DSP-AX3200
GB
AV AMPLIFIER
AMPLIFICATEUR AUDIO-VIDEO
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Japan
V817900
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
DSP-AX3200
CAUTION
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this unit in a well ventilated, cool, dry, clean
place with at least 30 cm on the top, 20 cm on the
right and left, and 10 cm at the back of this unit
— away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold.
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds. To prevent fire or electrical
shock, do not place this unit where it may get
exposed to rain, water, and/or any type of liquid.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this
unit in a environment with high humidity (i.e. a
room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal
injury.
5 On the top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may
cause electrical shock to the user and/or
damage to this unit.
6 Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than
specified is dangerous and may cause fire,
damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any
damage resulting from use of this unit with a
voltage other than specified.
13 To prevent damage by lightning, disconnect the
power cord from the wall outlet during an
electrical storm.
14 Take care of this unit so that no foreign objects
and/or liquid drops inside this unit.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
15 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reasons.
16 When not planning to use this unit for long
periods of time (i.e. vacation), disconnect the AC
power plug from the wall outlet.
17 Be sure to read the “TROUBLESHOOTING” section
on common operating errors before concluding
that this unit is faulty.
18 Before moving this unit, press STANDBY/ON to set
this unit in the standby mode, and disconnect the
AC power plug from the wall outlet.
This unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed to
consume a very small quantity of power.
■ For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note
• The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
■ Special Instructions for U.K.
Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED
IN ACCORDANCE WITH THE FOLLOWING
CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
English
INTRODUCTION
PREPARATION
BASIC
OPERATION
ADDITIONAL
INFORMATION
ADVANCED
OPERATION
1
CONTENTS
INTRODUCTION
INTRODUCTION
CONTENTS ....................................................... 1
FEATURES ........................................................ 2
GETTING STARTED ....................................... 3
Checking the Package Contents ............................... 3
Installing Batteries in the Remote Control ............... 3
CONTROLS AND FUNCTIONS .................... 4
Front Panel ............................................................... 4
Remote Control ........................................................ 6
Using the Remote Control ........................................ 7
Front Panel Display .................................................. 8
Rear Panel ................................................................ 9
PREPARATION
SPEAKER SETUP .......................................... 10
Speakers to Be Used ............................................... 10
Speaker Placement ................................................. 10
Connecting the Speakers ........................................ 11
CONNECTIONS ............................................. 14
Before Connecting Components ............................ 14
Connecting Video Components .............................. 14
Connecting Audio Components ............................. 16
Connecting to an External Amplifier ..................... 18
Connecting an External Decoder ............................ 18
Connecting the Power Supply Cords ...................... 19
Turning on the Power ............................................. 19
ON-SCREEN DISPLAY (OSD) ..................... 20
OSD Modes ............................................................ 20
Selecting the OSD Mode ........................................ 20
SPEAKER MODE SETTINGS ..................... 21
Summary of SPEAKER SET Items 1A through 1F ...
21
ADJUSTING THE SPEAKER OUTPUT
LEVELS ....................................................... 22
Before You Begin ................................................... 22
Using the Test Tone (TEST DOLBY SUR.) .......... 22
BASIC OPERATION
BASIC PLAYBACK ........................................ 24
Input Modes and Indications .................................. 26
Selecting a Sound Field Program ........................... 27
Selecting PRO LOGIC or Neo: 6 ....................... 28
DIGITAL SOUND FIELD PROCESSING
(DSP) ............................................................ 30
Understanding Sound Fields .................................. 30
Hi-Fi DSP Programs............................................... 30
CINEMA-DSP ................................................. 32
Sound Design of CINEMA-DSP ............................ 32
CINEMA-DSP Programs ....................................... 34
BASIC RECORDING ..................................... 36
ADVANCED OPERATION
REMOTE CONTROL FEATURES .............. 37
Control Area ........................................................... 37
Setting the Manufacturer Code .............................. 38
Programming a New Remote Control Function
(Learn Feature) ................................................... 39
Using the Macro Feature ........................................ 40
Changing the Source Name in the Display Window
............................................................................ 42
Clearing Learned Functions, Macros, Renamed
Source Names, and Setup Manufacturer Codes ...
42
Clearing a Learned Function or Macro .................. 43
Each Component Control Area .............................. 45
SET MENU ...................................................... 50
Adjusting the Items on the SET MENU................. 50
1 SPEAKER SET (speaker mode settings) ........... 51
2 LOW FRQ TEST ............................................... 54
3 L/R BALANCE (balance of the left and right main
speakers)............................................................. 55
4 HP TONE CTRL (headphone tone control) ....... 55
5 CENTER GEQ (center graphic equalizer) ......... 55
6 INPUT RENAME .............................................. 56
7 I/O ASSIGNMENT ............................................ 56
8 INPUT MODE (initial input mode) ................... 57
9 PARAM. INI (parameter initialization) ............. 58
10 LFE LEVEL ..................................................... 58
11 D-RANGE ........................................................ 59
12 SP DELAY TIME ............................................. 59
13 DISPLAY SET .................................................. 60
14 MEMORY GUARD ......................................... 60
ADJUSTING THE LEVEL OF THE EFFECT
SPEAKERS .................................................. 61
SLEEP TIMER ................................................ 62
Setting the Sleep Timer .......................................... 62
Canceling the Sleep Timer ..................................... 62
ADDITIONAL INFORMATION
SOUND FIELD PROGRAM PARAMETER
EDITING ..................................................... 63
What is a sound field? ............................................ 63
Sound Field Program Parameters ........................... 63
Changing Parameter Settings ................................. 64
Resetting a Parameter to the Factory-set Value ...... 64
DIGITAL SOUND FIELD PARAMETER
DESCRIPTIONS ......................................... 65
TROUBLESHOOTING .................................. 69
GLOSSARY ..................................................... 73
SPECIFICATIONS ......................................... 75
2
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks
of Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround” and “Neo: 6” are
trademarks of Digital Theater System, Inc.
