Yamaha THR30IIA Справочное руководство

THR30IIA Wireless Reference Manual 1

Guitar Amplifier

Contents

Reference Manual

Introduction ...........................................................................2

Main Features ............................................................................. 2

Accessories ................................................................................ 2

Names and Functions ..........................................................3

Control Panel .............................................................................. 3

Rear Panel .................................................................................. 6

Connection ............................................................................7

Connection Example .................................................................. 7

Power ......................................................................................... 8

Connecting to guitar by wireless ................................................. 9

Connecting to a smart device ................................................... 10

Connecting to a computer ........................................................ 12

Troubleshooting .................................................................14

Specifications .....................................................................16

Technical Specifications ........................................................... 16

Power Button LED status list .................................................... 17

Signal Flow Diagrams ............................................................... 18

THR30IIA Wireless Reference Manual 2

Thank you for purchasing the Yamaha THR30IIA Wireless.

This product is an exceptionally versatile and compact guitar amplifier designed for acoustic guitar players.

You can use this product in your home, rehearsal spaces, and other places—virtually anywhere you want it!

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and

convenient functions of the product. We also recommend that you keep this manual for future reference.

Main Features

• Sophisticated guitar amplifier utilizing advanced mic modeling, made possible with Yamaha’s origi-

nal VCM technology.

• Built-in wireless receiver works with the Line 6 Relay G10T wireless transmitter (sold separately) for

wireless use.

• Bluetooth® capability enables playing of music sources and editing of the amp’s sound settings from

a smart device or computer.

• Built‐in rechargeable battery enables use without a power adaptor.

• Yamaha’s original Extended Stereo technology enables an exceptionally wide stereo image, much

wider than the unit’s compact size.

• Stereo Imager enables an even more expansive guitar sound and is also good for accentuating

vocals.

• The audio interface capability enables you to record your guitar with the amp processing to a com-

puter via USB.

• Features a built-in chromatic tuner.

* What is VCM Technology?

An original physical modeling technology developed by Yamaha, VCM Technology reproduces the characteristics of analog

circuitry at the component level to accurately reproduce the sound of the modeled equipment.

Accessories

•Power Adaptor

•Quick Guide

• Safety Instructions Sheet

• Service Offices list

• Cubase AI Download Information

* The LINE 6 wireless transmitters described in this document refer to the Relay G10T and the Relay G10TII

(hereinafter abbreviated as the Relay G10T.)

Introduction

THR30IIA Wireless Reference Manual 3

Control Panel

q [ ] (Power Button) / Power Button LED

This is the unit’s power button.

When the power is ON, the Power Button LED, the lamp corresponding to the selected tone and the Power

Lamp in the speaker cabinet light up.

w LED Display

Indicates individual settings and conditions of the THR30IIA Wireless.

e [TAP/TUNER] button

 Tuner Function

Holding the switch for 1 second engages the tuner function and lights the indicators.

The tuner is calibrated to A4=440Hz. Tune the guitar until the desired pitch appears in the LED display.

When only the circle ( ) in the center of the display is visible, tuning is accurate.

Press the [TAP/TUNER] button again to turn OFF the tuner function*.

* When the tuner function is set to ON, the guitar is muted. The sounds from the [AUX] jack, [USB] jack and Bluetooth are out-

put to the main speaker and [PHONES] jack.

 Tap Tempo Function

When a CHORUS/DELAY or DELAY effect is selected with the [EFFECT] knob !0 control, the tempo of the

delay can be set by tapping (more than twice) on the switch.

 Extended Stereo Setting

Hold the [TAP/TUNER] button for more than five seconds to switch the Extended Stereo* function ON/OFF.

The Extended Stereo function produces a much wider stereo field. This affects the sounds from the [AUX]

jack, [USB] jack and Bluetooth as well as the guitar reverb effect. The Extended Stereo setting (ON/OFF) is

saved when the power is turned OFF.

ON: “#” on LED Display w is off (default setting).

OFF: “#” on LED Display w is lit.

Names and Functions

e t y u i o !0 !1 !2 !3 !4r

THR30IIA Wireless

Pitch is low Pitch is highIn tune

THR30IIA Wireless Reference Manual 4

Names and Functions

r [TONE SELECT] knob

Selects the tone. The lamp for the corresponding tone lights. When the power is turned ON, the most recent

tone is selected.

