Yamaha MOXF6/MOXF8 Руководство пользователя

Бренд: Yamaha

Модель: MOXF6/MOXF8

Категория: Синтезаторы

Тип: Руководство пользователя

Это руководство также подходит для

Owner’s Manual

MOXF6/MOXF8 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO

NOT connect this product to any power supply or adapter other than one

described in the manual, on the name plate, or specifically recom-

mended by Yamaha.

WARNING: Do not place this product in a position where anyone

could walk on, trip over, or roll anything over power or connecting cords

of any kind. The use of an extension cord is not recommended! If you

must use an extension cord, the minimum wire size for a 25’ cord (or

less) is 18 AWG. NOTE: The smaller the AWG number, the larger the

current handling capacity. For longer extension cords, consult a local

electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or mod-

ify any of the specifications without notice or obligation to update existing

units.

This product, either alone or in combination with an amplifier and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult an

audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

fixtures that are either supplied with the product or as optional accesso-

ries. Some of these items are designed to be dealer assembled or

installed. Please make sure that benches are stable and any optional fix-

tures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your dealer

before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environ-

mentally friendly. We sincerely believe that our products and the produc-

tion methods used to produce them, meet these goals. In keeping with

both the letter and the spirit of the law, we want you to be aware of the

following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batter-

ies away from children. Dispose of used batteries promptly and as regu-

lated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason

its useful life is considered to be at an end, please observe all local,

state, and federal regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc. If your dealer is unable to assist

you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model num-

ber, serial number, power requirements, etc., are located on this plate.

You should record the model number, serial number, and the date of pur-

chase in the spaces provided below and retain this manual as a perma-

nent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

This product contains a high intensity lamp that contains

a small amount of mercury. Disposal of this material may

be regulated due to environmental considerations.

For disposal information in the United States, refer to the

Electronic Industries Alliance web site:

www.eiae.org

(mercury)* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

MOXF6/MOXF8 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

(weee_eu_en_01)

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products

should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with

your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on

human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal

service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer

and ask for the correct method of disposal.

(standby)

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif.

90620

Telephone : 714-522-9011

Type of Equipment : MUSIC PRODUCTION SYNTHESIZER

Model Name : MOXF6, MOXF8

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

(FCC DoC)

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som

den ar ansluten till vägguttaget, även om själva apparaten har

stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt — også

selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

MOXF6/MOXF8 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 73) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, place on it any containers (such as vases, bottles or

glasses) containing liquids which might spill into any openings. If

any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning

item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. (If you

are using batteries, remove all batteries from the instrument.) Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

•B

efore moving the instrument, remove all connected cables, to prevent

damage to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

Power supply/AC power adaptor

Location

Connections

DMI-5 1/2

MOXF6/MOXF8 Owner’s Manual

• Never insert or drop paper, metallic, or other objects into the gaps

on the panel or keyboard. This could cause physical injury to you or

others, damage to the instrument or other property, or operational

failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display

is off), electricity is still flowing to the instrument at the minimum

level.

When you are not using the instrument for a long time, make sure you

unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

o avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices

below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or

radio may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the

day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• The data in the instrument’s Edit Buffer (memory location for edited data) will be lost when it is turned off. Save your important data to the user

memory, a USB flash memory device or external device such as a computer. Keep in mind that saved data may be lost due to malfunction or

incorrect operation.

• To protect against data loss due to media damage, we recommend that you save your important data onto two USB flash memory devices/external

media.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your

personal use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license

to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical

scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws.

Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• This device is capable of using various types/formats of music data by optimizing them to the proper format music data for use with the device in

advance. As a result, this device may not play them back precisely as their producers or composers originally intended.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on

your instrument.

• Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Handling caution

Yamaha cannot be held responsible for damage caused by

improper use or modifications to the instrument, or data that is

lost or destroyed.

About the latest Firmware Version

Yamaha may from time to time update firmware of the product and the other associated software without notice for improvement. We

recommend that you check our web site for the latest releases and upgrade your firmware of the MOXF6/MOXF8 or the associated

software.

http://download.yamaha.com/

Note that the explanations in this Owner’s Manual apply to the version of firmware when this Owner’s Manual was produced. For details

about additional functions included in later releases, refer to the above website.

DMI-5 2/2

MOXF6/MOXF8 Owner’s Manual

A message from the MOXF6/MOXF8

Development Team

Thank you for purchasing the Yamaha MOXF6/MOXF8 Music Production Synthesizer.

We, as the development team, have designed this instrument

so that players of every genre and level can easily enjoy truly high-quality sounds and

advanced functions in creating and performing music.

SOUND

Extraordinarily high-quality sound for a variety of applications

The MOXF6/MOXF8 draws on the high-quality sound of the famed MOTIF XF, used extensively by artists worldwide,

and is equipped with a wide range of dynamic sounds for use in virtually any music application.

urthermore, in one of the most important advantages of the MOXF, an optional Flash Memory Expansion Board can be installed.

This feature was included in response to many and repeated requests from power users. Now, Sample (audio) data remains on

the board, even when the power is turned off—allowing you to instantly use Waveforms containing Samples when

you turn the power back on, without the need to load them from an external USB storage device.

FUNCTIONS

Instant, smooth translation from inspiration to final music composition

The MOXF6/MOXF8 features a powerful Performance Creator function which lets you combine your favorite Voice with

other Voices and drum parts, and perform with full rhythmic and chordal backing. You can also record your performances

as a Song or Pattern, simply by pressing the [REC] button from Performance mode—and then, after recording,

automatically move to the Song/Pattern mode for further editing, refining and completing the Song or Pattern.

This workflow is exceptionally smooth and transparent, and lets you create music quickly and easily as the inspiration hits.

