Harman Kardon BDT 30 Инструкция по применению

Blu-ray Disc

™

player

BDT 3/BDT 30

Owner’s Manual

Safety Instructions

BDT 3/BDT 30

IMPORTANT SAFETY INSTRUCTIONS 3

UNPACKING 5

INSTALLATION LOCATION 5

CLEANING 5

THANK YOU FOR CHOOSING HARMAN KARDON

PRODUCTS 5

BDT 3/BDT 30 FEATURES 6

SUPPLIED ACCESSORIES 6

FRONT-PANEL CONTROLS 7

REAR-PANEL CONNECTORS 8

REMOTE CONTROL FUNCTIONS 8

CONNECTING THE PLAYER 10

PREPARING THE REMOTE CONTROL 10

SETTING UP THE PLAYER 11

PLAYING DISCS 14

PLAYING FILES FROM USB DEVICES AND CD DATA DISCS 16

USING PLAYLISTS 18

TROUBLESHOOTING 19

SPECIFICATIONS 20

ENGLISH

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type

plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally

or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, fire or the like.

Important Safety Instructions

BDT 3/BDT 30

Important Safety Instructions

FCC Regulations

FCC Information For Users

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference; and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment off and then on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment to a different outlet so that the equipment and receiver are

on different branch circuits.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modiﬁcations not expressly approved by HARMAN could void the

user’s authority to operate the equipment.

IC Statement and Warning

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique

de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO

ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE

(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE PRODUCT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL

TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED

“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF

SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SEE MARKING ON BACK OF PRODUCT.

Instructions for Users on Removal and Disposal of Used Batteries.

Specifications of Included Battery Types.

These symbols shown on the product or the packaging or in the manual or separate

information sheet mean that the product itself, as well as the batteries included or built

into the product, should never be thrown away with general household waste. Take them

to applicable collection points, where proper treatment, recycling and recovery takes

place, in accordance with national or local legislation, or European Directives 2002/96/

EC and 2006/66/EC.

Correct handling of the product and batteries to be disposed saves resources and

prevents possible negative effects on the environment or human health.

The batteries included with your equipment may be alkaline, carbon zinc/manganese

or lithium (button cells) type. All types should be disposed of according to the above

instructions.

To remove the batteries from your equipment or remote control, reverse the procedure

described for inserting batteries in the owner’s manual.

For products with a built-in battery that lasts for the lifetime of the product, removal

may not be possible for the user. In this case, recycling or recovery centers handle the

dismantling of the product and the removal of the battery. If, for any reason, it becomes

necessary to replace such a battery, this procedure must be performed by authorized

service centers.

BDT 3/BDT 30

Important Safety Instructions

This Class B digital apparatus complies with

Canadian ICES-003. For models having a power

cord with a polarized plug:

CAUTION: To prevent electric shock, match wide

blade of plug to wide slot, fully insert.

For Canadian Model

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada. Sur

les modèles dont la ﬁche est polarisee:

ATTENTION: Pour éviter les chocs électriques,

introduire la lame la plus large de la ﬁche dans

la borne correspondante de la prise et pousser

jusqu’au fond.

CAUTION: This product uses a laser system. To prevent direct exposure to the laser beam,

do not open the cabinet enclosure or defeat any of the safety mechanisms provided for

your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this

product, please read the owner’s manual carefully and retain it for future use. Should

the unit require maintenance or repair, please contact your local Harman Kardon service

center. Refer servicing to qualiﬁed personnel only.

For Canadian Model

ENGLISH

Unpacking

The carton and shipping materials used to protect your new player during shipment were

specially designed to cushion it from shock and vibration. We suggest that you save the

carton and packing materials for use in shipping if you move or if the unit ever needs

repair.

To minimize the size of the carton in storage, you may wish to ﬂatten it. You can do it by

carefully slitting the tape seams on the carton’s bottom and collapsing it. You can store

cardboard inserts in the same manner. Packing materials that cannot be collapsed should

be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and

other sections of the shipping-protection materials are recyclable. Please respect the

environment and discard those materials at a local recycling center.

Remove the protective plastic ﬁlm from the front-panel lens. Leaving the ﬁlm in place will

affect the performance of your remote control.

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards, place

the unit on a ﬁrm and level surface. When placing the unit on a shelf, be certain

that the shelf and any mounting hardware can support the weight of the product.

• Provide proper space both above and below the unit for ventilation. If this product

will be installed in a cabinet or other enclosed area, make certain that there is

sufﬁcient air movement within the area. Under some circumstances, a fan may

be required.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations, or in an area that is exposed to

direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the ventilation slots on the top and sides of the unit or place objects

directly over or next to them.

• Do not place the BDT 3/BDT 30 directly on top of a product that generates

excessive heat.

• Due to the heat generated by the player and other components in your system,

there is the remote possibility that the rubber padding on the bottom of the unit’s

feet may leave marks on certain wood or wood-veneer materials. Use caution

when placing the unit on soft woods or other materials that heat or heavy objects

may damage. Some surface ﬁnishes may be particularly sensitive to absorbing

such marks, due to a variety of factors beyond Harman Kardon control, including

the nature of the ﬁnish, cleaning materials used, normal heat and vibration caused

by the use of the product, or other factors. Your warranty will not cover this type of

damage to furniture, so exercise caution in choosing an installation location for the

component and in performing normal maintenance practices.

• Your new Harman Kardon Blu-ray Disc

™

player requires a broadband Internet

connection for BD-Live

™

interactivity.

Cleaning

• When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only

after unplugging the AC power cord, wipe it with a soft cloth dampened with mild

soapy water, then a fresh cloth with clean water. Wipe it dry immediately with a

dry cloth. NEVER use benzene, aerosol cleaners, paint thinner, alcohol or any other

volatile cleaning agent. Do not use abrasive cleaners, as they may damage the

ﬁnish of metal parts. Avoid spraying insecticide near the unit.

Please register your product on our Web site at

www.harmankardon.com.

Note: You’ll need the product’s serial number.

At the same time, you can choose to be

notiﬁed about our new products and/or special

promotions.

Thank You for Choosing Harman Kardon

Products!

For more than ﬁfty years, Harman Kardon products have been at the cutting edge of audio

and home theater technology. The ﬁrst audio receiver wore a Harman Kardon badge, and

the company has been producing innovative entertainment products ever since. The BDT

3/BDT 30 Blu-ray Disc

™

player is the latest component offered in that proud tradition.

Incorporating the latest 3-D, high-deﬁnition audio and video processing technologies, the

BDT 3/BDT 30 is an essential part of a modern home theater system. It plays your favorite

Blu-ray Disc movies with up to 1080/24p video resolution when available on the disc, and

thanks to HDMI

(High-Deﬁnition Multimedia Interface

) 1.4a with 30/36-bit Deep Color

connectivity, lets you experience the latest 3-D home entertainment when you connect

it to a 3-D-capable TV.

Connect the BDT 3/BDT 30 to the Internet, and BD-Live

™

interactivity (available with

compatible discs) delivers additional features, updates and news of live events. Even your

older DVD-Video discs will deliver outstanding picture quality when they are upscaled to

1080p video resolution.

Yet with all of its sophistication, the BDT 3/BDT 30 is simple to operate. Its controls are

similar to those of DVD players, and its enhanced on-screen menu system guides you

every step of the way. Easy to use and delivering outstanding performance, the BDT 3/

BDT 30 is sure to provide enjoyment for many years to come.

