Accessory CD-ROM for Windows Installation Guide 1
Accessory CD-ROM for Windows
Installation Guide/Installationshandbuch/Manuel d’installation/Guía de instalación
SPECIAL NOTICES
• The software and this Installation Guide are exclusive copyrights of Yamaha Corporation.
• Use of the software and this guide is governed by the SOFTWARE LICENSE AGREEMENT which the purchaser fully agrees to upon
breaking the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application.)
• Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of
the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this guide and the software.
• Copying of the commercially available music data is strictly prohibited except for your personal use.
• The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.
• Software such as the USB-MIDI driver may be revised and updated without prior notice. Make sure to check and download the latest version
of the software from the following site.
http://music.yamaha.com/download
• Future upgrades of application and system software and any changes in specifications and functions will be announced separately.
BESONDERE HINWEISE
• Dieses Programm und diese Installationsanleitung sind im Sinne des Urheberrechts alleiniges Eigentum der Yamaha Corporation.
• Die Benutzung des Programms und dieser Anleitung unterliegt der SOFTWARE-LIZENZVEREINBARUNG, mit der sich der Erwerber
durch Öffnen des Siegels der Programmverpackung uneingeschränkt einverstanden erklärt. (Bitte lesen Sie die VEREINBARUNG am Ende
dieser Anleitung vor Installation der Anwendung sorgfältig durch.)
• Das Kopieren der Software und die Reproduktion dieser Anleitung, in welcher Form auch immer, in Teilen oder als Ganzes, sind nur mit
schriftlicher Genehmigung des Herstellers erlaubt und sonst ausdrücklich verboten.
•Yamaha leistet keinerlei Garantie hinsichtlich der Benutzung des Programms und der zugehörigen Dokumentation und übernimmt keine
Verantwortung für die Ergebnisse der Benutzung dieser Anleitung oder des Programms.
• Das Kopieren im Handel erhältlicher Musikdaten ist nur für Ihren Privatgebrauch zulässig und sonst streng untersagt.
• Die in dieser Installationsanleitung erwähnten Firmen- und Produktnamen sind Warenzeichen bzw. eingetragene Warenzeichen der
betreffenden Firmen.
• Software wie z.B. der USB MIDI Driver kann ohne vorherige Benachrichtigung überarbeitet und aktualisiert werden. Achten Sie darauf, auf
der folgenden Website nach der neuesten Version der Software zu suchen und sie herunterzuladen.
http://music.yamaha.com/download
• Zukünftige Aktualisierungen von Anwendungs- und Systemsoftware sowie jede Änderung der technischen Daten und Funktionen werden
separat bekanntgegeben.
REMARQUES PARTICULIERES
• Les droits d’auteurs (copyright) de ce logiciel et de ce manuel d’installation appartiennent exclusivement à Yamaha Corporation.
•L’usage de ce logiciel et de ce manuel est défini par l’accord de licence auquel l’acheteur déclare souscrire sans réserve lorsqu’il ouvre le sceau
de l’emballage du logiciel. (Veuillez donc lire attentivement l’accord de licence du logiciel situé à la fin de ce manuel avant d’installer le
logiciel.)
•Toute copie du logiciel et toute reproduction totale ou partielle de ce manuel, par quel moyen que ce soit, est expressément interdite sans
l’autorisation écrite du fabricant.
•Yamaha n’offre aucune garantie en ce qui concerne l’utilisation du logiciel et de la documentation. Yamaha ne peut en aucun cas être tenu
responsable des dommages éventuels résultant de l’utilisation de ce manuel et de ce logiciel.
•Toute copie de données musicales commercialisées est formellement interdite, sauf pour usage personnel.
• Les noms des firmes et des produits apparaissant dans ce manuel d’installation sont des marques commerciales ou des marques déposées
appartenant à leurs détenteurs respectifs.
• Les logiciels tels que le pilote USB MIDI sont susceptibles d’être révisés et mis à jour sans avertissement préalable. Veuillez toujours à vérifier
la version du logiciel utilisée et à télécharger la dernière version en date sur le site suivant :
http://music.yamaha.com/download
• Les remises à jour du programme et du système ainsi que toute modification des caractéristiques et fonctions seront annoncées séparément.