Seamless music production with Cubase

The MOXF6/MOXF8 were developed giving maximum consideration to integration with the Cubase series DAW software made by

Steinberg. We’ve enhanced and strengthened the remote control function in connection with Cubase,

letting you easily and conveniently control optional parameters on Cubase with the AI KNOB,

or by using control templates compatible with various VST instruments to easily control multiple parameters and

complex operations on software synthesizers directly from your hardware synthesizer keyboard.

DESIGN

Stylish design and professional look

We also designed the stylish exterior to reflect the professional-level sounds and sophisticated features of the MOXF6/MOXF8,

making it an instrument you’ll love to play, and one you’ll feel proud in showing off onstage.

Moreover, its value as a live performance instrument is made even greater by its portability.

We also took particular care in designing the size and external appearance to make it easy to use,

even when combined in a computer music system.

MOXF6/MOXF8 Owner’s Manual

Accessories

•AC adaptor*

• USB cable

• Owner’s Manual (this book)

• Online Manual CD-ROM x 1 (Reference Manual, Synthesizer Parameter Manual, and Data List)

• CUBASE AI DOWNLOAD INFORMATION

* May not be included in your area. Please check with your Yamaha dealer.

Using the MOXF6/MOXF8 Manuals

Your MOXF6/MOXF8 synthesizer comes with four different reference guides—the Owner’s Manual (this book), the Reference

Manual, the Synthesizer Parameter Manual, and the Data List. While the Owner’s Manual is packaged together with the

synthesizer as a hardcopy booklet, this Reference Manual, Synthesizer Parameter Manual, and the Data List are provided as

PDF documents on the bundled CD-ROM.

• Owner’s Manual (this book)

Describes how to set up your MOXF6/MOXF8 and how to perform basic operations.

• Reference Manual (this PDF document)

Describes the internal design of your MOXF6/MOXF8 and the various parameters that can be adjusted and set. It also

describes how to use the instrument in specific applications and provides the following reference materials.

• Category lists for the Voices and Performances

• Setting examples of the Controller Destination

• Functions of Knobs 1 – 8 in Voice mode and Mixing mode

• Song playback types

• Song Track Loop—setting example

• Punch In/Out recording in Song mode

• Pattern playback types

• Pattern Loop recording

• Creating an Arpeggio

• Storing the Mixing settings as a Mixing Template

• Remote control assignments

• File/Folder selection in File mode

• Playing back SMF (Standard MIDI file) data from USB flash memory device

• Formatting a USB flash memory device

• Synthesizer Parameter Manual (PDF document)

This general, cross-product document explains the Voice parameters, effect types, effect parameters, and MIDI

messages that are used for all synthesizers incorporating the Yamaha AWM2 tone generators. Read the Owner’s

Manual and Reference Manual first and then use this parameter manual if necessary to learn more about parameters

and terms that relate to Yamaha synthesizers in general.

• Data List (PDF document)

Provides lists such as the Voice List, Waveform List, Performance List, Effect Type List, Arpeggio Type List, as well as

reference materials such as the MIDI Implementation Chart and Remote Control Function List.

How to use the PDF manuals

The Reference Manual, the Synthesizer Parameter Manual, and the Data List are provided as data documents in PDF format. These

PDF files can be viewed and read on a computer. When using Adobe

Reader

to view a PDF file, you can search for specific

words, print a specific page or link to open a desired section in the manual. The term search and link functions are especially

convenient methods of navigating through a PDF file, and we recommend that you use them. The latest version of Adobe Reader

can be downloaded from the following URL.

http://www.adobe.com/products/reader

MOXF6/MOXF8 Owner’s Manual

MOXF6/MOXF8 Main Features

 MOTIF XF Sound Engine feature

The wide range of dynamic and authentic MOTIF XF waveforms (such as the realistic sounds of acoustic piano,

electric piano, synthesizer, strings, wind instruments, drums) are all included in this instrument. The sophisticated XA

(Expanded Articulation) function has also been included, providing greater performance flexibility and acoustic

realism. It allows you to more effectively recreate realistic sound and natural performance techniques—such as

legato and trills—and provides other unique modes for random and alternate sound changes as you play. Moreover,

the instrument features new Arpeggio types for Drum Voices, as well as the existing MOTIF XF Arpeggio types, plus

an extensive effect system—including VCM (Virtual Circuitry Modeling) Effects, Master Effect, and Master EQ. In a

wide variety of ways, the MOXF6/MOXF8 truly enhances your music performance and creation.

 Easy-to-use user interface

You can select a desired Voice or Performance directly by using the sixteen number buttons. You can also call up

desired Voices or Performances according to the instrument type by using the Category Search function. This

instrument also provides a powerful, easy-to-use Performance Creator function, which lets you quickly and smoothly

create fully realized music, whenever the inspiration strikes you. Use it to easily create new Performances by using

favorite Voices you’ve found in the Voice mode.

 Comprehensive sequencer for creating Songs and Patterns

This instrument features a built-in sequencer which enables you to produce high-quality music, without the need of a

computer or any other devices. The sequencer features both Realtime recording, which records your performance

data as you play it, and Step recording, which is suitable for recording precise, mechanical phrases or other difficult-

to-execute passages. Moreover, you can record the Performance as a Song/Pattern simply by pressing the [REC]

button, and easily edit and refine your song to completion.

 Optional Flash Memory Expansion Module

The MOXF provides the option of installing a Flash Memory Expansion Module (FL512M/FL1024M), allowing you to

internally store Waveforms that include your sampled audio sounds, and keep those Waveforms intact, even when

turning off the power.

 Responsive, expressive keyboard

The MOXF8 features an 88-key GHS keyboard. This feature provides authentic, realistic keyboard response—much

like the playing feel of an acoustic piano—with the lower keys being heavy in touch, the higher keys light, and all the

natural gradations in between. The MOXF6 features a newly developed, 61-key, semi-weighted keyboard. The

keyboard has been designed and adjusted so that you easily and expressively play the rich variety of sounds of the

instrument.

