Pioneer MVH-16UI Руководство пользователя

Black plate (1,1)

Owner’s Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

DIGITAL MEDIA RECEIVER

RECEPTEUR NUMERIQUE MULTIMEDIA

RICEVITORE MULTIMEDIALE DIGITALE

RECEPTOR DE MEDIOS DIGITALES

DIGITALER MEDIENEMPFÄNGER

DIGITALE MEDIA-RECEIVER

ЦИФРОВОЙ МЕДИАРЕСИВЕР

MVH-X360BT

MVH-160UI

<QRD3211-B>1

English NederlandsDeutschEspañolItalianoFrançais Русский

Black plate (2,1)

Thank you for purchasing this PIONEER

product

To ensure proper use, please read through this

manual before using this product. It is especially

important that you read and observe WARN-

INGs and CAUTIONs in this manual. Please

keep the manual in a safe and accessible place for

future reference.

If you want to dispose this product, do not

mix it with general household waste. There is

a separate collection system for used elec-

tronic products in accordance with legislation

that requires proper treatment, recovery and

recycling.

Private households in the member states of the

EU, in Switzerland and Norway may return their

used electronic products free of charge to desig-

nated collection facilities or to a retailer (if you

purchase a similar new one).

For countries not mentioned above, please con-

tact your local authorities for the correct method

of disposal.

By doing so you will ensure that your disposed

product undergoes the necessary treatment, re-

covery and recycling and thus prevent potential

negative effects on the environment and human

health.

About this unit

The tuner frequencies on this unit are allocated

for use in Western Europe, Asia, the Middle

East, Africa and Oceania. Use in other areas

may result in poor reception. The RDS (radio

data system) function only works in areas that

broadcast RDS signals for FM stations.

WARNING

! Do not attempt to install or service this

product by yourself. Installation or serv-

icing of this product by persons without

training and experience in electronic

equipment and automotive accessories

may be dangerous and could expose you

to the risk of electric shock, injury or

other hazards.

! Do not attempt to operate the unit while driv-

ing. Make sure to pull off the road and park

your vehicle in a safe location before at-

tempting to use the controls on the device.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with

liquids.

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Always keep the volume low enough to hear

outside sounds.

! Avoid exposure to moisture.

If you experience problems

Should this unit fail to work properly, please con-

tact your dealer or nearest authorized PIONEER

Service Station.

Before you start

2

Section

Before you start

En

01

<QRD3211-B>2

Black plate (3,1)

Head unit

b7 86

4

1 3 52

9 a c

1 SRC/OFF

2 MULTI-CONTROL (M.C.)

3

(list)

4 DISP

5 USB port

6

(phone)

MVH-X360BT

iPod

MVH-160UI

7 BAND/

(iPod control)

8

(back)/DIMMER (dimmer)

9 c/d

a 1/

to 6/

b AUX input jack (3.5 mm stereo jack)

c Detach button

CAUTION

Use an optional Pioneer USB cable (CD-U50E)

to connect the USB storage device as any device

connected directly to the unit will protrude out

from the unit, which could be dangerous.

Display indication

31 4 86

db

2 5 7 9

a

c

1 (list)

2

(iPod control)

This unit’s iPod function is operated from

your iPod.

3 Sub information section

4 TA (traffic announcements)

5 TP (traffic program identification)

6

(sound retriever)

7 LOC (local seek tuning)

8

(repeat)

9

(random/shuffle)

a

(auto answer)

Only for MVH-X360BT

Shows when the automatic answering func-

tion is on.

b

Main information section

! Tuner: band and frequency

! RDS: program service name, PTY infor-

mation and other literal information

! USB storage device and iPod: elapsed

playback time and text information

c

(Bluetooth indicator)

Only for MVH-X360BT

d

Appears when a lower tier of folder or menu

exists.

Set up menu

1 After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

2 Turn M.C. to switch to YES.

# If you do not use the unit for 30 seconds, the set

up menu will not be displayed.

# If you prefer not to set up at this time, turn M.C.

to switch to NO.

3 Press M.C. to select.

4 Follow these steps to set the menu.

To proceed to the next menu option, you need to

confirm your selection.

LANGUAGE (multi-language)

This unit can display the text information from a

compressed audio file even for information em-

bedded in English, Russian or Turkish.

! If the embedded language and the selected

language setting are not the same, text infor-

mation may not display properly.

! Some characters may not be displayed prop-

erly.

1 Turn M.C. to select the desired setting.

ENG (English)—РУС (Russian)—TUR (Turk-

ish)

2 Press M.C. to confirm the selection.

CLOCK SET (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

FM STEP (FM tuning step)

Use FM STEP to set FM tuning step options (seek

step settings).

1 Turn M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

2 Press M.C. to confirm the selection.

QUIT appears.

! The manual tuning step is fixed at 50 kHz.

! When AF and TA are turned off, the seek step

is fixed at 50 kHz even if set to 100.

5 To finish your settings, turn M.C. to select

YES.

# If you prefer to change your setting again, turn

M.C. to switch to NO.

6 Press M.C. to select.

Notes

! You can set up the menu options from the

system menu and initial menu. For details

about the settings, refer to System menu on

page 12 and Initial menu on page 13.

! You can cancel set up menu by pressing

SRC/OFF.

Basic operations

Important

! Handle the front panel with care when re-

moving or attaching it.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight

and high temperatures.

! To avoid damaging the device or vehicle inte-

rior, remove any cables and devices attached

to the front panel before detaching it.

English

Using this unit

3

Section

Using this unit

En

02

<QRD3211-B>3

Black plate (4,1)

Removing the front panel

1 Press the detach button to release the front

panel.

2 Push the front panel upward (M) and then pull

it toward (N) you.

3 Always store the detached front panel in a pro-

tective case or bag.

Re-attaching the front panel

1 Slide the front panel to the left.

2 Press the right side of the front panel until it is

firmly seated.

Forcing the front panel into place may result in

damage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press and hold SRC/OFF until the unit turns

off.

Selecting a source

1 Press SRC/OFF to cycle between:

RADIO—USB/iPod—APP (application)—AUX

—BT AUDIO

! USB MTP displays while the MTP connection

is in use.

! Only for MVH-160UI

When there is an iPod connected and a source

other than iPod is selected, you can switch to

iPod by pressing iPod.

! BT AUDIO is not available for MVH-160UI.

Adjusting the volume

1 Turn M.C. to adjust the volume.

Note

When this unit’s blue/white lead is connected to

the vehicle’s auto-antenna relay control termi-

nal, the vehicle’s antenna extends when this

unit’s source is turned on. To retract the anten-

na, turn the source off.

Frequently used menu

operations

Returning to the previous display

Returning to the previous list (the folder one level

higher)

1 Press

/DIMMER.

Returning to the ordinary display

Canceling the main menu

1 Press BAND/

.

Returning to the ordinary display from the list

1 Press BAND/

.

Radio

Basic operations

Selecting a band

1 Press BAND/

until the desired band (FM1,

FM2,FM3 for FM or MW/LW) is displayed.

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function.

Manual tuning (step by step)

1 Press c or d.

! Select MAN (manual tuning) under SEEK to

use this function.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

you release c or d.

Notes

! For details about SEEK, refer to SEEK (left/

right key setting) on page 5.

! This unit’s AF (alternative frequencies

search) function can be turned on and off.

AF should be off for normal tuning operation

(refer to AF (alternative frequencies search)

on page 5).

Storing and recalling stations

for each band

Using preset tuning buttons

1 To store: Press and hold down one of the

preset tuning buttons (1/

to 6/ ) until

the number stops flashing.

