Sony DSC-HX400 Руководство пользователя

4-530-690-41(1)

DSC-HX400/HX400V

Digital Still Camera / Instruction Manual GB

Цифровой фотоаппарат / Инструкция по эксплуатации

RU

Цифровий фотоапарат / Посібник з експлуатації UA

GB

2

This camera is equipped with a built-in instruction guide.

In-Camera Guide

The camera displays explanations for MENU/Fn (Function) items and the

setting values.

1 Press the MENU button or the Fn (Function) button.

2 Select the desired item, then press the (In-Camera Guide) button.

Shooting Tip

The camera displays shooting tips for the shooting mode selected.

1 Press the (In-Camera Guide) button in shooting mode.

2 Select the desired shooting tip, then press z on the control button.

The shooting tip is displayed.

• You can scroll the screen using v/V and change shooting tips using b/B.

English

Learning more about the camera (“Help Guide”)

“Help Guide” is an on-line manual. Refer to it for in-depth

instructions on the many functions of the camera.

1 Access the Sony support page.

http://www.sony.net/SonyInfo/Support/

2 Select your country or region.

3 Search for the model name of your camera within the

support page.

• Check the model name on the bottom of your camera.

Viewing the Guide

(In-Camera Guide)

MENU

Fn (Function)

GB

3

GB

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the

space provided below. Refer to these numbers whenever you call your Sony dealer

regarding this product.

Model No. DSC-HX400/DSC-HX400V

Serial No. _____________________________

Model No. AC-UB10C/AC-UB10D

Serial No. _____________________________

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

IMPORTANT SAFETY INSTRUCTIONS

-SAVE THESE INSTRUCTIONS

DANGER

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE

INSTRUCTIONS

If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the

proper configuration for the power outlet.

[ Battery pack

If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical

burns. Observe the following cautions.

• Do not disassemble.

• Do not crush and do not expose the battery pack to any shock or force such as

hammering, dropping or stepping on it.

• Do not short circuit and do not allow metal objects to come into contact with the battery

terminals.

• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a

car parked in the sun.

• Do not incinerate or dispose of in fire.

• Do not handle damaged or leaking lithium ion batteries.

WARNING

CAUTION

GB

4

• Be sure to charge the battery pack using a genuine Sony battery charger or a device that

can charge the battery pack.

• Keep the battery pack out of the reach of small children.

• Keep the battery pack dry.

• Replace only with the same or equivalent type recommended by Sony.

• Dispose of used battery packs promptly as described in the instructions.

[ AC Adaptor

Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC

Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while

using the apparatus.

[ RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used

rechargeable batteries to the collection and recycling location nearest

you.

For more information regarding recycling of rechargeable batteries,

call toll free

1-800-822-8837, or visit http://www.call2recycle.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

[ Battery pack

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAN ICES-3 B/NMB-3 B

This equipment complies with FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines

in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.

This equipment has very low levels of RF energy that are deemed to comply without

testing of specific absorption ratio (SAR).

For Customers in the U.S.A. and Canada

GB

5

GB

If you have any questions about this product, you may call:

Sony Customer Information Center

1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

This equipment must not be co-located or operated in conjunction with any other antenna

or transmitter.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual

could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the

limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

For Customers in the U.S.A.

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-HX400V

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.

GB

6

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that

may cause undesired operation of the device.

[ Notice for the customers in the countries applying EU Directives

Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan

For EU product compliance: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany

Hereby, Sony Corporation, declares that this equipment is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC. For details, please

access the following URL:

http://www.compliance.sony.de/

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail),

restart the application or disconnect and connect the communication cable (USB, etc.)

again.

This product has been tested and found compliant with the limits set out in the EMC

regulation for using connection cables shorter than 3 meters (9.8 feet).

The electromagnetic fields at the specific frequencies may influence the picture and sound

of this unit.

For Customers in Canada

For Customers in Europe

GB

7

GB

[ Disposal of waste batteries and electrical and electronic

equipment (applicable in the European Union and other

European countries with separate collection systems)

This symbol on the product, the battery or on the packaging indicates that

the product and the battery shall not be treated as household waste. On

certain batteries this symbol might be used in combination with a

chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are

added if the battery contains more than 0.0005% mercury or 0.004% lead.