 Master Keyboard function

This convenient function lets you use this instrument as a master keyboard controller (with independent Zones), and

for easily reconfiguring the instrument between Voice/Performance play and Song/Pattern play in live applications.

 Stereo A/D INPUT [L]/[R] jacks

You can also connect various devices, such as microphone, guitar, or audio equipment, to the Input jacks of the

instrument, and have that audio input signal sound as a separate A/D input Part in the Voice/Performance/Song/

Pattern mode. Various parameters such as volume, pan, and effect can be set for this Part, and the sound is output

together with all the other Parts, letting you play and output the sound MOXF6/MOXF8 together with the external

sound. Also, you can create a vocoder sound by using the input signal from these jacks and the internal effect.

 USB Audio/MIDI interface

The USB terminal of the instrument serves as both a MIDI and audio interface—letting you record digitally the

instrument sound and the audio signal from the A/D INPUT [L]/[R] jacks to DAW software on a computer. You can also

output both the instrument sound and the DAW software input signal from the MOXF6/MOXF8.

 Integration with Cubase

The MOXF is specially designed to work seamlessly with Cubase, Steinberg’s full-featured DAW software — giving

you a comprehensive, all-in-one music production system, in which hardware and software are fully integrated.

MOXF6/MOXF8 Owner’s Manual

A message from the MOXF6/MOXF8 Development Team ...6

Accessories ...........................................................................7

Using the MOXF6/MOXF8 Manuals ......................................7

MOXF6/MOXF8 Main Features.............................................8

Control and Functions 10

Top Panel ............................................................................10

Rear Panel...........................................................................16

Setting Up 17

Power supply.......................................................................17

Connecting speakers or headphones..................................17

Powering up the system ......................................................17

Auto Power Off function.......................................................18

Adjusting the volume and the brightness of the display ......18

Starting up ...........................................................................19

Selecting programs..............................................................19

Playing the Demo Songs .....................................................19

Resetting User Memory to the initial factory settings ..........20

Basic Operation 21

Moving the cursor................................................................21

Changing (editing) parameter values ..................................21

Functions and Sub-Functions..............................................21

Inputting a number directly ..................................................21

Naming (inputting characters) .............................................22

Selecting a note type...........................................................22

Note (Key) and Velocity settings .........................................22

Quick Guide 23

Modes..................................................................................23

Basic Instructions ................................................................24

Playing the keyboard in the Voice mode .............................25

Selecting a Preset Voice ...........................................................25

Using the Category Search function ......................................... 26

Grouping your most-used Voices together—

Favorite Category......................................................................26

Using the Arpeggio function ..................................................... 27

Turning the Arpeggio On/Off.............................................. 27

Changing the Arpeggio type..............................................27

Keyboard Octave/Transpose setting ........................................ 27

Changing the tonal qualities of the Voice ................................. 28

Editing a Voice ..........................................................................28

Enhancing the sound with Effects............................................. 29

Changing the Arpeggio Type assignment ................................ 31

Creating a new Performance by using your favorite Voice

(Performance Creator).........................................................31

Layer—Playing different Voices together.................................. 31

Split—Playing two different Voices with your left and

right hands ................................................................................ 32

Drum Assign—Layering a drum Part with the current Voice.....33

Changing the drum pattern (Arpeggio Type)............................33

Playing the keyboard in the Performance Mode..................34

Selecting a Performance........................................................... 34

Changing the timbre of the Voice ............................................. 35

Recording in the Performance mode .................................. 36

Song and Pattern ...................................................................... 36

Recording the melody and Arpeggio playback to the Song .... 36

Recording Arpeggio playback to a Pattern .............................. 37

Connecting a microphone or audio equipment ................... 38

Playing the keyboard along with the sound input from

the A/D INPUT [L]/[R] jacks ...................................................... 38

Playing the keyboard along with Vocoder ................................ 39

Creating an original Song ................................................... 40

Song playback .......................................................................... 41

Creating a Drum part via Step Recording................................. 41

Creating a bass part via Realtime Recording ........................... 43

Creating a synthesizer part by using Arpeggio ........................ 44

Correcting wrong notes............................................................. 45

Completing the Song by editing the Mixing.............................. 45

Storing the created Song .......................................................... 46

Creating an original Pattern................................................ 47

Listening to the Demo Patterns ................................................. 47

Creating a Pattern (Section A) by using Arpeggio.................... 47

Creating another Pattern (Section B) by

using already recorded data..................................................... 48

Creating a Pattern Chain for converting to a Song ................... 49

Connecting external MIDI instruments................................ 51

Using a Connected Computer ............................................ 53

Connecting to a computer ........................................................ 53

Creating a Song with a computer ............................................. 54

Remote-controlling the software from the MOXF6/MOXF8

(Remote mode) ......................................................................... 55

Using the MOXF6/MOXF8 Editor............................................... 57

Using as a Master Keyboard .............................................. 57

Registering the Edited Voice/Performance/Song/Pattern ......... 57

Making settings for use as a master keyboard ......................... 58

Making Global System Settings (Utility Mode).................... 58

Setting the default mode when turning the power on ............... 58

Reversing the LCD status ......................................................... 59

Click (metronome) settings ....................................................... 59

Effect settings applied to the signal input from

the A/D INPUT jack ................................................................... 59

Master Effect/Master EQ settings in the Voice mode................ 59

Transmitting Control Change messages using

the Foot Switch.......................................................................... 59

Saving/Loading Data (File Mode) ....................................... 60

Saving the settings to a USB flash memory device .................. 60

Loading the settings from a USB flash memory device............ 60

Precautions when using the USB [TO DEVICE] terminal .......... 61

Appendix 62

Shift Function List ............................................................... 62

