEX: Press this button to go to the index

page.

REVEAL: Press this button to reveal the

concealed information. Press this button againco

to conceal the information.

Red/Green/Yellow/Blue buttons: Press

these 4 color buttons to access directly to

corresponding color page displayed at the

lower parts of teletext screen.

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons to go

to the needed setting page.

3. Press UP/DOWN cursor buttons to select

a parameter to adjust.

4. Press LEFT/RIGHT buttons to adjust the

selected parameter.

5. Press button to go back or EXIT to exit

the menu.

Some menu items may be in grey color,

in this case they are not adjustable. Pictures of

OSD menu are for reference only; they may

differ from the actual menu tabs.

Channel menu

•ATV Manual Tuning:

Current CH: select channel number.

Color System: select corresponding color

system.

Sound System: select corresponding sound

system.

Fine-Tune: perform fine adjustment of

the current frequency.

Search: press LEFT/RIGHT buttons;

the unit will search for next available

channel downward or upward and save it

under the current number.

•Programme Edit: this item allows

you to sort TV programs according to

your preferences. Enter the program edit

menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with

LCN): Highlight the needed channel. Press

yellow button; select the position to put the

channel into. Press yellow button to confirm.

Favorite: Select the channel you want to

edit. If this channel is your favorite channel,

you can add it to your favorite channel list by

pressing the green button.

Skip: Highlight the needed channel. Press

blue button; now this channel will be skipped

when you select previous/next channels.

Auto Tuning

DTV Manual Tuning

ATV Manual Tuning

Programme Edit

Hide encoded

Signal Information

Software Update

•Auto Tuning: press OK buttons to select

the country and tune type for channels to start

automatic search and saving of available ATV

channels. After the search is finished, the unit

will proceed to search DTV channels.

•DTV Manual Tuning: Press LEFT/RIGHT

cursor buttons to select channel number. Press

OK button to start searching. When the nearest

available channel is found, the search will

stop and the channel will be saved under the

selected number. Press MENU button to quit.

•Signal Information: View the information

on the current signal.

CHANNEL

•Software Update: update the TV

software using a USB drive (only for experts).

•Hide encoded: hides the encoded (paid)

channels.

Operation

Picture menu

Picture Mode

Color Temperature

Noise Reduction

•Picture Mode: Standard/Mild/Personal/

Dynamic. When Personal mode is selected,

you can adjust contrast, brightness, colour,

sharpness and tint (in NTSC) of the image.

•Color Temp: Standard/Cold/Warm.

•Noise Reduction: Dynamic noise

reduction effect for reducing the video noise

level. Select the Off/Low/Middle/High/Default

mode.

Sound menu

Sound Mode

Balance

Surround Sound

SPDIF Output

AD Switch

•Sound mode: Standard/Music/Movie/

Sports/Personal. When Personal mode is

selected, you can adjust treble and bass.

•Balance: adjust the balance between the

left and the right speaker.

•SPDIF Output: Select the digital

audio output mode: Auto/PCM/Off.

•Surround Sound: set the

surround sound effect on or off.

•AD Switch (in DTV mode): This is an

auxiliary audio function that provides an

additional audio track for visually challenged

persons. This function handles the Audio

Stream for the AD (Audio Description), when

it is sent along with the Main audio from

the broadcaster. Users can turn the Audio

Description On or Off and control the volume.

Time menu

TIME

PICTURE

SOUND

Clock

Off Time

On Time

Sleep Timer

Time Zone

Auto Sleep

Auto Sync

•Clock: set the system time if Auto

Sync is disabled.

•Off Time: set the time for the TV to switch

off.

•On Time: set the time, channel and

volume for the TV to switch on. The TV must

be in standby for the On-timer to work.

•Sleep Timer: select the period until

automatic switch-off of the unit.

•Time Zone: select your time zone.

•Auto Sync: if on, the time will

automatically sync with the DTV signal.

•Auto Sleep: select the period after

which the TV turns off automatically if no input

is given.