 To ne L i s t

t [STEREO IMAGER] switch

Selects the Stereo Imager effect, which spreads the guitar sound left and right. Stereo Imager also accentu-

ates the vocal sound in the center with the guitar sound expanding to the left and right. Stereo Imager affects

only the guitar sound from [GUITAR] !5 jack.

[NORMAL]: Sets the guitar sound and vocal sound at the center.

[WIDE]: Spreads the guitar sound to the right and left.

[WIDER]: Spreads the guitar sound further to the right and left.

y [TONE BLEND] knob

Blends the modeled front mic sound of an acoustic electric guitar with the actual pickup sound of the guitar.

(Maximum setting produces the mic sound only. Minimum setting produces the direct pickup sound only.)

u [BASS] knob

Tone adjustment for the guitar’s sound. Turn the knob clockwise to boost the low-range frequencies.

i [MIDDLE] knob

Tone adjustment for the guitar’s sound. Turn the knob clockwise to boost the mid-range frequencies.

o [TREBLE] knob

Tone adjustment for the guitar’s sound. Turn the knob clockwise to boost the high-range frequencies.

Tone Description

FLAT The Flat setting outputs the input sound directly. [TONE BLEND] knob works as a gain function.

NYLON STR Perfect for use with an acoustic-electric classical or nylon string guitar.

TUBE The tube microphone setting gives the acoustic guitar sound a rich, midrange tone.

DYNAMIC The dynamic microphone setting gives the acoustic guitar a tight tone.

CONDENSER The condenser microphone setting gives the acoustic guitar sound a natural, clear tone.

[NORMAL] [WIDE] [WIDER]

THR30IIA Wireless Reference Manual 5

Names and Functions

!0 [EFFECT] knob

Selects the effect type and amount applied to the guitar sound from [GUITAR] !5 jack. Selects one of three dif-

ferent effects: CHORUS, CHORUS/DELAY*

, or DELAY*

. Turn the knob clockwise*

to increase the amount

of each effect.

When CHORUS/DELAY or DELAY is selected, the [TAP/TUNER] button e can be used to set the delay time.

Turn the knob fully counterclockwise to set the effect OFF.

!1 [REVERB] knob

Selects one of two different reverbs: SHORT and LONG.

Turn the knob clockwise to increase the amount of each reverb. Turn the knob fully counterclockwise to set the

effect OFF.

!2 [VOLUME] knob

Adjusts the overall volume of the guitar sound. This knob’s setting has no effect on the signal sent to the [USB]

jack !3. The volume output to the [LINE OUT] [L] [R] jack is constant regardless of the setting of the [VOL-

UME] knob.

!3 [MIC/INST REVERB] knob

Adjusts the reverb amount for audio from the mic or electronic instrument connected to the [MIC/INST] jack !8.

Turn the knob clockwise to increase the amount of reverb.

!4 [MIC/INST VOLUME] knob

Adjusts the volume from the mic or electronic instrument connected to the [MIC/INST] jack !8.

!5 [GUITAR] jack

This is a standard phone jack used to connect* a guitar to the THR30IIA Wireless. The [GUITAR] jack starts

charging the Relay G10T automatically when the Relay G10T is connected.

* The optimal transmission channel is set automatically when the Relay G10T to the [GUITAR] jack has been connected for at

least 10 seconds.

!6 [PHONES] jack

This is a stereo mini phone jack used to connect* stereo headphones to the THR30IIA Wireless.

* Speaker sound is muted when a plug is inserted into the [PHONES] jack.

!7 [AUX] jack

This is a stereo mini phone jack used to connect* an external audio device to the THR30IIA Wireless.

* The signal received at the [AUX] jack is not sent to the [USB] jack @5.

!8 [MIC/INST] jack

For connection* to a microphone or electronic instrument. This jack can be connected to both XLR-type and

phone-type (balanced/unbalanced) plugs.

!9 [GAIN] knob

Adjusts the input signal level of the [MIC/INST] jack.

@0 [USER MEMORY] [1] [2] [3] [4] [5] button

Saves up to five sets of guitar section controller settings (TONE BLEND, BASS, MIDDLE, TREBLE, EFFECT,

REVERB), STEREO IMAGER setting , and a mic/inst section controller setting (MIC/INST REVERB).

