JVC CD Receiver KD-G631 Руководство пользователя

Категория
Мультимедиа-приемники для автомобилей
Тип
Руководство пользователя

Это руководство также подходит для

ENGLISHРУCCKИЙУКРАЇНА
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ
KD-G637
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
Вказівки по встановленню та виконанню підключень наведені у окремій інструкції.
INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
ІНСТРУКЦІЇ
GET0470-001A
[EE]
For canceling the display demonstration, see page 7.
Информацию об отмене демонстрации функций дисплея см. на стр. 7.
Інформацію щодо відміни демонстрації функцій дисплею див. на стор. 7.
В соответствии с Законом Российской Федерации “О защите прав потре бителей” срок службы (годности) данного
товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред
его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем,
в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения
ин струк ции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных
материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.
Дополнительные косметические материалы к данному товару, поставляе мые вместе с ним, могут храниться в
течение двух (2) лет со дня его производства.
Срок службы (годности), кроме срока хранения дополнительных космети ческих материалов, упомянутых
в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного
свидетельства JVC, которое он может получить в соответствии с законом о правах потребителя или других законов,
связанных с ним.
Cover_KD-G637[EE]_1.indd 1Cover_KD-G637[EE]_1.indd 1 11/29/06 11:29:22 AM11/29/06 11:29:22 AM
2
ENGLISH
How to reset your unit
Your preset adjustments will also be erased.
How to forcibly eject a disc
Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the unit while driving, be
sure to look ahead carefully or you may be involved
in a traffic accident.
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
[European Union only]
EN02-05_KD-G637[EE]_1.indd 2EN02-05_KD-G637[EE]_1.indd 2 11/29/06 11:28:02 AM11/29/06 11:28:02 AM
ENGLISH
3
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: External USB memory operations.
: Indicator displayed for the
corresponding operation.
How to use the M MODE button
If you press M MODE, the unit goes into functions mode,
then the number buttons and 5/ buttons work as
different function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
To use these buttons for their original functions
again after pressing M MODE, wait for 5 seconds
without pressing any of these buttons until the
functions mode is cleared or press M MODE again.
Detaching the control panel
Attaching the control panel
CONTENTS
Control panel .................................. 4
Remote controller —
RM-RK50 ........... 5
Getting started ................................ 6
Basic operations ................................................... 6
Radio operations ............................. 7
FM RDS operations ........................... 8
Searching for your favorite FM RDS programme
... 8
Disc / USB memory operations ........... 11
Playing a disc in the unit ..................................... 11
Playing discs in the CD changer ........................... 11
Playing from a USB memory ................................ 11
Sound adjustments .......................... 14
General settings — PSM .................. 15
DAB tuner operations ....................... 18
iPod/D. player operations ................. 19
Other external component operations
... 21
Maintenance ................................... 22
More about this unit ........................ 23
Troubleshooting .............................. 26
Specifications .................................. 29
For safety...
Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
EN02-05_KD-G637[EE]_1.indd 3EN02-05_KD-G637[EE]_1.indd 3 11/29/06 11:28:05 AM11/29/06 11:28:05 AM
4
ENGLISH
Parts identification
Control panel
Display window
1 (standby/on attenuator) button /
Control dial
2 0 (eject) button
3 Loading slot
4 T/P (traffic programme/programme type) button
5 DISP (display) button
6 4 /¢ buttons
7 Display window
8 USB (Universal Serial Bus) input terminal
9 (control panel release) button
p 5 (up) / (down) buttons
q SEL (select) button
w BAND button
e SRC (source) button
r Remote sensor
DO NOT expose the remote sensor to strong light (direct
sunlight or artificial lighting).
t
EQ (equalizer) button
y MO (monaural) button
u SSM (Strong-station Sequential Memory) button
i Number buttons
o RPT (repeat) button
; RND (random) button
a M MODE button
s EQ (equalizer) indicator
d Sound mode (iEQ: intelligent equalizer)
indicators—USER, ROCK, CLASSIC, POPS, HIP HOP,
JAZZ
lights up for the selected item.
f Tr (track) indicator
g Disc information indicators—
TAG (Tag information), (track/file), (folder)
h Playback source indicators—
CH: Lights up only when CD-CH is selected as the
playback source.