AVISOS ESPECIALES
• El copyright del software y de la guía de instalación es propiedad exclusiva de Yamaha Corporation.
• La utilización de este software y de esta guía debe ajustarse al CONTRATO PARA USO DE SOFTWARE BAJO LICENCIA, con el que el
comprador manifiesta su total conformidad al abrir el paquete de software. (Lea detenidamente el CONTRATO que se incluye al final de esta
guía antes de instalar la aplicación).
• La copia del software o la reproducción total o parcial de este manual por cualquier medio sin la autorización escrita del fabricante está
expresamente prohibida.
•Yamaha no asume responsabilidad alguna ni ofrece garantía alguna en relación con el uso del software y de la documentación, y no puede ser
declarada responsable de los resultados de la utilización de este manual ni del software.
• Este disco es un CD-ROM. No intente reproducirlo en un reproductor de CD de audio, porque al hacerlo se podrían causar daños irreparables
en el reproductor.
• Queda terminantemente prohibida la copia de datos musicales disponibles comercialmente, excepto para uso personal.
• El software, por ejemplo el controlador MIDI USB, se puede revisar y actualizar sin previo aviso. Compruebe que existe la versión más reciente
del software y descárguela en el sitio siguiente:
http://music.yamaha.com/download
• Los nombres de compañías y de productos que aparecen en esta guía de instalación son marcas o marcas registradas de sus respectivas
compañías.
EnglishDeutschFrançaisEspañol
EN
DE
FR
ES
2
Accessory CD-ROM for Windows Installation Guide
English
Important Notices about the CD-ROM
Data Types
This CD-ROM includes application software. Please refer to page 4 for software installation instructions.
This CD-ROM is not meant for use with an audio/visual system (CD player, DVD player, etc.). Never attempt to use the disk
on equipment other than a computer.
Operating System (OS)
The applications in this CD-ROM are provided in versions for Windows operating systems.
CD-ROM Installation Procedure
Before breaking the seal of the software packaging, please read carefully the Software License Agreement at the end of this guide.
1
Check the system requirements to make sure that the software will run on your computer (page 3).
2
Insert the included CD-ROM into the CD-ROM drive.
The Start window should appear automatically. (Users of Windows Vista will need to click [Start.exe] to open the Start window after
inserting the CD-ROM.)
3
Connect the instrument to the computer.
Refer to the Owner’s Manual of the instrument.
4
Install the USB-MIDI driver to the computer (page 4).
5
Install the software (page 6).
6
Start up the software.
For subsequent operations, refer to the owner’s manual for each software program (online help/PDF manual).
If you have any problems in driver installation, refer to the “Troubleshooting” on page 7.
n
To view PDF files, you must install Adobe Reader on your computer.
If you do not have Adobe Reader, you can download the application from the Adobe website at the following URL:
http://www.adobe.com
Accessory CD-ROM for Windows Installation Guide
3
English
Contents of the CD-ROM
The start window as shown below will appear automatically when you insert the included CD-ROM. (Users of Windows Vista will need to
click [Start.exe] to open the Start window after inserting the CD-ROM.) By clicking each menu on the Start window, you can access the User
Registration page on the Internet and download some of the wide variety of application software available.
• All the applications listed above are supplied with online/PDF manuals.
Minimum System Requirements
n
For the System Requirements of the other software available in the CD-ROM, see the respective download page on the web. The download page can be
displayed by clicking the software menu on the Start window and the “download” button in the next page.
Application / Data Name Folder Name Contents
1
USB-MIDI Driver
(Windows 2000/XP)
USBdrv2k_
This software is necessary when using your instrument with a computer via a
USB connection. It enables MIDI communication and control between the
instrument and the computer.
USB-MIDI Driver
(Windows Vista/XP x64)
USBdrvVista_
2
Digital Music Notebook DMN_
Digital Music Notebook is a combination music learning program and online
service that makes it easy and fun to practice and master your favorite songs.