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or

frequency)

! BRDCST INFO (program service name/PTY

information)

! CLOCK (source name and clock)

Notes

! If the program service name cannot be ac-

quired in FREQUENCY, the broadcast fre-

quency is displayed instead. If the program

service name is detected, the program serv-

ice name will be displayed.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Using PTY functions

You can tune in to a station using PTY (program

type) information.

Searching for an RDS station by PTY information

1 Press

(list).

2 Turn M.C. to select a program type.

NEWS/INFO—POPULAR—CLASSICS—

OTHERS

3 Press M.C. to begin the search.

The unit searches for a station broadcasting

that type of program. When a station is found,

its program service name is displayed.

! To cancel the search, press M.C. again.

! The program of some stations may differ

from that indicated by the transmitted PTY.

! If no station is broadcasting the type of

program you searched for, NOT FOUND is

displayed for about two seconds and then

the tuner returns to the original station.

Using this unit

4

Section

Using this unit

En

02

<QRD3211-B>4

Black plate (5,1)

PTY list

For more details about PTY list, visit the follow-

ing site:

http://www.pioneer.eu/eur/products/25/121/tech/

CarAudio/PTY.html

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

# If MW/LW band is selected, only BSM, LOCAL

and SEEK are available.

FM SETTING (FM sound quality settings)

The sound quality level can be set to match the

broadcast signal conditions of the FM band sig-

nal.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! STANDARD – This is the standard setting.

! HI-FI – This is the setting to use to prioritize

the high quality of stereo sound.

! STABLE – This is the setting to use to priori-

tize the low noise of monaural sound.

BSM (best stations memory)

BSM (best stations memory) automatically stores

the six strongest stations in the order of their sig-

nal strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

REGIONAL (regional)

When AF is used, the regional function limits the

selection of stations to those broadcasting region-

al programs.

1 Press M.C. to turn the regional function on or

off.

LOCAL (local seek tuning)

Local seek tuning allows you to tune in to only

those radio stations with sufficiently strong sig-

nals for good reception.

1 Press M.C. to select the desired setting.

FM: OFF—LV1—LV2—LV3—LV4

MW/LW: OFF—LV1—LV2

The highest level setting allows reception of

only the strongest stations, while lower levels

allow the reception of weaker stations.

TA (traffic announcement standby)

1 Press M.C. to turn traffic announcement

standby on or off.

AF (alternative frequencies search)

1 Press M.C. to turn AF on or off.

NEWS (news program interruption)

1 Press M.C. to turn the NEWS function on or

off.

SEEK (left/right key setting)

You can assign a function to the left and right keys

of the unit.

Select MAN (manual tuning) to tune up or down

manually or select PCH (preset channel) to switch

between preset channels.

1 Press M.C. to select MAN or PCH.

USB storage device

MTP connection

MTP-compatible Android devices (running

Android OS 4.0 or higher) can be connected by

MTP connection using the USB source. To con-

nect an Android device, use the cable that came

with the device.

Notes

! This function is not compatible with MIX-

TRAX.

! This function is not compatible with WAV.

Basic operations

Playing songs on a USB storage device

1 Open the USB port cover.

2 Plug in the USB storage device using a USB

cable.

Stopping playback of files on a USB storage de-

vice

1 You may disconnect the USB storage device at

any time.

Selecting a folder

1 Press 1/

or 2/ .

Selecting a track

1 Press c or d.

Fast forwarding or reversing

1 Press and hold c or d.

! When playing compressed audio, there is no

sound during fast forward or reverse.

Returning to root folder

1 Press and hold BAND/

.

Switching between playback memor y devices

You can switch between playback memory devices

on USB storage devices with more than one Mass

Storage Device-compatible memory device.

1 Press BAND/

.

! You can switch between up to 32 different

memory devices.

Note

Disconnect USB storage devices from the unit

when not in use.

Operations using the MIXTRAX

button

Turning MIXTRAX on or off

Only for MVH-X360BT

You cannot use this function with USB MTP.

1 Press 3/MIX to turn MIXTRAX on or off.

! For more details about MIXTRAX, refer to

About MIXTRAX on page 13.

! When MIXTRAX is in use, the sound retriever

function is disabled.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

MP3/WMA/WAV

! TRACK INFO (track title/artist name/album

title)

! FILE INFO (file name/folder name)

! ELAPSED TIME (track number and play-

back time)

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

English

Using this unit

5

Section

Using this unit

En

02

<QRD3211-B>5

Black plate (6,1)

Selecting and playing files/

tracks from the name list

1 Press to switch to the file/track name

list mode.

2 Use M.C. to select the desired file name

(or folder name).

Selecting a file or folder

1 Turn M.C.

Playing

1 When a file or track is selected, press M.C.

Viewing a list of the files (or folders) in the se-

lected folder

1 When a folder is selected, press M.C.

Playing a song in the selected folder

1 When a folder is selected, press and hold M.C.

Operations using special buttons

Selecting a repeat play range

1 Press 6/

to cycle between the following:

! ALL – Repeat all files

! ONE – Repeat the current file

! FLD – Repeat the current folder

Playing tracks in random order

1 Press 5/

to turn random play on or off.

Tracks in a selected repeat range are played in

random order.

! To change songs during random play, press d

to switch to the next track. Pressing c restarts

playback of the current track from the begin-

ning of the song.

Pausing playback

1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich

sound (sound retriever)

Only for MVH-160UI

1 Press 3/S.Rtrv to cycle between:

1—2—OFF (off)

1 is effective for low compression rates, and 2

is effective for high compression rates.

! Key operation is disabled when MIXTRAX is

on.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

Once selected, the function below can be ad-

justed.

! S.RTRV is not available when MIXTRAX is

turned on.

S.RTRV (sound retriever)

Automatically enhances compressed audio and

restores rich sound.

1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed

audio and restoring rich sound (sound retriever)

on page 6.

iPod

Basic operations

Playing songs on an iPod

1 Open the USB port cover.

2 Connect an iPod to USB input.

Playback is performed automatically.

Selecting a song (chapter)

1 Press c or d.

Selecting an album

1 Press 1/

or 2/ .

Fast forwarding or reversing

1 Press and hold c or d.

Notes

! The iPod cannot be turned on or off when the

control mode is set to CTRL AUDIO.

! Disconnect headphones from the iPod be-

fore connecting it to this unit.

! The iPod will turn off about two minutes after

the ignition is switched off.

Operations using the MIXTRAX

button

Turning MIXTRAX on or off

Only for MVH-X360BT

1 Press 3/MIX to turn MIXTRAX on or off.

! For more details about MIXTRAX, refer to

About MIXTRAX on page 13.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! TRACK INFO (track title/artist name/album

title)

! ELAPSED TIME (track number and play-

back time)

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

Browsing for a song

1 Press to switch to the top menu of list

search.

2 Use M.C. to select a category/song.

Changing the name of the song or category

1 Turn M.C.

Playlists—artists—albums—songs—podcasts

—genres—composers—audiobooks

Playing

1 When a song is selected, press M.C.

Viewing a list of songs in the selected category

1 When a category is selected, press M.C.

Playing a song in the selected category

1 When a category is selected, press and hold

M.C.

Searching the list by alphabet

1 When a list for the selected category is dis-

played, press

to switch to alphabet search

mode.

! You also can switch to alphabet search

mode by turning M.C. twice.

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

! To cancel searching, press

/DIMMER.

Using this unit

6

Section

Using this unit

En

02

<QRD3211-B>6

Black plate (7,1)

Notes

! You can play playlists created with the com-

puter application (MusicSphere). The appli-

cation will be available on our website.