DISC: Lights up for the built-in CD player.
j Source display / Time countdown indicator
k Main display
l Tuner reception indicators—MO (monaural),
ST (stereo)
/ LOUD (loudness) indicator
z RDS indicators—AF, REG, TP, PTY
x Playback mode / item indicators—RND (random),
(disc), (folder), RPT (repeat)
EN02-05_KD-G637[EE]_1.indd 4EN02-05_KD-G637[EE]_1.indd 4 11/29/06 11:28:06 AM11/29/06 11:28:06 AM
ENGLISH
5
Remote controller — RM-RK50
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.
Warning:
Do not install any battery other than CR2025 or its
equivalent; otherwise, it may explode.
Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.
Store the battery in a place where children cannot
reach to avoid risk of accident.
To prevent the battery from over-heating,
cracking, or starting a fire:
Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
Do not leave the battery with other metallic
materials.
Do not poke the battery with tweezers or
similar tools.
Wrap the battery with tape and insulate when
throwing away or saving it.
Main elements and features
1 (standby/on/attenuator) button
Turns the power on if pressed briefly or
attenuates the sound when the power is on.
Turns the power off if pressed and held.
2 5 U (up) / D (down) buttons
Changes the FM/AM/DAB bands with 5 U.
Changes the preset stations (or DAB services)
with D .
Changes the folder of the MP3/WMA/USB.
While playing an MP3 disc on an
MP3-compatible CD changer:
Changes the disc if pressed briefly.
Changes the folder if pressed and held.
While listening to an Apple iPod or a JVC
D. player:
Pauses/stops or resumes playback with D .
Enters the main menu with 5 U.
(Now 5 U/D /2 R/F 3 work as the menu
selecting buttons.)*
3
VOL – / VOL + buttons
Adjusts the volume level.
4 SOUND button
Selects the sound mode (iEQ: intelligent
equalizer).
5 SOURCE button
Selects the source.
* 5 U : Returns to the previous menu.
D : Confirms the selection.
Continued on the next page
EN02-05_KD-G637[EE]_1.indd 5EN02-05_KD-G637[EE]_1.indd 5 11/29/06 11:28:06 AM11/29/06 11:28:06 AM
6
ENGLISH
6 2 R (reverse) / F (forward) 3 buttons
Searches for stations (or DAB services) if pressed
briefly.
Searches for DAB ensembles if pressed and held.
Fast-forwards or reverses the track if pressed and
held.
Changes the tracks if pressed briefly.
While listening to an iPod or a D. player (in menu
selecting mode):
Selects an item if pressed briefly. (Then, press
D
to confirm the selection.)
Skips 10 items at a time if pressed and held.
Getting started
Basic operations
~ Turn on the power.
Ÿ
*
1
You cannot select these sources if they are not
ready or not connected.
*
2
“NO USB” appears if USB memory is not
attached.
!
For FM/AM tuner
For DAB tuner
Adjust the volume.
@ Adjust the sound as you want. (See
pages 14 and 15.)
To drop the volume in
a moment (ATT)
To restore the sound, press
the button again.
To turn off the power
Volume level appears.
VOL 20
EN06-15_KD-G637[EE]_1.indd 6EN06-15_KD-G637[EE]_1.indd 6 11/29/06 11:28:14 AM11/29/06 11:28:14 AM
7
ENGLISH
! Start searching for a station.
When a station is received,
searching stops.
To stop searching, press the
same button again.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard to receive
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
88.3
M
Basic settings
See also “General settings — PSM” on
pages 15 – 17.