FEATURES
Built-in 6-Channel Power Amplifier
◆ Minimum RMS Output Power
(0.02% THD, 20 Hz – 20 kHz, 8Ω)
Main: 120 W + 120 W
Center: 120 W
Rear: 120 W + 120 W
Rear center: 120 W
Multi-Mode Digital Sound Field
Processing
◆ Dolby Pro Logic/Dolby Pro Logic Decoder
◆ Dolby Digital/Dolby Digital Matrix 6.1 Decoder
◆ DTS/DTS ES (Matrix 6.1, Discrete 6.1)/DTS
Neo: 6 Decoder
◆ CINEMA DSP: Combination of YAMAHA DSP
Technology and Dolby Pro Logic, Dolby Digital
or DTS
◆ Virtual CINEMA DSP
◆ SILENT CINEMA DSP
Other Features
◆ 96-kHz/24-bit D/A Converter
◆ “SET MENU” which Provides You with 14 Items
for Optimizing This Unit for Your Audio/Video
System
◆ Test Tone Generator for Easier Speaker Balance
Adjustment
◆ 6-Channel External Decoder Input for Other
Future Formats
◆ BASS EXTENSION for Reinforcing Bass
Response
◆ On Screen Display Function Helpful in
Controlling This Unit
◆ S Video Signal Input/Output Capability
◆ Component Video Input/Output Capability
◆ Optical and Coaxial Digital Audio Signal Jacks
◆ Sleep Timer
◆ Remote Control with Preset Manufacturer Codes
and “Learning” Capability
◆ PROCESSOR DIRECT for no alteration of the
original signal
• y indicates a tip for your operation.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button
names differ between the main unit and the remote control, the button name on the remote control is given in parentheses in this
manual.
English
INTRODUCTION PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
3
TRANSMIT
RE-NAME
STANDBY
6CH INPUT
SOUND
SYSTEM
CLEAR LEARN MACRO
OFF ON
MACRO
PHONO
A
B
CD
DVD
VCR2/DVR
VCR 1
TITLE
MENU
CHAPTER
PAUSESTOPPOWER
REC
HALL 1
6.1/ES
DSP
10KEY
ROCK
CONCERT
MOVIE
THEATER 1
MOVIE
THEATER 2
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
CONCERT
VIDEO
TV
THEATER
ENTER-
TAINMENT
HALL 2
CHURCH
JAZZ CLUB
SELECT
/DTS
SUR.
CHP/INDEX
A/B/C/D/E
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
–+
ENTER
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-AU X
POWER
1
5
9
6
10
0
10
100
11 12
78
234
++
1 Open the battery compartment cover.
2 Insert three supplied batteries (LR6) in the
correct direction by aligning the + and –
marks on the batteries with the polarity
markings (+ and –) on the inside of the
battery compartment.
3 After new batteries are correctly inserted,
press the RESET button in the battery
compartment using a ball point pen or
similar object. (This does not clear the
contents of the memory.)
4 Replace the cover as pressing until it snaps
into place.
Connection GuideBatteries (3) (LR6)
Remote control
GETTING STARTED
Checking the Package Contents
Check your package to make sure it has the following items.
Power Cord
(Europe model only)
RESET button
DVD Player
Main Speaker
TV
Subwoofer
Center Speaker Rear Center
Speaker
Rear Speaker
CONNECTION
GUIDE
L
R
V
S
O
Analog audio signal
Optical digital signal
S video signal
Video signal
Signal flow
V817920
COMPONENT VIDEO
IMPEDANCE SELECTOR
SET BEFORE POWER ON
FRONT :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
FRONT :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
PRE OUT/MAIN IN
MAIN OUT
Y
P
R
/C
R
P
B
/C
B
DVD
MONITOR
OUT
DVD
IN
VCR 1
OUT
IN
VCR 2
/DVR
OUT
S VIDEO VIDEO
D-TV
/LD
CBL
/SAT
D-TV
/LD
MAIN IN
REAR (SURROUND)
SUB
WOOFER
CENTER
SPEAKERS
REARCENTER
MAIN
+
+
–
+
–
–
+
–
REAR
CENTER
RS-232C
(SURROUND)
REAR
CENTER
VIDEO
VIDEOS VIDEO
AUDIO
DIGITAL INPUT
SIGNAL GND
6CH INPUT
CENTER
MAIN
SURROUND
AUDIODIGITAL OUTPUT
MONITOR
OUT
PHONO
CBL
/SAT
CD
D-TV
/LD
DVD
CD-R
CD-R
MD/
TAPE
CD
OPTICAL
COAXIAL
SUB
WOOFER
CD
OUT (REC)
CD-R
IN (PLAY)
OUT (REC)
MD/TAPE
IN (PLAY)
R
L
R
L
R
L
R
L
R
L
R
L
R
L
AB
+
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
1
2
3
4
5
6
7
8
3
A
B
4
3
4
1
LR
AUDIO OUT S VIDEO
OUT
VIDEO
OUT
OPTICAL
OUT
COMPONENT
VIDEO OUT
VIDEO IN
VIDEO
OUT
OPTICAL
OUT
V
V
O
Right Left
Right Left
Installing Batteries in the Remote Control
■ Notes on batteries
• Change all of the batteries if you notice the condition
like; the operating range of the remote control
decreases, the indicator does not flash or its light
becomes dim.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Read the packaging
carefully as these different types of batteries may have
the same shape and color.
