Yamaha S70XS Инструкция по применению

S90 XS/S70 XS Remote Tools Installation Guide 1

ATTENTION

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY

PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS

BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).

BY Downloading, installing, copying, or otherwise using this software YOU ARE AGREEING to BE BOUND BY THE TERMS OF THIS LICENSE.

If you do not agree with the terms, do not download, install, copy, or otherwise use this software. if you have downloaded or installed THE

SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The

term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s

licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data

created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.

• You may use the SOFTWARE on a single computer.

• You m ay make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where

such backup copy is permitted. On the backup copy, you must reproduce Yamaha’s copyright notice and any other proprietary legends

that were on the original copy of the SOFTWARE.

• You m ay permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the

recipient reads and agrees to the terms of this Agreement.

2. RESTRICTIONS

• You m ay n o t engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE

by any method whatsoever.

• You m ay n o t reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the

SOFTWARE.

• You m ay n o t electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other

computers.

• You m ay n o t use the SOFTWARE to distribute illegal data or data that violates public policy.

• You m ay n o t initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following

restrictions which you must observe.

• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.

• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners

in public without permission of the copyright owner.

• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified

without permission of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or

provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such

termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided

“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY

DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.

SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE

SOFTWARE WILL BE CORRECTED.

SOFTWARE LICENSE AGREEMENT

S90 XS/S70 XS Remote Tools

Installation Guide

S90 XS/S70 XS Remote Tools

Installation Guide

S90 XS/S70 XS Remote Tools Installation Guide 2

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT

SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF

THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in

contract, tort or otherwise) exceed the amount paid for the SOFTWARE.

6. THIRD PARTY SOFTWARE

Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data

accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must

abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY

SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any

way for the THIRD PARTY SOFTWARE or your use thereof.

• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL

IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.

• Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.

• Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or

consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD

PARTY SOFTWARE.

7. G E N E R A L

This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute

or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this

Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written

materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this

Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of

Yamaha.

• The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.

• Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for

the results of the use of this Installation Guide and the software.

• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following

website.

http://www.yamahasynth.com/download/

• The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the

screens which appear on your computer.

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for

your personal use.

• Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.

Special Notices

S90 XS/S70 XS Remote Tools Installation Guide 3

S90 XS/S70 XS Remote Tools consists of two software components: S90 XS/S70 XS Remote Editor and S90 XS/S70

XS Extension. S90 XS/S70 XS Remote Editor is software which lets you edit/create Control Templates for the S90

XS/S70 XS Music Synthesizer. S90 XS/S70 XS Extension is software component that enables you to use the S90 XS/

S70 XS along with Cubase 4.5, Cubase Studio 4.5, Cubase Essential 4.5 or Cubase AI 4.5. The S90 XS/S70 XS

Remote Tools Installer installs these two software components.

Windows

 S90 XS/S70 XS Remote Editor

Windows XP

Windows Vista

 S90 XS/S70 XS Extension

The system requirements of S90 XS/S70 XS Extension are the same as Cubase / Cubase Studio / Cubase Essential

/ Cubase AI version 4.5.2 or later.

Macintosh

 S90 XS/S70 XS Remote Editor

 S90 XS/S70 XS Extension

The system requirements of S90 XS/S70 XS Extension are the same as Cubase / Cubase Studio / Cubase Essential

/ Cubase AI version 4.5.2 or later.