Press and hold the [USER MEMORY] button of the corresponding number for saving your settings (for about 2 sec-

onds). The save operation is complete when the memory number for the button being pressed appears in the LED

Display

. Press the desired numbered button (for less than 2 seconds) to recall the saved settings.

THR30IIA Wireless Reference Manual 6

Names and Functions

@1 [Bluetooth] button

Sets the Bluetooth function. Press and hold for three seconds to activate Bluetooth pairing. The LED display

w will flash in green. For further details, refer to the section “Connecting to a smart device” on page 10.

Rear Panel

@2 [LINE OUT] [L] [R] jack

These are standard phone jacks used to output line level audio signals, and are for connection to external

devices handling line level signals. These jacks can be connected to phone-type (balanced/unbalanced)

plugs.

@3 [USB] jack

This jack is used to connect the THR30IIA Wireless to a computer via a USB cable.

@4 [15V] DC IN connector

For connection to the supplied power adaptor.

About the Default Settings

To reset all contents stored in the user memory, switch on the power while holding down [USER MEM-

ORY] buttons [1], [3], and [5].

NOTICE

All contents stored in the user memory will return to factory defaults when the unit is initialized.

Hold down switches [1], [3], and [5].

Switch on the power.

THR30IIA Wireless Reference Manual 7

The THR30IIA Wireless can be used either with a conventional wired connection with an appropriate cable, or

with a wireless connection.

Connection Example

• Make sure that all devices to be connected to the unit by cable are turned off.

• When connecting the unit to an external device, always use an appropriate cable that matches the

jack’s specifications and connect it securely.

Connection

* The illustrations and LCD screens as shown in this manual are for instructional purposes only,

and may appear somewhat different from those on your instrument.

NOTE

If a cable is connected to the INPUT

jack, the wireless guitar receiver can-

not be used.

• Playing music/audio

NOTE

Make sure to adjust the device’s level

appropriately to avoid distortion.

• Wireless tone editing with the iOS/

Android app (THR Remote).

• Wireless control with a third-party

Bluetooth footswitch (via THR

Remote).

Wireless

connection

Audio output from

an audio player or

computer

Computer, tablets and smartphones

USB cable

Power Adaptor

LED display

When connecting a

Bluetooth device,

check LED lighting in

this area.

• Order for turning the power on

THR30IIA Wireless → Mixer → Amp (or powered speaker)

• Order for turning the power off

Amp (or powered speaker) → Mixer → THR30IIA Wireless

External audio devices

Power

outlet

Bluetooth

Dynamic

microphone

THR30IIA Wireless Reference Manual 8

Connection

Precautions for using the USB jack

Make sure to follow the points on the next page when connecting a computer to the THR30IIA Wireless USB

jack, to avoid loss of data by the computer and prevent the THR30IIA Wireless from freezing or shutting down.

NOTICE

• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Be sure to wake the computer from suspended/sleep/standby mode before connecting a computer

to the USB jack.

• Always quit all applications that are running on the computer before connecting or disconnecting

the USB cable and set the volume output on the computer to its minimum level.

• When connecting or disconnecting the USB cable, be sure to set the OUTPUT controls ([VOLUME]

knob and [MIC/INST VOLUME] knob) on the THR30IIA Wireless to their minimum levels.

• Wait at least 6 seconds between connecting or disconnecting the USB cable.

Power

The THR30IIA Wireless can operate on either DC power (via the power adaptor) or with the built‐in rechargeable

battery*.

* When you use the THR30IIA Wireless with the built-in rechargeable battery, the maximum output volume is reduced (

page 16

 When using the power adaptor

Connect* the supplied power cord to the power adapter, and then connect the supplied power adaptor to the

[15V] DC IN jack located on the rear panel of the THR30IIA Wireless. Finally, connect the AC plug to a power

outlet.

* Follow the included Safety Instruction Sheet before making connections.

 Turning the power on and off

Press and hold the [ ] power button on the top of THR30IIA Wireless for one second to turn the power on or

off*. The LED of the power button lights when turning the power button on. The LED of the THR30IIA Wireless

lights in green while charging. Otherwise, it lights in red.