Operation

Lock menu

LOCK

Lock System

Set Password

Block Program

Parental Guidance

•Lock system: the feature can prevent

unauthorized operation of the TV set unless

entering a 4-digit password. When Lock

System is on and the system is locked, you

must input the system password at Auto

Tuning, Manual Tuning or Default.

Press the right number buttons for the

password. The default password is 0000 .

After a password correction has been

confirmed, please remember it for entering

into the LOCK menu, all functions can not be

activated until the correct password is

entered.

•Set Password: you can set your private

password. Press the number buttons on the

remote control to set the new password. When

the new password has been put in twice, the

setting is finished successfully. The TV will go

back to previous menu.

•Block Program (in TV/DTV mode): press

Green button to lock the available program you

want. Press Green button again to unlock it.

for viewing certain channels and programmes.

•Parental Guidance: adjust the rating rules

Option menu

OSD Language

Audio Language

Subtitle

Subtitle Language

Hearing Impaired

PVR File System

Recorded List

Software Update (USB)

Restore Default

Environment

•OSD Language: select the

language of the on-screen display (OSD).

• Audio Language: select the language

of audio (available for some DTV channels).

•Hearing Impared: When Hearing

Impaired is on, the screen will give some

information to people whose hearing is

impaired. When Off, the information will be

hidden.

•PVR File System (in DTV mode):

Select Disc: select the storage used for PVR.

Time Shift Size: select the time for Time

Shift.

Format: format the USB.

Speed Check: display the speed of the

storage.

•Recorded List: view the list of

recorded programs.

OPTION

•Subtitle/Subtitle Language: toggle

subtitles on or off and choose its language

(DTV).

•Software update (USB): update TV

software using a USB storage device.

• Restore Default: reset the

parameters to initial factory settings.

•Environment: select one of the

environment modes:

Store Mode: Demo mode - used by

stores to showcase the TV's capabilities.

ECO Mode: Low power consumption

mode.

Operation

Electronic Programme Guide

(in DTV mode)

Press the EPG button to display the

Programme Guide menu. This function gives

you the detailed information of the channel,

indicating the time of the program playing.

From the Programme Guide it is possible to

check the program information for the next

eight days (If the information is available from

the broadcaster). Press EXIT button to quit.

•Record: Press Red button to set the

parameters of recording, The unit is able to do

schedule recording when TV is turning on or in

standby mode. You can set up several

schedule recording. Different schedules should

not overlap. When recording starts in standby

mode, the front indicators will change color and

there will be no picture or sound from the unit.

You can press the POWER button to light up

the screen.

•Info: Press the INFO button to see

the detailed information of the current channel.

•Remind: If you find the desired program

which will be shown in the future. Press

the green button to book program.

Digital program recording

Insert a USB, the system will automatically

create a folder to store the files recorded.

Recording begins when REC button is

pressed, and it records all the time until STOP

button is pressed or the memory is full.

Please note the following about PVR:

•USB storage device must have the

capacity of at least 512 MB and support the

USB 2.0 standard. Some non-standard

storage devices may not be supported

• Try formatting the inserted storage device

when you have trouble recording.

• Do not disconnect the device while the

formatting is in progress. When you

format the device, all data on it is deleted.

It may be advisable to back up your files

before formatting.

• If the USB storage device has several

partitions, the PVR system can record the

data on any one of them.

TimeShift function

TimeShift is a feature enabling you to

record an on-air digital TV program. Press

the T-Shift button to activate TimeShift. The

program is being recorded. You can pause

and rewind. Press T-Shift again to resume

the program. Press STOP or EXIT to disable

TimeShift.

CI Information

(only in DTV mode): This function enables

you to watch some encrypted services (pay

services). Please insert a CI card into the

PCMCIA slot according to the arrow on the

CI card.

• The function can only be available

when CI card is present.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

• If there is no picture and/or sound with the

CI+ CAM module inserted, please contact the

customer support of the service provider.

Operation

USB operation

General information

• This unit supports playback of video files

with AVI, TS, MP4, MKV, MOV extension, with

video codecs H264, MPEG2/4 and audio

codecs AAC, DD(AC3).