1
2
1 Canceling the display demonstrations
Select “DEMO,” then “DEMO OFF.”
2 Setting the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the
minute.
Select “24H/12H,” then “24H” (hour) or “12H”
(hour).
3 Finish the procedure.
To check the current clock time while the
power is turned off
Clock time is shown on the
display for about 5 seconds. See
also page 16.
Radio operations
~
Ÿ
Lights up when monaural mode is activated.
MONO
EN06-15_KD-G637[EE]_1.indd 7EN06-15_KD-G637[EE]_1.indd 7 11/29/06 2:43:40 PM11/29/06 2:43:40 PM
8
ENGLISH
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you want to
store into.
2
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
SSM
92.5
Preset number flashes for a while.
P4
Listening to a preset station
1
2 Select the preset station (1 – 6) you want.
To check the current clock time while
listening to an FM (non-RDS) or AM station
• For FM RDS stations, see page 10.
FM RDS operations
What you can do with RDS
RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular programme
signals.
By receiving the RDS data, this unit can do the
following:
Programme Type (PTY) Search (see the following)
TA (Traffic Announcement) and PTY Standby
Receptions (see pages 9 and 16)
Tracing the same programme automatically
—Network-Tracking Reception (see page 10)
Programme Search (see pages 10 and 16)
Searching for your favorite
FM RDS programme
You can tune in to a station broadcasting your favorite
programme by searching for a PTY code.
To store your favorite programme types, see page 9.
~ The last selected PTY code
appears.
Frequency Ô Clock
EN06-15_KD-G637[EE]_1.indd 8EN06-15_KD-G637[EE]_1.indd 8 12/15/06 2:16:24 PM12/15/06 2:16:24 PM
9
ENGLISH
Ÿ Select one of your favorite programme
types.
or
Select one of the PTY codes (see
page 10).
! Start searching for your favorite
programme.
If there is a station broadcasting
a programme of the same PTY
code as you have selected, that
station is tuned in.
Storing your favorite programme
types
You can store six favorite programme types.
Preset programme types in the number buttons
(1 to 6):
1 Select a PTY code (see above).
2 Select the preset number (1 – 6) you want to
store into.
3 Repeat steps 1 and 2 to store other PTY
codes into other preset numbers.
4 Finish the procedure.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from any
source other than AM.
The volume changes to the preset TA volume level if
the
current level is lower than the preset level (see page 16).
To activate TA Standby Reception
The TP (Traffic Programme) indicator
either lights up or flashes.
If the TP indicator lights up, TA Standby Reception is
activated.
If the TP indicator flashes, TA Standby Reception is
not yet activated. (This occurs when you are listening
to an FM station without the RDS signals required for
TA Standby Reception.)
To activate TA Standby Reception, tune in to another
station providing these signals. The TP indicator will
stop flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
Ex.: When “ROCK M” is selected
Continued on the next page
EN06-15_KD-G637[EE]_1.indd 9EN06-15_KD-G637[EE]_1.indd 9 11/29/06 11:28:18 AM11/29/06 11:28:18 AM
10
ENGLISH
PTY Standby Reception
PTY Standby Reception allows the unit to switch
temporarily to your favorite PTY programme from any
source other than AM.
To activate and select your favorite PTY code for
PTY Standby Reception, see page 16.
The PTY indicator either lights up or flashes.
If the PTY indicator lights up, PTY Standby Reception
is activated.
If the PTY indicator flashes, PTY Standby Reception is
not yet activated.
To activate PTY Standby Reception, tune in to another
station providing these signals. The PTY indicator will
stop flashing and remain lit.
To deactivate the PTY Standby Reception, select
“OFF” for the PTY code (see page 16). The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is not
sufficient enough, this unit automatically tunes in to
another FM RDS station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, Network-Tracking
Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-REG” on page 16.
Programme A broadcasting on different frequency areas
(01 – 05)
Automatic station selection—
Programme Search
Usually when you press the number buttons, the preset
station is tuned in.