• If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing
new batteries.
If the remote control is without batteries for more than
3 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the manufacturer code and program
any acquired functions that may have been cleared.
4
CONTROLS AND FUNCTIONS
Front Panel
1 STANDBY/ON
Turns on and sets this unit in the standby mode. When
you turn on this unit, you will hear a click and there will
be a 4 to 5-second delay before this unit can reproduce
sound.
Standby mode
In this mode, this unit consumes a small amount of
power to receive infrared-signals from the remote
control.
2 Remote control sensor
Receives signals from the remote control.
3 Front panel display
Shows information about the operational status of this
unit (see page 8).
4 INPUT MODE
Sets the priority for the types of input signals (AUTO,
DTS, ANALOG) to receive when one component is
connected to two or more input jacks of this unit (see
page 26). Priority cannot be set when 6CH INPUT is
selected as the input source.
5 INPUT l / h
Selects the input source you want to listen to or watch.
6 VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
7 PHONES jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the PRE OUT jacks or to the speakers.
8 BASS EXTENSION
Turns on or off the BASS EXTENSION function at each
time the button is pressed, this feature boosts the bass
frequency of the left and right main channels by +6 dB
(60 Hz) while maintaining overall tonal balance. This
boost is useful if you do not use a subwoofer.
However, this boost may not be noticeable if “1B MAIN
SP” on the SET MENU is set to SMALL and “1E LFE/
BASS OUT” is set to SWFR.
9 PROCESSOR DIRECT
Turns on or off the PROCESSOR DIRECT function at
each time the button is pressed. When this is on, BASS,
TREBLE, and BASS EXTENSION are bypassed,
eliminating any alteration of the original signal.
0 SPEAKERS A/B
Turn on or off the set of main speakers connected to the A
and/or B terminals on the rear panel at each time its
corresponding button is pressed.
BASS
SPEAKERS
A
BASS
EXTENSION
PROCESSOR
DIRECT
B
VOLUME
INPUT
INPUT MODE
VIDEO AUX
SILENT
PHONES
S VIDEO VIDEO AUDIOLR
6CH
INPUT
OPTICAL
STANDBY
/
ON
NATURAL SOUND AMPLIFIER
TREBLE
– +
DIGITAL
EFFECT
– +
PROGRAM
STEREO
SET MENU
NEXT
–
+
REC OUT
V-AU X
VCR2
/DVR
VCR1
PHONO
CD
TUNER
MD/TAPE
DVD
SOURCE
D-TV/LD
CBL/SAT
CD-R
1
23
45
6
78
9
q
w
e
r
t
i
0
y u
5
English
INTRODUCTION PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONTROLS AND FUNCTIONS
V
O
L
U
M
E
N
A
T
UR
AL SO
UN
D A
V AM
PL
IFIER
YA
MAHA
To open, press gently on the lower part of the panel.
q BASS
Adjusts the low-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the low-frequency response.
w TREBLE
Adjusts the high-frequency response for the left and right
main channels.
Turn the control to the right to increase or to the left to
decrease the high-frequency response.
Note
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the left and
right main speakers.
e REC OUT
Selects the source you want to direct to the audio/video
recorder.
r STEREO/EFFECT
Switches the normal stereo or DSP effect reproduction.
When STEREO is selected, 2-channel input signals are
directed to the main left and right speakers without effect
sounds. All Dolby Digital and DTS audio signals except
for the LFE channel are mixed down to the main left and
right speakers.
t PROGRAM l / h
Selects the DSP program.
y 6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
The source selected by pressing 6CH INPUT takes
priority over the source selected with INPUT l / h (or
the input selector buttons on the remote control).
u NEXT — SET MENU –/+
Changes the SET MENU settings.
i VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
■ Opening and closing the front
panel door
When you are not operating the controls behind the front
panel door, close the door.
6
CONTROLS AND FUNCTIONS
TRANSMIT
RE-NAME
STANDBY
6CH INPUT
SOUND
SYSTEM
CLEAR LEARN MACRO
OFF ON
MACRO
PHONO
A
B
CD
DVD
VCR2/DVR
VCR 1
TITLE
MENU
CHAPTER
PAUSESTOPPOWER
REC
HALL 1
6.1/ES
DSP
10KEY
ROCK
CONCERT
MOVIE
THEATER 1
MOVIE
THEATER 2
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
PARAMETER
SET MENU
EFFECT
LEVEL
ON SCREEN
TESTSLEEP
TV MUTE
CONCERT
VIDEO
TV
THEATER
ENTER-
TAINMENT
HALL 2
CHURCH
JAZZ CLUB
SELECT
/DTS
SUR.
CHP/INDEX
A/B/C/D/E
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
– +
ENTER
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-AUX
POWER
1
5
9
6
10
0
10
100
11 12
78
234
++
1
2
3
4
5
6
7
8
0
w
e
r
t
9
q
y
u
i
o
p
d
g
f
s
j
k
h
a
Remote Control
This section describes the controls and their functions of
the remote control. See “REMOTE CONTROL
FEATURES” on pages 37 to 49 for operating other
components with this remote control.