By ensuring these products and batteries are disposed of correctly, you

will help prevent potentially negative consequences for the environment and human health

which could otherwise be caused by inappropriate waste handling. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery and the electrical and electronic

equipment will be treated properly, hand over these products at end-of-life to the

applicable collection point for the recycling of electrical and electronic equipment. For all

other batteries, please view the section on how to remove the battery from the product

safely. Hand the battery over to the applicable collection point for the recycling of waste

batteries. For more detailed information about recycling of this product or battery, please

contact your local Civic Office, your household waste disposal service or the shop where

you purchased the product or battery.

The number in parentheses indicates the number of pieces.

• Camera (1)

• Rechargeable Battery Pack NP-BX1 (1)

• Micro USB Cable (1)

• AC Adaptor AC-UB10C/UB10D (1)

• Power Cord (mains lead) (not supplied in the USA and Canada) (1)

• Shoulder Strap (1)

• Lens Cap (1)

• Shoe Cap (1) (Attached on the camera)

• Instruction Manual (this manual) (1)

• Wi-Fi Connection/One-touch (NFC) Guide (1)

This guide explains the functions that require a Wi-Fi connection.

For Customers in Singapore

Checking the supplied items

GB

8

A For shooting: Fn (Function)

button

For viewing: (Send to

Smartphone) button

B CUSTOM (Custom) button

• You can assign a desired function

to the CUSTOM button.

C Shutter button

D For shooting: W/T (zoom) lever

For viewing: (Index) lever/

(Playback zoom) lever

E Self-timer lamp/AF illuminator

F Lens

G Flash

• Press the (Flash pop-up)

button to use the flash. The flash

does not pop up automatically.

• When not using the flash, press it

back into the camera body.

H (Flash pop-up) button

I Hook for Shoulder Strap

J Zoom/Focus switch

K Manual ring

• When the Zoom/Focus switch is

set to AF/ZOOM, turn the

manual ring to perform the zoom

function.

• When the Zoom/Focus switch is

set to MF or DMF, turn the

manual ring to adjust the focus.

A GPS receiver (built-in, DSC-

HX400V only)

B Stereo microphone

C Eye sensor

D Viewfinder

• When you look into the

viewfinder, the viewfinder mode

is activated, and when you move

your face away from the

viewfinder, the viewing mode

returns to the screen mode.

E MOVIE (Movie) button

F (Playback) button

G Control button

H FINDER/MONITOR button

• This button switches whether to

display the image on the screen

or in the viewfinder.

I ON/OFF (Power) button and

Power/Charge lamp

Identifying parts

GB

9

GB

J Mode dial

(Intelligent Auto)/

(Superior Auto)/

(Program Auto)/

(Aperture Priority)/

(Shutter Priority)/

(Manual Exposure)/

1/2 (Memory recall)/

(Movie)/ (iSweep

Panorama)/ (Scene

Selection)

K Control dial

L Wi-Fi sensor (built-in)

M (N Mark)

• Touch the mark when you

connect the camera to a

smartphone equipped with the

NFC function.

• NFC (Near Field

Communication) is an

international standard of the

short-range wireless

communication technology.

N (In-Camera Guide)/

(Delete) button

O MENU button

A Multi interface shoe*

B Diopter-adjustment dial

• Adjust the diopter-adjustment

dial to your eyesight until the

display appears clearly in the

viewfinder.

• When adjusting the diopter level,

point the camera to a bright area

to make it easier to adjust the

diopter level.

C Multi/Micro USB Terminal*

• Supports Micro USB compatible

device.

D Connector cover

E HDMI micro jack

F Speaker

G LCD screen

A Battery/Memory card cover

B Battery insertion slot

C Battery eject lever

D Access lamp

E Memory card slot

F Tripod socket hole

• Use a tripod with a screw less

than 5.5 mm (7/32 inches) long.

Otherwise, you cannot firmly

secure the camera, and damage to

the camera may occur.

GB

10

* For details on compatible accessories

for the multi interface shoe and the

Multi/Micro USB Terminal, visit the

Sony web site, or consult your Sony

dealer or local authorized Sony

service facility. You can also use

accessories that are compatible with

the accessory shoe. Operations with

other manufacturers’ accessories are

not guaranteed.

GB

11

GB

Inserting the battery pack

1

Open the cover.

2

Insert the battery pack.

