Sony KV-SR29 Руководство пользователя

KV-SR29

2-548-137-11 (1)

M99K

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Инструкция по эксплуатации

• Перед работой с устройством внимательно прочтайте инструкцию

и сохраните её для дальнейшего использования.

Trinitron Color TV

GB

RU

2

Do not place any objects on the TV. The apparatus

shall not be exposed to dripping or splashing and

that no objects filled with liquids, such as vases,

shall be placed on the apparatus.

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Do not open the cabinet and the rear cover of the

TV as high voltages and other hazards are present

inside the TV. Refer servicing and disposal of the

TV to qualified personnel.

Your TV is recommended for home use only.

Do not use the TV in any vehicle or where it may be

subject to excessive dust, heat, moisture or

vibrations.

Do not operate the TV if any liquid or solid object

falls into it. Have it checked immediately by

qualified personnel only.

Do not block the ventilation openings of the TV.

Do not install the TV in a confined space, such as a

bookcase or built-in cabinet.

For children’s safety, do not leave children alone

with the TV. Do not allow children to climb onto it.

Clean the TV with a dry and soft cloth.

Do not use benzine, thinner, or any other chemicals

to clean the TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape, glue) on the painted

cabinet of the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the

TV, the power cord and the antenna cable during

lightning storms.

3

Install the TV on a stable TV stand and floor which

can support the TV set weight. Ensure that the TV

stand surface is flat and its area is larger than the

bottom area of the TV.

Do not plug in too many appliances to the same

power socket. Do not damage the power cord.

Pull the power cord out by the plug. Do not pull

the power cord itself. Even if your TV is turned off,

it is still connected to the AC power source (mains)

as long as the power cord is plugged in. Unplug

the TV before moving it or if you are not going to

use it for several days.

To prevent fire or shock hazard, do not expose the

TV to rain or moisture.

Made in Malaysia.

Sony Corporation

6-7-35 Kitashinagawa,

Shinagawa-ku, Tokyo, 141-0001 Japan.

4

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to

secure the TV.

20 mm

3.8 mm

screws clamps band

Screw the band to the TV stand and to the

provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.

(2) Screw one clamp to a wall or pillar and

the other clamp to the provided hole at

the rear of your TV.

(1) Attach each end of a cord or chain to

the provided holders at the rear of

your TV.

(2) Securely fix the attached cord or chain

to a wall or pillar using an attachment

which can support the TV set weight.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

or

5

Table of Contents

Installation

Getting Started ..................................... 6

Setting up your TV

(“Initial Setup”) .................................... 7

Overview of Controls

TV front and rear panels ..................... 9

Using the remote control and

basic functions .................................... 10

Advanced Operations

Selecting the picture and sound

modes .................................................. 12

Watching Picture-in-Picture (PIP) ... 13

Enjoying the Party Mode .................. 14

Enjoying stereo or bilingual

programs ............................................. 15

Viewing Teletext ................................. 16

Operating optional components ...... 17

Menu Adjustment

Introducing the menu system .......... 18

Changing the “Picture” setting ........ 21

Changing the “Sound” setting ......... 23

Changing the Picture-in-Picture

(“PIP”) setting .................................... 25

Changing the “Channel Setup”

setting .................................................. 26

Changing the “Setup” setting .......... 28

Additional Information

Connecting the 3D WOOFER .......... 30

Connecting optional components ... 30

Troubleshooting ................................. 33

Specifications ...................................... 37

GB

6 Installation

Installation

x Getting Started

b

1

Step 1

Insert the batteries (supplied) into the remote.

Note

• Do not use old or different types of batteries together.

Step 2

Step 3

Step 4

Set up the TV by following the instructions of the

“Начальная настройкa” (“Initial Setup”) menu

(see page 7).

Plug in the power cord, then press ! on the TV to

turn it on.

Note

• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a

malfunction.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

Tip

• You can also connect your TV to other optional components

(see page 30).

7

Installation

x

Setting up your TV

(“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa” (“Initial

Setup”) menu will appear. You may change the menu language, preset the TV

channels automatically, change the order of TV channels that appear on the screen

and adjust the picture position using the buttons on the TV front panel.

Tip

• The MENU, and V/v/B/b buttons on the remote control can also be used for the

operations below.

1

Press 2 +/– to select the desired menu

language, then press t.

The selected menu language appears.

2

Press 2 +/– to select “Yes”, then press t

to preset the channels automatically.

The screen will indicate automatic

presetting in progress.