! Playlists that you created with the computer

application (MusicSphere) are displayed in

abbreviated form.

Operations using special buttons

Selecting a repeat play range

1 Press 6/

to cycle between the following:

! ONE – Repeat the current song

! ALL – Repeat all songs in the selected list

! When the control mode is set to CTRL iPod,

the repeat play range will be same as what is

set for the connected iPod.

Selecting a random play range (shuffle)

1 Press 5/

to cycle between the following:

! SNG – Play back songs in the selected list

in random order.

! ALB – Play back songs from a randomly se-

lected album in order.

! OFF – Not play back in random order.

Playing all songs in random order (shuffle all)

1 Press and hold 5/

to turn shuffle all on.

! To turn off shuffle all, select OFF in shuffle. For

details, refer to Selecting a random play range

(shuffle) on page 7.

Pausing playback

1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich

sound (sound retriever)

Only for MVH-160UI

1 Press 3/S.Rtrv to cycle between:

1—2—OFF (off)

1 is effective for low compression rates, and 2

is effective for high compression rates.

Playing songs related to the

currently playing song

You can play songs from the following lists.

• Album list of the currently playing artist

• Song list of the currently playing album

• Album list of the currently playing genre

1 Press and hold

to switch to link play

mode.

2 Turn M.C. to change the mode; press to

select.

! ARTIST – Plays an album by the artist cur-

rently playing.

! ALBUM – Plays a song from the album cur-

rently being played.

! GENRE – Plays an album from the genre cur-

rently being played.

The selected song/album will be played after the

currently playing song.

Notes

! The selected song/album may be canceled if

you use functions other than link search (e.g.

fast forward and reverse).

! Depending on the song selected to play, the

end of the currently playing song and the be-

ginning of the selected song/album may be

cut off.

Using this unit’s iPod function

from your iPod

This unit’s iPod function can be controlled by

using the connected iPod.

CTRL iPod is not compatible with the following

iPod models.

! iPod nano 1st generation

! iPod with video

% Press BAND/

to switch the control

mode.

! CTRL iPod – This unit’s iPod function can be

operated from the connected iPod.

! CTRL AUDIO – This unit’s iPod function can

be controlled by using this unit.

Only for MVH-160UI

You can also switch the control mode by press-

ing iPod.

Notes

! Switching the control mode to CTRL iPod

pauses song playback. Use the iPod to re-

sume playback.

! The following operations are still accessible

from the unit even if the control mode is set

to CTRL iPod.

— Pausing

— Fast forward/reverse

— Selecting a song (chapter)

! The volume can only be adjusted from this

unit.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

! AUDIO BOOK is not available when

CTRL iPod is selected in the control mode.

For details, refer to Using this unit’s iPod func-

tion from your iPod on page 7.

AUDIO BOOK (audiobook speed)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select your favorite setting.

! FASTER – Playback at a speed faster than

normal

! NORMAL – Playback at normal speed

! SLOWER – Playback at a speed slower

than normal

S.RTRV (sound retriever)

1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed

audio and restoring rich sound (sound retriever)

on page 7.

Using connected device

applications

You can use this unit to perform streaming play-

back of and control tracks in iPhone or smart-

phone applications or just for streaming

playback.

Important

Use of third party apps may involve or require

the provision of personally identifiable infor-

mation, whether through the creation of a

user account or otherwise, and for certain ap-

plications, the provision of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RE-

SPONSIBILITY OF THE PROVIDERS, INCLUD-

ING WITHOUT LIMITATION COLLECTION AND

SECURITY OF USER DATA AND PRIVACY

PRACTICES. BY ACCESSING THIRD PARTY

APPS, YOU AGREE TO REVIEW THE TERMS

OF SERVICE AND PRIVACY POLICIES OF THE

PROVIDERS. IF YOU DO NOT AGREE WITH

THE TERMS OR POLICIES OF ANY PROVIDER

OR DO NOT CONSENT TO THE USE OF GEO-

LOCATION DATA WHERE APPLICABLE, DO

NOT USE THAT THIRD PARTY APP.

Information for compatibility of

connected devices

The following is the detailed information regard-

ing the terminals required to use the application

for iPhone or smartphone on this unit.

English

Using this unit

7

Section

Using this unit

En

02

<QRD3211-B>7

Black plate (8,1)

For iPhone users

! This function is compatible with iPhone and

iPod touch.

! The device has iOS 5.0 or higher.

For smartphone users

! The device has Android OS 2.3 or later.

! The device supports Bluetooth SPP (Serial

Port Profile) and A2DP (Advanced Audio Dis-

tribution Profile).

The device is connected to this unit via

Bluetooth.

! Compatibility with all Android devices is not

guaranteed.

For details about Android device compatibil-

ity with this unit, refer to the information on

our website.

Notes

! Please check our website for a list of sup-

ported iPhone or smartphone applications

for this unit.

! Pioneer is not liable for any issues that may

arise from incorrect or flawed app-based

content.

! The content and functionality of the sup-

ported applications are the responsibility of

the App providers.

Starting procedure for iPhone users

1 Connect an iPhone to USB input.

2 Select WIRED in APP CONN. SET. For de-

tails, refer to APP CONN. SET (APP connect

mode setting) on page 13.

If using MVH-160UI, proceed to the next step.

3 Switch the source to APP.

4 Start up the application on the iPhone

and initiate playback.

Starting procedure for

smartphone users

Only for MVH-X360BT

1 Connect your smartphone to this unit

using Bluetooth wireless technology. For de-

tails, refer to Connection menu operation on

page 9.

2 Select BLUETOOTH in APP CONN. SET. For

details, refer to APP CONN. SET (APP connect

mode setting) on page 13.

3 Switch the source to APP.

4 Start up the application on the smart-

phone and initiate playback.

Basic operations

Selecting a track

1 Press c or d.

Fast forwarding or reversing

1 Press and hold c or d.

Pausing playback

1 Press BAND/

to pause or resume.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! TRACK INFO (track title/artist name/album

title)

! APP NAME (application name)

! ELAPSED TIME (playback time)

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

PAUSE (pause)

1 Press M.C. to pause or resume.

S.RTRV (sound retriever)

1 Press M.C. to select the desired setting.

1—2—OFF (off)

1 is effective for low compression rates, and 2

is effective for high compression rates.

Using Bluetooth wireless

technology

Only for MVH-X360BT

Using the Bluetooth telephone

Important

! Leaving the unit on standby to connect to

your phone via Bluetooth while the engine is

not running can drain the battery.

! Operations may vary depending on the kind

of cellular phone.

! Advanced operations that require attention

such as dialing numbers on the monitor,

using the phone book, etc., are prohibited

while driving. Be sure to park your vehicle in

a safe place and apply the parking brake be-

fore proceeding.

Setting up for hands-free phoning

1 Connection

Use the Bluetooth telephone connection

menu. Refer to Connection menu operation on

page 9.

2 Function settings

Use the Bluetooth telephone function menu.

Refer to Phone menu operation on page 10.

Basic operations

Making a phone call

1 Refer to Phone menu operation on page 10.

Answering an incoming call

1 When a call is received, press

.

Ending a call

1 Press

.

Rejecting an incoming call

1 When a call is received, press and hold

.

Answering a call waiting

1 When a call is received, press

.

Switching between callers on hold

1 Press M.C.

Canceling call waiting

1 Press and hold

.

Adjusting the other party’s listening volume

1 Press c or d while talking on the phone.

! When private mode is on, this function is not

available.

Turning private mode on or off

1 Press BAND/

while talking on the phone.