If you have any questions about this product, its installation or its operation, please

contact your retailer or custom installer, or visit the Harman Kardon Web site at

www.harmankardon.com.

NOTE: Your Blu-ray Disc player is designed and manufactured for compatibility

with region management information that is encoded on most Blu-ray Disc

recordings and DVD recordings:

• BDT 3 units are designed only for playback of discs with Blu-Ray Disc

Region Code A and DVD Region Code 1 information, or for discs that

do not contain any Region Code information.

• BDT 30 units are designed only for playback of discs with Blu-ray Disc

Region Code B and DVD Region Code 2 information, or for discs that do

not contain Region Code information.

If there is a Region Code on a disc other than the one your BDT player is

designed for, it will not play in your BDT player.

Unpacking

BDT 3/BDT 30

BDT 3/BDT 30 Features

Connectivity

• One HDMI connector

• One coaxial digital audio output connector

• Left and right analog audio output connectors

• One composite video output connector

• One USB 2.0 port that plays video, audio and photo content from USB devices

• Connects to your LAN (local area network) for BD-Live interactivity via the Internet

Ease of Use

• On-screen menu system

• Dot-matrix front-panel information display

• Full-function remote control

Disc Player Features

• HDMI 1.4a with 3-D and 30/36-bit Deep Color

• Region coding: Blu-ray Disc Region A/DVD Region 1 (BDT 3 models);

Blu-ray Disc Region B/DVD Region 2 (BDT 30 models)

• Plays 5-inch (12cm) and 3-inch (8cm) discs

• Video formats supported: BD-Video (single-layer or double-layer), BD-R, BD-RE,

DVD-Video, DVD+R/+RW, DVD-R/-RW, CD-R/RW

• Audio formats supported: Dolby

Digital, Dolby Digital Plus, Dolby TrueHD, DTS

Digital, DTS-HD

™

High Resolution Audio, DTS-HD Master Audio,

™

CDDA (CD digital

audio), PCM, CBR @192kbps, VBR @ 355kbps, MP3: 32kbps – 320kbps bitrates,

including variable bitrate encoding

• CEC (Consumer Electronics Control) with basic controls over HDMI/CEC

• Supports JPEG still-image format

• Supports BD-Live interactivity

• Video upscaling to 720p and Full HD 1080p

• Progressive-scan video output

• JPEG resolution supported: 4,000 x 5,000 pixels (W x H), 20M pixels maximum

• JPEG still-image rotation in 90-degree increments

• Thumbnail JPEG still-image menu

• Fast play rates: 2x, 4x, 8x, 16x, 32x

• Slow play rates: 1/2x, 1/4x, 1/8x, 1/16x

• Random play (CDs only)

• Repeat play

• Parental-control system with user-programmable password

• Disc recognition for up to 10 discs

• Aspect-ratio adjustment

Supplied Accessories

If any of these items are missing, please contact Harman Kardon Customer Service via

www.harmankardon.com.

Remote control

Two AAA batteries

HDMI cable

Power cord

(Note: The power cord included will vary depending on where the unit is sold.)

BDT 3/BDT 30

BDT 3/BDT 30 Features

ENGLISH

BDT 3/BDT 30

Front-Panel Controls

Power Indicator:

When the BDT 3/BDT 30 is plugged into AC power and its rear-panel

Main Power switch is set to “On,” the LED turns amber to indicate that the player is in

Standby mode. When you turn the BDT 3/BDT 30 on (by the Power button or the remote

control), the LED turns white.

Power Button

: This button toggles the BDT 3/BDT 30 between the On and Standby

modes.

Disc Drawer:

Insert a compatible disc into the drawer. The BDT 3/BDT 30 will accept

5-inch (12cm) and 3-inch (8cm) discs.

Open/Close Button:

Press this button to open and close the disc drawer. Before

pressing this button, make sure that no objects are blocking the disc drawer.

Play Button:

Press this button to play a disc that has been loaded into the player’s disc

drawer. Pressing this button when viewing photos begins a slide show with all photos in

the current folder.

Pause Button:

Press this button to pause a disc that is playing. Pressing the button

while a Blu-ray Disc program or DVD program is playing will freeze-frame on the current

video frame. Pressing the button while the disc is paused will resume play. Pressing this

button while viewing photos freezes the current photo on the screen.

Stop Button:

Press this button to stop playback. (With some discs, pressing the Play

button will resume playback from the point where it stopped.) Press the Stop button twice

to stop playback fully.

Information Display:

Previous/Step Button:

Press this button once to skip to the

beginning of the track or chapter being played – or, when viewing photos, to the previous

photo. Press the button twice to skip to the beginning of the previous chapter or track.

Press the button repeatedly to skip back through the previous chapters or tracks. When

video content is playing, press the Pause button, after which each press of the Previous/

Step button will step the video back by one frame.

Next/Step Button:

Press this button once to skip to the beginning of the next track or

chapter – or, when viewing photos, to the next photo. Press the button repeatedly to skip

ahead through the subsequent chapters or tracks. When video content is playing, press

the Pause button, after which each press of the Next/Step button will step the video

forward by one frame.

USB Port:

Gently insert a USB ﬂash drive or an HDD disc drive with a USB Standard-A

cable to this port.

IMPORTANT:

Do not connect a PC or other USB host/controller to this port, or you

may damage both the BDT 3/BDT 30 and your device.

Orient the device’s plug so it ﬁts all the way into the BDT 3/BDT 30’s USB connector.

You may insert or remove the device at any time – there is no installation or ejection

procedure.

Power

Button

Power

Indicator

Disc

Drawer

Information

Display

Open/Close

Button

Play

Button

Pause

Button

Stop

Button

Previous/

Step

Button

Next/Step

Button

USB

Port

Front-Panel Controls

ON OFF

BLU-RAY DISC PLAYER

110V-240V –50/60Hz 25W

NOTE: See Connecting the Player, on page 10, for detailed information about

making connections.

Main Power Switch: This mechanical switch turns the BDT 3/BDT 30’s power

supply on or off. After you have made and veriﬁed all connections (see Connecting

the Player, on page 10), set this switch to the “On” position. If you will not be using

the player for an extended period of time, you can set this switch to the “Off” position

to save energy.

Power Cord Connector: After you have made and veriﬁed all other connections,

plug the supplied AC power cord into this input and into an unswitched AC outlet.

Network Connector: To be able to use the BD-Live feature, connect this port to

your local area network (LAN) using a Cat. 5/Cat. 5e/RJ45 network cable. See

BD-Live Interactivity, on page 15, for more information.

Coaxial Digital Output Connector: Connect this output to the coaxial digital input

of your audio/video receiver or surround-sound processor. NOTE: If your audio/video

receiver or surround-sound processor has an HDMI connection, we recommend

using it for superior audio quality.

Analog Audio Output Connectors: Connect these outputs to your audio/video

receiver’s, surround-sound processor’s or analog recorder’s analog audio inputs.

Composite Video Output Connector: Connect this output to your TV’s or audio/

video receiver’s composite video input. NOTE: If your TV or audio/video receiver has

an HDMI connection, we recommend using it for superior video quality.

HDMI Output Connector: Connect the BDT player’s HDMI Output connector to the

HDMI input on your TV, audio/video receiver or surround-sound processor. The HDMI

cable transmits both video and audio, so if you’re connecting it directly to the TV

and are connecting the BDT 3/BDT 30’s Coaxial Digital Output connector to a home

theater audio system, we recommend that you disable the BDT 3/BDT 30’s HDMI

Audio Out to take full advantage of the home theater audio system’s superior audio

performance. See Audio Settings: Audio Output, on page 13, for more information.