* Follow the included Safety Instruction Sheet before making connections.

 Checking the battery level

Press the [ ] button on top of the THR30IIA Wireless briefly to check the battery level. The remaining battery

capacity is displayed in four levels of 3, 2, 1 and L (Low).

Power adaptor

(supplied)

Power outlet

DC IN jack

DC plug

Supplied power cord

Battery full No battery remaining

THR30IIA Wireless Reference Manual 9

Connection

 Charging the built-in battery

Connect the supplied power adaptor to the DC IN jack located on the rear side of the THR30IIA Wireless. The

LED of the power button lights in green while charging.

* For further details of the Power Button LED status, refer to the Power Button LED status list (page 17).

NOTICE

• When you use the THR30IIA Wireless in an environment of extreme temperatures, charging may

not be possible.

• Charge the built-in rechargeable battery once every six months to maintain the function.

 Charging the Relay G10T

Connect the Relay G10T*

to the [GUITAR] jack located on the top of the THR30IIA Wireless. The built‐in

rechargeable battery starts*

charging automatically. If you have disconnected the Relay G10T from the [GUI-

TAR] jack of the THR30IIA Wireless and want to resume charging, wait for more than two seconds before recon-

necting the device to the [GUITAR] jack.

Refer to the manual of Relay G10T for explanations of the LED display indications on the Relay G10T.

If the supplied power adapter is not connected to the THR30IIA Wireless, charging of the Relay G10T will not start.

NOTICE

• After charging, unplug the Relay G10T from the THR30IIA Wireless.

• When the THR30IIA Wireless is turned off and the power adapter is connected, the Relay G10T is

charged by simply connecting. However, the THR30IIA Wireless is set to stop supplying power to

the Relay G10T when the Relay G10T charging is finished. In this state, leaving the Relay G10T con-

nected to the THR30IIA Wireless may result in depletion of the Relay G10T’s battery power. Turn off

the THR30IIA Wireless’s ECO setting to prevent this.

 Changing the Relay G10T’s ECO setting *

1. Switch on the power of THR30IIA Wireless

2. Switch off the power of THR30IIA Wireless while holding the [TAP/TUNER] button

You can change the ECO setting from the THR Remote.

ECO on and ECO off are toggle. When you change the ECO setting, perform the steps 1 to 2 again.

Since the ECO setting changes to ECO off when charging is started on the Relay G10T, “C” will appear on the LED

display.

Connecting to guitar by wireless

The THR30IIA Wireless can connect with the Relay G10T by wireless. The optimal transmission channel is set

automatically when the Relay G10T to the [GUITAR] jack on the top of the THR30IIA Wireless has been con-

nected for at least 10 seconds. For details on wireless connection, refer to the reference manual.

Switch off the power while

holding the [TAP/TUNER]

button.

THR30IIA Wireless Reference Manual 10

Connection

Connecting to a smart device

By connecting a smart device to the THR30IIA Wireless, you can:

• Play audio files from a smart device via Bluetooth.

• Edit effect and tone controls from a smart device.

 Playing audio files on a smart device via Bluetooth

To play audio from a smart device via Bluetooth, configure Bluetooth on the smart device while in the pairing

mode.

 Setting the THR30IIA Wireless to pairing mode

1. Check that the at the top of the LED DISPLAY is unlit (disconnected).

2. Press and hold the [Bluetooth] button located on the top of the THR30IIA Wireless for three seconds.

3. Check that the at the top of the LED DISPLAY flashes in green (pairing mode).

 Configuring Bluetooth on the smart device

4. Complete the Bluetooth configuration* of the smart device within 3 minutes after entering pairing mode.

* For details on Bluetooth configuration, refer to the manual of your smart device or follow the onscreen instructions.

5. Check that the at the top of the LED DISPLAY lights in green (connected).

Confirm sound output from the THR30IIA Wireless by playing music from the smart device.

NOTE

• When the Bluetooth connection registration remains on both the THR30IIA Wireless and smart

device, they will reconnect automatically when the THR30IIA Wireless power is turned on.

Press the [Bluetooth]

button (disconnect).

5.Check that the

LED is lit in green

(connected).

4. Complete the

Bluetooth

configuration.

3. Check that the LED flashes

in green (pairing mode).

1. Unlit

(disconnected)

2. Press and hold the

[Bluetooth] button for

three seconds (pairing).

Within 3 minutes (while flashing).

Play audio from the smart device.

Lit in green

(connected)

Unlit

(disconnected)

Press the [Bluetooth] button

once when disconnected

(to reconnect).

THR30IIA Wireless Reference Manual 11

Connection

 Editing effects and tone controls on a smart device

Install the THR Remote app to the smart device to allow editing of effects and tone controls on that device.

 Installing THR Remote (Android, iOS)

1. Access the app distribution service on the smart device.

Android devices: Google Play*

iOS devices: App Store

2. Search for the THR Remote app.

3. Download and install the THR Remote app following the onscreen instructions.

 Configuring Bluetooth MIDI

1. Start the THR Remote.

2. Touch the Bluetooth icon on the display.

3. Connect to LE_THRII following the onscreen instructions.

 Starting the THR Remote app

Start the THR Remote app on the smart device.

Press the desired [USER MEMORY] button for 2 seconds to save the settings made on the THR Remote to the

THR30IIA Wireless’s built-in user memory (page 5).

* Google Play and the Google Play logo are trademarks of Google LLC.

THR30IIA Wireless Reference Manual 12

Connection

Connecting to a computer

Connecting a computer to the THR30IIA Wireless makes the following possible:

• Playing back audio files from a computer through the THR30IIA Wireless.

• Recording with Cubase AI.

• Editing amp and effect settings using the THR Remote desktop editor.

 Playing back audio files from a computer through the THR30IIA Wireless

 Configuring and Operating

Select the THR30IIA Wireless as the computer’s audio output setting.

Windows

Control Panel → Sound → “Sound” tab

Mac

System Preferences → Sound → “Output” tab

Connect the computer’s USB connector to the USB connector on the THR30IIA Wireless as shown in the dia-

gram below.

You can play your guitar along with the audio played on the computer.

USB Connection diagram

Play back an

audio file on the

computer.

Guitar sound

audio playback

[USB] jack

THR30IIA Wireless Reference Manual 13

Connection

 Recording with Cubase AI

 Installing Cubase AI

A download access code for Cubase AI music production software is included with the THR30IIA Wireless.

Cubase AI enables you to record, edit, mix and play back audio through your THR30IIA Wireless.

Cubase AI System Requirements

For the latest information, refer to the Steinberg website below.

https://www.steinberg.net/

Installing Cubase AI

Follow the instructions provided in the “Cubase AI Download Information” sheet to download*, install*, and

activate* the software.

* To download, install, and activate Cubase AI, an active Internet connection is required.

* Refer to the Cubase AI Instruction Guide for THR-II, which explains how to set up Cubase AI and how to record the guitar

sound.

https://download.yamaha.com/

 Connecting to the THR30IIA Wireless

Connect the computer’s USB connector to the USB connector on the THR30IIA Wireless as shown in the dia-

gram below. (See the USB Connection diagram on page 12.)

NOTE

• For more information on operating, refer to the Help Menu within Cubase AI (see illustration below).

 Editing effects and tone controls on a computer

 Installing the THR Remote app (Windows, Mac)

1. Access the following website and extract the THR Remote file after downloading.

https://download.yamaha.com/

NOTE

• Check the above website for information on system requirements.

• The THR Remote may be updated without notice. Check the above website for the latest details and updates.

2. Install the THR Remote app to your computer.

 Configuring and Operating after Installing

Connect the computer’s USB connector to the [USB] connector on the THR30IIA Wireless as shown in the

diagram below. (See the USB Connection diagram on page 12.)

Press the desired [USER MEMORY] button for 2 seconds to save the settings made on the THR Remote to

the THR30IIA Wireless’s built-in user memory (page 5).

To [USB] jack on

THR30IIA Wireless

Help

THR30IIA Wireless Reference Manual 14

No power

• Connect the power adaptor properly (see page 8).

• Make sure that the THR30IIA Wireless been

properly charged, when the power adapter is

disconnected (see page 8).

No sound

No guitar sound is output (wired connection)

• Properly connect the guitar to the [GUITAR] jack

(see page 7).

• Make sure that the volume control on the guitar

is turned up properly.

• Make sure that the [VOLUME] knob is not set to

the minimum (see pages 4, 5).

• When the [TONE SELECT] knob is set to FLAT,

make sure that the [TONE BLEND] knob is not

set to the minimum (see page 4).

• Make sure a set of headphones is not con-

nected to the [PHONES] jack; otherwise, sound

will not be output from the speaker on the

THR30IIA Wireless (see page 5).

• Make sure that the COMPRESSOR Level is not

set to 0 on the THR Remote app (see pages 11,

13).

• Set the Tuner function OFF (see page 3).

• Make sure that the cable connecting the guitar

is not damaged.

No guitar sound is output (wireless con-

nection)

• Use the Relay G10T. THR30IIA Wireless cannot

connect to any guitar wireless transmitter other

than the Relay G10T.

• Connect the Relay G10T to the [GUITAR] jack

located on the top of the THR30IIA Wireless for

at least 10 seconds. The appropriate channel is

set automatically.

• Make sure that the volume control on the guitar

is turned up.

• Set the Tuner function OFF (see page 3).

No sound is output from mic or electronic

musical instrument

• Properly connect the mic or electronic musical

instrument to the [MIC/INST] jack (see page 7).

• Make sure that the volume control on the elec-

tronic musical instrument is turned up properly.

• Use only a dynamic microphone; the THR30IIA

Wireless cannot supply phantom power if a con-

denser microphone is connected.

No audio from Bluetooth source

• Confirm the status of the LED display. When the

LED is unlit or flashing in green, the devices are

not connected via Bluetooth (see page 17).

• When the Bluetooth configuration on the smart

device is ON, turn it OFF once and configure

“Playing audio files on a smart device via Blue-

tooth” (see page 10).

• Delete the Bluetooth registration once on the

Bluetooth configuration screen on the smart

device and configure “Playing audio files on a

smart device via Bluetooth” (see page 10).

• Move the smart device and the THR30IIA Wire-

less closer together.

• Turn off the power of the THR30IIA Wireless

and turn on again (see page 8).

• Restart the smart device.

* For details on Bluetooth configuration, refer to the

manual of the smart device.

• Disconnect any other Wi-Fi and Bluetooth

devices. The connection may be disrupted due

to the influence of other nearby Wi-Fi or Blue-

tooth devices.

No audio sound is output from a computer

by USB connection

• Properly connect the USB cable (see page 12).

• Confirm the configuration of the audio output

port on the computer (see page 12).

• Confirm the configuration of the computer on

the computer or that audio is not muted on the

application.

• Make sure the USB cable connecting the

devices is not damaged.

Troubleshooting

THR30IIA Wireless Reference Manual 15

No audio sound is output from an external

device by AUX connection

• Properly connect the cable to the external

device (see page 7).

• Make sure that the volume control on the exter-

nal device is turned up.

• Make sure the cable connecting the devices is

not damaged.

Others

Audio feedback occurs

• If you are using a microphone for vocal input,

make sure to position the microphone away from

and at a sufficient distance from the THR30IIA

Wireless.

Tap Tempo cannot be set

• Select CHORUS/DELAY or DELAY.

An “#” indication appears in the LED dis-

play

• When Extended Stereo is set to OFF, a “#”

appears in the LED display (see page 3).

The THR30IIA Wireless cannot be charged

• Keep the THR30IIA Wireless at room tempera-

ture and do not use it until the built-in recharge-

able battery reaches a suitable temperature. If

charging cannot be performed after a sufficient

time, there may be a problem with the built-in

rechargeable battery. If the problem persists,

consult your Yamaha dealer.

The Relay G10T cannot be charged

• If the Relay G10T has been disconnected from

the [INPUT] jack, connect to the [INPUT] jack on

the THR30IIA Wireless again after 2 seconds.

Volume is low

• Keep the THR30IIA Wireless at room tempera-

ture and do not use it until the built-in recharge-

able battery reaches a suitable temperature.

For safety reasons, the built-in rechargeable

battery is designed to limit the volume when the

built-in rechargeable battery's temperature rises.

The built-in rechargeable battery charge

does not last

• THR30IIA Wireless’s built-in rechargeable bat-

tery may have reached the end of its life. If the

problem persists, consult your Yamaha dealer.

• Charge the battery every six months to maintain

the battery power function.

• The built-in rechargeable battery has a limited life-

time. The capacity decreases gradually with the

number of times of use and the passage of time.

• The lifetime of the built-in rechargeable battery

depends on the storage method, usage and envi-

ronment.

THR30IIA Wireless Reference Manual 16

Technical Specifications

Digital Section

Built-in Tones

CONDENSER*, DYNAMIC*, TUBE*, NYLON STR,

FLAT

* Mic simulation

Built-in Effects

• CHORUS, CHORUS/DELAY, DELAY

• SHORT REVERB, LONG REVERB

• COMPRESSOR

* Only available on THR Remote.

Built-in Chromatic Auto Tuner

Knob/Switch

TONE SELECT, TONE BLEND, BASS, MIDDLE,

TREBLE, EFFECT, REVERB, VOLUME, MIC/INST

REVERB, MIC/INST VOLUME, USER MEMORY but-

ton x 5, TAP/TUNER button, STEREO IMAGER

switch, Bluetooth button

Display

LED × 1

Connections

GUITAR (Standard Monaural Phone Jack, Unbalanced),

MIC/INST (Combo Jack, XLR-type and phone-type,

Balanced/Unbalanced),

LINE OUT (Standard Jack, Balanced/Unbalanced),

PHONES (Stereo Mini Jack),

AUX (Stereo Mini Jack),

USB TYPE B,

DC IN (15V)

A/D Converter

24-bit

D/A Converter

24-bit

Sampling Frequency

48 kHz

Memory Allocations

User Memory: 5

Input Level

GUITAR IN: -10 dBu

AUX IN: -10 dBu

MIC IN: -50 dBu

INST IN: -10 dBu

PHONES Output Level

10 mW

Rated Output

30 W (15 W + 15 W)

Maximum output during built-in recharge-

able battery operation

15 W (7.5W + 7.5W)

Power Source

Power Adaptor or built-in rechargeable battery

Power Adaptor (YNT345-1530)

Built-in rechargeable battery

Power Consumption

22 W

Dimensions (W x H x D)

420 x 195 x 155 mm (16.5” × 7.7” × 6.1”)

Weight

4.4 kg (9 lbs. 11 oz.)

Accessories

• Power Adaptor (YNT345-1530)

• Quick Guide

• Safety Instructions Sheet

• Service Offices list

• Cubase AI Download Information

Bluetooth

Bluetooth Version: Bluetooth Ver. 4.2

Supported Profile: A2DP

Compatible Codec: SBC

RF Output Power: Bluetooth class 2

Maximum Communication Range: 10m (33ft) (without

obstacles)

* The contents of this manual apply to the latest

specifications as of the publishing date. To

obtain the latest manual, access the Yamaha

website then download the manual file. Since

specifications, equipment or separately sold

accessories may not be the same in every locale,

please check with your Yamaha dealer.

Specifications

THR30IIA Wireless Reference Manual 17

Specifications

Power Button LED status list

 When not using the power adaptor

The power is ON

The power is OFF

 When using the power adaptor

Charging

The battery is full and the power is ON

The battery is full and the power is OFF

Red

Unlit

Red

Unlit

Charging error indication

When the power is on Indicates charging error

When the power is off Indicates charging error

If the built-in rechargeable battery has a charging error, immediately turn off the THR30IIA Wireless

power, unplug the power adapter, and consult your Yamaha dealer.

Flashes

(green  red)

Flashes

(green  unlit)

THR30IIA Wireless Reference Manual

Specifications

Signal Flow Diagrams

Extended Stereo

Bluetooth In

USB In

Speakers &

Headphones Out

USB Out

Line Out

Wet

GUITAR

VOLUME

Sync

Compressor

Stereo

Imager

TONE

Simulator

AUX In

Guitar

Reverb

Dry

Output gain

App. control

Chorus

Delay

Mix gain

App. control

Sync

Direct

Switch

Mic In

Guitar In

MIC/INST

VOLUME

Mic

HPF

Mic

3 Band EQ

Mic

Reverb

Extended Stereo is turned off when head-

phones are connected.

Manual Development Department

Published 4/2021 PO-B0

Yamaha THR30IIA Справочное руководство

Похожие модели бренда

Модели других брендов