Display Messages............................................................... 63

Troubleshooting .................................................................. 65

Installing Optional Hardware............................................... 70

Available devices...................................................................... 70

Installation locations.................................................................. 70

Installation Precautions ............................................................. 70

Installing Optional Hardware FL512M/FL1024M....................... 71

Removing the Module ............................................................... 72

Specifications...................................................................... 73

Index ................................................................................... 74

Contents

MOXF6/MOXF8 Owner’s Manual

Top Panel

MOXF8

MOXF6

Control and Functions

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 C2 C3

C1 D1 E1 F1 G1 A1 B1 C2 C3

MOXF6/MOXF8 Owner’s Manual

Control and Functions

C4 C5 C6 C7

C4 C5 C6

MOXF6/MOXF8 Owner’s Manual

Control and Functions

Keyboard

The MOXF8 features an 88-key keyboard, while the MOXF6

has 61 keys. All are equipped with a touch response feature,

initial touch. With initial touch, the instrument senses how

strongly or softly you play the keys, and uses that playing

strength to affect the sound in various ways, depending on

the selected Voice.

Pitch Bend wheel

Controls the pitch bend effect. You can also assign other

functions to this controller.

Modulation wheel

Controls the modulation effect. You can also assign other

functions to this controller.

[MASTER VOLUME] slider (page 18)

Adjusts the volume of the overall sound. Move the slider

upwards to raise the output level from the OUTPUT [L/MONO]/

[R] jacks and the [PHONES] jack.

[DAW LEVEL] slider

Adjusts the volume of the audio signal input from the USB

[TO HOST] terminal.

A/D INPUT [GAIN] knob (page 39)

Use this to adjust the input gain of the audio signals at the A/

D INPUT [L]/[R] jacks. Depending on the connected

microphone, you may need to adjust this for optimum level.

The volume level is increased as the knob is rotated to the

right and decreased as it is rotated to the left.

NOTE Depending on the output level of the equipment connected to

the A/D INPUT [L]/[R] jacks, you should change the value of the

Mic/Line parameter in the [F1] GENERAL display of the Utility

mode. When the output level of the connected equipment (such

as a microphone, guitar, bass) is low, set this parameter to “mic.”

When the output level of the connected equipment (such as a

synthesizer keyboard, CD player) is high, set this parameter to

“line.”

A/D INPUT [ON/OFF] button (page 39)

Switches whether or not this instrument accepts the audio

signal input via the A/D INPUT [L]/[R] jack.

[LEVEL] meter button (page 39)

Selects the destination signal controlled via the [LEVEL]

meter, input signal via the A/D INPUT [L]/[R] jacks or output

signal via the OUTPUT [L/MONO]/[R] jack.

[LEVEL] meter (page 39)

Indicates the level of the signal specified via the [LEVEL]

meter switch button.

Knob Function 1 button

Pressing this button changes the functions assigned to Knobs

1 – 4 (on the upper row). The lamp next to the currently active

parameters will light. In the Voice mode, the function of each

knob is applied to the current Voice; in the Performance/Mixing

mode, the function of each knob is applied only to the currently

selected Part or to all Parts (depending on the setting via the

[COMMON] and [PART SELECT] buttons).

NOTE When you press the Knob Function 1 button while holding the

[SHIFT] button, the lamp next to the [TONE 1] button will light

and the TONE 1 parameters are assigned to Knobs 1 – 4.

Knob Function 2 button

Pressing this button changes the functions assigned to

Knobs 5 – 8 (on the lower row). The lamp next to the currently

active parameters will light.

NOTE When you press the Knob Function 2 button while holding the

[SHIFT] button, the lamp next to the [EQ] button will light and the

EQ parameters are assigned to Knobs 5 – 8.

Knobs 1 – 8 (page 28)

These eight highly versatile knobs let you adjust various

aspects or parameters of the current Voice. In this manual,

the knobs on the upper row are called “Knob 1” – “Knob 4”

and the knobs on the lower row are called “Knob 5” – “Knob

8.” Pressing the Knob Function 1 button will change the

functions of Knobs 1 – 4 while pressing the Knob Function 2

button will change the functions of Knobs 5 – 8.

ASSIGNABLE FUNCTION [1]/[2] buttons

Depending on the XA (Expanded Articulation) settings in the

Voice Element Edit mode, you can call up the specific

Element of the selected Voice by pressing each of these

buttons during your keyboard performance. In addition, you

can assign other functions to these buttons.

OCTAVE [-] and [+] buttons (page 27)

Use these buttons to change the note range of the keyboard.

To restore the normal octave setting, press both buttons

simultaneously.

MOXF6/MOXF8 Owner’s Manual

Control and Functions

TRANSPOSE [-] and [+] buttons (page 27)

Use these buttons to raise or lower the pitch of the note in

semitone steps. To restore the normal octave setting, press

both buttons simultaneously.

EFFECT buttons

The extensive effect block of the instrument provides Insertion

Effects (eight sets), System Effects (Reverb and Chorus),

and Master Effects. The effects can be applied to the

keyboard played Voices and to Song/Pattern playback.

When the lamp of the [INSERTION], [SYSTEM] or [MASTER]

button is turned on, the corresponding Effect is available.

NOTE When the Reverb/Chorus of the “SystemFXOn/OffBtn” parameter

is set to off in the [UTILITY]  [F1] GENERAL  [SF1] TG

display, the Reverb/Chorus will not function even if the EFFECT

[SYSTEM] button is turned off.

ARP [ON/OFF] button (page 27)

Press this button to enable or disable playback of the

Arpeggio for each Voice, Performance, Song, or Pattern. If

the Arpeggio Switch of the selected Part is set to off in the

Performance/Song/Pattern mode, however, pressing this

button has no effect.