IMPORTANT: Your BDT 3/BDT 30 is in compliance with HDCP (High-Deﬁnition Copy

Protection). Your TV must also be HDCP-compliant to be used with the player’s HDMI

output. For the best results, we do not recommend HDMI connections in excess

of ten feet without a repeater. If your TV has a DVI input, you may use an optional

HDMI-to-DVI cable or adapter for the video connection to the TV. (The DVI connection

is video-only.)

Fan Vents: The BDT 3/BDT 30 has a built-in fan to provide cooling air. To insure

proper operation, make sure that these vents are not blocked.

Remote Control Functions

Home

Button

Settings

Button

Resolution

Button

Subtitle

Button

Cursor

Buttons

Next/Step

Button

Thumbnail

Button

Angle

Button

Prev/Step

Button

Search/Slow

Reverse Button

Bookmark

Button

A–B Button

Play

Button

Power Off

Button

Power On

Button

Audio Button

Options Button

Find Button

PIP Button

Search/Slow

Forward Button

Popup Menu

Button

Top Menu

Button

Zoom Button

Numeric Buttons

Repeat Button

Pause Button

Exit Button

Display Button

Program Button

Clear Button

Dimmer Button

OK Button

Stop Button

Open/Close

Button

Options Button

Power On Button

Repeat Button

Stop Button

Exit Button

Prev/Step

Button

OK Button

Search/Slow

Reverse Button

Dimmer Button

Bookmark

Button

Program Button

A-B Button

Angle

Button

Clear Button

Find Button

Zoom Button

Home

Button

Next/Step

Button

PIP Button

Popup Menu

Button

Audio Button

Power Off

Button

Open/Close

Button

Pause Button

Display Button

Settings

Button

Search/Slow

Forward Button

Subtitle

Button

Resolution

Button

Play

Button

Cursor

Buttons

Thumbnail

Button

Top Menu

Button

Numeric Buttons

BDT 3/BDT 30

Rear-Panel Connectors/Remote Control Functions

Power Cord

Connector

HDMI Output

Connector

Analog Audio Output

Connectors

Main Power

Switch

Network

Connector

Fan

Vents

Rear-Panel Connectors

Composite Video

Output Connector

Coaxial Digital

Output Connector

ENGLISH

BDT 3/BDT 30

Remote Control Functions

Power On button: Press this button when the BDT 3/BDT 30 is in the Standby mode to

turn it on.

Open/Close button: Press this button to open and close the disc drawer. Before pressing

this button, make sure that no objects are blocking the disc drawer.

Power Off button: Press this button when the BDT 3/BDT 30 is on to place it in the

Standby mode.

Settings button: Press this button to display the player’s Settings menu. See Settings

Menus, on page 12, for more information.

Options button: Press this button to display any available options for the item that is

active at the time you press the button.

Home button: Press this button to return the on-screen display to the Home screen from

whatever screen is active when the button is pressed.

Angle button: Press this button to toggle through the multiple camera-angle

optionsfor the current disc. NOTE: This feature is disc-dependent. Not all discs feature

multiplecamera angles and allow you to change camera angles.

Audio button: Press this button to toggle through the different audio tracks that are

available for a disc. NOTE: This feature is disc-dependent. Not all discs feature multiple

audio tracks and allow you to change audio tracks.

Repeat button: When the BDT 3/BDT 30 is playing a Blu-ray Disc recording or DVD,

press this button to cycle through the following repeat modes: Chapter, Title, All, Off.

When the BDT 3/BDT 30 is playing a CD, this button cycles through the following repeat

modes: Track, All, Off. NOTE: This feature is disc-dependent. Not all discs allow repeat

functions.

Subtitle button: Press this button to toggle through the different subtitle options that are

available for the current disc. NOTE: This feature is disc-dependent. Not all discs feature

multiple subtitle options.

A-B button: Press this button to activate the A-B repeat mode. The ﬁrst press sets the

“A” repeat point; the second press sets the “B” repeat point and begins repeating the

section of the program between the two points. Pressing the A-B button while the A-B

repeat mode is active cancels the A-B repeat mode.

Find button: Press this button during disc playback to activate the search function,

which allows you to jump to a speciﬁc location on the disc. You can ﬁnd a location by

title, chapter or elapsed time.

Pause button: Press this button to pause a disc or music ﬁle that is playing. Pressing

the button while a Blu-ray Disc program or DVD program is playing will freeze-frame on

the current video frame. Pressing the button while the disc is paused will resume play.

Pressing this button while viewing photos freezes the current photo on the screen.

PIP button: Press to switch to a secondary video stream while playing a Blu-ray Disc

recording with BonusView special features.

Previous/Step button: Press this button once to skip to the beginning of the current

track – or, when viewing photos, to the previous photo. Press the button twice to skip

to the beginning of the previous track. Press the button repeatedly to step through the

previous chapters or tracks. When video content is playing, press the Pause button, after

which each press of the Previous/Step button will reverse the video by one frame.

Next/Step button: Press this button once to skip to the beginning of the next track or,

when viewing photos, to the next photo. Press the button repeatedly to step through the

next chapters or tracks. When video content is playing, press the Pause button ﬁrst; each

subsequent press of the Next/Step button advances the video one frame.

Stop button: Press this button to stop playback. (Pressing the Play button will resume

playback from the point where it stopped.) Press the Stop button twice to stop playback

fully. NOTE: Some settings and functions will be available only when the player is fully

stopped.

Search/Slow Reverse button: Press this button to reverse through the current disc

track. For Blu-ray Disc programs and DVD programs, each press cycles through 2x,

4x, 8x, 16x and 32x reverse speed. Pressing the button while a Blu-ray Disc recording

or DVD is paused will reverse through the chapter in slow motion. Each press cycles

through 1/2, 1/4, 1/8 and 1/16 normal speed.

Search/Slow Forward button: Press this button to fast-forward through a disc track.

For Blu-ray Disc recordings and DVDs, each press cycles through 2x, 4x, 8x, 16x and

32x normal speed. Pressing the button while a Blu-ray Disc recording or DVD is paused

will play through the chapter in slow motion. Each press cycles through 1/2, 1/4, 1/8 and

1/16 normal speed.

Play button: Press this button to play a disc that has been loaded into the player’s disc

drawer or a music ﬁle that has been highlighted on the on-screen menu. Pressing this

button when viewing photos begins a slide show of the photos.

Exit button: Press this button to return to the previous menu or menu level.

Popup Menu button: Pressing this button while playing a Blu-ray Disc recording or DVD

displays its popup menu. NOTE: This feature is disc-dependent. Not all discs have pop-up

menus. If a DVD has no pop-up menu, pressing the Popup Menu button may display the

disc menu, depending on how the disc’s menu system was authored.

OK button: Press this button to select a highlighted item on the on-screen menu.

Cursor buttons: Press these buttons to navigate through items on the on-screen menu.

Display button: Press this button to activate a bar display containing information about

the disc or program that is currently playing.

Top Menu button: Press this button to display the top menu of the Blu-ray Disc recording

or DVD that is playing. NOTE: This feature is disc-dependent. Not all DVDs have top

menus. If the DVD has no top menu, pressing the Top Menu button may display the disc

menu, depending on how the disc’s menu system was authored.