Note

If private mode is selected on the cellular phone,

hands-free phoning may not be available.

Using this unit

8

Section

Using this unit

En

02

<QRD3211-B>8

Black plate (9,1)

Storing and recalling phone numbers

1 To store: Press and hold down one of the

preset tuning buttons (1/

to 6/ ).

The functions below can be used to store phone

numbers to the memory. For details, refer to

Phone menu operation on page 10.

! MISSED (missed call history)

! DIALLED (dialed call history)

! RECEIVED (received call history)

! PHONE BOOK (phone book)

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

3 Press M.C. to make a call.

Switching the display

Selecting the desired text information

You can change the display during a call.

1 Press DISP to cycle between the following:

! Call time

! Name of other party

! Number of other party

Using voice recognition

This feature can be used on an iPhone equipped

with voice recognition that is connected by

Bluetooth.

1 Press and hold M.C. to switch to voice

recognition mode.

2 Press M.C. and then talk into the micro-

phone to input voice commands.

To end voice recognition mode, press BAND/

.

Notes

! For details on voice recognition features,

check the manual for your iPhone.

! In order for your voice commands to be rec-

ognized and interpreted correctly, ensure

that conditions are suitable for recognition.

! Please note that wind blowing through the

vehicle windows and noise coming from out-

side the vehicle can interfere with voice com-

mand operation.

! For optimum pick-up, the microphone should

be placed directly in front of the driver at a

suitable distance.

! Speaking too soon after the start of the com-

mand may cause voice recognition to fail.

! Speak slowly, deliberately, and clearly.

Connection menu operation

Important

Connected devices may not work properly if

more than one Bluetooth device is connected at

a time (e.g. a phone and a separate audio player

are connected simultaneously).

1 Press and hold

to display the connec-

tion menu.

# You cannot perform this step during a call.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

DEVICELIST (connecting or disconnecting a de-

vice from the device list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to connect/disconnect.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect/disconnect the selected

device.

If the connection is established, * is indicated

on the device name.

! When no device is selected in the device list,

this function is not available.

DEL DEVICE (deleting a device from the device

list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you

want to delete.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to display DELETE YES.

4 Press M.C. to delete the device information

from the device list.

! When no device is selected in the device list,

this function is not available.

! While this function is in use, do not turn off

the engine.

ADD DEVICE (connecting a new device)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, NOT FOUND is displayed.

2 Turn M.C. to select a device from the device

list.

! If the desired device is not displayed, select

RE-SEARCH.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the de-

vice name (Pioneer BT Unit) and enter the

PIN code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

! A 6-digit number may display on both this

unit and the Bluetooth device.

Select yes if the 6-digit numbers displayed

on this unit and the Bluetooth device are

the same.

! 6-digit number appears on the display of

this unit. Once the connection is estab-

lished, this number disappears.

! If you are unable to complete the connec-

tion using this unit, use the device to con-

nect to the unit.

! If three devices are already paired, DEVICE-

FULL is displayed and it is not possible to

perform this operation. In this case, delete

a paired device first.

A. CONN (connecting to a Bluetooth device auto-

matically)

1 Press M.C. to turn automatic connection on or

off.

VISIBLE (setting the visibility of this unit)

English

Using this unit

9

Section

Using this unit

En

02

<QRD3211-B>9

Black plate (10,1)

Bluetooth visibility can be turned on so that other

devices can discover the unit.

1 Press M.C. to turn the visibility of this unit on

or off.

PIN CODE (PIN code input)

You must enter a PIN code on your device to con-

firm the Bluetooth connection. The default code is

0000, but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you

to the PIN code input display, and you can

change the PIN code.

DEV. INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Turn M.C. to display the device information.

Device name—Bluetooth device address

GUEST MODE (guest mode)

When this mode is turned on, if a pairing is at-

tempted while there are already three devices

paired together, the unit will move to the DEL DE-

VICE screen automatically and prompt you to de-

lete a device. For details, refer to DEL DEVICE

(deleting a device from the device list) on page 9.

1 Press M.C. to turn the guest mode on or off.

A. PAIRING (auto pairing)

If this function is turned on while there is an

iPhone connected to the unit by USB, you will be

automatically prompted to pair the unit and

iPhone.

1 Press M.C. to turn auto pairing on or off.

! This function may not be available depending

on what version of iOS you are using.

Phone menu operation

1 Press to display the phone menu.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

MISSED (missed call history)

DIALLED (dialed call history)

RECEIVED (received call history)

1 Press M.C. to display the phone number list.

2 Turn M.C. to select a name or phone number.

3 Press M.C. to make a call.

PHONE BOOK (phone book)

The contacts on your phone will normally be trans-

ferred automatically when the phone is con-

nected. If it is not, use your phone menu to

transfer the contacts. The visibility of this unit

should be on when you use the phone menu.

Refer to VISIBLE (setting the visibility of this unit)

on page 9.

1 Press M.C. to display SEARCH (alphabetical

list).

2 Turn M.C. to select the first letter of the name

you are looking for.

! Press and hold M.C. to select the desired

character type.

TOP (alphabet)–ΟΛΑ (Greek alphabet)–-

ВСЕ (Cyrillic alphabet)

3 Press M.C. to display a registered name list.

4 Turn M.C. to select the name you are looking

for.

5 Press M.C. to display the phone number list.

6 Turn M.C. to select a phone number you want

to call.

7 Press M.C. to make a call.

PRESET 1-6 (preset phone numbers)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired preset number.

3 Press M.C. to make a call.

! You can also use the preset number buttons 1/

to 6/ to recall a preset phone number.

For more details about storing phone num-

bers, refer to Storing and recalling phone num-

bers on page 9.

PHONE FUNC (phone function)

You can set A. ANSR, R.TONE and PB INVT from

this menu. For details, refer to Function and opera-

tion on page 10.

Function and operation

1 Display PHONE FUNC.

Refer to PHONE FUNC (phone function) on page

10.

2 Press M.C. to display the function menu.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

A. ANSR (automatic answering)

1 Press M.C. to turn automatic answering on or

off.

R.TONE (ring tone select)

1 Press M.C. to turn the ring tone on or off.

PB INVT (phone book name view)

1 Press M.C. to invert the order of names in the

phone book.

Bluetooth Audio

Important

! Depending on the Bluetooth audio player

connected to this unit, the available opera-

tions will be limited to the following two lev-

els:

— A2DP profile (Advanced Audio Distribution

Profile): You can only playback songs on your

audio player.

The A2DP connection can only be used with

APP (smartphone) and BT AUDIO.

— AVRCP profile (Audio/Video Remote Control

Profile): You can per form playback, pause

playback, select songs, etc.

! To use a Bluetooth audio player with this

unit, refer to this manual and the manual for

your device for operating instructions.

! As the signal from your cellular phone may

cause noise, avoid using it when you are lis-

tening to songs on your Bluetooth audio

player.

! The sound of the Bluetooth audio player will

be muted when the phone is in use.

! When the Bluetooth audio player is in use,

you cannot connect to a Bluetooth telephone

automatically.

! Playback continues even if you switch from

your Bluetooth audio player to another

source while listening to a song.

! Depending on the type of Bluetooth audio

player you have connected to this unit, oper-

ation and information display may not be

available for some functions.

Setting up for Bluetooth audio

Before you can use the Bluetooth audio function

you must set up the unit for use with your

Bluetooth audio player. You will need to pair this

unit with your Bluetooth audio player.

Using this unit

10

Section

Using this unit

En

02

<QRD3211-B>10

Black plate (11,1)

1 Connection

Use the Bluetooth telephone connection

menu. Refer to Connection menu operation on

page 9.

