Sony KV-SW252M91 Руководство пользователя

Категория
Телевизоры CRT
Тип
Руководство пользователя

Это руководство также подходит для

Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Trinitron Color TV
© 2005 Sony Corporation
KV-SW292
KV-SW252
2-655-047-11 (1)
M91
Operating Instructions
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
Инструкция по эксплуатации
Перед работой с устройством внимательно прочтайте инструкцию
и сохраните её для дальнейшего использования.
GB
RU
01GB01COV-SOEMRus.p65 9/5/05, 2:30 PM1
Black
2
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 220 – 240 V AC.
Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Clean the TV with a dry and soft
cloth. Do not use benzine, thinner,
or any other chemicals to clean the
TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape,
glue) on the painted cabinet of the
TV. Do not scratch the picture
tube.
Install the TV on a stable TV stand
and floor which can support the
TV set weight. Ensure that the TV
stand surface is flat and its area is
larger than the bottom area of the
TV.
Do not plug in too many
appliances to the same power
socket. Do not damage the power
cord.
For children’s safety, do not leave
children alone with the TV. Do not
allow children to climb onto it.
For your own safety, do not touch
any part of the TV, the power cord
and the antenna cable during
lightning storms.
Do not place any objects on the TV.
The apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
Do not operate the TV if any liquid
or solid object falls into it. Have it
checked immediately by qualified
personnel only.
Do not block the ventilation
openings of the TV. Do not install
the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not open the cabinet and the
rear cover of the TV as high
voltages and other hazards are
present inside the TV. Refer
servicing and disposal of the TV
to qualified personnel.
Pull the power cord out by the
plug. Do not pull the power cord
itself. Even if your TV is turned
off, it is still connected to the AC
power source (mains) as long as
the power cord is plugged in.
Unplug the TV before moving it
or if you are not going to use it for
several days.
To prevent fire or shock hazard, do
not expose the TV to rain or
moisture.
Your TV is recommended for
home use only. Do not use the TV
in any vehicle or where it may be
subject to excessive dust, heat,
moisture or vibrations.
01GB02WAR-SOEMRus.p65 9/5/05, 2:30 PM2
Black
3
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Menu Adjustment
Introducing the WEGA GATE
navigator ............................................. 15
“Settings” Adjustment ...................... 16
Changing the “Picture” setting........ 17
Changing the “Sound” setting......... 18
Changing the “Channel Setup”
setting .................................................. 19
Changing the “Setup” setting .......... 21
Additional Information
Connecting optional components ... 22
Troubleshooting ................................. 24
Specifications ...................................... 26
GB
Table of Contents
Installation
Securing the TV .................................... 4
Getting Started ..................................... 5
Setting up your TV
(“Initial Setup”) .................................... 6
Overview of Controls
TV front and rear panels ..................... 8
Using the remote control and
basic functions ...................................... 9
Advanced Operations
Selecting the picture and sound
modes .................................................. 11
Listening to the FM Radio ................ 12
Enjoying stereo or bilingual
programs ............................................. 13
Viewing Teletext................................. 14
Made in Malaysia.
Sony Corporation
6-7-35 Kitashinagawa,
Shinagawa-ku, Tokyo, 141-0001 Japan.
01GB03TOC-SOEMRus.p65 9/5/05, 2:31 PM3
Black
4 Installation
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Installation
x Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of your
TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
Note
Use only the supplied screws. Use of other screws may damage the TV.
or
or
20 mm
3.8 mm
screws clamps band
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM4
Black
Installation
5
Installation
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Step 1
Insert the batteries (supplied) into the remote.
Note
Do not use old or different types of batteries together.
Step 2
Step 3
Step 4
Set up the TV by following the instructions of the
Начальная настройкa” (“Initial Setup”) menu (see
page 6).
Plug in the power cord, then press ! on the TV to
turn it on.
Note
The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a
malfunction.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tips
Your TV can receive both TV and FM radio signal from the
appropriate connections through the 8 (antenna input)
terminal (see page 22).
You can also connect your TV to other optional components
(see page 22).
x Getting Started
b
b
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM5
Black
6 Installation
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x
Setting up your TV
(“Initial Setup”)
When you turn on your TV for the first time, the “Initial Setup” menu will
appear. You may change the menu language, preset the TV channels
automatically, sort or edit the channels and adjust the picture position using the
buttons on the remote control or TV front panel.
1
Press V or v to select the desired menu
language, then press .
The selected menu language appears.
2
Press V or v to select “Yes”, then press
to preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the “Program Sorting/Edit”
menu appears automatically on the screen.
To skip automatic channel presetting, select