You can use the convenient and powerful Digital Music Notebook functions
with the demo song after installing Digital Music Notebook.
Digital Music Notebook Flash Demo DMN_FlashDemo
Full-motion demo software which introduces all features of the Digital Music
Notebook, from within the program.
3
Musicsoft Downloader (Available at Yamaha website.)
Utilizing a connection between the instrument and a computer, this application
allows you to directly download song data to the instrument.
Microsoft Downloader can be downloaded from the Internet.
4
Internet Direct Connection Flash Demo (Available at Yamaha website.)
Full-motion demo software which introduces all features of the Internet Direct
Connection, from within the program.
Please note that the Internet Direct Connection function may not be available
depending on your instrument.
Application/Data
OS CPU Memory Hard Disk Display
USB Driver for Windows
2000/XP
Windows 2000/XP Home
Edition/XP Professional
166 MHz or higher; Intel®
Pentium®/Celeron® Processor
family
32 MB or more
(64 MB or more is
recommended)
at least 3 MB of free
space
-
USB Driver for Windows
Vista/XP x64
Windows Vista/XP Professional
x64 Edition
800 MHz or higher; Intel®
Pentium®/Celeron® Processor
family or Intel® 64 compatible
processor
512 MB or more
at least 3 MB of free
space
-
Digital Music Notebook
Windows XP Home/
Professional Edition, Service
Pack 1a (SP1a) more/Windows
Vista
* Only 32-bit is supported.”
400 MHz or higher processor
clock speed (Intel® Pentium®/
Celeron®Processor family, or
compatible processor
recommended)”
128 MB or more
(256 MB or more is
recommended)
at least 150 MB of
free space
1024 x 768
HighColor (16-bit)
Digital Music Notebook
(Requirements for playing
content with video
included.)
Windows 2000/XP Home
Edition/XP Professional/Vista
* Only 32-bit is supported.
1 GHz or higher; Intel®
Pentium®/Celeron® Processor
family (1.4 GHz or more is
recommended)
256 MB or more
2341
4
Accessory CD-ROM for Windows Installation Guide
English
Software Installation
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
USB-MIDI Driver
To operate the instrument from your computer via USB, you’ll
need to install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and
forth between sequence software and the instrument via a USB cable.
For Windows XP: See the column at right.
For Windows 2000: See page 5.
For Windows Vista: See page 5.
n
See the Yamaha Download page at the following URL for up-to-date
news on USB-MIDI driver:
http://music.yamaha.com/download/
Installing the driver on Windows XP
1 Start the computer and use the “Administrator” account
to log on to Windows XP.
2 Select [Start] → [Control Panel].
If the control panel appears as “Pick a category”, click
“Switch to Classic View” in the upper left of the window.
All control panels and icons will be displayed.
3
Go to [System] → [Hardware] → [Driver Signing
Options] and check the radio button to the left of
“Ignore” and click [OK].
4 Click the [OK] button to close System Properties, and
then click “X” in the upper right of the window to close
the Control Panel.
5 Insert the included CD-ROM into the CD-ROM drive.
The Start window will appear automatically.
6 First, make sure the POWER switch on the instrument is set
to OFF, then use a USB cable to connect the USB connector of
the computer to the USB TO HOST connector of the
instrument. When the instrument is turned on, the computer
automatically displays the “Found New Hardware Wizard.”
If the Wizard window is not displayed automatically, refer to
“Troubleshooting.”
If the system displays “Found New Hardware” in the lower right
corner, wait until “Found New Hardware Wizard” is displayed. (The
Wizard window may take a while to display on some computers.)
If the Wizard window prompts you to specify whether or not
to connect to Windows Update, select the radio button for
“No, not this time,” then click [Next].
7 Check the radio button to the left of “Install the
software automatically (Recommended).” Click [Next].
The system starts the installation.
n If during the installation the system displays “...has not passed
Windows Logo testing to verify its compatibility with Windows
XP,” click [Continue Anyway].
8 When the installation is complete, the system displays
“Completing the Found New Hardware Wizard.” Click [Finish].
(The Wizard window may take a while to display on some computers.)