Bookmark (green) button: Press this button to activate the Bookmark function. See

Bookmark Function, on page 15, for more information.

Program (red) button: Press this button to create a programmed playback list for the

disc that is playing. See Programmed Play, on page 15, for more information.

Zoom (blue) button: Press this button to zoom in on or recede from a video image or

slide. Use the Navigation buttons to zoom in on different sections of the image. NOTE:

This function is disc-dependent. Not all discs allow this function.

Thumbnail (yellow) button: Press this button while playing a photo slide show to

display thumbnail images of all photos in the active directory.

Red, green, yellow and blue buttons: When the BDT 3/BDT 30 is playing a Blu-ray

Disc recording, these buttons can activate features and menus that may vary from disc

to disc. Refer to the menu instructions for each particular disc for more information.

NOTE: These Blu-ray Disc functions may override the Bookmark, Thumbnail, Program

and Zoom functions.

Numeric buttons: Press these buttons to enter numbers for various items.

Dimmer button: Press this button to toggle through the different brightness levels for the

player’s front-panel display: 100%, 50%, 25%, Auto/Off. When the brightness is set to

Off, the display will temporarily return to full brightness whenever you press any button

on the remote.

Clear button: Press this button to clear an incorrect entry made using the Numeric

buttons.

Connecting the Player

HDMI Connection

If Your Receiver/Processor Has an HDMI Connection

Use the supplied HDMI cable to connect the player’s HDMI Output connector to your

receiver/processor’s HDMI input. Use another HDMI cable to connect your receiver/

processor’s HDMI output to your TV’s HDMI input.

If Your Receiver/Processor Does Not Have an HDMI Connection

Use the supplied HDMI cable to connect the player’s HDMI Output connector directly to

your TV’s HDMI input.

Coaxial Digital Audio Output Connection

If you did not connect the BDT 3/BDT 30’s HDMI Output connector to your receiver/

processor, connect the player’s Coaxial Digital Output connector to your receiver/

processor’s coaxial digital input.

Analog Audio Output Connections

Connect the BDT 3/BDT 30’s Analog Audio Output connectors to your receiver/proces-

sor’s analog audio inputs or to your analog recorder’s analog audio inputs.

Composite Video Output Connection

If you did not connect the BDT 3/BDT 30’s HDMI Output connector to your TV or your

audio/video receiver, connect the player’s Composite Video Output connector to your

TV’s or audio/video receiver’s composite video input.

Network Connection

Use a Cat. 5/RJ45 network cable (not supplied) to connect the BDT 3/BDT 30’s Net-

work connector directly to a network router, a network switch, a network modem or an

Ethernet network wall jack that has Internet access. NOTE: The BDT 3/BDT 30 cannot

access content on other networked devices. The network connection enables the BDT 3/

BDT 30’s BD-Live features. See BD-Live Interactivity, on page 15, for more information.

Power Cord Connector

The BDT 3/BDT 30 comes with a detachable AC power cord. This type of cord makes it

easier for you to install and connect all other system wiring to the player’s rear panel.

NOTES:

• The power requirement for the BDT 3/BDT 30 is 110 – 240V AC, 50/60Hz, 25W.

Connecting to a power source other than the one listed may damage the player or

cause abnormal operation.

• Before connecting the AC power cord to a wall outlet, conﬁrm that all of the other

connections have been made correctly.

• Connect the female end of the BDT 3/BDT 30’s detachable power cord to the

player’s Power Cord connector. Plug the other end into a working, unswitched

AC outlet.

Set the BDT 3/BDT 30’s Main Power switch in the “On” position. The player’s Power

indicator will turn amber, indicating that the player is in the Standby mode.

Preparing the Remote Control

Installing the Batteries

Your BDT 3/BDT 30 remote control uses two AAA batteries (supplied). Insert the batteries

as shown in the illustration, making sure to observe the correct polarity.

–

Using the Remote Control

When using the remote, remember to aim it toward the player’s front panel. Make sure

that no objects, such as furniture, block the remote’s view of the player. Bright lights,

ﬂuorescent lights and plasma video displays may interfere with the function of the

remote.

• The remote has a range of about 20 feet (6.1m), depending on the lighting

conditions.

• You can use the remote at an angle of up to 30° from either side of the player.

If the remote does not seem to be operating properly, make sure that the batteries are

inserted correctly. If the remote still does not operate properly, replace both batteries

with new ones.

BDT 3/BDT 30

Connecting the Player/Preparing the Remote Control

ENGLISH

BDT 3/BDT 30

Setting Up the Player

NOTE:

The menu screens shown in this manual are for illustrative purposes and may

differ somewhat from the actual displays.

To set up your BDT 3/BDT 30, you will use the remote to navigate through all of the on-

screen menus and make selections from them.

• Use the Cursor Up/Down buttons to navigate through the menu list. When an item

is highlighted, a border will appear around it.

• To select a highlighted item, press the OK button. The screen will change

depending on your selection.

• To return to the previous screen, press the Exit button.

Setup Wizard

When you turn your BDT 3/BDT 30 on for the ﬁrst time, the on-screen menu will display

the Setup Wizard.

Setup Wizard

Page: 1/5

Welcome to the Harman Kardon BDT Setup

Wizard.

Some simple information is needed to ensure

you get the best experience from your product.

You can adjust these settings later in addition

to making changes to more advanced settings

by pressing the ‘Settings’ button on the

remote.

Before you can use your BDT 3/BDT 30, you need to set the language and make a few

basic settings so that the player’s video output will work properly with your TV. Press the

OK button and the Wizard’s language screen will appear.

Setup Wizard

Page: 2/5

Please select which language you

would like the BDT menus to appear.

After setting the language you want the on-screen menus to use, press the OK button,

and the Wizard’s TV-resolution screen will appear.

Setup Wizard

Page: 3/5

Please select the highest resolution that your

TV supports. If you are unsure, select “Auto.”

Upon making a selection the screen will be

changed to the chosen resolution. You will be

presented with the option to continue with the

new resolution or “Cancel” to return to the

previous resolution. If the screen remains

blank, please wait 15 seconds without

pressing anything and the system will

automatically return to the previous resolution.

Auto

480i/576i

480p/576p

720p

1080i

1080p

After selecting your TV’s highest resolution, press the OK button, and the Wizard’s

aspect-ratio screen will appear. If you’re unsure of your TV’s highest resolution, select

“Auto,” and the player will automatically select the optimal resolution.

Setup Wizard

Page: 4/5

Please select the best aspect ratio

that fits your TV.

16:9 Full

16:9 Normal

4:3 Pan & Scan

4:3 Letterbox

After selecting the aspect ratio that best ﬁts your TV, press the OK button to save your

setting, and then press it again to exit the Setup Wizard. For more information on aspect

ratios, see Aspect Ratio, on page 13.

BDT 3/BDT 30

Setting Up the Player

Settings Menus

Pressing the remote’s Settings button displays the BDT player’s settings menus, which

allow you to conﬁgure the player’s functions. Use the remote’s Cursor Left/Right buttons

to change from one menu to another, use the Cursor Up/Down buttons to navigate

through the lists that appear on the various screens, and use the OK button to select

highlighted items. Press the Exit button at any time to return to the previous screen.