Basic operations

Fast forwarding or reversing

1 Press and hold c or d.

Selecting a track

1 Press c or d.

Starting playback

1 Press BAND/

.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! DEVICE INFO (device name)

! TRACK INFO (track title/artist name/album

title)

! ELAPSED TIME (track number and play-

back time)

! CLOCK (source name and clock)

! SPEANA (spectrum analyzer)

Operations using special buttons

Selecting a repeat play range

1 Press 6/

to select a repeat play range from

one or all.

! This function may not be available depend-

ing on the type of Bluetooth audio player

connected.

! The repeat play range varies depending on

the Bluetooth audio player in use.

Playing tracks in random order

1 Press 5/

to turn random play on or off.

! The random play range varies depending

on the Bluetooth audio player in use.

Pausing playback

1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich

sound (sound retriever)

Only for MVH-160UI

1 Press 3/S.Rtrv to cycle between:

1—2—OFF (off)

1 is effective for low compression rates, and 2

is effective for high compression rates.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

PLAY (play)

1 Press M.C. to start playback.

STOP (stop)

1 Press M.C. to stop the playback.

S.RTRV (sound retriever)

1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed

audio and restoring rich sound (sound retriever)

on page 11.

Audio adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

Once selected, the following audio functions

can be adjusted.

! FADER is not available when SUB.W/SUB.W

is selected in SP-P/O MODE. For details, refer

to SP-P/O MODE (rear output and preout set-

ting) on page 13.

! SUB.W and SUB.W CTRL are not available

when REAR/REAR is selected in

SP-P/O MODE. For details, refer to

SP-P/O MODE (rear output and preout set-

ting) on page 13.

! SUB.W CTRL is not available when SUB.W is

selected in OFF. For details, refer to SUB.W

(subwoofer on/off setting) on page 11.

! SLA is not available when FM is selected as

the source.

FADER (fader adjustment)

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the front/rear speaker bal-

ance.

BALANCE (balance adjustment)

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the left/right speaker bal-

ance.

EQ SETTING (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

POWERFUL—NATURAL—VOCAL—CUS-

TOM1—CUSTOM2—FLAT—SUPER BASS

The equalizer band and equalizer level can be

customized when CUSTOM1 or CUSTOM2 is

selected.

If selecting CUSTOM1 or CUSTOM2, complete

the procedures outlined below. If selecting

other options, press M.C. to return to the pre-

vious display.

! CUSTOM1 can be set separately for each

source. However, each of the below combi-

nations are set to the same setting auto-

matically.

! USB, iPod and APP (iPhone)

! BT AUDIO and APP (smartphone)

! CUSTOM2 is a shared setting used in com-

mon for all sources.

3 Press M.C. to display the setting mode.

4 Press M.C. to cycle between the following:

Equalizer band—Equalizer level

5 Turn M.C. to select the desired setting.

Equalizer band: 80HZ—250HZ—800HZ—

2.5KHZ—8KHZ

Equalizer level: +6 to –6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

frequency and high-frequency ranges at low vol-

ume.

1 Press M.C. to select the desired setting.

OFF (off)—LOW (low)—MID (mid)—HI (high)

SUB.W (subwoofer on/off setting)

This unit is equipped with a subwoofer output

which can be turned on or off.

1 Press M.C. to select the desired setting.

NOR (normal phase)—REV (reverse phase)—

OFF (subwoofer off)

SUB.W CTRL (subwoofer adjustment)

English

Using this unit

11

Section

Using this unit

En

02

<QRD3211-B>11

Black plate (12,1)

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Cut-off frequency—Output level—Slope level

Rates that can be adjusted will flash.

3 Turn M.C. to select the desired setting.

Cut-off frequency: 50HZ—63HZ—80HZ—

100HZ—125HZ—160HZ—200HZ

Output level: –24 to +6

Slope level: –12— –24

BASS BOOST (bass boost)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

HPF SETTING (high pass filter adjustment)

Use this function when wanting to listen only to

high-frequency sounds. Only frequencies higher

than the high-pass filter (HPF) cutoff are output

from the speakers.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Cut-off frequency—Slope level

3 Turn M.C. to select the desired setting.

Cut-off frequency: OFF—50HZ—63HZ—80HZ

—100HZ—125HZ—160HZ—200HZ

Slope level: –12— –24

SLA (source level adjustment)

This function prevents the volume from changing

too dramatically when the source switches.

! Settings are based on the FM volume level,

which remains unchanged.

! The MW/LW volume level can also be adjusted

with this function.

! Each of the below combinations are set to the

same setting automatically.

! USB, iPod and APP (iPhone)

! BT AUDIO and APP (smartphone)

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

System menu

Important

PW SAVE (power saving) is canceled if the ve-

hicle battery is disconnected and will need to be

turned back on once the battery is reconnected.

When PW SAVE (power saving) is off, depend-

ing on connection methods, the unit may con-

tinue to draw power from the battery if your

vehicle’s ignition doesn’t have an ACC (acces-

sory) position.

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select SYSTEM.

3 Turn M.C. to select the system menu

function.

Once selected, the following system menu func-

tions can be adjusted.

! MUTE MODE is not available for MVH-

X360BT.

! BT AUDIO, BT MEM CLEAR, BT VERSION

and APP CONN. SET are not available for

MVH-160UI.

LANGUAGE (multi-language)

This unit can display the text information from a

compressed audio file even for information em-

bedded in English, Russian or Turkish.

! If the embedded language and the selected

language setting are not the same, text infor-

mation may not display properly.

! Some characters may not be displayed prop-

erly.

1 Press M.C. to select the desired setting.

ENG (English)—РУС (Russian)—TUR (Turk-

ish)

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock

display you wish to set.

Hour—Minute

3 Turn M.C. to adjust the clock.

12H/24H (time notation)

1 Press M.C. to select the desired setting.

12H (12-hour clock)—24H (24-hour clock)

AUTO PI (auto PI seek)

The unit can automatically search for a different

station with the same programming, even during

preset recall.

1 Press M.C. to turn Auto PI seek on or off.

AUX (auxiliary input)

Activate this setting when using an auxiliary de-

vice connected to this unit.

1 Press M.C. to turn AUX on or off.

DIMMER (dimmer)

1 Press M.C. to turn the dimmer on or off.

! You can also change the dimmer setting by

pressing and holding

/DIMMER.

MUTE MODE (mute mode)

Sound from this system is automatically muted or

attenuated when a signal from equipment with a

mute function is received.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! MUTE – Muting

! 20dB ATT – Attenuation (20dB ATT has a

stronger effect than 10dB ATT)

! 10dB ATT – Attenuation

BT AUDIO (Bluetooth audio activation)

You need to activate the BT AUDIO source in order

to use a Bluetooth audio player.

1 Press M.C. to turn the BT AUDIO source on or

off.

PW SAVE (power saving)

Switching this function on enables you to reduce

the consumption of battery power.

! Turning on the source is the only operation al-

lowed when this function is on.

1 Press M.C. to turn the power save on or off.

BT MEM CLEAR (clearing the Bluetooth device

data stored on this unit)

Bluetooth device data stored on this unit can be

cleared. To protect your personal information,

clear the device memory before you pass the unit

on to someone else. The following information will

be deleted.

Device list/PIN code/call history/phone book/pre-

set phone numbers

1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on

standby.

If you do not want to clear the Bluetooth device

data stored on this unit, turn M.C. to display

CANCEL and press it again to select.

2 Press M.C. to clear the memory.

CLEARED is displayed and the Bluetooth de-

vice data is cleared.