• While pressing the battery eject lever, insert the battery pack as

illustrated. Make sure that the battery eject lever locks after insertion.

• Closing the cover with the battery inserted incorrectly may damage the

camera.

Battery eject lever

GB

12

Charging the battery pack

1

Connect the camera to the AC Adaptor (supplied),

using the micro USB cable (supplied).

2

Connect the AC Adaptor to the wall outlet (wall socket).

The Power/Charge lamp lights orange, and charging starts.

• Turn off the camera while charging the battery.

• You can charge the battery pack even when it is partially charged.

• When the Power/Charge lamp flashes and charging is not finished,

remove and re-insert the battery pack.

Power cord

(Mains lead)

For customers in the USA and Canada

For customers in countries/

regions other than the USA

and Canada

Power/Charge lamp

Lit: Charging

Off: Charging finished

Flashing:

Charging error or charging paused

temporarily because the camera is not

within the proper temperature range

GB

13

GB

• If the Power/Charge lamp on the camera flashes when the AC Adaptor is

connected to the wall outlet (wall socket), this indicates that charging is

temporarily stopped because the temperature is outside the recommended range.

When the temperature gets back within the appropriate range, the charging

resumes. We recommend charging the battery pack in an ambient temperature of

between 10°C to 30°C (50ºF to 86ºF).

• The battery pack may not be effectively charged if the terminal section of the

battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton

swab to clean the terminal section of the battery.

• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If

malfunctions occur while using the AC Adaptor, disconnect the plug from the wall

outlet (wall socket) immediately to disconnect from the power source.

• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall

socket).

• Be sure to use only genuine Sony brand battery packs, micro USB cable (supplied)

and AC Adaptor (supplied).

x

Charging time (Full charge)

The charging time is approximately 230 minutes using the AC Adaptor

(supplied).

• The above charging time applies when charging a fully depleted battery pack at a

temperature of 25°C (77°F). Charging may take longer depending on conditions of

use and circumstances.

x

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using

a micro USB cable.

Notes

To a USB jack

GB

14

• If you connect the camera to a computer when power is turned on, the battery

is not charged but the camera will be powered by the computer, which allows

you to import images to a computer without worrying about the battery

running out.

• Note the following points when charging via a computer:

– If the camera is connected to a laptop computer that is not connected to a power

source, the laptop battery level decreases. Do not charge for an extended period

of time.

– Do not turn on/off or restart the computer, or wake the computer to resume from

sleep mode when a USB connection has been established between the computer

and the camera. That may cause the camera to malfunction. Before turning on/

off, or restarting the computer or waking the computer from sleep mode,

disconnect the camera and the computer.

– No guarantees are made for charging using a custom-built computer or a

modified computer.

x

Battery life and number of images that can be

recorded and played back

• The above number of images applies when the battery pack is fully charged. The

number of images may decrease depending on the conditions of use.

• The number of images that can be recorded is for shooting under the following

conditions:

– Using a Sony Memory Stick PRO Duo™ (Mark2) media (sold separately).

– The battery pack is used at an ambient temperature of 25°C (77°F).

– [GPS On/Off] is set to [Off] (DSC-HX400V only)

– [Display Quality] is set to [Standard]

Notes

Battery life Number of images

Shooting (still

images)

Screen Approx. 150 min. Approx. 300 images

Viewfinder Approx. 190 min. Approx. 380 images

Typical movie

shooting

Screen Approx. 50 min. —

Viewfinder Approx. 55 min. —

Continuous

movie shooting

Screen Approx. 85 min. —

Viewfinder Approx. 95 min. —

Viewing (still images) Approx. 250 min. Approx. 5000 images

Notes

GB

15

GB

• The number for “Shooting (still images)” is based on the CIPA standard, and is for

shooting under the following conditions:

(CIPA: Camera & Imaging Products Association)

– DISP is set to [Display All Info.].

– Shooting once every 30 seconds.

– The zoom is switched alternately between the W and T ends.

– The flash is used once every two times.

– The power is turned on and off once every ten times.

• The number of minutes for movie shooting is based on the CIPA standard, and is

for shooting under the following conditions:

– [ Record Setting]: 60i 17M(FH)/50i 17M(FH).

– Typical movie shooting: Battery life based on repeatedly starting/stopping

shooting, zooming, turning on/off, etc.