Select to adjust general settings

System

Language

Playback

Parental Control

Network

General Settings

Select to adjust system settings

System

Language

Playback

Parental Control

Network

Front Panel Brightness

Screen Saver

Auto Power Off

CEC

One To uch Play

One To uch Standby

100%

Off

General Settings

System: The System option allows you to set the following system features:

• Front Panel Brightness: This option sets the brightness of the BDT 3/BDT 30’s

information display.

• Screen Saver: To prevent image burn-in, we recommended activating the Screen

Saver when using the BDT 3/BDT 30 with a CRT or plasma TV.

• Auto Power Off: This option sets the amount of time the BDT 3/BDT 30 remains on

while idle until it automatically enters the Standby mode.

• CEC: When this option is set to On, you can enable or disable the CEC One Touch

Play and One Touch Standby functions.

• One Touch Play and One Touch Standby: When these options are set to On, the

BDT 3/BDT 30 can be placed into the Play or Standby modes upon commands

from the remote control of a TV connected to the player’s HDMI Output connector.

• System Upgrade: Select this option when you want to install a ﬁrmware upgrade

for your BDT 3/BDT 30 that you’ve downloaded from a Harman Kardon source.

• Setup Wizard: This option activates the BDT 3/BDT 30’s Setup Wizard (see Setup

Wizard, on page 11).

• BD-Live Storage: This option lets you set up how the BDT 3/BDT 30 will

handle stored BD-Live content. You can choose to store the content on a USB

memory device via the BDT 3/BDT 30’s USB port. See BD-Live Interactivity, on

page 15, for more information.

• Restore Defaults: This option restores the BDT 3/BDT 30 to its factory default

setting values. NOTE: This option will also reset the parental-control password

back to the factory default of 0000. See Parental Control, on this page.

Language: This setting lets you set the language for the disc player and the disc menus,

the preferred audio language and the preferred subtitle language.

• NOTE: If the selected language is not available on the particular disc being played,

use the disc’s menu to select the language from those available on the disc.

Playback: The Playback option allows you to set the following disc playback features:

• Show Angle Icon: This option lets you select whether or not the angle icon will

automatically be displayed when a disc with multiple camera angles is played.

• Auto Play: This option lets you select whether discs will automatically begin

playing when they are loaded into the player.

• Show PIP Icon: This option lets you select whether or not the picture-in-picture

icon will automatically be displayed when you play a Blu-ray Disc recording with

picture-in-picture content.

• Show Secondary Audio Icon: This option lets you select whether or not the

Secondary Audio icon will automatically be displayed when you play a Blu-ray Disc

recording with secondary audio content.

• Disc Resume: This option lets you select whether or not a disc that has been

ejected while playing will resume play from that location the next time it is inserted

into the disc player. NOTE: This feature is disc-dependent. Not all discs support

disc resume.

• DivX

VOD DRM: This option displays your player’s DivX registration information.

Parental Control: This option lets you set the player’s parental-control password and the

level of parental control you want active. NOTE: The default password is 0000.

Network: This option allows you to set the following network features:

• Information: This option displays your network’s IP, subnet mask, gateway and

DNS addresses.

• Test Connection: This option tests for a proper network connection to the BDT 3/

BDT 30.

• IP Conﬁguration: This option lets you enter your network settings, either

automatically or manually. Unless your network administrator instructs you

otherwise, you should use the Auto option.

• BD-Live Connection: This option lets you set the BDT 3/BDT 30’s BD-Live

connection preferences. “Always Allow” always allows downloading of BD-Live

content. “Limit” allows content downloading only if the disc is ofﬁcially BD-Live

certiﬁed. “Prohibited” does not allow any BD-Live access. See BD-Live Interactivity,

on page 15, for more information.

• Proxy Setting: “Enabled” allows you to select and set the Proxy Host and Proxy

Port if your network requires a proxy setting. “Disabled” bypasses any Proxy Host

and Proxy Port settings and prevents their selection. This option is for advanced

users only and in most cases should be left set to “Disabled.”

ENGLISH

Display Settings

Select to adjust display settings

Video Processing

Aspect Ratio

Resolution

Color Space

Film Mode

HDMI Deep Color

16:9 Full

Auto

RGB

Off

Display Settings

TV: This option allows you to set the following display parameters:

• Aspect Ratio: This option lets you select how you want 4:3 programs displayed

on a 16:9 TV, or 16:9 programs displayed on a 4:3 TV. “16:9 Full” stretches 4:3

material to ﬁll a 16:9 TV screen. “16:9 Normal” displays 4:3 programming on a

16:9 TV with black boxes on either side of the image, preserving its original visual

composition without distortion. “4:3 Pan & Scan” zooms in on widescreen material

to ﬁll a 4:3 screen. “4:3 Letterbox” displays 16:9 programming with black bars

above and below the photo, preserving the program’s original visual composition

without distortion.

• Resolution: This option lets you select the video-output resolution of the BDT 3/

BDT 30. The “Auto” setting will automatically select the best resolution for your TV.

• Color Space: This option lets you select a predeﬁned color space for the video

photo.

• Film Mode: If your TV can handle a 1080p 24Hz signal (that is, if it has 1080p

resolution and a video-refresh rate that is a whole-number multiple of 24), set this

option to “On” to get maximum resolution from Blu-ray Disc content mastered at

24 frames per second. If your display cannot handle a 1080p/24Hz signal, set this

option to “Off,” and the BDT 3/BDT 30 will upconvert 24-frame-per-second ﬁlm

material to the standard video 30Hz refresh rate.

• HDMI Deep Color: This option allows you to adjust the resolution of color output

to your TV. If your TV accepts Deep Color, this option allows your TV to display an

enhanced color palette.

• On: The BDT 3/BDT 30 always outputs 36-bit or 30-bit Deep Color.

• Off: The BDT 3/BDT 30 does not output Deep Color (color resolution

remains at 24 bits).

• TV Standard: This option lets you set the standard of your TV display.

• Auto: The BDT 3/BDT 30 automatically sets the standard for your TV.

• PAL: Sets the video display to the PAL standard.

• NTSC: Sets the video display to the NTSC standard.

• HDMI 3D: This option determines how the player handles 3-D programs when

connected to a 3-D-capable TV via the HDMI connection.

• Auto: The BDT 3/BDT 30 automatically displays video in 3-D when the

program is in 3-D format.

• Off: The BDT 3/BDT 30 does not display the video in 3-D.

Video Processing: This option allows you to set the BDT 3/BDT 30’s internal video

processing.

• Video Mode: This option lets you select a preset video-processing option to

optimize the picture for the current program by adjusting the brightness, contrast,

color and sharpness.

• Standard: Neutral control settings

• Vivid: For video games

• Cinema: For movies and many television broadcasts

• Custom: This option lets you adjust the video settings manually. The

Brightness, Saturation (color saturation), Hue and Contrast settings appear

as sliders. The default setting for each adjustment is 0. Use the Cursor Left/

Right buttons to change each setting’s value.

Audio Settings

Select to adjust Audio output settings

Audio Out HDMI Audio Out

Coaxial Output

PCM Downsampling

Dynamic Range Ctrl

Auto

PCM

Off

Audio Settings

Audio Output: This option lets you set the following items:

• HDMI Audio Out: In addition to digital video signals, the BDT 3/BDT 30’s HDMI

connection also carries digital audio signals. Four settings are available:

• Auto: This option causes the BDT player’s HDMI Output connector to output

the digital audio format that best matches the surround-sound decoding

capabilities of the component to which it’s connected.