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 RE-NAME
Used for changing the input source name in the display
window (see page 42).
3 TRANSMIT indicator
Flashes while the remote control is sending signals.
4 STANDBY
Sets this unit in the standby mode.
5 SYSTEM POWER
Turns on the power of this unit.
6 Display window
Shows the selected source component that you are
controlling.
7 SOURCE SELECT k/n
Selects the another component to control independently
from the input that has been selected by pressing an input
selector button.
8 LIGHT
Turns the light on or off. When you press this button
once, the light turns on for about ten seconds. Press again
to turn off the light.
9 10KEY/DSP
Selects the numeric button (10KEY) mode or DSP mode.
0 Operation buttons
Provides functions such as play, stop, skip, etc. for
operating your other components selected by the input
selector buttons.
q 6.1/ES
Turns on or off the Dolby Digital Matrix 6.1 or DTS ES
decoder with 10KEY/DSP set to the DSP position.
w LEVEL
Selects the effect speaker channel to be adjusted and sets
the level.
e ON SCREEN
Selects the on-screen display (OSD) mode for your video
monitor.
r SLEEP
Sets the sleep timer.
t TEST
Outputs the test tone to adjust the speaker levels.
y CLEAR
Used for clearing functions acquired when using the learn
and rename features, programmed macros, and set
manufacturer codes (see pages 42 to 44).
u LEARN
Used for setting up the manufacturer code or for
programming the functions of other remote controls (see
pages 38 and 39).
7
English
INTRODUCTION PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONTROLS AND FUNCTIONS
BASS
SPEAKERS
A
BASS
EXTENSION
PROCESSOR
DIRECT
B
VOLUME
INPUT
INPUT MODE
VIDEO AUX
SILENT
SET MENU
PHONES
NEXT
S VIDEO VIDEO AUDIOLR
6CH
INPUT
OPTICAL
STANDBY
/
ON
NATURAL SOUND AMPLIFIER
TREBLE REC OUT
– +
DIGITAL
V-AUX
VCR2
/DVR
VCR1
PHONO
EFFECT
CD
TUNER
MD/TAPE
DVD
SOURCE
D-TV/LD
CBL/SAT
CD-R
– +
PROGRAM
STEREO
–
+
30°30°
Approximately 6 m (20 feet)
i MACRO
Used to program a series of operations for control by a
single button (see pages 40 to 42).
o MACRO ON/OFF
Turns the macro function on and off.
p Å and ı
Switch the control area for the extra components that are
not connected to this unit without changing the input.
a Input selector buttons
Select the input source and change the control area.
s 6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
d DSP program/Numeric buttons
Select DSP programs or numbers according to the
position of 10KEY/DSP.
f MUTE
Mutes the sound. The MUTE indicator turns on when the
MUTE function is on. Press again to restore the audio
output to the previous volume level.
g VOLUME +/–
Increases or decreases the volume level.
h STEREO/EFFECT
Switches the normal stereo or DSP effect reproduction.
When STEREO is selected, 2-channel input signals are
directed to the main left and right speakers without effect
sounds. All Dolby Digital and DTS audio signals except
for the LFE channel are also directed to the main left and
right speakers.
j PARAMETER/SET MENU
Selects the PARAMETER mode or SET MENU mode.
k Cursor buttons k/n/–/+
Select and adjust DSP program parameters and SET
MENU items according to the position of PARAMETER/
SET MENU.
Using the Remote Control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
■ Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
8
CONTROLS AND FUNCTIONS
RL
LCR
RC RR
LFE
VIRTUAL
DTS
Neo
MOVIE THEATER
ENTERTAINMENT12
:6
DOLBY DIGITAL
PRO
LOGIC
VCR DVD TUNER CD
PHONO
CD RV AUX
DSP
DISCRETE
PCM
1
SILENT
SP
DIGITAL
VCR2/DVR
CBL
/
SAT
MD
/
TAPE
TV
/
LD
P. DIRECT
BASS
MUTE VOLUME
SLEEP
D
6.1
/
ES
PRO LOGIC
/
AB
67 0 q wer
12 345
89
1 Processor indicators
When any function of
DSP
, DTS, DISCRETE,
VIRTUAL, g,
6.1
/
ES
, and
PRO LOGIC
/
is
activated, its indicator lights up.
2 Input source indicator
Shows the current input source with a cursor.
3 SLEEP indicator
Lights up while the sleep timer is on.
4 MUTE indicator
Flashes up while the MUTE function is on.
5 VOLUME level indicator
Indicates the volume level.
6 v indicator
Lights up when this unit is reproducing PCM (pulse code
modulation) digital audio signals.
7 Headphones indicator
Lights up when headphones are connected.
8 SP A B indicators
Lights up according to which set of main speakers is
selected. Both indicators light up when both sets of
speakers are selected.
9 SILENT indicator
Lights up when headphones are connected with the sound
effect (see “SILENT CINEMA DSP” on page 29).
0 DSP program indicators
The name of the selected DSP program lights up when
the ENTERTAINMENT, MOVIE THEATER 1, MOVIE
THEATER 2 or V/DTS SURROUND DSP program is
selected.
q Multi-information display
Shows the current DSP program name and other
information when adjusting or changing settings.
w BASS indicator
Lights up while BASS EXTENSION is on.
e P. DIRECT
Lights up while PROCESSOR DIRECT is on.
r Input channel indicator
Indicates the channel components of input signals being
received.
