Yamaha S90XS Инструкция по применению

S90 XS/S70 XS Remote Editor Owner’s Manual 1

S90 XS/S70 XS Remote Editor

Owner’s Manual

SOFTWARE LICENSE AGREEMENT

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY

PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN

YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION ("YAMAHA").

BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS

OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE.

IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the software program(s) and data ("SOFTWARE") accompanying this Agreement. The

term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s

licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data

created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.

• You may use the SOFTWARE on a single computer .

• You may make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where such

backup copy is permitted. On the backup copy, you must reproduce Yamaha's copyright notice and any other proprietary legends that were

on the original copy of the SOFTWARE.

• You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the recipient

reads and agrees to the terms of this Agreement.

2. RESTRICTIONS

• You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any

method whatsoever.

• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the

SOFTWARE.

• You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.

• You may not use the SOFTWARE to distribute illegal data or data that violates public policy.

• You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following

restrictions which you must observe.

• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.

• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in

public without permission of the copyright owner.

• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modiﬁed without

permission of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or

provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such

termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided

"AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY

DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.

SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE

SOFTWARE WILL BE CORRECTED.

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT

SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF

THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in

contract, tort or otherwise) exceed the amount paid for the SOFTWARE.

S90 XS/S70 XS Remote Editor

Owner’s Manual

Special Notices

S90 XS/S70 XS Remote Editor Owner’s Manual

6. THIRD PARTY SOFTWARE

Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data

accompanying the Software, Yamaha identiﬁes any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must

abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY

SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any

way for the THIRD PARTY SOFTWARE or your use thereof.

•Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, as to the THIRD PARTY SOFTWARE.

•Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.

•Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential

damages, expenses, lost proﬁts, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.

7. GENERAL

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conﬂict of laws. Any dispute

or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction ﬁnds any portion of this

Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written

materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this

Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of

Yamaha.

Special Notices

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except for

your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without

the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot

be held responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat

different from the screens which appear on your computer.

• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their

respective companies.

Contents

SOFTWARE LICENSE AGREEMENT.................................................1

Special Notices ...................................................................................2

What is the S90 XS/S70 XS Remote Editor? ....................................3

Data structure of the S90 XS/S70 XS Remote Editor ......................3

Operation ﬂow from starting the application to closing it..............4

S90 XS/S70 XS Remote Editor Windows ..........................................7

Troubleshooting................................................................................14

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,

please refer to the owner’s manual which came with your Windows/Macintosh software before using the S90 XS/S70

XS Remote Editor.

For information about hardware requirements, the interconnection of devices and the installation of the S90 XS/S70

XS Remote Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the

respective MIDI device.

What is the S90 XS/S70 XS Remote Editor?

S90 XS/S70 XS Remote Editor Owner’s Manual

What is the S90 XS/S70 XS Remote Editor?

S90 XS/S70 XS Remote Editor is a convenient tool which lets you edit/create Control Templates for the S90

XS/S70 XS Music Synthesizer. These Control Templates let you assign the appropriate functions for your

favorite VSTi to the Knobs and Sliders on the S90 XS/S70 XS. While the S90 XS/S70 XS handles up to 50

Control Templates (in a single Bank), the S90 XS/S70 XS Remote Editor can be used to create and organize

multiple Bank ﬁles, each of which contain 50 Control Templates. Data of a single Bank containing 50 Control

Templates created on the S90 XS/S70 XS Remote Editor can be transferred from the computer to the S90 XS/

S70 XS and saved to the computer as a single Bank ﬁle (.rse).

Data structure of the S90 XS/S70 XS Remote Editor

Within the S90 XS/S70 XS Remote Editor, you can select a Bank ﬁle then edit each one of the 50 Control

Template contained in the selected Bank. After ﬁnishing your edits of the selected Bank (called "Current

Bank"), save the Bank data to a ﬁle by using the "Save" or "Save As…" menu. The Bank data saved to the ﬁle

can be recalled when starting the S90 XS/S70 XS Remote Editor next time.

Refer to the illustration below to understand the data structure of the S90 XS/S70 XS Remote Editor.

File

(extension: .sre)

50 Control Templates

Open

(1 Bank)

50 Control Templates in a

ﬁle are called up the Library

window.