• Bitstream Native: This option outputs the program in its native audio format

via the HDMI Output connector.

• PCM: This option outputs a two-channel downmix derived from the

program’s native audio format via the HDMI Output connector.

• Off: This option turns the BDT player’s HDMI audio output off. If you are

using the player’s HDMI connection for video only (you have connected

the player’s HDMI output directly to your TV and have connected the

BDT 3/BDT 30 Coaxial Digital Output connector to a home theater audio

system), we recommend that you set the HDMI Audio Out to “Off.”

• Coaxial Output: If you are using the BDT player’s HDMI connection for video only

and have connected its Coaxial Digital Output connector to your home theater

audio system, select one of these three options:

• Bitstream Native: This option outputs the program’s native digital audio

soundtrack via the Coaxial Digital Output connector.

• PCM: This option outputs a two-channel downmix of the original

digital soundtrack via the Coaxial Digital Output connector. (See PCM

Downsampling, below.)

• Transcode: This option transcodes a program’s lossless format (Dolby

TrueHD or DTS-HD Master Audio) program to a lossy format and outputs it

via the Coaxial Digital Output connector.

• PCM Downsampling: This option sets the sampling rate of PCM two-channel

downmixed signal. Set this option to the highest sampling rate that the connected

component can handle. NOTE: If the component can handle a 192kHz sampling

rate, set this option to “Off,” which will pass 192kHz sampled material without

downsampling.

BDT 3/BDT 30

Setting Up the Player

Setting Up the Player/Playing Discs

• Dynamic Range Ctrl: This option lets you set the dynamic range control.

• Auto: The BDT 3/BDT 30 automatically sets the dynamic range, based on the

range of volume in the audio source.

• On: The BDT 3/BDT 30 always sets the dynamic range to on.

• Off: The BDT 3/BDT 30 always sets the dynamic range to off.

Information Menu

Select to browse system information

Information

Software Version: BDT V1.04.06

MAC Address: 00 -1B -44 -12 -1D

The Information menu will display the BDT 3/BDT 30’s software/ﬁrmware version number

and the player’s factory-assigned network MAC Address. This screen is for information

only and allows no user adjustments.

Playing Discs

Disc Handling Precautions

• To keep the disc clean, handle the disc by its edge. Do not touch the surface.

• Do not stick paper or tape on the disc. If there is glue (or a similar substance) on

the disc, remove the substance completely before using the disc.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or

leave it in a car parked in direct sunlight, as there can be a considerable rise in

temperature inside the car.

• After playing, store the disc in its case.

• Do not write on the label side with a ballpoint pen or other sharp writing utensils.

• Be careful not to drop or bend the disc.

Disc Cleaning Precautions

• Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center

out.

• Do not use solvents such as benzene, paint thinner, commercially available

cleaners or anti-static spray intended for vinyl LPs.

Regional Coding

BDT 3 players are designed only for playback of discs with Blu-Ray Disc Region Code

A and DVD Region Code 1 information, or for discs that do not contain any Region Code

information. BDT 30 players are designed only for playback of discs with Blu-ray Disc

Region Code B and DVD Region Code 2 information, or for discs that do not contain

Region Code information.

If there is a Region Code on a disc other than the one your BDT player is designed for, it

will not play in your BDT player.

Audio-visual material may consist of copyrighted works, which must not be recorded

without the permission of the owner of the copyright. Please refer to relevant laws

covering copyright protection.

Copy Protection

Your BDT player is in compliance with HDCP (High-Deﬁnition Copy Protection). A video

display connected via the HDMI Output connector must be HDCP-compliant.

The BDT player incorporates copy-protection technology. On Blu-ray Disc media and DVD

discs that include a copy-protection code, if the contents of the disc are copied using a

VCR, the copy-protection code prevents the videotape copy from playing normally.

Supported Disc Formats

The BDT player can play the following types of discs (in 5"/12cm and 3"/8cm size):

• BD-Video (single-layer or double-layer)

• DVD-Video

• DVD+R/+RW

• DVD-R/-RW

• CDDA (CD digital audio)

• CD-R/RW

NOTE: The compatibility and performance of dual-layer discs is not guaranteed.

Supported Media Codecs

The disc player can play media recorded in the following audio/video codecs:

• MPEG 1, Layer 1

• MPEG 2, Layer 2

• MPEG 2, Layer 3

• H.264

• VC-1

• AAC

• MP3 (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB)

• JPEG (from CD-R/RW, DVD+R/+RW, BD-R/RE and USB)

• DivX 3.x/4.x/5.x (from CD-R/RW, DVD+R/+RW and USB)

NOTE: Due to differences in the formats of certain discs, it is possible that some

discs may include a mix of features, some of which are not compatible with the

BDT 3/BDT 30. Similarly, although Blu-ray Disc recordings and DVDs are capable of a

wide range of features, not all discs include every capability of its system. For example,

although the player is compatible with multi-angle discs, that feature operates only when

the disc is specially encoded for multiple-angle play. To make certain that a speciﬁc

feature or soundtrack option is available, please check the options noted on the disc

jacket.

Playback capability of recordable discs may vary due to variations in the quality of the

disc and the recorder used to create the disc.

BDT 3/BDT 30

ENGLISH

BDT 3/BDT 30

Playing Discs

Loading and Playing Discs

Press the Open/Close button to open the disc drawer and insert the disc into the drawer.

Press the Open/Close button again to close the disc drawer.

• Do not load more than one disc into the disc drawer.

• Do not load the disc upside down.

After loading a disc into the player, press the Play button to begin playback.

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search/Slow Forward and Search/Slow

Reverse buttons to control disc playback. See Remote Control Functions, on page 9, for

more information about the functions of these buttons.

Playback Features

Repeat: When you are playing a Blu-ray Disc recording or DVD, pressing the Repeat

button cycles through the following repeat modes: Chapter, Title, All, Off. When you

are playing a CD, this button cycles through the following repeat modes: Track, All, Off.

NOTE: Not all Blue-ray Disc recordings allow repeat.

A-B: When you are playing a Blu-ray Disc recording, DVD or music CD, pressing the A-B

button places the player into the A-B repeat mode. The ﬁrst press sets the “A” repeat

point; the second press sets the “B” repeat point and begins repeating the section of

the disc between the two points. Pressing the A-B button while the player is in the A-B

repeat mode takes the player out of that mode. NOTE: Not all Blu-ray Disc recordings

allow A-B repeat.

Find: Pressing the Find button during disc playback activates the search function,

allowing you to jump to a speciﬁc location on the disc. You can ﬁnd a location by title,

chapter or time. See Find button, on page 9, for more information. NOTE: If you are

playing a disc that does not allow searching by title, use the disc menu to change titles.

Options: Pressing the Options button displays any available options for the disc that

is currently playing. Blu-ray Disc options include title, chapter, time display, audio

options, angle options, subtitle options, picture-in-picture options, second audio track

options, bitrate options, stillframe options, fast advance and scene replay. DVD options

include title, chapter, time display, playback modes, audio options, angle options, bitrate

options, stillframe options, fast advance and scene replay. Audio CD options include

track selection, time display, playback modes, bitrate, instant search and instant replay.

Display Button: When you are playing Blu-ray Disc recordings and DVDs, pressing the

Display button toggles the information bar on and off.