After all available channels have been tuned

and stored, the “Program Sorting” menu

appears automatically on the screen.

To skip automatic channel presetting, select

“No”, then press t.

If the message “No channel found. Please

connect cable/antenna” appears, check your

TV connections, then press t.

3

The “Program Sorting” menu enables you

to change the order in which the channels

appear on the screen.

a) If you wish to keep the channels in the

tuned order, press MENU.

b) If you wish to store the channels in a

different order:

1) Press 2 +/– to select the program

number with the channel you wish to

rearrange, then press t.

Program Sorting

Program:

01

02

03

04

Select channel

Program:

TV System: Auto

01

VHF Low

continue

8 Installation

The selected channel will appear on

the screen.

2) Press 2+/– to select the new

program number position for your

selected channel, then press t.

3) Repeat steps b) 1) and 2) if you wish

to change the order of the other

channels.

c) Press MENU to go to the next menu.

4

Press 2 +/– to adjust the bars on the top

and bottom of the menu if they are

slanted, then press t.

“Picture V-Position” menu appears.

5

If the upper and lower bars are not

equally positioned to the top and

bottom of the screen, press 2 +/– to

adjust them, then press t.

If no adjustment is necessary, then press t.

6

Press 2 +/– to select “No”, then press t.

This menu will not appear again the next

time you turn on the TV by pressing !.

To allow this menu to appear again, select

“Yes”, then press t.

Tips

• You can immediately go to the end of the ”Initial Setup” menu by pressing MENU.

• You can also set up your TV using the menu system (see page 18).

• You can also preset the channels automatically by pressing MENU (AUTO PROG) button on

the TV front panel for about five seconds.

01

Program Sorting

Program:

01

02

03

04

Select new position

continued

9

Overview of Controls

0

qa

9

4

L(MONO) R

qs

qg

qh

qf

qd

3

2

1

PROG

MENU

(AUTO PROG)

SOUND

MODE

4

58

7

6

AUTO PROG:Press [MENU] for 5sec

MIC

123

RLY

C

B

C

R

TV front panel

TV rear panel

x TV front and rear panels

Button/Terminal Function Page

1 ! Turn off or turn on the TV. 6

2 1 Standby indicator. 6

2 Wake Up indicator. 11

3 Remote control sensor. –

4 PROG +/– Select program number. –

5 2 +/– Adjust volume. –

6 t Select TV or video input. 30

Menu operations

5 2 +/– Select and adjust items. –

6 t Confirm selected items. –

7 MENU Display or cancel the menu. –

7 (AUTO PROG) Preset channels automatically. 8

8 SOUND MODE Select sound mode options. 12

5-Band Graphic Equalizer display will appear.

9 t4 Video input terminal 4. 30

0 i Headphone jack. –

qa MIC Microphone input terminal. 14

qs Component video input terminal. 32

qd T Monitor output terminal. 31

qf t1, t2, t3 Video input terminal 1, 2, 3. 31

qg 8 Antenna input terminal. 31

qh WOOFER 3D WOOFER terminal. 30

10 Overview of Controls

x Using the remote control and basic

functions

1

2

3

4

6

7

8

9

0

5

DVD

MENU

TV

PROG

VIDEO

wf

wj

wh

8

1

2

4

qg

qf

0

7

6

5

qk

qa

3

ql

9

qh

A/B

wk

OPTION RESET

PA RT Y

MODE

qj

qd

qs

w;

wa

wg

Button Description Page

1 ?/1 Turn off temporarily or turn –

on the TV.

3 a Display the TV program. –

4 t Select video input. 30

0 Change the picture size: –

“On” (16:9 wide-mode), “Off”.

qs Select surround mode options: –

“TruSurround” (surround sound

that spreads out to the rear of a

room), “WOW” (full, deep bass

sound), “Simulated” (stereo-like

monaural sound), “Off”.

qd Jump to last program number –

that has been watched for at

least five seconds.

qf PROG +/– Select program number. –

qj Mute the sound. –

qk

Display on-screen information. –

ql DVD

Select component video input. 32

w; PARTY

Adjust your TV for Party Mode. 14

MODE

wh Select sound mode options. 12

5-Band Graphic Equalizer display

will appear.

wj Select picture mode options. 12

wk 0 – 9, - Input numbers. –

wl 2 +/– Adjust volume. –

ea RESET Set TV to factory setting. 33

Menu operations

7 MENU Display or cancel the menu. 20

wf V, v, B, b Select and adjust items. 20

wg Confirm selected items. 20

Stereo/bilingual operations

5 A/B Select stereo/bilingual mode 15

Timer operations

qg Set TV to turn off automatically

–

according to the desired period of

time (max. of one hour and 30 min.).