About S90 XS/S70 XS Remote Tools

Minimum System Requirements

OS:

Windows XP Professional SP3 or later/Home Edition SP3 or later

CPU:

1GHz or higher; Intel Pentium/Celeron/Core processor

Available Memory:

256MB or more

Hard Disk:

50MB or more

Other:

USB 1.1 or USB 2.0 interface

OS:

Windows Vista SP1 or later

CPU:

(32-bit OS) 1GHz or higher, Intel Pentium/Celeron/Core processor

(64-bit OS) Intel 64 compatible, Intel Pentium/Celeron/Core processor

Available Memory:

512MB or more

Hard Disk:

50MB or more

Other:

USB 1.1 or USB 2.0 interface

OS:

Mac OS X 10.4 or later

CPU:

G4 450 MHz or higher/Intel CPU

Available Memory:

256MB or more

Hard Disk:

50MB or more

Other:

USB 1.1 or USB 2.0 interface

NOTE

Keep in mind that the software is often updated and the system requirements are subject to change. You can check

the latest version information of each program and its system requirements at the following website:

http://www.yamahasynth.com/

The system requirements may differ slightly depending on the particular computer.

S90 XS/S70 XS Remote Tools Installation Guide 4

To use the S90 XS/S70 XS Remote Tools, you will need to install additional applications, as described below.

1 Install a DAW software, such as Cubase.

2 Install an appropriate USB-MIDI Driver.

Download the latest driver from our website:

http://www.global.yamaha.com/download/usb_midi/

3 Install the S90 XS/S70 XS Remote Tools.

Refer to “Installing the S90 XS/S70 XS Remote Tools.”

Follow the instructions below to install the S90 XS/S70 XS Remote Tools programs.

Windows

1 After the downloaded compressed file is properly extracted, double-click the “setup.exe” file.

The S90 XS/S70 XS Remote Tools setup dialog appears.

2 Follow the on-screen instructions to install the software.

When the S90 XS/S70 XS Remote Tools and the other necessary software is installed, you can start the S90 XS/

S70 XS Remote Editor.

3 Start a Steinberg-made DAW software (such as Cubase), then quit it.

This operation is necessary to scan through the DAW software so that the S90 XS/S70 XS Remote Editor obtains

the VSTi related information.

Macintosh

1 After the downloaded compressed file is properly extracted, double-click the “Install S90 XS _

S70 XS Remote Tools.pkg” file.

The S90 XS/S70 XS Remote Tools setup dialog appears.

2 Follow the on-screen instructions to install the software.

When the S90 XS/S70 XS Remote Tools and the other necessary software is installed, you can start the S90 XS/

S70 XS Remote Editor.

3 Start a Steinberg-made DAW software (such as Cubase), then quit it.

This operation is necessary to scan through the DAW software so that the S90 XS/S70 XS Remote Editor obtains

the VSTi related information.

Software Installation

Installing the S90 XS/S70 XS Remote Tools

NOTE

When using Windows Vista, if the “User Account Control” window appears, click [Continue].

NOTE

Only DAW software produced by Steinberg (such as Cubase 4.5 compatible with S90 XS/S70 XS Remote

Tools

) can be scanned for obtaining the VSTi-related information.

NOTE

Only DAW software produced by Steinberg (such as Cubase 4.5 compatible with S90 XS/S70 XS Remote

Tools

) can be scanned for obtaining the VSTi-related information.

S90 XS/S70 XS Remote Tools Installation Guide 5

When using Windows XP

1 From the Start menu, select ([Settings] ) [Control Panel]  [Add or Remove Programs] to

display the “Add or Remove Programs” panel.

2 Click “Change or Remove Programs” located in the upper left, then select “Yamaha S90 XS /

S70 XS Remote Tools” from the list in the right pane.

3 Click [Change/Remove].

A dialog box appears. Follow the instructions to remove the software.

When using Windows Vista

1 From the Start menu, select ([Settings] ) [Control Panel]  [Programs and Features] to display

the “Uninstall or change a program” window.

2 Select “Yamaha S90 XS / S70 XS Remote Tools” from the list.

3 Click [Uninstall/Change].

If the “User Account Control” window appears, click [Continue].

A dialog box appears. Follow the instructions to remove the software.

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

905MW-A0

Windows Software Uninstall

(removing the Installed application)

Yamaha S70XS, S70, S90 Инструкция по применению

Похожие модели бренда