Audio

Mode

Playback

Mode

Disc Type

& Encoding

Current

Chapter

Time

Display

“Find”

Indicators

Current

Title

English Dolby Digital 5.1

MPEG 1 / 8 00 : 32 : 37

1/1

DVD-VIDEO

1 / 2

Top Menu Button: Displays the top menu for the Blu-ray Disc recording or DVD that is

currently playing. NOTE: This feature is disc-dependent. Not all DVDs have top menus. If

a DVD that you are playing has no top menu, pressing the Top Menu button may display

the disc menu, depending on how the disc’s menu system was authored.

Popup Button: Pressing this button while playing a Blu-ray Disc recording or DVD

displays the popup menu.

Bookmark Function: The bookmark function lets you mark up to 12 locations on the

disc that is currently playing. Press the Bookmark button to mark the current location

on the disc. To play the disc from one of your selected bookmark locations, hold the

Bookmark button, which will display the bookmark list. Use the Navigation Left/Right

buttons to select the desired bookmark, and press the OK button to play the disc from

that location.

NOTE: The bookmark function is disc-dependent. Not all discs allow bookmark operation.

Programmed Play: This option lets you create a programmed playlist for a disc that is

inserted in the BDT 3/BDT 30. The program function works for CDs, DVDs and

Blu-ray Disc recordings. NOTE: Not all Blu-ray Discs support programmed play.

1. Press the Program button. The Program screen will appear (CD program screen

is shown below).

Play Clear Stop

Track: 10

Track: 05

-- -- -- --

Page: 1/ Program

CD Track Total: 15

-- -- -- --

CLEAR EXIT

2. Press the OK button and use the Navigation Up/Down buttons to select the title on

the disc (Blu-ray Disc/DVD) or track (CD) for your ﬁrst program entry. NOTE: Not all

Blu-ray Disc recordings allow selection by title.

3. Press the Navigation Right button and use the Navigation Up/Down buttons to

select the chapter for your ﬁrst program entry (Blu-ray Disc/DVD only).

4. Repeat steps 2 – 3 for every entry in your programmed list.

5. When you’re ﬁnished programming your list, press the Play button to play the

programmed playlist.

BD-Live Interactivity

BD-Live interactivity is available on select Blu-ray Disc recordings. When you select the

BD-Live features from a disc’s menu, you may be able to download additional content or

other information via the Internet (through the Network connection) and onto a memory

device inserted into the BDT 3/BDT 30 USB port.

NOTE: Do not unplug the USB memory device while downloading BD-Live information. If

you do unplug the device and the Harman Kardon splash screen appears, press the Play

button to return to the beginning of the disc.

If you have difficulty accessing the Internet while using a BD-Live disc, press the

Settings button and navigate to the Network Setup menu. Select “Test Connection.”

If the BDT 3/BDT 30 is able to access the Internet, then the computer server that

the BD-Live disc is trying to access may be at fault. Check the disc jacket for more

information, or contact the online content provider. If the Test Connection function fails,

contact your Internet service provider (ISP) to obtain the correct settings for the BDT 3/

BDT 30’s IP Conﬁguration menu. If the problem persists, contact your ISP for further

assistance.

Playing Music CDs

When the BDT 3/BDT 30 is playing a music CD, the top bar shows the current playback

mode icon, the type of disc, the track currently playing, the number of total tracks on the

disc and the time display.

Playback

Mode

Disc

Type

Current

Track

Total

Tracks

Time

Display

00 : 32 : 37

CDDA

1 / 15

TRACK

BDT 3/BDT 30

Playing Files from USB Devices and CD Data Discs

Your BDT 3/BDT 30 can play MP3 (up to 320kbps bitrate) and AAC audio ﬁles; display

JPEG photos; and show MPEG 1 (layer 1), MPEG 2 (layers 2 and 3) and DivX

(3.x, 4.x,

5.x) audio/video ﬁles stored on a USB device or a CD data disc.

IMPORTANT: Only media in the FAT32 ﬁle system are compatible with the BDT 3/

BDT 30.

To access ﬁles on a device inserted into the player’s USB port, press the Home button

and select “USB” from the source list on the screen.

1 / 4 Exit Option

Type:USB

Size:595.375M

FS:FAT32

Home Menu

USB

Playlist

Settings

HOME

OPTIONS

Regardless of the device’s ﬁle structure, the screen will ﬁrst show three individual folders

named “Photo,” “Music” and “Video.” Select the type of media that you want to play

from these three folders.

1 / 3 Exit Option

Type:Folder

USB

Photo

Music

Video

HOME

OPTIONS

The screen will then show the device’s ﬁle structure. Selecting a folder will show all

of the selected type of media in the folder. If there are ﬁles of the selected type in the

device’s root directory, the screen will show them as well.

To move up one directory level, press the Cursor Left button or select the arrow folder.

Viewing Photos

In the top directory, select “Photo.” Select a folder containing photo ﬁles, and highlight

a photo ﬁle in the folder. A thumbnail of the highlighted photo will appear on the right

side of the screen.

01 / 31 Exit Option

Type:JPG

Size:0.241M

Resolution:720x524

USB

Sunset

Connie1

Connie2

Stadium

AB Stand 1

HOME

OPTIONS

Use these remote buttons while viewing photos:

Play Button: Press this button to begin a slide show that displays each photo ﬁle in the

current folder or directory level (starting with the highlighted JPEG) for 15 seconds in

order as they appear in the folder.

Pause Button: Press this button to freeze the current photo on the screen. Press the Play

button to resume the slide show.

Stop Button: Press this button to end the slide show and return to the directory.

Next/Step and Previous/Step Buttons: Press these buttons to skip to the next or

previous photo ﬁle in the slide show or directory.

Cursor Up Button: Press this button while a photo is displayed to rotate the image 180°.

Pressing this button while the directory list is displayed highlights the previous item in

the directory.

Cursor Down Button: Press this button while a photo is displayed to show a mirror-

image reﬂection of the image. Pressing this button while the directory list is displayed

highlights the next item in the directory.

Cursor Left Button: Press this button while a photo is displayed to rotate the image 90°

counterclockwise. Pressing this button while the directory list is displayed jumps to the

next higher directory level.

Cursor Right Button: Press this button while a photo is displayed to rotate the image

90° clockwise.

Options Button: Press this button while a photo is displayed to show the Options menu,

which gives you the following options:

File: Select a ﬁle to view.

Play Mode: View ﬁles in their normal order, in random order (until you press the Stop

button) or in shufﬂe order (the screen displays each image in the folder one time in

random order, then returns to the directory).

Slide Show: Select how long you want each image to be displayed: 5 seconds, 15 seconds

or 30 seconds.

Transition: Select from various types of image-to-image transitions.

Pressing the Options button when a directory is displayed shows the Playlist Options box.

See Using Playlists, on page 18, for more information.

ENGLISH

Thumbnail (yellow) Button: Press this button while playing a slide show to display

thumbnail images of all photos in the active directory. Use the Cursor and OK buttons to

highlight and select images to view.

1 / 25 PreviousMove Next

Zoom (blue) Button: Press this button during a slide show to freeze and zoom in 2x size

on the current image. Additional presses of the button change the zoom to 3x, 4x, 1/2x,

1/3x and 1/4x size.

Playing Music Files

In the top directory, select “Music.” Select a folder containing music ﬁles, and highlight

one of the ﬁles. Information about the highlighted ﬁle will appear on the right of the

screen.