! While this function is in use, do not turn off

the engine.

Using this unit

12

Section

Using this unit

En

02

<QRD3211-B>12

Black plate (13,1)

BT VERSION (Bluetooth version display)

You can display the system versions of this unit

and of Bluetooth module.

1 Press M.C. to display the information.

APP CONN. SET (APP connect mode setting)

Select an appropriate option for your connected

device.

1 Press M.C. to select the desired setting.

WIRED (for iPhone)—BLUETOOTH (for smart-

phone)

! This setting is not available when the source is

set to APP.

About MIXTRAX

Only for MVH-X360BT

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual effects.

Notes

! Depending on the file/song, sound effects

may not be available.

! Turn MIXTRAX off if the visual effects it pro-

duces have adverse effects on driving. Refer

to Operations using the MIXTRAX button on

page 5.

MIXTRAX menu

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select MIXTRAX.

3 Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHORT MODE (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

MIX PATTERN (mix pattern)

The MIXTRAX special effects display changes with

changes in the audio level.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! SOUND LEVEL – The mix pattern changes

according to the sound level.

! LOW PASS – The mix pattern changes ac-

cording to the bass level.

! RANDOM – The mix pattern changes ran-

domly according to the sound level mode

and low pass mode.

DISP FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press and hold SRC/OFF until the main

menu appears in the display.

3 Turn M.C. to change the menu option

and press to select INITIAL.

4 Turn M.C. to select the initial menu func-

tion.

Once selected, the following initial menu func-

tions can be adjusted.

! S/W UPDATE is not available for MVH-160UI.

FM STEP (FM tuning step)

1 Press M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output

of this unit can be used to connect a full-range

speaker or subwoofer. Select a suitable option for

your connection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speak-

er leads output and there is a subwoofer

connected to the RCA output.

! SUB.W/SUB.W – Select when there is a

subwoofer connected directly to the rear

speaker leads output without any auxiliary

amp and there is a subwoofer connected

to the RCA output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speak-

er leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

This function is used to update this unit with the

latest Bluetooth software. For about Bluetooth

software and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to start updating.

Follow the on-screen instructions to finish up-

dating the Bluetooth software.

System menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press and hold SRC/OFF until the main

menu appears in the display.

3 Turn M.C. to change the menu option

and press to select SYSTEM.

4 Turn M.C. to select the system menu

function.

For details, refer to System menu on page 12.

Using an AUX source

1 Insert the stereo mini plug into the AUX

input jack.

2 Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on page 12.

English

Using this unit

13

Section

Using this unit

En

02

<QRD3211-B>13

Black plate (14,1)

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! Source name

! Source name and clock

If an unwanted display appears

Turn off the unwanted display using the proce-

dures listed below.

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select SYSTEM.

3 Turn M.C. to display DEMO OFF and press

to select.

4 Turn M.C. to switch to YES.

5 Press M.C. to select.

Connections

Important

! When installing this unit in a vehicle without

an ACC (accessory) position on the ignition

switch, failure to connect the red cable to the

terminal that detects operation of the ignition

key may result in battery drain.

O

N

S

T

A

R

T

O

F

ACC position No ACC position

! Use of this unit in conditions other than the

following could result in fire or malfunction.

— Vehicles with a 12-volt battery and negative

grounding.

— Speakers with 50 W (output value) and 4 W to

8 W (impedance value).

! To prevent a short-circuit, overheating or mal-

function, be sure to follow the directions

below.

— Disconnect the negative terminal of the bat-

tery before installation.

— Secure the wiring with cable clamps or adhe-

sive tape. Wrap adhesive tape around wiring

that comes into contact with metal parts to

protect the wiring.

— Place all cables away from moving parts,

such as the shift lever and seat rails.

— Place all cables away from hot places, such

as near the heater outlet.

— Do not connect the yellow cable to the battery

by passing it through the hole to the engine

compartment.

— Cover any disconnected cable connectors

with insulating tape.

— Do not shorten any cables.

— Never cut the insulation of the power cable of

this unit in order to share the power with

other devices. The current capacity of the

cable is limited.

— Use a fuse of the rating prescribed.

— Never wire the negative speaker cable directly

to ground.

— Never band together negative cables of multi-

ple speakers.

! When this unit is on, control signals are sent

through the blue/white cable. Connect this

cable to the system remote control of an ex-

ternal power amp or the vehicle’s auto-anten-

na relay control terminal (max. 300 mA

12 V DC). If the vehicle is equipped with a

glass antenna, connect it to the antenna

booster power supply terminal.

! Never connect the blue/white cable to the

power terminal of an external power amp.

Also, never connect it to the power terminal

of the auto antenna. Doing so may result in

battery drain or a malfunction.

! The black cable is ground. Ground cables for

this unit and other equipment (especially,

high-current products such as power amps)

must be wired separately. If they are not, an

accidental detachment may result in a fire or

malfunction.

This unit

1

3

2

6 78

4

5

1 Power cord input

2 Microphone input (MVH-X360BTonly)

3 Microphone (MVH-X360BT only)

4m

4 Rear output or subwoofer output

5 Front output

6 Antenna input

7 Fuse (10 A)

8 Wired remote input

Using this unit

14

Section

Installation

En

02

03

<QRD3211-B>14

Black plate (15,1)

Hard-wired remote control adapter can be

connected (sold separately).

Power cord

1

3

2

4

5

6

b

8

9

7

a

e

d

c

1 To power cord input

2 Depending on the kind of vehicle, the func-

tion of 3 and 5 may be different. In this

case, be sure to connect 4 to 5 and 6 to

3.

3 Yellow

Back-up (or accessory)

4 Yellow

Connect to the constant 12 V supply termi-

nal.

5 Red

Accessory (or back-up)

6 Red

Connect to terminal controlled by ignition

switch (12 V DC).

7 Connect leads of the same color to each

other.

8 Black (chassis ground)

9 Blue/white

The pin position of the ISO connector will dif-

fer depending on the type of vehicle. Connect

9 and b when Pin 5 is an antenna control

type. In another type of vehicle, never con-

nect 9 and b.

a Blue/white

Connect to system control terminal of the

power amp (max. 300 mA 12 V DC).

b Blue/white

Connect to auto-antenna relay control termi-

nal (max. 300 mA 12 V DC).

c Yellow/black (MVH-160UI only)

If you use an equipment with Mute function,

wire this lead to the Audio Mute lead on that

equipment. If not, keep the Audio Mute lead

free of any connections.

d Speaker leads

White: Front left +

White/black: Front left *

Gray: Front right +

Gray/black: Front right *

Green: Rear left + or subwoofer +

Green/black: Rear left * or subwoofer *

Violet: Rear right + or subwoofer +

Violet/black: Rear right * or subwoofer *

e ISO connector

In some vehicles, the ISO connector may be

divided into two. In this case, be sure to con-

nect to both connectors.

Notes

! Change the initial menu of this unit. Refer to

SP-P/O MODE (rear output and preout set-

ting) on page 13.

The subwoofer output of this unit is monau-

ral.

! When using a subwoofer of 70 W (2 W), be

sure to connect the subwoofer to the violet

and violet/black leads of this unit. Do not

connect anything to the green and green/

black leads.

Power amp (sold separately)

Perform these connections when using the op-

tional amplifier.

















1

3

2

4

55

3

2

6

77

1 System remote control

Connect to Blue/white cable.

2 Power amp (sold separately)

3 Connect with RCA cables (sold separately)

4 To Front output

5 Front speaker

6 To Rear output or subwoofer output

7 Rear speaker or subwoofer

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires

drilling of holes or other modifications to the

vehicle.

! Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

! The semiconductor laser will be damaged if

it overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

60°

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you

leave ample space behind the rear panel and

wrap any loose cables so they are not block-

ing the vents.

5cmcm

Leave ample

space

5 cm

DIN front/rear mount

This unit can be properly installed using either

front-mount or rear-mount installation.

Use commercially available parts when instal-

ling.

DIN Front-mount

1 Insert the mounting sleeve into the dash-

board.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough space,

use the mounting sleeve that came with the ve-

hicle.

English

Installation

15

Section

Installation

En

03

<QRD3211-B>15

Black plate (16,1)

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1

2

1 Dashboard

2 Mounting sleeve

# Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

or other malfunctions.

DIN Rear-mount

1 Determine the appropriate position

where the holes on the bracket and the side

of the unit match.

2 Tighten two screws on each side.

1

2

3

1 Tapping screw (5 mm × 8 mm)

2 Mounting bracket

3 Dashboard or console

Removing the unit

1 Remove the trim ring.

1 Trim ring

2 Notched tab

! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

2 Insert the supplied extraction keys into

both sides of the unit until they click into

place.

3 Pull the unit out of the dashboard.

Removing and re-attaching the front

panel

You can remove the front panel to protect your

unit from theft.

For details, refer to Removing the front panel and

Re-attaching the front panel on page 4.

Installing the microphone

Only for MVH-X360BT

CAUTION

It is extremely dangerous to allow the micro-

phone lead to become wound around the steer-

ing column or shift lever. Be sure to install the

unit in such a way that it will not obstruct driv-

ing.

Notes

! Install the microphone in a position and ori-

entation that will enable it to pick up the

voice of the person operating the system.

! Use separately sold clamps to secure the

lead where necessary inside the vehicle.

When installing the microphone on

the sun visor

1 Fit the microphone lead into the groove.

1

2

1 Microphone lead

2 Groove

2 Install the microphone clip on the sun

visor.

With the sun visor up, install the microphone

clip. (Lowering the sun visor reduces the voice

recognition rate.)

1

1 Microphone clip

When installing the microphone on

the steering column

1 Detach the microphone base from the mi-

crophone clip.

To detach the microphone base from the micro-

phone clip, slide the microphone base.

1

2

3

1 Microphone

2 Microphone clip

3 Microphone base

Installation

16

Section

Installation

En

03

<QRD3211-B>16

Black plate (17,1)

2 Install the microphone on the steering

column.

1

2

1 Double-sided tape

2 Install the microphone on the rear side of the

steering column.

Adjusting the microphone angle

Troubleshooting

Symptoms are written in bold and causes in reg-

ular, non-indented text. Regular, indented text is

used to indicate actions to be taken.

The display automatically returns to the ordinary

display.

You did not perform any operation within about 30

seconds.

Perform operation again.

The repeat play range changes unexpectedly.

Depending on the repeat play range, the selected

range may change when another folder or track is

being selected or during fast forwarding/reversing.

Select the repeat play range again.

A subfolder is not played back.

Subfolders cannot be played when FLD (folder re-

peat) is selected.

Select another repeat play range.

NO XXXX appears when a display is changed

(NO TITLE, for example).

There is no embedded text information.

Switch the display or play another track/file.

The unit is malfunctioning.

There is interference.

You are using a device, such as a cellular phone,

that may cause audible interference.

Move electrical devices that may be causing the

interference away from the unit.

The sound from the Bluetooth audio source is

not played back.

There is a call in progress on a Bluetooth connected

cellular phone.

The sound will be played back when the call is

terminated.

A Bluetooth connected cellular phone is currently

being operated.

Do not use the cellular phone at this time.

A call was made with a Bluetooth connected cellular

phone and then immediately terminated. As a result,

communication between this unit and the cellular

phone was not terminated properly.

Reconnect the Bluetooth connection between

this unit and the cellular phone.

Error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to note the error

message.

Symptoms are written in bold and causes in reg-

ular, non-indented text. Regular, indented text is

used to indicate actions to be taken.

Common

AMP ERROR

This unit fails to operate or the speaker connection is

incorrect; the protective circuit is activated.

Check the speaker connection. If the message

fails to disappear even after the engine is

switched off/on, contact your dealer or an

authorized Pioneer Service Station for

assistance.

USB storage device/iPod

FORMAT READ

Sometimes there is a delay between the start of play-

back and when you start to hear any sound.

Wait until the message disappears and you hear

sound.

English

Installation

17

Section

Additional information

En

03

<QRD3211-B>17

Black plate (18,1)

NO AUDIO

There are no songs.

Transfer the audio files to the USB storage device

and connect.

The connected USB storage device has security en-

abled.

Follow the USB storage device instructions to

disable the security.

SKIPPED

The connected USB storage device contains DRM

protected files.

The protected files are skipped.

PROTECT

All the files on the connected USB storage device

are embedded with DRM.

Replace the USB storage device.

N/A USB

The connected USB device is not supported by this

unit.

! Connect a USB Mass Storage Class compliant

device.

! Disconnect your device and replace it with a

compatible USB storage device.

CHECK USB

The USB connector or USB cable has short-

circuited.

Check that the USB connector or USB cable is

not caught in something or damaged.

CHECK USB

The connected USB storage device consumes more

than maximum allowable current.

Disconnect the USB storage device and do not

use it. Turn the ignition switch to OFF, then to

ACC or ON and then connect only compliant

USB storage devices.

CHECK USB

The iPod operates correctly but does not charge.

Make sure the connection cable for the iPod has

not shorted out (e.g., not caught in metal

objects). After checking, turn the ignition switch

OFF and back ON, or disconnect the iPod and

reconnect.

ERROR-19

Communication failed.

Perform one of the following operations.

–Turn the ignition switch OFF and back ON.

–Disconnect the USB storage device.

–Change to a different source.

Then, return to the USB source.

iPod failure.

Disconnect the cable from the iPod. Once the

iPod’s main menu is displayed, reconnect the

iPod and reset it.

ERROR-23

USB storage device was not formatted with FAT12,

FAT16 or FAT32.

USB storage device should be formatted with

FAT12, FAT16 or FAT32.

ERROR-16

The iPod firmware version is old.

Update the iPod version.

iPod failure.

Disconnect the cable from the iPod. Once the

iPod’s main menu is displayed, reconnect the

iPod and reset it.

STOP

There are no songs in the current list.

Select a list that contains songs.

NOT FOUND

No related songs.

Transfer songs to the iPod.

Bluetooth device

ERROR-10

The power failed for the Bluetooth module of this

unit.

Turn the ignition switch OFF and then to ACC or

ON.

If the error message is still displayed after

performing the above action, please contact your

dealer or an authorized Pioneer Service Station.

Application

NO BT DEVICE GO TO BT MENU TO REGISTER

No Bluetooth device found.

Follow the instructions that appear on the

screen.

CONN. FAILED PRESS BAND KEY TO RETRAY

Bluetooth connection failed.

Follow the instructions that appear on the

screen.

DISCONNECTED PRESS BAND KEY TO RETRAY

Bluetooth connection failed.

Follow the instructions that appear on the

screen.

CHECK APP

Connection to the application failed.

Follow the instructions that appear on the

screen.

START UP APP

The application has not started running yet.

Follow the instructions that appear on the

screen.

Handling guidelines

USB storage device

Connections via USB hub are not supported.

Do not connect anything other than a USB stor-

age device.

Firmly secure the USB storage device when driv-

ing. Do not let the USB storage device fall onto the

floor, where it may become jammed under the

brake or accelerator pedal.

Depending on the USB storage device, the follow-

ing problems may occur.