Edit window

Library window

S90 XS/S70 XS Instrument

Data of the 50 Control Templates (1 Bank) is

automatically transferred as soon as the S90

XS/S70 XS Remote Editor is started.*

When a File is opened, data of the 50 Control

Templates (1 Bank) in the ﬁle is automatically

transferred to the S90 XS/S70 XS Instrument.*

After a Control Template is imported from the ﬁle,

click the [OK] button to transfer the current Bank

to the S90 XS/S70 XS Instrument.*

*This is available only when the S90 XS/S70 XS and the

S90 XS/S70 XS Remote Editor (computer) are connected

properly via USB, and are in the ONLINE status.

When you properly connect the computer and S90 XS/

S70 XS by USB while using the S90 XS/S70 XS Remote

Editor, the status will change to ONLINE and the settings

of the current Bank on the S90 XS/S70 XS Remote Editor

will be transferred to the S90 XS/S70 XS automatically.

Save

Save As

(1 Bank)

Operation flow from starting the application to closing it

S90 XS/S70 XS Remote Editor Owner’s Manual

Operation ﬂow from starting the application to

closing it

The S90 XS/S70 XS Remote Editor is a software contained in the S90 XS/S70 XS Remote Tools. After

installing the S90 XS/S70 XS Remote Editor and related applications by following the Installation Guide of the

S90 XS/S70 XS Remote Tools, follow the instructions below. Before starting, make sure that the S90 XS/S70

XS is properly connected to the computer via a USB cable. There is no single way to use the many

components in the S90 XS/S70 XS Remote Editor. Your editing needs and preferences may differ; however,

the following example gives you a simple step-by-step guide in how to use the S90 XS/S70 XS Remote

Editor.

n After completing installation of the S90 XS/S70 XS Remote Editor, start the DAW software once then quit it. This operation

is necessary to scan through the DAW software for obtaining the VSTi-related information. Only DAW software produced

by Steinberg (such as Cubase) can be scanned.

1. Start the S90 XS/S70 XS Remote Editor by selecting [Start] → All Programs →

[Yamaha S90 XS _ S70 XS Remote Editor] → [Yamaha S90 XS _ S70 XS Remote

Editor].

The Auto Sync window appears and the settings of the 50 Control Templates on the S90 XS/S70 XS are

transferred automatically to the Current Bank (page 10) of the S90 XS/S70 XS Remote Editor.

After transfer has been successfully completed, the Edit window appears.

n If data transfer in the Auto Sync window fails even when the S90 XS/S70 XS and computer are connected

properly, make sure to set the MIDI In/Out parameter to "USB" and the Device Number parameter to "1" or

"All" in the Utility MIDI display on the S90 XS/S70 XS.

Operation flow from starting the application to closing it

S90 XS/S70 XS Remote Editor Owner’s Manual

2. Select "Setup" from the [File] menu to call up the Setup window.

3. Conﬁrm that the MIDI Port is set to "Yamaha S90 XS (Yamaha S70 XS)," then select the

desired DAW software from the DAW Select column.

If the S90 XS/S70 XS and the S90 XS/S70 XS Remote Editor are connected properly via USB, you can

conﬁrm that the MIDI Port is set to "Yamaha S90 XS (Yamaha S70 XS)" when the above window appears.

The DAW selection is necessary for performing the Scan operation ("VSTi Database" menu in the [File]

menu) and obtaining the VSTi-related information.

4. Click [OK] to start the Scan operation.

The VSTi plug-ins registered to the speciﬁed DAW software will be scanned and the information

necessary for editing will be obtained.

After the scanning is completed, the previous display will appear. The setup of the S90 XS/S70 XS

Remote Editor is ﬁnished.

n If the VSTi scanning is not performed when you click [OK] in step 4, select [File] → [VSTi Database] → [Full

Scan] to execute scanning.

5. Start the DAW software (for example, Cubase).

6. Press the [DAW REMOTE] button on the S90 XS/S70 XS instrument to enter the Remote

mode.

7. Select the Control Template, then edit the selected Control Template on the Edit window.

Perform the editing referring to the "S90 XS/S70 XS Remote Editor Window (page 7)" and "Menu

(page 11)." When the ONLINE status is turned on (when the S90 XS/S70 XS and the S90 XS/S70 XS

Remote Editor are connected properly via USB), setting the parameters on the S90 XS/S70 XS Remote

Editor affects the settings of the same parameters on the S90 XS/S70 XS in real time. This gives you a

convenient and useful way to edit while actually controlling the VSTi.

Operation flow from starting the application to closing it

S90 XS/S70 XS Remote Editor Owner’s Manual

8. After your editing session is ﬁnished, select [File] → [Save] (or [Save As...]) to save the

bank to a ﬁle.

9. Click "X" at the top left corner to quit the S90 XS/S70 XS Remote Editor.

If the edited Bank data has not been saved yet, messages appear prompting you to save it. Save a Bank

ﬁle to quit the S90 XS/S70 XS Remote Editor.

S90 XS/S70 XS Remote Editor Windows: Edit window

S90 XS/S70 XS Remote Editor Owner’s Manual

S90 XS/S70 XS Remote Editor Windows

The S90 XS/S70 XS Remote Editor consists of two windows: Edit and Library. The Edit window lets you edit

the settings of the selected Control Template while the Library window lets you import or copy Control

Templates.

Edit window

1 Always on Top button

Turning this button ( ) on keeps the S90 XS/S70 XS Remote Editor's window always on top.

2 ONLINE indicator

Shows whether the S90 XS/S70 XS Remote Editor and the S90 XS/S70 XS are properly connected via

USB (ONLINE status). In the ONLINE status, this indicator lights in green and any operations on the S90

XS/S70 XS Remote Editor automatically change the parameter value on the S90 XS/S70 XS.

3 Library button

Calls up the Library window (page 10).

4 [Store] button

Displays the Store window to save the edited Control Template to a desired destination in the current

Bank. Edited data will be transmitted to the S90 XS/S70 XS instrument when the edited Control Template

is saved.

5 File Name

Displays the ﬁle name including the current edited Template.

6 [T] / [F] mark

Shows the Editing status of the Control Template or Bank. The [T] mark indicates that the current Control

Template has been modiﬁed but not yet stored. This indicator disappears if you click the 4 [Store]

button and then execute the Template Save operation. The [F] mark is also used to indicate that the

current Bank has been modiﬁed but not yet saved to a File. This indicator disappears if you execute the

File Save operation.

461

)

-2

9-1

9-3

)-1

)-2

S90 XS/S70 XS Remote Editor Windows: Edit window

S90 XS/S70 XS Remote Editor Owner’s Manual

7 Control Template Selection box

Shows the currently selected Control Template. You can select the previous/next template by clicking the

scroll button at the right of this box, or select any template in the current bank by clicking the triangular

button.

8 Instrument Select box

Shows the VSTi name which is controlled by the Knobs and Sliders. You can change the VSTi by clicking

the triangular button then selecting the desired one. You can also input the VSTi name directly in this box

manually. Make sure to input the VSTi name correctly.

n If the desired VSTi is not shown even when you click the triangular button, refer to the Troubleshooting

section on page 14.

9 Edit section

The Knobs and Sliders illustrated here correspond to the Knobs and Sliders on the top panel of the S90

XS/S70 XS. Here, you can assign the desired function to each of the Knobs and Sliders.

9-1 Remote/CC buttons

When Remote is selected, using the Knobs and Sliders generates the Remote Control messages

exclusive for Cubase. When CC is selected, using the Knobs and Sliders generates MIDI Control

Change messages.

9-2 Function Assignment boxes

The Knobs and Sliders illustrated here are equivalent to the Knobs and Sliders on the S90 XS/S70

XS. Each of the boxes at the right side of the Knob and Slider shows the function assigned to the

corresponding Knob and Slider. (The function shown here differs depending on the Remote/CC

button status.) You can change the function assigned to each of the Knobs and Sliders by clicking

a desired box, then selecting the desired function in the ) Controller Setting section. In the

ONLINE status, setting this parameter changes the settings of the S90 XS/S70 XS in real time.

9-3 [Reverse] button

Reverses the direction of the Slider operation, determining whether moving the Slider up or down

increases or decreases the value. For example, when a parameter which is increased by moving

the Slider up is assigned to a Slider and this button is turned on, moving the Slider up decreases

the parameter value. Clicking the button once again restores the original state.

) Controller Setting section

Determines the function of the Knobs and Sliders corresponding to the column selected in the 9 Edit

section. There are two sections here: Remote section and CC (Control Change) section.

)-1 Remote section

Assigns the function to the Function Assignment box selected in the 9 Edit section. The setting

here is available when the Remote/CC button is set to "Remote." Clicking "Remote" at the left of this

section also sets the Remote/CC button of the Edit section to "Remote.

• Control Parameter

Click the triangular button to call up the menu, then select the desired function.

n The "QuickCtrl1" – "QuickCtrl8" parameters only apply to Cubase 4.1 or later.

S90 XS/S70 XS Remote Editor Windows: Edit window

S90 XS/S70 XS Remote Editor Owner’s Manual

)-2 CC (Control Change) section

Assigns the function to the Function Assignment box selected in the 9 Edit section. The setting

here is available when the Remote/CC button is set to "CC." Clicking "CC" at the left of this section

also sets the Remote/CC button of the Edit section to "CC."

• CC Number (Control Change Number)

Determines the Control Change number. Selects the Control Change number by clicking one of

the scroll buttons at the right of this box. You can also input the Control Change number directly.

• Display Name

Selects the Knob/Slider’s function name which is to be shown on the display of the S90 XS/S70 XS

when the Remote/CC button of 9 Edit section is set to "CC." Click the triangular button at the right

of this box, then select the desired one. You can also input the name directly.

• Display Format

Sets the value format shown on the display of the S90 XS/S70 XS to "0 – 127" or "-64 – +63."

! Detail button

Clicking this button closes the Controller Settings section. Click this again to open the Controller Settings

section.

When closing the Controller Settings section

S90 XS/S70 XS Remote Editor Windows: Library window

S90 XS/S70 XS Remote Editor Owner’s Manual

Library window

Clicking the Library button on the Edit window opens the Library window.

1 Control Template List in the File

Displays a list of the Control Templates saved in the File. Select a target Control Template in this list and

a destination location in the 2 Control Template List of the Current Bank, then click the 4 [Import] button

to execute the Import operation. You can view the contents of the selected Control Template in the

7 Preview section.

2 Control Template List of the Current Bank

Displays a list of the Control Templates on the Current Bank. Select a desired Control Template in this list,

then click the [OK] button to return to the Edit window. You can view the contents of the selected Control

Template in the 7 Preview section. You can also copy or paste a Control Template in this list.

3 File section

Clicking the icon in this section will call up the File Select dialog. In this dialog, select the ﬁle (saved

previously), then execute the File Select operation so that the Templates in the ﬁle are listed. In addition,

the name of the selected ﬁle appears in the window at the left of the icon.

4 [Import] button

Click this button to import the speciﬁc Control Template in the selected ﬁle to the Current Bank.

n The Import operation can be applied to just one Template at a time. You can import all Templates in the

selected ﬁle at the same time by operating [File] → [Open] in the Edit window.

5 [OK] button

Click this button to ﬁx the Current Bank and call up the Edit window. If the status is ONLINE, the selected

bank is also transferred to the S90 XS/S70 XS.

6 [Cancel] button

Click this button to cancel editing for the Current Bank and call up the Edit window.

7 Preview

Shows the settings of the Control Template selected in the Control Template List.

S90 XS/S70 XS Remote Editor Windows: [File] menu

S90 XS/S70 XS Remote Editor Owner’s Manual

[File] menu

New

Creates and opens a new Bank ﬁle containing the default setup. This menu is available when the Edit

window is shown.

Open

Opens a Bank saved in the File. This menu is available when the Edit window is shown.

Save

Saves the current settings of the Current Bank by overwriting the File you called up when starting your

editing session. This menu is available when the Edit window is shown.

Save As

This lets you rename the File and save the current settings of the current Bank. This menu is available when

the Edit window is shown.

Import Template

Imports data of a single Bank including the 50 Control Templates from a ﬁle (extension: .sre or .xml) to the

Control Template List in the File in the Library window. Selecting this menu performs the same action as

clicking the icon (

) in the File section in the Library window. This menu is available when the Library

window is shown.

S90 XS/S70 XS Remote Editor Windows: [File] menu

S90 XS/S70 XS Remote Editor Owner’s Manual

Setup

Selects the MIDI port of the S90 XS/S70 XS and the DAW software. Selecting this menu calls up the

following window. Set the parameters as necessary, then click [OK].

• MIDI Port

"Yamaha S90 XS (Yamaha S70 XS)" is automatically selected when the S90 XS/S70 XS and the

computer are connected properly via USB.

•DAW Select

Specify the DAW software you are currently using here.

VSTi Database

Scans through the DAW software you are using and obtains the VSTi-related information necessary for

editing. This menu consists of the following two menus.

Selecting "Full Scan" scans the entire DAW software. When you scan the DAW for the ﬁrst time, select

"Full Scan."

Selecting "Update" scans only the sections that have been updated since previous scanning. When

you've installed a new VSTi, select "Update."

The "Full Scan" is automatically executed when you start the S90 XS/S70 XS Remote Editor the ﬁrst

time or you change the DAW Select settings in the Setup window.

S90 XS/S70 XS Remote Editor Windows: [Edit] menu

S90 XS/S70 XS Remote Editor Owner’s Manual

[Edit] menu

Copy

Copies the selected data to the clipboard.

Paste

Pastes the data on the clipboard to the speciﬁed location.

Initialize Template

Resets all settings of the selected Template in the Current Bank to the initial default values.

Restore Hardware Backup Data

Restores all settings of all the Control Templates in the Current Bank and the S90 XS/S70 XS instrument to

the previous settings, before the S90 XS/S70 XS Remote Editor was opened. This menu is available when

the Library window is shown.

Reset to Factory Settings

Restores all settings of all the Control Templates in the Current Bank and the S90 XS/S70 XS instrument to

the Factory default settings. This menu is available when the Library window is shown.

[Help] menu

Manual

Selecting this menu calls up this manual in PDF format.

About

Selecting this menu calls up information on the S90 XS/S70 XS Remote Editor, including the version number.

Troubleshooting

S90 XS/S70 XS Remote Editor Owner’s Manual

Troubleshooting

Even when I click the triangular button at the right of VSTi Select/Input box in the Edit

window, the VSTi plug-ins registered to the DAW software are not shown as

expected.

• The S90 XS/S70 XS Remote Editor may not properly recognize the VSTi registered in the DAW

software. Select [File] → [VSTi Database] → [Full Scan] to search the VSTi information (page 12).

The parameters set on the S90 XS/S70 XS Remote Editor are not displayed on the

S90 XS/S70 XS.

• The display on the S90 XS/S70 XS is based on the information sent from Cubase (see the

illustration above). Start Cubase and select the corresponding VSTi within Cubase.

Even when I change the VSTi on the DAW software such as Cubase, the Control

Template on the S90 XS/S70 XS does not change corresponding to the newly

selected VSTi.

• The VSTi-related information is obtained through the Extension software (see the illustration

below). Make sure that the latest S90 XS/S70 XS Extension is installed.

• Make sure that the VSTi name displayed on the DAW software is the same as the one shown in

the VSTi Select/Input box (page 8).

Data transfer between the S90 XS/S70 XS Remote Editor, S90 XS/S70 XS and DAW software:

Turning the Knobs/Sliders on the S90 XS/S70 XS affects Remote parameters other

than those intended for control.

• In Cubase, remove the checkmarks of "ALL MIDI Inputs" corresponding to MIDI Ports 2 and 5 for

the S90 XS/S70 XS instrument.

Even when I click the triangular button at the right of Control Parameter in the Edit

window, the appropriate Control Parameters are not shown.

• Make sure that the VSTi is correctly selected in the VSTi Select/Input box (page 8). If you have

input the VSTi name directly, make sure that the spelling is correct and the placement of spaces

(if any) is correct. We recommend that you select the VSTi by clicking the triangular button at the

right of VSTi Select/Input box, instead of inputting the VSTi name directly.

DAW software (Cubase, etc.)

Note On/Off, Control Change

VSTi

S90 XS/S70 XS

Extension

Computer

S90 XS/S70 XS

Remote Editor

Remote Control

VSTi parameters (name, value)

S90 XS/S70 XS parameters

S90 XS/S70 XS

instrument

Port 1

Port 2

Port 5

Troubleshooting

S90 XS/S70 XS Remote Editor Owner’s Manual

On the DAW software other than Cubase, the set parameters are not controlled.

• The Remote control functions are available only for Cubase. Set the Remote/CC buttons (page 8)

to "CC."

• Make sure to select a parameter except to "Cubase" on the Daw Select display of the Utility mode

in the S90 XS/S70 XS instrument.

Even when I select another track on the DAW software, the VSTi to be controlled does

not change; instead, the VSTi which is assigned to the previously selected track

remains under control.

• On the DAW's Preferences dialog, select [Editing]-[Project & Mixer], then checkmark both "Sync

Project and Mixer Selection" and "Enable Record on Selected Track."

• When using Cubase, select "Yamaha S90 XS/S70 XS" in the Remote Device Setup window, then

select Port 2 for the S90 XS/S70 XS as the MIDI Input/Output.

• Make sure to set the S90 XS/S70 XS instrument to the Remote mode.

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

906MW-A0

Yamaha S90XS, S70, S70 XS REMOTE EDITOR, S90, S90 XS REMOTE EDITOR Инструкция по применению

Похожие модели бренда