ARP [EDIT] button (page 31)

Press this button to call up the Arpeggio Edit display of the

Voice/Performance /Song/Pattern mode. When the Arpeggio

Edit display is shown with the [E] (Edit indicator) called up

by editing a parameter, press the ARP [EDIT] button (the

lamp flashes) to call up the Compare status. This restores

the original, unedited setting. In the Compare status, the [E]

indication is replaced by [C]. Press the ARP [EDIT] button

again to exit from the Compare status.

[DAW REMOTE] button (page 55)

Turn on this button to enter the Remote mode. The Remote

mode lets you control DAW software on your computer from

the panel controls of the instrument.

SEQ TRANSPORT

button (page 19)

These buttons control recording and playback of the Song/

Pattern sequence data.

[P] (Top) button

Instantly returns to the beginning of the current Song or

Pattern (i.e., the first beat of the first measure).

[G] (Reverse) button

Press briefly to move back one measure at a time, or

hold to continuously rewind.

[H] (Forward) button

Press briefly to move forward one measure at a time, or

hold to continuously fast-forward.

[REC] (Record) button

Press this to enable recording (Song or Pattern phrase).

(The indicator lights.)

[J] (Stop) button

Press to stop recording or playback.

[F] (Play) button

Press to start playback/recording from the current point

in the Song or Pattern. During recording and playback,

the indicator flashes at the current tempo.

LCD (Liquid Crystal Display)

The backlit LCD indicates the parameters and values related

to the currently selected operation or mode.

[F1] – [F6] (Function) buttons (page 21)

These buttons located directly below the LCD call up the

corresponding functions indicated in the display.

[SF1] – [SF6] (Sub Function) buttons

(page 21)

These buttons located directly below the display call up the

corresponding sub functions indicated in the display. These

buttons can be also used to call up different Arpeggio types

in some displays of the Play mode and Record mode

(page 27). These buttons can be also used as Song Scene

buttons in Song Play/Song Record (see the “Reference

Manual” PDF document).

MOXF6/MOXF8 Owner’s Manual

Control and Functions

[CATEGORY SEARCH] button (page 26)

In the Voice/Performance Part Edit/Song/Pattern mode, turn

this button on to call up the Category Search display of the

Voice assigned to the current Part. In this status, the [A] – [H]

buttons can be used for selecting the Main Category of the

Voice.

In the Performance mode (except for the Part Edit mode), turn

on this button to call up the Category Search display of the

current Performance. In this status, the [A] – [H] buttons can

be used for selecting the Main Category of the Performance.

[FAVORITE] button

Use this convenient function to store all your favorite, often-

used Voices/Performances in a single, easy-to-access

location and call them up by pressing the [FAVORITE] button.

You can add the current program to a favorite category by

simultaneously holding down the [SHIFT] button and

pressing this button. This is one more useful way you can

quickly select the Voices/Performances you need from the

huge number available on the instrument.

[DATA] dial

For editing the currently selected parameter. To increase the

value, turn the dial right (clockwise); to decrease the value,

turn the dial left (counter-clockwise). If a parameter with a

wide value range is selected, you can change the value in

broader strokes by quickly turning the dial.

[INC] button

For increasing the value of the currently selected parameter.

[DEC] button

For decreasing the value of the currently selected parameter.

NOTE

Simultaneously hold down the [SHIFT] button and press the [INC]

button to quickly increase the parameter value in 10-step jumps.

Simultaneously hold down the [SHIFT] button and press the [DEC]

button to quickly decrease the parameter value in 10-step jumps.

Cursor buttons

The cursor buttons move the “cursor” around the display,

highlighting and selecting the various parameters.

[SHIFT] button

Pressing this button along with another button enables you

to execute various commands. For details, refer to the “Shift

Function List” (page 62).

[EXIT] button

he menus and displays of the MOXF6/MOXF8 are organized

according to a hierarchical structure. Press this button to exit

from the current display and return to the previous level in the

hierarchy. Also use it to cancel a Job or a Store operation.

[ENTER] button

Use this button to call up the display of the selected menu.

Also use this button to execute a Job or a Store operation.

[MODE] buttons

These buttons select the MOXF6/MOXF8 operating modes

(e.g., Voice mode).

PERFORMANCE CREATOR (page 31)

This function is for quickly editing/creating a new Performance

based on the current Voice. This would come in handy when

a certain Voice has effect settings that you want to use in

your Performance program.

[LAYER] button

This button is for editing a layer Performance based on

the current Voice. When pressing this button, the

Category Search display appears and you can select the

Voices for use in a layer.

[SPLIT] button

This button is for editing a split Performance based on

the current Voice. When pressing this button, the

Category Search display appears and you can select the

Voices for use in a split.

[DRUM ASSIGN] button

This button is for editing a Performance with a Drum

Voice based on the current Voice. When pressing this

button, the Category Search display appears and you

can select the desired Drum Voice. Also, Arpeggio will

be set to on automatically.

BANK SELECT [DEC]/[INC] buttons

Use these buttons to select the desired Voice or

Performance Bank.

Group [A] – [H] buttons

Use these buttons to select the desired Group of Voices/

Performances. When the [CATEGORY SEARCH] button is

turned on, these buttons can be used to select a category.

When the [QUICK SETUP] button is turned on, these buttons

can be used to select a Quick Setup.

[COMMON] button

Turning this button on enters Common Edit, which lets you

MOXF6/MOXF8 Owner’s Manual

Control and Functions

edit the parameters commonly applied to all Elements, Parts

or Zones in the following modes: Voice Edit, Performance,

Song/Pattern Mixing Edit, Mixing Voice Edit and Master Edit.