! Operations may vary.

! The storage device may not be recognized.

! Files may not be played back properly.

! The device may cause audible interference

when you are listening to the radio.

iPod

Do not leave the iPod in places with high tempera-

tures.

Firmly secure the iPod when driving. Do not let the

iPod fall onto the floor, where it may become

jammed under the brake or accelerator pedal.

About iPod settings

! When an iPod is connected, this unit changes

the EQ (equalizer) setting of the iPod to off in

order to optimize the acoustics. When you dis-

connect the iPod, the EQ returns to the original

setting.

! You cannot set Repeat to off on the iPod when

using this unit. Repeat is automatically

changed to All when the iPod is connected to

this unit.

Incompatible text saved on the iPod will not be dis-

played by the unit.

Additional information

18

Appendix

Additional information

En

<QRD3211-B>18

Black plate (19,1)

Compressed audio

compatibility (USB)

WMA

File extension: .wma

Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to

384 kbps (VBR)

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Windows Mediaä Audio Professional, Lossless,

Voice/DRM Stream/Stream with video: Not com-

patible

MP3

File extension: .mp3

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz (32 kHz,

44.1 kHz, 48 kHz for emphasis)

Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4

(ID3 tag Version 2.x is given priority over Version

1.x.)

M3u playlist: Not compatible

MP3i (MP3 interactive), mp3 PRO: Not compatible

WAV

File extension: .wav

Quantization bits: 8 and 16 (LPCM), 4 (MS

ADPCM)

Sampling frequency: 16 kHz to 48 kHz (LPCM),

22.05 kHz and 44.1 kHz (MS ADPCM)

! You cannot use this function with USB MTP.

Supplemental information

Only the first 32 characters can be displayed as a

file name (including the file extension) or a folder

name.

Russian text to be displayed on this unit should be

encoded in one of the following character sets:

! Unicode (UTF-8, UTF-16)

! A character set other than Unicode that is

used in a Windows environment and is set to

Russian in the multi-language setting

This unit may not work properly depending on the

application used to encode WMA files.

There may be a slight delay at the start of playback

of audio files embedded with image data or audio

files stored on a USB storage device that has nu-

merous folder hierarchies.

USB storage device

Playable folder hierarchy: up to eight tiers (A prac-

tical hierarchy is less than two tiers.)

Playable folders: up to 500

Playable files: up to 15 000

Playback of copyright-protected files: Not compati-

ble

Partitioned USB storage device: Only the first par-

tition can be played.

There may be a slight delay when starting play-

back of audio files on a USB storage device with

numerous folder hierarchies.

CAUTION

! Pioneer cannot guarantee compatibility with

all USB mass storage devices and assumes

no responsibility for any loss of data on

media players, smart phones, or other devi-

ces while using this product.

! Do not leave a USB storage device in any

place that is subject to high temperatures.

iPod compatibility

This unit supports only the following iPod mod-

els.

Made for

! iPod touch (5th generation)

! iPod touch (4th generation)

! iPod touch (3rd generation)

! iPod touch (2nd generation)

! iPod touch (1st generation)

! iPod classic

! iPod with video

! iPod nano (7th generation)

! iPod nano (6th generation)

! iPod nano (5th generation)

! iPod nano (4th generation)

! iPod nano (3rd generation)

! iPod nano (2nd generation)

! iPod nano (1st generation)

! iPhone 5

! iPhone 4S

! iPhone 4

! iPhone 3GS

! iPhone 3G

! iPhone

Depending on the generation or version of the

iPod, some functions may not be available.

Operations may vary depending on the software

version of iPod.

Users of iPod with the Lightning Connector should

use the Lightning to USB Cable (supplied with

iPod).

Users of iPod with the Dock Connector should use

CD-IU51. For details, consult your dealer.

About the file/format compatibility, refer to the

iPod manuals.

Audiobook, Podcast: Compatible

CAUTION

Pioneer accepts no responsibility for data lost

on the iPod, even if that data is lost while this

unit is used.

Sequence of audio files

The user cannot assign folder numbers and

specify playback sequences with this unit.

Example of a hierarchy













Level 1 Level 2 Level 3 Level 4

01

02

03

04

05

: Folder

: Compressed

audio file

01 to 05: Folder

number

1 to 6: Playback

sequence

USB storage device

Playback sequence is the same as recorded se-

quence in the USB storage device.

To specify the playback sequence, the following

method is recommended.

1 Create a file name that includes numbers

that specify the playback sequence (e.g.,

001xxx.mp3 and 099yyy.mp3).

2 Put those files into a folder.

3 Save the folder containing files on the USB

storage device.

English

Additional information

19

Appendix

Additional information

En

<QRD3211-B>19

Black plate (20,1)

However, depending on the system environment,

you may not be able to specify the playback se-

quence.

For USB portable audio players, the sequence is

different and depends on the player.

Russian character chart

D: C D: C D: C D: C D: C

: А : Б : В : Г : Д

: Е, Ё : Ж : З : И, Й : К

: Л : М : Н : О : П

: Р : С : Т : У : Ф

: Х : Ц : Ч

: Ш,

Щ

: Ъ

: Ы : Ь : Э : Ю : Я

D: Display C: Character

Bluetooth profiles

In order to use Bluetooth wireless technology,

devices must be able to interpret certain pro-

files. This unit is compatible with the following

profiles.

! GAP (Generic Access Profile)

! OPP (Object Push Profile)

! HFP (Hands Free Profile) 1.5

! PBAP (Phone Book Access Profile)

! A2DP (Advanced Audio Distribution Profile)

! AVRCP (Audio/Video Remote Control Profile)

1.3

! SPP (Serial Port Profile) 1.1

Copyright and trademark

Bluetooth

The Bluetooth

â

word mark and logos are regis-

tered trademarks owned by Bluetooth SIG, Inc.

and any use of such marks by PIONEER

CORPORATION is under license. Other trade-

marks and trade names are those of their re-

spective owners.

iTunes

Apple and iTunes are trademarks of Apple Inc.,

registered in the U.S. and other countries.

MP3

Supply of this product only conveys a license for

private, non-commercial use and does not con-

vey a license nor imply any right to use this prod-

uct in any commercial (i.e. revenue-generating)

real time broadcasting (terrestrial, satellite,

cable and/or any other media), broadcasting/

streaming via internet, intranets and/or other

networks or in other electronic content distribu-

tion systems, such as pay-audio or audio-on-de-

mand applications. An independent license for

such use is required. For details, please visit

http://www.mp3licensing.com.

WMA

Windows Media is either a registered trademark

or trademark of Microsoft Corporation in the

United States and/or other countries.

This product includes technology owned by

Microsoft Corporation and cannot be used or

distributed without a license from Microsoft

Licensing, Inc.

iPod & iPhone

iPhone, iPod, iPod classic, iPod nano, and iPod

touch are trademarks of Apple Inc., registered in

the U.S. and other countries.

Lightning is a trademark of Apple Inc.

“Made for iPod” and “Made for iPhone” mean

that an electronic accessory has been designed

to connect specifically to iPod or iPhone, respec-

tively, and has been certified by the developer to

meet Apple performance standards. Apple is

not responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this ac-

cessory with iPod or iPhone may affect wireless

performance.

Androidä

Android is a trademark of Google Inc.

MIXTRAX

MIXTRAX is a trademark of the PIONEER

CORPORATION.

Additional information

20

Appendix

Additional information

En

<QRD3211-B>20

Страница загружается ...

Pioneer MVH-16UI Руководство пользователя

Это руководство также подходит для

Pioneer MVH-16UI Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов