Do not forget to close the lid after filling
otherwise the kettle will not
automatically switch off after use.
- Do not fill with less than 0.35
liter of water.
- Do not fill with more than 1.8
liter of water (up to “MAX” indication).
- An automatic safety cut-out
has been fitted for protection against
overheating. It will operate if the kettle
is switched on when containing
insufficient water.
- If the automatic safety cut-out
has operated, switch the kettle off,
disconnect form the power outlet and
allow the kettle to cool down for 5-
10minutes.Then refill with water and
switch on-the kettle will then boil and
cut off as in normal operation.
- The kettle may be switched off
at any time by either pushing the switch
of the kettle to the “up” position or by
switching the power off at the power
outlet.
- To pour water, lift the kettle
from the power base and pour.
CORDLESS KETTLE
- Place the power base on a dry,
flat surface.
- Place the kettle on the power
base.
The electrical connections will be made
automatically as the kettle slides onto
the power base.
- Plug the cord into an earthed
power socket and switch on by
depressing the switch of the kettle to
the “down” position.
- When the water has boiled, the
kettle will switch off automatically. After
allowing the kettle to cool down for 30
seconds, the water can be brought back
to the boil by pushing the switch back to
the “down” position. During the cooling
down time do not force the on/off switch
into the “down” (“ON”) position as this
can damage the operating mechanism.
- Do not remove the kettle from
the power-base without first switching
off.
- The kettle may be switched off
at any time by either pushing the switch
of the kettle to the “up” position or by
switching the power off at the power
outlet.
- To pour water, lift the kettle
from the power base and pour.
HOW TO CARE FOR YOUR KETTLE
- Wipe the exterior of the kettle
with a soft, damp cloth or sponge.
Remove stubborn spots with a cloth
moistened with mild liquid detergent.
Do not use abrasive scouring pads or
powders. Never immerse the kettle in
water or other liquids. Since this kettle
has concealed heating element, is it
important to keep the bottom clean,
between the decalcification you may use
a washing-up brush or sponge.
- From time to time, dependent
on the nature of your water supply, a
limescale deposit is naturally formed
and can be found mostly adhered to the
heating element and reduce the heating
capacity.
The amount of limescale deposited (and
subsequently the need to clean or
descale) largely depends on the water
hardness in your area and the frequency
with which the kettle is used.
DESCALING
Descale the kettle regularly with normal
use at least twice a year.
- Fill the kettle up to the “MAX”
with a mixture of one part acetic acid
and two parts water. Switch on and wait
for the appliance to switch off
automatically.
- Let the mixture remain inside
the kettle overnight.
- Throw the mixture away the
next morning.
- Fill the kettle with clean water
up to〝MAX〞and boil again.
- Throw away this boiled water
to remove any remaining scale and
vinegar.
- Rinse the inside of the kettle
with clean water.
ENVIRONMENTAL TIP
An electronic appliance should, when it
is no longer capable of functioning, be
disposed with least possible
environmental damage. The appliance
should be disposed according to the
local regulations in your municipality, in
most cases you can discharge the
appliance at your local recycling center.
THE WARRANTY DO NOT COVER
- If the above points have not
been observed.
- If the appliance has not been
properly maintained, if force has been
used against it or if it has been
damaged in any other way.
- Errors of faults owing to defects
in the distribution system.
- If the appliance has been
repaired or modified or changed in any
way or by any person not properly
authorized.
- Owing to our constant
development of our products on both
functionality and design we reserve the
right to change the product without
preceding notice.