Yamaha MSR100 Руководство пользователя

POWERED SPEAKER

MSR100

Owner’s Manual

Mode d’emploi

Bedienungsanleitung

Manual de instrucciones

Thank you for choosing the YAMAHA MSR100 pow-

ered speaker system. The MSR100 delivers excep-

tionally high sound quality with smooth, extended

bass response from a compact cabinet. The high-per-

formance internal power ampliﬁer delivers 100

watts, and a mixing function is provided for compati-

bility with the widest possible range of applications.

In order to take maximum advantage of the

MSR100’s features and ensure maximum perfor-

mance and longevity, please read this manual care-

fully before using the MSR100. Keep the manual in a

safe place for future reference.

Contents

Precautions ........................................................... 3

Rear Panel ............................................................. 5

Connection Examples............................................ 6

Speciﬁcations........................................................ 7

General speciﬁcations...................................... 7

Amp. Unit........................................................ 7

Dimensions........................................................... 7

Performance graph ................................................ 7

Block Diagram ...................................................... 7

ENGLISH

FRANÇAISDEUTSCHESPAÑOL

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings.

Install in accordance with the manufacture’s

instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves or other

apparatus (including ampliﬁers) that produce

heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other.

A grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories speciﬁed by

the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

speciﬁed by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualiﬁed service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to

persons.

The exclamation point within an equilat-

eral triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The above warning is located on the

rear of the unit.

ENGLISH

Precautions

WARNING

• Connect this unit’s power cord only to an AC outlet of the

type stated in this Owner’s Manual or as marked on the unit.

Failure to do so is a fire and electrical shock hazard.

• Do not allow water to enter this unit or allow the unit to be-

come wet. Fire or electrical shock may result.

• Do not place heavy objects, including this unit, on top of the

power cord. A damaged power cord is a fire and electrical

shock hazard. In particular, be careful not to place heavy ob-

jects on a power cord covered by a carpet.

• Do not place a container with liquid or small metal objects on

top of this unit. Liquid or metal objects inside this unit are a

fire and electrical shock hazard.

• Do not scratch, bend, twist, pull, or heat the power cord. A

damaged power cord is a fire and electrical shock hazard.

• Do not insert or drop metal or flammable objects into the port

of this unit. Fire or electrical shock may result.

• If lightning begins to occur, turn off the power switch of the

unit as soon as possible, and unplug the power cable plug

from the electrical outlet.

• If there is a possibility of lightning, do not touch the power

cable plug if it is still connected. Doing so may be an electri-

cal shock hazard.

• Do not modify the unit. Doing so is a fire and electrical shock

hazard.

• Do not remove the unit’s cover. You could receive an electri-

cal shock. If you think internal inspection, maintenance, or

repair is necessary, contact your dealer.

• Use only the included power cord for this unit. Using other

types may be a fire and electrical shock hazard.

• If the power cord is damaged (i.e., cut or a bare wire is ex-

posed), ask your dealer for a replacement. Using the unit with

a damaged power cord is a fire and electrical shock hazard.

• If you notice any abnormality, such as smoke, odor, or noise,

or if a foreign object or liquid gets inside the unit, turn it off

immediately. Remove the power cord from the AC outlet.

Consult your dealer for repair. Using the unit in this condition

is a fire and electrical shock hazard.

• Should this unit be dropped or the cabinet be damaged, turn the

power switch off, remove the power plug from the AC outlet,

and contact your dealer. If you continue using the unit without

heeding this instruction, fire or electrical shock may result.

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

GREEN-AND-YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals in

your plug, proceed as follows:

The wire which is coloured GREEN and YELLOW must be

connected to the terminal in the plug which is marked by the letter E

or by the safety earth symbol or coloured GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal

which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

* This applies only to products distributed by YAMAHA KEMBLE

MUSIC (U.K.) LTD.

Installation

Operation

In case an abnormality occurs during operation

ENGLISH

CAUTION

• Keep this unit away from the following locations:

- Locations exposed to oil splashes or steam, such as near

cooking stoves, humidifiers, etc.

- Unstable surfaces, such as a wobbly table or slope.

- Locations exposed to excessive heat, such as inside a car

with all the windows closed, or places that receive direct

sunlight.

- Locations subject to excessive humidity or dust accumula-

tion.

• Do not place the power cord close to a heater. It may melt,

causing fire or electrical shock.

• Hold the power cord plug when disconnecting it from an AC

outlet. Never pull the cord. A damaged power cord is a poten-

tial fire and electrical shock hazard.

• Do not touch the power plug with wet hands. Doing so is a po-

tential electrical shock hazard.

• This unit has ventilation holes at the rear to prevent the inter-

nal temperature rising too high. Do not block them. Blocked

ventilation holes are a fire hazard.

In particular, do not

place the unit on its side or upside down,

place the unit in any poorly-ventilated location such as a

bookcase or closet (other than on the dedicated rack),

cover the unit with a table cloth or place it on a carpet or

bed.

• To relocate the unit, turn the power switch off, remove the

power plug from the AC outlet, and remove all connecting ca-

bles. Damaged cables may cause fire or electrical shock.

• Allow enough free space around the unit for normal ventila-

tion. This should be: 30 cm at the sides, 30 cm behind, and 30

cm above. Open a ventilation hole. If the airflow is not ade-

quate, the unit will heat up inside and may cause a fire.

• Turn off all musical instruments, audio equipment, and

speakers when connecting to this unit. Use the correct con-

necting cables and connect as specified.

• Always lower the volume control to minimum before turning

on the power to this unit. A sudden blast of sound may dam-

age your hearing.

• Do not output distorted sounds for long periods of time, as

this will cause the speaker to heat up, leading to a fire hazard.