01 / 10 Exit Option

Type:MP3

Total Time:03:29

Title:Beanwater Junction, Part 1

Artist:Jugalbandi

Album:Night Crazy

Genre:Progressive

USB

Beanwater Part 1

Laydown Delivery (Edit 1)

Madagascar Wombat

Night Crazy

The Lost Transit Center

HOME

OPTIONS

Selecting a music ﬁle plays the ﬁle. If other music ﬁles in the folder follow the selected

ﬁle, the BDT 3/BDT 30 will play each one in order as they appear on the on-screen

display. The following screen will appear while music ﬁles play:

Type: MP3

Total Time: 03:29

Title: Beanwater Junction, Part 1

Artist: Jugalbandi

Album: Night Crazy

Genre: Progressive

00 : 02 : 37

1 / 10

If a selected MP3 ﬁle has an album cover-art ID3 tag, the art will be displayed on the

screen.

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search/Slow Forward and Search/Slow

Reverse buttons to control music-ﬁle playback. See Remote Control Functions, on page

9, for more information about the functions of these buttons.

When the BDT 3/BDT 30 is playing music ﬁles from a USB device or CD data disc, the

Repeat and Options functions are slightly different from their functions when the unit is

playing Blu-ray Disc recordings, DVDs and music CDs:

Repeat Button: Pressing this button cycles through the following repeat modes:

1 (song), All (folder), Off. The active repeat mode is indicated in the screen’s top bar.

Options Button: Pressing this button displays any available options for the song that is

currently playing:

File: Directly selects a song to play – either the song currently playing or another song.

Time: Displays the track’s elapsed time or the track’s time remaining.

Play Mode: Plays songs in their normal order, in random order (until you press the Stop

button) or in shufﬂe order (plays each song in the folder one time in random order, then

returns to the directory).

Bitrate: Shows the bitrate of the song that is currently playing.

Advance: Performs a rapid audible search forward through the song.

Replay: Each press of the OK button jumps back ten seconds during play.

While playing music ﬁles from a USB device or data CD, you can also view photos that are

on the same medium. Press the Home button while a music ﬁle is playing, navigate to a

folder containing photo ﬁles, and select a photo ﬁle to begin a slide show.

Playing Files from USB Devices and CD Data Discs

BDT 3/BDT 30

Playing Files from USB Devices and CD Data Discs/Using Playlists

Playing Videos

In the top directory, select “Video.” Select a folder containing video ﬁles, and highlight a

video ﬁle in the active folder.

01 / 7 Exit Option

Type:MPEG

USB

Dodgers Sweep Yanks in ‘63

Koufax’s Perfect Game

Gagne Saves 84th Game

Krik Gibson’s Homer

Bums Champs in 1955

HOME

OPTIONS

The video will automatically play. If there are other video files in the folder, the

BDT 3/BDT 30 will play each of them in order as they appear on the on-screen menu.

Use the Play, Pause, Stop, Prev/Step, Next/Step, Search/Slow Forward and Search/Slow

Reverse buttons to control video-ﬁle playback. See Remote Control Functions, on page 9,

for more information about the functions of these buttons.

When the BDT 3/BDT 30 is playing video ﬁles from a USB device or CD data disc, the

Repeat and Options functions are slightly different from their functions when the unit is

playing Blu-ray Disc recordings and DVDs:

Repeat Button: Press this button to cycle through the following repeat modes:

1 (current video), All (folder), Off.

Options Button: Press this button to display any available options for the video that is

currently playing:

File: Directly selects a ﬁle to play.

Title: Directly selects a title to play (if available).

Chapter: Directly selects a chapter to play (if available).

Time: Displays the elapsed time or the time remaining.

Play Mode: Plays videos in their normal order, in random order (until you press the Stop

button) or in shufﬂe order (plays each video in the folder one time in random order, then

returns to the directory).

Audio: Selects audio options (if available).

Using Playlists

Because USB devices and CD-R data discs can contain large numbers of playable ﬁles,

you can create a playlist for each disc to help you to access selected ﬁles.

To Create a Playlist

NOTE: The procedure is the same for a CD-R playlist and a USB playlist.

1. Press the Home button. The Home menu will appear.

2. Select CD data disc or USB. The Photo, Music and Video folders will appear.

3. Select the type of ﬁle you want to create the playlist for. You can create a playlist for

each type of ﬁle.

4. Search through the directory structure. When you see a ﬁle that you want to include

in the playlist for that ﬁle type, highlight it and press the Options button. The playlist

options box will appear.

5. To add the item to the playlist, select “Add to Playlist.”

6. Repeat steps 4 – 5 for all items that you want to add to the playlist.

To create a playlist for a different ﬁle type, repeat steps 1 – 6; but in step 3, select a

different ﬁle type.

To Play a Playlist

1. Press the Home button. The Home menu will appear.

2. Select Playlist. The Photo/Music/Video screen will appear.

3. Select the ﬁle type of the playlist you want to play. The playlist will open.

4. Select the ﬁrst item in the playlist and press the Play button. The playlist will play.

5. To repeat the playlist, press the Repeat button. You can repeat one item (“1” on the

screen) or the entire playlist (“All”).

BDT 3/BDT 30

ENGLISH

Troubleshooting

If your BDT 3/BDT 30 isn’t performing the way you think it should, check to see if the problem is covered in this section before calling your dealer or contacting Harman Kardon

Customer Service.

Problem Solution

The player won’t power up (the Power indicator is not lit): • Check that the player’s AC power cord is properly plugged into the player’s Power

Cord connector.

• Check that the player’s AC power cord is plugged into a working AC outlet and that

the AC outlet is not controlled by a switch.

• Make sure that the Master Power switch (on the player’s rear panel) is in the “On”

position.

The disc does not play: • Check that the disc is inserted correctly (label side up).

• Check that the disc is the correct type: BD-Video (single-layer or double-layer),

DVD-Video, DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio), CD-R/RW. Other

disc types will not play.

No picture: • Check the connection between the player and the TV.

• Check that the TV is turned on and that it is set to the correct input source.

• Conﬁrm that all of the choices made in the Display Settings menu are correct for

your TV.

• Check that the TV is HDCP-compliant. The player cannot be used with a TV that is

not HDCP-compliant.

No sound: • Check that the HDMI and/or coaxial digital connections are properly made.

• If you’re using the coaxial digital connection, check that the digital audio settings on

the connected device have been properly set.

• If you’re using only the HDMI connection, check that the HDMI audio settings on the

connected device have been properly set.

• If you’re using only the HDMI connection, check that the BDT 3/BDT 30’s HDMI

Audio Output is set to “On.”

The picture appears in the wrong aspect ratio: • Change the Aspect Ratio setting in the Display Settings menu to match the TV.

There is noise or other interference in the picture while playing a Blu-ray Disc

recording or DVD:

• Check that the disc surface is clean and not scratched.

Cannot access media on a connected USB device: • Check that the device is formatted in the FAT32 ﬁle system. Other ﬁle systems are

not compatible with the BDT 3/BDT 30.

The player does not respond to remote-control commands: • Replace both remote-control batteries with fresh ones, and make sure that they are

installed correctly.

• Hold the remote control closer to the player.

• Check that the player’s remote sensor is in the remote control’s line of sight.

• Make sure that the protective shipping ﬁlm has been removed from the player’s

front panel.

The Ø symbol appears on the screen when you press a remote-control button: • The selected function is not permitted at the time you press the button.

The player does not respond to commands, or it behaves in an erratic way: • Unplug the player’s power cord from the AC outlet, wait 30 seconds, and plug it

back in.