(Sleep Timer)

11

Overview of Controls

WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW

and TruSurround technologies are incorporated under license from SRS Labs, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866.

“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

Button Description Page

qh

Set TV to turn on automatically according to the

–

desired period of time (max. of 12 hours).

The indicator on TV lights up amber once you

set the wake up timer.

If no buttons or controls are pressed for more than

one hour after the TV is turned on using the wake up

timer, the TV automatically goes into standby mode.

Teletext operations (green label)

4 Stop Teletext from scrolling. 16

5 Enlarge the Teletext display. 16

9 Display Teletext broadcast. 16

qa z (red, green, Access a FASTEXT menu. 16

yellow, blue)

qf

, Display the next or previous page. 16

qg Show TV screen while waiting for Teletext page. 16

qh Display Teletext service contents. 16

qk Reveal concealed information. 16

PIP operation (yellow label)

6 Adjust position of sub screen. 13

8 PIP PROG +/ Display and change programs in the sub screen. 13

PIP PROG –

wa Swap main and sub screens. 13

ws Swap sound between main and sub screen. 13

wd Display a sub screen. 13

wg Change sub screen to main screen. 13

Optional components operations

2 VIDEO ?/1 Power. 17

qj Mute the sound. 17

wf > Fast forward/Step forward. 17

wf . Rewind/Step backward. 17

wf x Stop. 17

wf X Pause. 17

wg N Play. 17

wl 2 +/– Adjust volume. 17

e; OPTION Operate optional components. 17

(Wake Up Timer)

12 Advanced Operations

Advanced Operations

Selecting the sound mode

Press (or SOUND MODE on the front panel) to select the desired sound mode.

5-Band Graphic Equalizer display will appear.

Select To listen to

“Dynamic” dynamic and clear sound that emphasizes both the low

and high tones.

“Drama” sound that emphasizes voice and high tones.

“Soft” soft, natural and relaxing sounds.

“Personal” the last adjusted sound setting from the

“Sound Adjustment” option in the menu (see page 24).

x Selecting the picture and sound

modes

You can select picture and sound modes and adjust the setting to your

preference in the “Personal” option.

Selecting the picture mode

Press to select the desired picture mode.

Select To view

“Dynamic” high contrast pictures.

“Standard” normal pictures.

“Soft” mild pictures.

“Personal” the last adjusted picture setting

from the “Picture Adjustment”

option in the menu (see page 22).

Dynamic

100 300 1k 3k 8k

Drama

100 300 1k 3k 8k

Soft

100 300 1k 3k 8k

Personal

1

2

3

4

6

7

8

9

0

5

DVD

MENU

VIDEO

A/B

PA RT Y

MODE

13

Advanced Operations

x Watching Picture-in-Picture (PIP)

With the PIP feature, you can display two different TV

programs or video input at the same time by using the

button.

To

Display a sub screen

Change a program number

in the sub screen

Adjust position of sub screen

Swap pictures between

the main and sub screens

Swap sound between the

main and sub screens

A “ ” symbol will appear

next to the program

number or video input

display to indicate which

screen you are hearing.

Selecting TV program using PIP

You can select your desired TV program directly from the PIP sub screen by using PIP

PROG +/– buttons.

1. Press PIP PROG +/– until the desired program appears in the sub screen.

2. Press to change the sub screen program to the main screen.

Notes

• You can only enjoy stereo sound from the main screen.

• You cannot change the picture to a video input in the sub screen. You can only display a video

input, in the sub screen by swapping the pictures when a video input is displayed in the main

screen.

• The picture and sound from the T (monitor output) terminals will always be from the main

screen, even when you select the sub screen sound by pressing (see page 31).

PIP PROG +/

PIP PROG –

Press

.

To cancel the sub screen, press

the button again.

PIP PROG + or

PIP PROG –.

.

1

2

3

4

6

7

8

9

0

5

DVD

MENU

VIDEO

A/B

PA RT Y

MODE

14 Advanced Operations

x Enjoying the Party Mode

You can sing along with any music program of TV broadcast or with any audio/

video equipment or create visual presentations (e.g. photos or video stories) with

narration and favorite background music by using the Party Mode feature.