– Continuous movie shooting: Battery life based on non-stop shooting until the

limit (29 minutes) has been reached, and then continued by pressing the MOVIE

button again. Other functions, such as zooming, are not operated.

x

Supplying power

You can use the AC Adaptor AC-UD10 (sold separately) or AC-UD11 (sold

separately) for shooting and playback to supply power when shooting or

playing back images.

• If you shoot or play back images when the camera is connected to the

supplied AC Adaptor, power will not be supplied through the AC Adaptor.

Notes

GB

16

Inserting a memory card (sold separately)

1

Open the cover.

2

Insert the memory card (sold separately).

• With the notched corner facing as illustrated, insert the memory card

until it clicks into place.

3

Close the cover.

Ensure that the notched corner

is faced correctly.

GB

17

GB

x

Memory cards that can be used

• In this manual, the products in the table are collectively referred to as follows:

A: Memory Stick PRO Duo media

B: Memory Stick Micro media

C: SD card

D: microSD memory card

• When using Memory Stick Micro media or microSD memory cards with this

camera, make sure to use with the appropriate adaptor.

x

To remove the memory card/battery pack

Memory card: Push the memory card in once to eject the memory card.

Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.

• Never remove the memory card/battery pack when the access lamp (page 9) is lit.

This may cause damage to data in the memory card.

Memory card For still images For movies

A

Memory Stick XC-HG Duo™

Memory Stick PRO Duo™ (Mark2 only)

Memory Stick PRO-HG Duo™

B Memory Stick Micro™ (M2) (Mark2 only)

C

SD memory card (Class 4 or faster)

SDHC memory card (Class 4 or faster)

SDXC memory card (Class 4 or faster)

D

microSD memory card (Class 4 or faster)

microSDHC memory card (Class 4 or faster)

microSDXC memory card (Class 4 or faster)

Notes

GB

18

Setting the clock

1

Press the ON/OFF (Power) button.

The Date & Time setting is displayed when you turn on the camera for the

first time.

• It may take some time for the power to turn on and allow operation.

2

Check that [Enter] is selected on the screen, then press

z on the control button.

3

Select a desired geographic location by following the

on-screen instructions, then press z.

4

Set [Daylight Savings], [Date/Time] and [Date Format],

then press z.

• When setting [Date/Time], midnight is 12:00 AM, and noon is

12:00 PM.

5

Check that [Enter] is selected, then press z.

Control button

ON/OFF (Power)

Select items: v/V/b/B

Set: z

GB

19

GB

Shooting still images

Shooting movies

• Do not pull up the flash manually. This may cause a malfunction.

• When using the zoom function while shooting a movie, the sound of the camera

operating will be recorded. The sound of the MOVIE button operating may also be

recorded when movie recording is finished.

• The panoramic shooting range may be reduced, depending on the subject or the

way it is shot. Therefore even when [360°] is set for panoramic shooting, the

recorded image may be less than 360 degrees.

Shooting still images/movies

1

Press the shutter button halfway down to focus.

When the image is in focus, a beep sounds and the z indicator lights.

2

Press the shutter button fully down to shoot an image.

1

Press the MOVIE (Movie) button to start recording.

• Use the W/T (zoom) lever to change the zoom ratio.

2

Press the MOVIE button again to stop recording.

Notes

Mode dial

Shutter button

: Intelligent Auto

: Movie

MOVIE

W/T (zoom)

lever

W: zoom out

T: zoom in

GB

20

• For the continuous shooting time of a movie recording, refer to “Number of still

images and recordable time of movies” (page 29). When movie recording is

finished, you can restart recording by pressing the MOVIE button again.

Recording may stop to protect the camera depending on the ambient temperature.

x

Selecting next/previous image

Select an image by pressing B (next)/b (previous) on the control button. Press

z in the center of the control button to view movies.

x

Deleting an image

1 Press the (Delete) button.

2 Select [Delete] with v on the control button, then press z.

x

Returning to shooting images

Press the shutter button halfway down.

Viewing images

1

Press the (Playback) button.

• When images on a memory card recorded with other cameras are played

back on this camera, the registration screen for the data file appears.

(Delete)

Control button

(Playback)

W: zoom out

T: zoom in

Select images: B (next)/b (previous)

or turn the control dial

Set: z

Control dial

Страница загружается...

Sony DSC-HX400 Руководство пользователя

Похожие модели бренда