[PATTERN SECTION/PERFORMANCE

CONTROL] button

This button is available in the Performance mode, Pattern

mode and Master mode. In the Performance mode, turning on

this button

will assign the following functions to the Number

[1] – [16] buttons.

In the Pattern mode, turning on this button will assign

Sections A – H to the Number [1] – [16] buttons.

In the Master mode, turning on this button lets you use the

Number buttons to switch the Internal Switch/External Switch

on/off for each Zone. For details about this function, see the

“Reference Manual” PDF document.

[TRACK] button

Turning this button on in the Song/Pattern mode enables the

Number [1] – [16] buttons for selecting corresponding Song/

Pattern Tracks. In the Voice mode/Performance mode, this

button lets you use the Number buttons to select the

Keyboard Transmit Channel.

[MUTE] button (page 41)

Turning this button on in Normal Voice Edit and Mixing Voice

Edit enables the Number [9] – [16] buttons for muting Voice

Elements (1 – 8). Turning this button on in the other modes

enables the Number [1] – [16] buttons for muting

Performance Parts (1 – 4), Song Tracks/Parts (1 – 16), and

Pattern Tracks/Parts (1 – 16).

[SOLO] button (page 41)

Turning this button on in Normal Voice Edit and Mixing Voice

Edit enables the Number [9] – [16] buttons for soloing a Voice

Element (1 – 8). Turning this button on in the other modes

enables the Number [1] – [16] buttons for soloing a

Performance Part (1 – 4), a Song Track/Part (1 – 16), and a

Pattern Track/Part (1 – 16).

NOTE The on/off status of buttons – affects the Number [1] – [16]

buttons in different ways, depending on the currently selected

mode. Refer to the table below.

Number [1] – [16] buttons

Use of these buttons differs depending on the on/off status of the [PATTERN SECTION/PERFORMANCE CONTROL], [TRACK],

[MUTE] and [SOLO] buttons.

Functions of the Number [1] – [16] buttons

Number button

Function

[1] – [4] Selecting Performance Parts 1 – 4.

[5] – [8] Setting the Arpeggio Switch to on/off for

Performance Parts 1 – 4.

[9] – [12] Setting the mute status for Performance Parts 1 – 4.

[13] – [16]

Setting the Arpeggio Hold for Performance Parts 1 – 4.

Mode

When the [PATTERN SECTION/

PERFORMANCE CONTROL]

button is turned on:

When the [TRACK] button

is turned on:

When the [MUTE]

button is turned on:

When the [SOLO]

button is turned

on:

When all the

buttons are

turned off:

Voice Play – Keyboard transmit channel

setting

– – Voice selection

Normal Voice

Edit

– Changes the Edit mode from

Common Edit to Element Edit

and Element selection ([1] –[8]).

Element Mute setting

([9] – [16])

Solo Element

selection ([9] – [16])

–

Drum Voice

Edit

– Changes the Edit mode from

Common Edit to Drum Key Edit

–––

Performance

Play

Performance Control ( ) Keyboard transmit channel

setting

Part Mute setting

([1] – [4])

Solo Part selection

([1] – [4])

Performance

selection

Performance

Edit

Performance Control ( ) Performance Part selection

([1] – [4])

Part Mute setting

([1] – [4])

Solo Part selection

([1] – [4])

–

Master Play –

Keyboard transmit channel setting

(when memorizing the Voice mode

or Performance mode to the

current Master) or Song/Pattern

Track selection (when memorizing

the Song mode or Pattern mode to

the current Master)

– – Master program

selection

Master Edit – Changes the Edit mode from

Common Edit to Zone Edit and

Zone selection ([1] – [4])

–––

Song/Pattern

Play

Section selection in the

Pattern mode

Song/Pattern Track selection Song/Pattern Track

Mute setting

Solo Track selection Song/Pattern

selection

Song/Pattern

Mixing

Section selection in the

Pattern mode

Song/Pattern Part selection Song/Pattern Part Mute

setting

Solo Part selection Voice selection of

the current Part

Mixing Voice

Edit

– Element selection ([1] – [8]) Element Mute setting

([9] – [16])

Solo Element

selection ([9] – [16])

–

MOXF6/MOXF8 Owner’s Manual

Control and Functions

Rear Panel

Standby/On switch (page 17)

Press to turn the power On ( ) or Standby ( ).

DC IN connector (page 17)

Connect the supplied power adaptor to this connector.

USB terminals

There are two different types of USB terminals, and the rear

panel of the instrument features both.

The USB [TO HOST] terminal is used to connect this

instrument to the computer via the USB cable and allows you

to transfer MIDI data and audio data between the devices.

Unlike MIDI, USB can handle multiple ports via a single

cable. For information about the Port handled by the MOXF6/

MOXF8, see page 54.

The USB [TO DEVICE] terminal is used to connect this

instrument to a USB flash memory device via the USB cable.

This lets you save data created on this instrument to an

external USB flash memory device and load data from a

USB flash memory device to the instrument. Save/Load

operations can be performed in the File mode (page 60).

NOTE Only USB flash memory device can be recognized by this

instrument. Any other USB storage devices (such as hard disk

drive, CD-ROM drive and USB hub) cannot be used.

NOTE Though the instrument supports the USB 1.1 standard, you can

connect and use a USB 2.0 storage device with the instrument.

However, note that the transfer speed is that of USB 1.1.

MIDI [IN] / [OUT] / [THRU] terminals

MIDI [IN] is for receiving control or performance data from

another MIDI device, such as an external sequencer, letting

you control this instrument from the connected separate

MIDI device.

MIDI [OUT] is for transmitting all control, performance and

playback data from this instrument to another MIDI device,

such as an external sequencer.

MIDI [THRU] is simply for redirecting any received MIDI data

(via MIDI [IN]) to connected devices, allowing convenient

chaining of additional MIDI instruments.