9 Restart the computer.
If the system displays “Found New Hardware” in the lower right
corner, wait until “System Settings Change” is displayed. (The
Wizard window may take a while to display on some computers.)
n This Wizard window will not appear when using Windows XP
Professional x64 Edition. There is no need to restart the computer.
) When using Windows XP Professional x64 Edition, the
Support Module must be installed.
After installing the USB-MIDI drivers for all the connected
USB devices, select “My Computer” from the Start menu.
Right-click the CD-ROM icon and select “Open” from the pop-
up menu. Select “USBdrvVista_”
→ “XPx64SupportModule”
→ “Setup.exe” and launch “Setup.exe.” Follow the on-screen
directions.
n Once the Support Module is installed, this step is not necessary,
even if you’ve connected a new USB device or updated the USB-
MIDI driver.
The USB-MIDI driver installation is complete.
Uninstall (Removing the installed application)
To remove any installed application software:
Select [START] → [Settings] → [Control Panel] → [Add/
Remove Programs] → [Install/Uninstall], then select the
application to be removed and click [Add/Remove...].
Follow the on-screen instructions to uninstall the
application.
n The button names or menus may differ depending on the
computer OS.
n For instructions on uninstalling the USB-MIDI driver, refer to
“How can I remove the driver?” in the “Troubleshooting”
section (page 7).
Check the drive name of the CD-ROM drive you will be using
(D:, E:, Q:, etc.) The drive name is displayed beside the CD-
ROM icon in your “My Computer” folder. The root directory
of the CD-ROM drive will be D:\ , E:\ , or Q:\ , respectively.
Computer
MIDI instrument (Clavinova, etc.)
USB cable
Driver
Sequence
Software
Accessory CD-ROM for Windows Installation Guide 5
English
Installing the driver on Windows 2000
1 Start the computer and use the “Administrator” account
to log on to Windows 2000.
2 Select [My Computer] → [Control Panel] → [System] →
[Hardware] → [Driver Signing] → [File Signature
Verification], and check the radio button to the left of
“Ignore—Install all files, regardless of file signature”
and click [OK].
3 Insert the included CD-ROM into the CD-ROM drive.
The Start window will appear automatically.
4 First, make sure the POWER switch on the instrument is set to
OFF, then use a USB cable to connect the USB connector of the
computer to the USB TO HOST connector of the instrument.
When the instrument is turned on, the computer automatically
displays the “Found New Hardware Wizard.” Click [Next].
(The Wizard window may take a while to display on some computers.)
If the Wizard window is not displayed automatically, refer to
“Troubleshooting.”
5 Check the radio button to the left of “Search for a suitable
driver for my device (Recommended).” Click [Next].
6 Check the “CD-ROM drives” box and uncheck all other
items. Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it
checks for the driver. Specify the “USBdrv2k_” folder of the CD-
ROM drive (such as D:\USBdrv2k_\) and continue the installation.
7 Click [Next].
n
If the Wizard panel informs you that “The software you are about
to install does not contain a Microsoft digital signature,” click [Yes].
8 When the installation is complete, the system displays
“Completing the Found New Hardware Wizard.” Click [Finish].
(The Wizard window may take a while to display on some computers.)
9 Restart the computer.
The USB-MIDI driver installation is complete.
Installing the driver on Windows Vista
1 Start the computer and use the “Administrator” account
to log on to Windows Vista.
2 Insert the included CD-ROM into the CD-ROM drive.
The AutoPlay window will appear.
3 Click [Run Start.exe].
The Start window will appear automatically.
4 First, make sure the POWER switch on the instrument
is set to OFF, then use a USB cable to connect the USB
connector of the computer to the USB TO HOST
connector of the instrument. When the instrument is
turned on, the computer automatically displays the
“Found New Hardware” window. Click “Locate and
install driver software (recommended)”.
If the window is not displayed automatically, refer to
“Troubleshooting.” (Some computers may take a while to
display the window.)
n If the “User Account Control” window appears, click [Continue].
5 If a message allowing Windows to search online for
driver software appears, click “Don’t search online.”