1

Select the input connected to your audio/video equipment (see pages

30 – 32).

2

Connect the microphone (not supplied) to the microphone input terminal

and switch it on.

You can begin singing or speaking from the microphone at the last TV volume

setting.

3

Press PARTY MODE to display the “Party Mode Setup” menu. Press V or v to

adjust “MIC Level” (microphone volume) and “Echo Level” of the

microphone sound.

4

If you want to change the audio source, select the input connected to the

audio equipment which you want to hear from “Audio Input Fix” (see page

28).

To revert to the original sound source, press PARTY MODE again to display the

“Party Mode Setup” menu and select “Off” from “Audio Input Fix”

(see page 28).

Tip

• Microphone volume will be affected by TV volume.

Notes

• Be sure to adjust the “MIC Level“ and “Echo Level” to the minimum level before plugging in

and disconnecting the microphone.

• For your own safety, do not use or plug in the microphone during lightning storms.

• Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback

(howling) and distortion.

4

L(MONO) R

MIC

O

F

O

N

TV front panel

1

2

3

DVD

MENU

VIDEO

A/B

PA RT Y

MODE

PARTY

MODE

15

Advanced Operations

When receiving a NICAM program

Broadcasting On-screen display (Selected sound)

NICAM

stereo

NICAM

bilingual

NICAM

monaural

When receiving an A2 program

Broadcasting On-screen display (Selected sound)

A2

stereo

A2

bilingual

NICAM

(Stereo sound)

Mono

(Regular sound)

t

NICAM Main

(Main sound)

NICAM Sub

(Sub sound)

Mono

(Regular sound)

tt

t

Mono

(Regular sound)

Stereo

(Stereo sound)

t

Main

(Main sound)

Sub

(Sub sound)

t

NICAM Main

(Main sound)

Mono

(Regular sound)

t

x

Enjoying stereo or bilingual programs

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo

systems by using the A/B button.

Note

• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound

becomes monaural but the noise is reduced.

1

2

3

4

6

7

8

9

0

5

DVD

MENU

TV

P

R

O

G

VIDEO

A/B

OPTION RESET

PA RT Y

MODE

A/B

16 Advanced Operations

x Viewing Teletext

Some TV stations broadcast an information service called Teletext which allows

you to receive various information, such as stock market reports and news.

You can use the buttons on the remote to view Teletext.

To Do this

display a Teletext Press . Each time you press , the

page on the screen changes as follows:

TV picture Teletext t Teletext and TV t TV.

If there is no Teletext broadcast, “100” is

displayed at the top left corner of the

screen.

check the contents Press .

of a Teletext service An overview of the Teletext contents,

including page numbers, appears on the

screen.

select a Teletext page Press the number buttons to enter the

three-digit page number of the desired

Teletext page. If you make a mistake,

reenter the correct page number. To

access the next or previous page, press

or .

hold (pause) a Press to display the symbol “ ” at

Teletext display the top left corner of the screen. To

resume normal Teletext viewing, press

.

reveal concealed Press .

information (e.g., To conceal the information, press the

an answer to a quiz) button again.

enlarge the Teletext Press . Each time you press , the

display Teletext display changes as follows:

Enlarge upper half t Enlarge lower

half t Normal size.

stand by for a Teletext (1) Enter the Teletext page number that

page while watching you want to refer to, then press .

a TV program (2) When the page number is displayed,

press to show the text.

select a FASTEXT Press z (red, green, yellow and blue)

menu or the colored that corresponds to the desired menu or

boxes page number.

turn off Teletext Press a.

Note

• The FASTEXT feature can be used only when the FASTEXT broadcast is available.

z (red,

green,

yellow,

blue)

1

2

3

4

6

7

8

9

0

5

DVD

MENU

TV

P

R

O

G

VIDEO

A/B

OPTION RESET

PA RT Y

MODE

,

17

Advanced Operations

x Operating optional components

You can use the supplied remote to operate Sony audio/video equipment.

Setting up the remote to work with other connected equipment

While keeping VIDEO ?/1 For example, to operate a

pressed, press the corresponding Sony 8 mm VCR:

number button for the desired

equipment (see the chart

below).

To control Hold down VIDEO ?/1 and press

Audio System 1, 1x, 2 or 3 0, 1, 2, or 3

DVD 1, 2 or 3 4, 5 or 6

VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9

To Press

turn on/off VIDEO ?/1

play N while keeping OPTION pressed.

stop x while keeping OPTION pressed.

fast forward/ step forward or rewind/ > or . while keeping OPTION

step backward pressed.

pause X while keeping OPTION pressed.