FOOT SWITCH [ASSIGNABLE]/[SUSTAIN]

jacks

For connection of an optional FC3/FC4/FC5 Footswitch to the

[SUSTAIN] jack and a FC4/FC5 Footswitch to the

[ASSIGNABLE] jack. When connected to the [SUSTAIN]

jack, the Footswitch controls sustain. When connected to

[ASSIGNABLE], it can control one of various different

assignable functions.

[FOOT CONTROLLER] jack

For connection of an optional foot controller (FC7, etc.). This

jack lets you continuously control one of various different

assignable functions—such as volume, tone, pitch, or other

aspects of the sound.

OUTPUT [L/MONO] and [R] jacks

Line level audio signals are output via these phone jacks. For

monophonic output, use only the [L/MONO] jack.

[PHONES] (Headphone) jack

This standard stereo phones jack is for connection to a set of

stereo headphones. This jack outputs audio signals identical

to those from the OUTPUT [L/MONO] and [R] jacks

A/D INPUT [L] and [R] jacks

External audio signals can be input via these phone jacks

(mono phone plug).

Various devices such as microphone, guitar, bass, CD player,

synthesizer can be connected to these jacks and their audio

input signal can be sounded as the Audio Part of the Voice,

Performance, Song, or Pattern. In addition, you can use the

special Vocoder feature (

page 39

) by connecting a

microphone

to one of these jacks and inputting your Voice to

the microphone.

Use mono phone plugs. For stereo signals (such as from

audio equipment), use both jacks. For mono signals (such

as from a microphone or guitar), use only one of these jacks

according to the “Mono/Stereo” parameter setting.

NOTE When using these jacks, make sure to confirm the “Mono/Stereo”

parameter setting which can be set in the following displays for

each mode:

• For the Voice mode: the VCE A/D display in the Utility mode

• For the Performance mode: the A/D IN display in Common Edit

• For the Song/Pattern mode: the A/D IN display in Mixing

Common Edit

MOXF6/MOXF8 Owner’s Manual

Power supply

Make connections for the supplied power adaptor (page 73)

in the following order. Before you connect the power adaptor,

make sure that the power of this instrument is set to the

Standby status.

1 Connect the plug of the power adaptor to the DC

IN terminal on the rear panel.

2 Connect the other end of the power adaptor to an

AC outlet.

NOTE Follow this procedure in reverse order when disconnecting the

power adaptor.

WARNING

Use the specified adaptor (page 73). The use of other adaptors may

result in irreparable damage to both the adaptor and the instrument.

CAUTION

• Make sure your MOXF6/MOXF8 is rated for the AC voltage supplied

in the area in which it is to be used (as listed on the rear panel).

Connecting the unit to the wrong AC supply can cause serious

damage to the internal circuitry and may even pose a shock

hazard!

• Even when the power of this instrument is in the Standby status,

electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure

you unplug the power adaptor from the wall AC outlet.

Connecting speakers or

headphones

Since this instrument has no built-in speakers, you will need

to monitor the sound of the instrument by using external

equipment. Connect a set of headphones, powered

speakers, or other playback equipment as illustrated below.

When making connections, be sure that your cables have

the appropriate ratings.

Powering up the system

Make sure the volume settings of this instrument and

external devices such as powered speakers are turned

down to the minimum before turning the power on. When

connecting this instrument to the powered speakers, turn on

the power switch of each device in the following order.

When turning the power on:

First, the MOXF6/MOXF8, then the connected powered

speakers.

When turning the power off:

First, the connected powered speakers, then the MOXF6/

MOXF8.

Please keep in mind that the Standby/On switch is located at

the right end (from the view of the keyboard) on the rear

panel of the MOXF6/MOXF8.

Setting Up

1 DC IN

2 Power adaptor plug

AC outlet

Powered speaker

(Left)

Powered speaker

(Right)

Headphones

OUTPUT L/MONO OUTPUT R

PHONES

MOXF6/MOXF8

Standby/

On switch

DC IN

MOXF6/MOXF8

MOXF6/MOXF8 Owner’s Manual

Setting Up

Auto Power Off function

To prevent unnecessary power consumption, this instrument

features an Auto Power Off function that automatically turns

the power off if the instrument is not operated for a specified

period of time.

 Auto Power Off Setting

The amount of time that elapses before the power is

automatically turned off can be set.

 Disabling Auto Power Off (simple method)

Turn the power on while holding down the lowest key on the

keyboard. A “Auto power off disabled.” indication appears

briefly and Auto Power Off is disabled. The setting is retained

even if the power is turned off.

NOTICE

• Even when the power is turned off, electricity is still flowing to the

instrument at the minimum level. To shut off the electricity

completely, make sure you unplug the power cord from the wall AC

outlet.

• Depending on the instrument status, the power may not turn off

automatically, even after the elapse of the specified period of time.

Always turn off the power manually when the instrument is not in

use.

• When the instrument is not operated for a specified period of time

while connected to an external device such as an amplifier, speaker

or computer, make sure to follow the instructions in the Owner’s

Manual to turn off the power to the instrument and the connected

devices, in order to protect the devices from damage. If you do not

want the power to turn off automatically when a device is

connected, disable Auto Power Off.

• The setting will revert to its default value if not backed up before the

power is turned off.

• When Auto Power Off is set to “off,” the value will be retained even if

the backup data saved on another device is loaded to the

instrument. When Auto Power Off is set to something other than

“off,” the value will be overwritten with loaded data.

NOTE The setting time is approximate.

NOTE To turn the power on after Auto Power Off has been executed,

press the Standby/On switch once to the Standby position, and

then press it again to the On position.

NOTE When the factory settings are restored, the setting time is

changed to the default value (30 min.).

Adjusting the volume and

the brightness of the

display

Adjust the volume levels of this instrument and the connected

amplifier/speaker system.

NOTE

When connecting to a set of powered speakers or PA equipment,

set the MASTER VOLUME to about 70%, then raise the volume of

the powered speakers or PA equipment to the appropriate level.

If the display is not easily visible, press the [INC]/[DEC] button

while holding the [UTILITY] button to adjust for optimum

visibility.

CAUTION

Do not listen with the headphones at high volume for long periods of

time. Doing so may cause hearing loss.

Instructions: [UTILITY]  [F1] GENERAL  [SF6] OTHER

 Set “AutoOff”  [STORE]

Setting Value

(min.):

off (Disables Auto Power Off), 5, 10, 15, 30,

60, 120

Default Setting

(min.):

Adjust the volume with the

MASTER VOLUME slider.

Adjust the display contrast.

Max.

Min.

MOXF6/MOXF8

MOXF6/MOXF8 Owner’s Manual

Setting Up

Starting up

Try playing some of the realistic and dynamic MOXF6/

MOXF8 sounds from the keyboard now. When you turn the

power on, the display below appears.

NOTE

In the default settings, the Master mode is selected. See

page 23

for details about the modes.

NOTE Keep in mind that the example displays shown in this manual are

for instruction purposes only, and may appear somewhat

different from those on your instrument.

In this condition you can play the keyboard and hear the

sounds of the selected program. In the default setting, the

Master mode provides a total of 128 programs each of which

includes the mode (Voice, Performance, Song, Pattern) and

its program number. The top of the Master Play display

indicates the Master program number and the status (Mode,

Bank, Program number and its name) registered to the

current Master program.

NOTE For details about Banks, see pages 25 and 34.

Selecting programs

In the default setting, the Master mode provides a total of 128

programs each of which includes the mode (Voice,

Performance, Song and Pattern) and its program number.

Try out the different Master programs to play various Voices

and Performances. You can change the Master program

number by using the [INC] button, [DEC] button, or [DATA]

dial.

Playing the Demo Songs

The MOXF6/MOXF8 features a variety of Demo Songs,

showcasing its dynamic sound and sophisticated functions.

Here’s how to play them back.

1 Press the [SONG] button to enter the Song Play

mode.

The PLAY display appears.

2 Press the SEQ TRANSPORT [F] (Play) button to

start the Demo Song.

The Song currently shown on the display starts.

NOTE

To adjust the volume level of the Demo Songs, use the

[MASTER VOLUME] slider.

3 Press the SEQ TRANSPORT [J] (Stop) button to

stop the Demo Song.

Select another Demo Song by using the [INC] button

or [DATA] dial.

5 Play the selected Demo Song by performing Steps

2 and 3.

Program name Master program number

Mode Bank Program number

Decreases number Increases number

Decreases

number

Increases

number

Stop button Play button

MOXF6/MOXF8 Owner’s Manual

Setting Up

Resetting User Memory to

the initial factory settings

The original factory settings of this synthesizer’s User

Memory can be restored as follows.

NOTICE

When the factory settings are restored, all the Voice, Performance,

Song, Pattern, and system settings in the Utility mode you created will

be erased. Make sure you are not overwriting any important data. Be

sure to save all important data to your USB flash memory device

before executing this procedure (page 60).

1 Press the [UTILITY] button then the [JOB] button to

call up the Factory Set display.

2 Press the [ENTER] button.

The display prompts you for confirmation. To cancel this

operation, press the [EXIT] button here.

NOTICE

When entering a checkmark to the box of Power On Auto Factory Set

and executing Factory Set, the Factory Set operation will

automatically be executed each time you turn the power on. Keep in

mind that this also means that your original data in Flash ROM will be

erased each time you turn on the power. Therefore, the checkmark of

this box should normally be removed. If you remove the checkmark of

this box and execute Factory Set, the Factory Set operation will not

be executed when turning the power on the next time.

3 Press the [ENTER] button to execute Factory Set.

After Factory Set has been completed, a “Completed”

message appears and operation returns to the original

display.

NOTICE

For Factory Set operations that take longer to process, you will see

the message “Now executing Factory Set…” during processing.

While such a message is shown on the display, never attempt to turn

off the power. Turning the power off in this state results in loss of all

user data and may cause the system to freeze (due to corruption of

data in the Flash ROM). This means that this synthesizer may not be

able to start up properly, even when turning the power on next time.

Страница загружается ...

Yamaha MOXF6/MOXF8 Руководство пользователя

Бренд: Yamaha

Модель: MOXF6/MOXF8

Категория: Синтезаторы

Тип: Руководство пользователя

Это руководство также подходит для

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha MOXF6/MOXF8 User manual
français: Yamaha MOXF6/MOXF8 Manuel utilisateur
italiano: Yamaha MOXF6/MOXF8 Manuale utente
español: Yamaha MOXF6/MOXF8 Manual de usuario
Deutsch: Yamaha MOXF6/MOXF8 Benutzerhandbuch
Nederlands: Yamaha MOXF6/MOXF8 Handleiding
português: Yamaha MOXF6/MOXF8 Manual do usuário
dansk: Yamaha MOXF6/MOXF8 Brugermanual
polski: Yamaha MOXF6/MOXF8 Instrukcja obsługi
čeština: Yamaha MOXF6/MOXF8 Uživatelský manuál
svenska: Yamaha MOXF6/MOXF8 Användarmanual
Türkçe: Yamaha MOXF6/MOXF8 Kullanım kılavuzu
suomi: Yamaha MOXF6/MOXF8 Ohjekirja
română: Yamaha MOXF6/MOXF8 Manual de utilizare

Yamaha MOXF6/MOXF8 Руководство пользователя

Это руководство также подходит для

Yamaha MOXF6/MOXF8 Руководство пользователя

на других языках

Похожие модели бренда