Front Panel Display
9
English
INTRODUCTION PREPARATION
BASIC
OPERAIONT
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONTROLS AND FUNCTIONS
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
AC OUTLETS
RS-232C
+
+
6ΩMIN. /SPEAKER
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN. /SPEAKER
SWITCHED 100W MAX. TOTAL
COMPONENT VIDEO
PRE OUT/MAIN IN
MAIN OUT
Y
P
R
/C
R
P
B
/C
B
DVD
MONITOR
OUT
DVD
IN
VCR 1
OUT
IN
VCR 2
/DVR
OUT
TUNER
S VIDEO VIDEO
D-TV
/LD
CBL
/SAT
D-TV
/LD
MAIN IN
REAR (SURROUND)
SUB
WOOFER
CENTER
SPEAKERS
REARCENTER
MAIN
+
+
–
+
–
+
–
–
+
–
REAR
CENTER
(SURROUND)
REAR
CENTER
VIDEO
VIDEOS VIDEO
AUDIO
DIGITAL INPUT
GND
6CH INPUT
CENTER
MAIN
SURROUND
AUDIODIGITAL OUTPUT
MONITOR
OUT
PHONO
CBL
/SAT
CD
D-TV
/LD
DVD
CD-R
CD-R
MD/
TAP E
CD
OPTICAL
COAXIAL
SUB
WOOFER
CD
OUT (REC)
CD-R
IN (PLAY)
OUT (REC)
MD/TAPE
IN (PLAY)
R
L
R
L
R
L
R
L
R
L
R
L
R
L
AB
1
2
3
4
5
6
7
8
3
A
B
4
3
4
1
2
12 3 4 5 6
782 9 0q
(Europe model)
1 DIGITAL OUTPUT jacks
2 Audio component jacks
See pages 16 and 17 for connection information.
3 Video component jacks
See pages 14 and 15 for connection information.
4 PRE OUT/MAIN IN jacks
See page 18 for connection information.
5 RS232C terminal
This is a control expansion terminal for commercial use.
Consult your dealer for details.
6 AC INLET (Europe model only)
Use this inlet to plug in the supplied power cord.
7 DIGITAL INPUT jacks
8 6CH INPUT jacks
See page 18 for connection information.
9 Speaker terminals
See pages 11 and 12 for connection information.
0 IMPEDANCE SELECTOR switch
Use this switch to match the amplifier output to your
speaker impedance (see page 13). Set this unit in the
standby mode before you change the setting of this
switch.
q AC OUTLETS
Use these outlets to supply power to your other A/V
components (see page 19).
Rear Panel
10
SPEAKER SETUP
Speakers to Be Used
This unit has been designed to provide the best sound-
field quality with a 6-speaker system, using left and right
main speakers, left and right rear speakers, and a center
and rear center speakers. If you use different brands of
speakers (with different tonal qualities) in your system,
the tone of a moving human voice and other types of
sound may not shift smoothly. We recommend that you
use speakers from the same manufacturer or speakers
with the same tonal quality.
The main speakers are used for the main source sound
plus the effect sounds. They will probably be the speakers
from your present stereo system. The rear speakers are
used for the effect and surround sounds, and the center
speaker is for the center sounds (dialog, vocals, etc.).
The main speakers should be high-performance models
and have enough power-handling capacity to accept the
maximum output of your audio system. The other
speakers do not have to be equal to the main speakers. For
precise sound localization, however, it is ideal to use the
models of equivalent performance with the main
speakers.
■ Use of a subwoofer expands your
sound field
It is also possible to further expand your system with the
addition of a subwoofer. The use of a subwoofer is
effective not only for reinforcing bass frequencies from
any or all channels, but also for reproducing the LFE
(low-frequency effect) channel with high fidelity when
the Dolby Digital signal or the DTS signal is played back.
The YAMAHA Active Servo Processing Subwoofer
System is ideal for natural and lively bass reproduction.
PREPARATION
Speaker Placement
Refer to the following diagram when you place the
speakers.
■ Main speakers
Place the left and right main speakers an equal distance
from the ideal listening position. The distance of each
speaker from each side of the video monitor should be the
same.
■ Center speaker
Align the front face of the center speaker with the front
face of your video monitor. Place the speaker as close to
the monitor as possible, such as directly over or under the
monitor and centrally between the main speakers.
Note
• If the center speaker is not used, the center channel sound will
be heard from the left and right main speakers. In this case,
“1A CENTER SP” on the SET MENU is set to NONE (see
page 51 for details).
■ Rear speakers
Place these speakers behind your listening position,
facing slightly inwards, nearly 1.8 m (6 feet) above the
floor.
■ Rear center speaker
Place the rear center speaker in the center between the left
and right rear speakers at the same height from the floor
as the rear speakers.
■ Subwoofer
The position of the subwoofer is not so critical, because
low bass sounds are not highly directional. But it is better
to place the subwoofer near the main speakers. Turn it
slightly toward the center of the room to reduce the wall
reflections.
CAUTION
Use magnetically shielded speakers. If this type of
speakers still creates the interference with a monitor,
place the speakers away from the monitor.
Main
speaker (L)
1.8 m (6 feet)
Rear speaker (L)
Rear center
speaker
Rear speaker (R)
Subwoofer
Main speaker (R)Center speaker
11
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SPEAKER SETUP
12
Connecting the Speakers
Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.