If the signals from the FM RDS preset station are not
sufficient for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the same
programme as the original preset station is broadcasting.
The unit takes some time to tune in to another
station using programme search.
See also page 16.
To check the current clock time while
listening to an FM RDS station
PTY codes
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA,
CULTURE, SCIENCE, VARIED, POP M (music), ROCK M
(music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY,
NATION M (music), OLDIES, FOLK M (music), DOCUMENT
Station name (PS) = Station
Frequency = Programme type
(PTY) = Clock = (back to the
beginning)
EN06-15_KD-G637[EE]_1.indd 10EN06-15_KD-G637[EE]_1.indd 10 11/29/06 11:28:19 AM11/29/06 11:28:19 AM
11
ENGLISH
Playing from a USB memory
This unit can play MP3/WMA tracks stored in a USB
memory.
All tracks in the USB memory will be played repeatedly
until you change the source.
Removing the USB memory will also stop playback.
Then, press SRC to listen to another playback source.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
If a different USB memory is currently attached,
playback starts from the beginning.
To detach the USB memory, straightly pull it out
from the unit.
USB input terminal
USB memory
Disc / USB memory
operations
Playing a disc in the unit
All tracks will be played repeatedly until you change the
source or eject the disc.
To stop play and eject the disc
• Press SRC to listen to another playback
source.
Playing discs in the CD changer
All discs in the magazine will be played repeatedly until
you change the source.
Ejecting the magazine will also stop playback.
~
* If you have changed the external input setting
to “EXT IN” (see page 17), you cannot select the
CD changer.
Ÿ Select a disc.
For disc number from 01 – 06:
For disc number from 07 – 12:
Continued on the next page
EN06-15_KD-G637[EE]_1.indd 11EN06-15_KD-G637[EE]_1.indd 11 11/29/06 11:28:21 AM11/29/06 11:28:21 AM
12
ENGLISH
To go to the next or previous tracks
To go to the next or previous folders (only for
MP3/WMA/USB)
For MP3 discs:
For WMA discs:
To locate a particular track (for CD) or folder
(for MP3/WMA) directly
To select a number from 01 – 06:
To select a number from 07 – 12:
To use direct folder access on MP3/WMA, it is
required that folders are assigned with 2-digit
numbers at the beginning of their folder names—
01, 02, 03, and so on.
To select a particular track in a
folder (for MP3/WMA):
Cautions:
• Avoid using the USB memory if it might hinder
your safety driving.
• Do not pull out or attach the USB memory
repeatedly while “CHECK” appears on the display.
• Operation and power supply may not work as
intended for some USB memories.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up
to avoid losing the data.
• Some USB memories may not work immediately
after you turn on the power.
About MP3 and WMA tracks
MP3 and WMA “tracks” (words “file” and “track” are
used interchangeably) are recorded in “folders.”
About the CD changer
It is recommended to use a JVC MP3-compatible CD
changer with your unit.
You can also connect MP3-incompatible CD changers.
However, these units are not compatible with MP3
discs.
You cannot use the CH-X99, CH-X100, and KD-MK
series CD changers with this unit.
You cannot play any WMA disc in the CD changer.
Disc text information recorded in the CD Text can be
displayed when a JVC CD Text compatible CD changer
is connected.
For connection, see Installation/Connection Manual
(separate volume).
To fast-forward or reverse the track
EN06-15_KD-G637[EE]_1.indd 12EN06-15_KD-G637[EE]_1.indd 12 11/29/06 11:28:21 AM11/29/06 11:28:21 AM
13
ENGLISH
Changing the display information
While playing an audio CD or a CD
Text
While playing an MP3/WMA*
2
disc or
USB memory
When “TAG DISP” is set to “TAG ON” (see
page 17)
When “TAG DISP” is set to “TAG OFF”
: Elapsed playing time with the current
track number
: Clock with the current track number
*
1
If the current disc is an audio CD, “NO NAME” appears.
*
2
Only for the built-in CD player and external USB
memory.
*
3
If an MP3/WMA file does not have Tag information,
folder name and file name appear. In this case, the
TAG indicator will not light up.
Other main functions
Skipping tracks quickly during play
Only possible on JVC
MP3-compatible CD changer
For MP3/WMA/USB, you can skip tracks within the
same folder.
Ex.: To select track 32 while playing a track whose
number is a single digit (1 to 9)
1
2
Each time you press the button, you can skip 10
tracks.
After the last track, the first track will be selected
and vice versa.
3
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure.
NO EJECT
EN06-15_KD-G637[EE]_1.indd 13EN06-15_KD-G637[EE]_1.indd 13 11/29/06 11:28:22 AM11/29/06 11:28:22 AM
14
ENGLISH
Selecting the playback modes
You can use only one of the following playback modes
at a time.
1
2 Select your desired playback mode.
7 Repeat play
Mode Plays repeatedly
TRK RPT : The current track.
FLDR RPT *
1
: All tracks of the current folder.
DISC RPT *
2
: All tracks of the current disc.
RPT OFF : Cancels.
7 Random play
Mode Plays at random
FLDR RND *
1
: All tracks of the current folder,
then tracks of the next folder and
so on.
DISC RND : All tracks of the current disc or USB
memory.
MAG RND *
2
: All tracks of the inserted discs.
RND OFF : Cancels.
*
1
Only while playing a media (MP3/WMA/USB).
*
2
Only while playing discs in the CD changer.
Sound adjustments
You can select a preset sound mode suitable to the
music genre (iEQ: intelligent equalizer).
1
2
Indication (For)
BAS*
1
MID*
2
TRE*
3
LOUD*
4
USER
(Flat sound)
00 00 00 OFF
ROCK
(Rock or disco music)
+03 00 +02 ON
CLASSIC
(Classical music)
+01 00 +03 OFF
POPS
(Light music)
+02 +01 +02 OFF
HIP HOP
(Funk or rap music)
+04 –02 +01 ON
JAZZ
(Jazz music)
+03 00 +03 OFF
*
1
Bass
*
2
Mid-range
*
3
Treble
*
4
Loudness
Preset values
EN06-15_KD-G637[EE]_f.indd 14EN06-15_KD-G637[EE]_f.indd 14 1/3/07 9:08:33 AM1/3/07 9:08:33 AM
15
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS*
1
(bass), [–06 to +06]
Adjust the bass.
MID*
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE*
1
(treble), [–06 to +06]
Adjust the treble.
FAD*
2
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD*
1
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a well-
balanced sound at low volume level.
VOL (volume), [00 to 30 or 50*
3
]
Adjust the volume.
*
1
When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
Depending on the amplifier gain control setting. (See
page 17 for details.)
Continued on the next page
EN06-15_KD-G637[EE]_1.indd 15EN06-15_KD-G637[EE]_1.indd 15 11/29/06 11:28:24 AM11/29/06 11:28:24 AM
16
ENGLISH
Indications Item
( : Initial)
Selectable settings, [reference page]
DEMO
Display
demonstration
DEMO ON
DEMO OFF
: Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [7].
: Cancels.
CLK DISP *
1
Clock display
ON
OFF
:
Clock time is shown on the display at all times when the power is
turned off
.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [7].
CLOCK H
Hour adjustment
0 – 23 (1 – 12) [Initial: 0 (0:00)], [7].
CLOCK M
Minute adjustment
00 – 59 [Initial: 00 (0:00)], [7].
24H/12H
Time display mode
24H
12H
: See also page 7 for setting.
CLK ADJ *
2
Clock adjustment
AUTO
OFF
: The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
: Cancels.
AF-REG *
2
Alternative frequency/
regionalization
reception
AF
AF REG
OFF
: When the currently received signals become weak, the unit
switches to another station (the programme may differ from the
one currently received), [10].
The AF indicator lights up.
: When the currently received signals become weak, the unit
switches to another station broadcasting the same programme.
The AF and REG indicators light up.
: Cancels (not selectable when “DAB AF“ is set to “AF ON“).
PTY-STBY*
2
PTY standby
OFF, PTY codes : Activates PTY Standby Reception with one of the PTY codes, [10].
TA VOL*
2
Traffic announcement
volume
VOL 00 –
VOL 30 or 50 *
3
[Initial: VOL 15]
P-SEARCH*
2
Programme search
ON
OFF
: Activates Programme Search, [10].
: Cancels.
DAB AF*
4
Alternative frequency
reception
AF ON
AF OFF
: Traces the programme among DAB services and FM RDS stations,
[10, 18].
: Cancels.
EN16-29_KD-G637[EE]_1.indd 16EN16-29_KD-G637[EE]_1.indd 16 11/29/06 11:28:45 AM11/29/06 11:28:45 AM
ENGLISH
17
Indications Item
( : Initial)
Selectable settings, [reference page]
DAB VOL*
4
DAB volume
adjustment
VOL –12
— VOL +12
: [Initial: VOL 00]; You can adjust the volume level of DAB tuner to
match the FM sound level and store it in memory.
DIMMER
Dimmer
AUTO
ON
OFF
: Dims the display when you turn on the headlights.
: Activates dimmer.
: Cancels.
TEL
Telephone muting
MUTING 1/
MUTING 2
OFF
: Select either one which mutes the sounds while using a cellular
phone.
: Cancels.
SCROLL *
5
Scroll
ONCE
AUTO
OFF
: Scrolls the track information once.
:
Repeats scrolling (at 5-second intervals).
: Cancels.
Pressing DISP for more than one second can scroll the display
regardless of the setting.
EXT IN*
6
External input
CHANGER
EXT IN
: To use a JVC CD changer, [11], an Apple iPod or a JVC D. player, [19].
: To use any other external component, [21].
TAG DISP
Tag display
TAG ON
TAG OFF
: Shows the Tag information while playing MP3/WMA tracks, [13].
: Cancels.
AMP GAIN
Amplifier gain
control
LOW PWR
HIGH PWR
: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is
less than 50 W to prevent damaging the speaker.)
: VOL 00 – VOL 50
IF BAND
Intermediate
frequency band
AUTO
WIDE
: Increases the tuner selectivity to reduce interference noises between
close stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “OFF” to
save the car’s battery.
*
2
Only for FM RDS stations.
*
3
Depends on the amplifier gain control.
*
4
Displayed only when DAB tuner is connected.
*
5
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
6
Displayed only when one of the following sources is selected—FM, AM, DAB, CD, or USB.
EN16-29_KD-G637[EE]_f.indd 17EN16-29_KD-G637[EE]_f.indd 17 12/26/06 1:59:55 PM12/26/06 1:59:55 PM
18
ENGLISH
To tune in to an ensemble manually
Start searching for an ensemble, as in step ! on the
left column.
1
2
Select a desired ensemble frequency.
Storing DAB services in memory
You can preset six DAB services (primary) for each band.
1 Select a service you want (see steps ~ to
on the left column).
2 Select the preset number (1 – 6) you want to
store into.
Tuning in to a preset DAB service
1
2 Select the preset DAB service (primary)
number (1 – 6) you want.
If the selected primary service has some secondary
services, pressing the same button again will tune
in to the secondary services.
P4
Preset number flashes for a while.
DAB tuner operations
What is DAB system?
Digital Audio Broadcasting (DAB) can deliver digital
quality sound without any annoying interference
and signal distortion. Furthermore, it can carry text,
pictures, and data. When transmitting, DAB combines
several programmes (called “services”) to form one
“ensemble.” In addition, each “service”—called
“primary service”—can also be divided into its
components (called “secondary service”). A typical
ensemble has six or more programmes (services)
broadcast at the same time.