• Do not raise the volume of speakers to a level that makes you

feel uncomfortable. Listening to loud music for long periods

can damage your hearing.

• If you know you will not use this unit for a long period of time,

such as when going on vacation, remove the power plug from

the AC outlet. Leaving it connected is a potential fire hazard.

• To prevent electrical shock when cleaning the unit, remove

the power plug from the AC outlet.

PRECAUTIONS – FOR CORRECT OPERATION –

• XLR-type connectors are wired as follows: pin 1: ground, pin

2: hot (+), and pin 3: cold (–).

• This speaker system is not magnetically shielded. If a nearby

monitor exhibits any distortion or unnatural color shift, move

the speaker further away from the monitor.

• Using a cell phone (mobile telephone) near this unit may induce

noise. If noise occurs, use the telephone away from the unit.

Installation Operation

Maintenance

Connector pin assignments

Installation

Influence on cell phone usage

ENGLISH

Rear Panel

1 POWER Switch

Turns power to the MSR100 on and off. When the

power is turned on the POWER indicator (J)

will light green.

2 INPUT1 Connector

This dual-mode input connector is a balanced

XLR-3-31 type.

The INPUT1 connector can be set for two types of

input: when the sensitivity switch (C) is set to

MIC microphone-level signals can be connected

directly to the input; when the sensitivity switch

nals such as those from a preampliﬁer or mixer.

3 Sensitivity Switch

Use this switch to set the sensitivity of the

INPUT1 connector to match MIC (microphone-

level) or LINE (line-level) input signals.

4 INPUT2 and INPUT3 Connectors

The INPUT2 and INPUT3 connectors are unbal-

anced phone jacks for direct connection of line-

level audio signals and musical instruments.

5 LEVEL Controls

Adjust the level of the signals received at the

INPUT1, INPUT2, and INPUT3 connectors (2,

4).

6 EQ Controls

HIGH: The HIGH control adjusts the output level at

10 kHz over a ±6 dB range. Rotate clockwise to

boost or counterclockwise to cut.

LOW: The LOW control adjusts the output level at

60 Hz over a ±3 dB range. Rotate clockwise to

boost or counterclockwise to cut.

7 LINK OUT Connector

This is a “direct output“ connector that outputs a

mix of the signals received at the INPUT1,

INPUT2 and INPUT3 connectors (2, 4).

8 MASTER LEVEL Control

Adjusts the overall output level.

9 CLIP Indicator

The CLIP indicator will light red if excessively

high signal levels cause ampliﬁer clipping. If this

occurs, reduce the level of LEVEL controls (5) or

MASTER LEVEL controls (8).

J POWER Indicator

Light green when the POWER switch (A) is

turned on.

K AC IN Connector

Connect the supplied power cord here.

ENGLISH

Connection Examples

Connecting to a mixer

LINE OUT L R

Mixer

Keyboad

CD player or Tape deck

Microphone

Connecting a microphone

and other sources directly

LINE OUT

Daisy chain

Mixer

ENGLISH

Speciﬁcations

General speciﬁcations

Type

2way Bass Reﬂex Powered Speaker

Speaker Unit

LF: 200 mm Cone

HF: 25.4 mm Compression Driver

Frequency Range ..................55 Hz—20 kHz (–10 dB)

Cross Over Frequency...........4 kHz

Maximum Output Level........112 dB (1 m)

Dimension (W×H×D)............275 × 455.5 × 255 mm

Weight..................................11 kg

Color ....................................Black (Approximate Munsell

Value 5 PB2/1)

Accessories...........................Power supply cord 2.5 m (AC

Inlet type)

Option..................................BWS50-190/260/320,

BCS251, BBS251

Amp. Unit

Max Power ...........................100W at 1 kHz, THD=1%,

RL=6Ω

Input Sensitivity ....................INPUT 1: –50 dB* (MIC),

+4 dB* (LINE)

INPUT 2, 3: –10 dB*

Intput Impedance..................INPUT 1, 2, 3: 10 kΩ

Output Sensitivity .................LINK OUT: –10 dB*

Output Impedance................LINK OUT: 10 kΩ

Controls

LEVEL Control.................INPUT 1, 2, 3, MASTER

EQ Control......................LOW: ±3 dB at 60 Hz

HIGH: ±6 dB at 10 kHz

POWER Switch ...............ON/OFF

Connectors

INPUT 1..........................XLR-3-31 (balanced)

INPUT 2, 3......................Phone (unbalanced

LINK OUT.......................Phone (unbalanced

Indicator

POWER Indicator............Green LED

CLIP Indicator .................Red LED

Power Requirement

USA and Canada.............AC 120 V, 60 Hz

Europe ............................AC 230 V, 50 Hz

Australia..........................AC 240 V, 50 Hz

Korea

..................................A

C 220 V, 60 Hz

Power Consumption .............70 W

* 0 dB=0.775 V

Speciﬁcations and descriptions in this owner’s manual are

for information purposes only. Yamaha Corp. reserves the

right to change or modify products or speciﬁcations at any

time without prior notice. Since speciﬁcations, equipment

or options may not be the same in every locale, please

check with your Yamaha dealer.

For European Model

Purchaser/User Information speciﬁed in EN55103-1 and

EN55103-2.

Inrush Current: 10 A

Conformed Environment: E1, E2, E3 and E4

Dimensions

Performance Graph

Block Diagram

10k1k100

FREQUENCY (Hz)

RESPONSE (dB)

-40

-30

-20

-10

+10

ENGLISH

MEMO

Yamaha Manual Library

http://www2.yamaha.co.jp/manual/english/

M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

209AP-01A0

Printed in China

Yamaha MSR100 Руководство пользователя

Похожие модели бренда