CAUTION
• Use speakers with the specified impedance shown on the rear panel of this unit.
• Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could
damage this unit and/or speakers.
If necessary, use the SET MENU to change the speaker mode settings according to the number and size of the speakers
in your configuration after you finish connecting your speakers.
■ Speaker cables
A speaker cord is actually a pair of insulated cables
running side by side. One of the cables is colored or
shaped differently, perhaps with a stripe, groove or ridge.
1 Remove approximately 10 mm (3/8”) of
insulation from each of the speaker cables.
2 Twist the exposed wires of the cable
together to prevent short circuits.
■ Connecting to the SPEAKERS terminals
1 Unscrew the knob.
2 Insert one bare wire into the hole in the side
of each terminal.
3 Tighten the knob to secure the wire.
10 mm (3/8”)
■ MAIN SPEAKERS terminals
One or two speaker systems can be connected to these terminals. If you use only one speaker system, connect it to either
of the MAIN A or B terminals.
■ REAR SPEAKERS terminals
A rear speaker system can be connected to these terminals.
■ CENTER SPEAKER terminals
A center speaker can be connected to these terminals.
■ REAR CENTER SPEAKER terminals
A rear center speaker can be connected to these terminals.
Red: positive (+)
Black: negative (–)
3
1
2
12
SPEAKER SETUP
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
AC OUTLETS
RS-232C
+
+
6ΩMIN. /SPEAKER
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN. /SPEAKER
SWITCHED 100W MAX. TOTAL
COMPONENT VIDEO
PRE OUT/MAIN IN
MAIN OUT
Y
P
R
/C
R
P
B
/C
B
DVD
MONITOR
OUT
DVD
IN
VCR 1
OUT
IN
VCR 2
/DVR
OUT
S VIDEO VIDEO
D-TV
/LD
CBL
/SAT
D-TV
/LD
MAIN IN
REAR (SURROUND)
SUB
WOOFER
CENTER
SPEAKERS
REARCENTER
MAIN
+
+
–
+
–
+
–
–
+
–
REAR
CENTER
(SURROUND)
REAR
CENTER
VIDEO
VIDEOS VIDEO
AUDIO
DIGITAL INPUT
GND
6CH INPUT
CENTER
MAIN
SURROUND
AUDIODIGITAL OUTPUT
MONITOR
OUT
PHONO
CBL
/SAT
CD
D-TV
/LD
DVD
CD-R
CD-R
MD/
TAP E
CD
OPTICAL
COAXIAL
SUB
WOOFER
CD
OUT (REC)
CD-R
IN (PLAY)
OUT (REC)
MD/TAPE
IN (PLAY)
R
L
R
L
R
L
R
L
R
L
R
L
R
L
AB
1
2
3
4
5
6
7
8
3
A
B
4
3
4
1
TUNER
2
1
45 6 7
23
Subwoofer
system
Rear Center
speaker
Main B speaker
Center
speaker
(Europe model)
Right
Rear speaker
Right Left
Main A speaker
Right Left
Left
4
5
3
1
2
7
6
The diagram above shows the speaker layout in the listening room.
■ SUBWOOFER jack
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,
connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or
rear channels are directed to this jack if they are assigned to this jack. (The cut-off frequency of this jack is 90 Hz.) The
LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed if they are
assigned to this jack.
Notes
• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level by using the
remote control of this unit (see ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS on page 61).
• Depending on the settings of “1 SPEAKER SET” and “10 LFE LEVEL” on the SET MENU, some signals may not be output from
the SUBWOOFER jack.
13
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SPEAKER SETUP
AC OUTLETS
+
+
6ΩMIN. /SPEAKER
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN. /SPEAKER
SWITCHED 100W MAX. TOTAL
SET BEFORE POWER ON
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
IMPEDANCE SELECTOR
SET BEFORE POWER ON
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
REAR :
REAR CENTER :
CENTER
:
MAIN A OR B
:
A B :
+
+
6ΩMIN. /SPEAKER
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN. /SPEAKER
IMPEDANCE SELECTOR
Switch
position
Upper
Lower
Speaker
Main
Center
Rear
Center
Rear
Main
Center
Rear
Center
Rear
Impedance level
If you use one set of main speakers, the impedance of
each speaker must be 4 Ω or higher.
If you use two sets of main speakers, the impedance of
each speaker must be 8 Ω or higher.
The impedance must be 4 Ω or higher.
The impedance must be 6 Ω or higher.
The impedance of each speaker must be 6 Ω or higher.
If you use one set of main speakers, the impedance of
each speaker must be 8 Ω or higher.
If you use two sets of main speakers, the impedance of
each speaker must be 16 Ω or higher.
The impedance must be 8 Ω or higher.
The impedance must be 8 Ω or higher.
The impedance of each speaker must be 8 Ω or higher.
IMPEDANCE
SELECTOR
switch
(Europe model)
■ IMPEDANCE SELECTOR switch
WARNING
Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit
may be damaged.
If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR
switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the
standby mode.
Select the left and right position according to the impedance of the speakers in your system. Be sure to move this switch
only when this unit is in the standby mode.
14
CONNECTIONS
Before Connecting Components
CAUTION
Never connect this unit and other components to mains power until all connections between components have been
completed.
• Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some
components require different connection methods and have different jack names. Refer to the operation instructions
for each component to be connected to this unit.
• When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or
changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling
system to all its products.
• After you have completed all connections, check them again to make sure they are correct.