6 If a message prompting you to insert the disk that came
with your device appears, click [Next].
The system starts the installation.
n If the “Windows Security” window appears, confirm this software
is authored by Yamaha Corporation then click [Install].
7 When the installation is complete, the system displays
the message “The software for this device has been
successfully installed.” Click [Close].
(Some computers may take a while to display the window.)
The USB-MIDI driver installation is complete.
6 Accessory CD-ROM for Windows Installation Guide
English
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Digital Music Notebook
IMPORTANT
• When installing Digital Music Notebook to Windows XP,
or Vista, make sure to log on to the Administrator account.
• When installing the Digital Music Notebook, make sure
that Internet Explorer 6.0 (with SP1) or higher is
installed to your computer.
•Credit card settlement is required to purchase Digital
Music Notebook content. Credit card processing may not
be possible for some areas, so please check with your
local authorities to make sure that your credit card can
be used.
n
Use of the DMN (Digital Music Notebook) is governed by the
SIBELIUS SCORCH LICENSE AGREEMENT, which the purchaser
fully agrees to when using the application. Please read carefully the
AGREEMENT on page 9 in English, before using the application.
1 Insert the included CD-ROM into the CD-ROM drive of
the computer.
The Start window appears on the screen. Each menu on the
window indicates the application or data contained in the
Accessory CD-ROM.
2 Click “DIGITAL MUSIC NOTEBOOK” on the Start window.
3
Click the “Install” button, and follow the on-screen
instructions to install the software.
For Digital Music Notebook operating instructions see the help
menu: launch the Digital Music Notebook application and
click “Help”.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Musicsoft Downloader
IMPORTANT
• When installing Musicsoft Downloader to Windows XP,
2000 or Vista, make sure to log on to the Administrator
account.
•To install Musicsoft Downloader, your computer must be
connected to the Internet and be online.
•For the instrument including this Accessory CD-ROM,
you can use only the Musicsoft Downloader as a file
transfer application software. Other applications such as
File Utility and Song Filer cannot be used.
1 Insert the included CD-ROM into the CD-ROM drive of
the computer.
The Start window appears on the screen. Each menu on the
window indicates the application or data contained in the
Accessory CD-ROM.
2 Click “Musicsoft Downloader” on the Start window.
The page which explains the details about Musicsoft
Downloader is displayed on the window.
3 Click “Musicsoft Downloader Download” button at the
bottom of the window.
The Download page on the web is displayed. Verify that your
system meets the requirements before installing the software.
Accessory CD-ROM for Windows Installation Guide 7
English
Troubleshooting
The driver cannot be installed.
• Is the USB cable connected correctly?
→Check the USB cable connection.
→Disconnect the USB cable, then connect it again.
• Is the USB function enabled on your computer?
→When you connect the instrument to the computer for
the first time, if the “Add New Hardware Wizard” does not
appear, the USB function on the computer may be disabled.
Perform the following steps.
1 Select [Control Panel]* → [System] → [Hardware] → [Device
Manager] (for Windows XP/2000), or select [Control Panel] →
[Device Manager] (for Windows Vista).
* Classic View only in Windows XP.
2 Make sure that no “!” or “x” marks appear at “Universal serial
bus controller” or “USB Root Hub.” If you see an “!” or “x” mark,
the USB controller is disabled.
• Is any unknown device registered?
→If driver installation fails, the instrument will be marked as an
“Unknown device,” and you will not be able to install the driver.
Delete the “Unknown device” by following the steps below.
1 Select [Control Panel]* → [System] → [Hardware] → [Device
Manager] (for Windows XP/2000), or select [Control Panel] →
[Device Manager] (for Windows Vista).
* Classic View only in Windows XP.
2 Look for “Other devices” in the menu “View devices by type.”
3 If you find “Other devices,” double-click it to extend the tree to
look for “Unknown device.” If one appears, select it and click the
[Remove] button.
4 Remove the USB cable from the instrument, and make the
connection again.
5 Install the driver again. (See page 4.)
When controlling the instrument from your computer via USB,
the instrument does not operate correctly or no sound is heard.