The above list of extensions and codecs

is for information only and is not a guarantee

that all files having the above extensions and

codecs should be read by this unit.

USB file systems supported: FAT32.

2.0 USB version is supported. Maximum

capacity 1 TB. For correct and satisfactory

operation, licensed USB devices of well-

known brands should be used with this unit.

Avoid using USB devices of unknown brands.

Playback of photos and music of only JPEG

and MP3 format is supported. The output

capability of the USB port is 500 mA.

• Some AVI files cannot be played due to

their parameters and recording conditions.

Video files with AVI extension exceeding 2 GB

in size may be played partially.

According to the USB 1.1/2.0 Standard,

usage of a USB device with power current

consumption exceeding 500 mA is not

recommended without supplementary power

supply. Failure to use supplementary power for

connected USB drives with power consumption

exceeding this value as well as defective

USB drives may cause mechanical or thermal

changes of elements of this unit as well as

failure of internal elements of the USB port.

Such damages are not warrantee cases.

Warning: usage of external USB drives

containing BIN files in the root directory may

cause malfunction of the unit or damage to the

software.

Operations of file playback

• Insert a USB into the USB port. Select

USB source and press OK button. The screen

will show a USB playback window, in which

you can select Movie, Music, Photo and File

contents to play by pressing LEFT/RIGHT

cursor buttons and OK button.

• Press cursor buttons to select Return

option and press OK button on the RC if you

want to go back to the previous menu.

• In the content menu, press cursor buttons

to select folder, press OK button on the RC

to enter it, then press cursor buttons to select

the file you want to watch or to listen to. When

highlighting the file, the file information will

appear and picture will be previewed (not

available for music files). Press PLAY/PAUSE

button on the RC to play the selected file.

• While playback, press INFO button; the

bottom of the screen will show playback menu

in which you can select an operation by LEFT/

RIGHT cursor buttons on the RC or perform

this operation by pressing OK button on the

RC. Some of the operations are as follows:

Play or pause playback All files

Select previous file All files

Select next file All files

Stop plabyack and return to

previous menu

All files

Select repat playback mode All files

Play music in background

mode when photo or text

file is being browsed (you

should select music file first)

Photo

and

Text

Show playlist All files

Show file information All files

Rotate image clockwise Photo

Rotate image anti-clockwise Photo

General Information

Rewind Music/

Movie

Fast forward Music/

Movie

Mute the sound Music/

Movie

Select time to start playback

from

Music/

Movie

Fragment repeat playback.

Press OK to select initial

point, press OK to select

final point of the fregment

Movie

Slow playback Movie

Step playback Movie

Zoom in Movie/

Photo

Zoom out Movie/

Photo

• While playback, press button to pause

button to stop or resume playback. Press

playback.

• When you select a file to play, you can

delete the selected file by pressing Red button,

then OK on the RC.

• When playing music files you can press

/ buttons to fast reverse or forward. You can

press / buttons to select the desired files

manually in normal condition.

•When playing text files, you can press LEFT/

RIGHT buttons to page up or page down the file.

General Information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, color and

volume are all in the minimum value

or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, color and volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

The picture in

VGA mode is

abnormal

The PC settings may be improper. Check and set the resolution

parameters of your PC.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

No sound No audio signal or the signal cord is

improperly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of

diathermy equipment from a nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long distant stations result in an instead picture and give the

effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,

hills, aircraft, etc. is minimized by correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture

or make the picture roll.

General information

Accessories

1. LED TV

2. Remote controller

3. Battery

4. Stand

Specifications

Size (diagonal)

Response time

Resolution

Aspect ratio

View angle (Horizontal/Vertical)

Color system

Sound system

NICAM Stereo

Digital audio output (Optical)

AV in

USB port

HDMI

DVB-T/DVB-T2/DVB-C signal reception

PCMCIA slot (CI, CI+ support)

Russian and English OSD

Progressive scan

Digital comb filter

Number of channels

Electric shock protection class

Nominal voltage range:

Unit dimensions: with stand

without stand

Net weight

The LCD panel is a high technology product with many thin film transistors that can

give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen

as a fixed point of blue, green, red, black or white, please note that this does not affect the

performance of your LCD TV.

Warning: For the sake of improvement, unit specifications may be subject to change without

prior notice.

1 pc

2 pcs

1 pc

5. Screw

6. Instruction manual

DTV 400, ATV 199

~100–240 V; 50 Hz;

549 x 156 x 365 mm

549 x 67 x 327 mm

2.2 kg

23.6” (60 cm)

8.5 ms

1366 x 768

16:9

178°/178°

PAL, SECAM

B/G, DK, I

2 x 4 W

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить

настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте

руководство для использования в будущем.

Перед покупкой рекомендуется

провести проверку оборудования:

-на отсутствие механических

повреждений конструкции, внешнего

оформления и упаковки, на

функционирование, на сохранность

пломб, на соответствие комплекта

поставки данным раздела

"Комплектность". Проведение проверки

на функционирование является

обязанностью продавца;

-на наличие гарантийного талона

-на правильность простановки в

гарантийном талоне даты продажи и

штампа продавца.

Рекомендуется сохранять товарный

(кассовый) чек, руководство по

эксплуатации с гарантийным талоном

до конца гарантийного срока

эксплуатации.

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Пожалуйста, извлеките шнур пита-

ния из розетки и свяжитесь с сервисной

службой в следующих случаях: если в

устройстве имеются явные неисправности,

например, из него идет дым, чувствуется

специфический запах или слышен неха-

рактерный звук; если внутрь устройства

попала жидкость или посторонние предме-

ты; если нет изображения или звука; если

поврежден корпус или панель; если Вы

пользуетесь устройством согласно инструк-

ции, но оно не работает должным образом.

• Данное изделие может подключаться

к розетке питания как без заземляющего

третьего контакта, так и с заземляющим

третьим контактом.

• Во избежание поражения электриче-

ским током защищайте шнур питания от

возможного нажатия на него или защемле-

ния, особенно рядом с разъемами.

• Не закрепляйте шнур питания метизами.

• Если Вы не пользуетесь устройством

длительное время или в случае грозы

обязательно отключайте шнур питания из

розетки, а также отключайте все сигналь-

ные кабели от входных разъемов.

• При отключении вилки из розетки всег-

да держитесь за утолщение на вилке, не

касайтесь металлических частей, не тяните

за шнур и не ломайте и не перегибайте его,

не ремонтируйте, не перекручивайте и не

нагревайте.

• Немедленно свяжитесь с сервисным

центром, в случае если имеются какие-либо

неисправности шнура питания, в нем оголи-

лись жилы или он поврежден.

• Замените сетевую розетку, если в

нее невозможно вставить вилку или вилка

плохо закрепляется в розетке. Иначе могут

возникнуть неисправности или произойти

несчастные случаи или возгорания.

• Не прикасайтесь к проводам мокрыми

руками.

• Запрещается использование розетки, в

которую подключено несколько устройств.

Перегрузка такой розетки может привести

к пожару.

• Место подключения вилки шнура

питания к сети 220 В должно оставаться

легкодоступным.

• Перед работой с устройством необ-

ходимо полностью прочитать и понять все

инструкции. Необходимо соблюдать все пред-

упреждения и следовать всем инструкциям,

приведенным в настоящем руководстве.

• Пожалуйста, используйте только реко-

мендованные производителем аксессуары.

Перед началом эксплуатации

Использование других аксессуаров может

привести к неисправностям.

• Пожалуйста, проводите все настройки

и регулировки только с помощью кнопок

на передней и боковой панелях или на

пульте дистанционного управления. Ни в

коем случае не снимайте заднюю панель

и не пытайтесь самостоятельно проводить

техническое обслуживание устройства,

так как существует опасность поражения

электрическим током, а также возможно

возникновение неисправностей.

• Не устанавливайте устройство на

непрочные или неровные поверхности,

тележки, стойки, треноги, кронштейны

или столы. Устройство может упасть, в

результате чего могут возникнуть неисправ-

ности или произойти несчастные случаи.

Используйте только те приспособления,

которые рекомендованы производителем

или продавцом.

• Пожалуйста, устанавливайте устрой-

ство на горизонтальной поверхности в ме-

стах с хорошей вентиляцией. Не допускайте

воздействия на устройство вибрации, пря-

мого солнечного света, высокой температу-

ры, а также попадания пыли и влаги.

• Не ставьте на устройство вазы, сосуды

с жидкостью. Попадание жидкости внутрь

аппарата может привести к пожару или по-

ломке устройства.

• Не устанавливайте устройство в зоне

магнитных волн. Это может привести к по-

ломке устройства. В зоне электромагнитно-

го излучения может наблюдаться искаже-

ние изображения.

• Не устанавливайте вблизи устройства

источники открытого огня, например, свечи.

В случае их падения устройство может быть

повреждено или может произойти возгора-

ние.

• Установка телевизора в замкнутое

пространство при эксплуатации может со-

кратить срок службы устройства; поэтому

необходимо обеспечить минимальную

дистанцию между LED-телевизором и

внутренними границами приспособления

под аппарат для нормальной вентиляции

(минимум по 10 см свободного простран-

ства со всех сторон).

• Располагайте кабели позади устрой-

ства. Не закрепляйте их метизами, не пере-

гибайте, не ремонтируйте и не нагревайте.

• При перемещении телевизора не

нажимайте и не касайтесь панели. Не пере-

носите телевизор в положении, при котором

экран направлен вверх или вниз.

• Не перемещайте устройство при под-

ключенном проводе питания или других

подключенных проводах. Повреждение про-

вода питания, подключенный провод или

подключенные устройства могут стать при-

чиной пожара, электрошока или поломки.

• Если устройство тяжелее 18 кг, его

должны перемещать не менее 2 человек.

При падении устройство может повредиться.

• Слишком сильное нажатие на панель

может повредить устройство.

• При длительном использовании может

немного повысится температура корпуса

устройства. Это явление свидетельствует о

теплоотдаче в нормальном рабочем режи-

ме. Однако не позволяйте детям и людям с

повышенной температурной чувствительно-

стью касаться устройства.

После транспортировки в холодную

погоду (ниже 5° С) рекомендуется не

включать телевизор в течение как

минимум трех часов: за это время он

нагреется до комнатной температуры, а

весь конденсат испарится.

Все иллюстрации, приведенные в на-

стоящем руководстве, являются схе-

матическими изображениями, которые

могут отличаться от реальных объектов.

Перед началом эксплуатации

Установка/Подключение

Установка

Крепление на стену

Установка на подставку

Выберите ровную плоскую горизонталь-

ную поверхность, накройте ее мягкой тка-

нью и разместите на ней корпус телевизора

экраном вниз. Присоедините ножки-под-

ставки таким образом, чтобы отверстия в

подставках и в корпусе телевизора совпа-

дали. Зафиксируйте с помощью входящих

в комплект винтов.

Для крепления на стену на задней панели

телевизора имеются отверстия стандарта

VESA (расстояние между отверстиями: 75 х

75 мм). Используйте эти отверстия, что-бы

прикрепить панель телевизора к настен-

ному кронштейну (кронштейн в комплект

поставки не входит приобретается отдель-

но). Производитель не несет ответственно-

сти за неправильно выполненный монтаж,

повлекший повреждение телевизора.

ПРЕДУПРЕЖДЕНИЕ

Во избежание повреждений надежно

закрепите аппарат на стене в

соответствии с требованиями

инструкции по установке.

ВНИМАНИЕ - До включения аппаратуры

в электрическую сеть необходимо

ознакомиться с мерами электрической и

противопожарной безопасности,

приведенными в разделе "Меры

предосторожности" настоящего

Руководства по эксплуатации.

Страница загружается ...

Telefunken TF-LED24S80T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED24S80T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

Telefunken TF-LED24S80T2 Руководство пользователя

Telefunken TF-LED24S80T2 Руководство пользователя

Похожие модели бренда