Connecting Video Components
■ About the video jacks
There are three types of video jacks. Video signals input through the VIDEO jacks are the conventional composite video
signals. Video signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals.
The S-video signals achieve high-quality color reproduction. Video signals input through the COMPONENT VIDEO
jacks are separated into luminance (Y) and color difference (P
B
/C
B
, P
R
/C
R
) video signals. The jacks are also separated
into three for each signal. The description of the component video jacks may be different depending on the component
(e.g. Y, C
B
, C
R
/Y, P
B
, P
R
/Y, B-Y, R-Y etc.). Component video signals provide the best quality in picture reproduction.
If your video component has an S-video output or component video output, you can connect it to this unit. Connect the
S-video signal output jack on your video component to the S VIDEO jack or connect the component signal output jacks
on your video component to the COMPONENT VIDEO jacks.
y
• Each type of video jack works independently. Signals input through the composite
video, S-video and component jacks are output through the corresponding composite
video, S-video, and component jacks, respectively.
• You can designate the input for the COMPONENT VIDEO A and B jacks according
to your component by using “7 I/O ASSIGNMENT” on the SET MENU (see pages
56 and 57 for details).
Notes
• Use a commercially available S-video cable when connecting to the S VIDEO jack, and commercially available video cables when
connecting to the COMPONENT VIDEO jacks.
• When you are using the COMPONENT VIDEO jacks, check the details in the owner’s manual that came with the component being
connected.
■ VIDEO AUX jacks (on the front panel)
These jacks are used to connect any video input source
such as a game console and a video camera to this unit.
S VIDEO VIDEO
L AUDIO R OPTICAL
VIDEO AUX
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
OPTICAL OUT
S VIDEO OUT
O
V
L
R
S
Game console or video camera
COMPONENT VIDEO
S VIDEO VIDEO
P
R
/ C
R
P
B
/ C
B
Y
VIDEO jack
(composite)
COMPONENT
VIDEO jacks
S VIDEO
jack
15
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONNECTIONS
DIGITAL INPUT
GND
6CH INPUT
CENTER
MAIN
SURROUND
AUDIODIGITAL OUTPUT
PHONO
CD
CD-R
CD-R
MD/
TAPE
CD
OPTICAL
SUB
WOOFER
CD
OUT (REC)
CD-R
IN (PLAY)
OUT (REC)
MD/TAPE
IN (PLAY)
R
L
1
2
3
4
7
3
4
3
4
1
D-TV
/LD
DVD
5
6
COAXIAL
CBL
/SAT
8
VIDEO
MONITOR
OUT
S VIDEO
DVD
IN
VCR 1
OUT
IN
VCR 2
/DVR
OUT
D-TV
/LD
CBL
/SAT
VIDEOS VIDEO
R
L
VIDEOAUDIO COMPONENT VIDEO
Y
P
R
/C
R
P
B
/C
B
DVD
MONITOR
OUT
D-TV
/LD
A
B
TUNER
2
S VIDEO
OUTPUT
S VIDEO
OUTPUT
S VIDEO
OUTPUT
S VIDEO
INPUT
VIDEO
INPUT
S VIDEO
OUTPUT
AUDIO
OUTPUT
AUDIO
OUTPUT
AUDIO INPUT
AUDIO OUTPUT
COAXIAL
OUTPUT
OPTICAL
OUTPUT
RF
OUTPUT
OPTICAL
OUTPUT
VIDEO
OUTPUT
AUDIO
OUTPUT
VIDEO
OUTPUT
RF
INPUT
VIDEO
OUTPUT
VIDEO
INPUT
COMPONENT
INPUT
COMPONENT
OUTPUT
COMPONENT
OUTPUT
L
R
C
*1
S VIDEO
INPUT
VIDEO
L
R
L
R
V
S
C
O
L
R
S
L
R
O
VIDEO
OUTPUT
V
V
S
S S
V
V
V
S
L
S
R
V
C
O
(Europe model)
LD player
RF
demodulator
*1 If your LD player has an RF
OUTPUT jack, first connect it to
the RF INPUT on an RF
demodulator and then connect
the RF OUTPUT on an RF
demodulator to the COAXIAL
jack on this unit.
indicates S-video cables
indicates video cables
indicates coaxial cables
indicates optical cables
indicates right analog cables
indicates left analog cables
indicates signal direction
Video monitor
VCR 1 or VCR 2/
DVR (digital
video recorder)
Cable TV or
Satellite tuner
DVD player
TV/digital TV or
LD player
16
CONNECTIONS
Connecting Audio Components
■ Connecting to digital jacks
This unit has digital jacks for direct transmission of
digital signals through either coaxial or fiber optic cables.
You can use the digital jacks to input PCM, Dolby Digital
and DTS bitstreams. When you connect components to
both the COAXIAL and OPTICAL jacks, priority is given
to the input signals from the COAXIAL jack. All digital
input jacks are acceptable for 96-kHz sampling digital
signals.
y
• You can designate the input for each digital jacks according to
your component by using “7 I/O ASSIGNMENT” on the SET
MENU (see pages 56 and 57 for details).
Note
• The OPTICAL jacks on this unit conform to the EIA standard.
If you use a fiber optic cable that does not conform to this
standard, this unit may not function properly.
■ Connecting a turntable
PHONO jacks are for connecting a turntable with an MM
or high-output MC cartridge. If you have a turntable with
a low-output MC cartridge, use an in-line boosting
transformer or MC-head amplifier when connecting to
these jacks.
y
• Connect your turntable to the GND terminal to reduce noise in
the signal. However you may hear less noise without the
connection to the GND terminal for some record players.