• Did you install the driver (page 4)?
• Is the USB cable connected correctly?
•Are the volume settings of the instrument, playback device, and
application program set to the appropriate levels?
•Have you selected an appropriate port in the sequence software?
• On the Clavinova, check whether the Piano Lock is engaged or
not.
•Are you using the latest USB-MIDI driver?
The latest driver can be downloaded from the web site (page 4).
Playback response is delayed.
• Does your computer satisfy the system requirements?
• Is any other application or device driver running?
Cannot suspend or resume the computer correctly.
• Do not suspend the computer while the MIDI application is
running.
•You may not be able to suspend/resume normally, depending on the
particular environment (USB Host Controller, etc.). Even so, simply
disconnecting and connecting the USB cable will allow you to use
the instrument functions again.
How can I remove the driver?
1 Start the computer and use the “Administrator” account to
log on to Windows.
Close all applications and windows that are open.
2 Insert the included CD-ROM into the CD-ROM drive.
3 Select [Start] → [My Computer] (for Windows XP), or select
[My Computer] (for Windows 2000), or select [Start] →
[Computer] (for Windows Vista).
4 Right-click the CD-ROM icon and select “Open” from the
pop-up menu.
5 Select “USBdrvVista_” or “USBdrv2k_” folder →
“uninstall” folder → “uninstall.exe” file and launch the
“uninstall.exe.” file.
Follow the on-screen instructions to uninstall the driver.
n When using a 64-bit OS, click “uninstall_x64.exe.” from the
“USBdrvVista_” folder.
n If the “User Account Control” window appears, click [Continue].
8 Accessory CD-ROM for Windows Installation Guide
English
ATTENTION
SOFTWARE LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU
(AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY BREAKING THE SEAL OF THIS PACKAGE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH
THE TERMS, DO NOT INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s)
and data (“SOFTWARE”) accompanying this Agreement. The term
SOFTWARE shall encompass any updates to the accompanying software and
data. The SOFTWARE is owned by Yamaha and/or Yamaha’s licensor(s), and is
protected by relevant copyright laws and all applicable treaty provisions. While
you are entitled to claim ownership of the data created with the use of
SOFTWARE, the SOFTWARE will continue to be protected under relevant
copyrights.
• You may use the SOFTWARE on a single computer.
• You may make one copy of the SOFTWARE in machine-readable form
for backup purposes only, if the SOFTWARE is on media where such
backup copy is permitted. On the backup copy, you must reproduce
Yamaha’s copyright notice and any other proprietary legends that were
on the original copy of the SOFTWARE.
• You may permanently transfer to a third party all your rights in the
SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
• You may not engage in reverse engineering, disassembly, decompilation
or otherwise deriving a source code form of the SOFTWARE by any
method whatsoever.
• You may not reproduce, modify, change, rent, lease, or distribute the
SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
• You may not electronically transmit the SOFTWARE from one
computer to another or share the SOFTWARE in a network with other
computers.
• You may not use the SOFTWARE to distribute illegal data or data that
violates public policy.
• You may not initiate services based on the use of the SOFTWARE
without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by
means of the SOFTWARE, are subject to the following restrictions which you
must observe.
• Data received by means of the SOFTWARE may not be used for any
commercial purposes without permission of the copyright owner.
• Data received by means of the SOFTWARE may not be duplicated,
transferred, or distributed, or played back or performed for listeners in
public without permission of the copyright owner.
• The encryption of data received by means of the SOFTWARE may not be
removed nor may the electronic watermark be modified without permission
of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE
and remains effective until terminated. If any copyright law or provisions of this
Agreement is violated, the Agreement shall terminate automatically and
immediately without notice from Yamaha. Upon such termination, you must
immediately destroy the licensed SOFTWARE, any accompanying written
documents and all copies thereof.
4. LIMITED WARRANTY ON MEDIA
As to SOFTWARE sold on tangible media, Yamaha warrants that the tangible
media on which the SOFTWARE is recorded will be free from defects in
materials and workmanship under normal use for a period of fourteen (14) days
from the date of receipt, as evidenced by a copy of the receipt. Yamaha’s entire
liability and your exclusive remedy will be replacement of the defective media if
it is returned to Yamaha or an authorized Yamaha dealer within fourteen days
with a copy of the receipt. Yamaha is not responsible for replacing media
damaged by accident, abuse or misapplication. TO THE FULLEST EXTENT
PERMITTED BY LAW, YAMAHA EXPRESSLY DISCLAIMS ANY IMPLIED
WARRANTIES ON THE TANGIBLE MEDIA, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
5. DISCLAIMER OF WARRANTY ON
SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole
risk. The SOFTWARE and related documentation are provided “AS IS” and
without warranty of any kind. NOTWITHSTANDING ANY OTHER
PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS
ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT
WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT
WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS,
THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
6. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT
USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR
ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES,
LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF
YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability
to you for all damages, losses and causes of action (whether in contract, tort or
otherwise) exceed the amount paid for the SOFTWARE.
7. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be
attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD
PARTY SOFTWARE, you acknowledge and agree that you must abide by the
provisions of any Agreement provided with the THIRD PARTY SOFTWARE
and that the party providing the THIRD PARTY SOFTWARE is responsible for
any warranty or liability related to or arising from the THIRD PARTY
SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY
SOFTWARE or your use thereof.
•Yamaha provides no express warranties as to the THIRD PARTY
SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
•Yamaha shall not provide you with any service or maintenance as to the
THIRD PARTY SOFTWARE.
•Yamaha is not liable to you or any other person for any damages, including,
without limitation, any direct, indirect, incidental or consequential damages,
expenses, lost profits, lost data or other damages arising out of the use,
misuse or inability to use the THIRD PARTY SOFTWARE.
8. GENERAL
This Agreement shall be interpreted according to and governed by Japanese law
without reference to principles of conflict of laws. Any dispute or procedure
shall be heard before the Tokyo District Court in Japan. If for any reason a court
of competent jurisdiction finds any portion of this Agreement to be
unenforceable, the remainder of this Agreement shall continue in full force and
effect.
9. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with
respect to use of the SOFTWARE and any accompanying written materials and
supersedes all prior or contemporaneous understandings or agreements, written
or oral, regarding the subject matter of this Agreement. No amendment or
revision of this Agreement will be binding unless in writing and signed by a
fully authorized representative of Yamaha.
English
Accessory CD-ROM for Windows Installation Guide 9
English
SIBELIUS SCORCH LICENSE
AGREEMENT
By installing and/or using this Product you (an individual or legal entity) agree with the Licensor to be bound by the terms of this License which will govern your use
of the Product. If you do not accept these terms, do not install or use this Product.
The Product is copyright © 1987-2007 Sibelius Software, a division of Avid Technology, Inc, and its licensors.
1. Definitions
In this License the following words and expressions have the following
meanings:
“License”: this agreement between you and the Licensor and, if permitted by the
context, the conditional license granted to you in this agreement.
“Licensor”: Avid Technology, Inc., of Avid Technology Park, One Park West,
Tewksbury, MA 01876 USA, through its division Sibelius Software, of 20-23
City North, Fonthill Road, London N4 3HF, UK “Product”: the Software and the
Documentation.
“Software”: the Sibelius Scorch web browser plug-in, Opus, Helsinki, Inkpen2
and Reprise font families, any other programs or files supplied by the Licensor
which are included in or with the Sibelius Scorch installer, and the Sibelius
Scorch installer.
“Documentation”: any documentation in any form relating to the Software
supplied to you with the Software or by the Licensor.
2. License
2.1 The Licensor grants to you a non-exclusive non-transferable license to use
this Software in accordance with the Documentation on any number of
computers. Title to the Product is not transferred to you. Ownership of the
Product remains vested in the Licensor and its licensors, subject to the
rights granted to you under this License. All other rights are reserved.
2.2 You may make one printout for your own use of any part of the
Documentation provided in electronic form. You shall not make or permit
any third party to make any further copies of any part of the Product
whether in eye or machine-readable form.
2.3 You shall not, and shall not cause or permit any third party to,
(1) translate, enhance, modify, alter or adapt the Product or any part of it
for any purpose (including without limitation for the purpose of error
correction);
(2) create derivative works based on the Product, or cause the whole or any
part of the Product to be combined with or incorporated into any other
program, file or product, for any purpose; or
(3) use the Software to create files in any format (other than temporary
files created and required by your computer’s operating system or web
browser), including without limitation screen capture files, files
generated from the Software’s playback, graphics files and print files,
for any purpose, except for creating MIDI files (if permitted by the
Software) for private non-commercial use.
2.4 You shall not, and shall not cause or permit any third party to, decompile,
decode, disassemble or reverse engineer the Software in whole or in part for
any purpose.
2.5 You shall not, and shall not cause any third party to, translate, convert,
decode or reverse engineer any file capable of being read by any copy or
version of the Software or any data transmitted to or from any copy or
version of the Software, in whole or in part for any purpose.
2.6 The Product or any part of it must not be used to infringe any right of
copyright or right of privacy, publicity or personality or any other right
whatsoever of any other person or entity.
3. Copyright
3.1 You acknowledge that copyright in the Product as a whole and in the
components of the Product as between you and the Licensor belongs to the
Licensor or its licensors and is protected by copyright laws, national and
international, and all other applicable laws.
4. Disclaimer of Liability
4.1 In consideration of the fact that the Product is licensed hereunder free of
charge, (a) the Licensor disclaims any and all warranties with respect to the
Product, whether expressed or implied, including without limitation any
warranties that the Product is free from defects, will perform in accordance
with the Documentation, is merchantable, or is fit for any particular
purpose, and (b) the Licensor shall not have or incur any liability to you for
any loss, cost, expense or claim (including without limitation any liability
for loss or corruption of data and loss of profits, revenue or goodwill and
any type of special, indirect or consequential loss) that may arise out of or
in connection with your installation and use of the Product.
5. Termination
5.1 This License shall terminate automatically upon your destruction of the
Product. In addition, the Licensor may elect to terminate this License in the
event of a material breach by you of any condition of this License or of any
of your representations, warranties, covenants or obligations hereunder.
Upon notification of such termination by the Licensor, you will
immediately delete the Software from your computer and destroy the
Documentation.
6. Miscellaneous
6.1 No failure to exercise and no delay in exercising on the part of the Licensor
of any right, power or privilege arising hereunder shall operate as a waiver
thereof, nor shall any single or partial exercise of any right, power or
privilege preclude any other or further exercise thereof or the exercise of
any other right, power or privilege. The rights and remedies of the Licensor
in connection herewith are not exclusive of any rights or remedies provided
by law.
6.2 You may not distribute, loan, lease, sub-license, rent or otherwise transfer
the Product to any third party.
6.3 You agree to the use of your personal data in accordance with the Licensor’s
privacy policy (available from the Licensor or on www.sibelius.com), which
may change from time to time.
6.4 This License is intended by the parties hereto to be a final expression of
their agreement with respect to the subject matter hereof and a complete
and exclusive statement of the terms of such agreement. This License
supercedes any and all prior understandings, whether written or oral,
between you and the Licensor relating to the subject matter hereof.
6.5 (This section only applies if you are resident in the European Union:) This
License shall be construed and governed by the laws of England, and both
parties agree to submit to the exclusive jurisdiction of the English courts.
6.6 (This section only applies if you are not resident in the European Union:)
This License shall be construed and enforced in accordance with and
governed by the laws of the State of California. Any suit, action or
proceeding arising out of or in any way related or connected to this License
shall be brought and maintained only in the United States District Court for
the Northern District of California, sitting in the City of San Francisco.
Each party irrevocably submits to the jurisdiction of such federal court over
any such suit, action or proceeding. Each party knowingly, voluntarily and
irrevocably waives trial by jury in any suit, action or proceeding (including
any counterclaim), whether at law or in equity, arising out of or in any way
related or connected to this License or the subject matter hereof.
(License v5.0 (DMN), 30 July 2007)
/