By connecting the DAB tuner, this unit can do the
following:
Tracing the same programme automatically
—Alternative Frequency Reception (see “DAB AF” on
page 16).
It is recommended to use DAB tuner KT-DB1000
with your unit. If you have another DAB tuner,
consult your JVC IN-CAR ENTERTAINMENT dealer.
Refer also to the Instructions supplied for your DAB
tuner.
~
Ÿ
! Start searching for an ensemble.
When an ensemble is received,
searching stops.
To stop searching, press the
same button again.
Select a service (either primary or
secondary) to listen to.
EN16-29_KD-G637[EE]_1.indd 18EN16-29_KD-G637[EE]_1.indd 18 11/29/06 11:28:49 AM11/29/06 11:28:49 AM
ENGLISH
19
iPod / D. player operations
This unit is ready for operating an Apple iPod or a JVC
D. player from the control panel.
Before operating your iPod or D. player:
Connect either one of the following (separately
purchased) to the CD changer jack on the rear of this
unit.
Interface adapter for iPod—KS-PD100 for
controlling an iPod.
D. player interface adapter—KS-PD500 for
controlling a D. player.
For connection, see Installation/Connection Manual
(separate volume).
For details, refer also to the manual supplied with the
interface adapter.
Preparations:
Make sure “CHANGER” is selected for the external input
setting, see page 17.
~
Ÿ
Playback starts automatically from where it has
been paused*
1
or stopped*
2
previously.
Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme by
activating the Alternative Frequency Reception.
While receiving a DAB service:
When driving in an area where a service cannot be
received, this unit automatically tunes in to another
ensemble or FM RDS station, broadcasting the same
programme.
While receiving an FM RDS station:
When driving in an area where a DAB service is
broadcasting the same programme as the FM RDS
station is broadcasting, this unit automatically tunes
in to the DAB service.
When shipped from the factory, Alternative Frequency
Reception is activated.
To deactivate the Alternative Frequency
Reception, see page 16.
To change the display information while
tuning to an ensemble
Service name = Ensemble name
= Channel number = Frequency
= Clock = (back to the beginning)
Continued on the next page
EN16-29_KD-G637[EE]_1.indd 19EN16-29_KD-G637[EE]_1.indd 19 11/29/06 11:28:50 AM11/29/06 11:28:50 AM
20
ENGLISH
Selecting a track from the menu
1 Enter the main menu.
Now the
5//4 /¢ buttons work as
the menu selecting buttons*.
2 Select the desired menu.
For iPod:
PLAYLIST Ô ARTISTS Ô ALBUMS Ô
SONGS Ô GENRES Ô COMPOSER Ô
(back to the beginning)
For D. player:
PLAYLIST
Ô ARTIST Ô ALBUM Ô
GENRE Ô TRACK Ô (back to the beginning)
3 Confirm the selection.
To move back to the previous
menu, press
5.
If a track is selected, playback starts
automatically.
If the selected item has another layer, you will
enter the layer. Repeat steps 2 and 3 until the
desired track is played.
Holding 4 /¢ can skip 10 items at
a time.
*
The menu selecting mode will be canceled:
If no operations are done for about 5 seconds.
When you confirm the selection of a track.
! Adjust the volume.
Adjust the sound as you want. (See
pages 14 and 15.)
Make sure the equalizer on the iPod or
D. player is deactivated.
To pause*
1
or stop*
2
playback
To resume playback, press
the button again.
To fast-forward or
reverse the track
To go to the next or
previous tracks
*
1
For iPod
*
2
For D. player
EN16-29_KD-G637[EE]_1.indd 20EN16-29_KD-G637[EE]_1.indd 20 11/29/06 11:28:51 AM11/29/06 11:28:51 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86

JVC CD Receiver KD-G631 Руководство пользователя

Категория
Мультимедиа-приемники для автомобилей
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