■ Connecting a CD player
y
• The COAXIAL CD and OPTICAL CD jacks are available for a
CD player which has coaxial or optical digital output jacks.
• When you connect a CD player to both the COAXIAL CD and
OPTICAL CD jacks, priority is given to the input signals from
the COAXIAL CD jack.
■ Connecting an MD recorder, tape
deck or CD recorder
y
• DIGITAL OUTPUT jacks and analog OUT (REC) are
independent. Only digital signals are output from DIGITAL
OUTPUT jacks and analog signals from OUT (REC) jacks.
• When you connect your recording component to both the
analog and digital input and output jacks, the priority is given
to the digital signal.
Notes
• When you connect a recording component to this unit, keep its
power on while using this unit. If the power is off, this unit may
distort the sound from other components.
• When you record from a source component connected to this
unit while this unit is set in the standby mode, the recorded
sound may be distorted. To avoid this problem, turn on this
unit.
17
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONNECTIONS
DIGITAL INPUT
D-TV
/LD
DVD
5
6
COAXIAL
CBL
/SAT
8
VIDEO
MONITOR
OUT
S VIDEO
DVD
IN
VCR 1
OUT
IN
VCR 2
/DVR
OUT
D-TV
/LD
CBL
/SAT
VIDEOS VIDEO
R
L
VIDEOAUDIO COMPONENT VIDEO
Y
P
R
/C
R
P
B
/C
B
DVD
MONITOR
OUT
D-TV
/LD
A
B
MD/
TAPE
2
1
CD-R
OPTICAL
CENTER
MAIN
SURROUND
SUB
WOOFER
PHONO
CD
OUT (REC)
CD-R
IN (PLAY)
3
4
1
OUT (REC)
MD/TAPE
IN (PLAY)
R
L
3
4
AUDIO
6CH INPUT
GND
CD-R
CD
3
4
CD
7
TUNER
2
L
L
R
OUTPUT
GND
L
R
L R
L R
INPUT OUTPUT INPUTOUTPUT
OUTPUT
COAXIAL
OUTPUT
R
L
R
OPTICAL
OUTPUT
OPTICAL
INPUT
OPTICAL
INPUT
OPTICAL
OUTPUT
SUBWOOFER
OUTPUT
CENTER
OUTPUT
MAIN
OUTPUT
SURROUND
OUTPUT
L
R
C
O
O
L R
O
O
DIGITAL OUTPUT
L
R
C
O
(Europe model)
indicates coaxial cables
indicates optical cables
indicates right analog cables
indicates left analog cables
indicates signal direction
External decoder
See page 18
Turntable
CD player
CD recorder
MD recorder or
tape deck
18
CONNECTIONS
Connecting to an External
Amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the PRE OUT/MAIN IN jacks as follows.
Note
• When RCA pin plugs are connected to the PRE OUT/MAIN
IN jacks for output to an external amplifier, it is not necessary
to use the corresponding SPEAKERS terminals.
1 MAIN OUT/IN jacks
MAIN OUT jacks .... Main channel line output jacks.
The signals output through these
jacks are affected by VOLUME,
BASS, TREBLE, and BASS
EXTENSION settings.
MAIN IN jacks ........ Line input to this unit’s Main
channel amplifiers.
When connecting to these jacks, signals input to the
preamplifier of this unit will not be output from the main
amplifier of this unit.
2 REAR CENTER jack
Rear center channel line output jack.
3 CENTER jack
Center channel line output jack.
4 SUBWOOFER jack
When using a subwoofer with built-in amplifier, including
the YAMAHA Active Servo Processing Subwoofer
System, connect the input jack of the subwoofer system
to this jack. Low bass signals distributed from the main,
center and/or rear channels are directed to this jack if they
are assigned to this jack. (The cut-off frequency of this
jack is 90 Hz.) The LFE (low-frequency effect) signals
generated when Dolby Digital or DTS is decoded are also
directed if they are assigned to this jack.
Notes
• Adjust the volume level of the subwoofer with the control on
the subwoofer. It is also possible to adjust the volume level by
using the remote control of this unit (see ADJUSTING THE
LEVEL OF THE EFFECT SPEAKERS on page 61).
• Depending on the settings of “1 SPEAKER SET” and “10 LFE
LEVEL” on the SET MENU, some signals may not be output
from the SUBWOOFER jack.
5 REAR (SURROUND) jacks
Rear channel line output jacks.
PRE OUT/MAIN IN
MAIN OUT MAIN IN
REAR (SURROUND)
SUB
WOOFER
CENTER
REAR
CENTER
R
L
R
L
1 2
3 45
Connecting an External Decoder
This unit is equipped with 6 additional input jacks (left
and right MAIN, CENTER, left and right SURROUND
and SUBWOOFER) for discrete multi-channel input from
an external decoder, sound processor or pre-amplifier.
Connect the output jacks on your external decoder to the
6CH INPUT jacks. Be sure to match the left and right
outputs to the left and right input jacks for the main and
surround channels.
Notes
• When you select 6CH INPUT as the input source, this unit
automatically turns off the digital sound field processor, and
you cannot listen to DSP programs.
• When you select 6CH INPUT as the input source, settings of
“1 SPEAKER SET” on the SET MENU do not apply (except
for 1F MAIN LEVEL).
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/