Press again to resume normal playback.

mute the sound while keeping OPTION pressed.

(Audio System 1, 1x, 2 or 3 only)

adjust volume 2 +/– while keeping OPTION pressed.

(Audio System 1, 1x, 2 or 3 only)

Operating audio/video equipment

Press VIDEO ?/1 or while keeping OPTION pressed, press N , x , ., > ,

X ,

or 2 +/– (see the chart below).

Notes

• If the equipment does not have a certain function, the corresponding button on the remote

will not operate.

• Some equipment might not respond properly to buttons on TV’s remote. In this case, use the

equipment’s own remote control.

+

VIDEO

8

18 Menu Adjustment

Menu Adjustment

x Introducing the menu system

The MENU button lets you open a menu and change the settings of your TV.

The following is an overview of the menu system.

Return icon

Setup icon

Channel Setup icon

PIP icon

Name of the current

menu

Picture icon

Menu level 3

Menu level 2

User Guidance

Menu level 1

Level 1

“Picture”

“Sound”

Level 2

“Mode”

“Picture Adjustment”

“Color Temperature”

“3D Intelligent

Picture”

“Mode”

“Sound Adjustment”

“Balance”

“Intelligent Volume”

“Surround”

Level 3/Function

Select the picture mode:

“Dynamic” t “Standard” t “Soft” t “Personal”

Adjust the “Personal” option:

“Picture” t “Brightness” t “Color” t

“Hue” t “Sharpness” t “Reset”

Adjust white color tint:

“Cool” t “Neutral” t “Warm”

Optimize picture quality:

“On” t “Off”

Select the sound mode:

“Dynamic” t “Drama” t “Soft” t “Personal”

Adjust sound frequency settings of “Personal”

option:

“Adjust” t “Reset”

Select to emphasize the left and right speakers.

Adjust volume automatically:

“On” t “Off”

Select the surround mode:

“TruSurround” t “WOW” t “Simulated” t

“Off”

Page

21

23

Confirm

End

Setup

Wide Mode:

Video Label

Picture Position

Party Mode Setup

Language: English

Color System:

Select

Sound icon

19

Menu Adjustment

Level 1

“PIP”

“Channel Setup”

“Setup”

Level 2

“PIP”

“Swap”

“Position”

“Auto Program”

“Manual Program”

“Program Label”

“Program Block”

“Program Sorting”

“Language”

“Picture Position”

“Party Mode

Setup”

“Wide Mode”

“Video Label”

“Color System”

Level 3/Function

Display a sub screen within the main picture:

“On” t “Off”

Exchange pictures between main screen and sub

screen.

Change the position of the sub screen

Preset channels automatically.

Preset channels manually.

Label the program number.

Block unwanted programs.

Change the order in which the channels appear on

the screen.

Change the menu language:

“English” t “ ” (Russian)

Adjust the picture position.

Adjust your TV for Party Mode.

Change the picture size:

“On” (16:9 wide-mode) t “Off”

Label the connected equipment.

Select the color system:

“Auto” t “PAL” t “SECAM” t

“NTSC3.58” t “NTSC4.43”

Page

25

26

28

continue

20 Menu Adjustment

1

2

3

4

6

7

8

9

0

5

MENU

TV

P

R

O

G

OPTION RESET

How to use the menu

Other menu operations

Tips

• If you want to exit from Menu level 2 to Menu level 1, press V or v until the return icon ( ) is

highlighted, then press .

• The MENU, t and 2 +/– buttons on the TV front panel can also be used for the operations

above (see page 9).

Note

• When a feature is dimmed in the menu, it is not selectable.

To

Adjust the setting value

Move to the next/previous menu level

Cancel the menu

Press

V, v, B or b .

B or b.

MENU.

Press V or v to select

the desired item.

Press (or b) to

confirm your

selection and

go to the next

level.

Press MENU to

display the menu.

Select

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Mode: Dynamic

3D Intelligent Picture: On

Select

End

Channel Setup

Confirm

Program Label

Manual Program

Program Block

Program Sorting

Auto Program

Select

End

Channel Setup

Confirm

Auto Program

Program Label

Manual Program

Program Block

Program Sorting

continued

Страница загружается ...

Sony KV-SR29 Руководство пользователя

Это руководство также подходит для

Sony KV-SR29 Руководство пользователя

Похожие модели бренда