“No”, then press
.
If the message “No channel found. Please
connect cable/antenna” appears, check your
TV connections, then press
.
3
The “Program Sorting/Edit” menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected channel,
then press B.
Confirm
Select
End
End
Select
Confirm
Program:
TV System: Auto
01
VHF Low
End
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Sorting mode
PROG
SkipLabel
Off01
Exit
Select
Confirm
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Off
Sorting:
Edit:
PROG
SkipLabel
Exit
Select
Confirm
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM6
Black
Installation
7
Installation
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip,
(block symbol).
Then press
.
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press .
2) To skip the program number, press V or v to
select “On”. Then press .
You can skip this program number when
using PROG +/-.
3) To block unwanted program number,
press V or v to select . Then press .
e) Repeat step b) to d) if you wish to change other
channels.
Press WEGA GATE to go to the next menu.
4
Press B or b to adjust the bars on the top
and bottom of the menu if they are
slanted, then press
.
“Picture V-Position” menu appears.
5
If the upper and lower bars are not
equally positioned to the top and
bottom of the screen, press V or v to
adjust them, then press
.
If no adjustment is necessary, then press
.
6
To prevent this “Initial Setup” menu from
appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press
.
To allow this menu to appear again, select
“Yes”, then press
.
Tip
You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.
Exit
Select
Confirm
Exit
Select
Confirm
Exit
Select
Confirm
Select
End
Confirm
Select
End
Confirm
Select
Confirm
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM7
Black
8 Overview of Controls
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Overview of Controls
x TV front and rear panels
Button/Terminal Function Page
1 ! Turn off or turn on the TV. 5
2 1 Standby indicator. 5
2 Wake Up indicator. 10
3 Remote control sensor.
4 PROG +/– Select program number.
5 2 +/– Adjust volume.
6 t Select TV or video input. 22
WEGA GATE menu operations
4,5 V,v,B,b Select and adjust items. 15
6 Confirm selected items. 15
7 WEGA GATE Display or cancel WEGA GATE menu. 15
8 FM Listen to FM Radio. 12
9
t2 Video input terminal 2. 22
0 i Headphone jack.
qa Component video input terminal. 23
qs T Monitor output terminal. 23
qd t1, t3 Video input terminal 1, 3. 22
qf 8 Antenna input terminal. 22
qa
1
3
RLY
C
B
C
R
qd
qs
3
2
0
9
2
L(MONO) R
1
qf
45
PROG
FM
WEGA GATE
678
2
L(MONO) R
PROG
FM
WEGA GATE
TV rear panel
TV front panel
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM8
Black
9
Overview of controls
Overview of Controls
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x Using the remote control and basic
functions
Button Description Page
1 ?/1 Turn off temporarily or turn on the TV.
2 a Display the TV program.
3 Jump to last program number that has been
watched for at least five seconds.
4 PROG +/– Select program number.
5 2 +/– Adjust volume.
8 Change the picture size:
“On” (16:9 wide mode), “Off”.
9 Select surround mode options. 18
0
Display on-screen information.
qa Mute the sound.
qd t Select TV or video input. 22
qf 0 – 9 Input numbers. For program numbers 10 and
above, enter the second digit within two seconds.
ql Select sound mode options with a 5-Band 11
Graphic Equalizer display.
w; Select picture mode options. 11
continue
RETURN
WEGA
GATE
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
1
2
3
7
4
5
qj
qk
qa
qd
qf
qh
RETURN
WEGA
GATE
6
8
9
0
w;
ql
qg
qs
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM9
Black
10 Overview of Controls
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Button Description Page
WEGA GATE menu operations
6 Confirm selected items. 15
7 WEGA GATE Display or cancel the WEGA GATE menu.
qj V, v, B, b Select and adjust items.
qk
RETURN Return to the previous level.
Timer operations
qg Set TV to turn on automatically according to the
desired period of time (max. of 12 hours).
The indicator on TV lights up amber once
you set the wake up timer.
If no buttons or controls are pressed for more than
one hour after the TV is turned on using the
wake up timer, the TV automatically goes into
standby mode.
qh
Set TV to turn off automatically according to the
desired period of time (max. of one hour and
30 min.).
Teletext operations (green label)
, , , ,
All buttons are used for Teletext operations. 14
, , , ,
(red, green,
yellow, blue)
PIP operations
, , V, v, B, b Not function for your TV.
Stereo/bilingual operations
qs A/B Select stereo/bilingual mode. 13
(Wake up timer)
(Sleep timer)
continued
01GB04INS-SOEMRus.p65 9/5/05, 2:44 PM10
Black
11
Advanced Operations
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Advanced Operations
Selecting the sound mode
Press to select the desired sound mode. 5-Band Graphic Equalizer display will
appear.
Select To listen to
“Dynamic” dynamic and clear sound that emphasizes both the low
and high tones.
“Standard” sound that emphasizes voice and high tones.
“Custom” the last adjusted sound setting from the
“Sound Adjustment” option in the menu (see page 18).
x Selecting the picture and sound
modes
You can select picture and sound modes and adjust the setting to your
preference in the “Custom” option.
Selecting the picture mode
Press to select the desired picture mode.
Select To view
“Vivid” contrast and sharp pictures.
“Standard” normal pictures.
“Custom” the last adjusted picture setting
from the “Picture Adjustment”
option in the menu (see page 17).
RETURN
WEGA
GATE
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
WEGA
GATE
Dynamic
100 300 1k 3k 8k
100 300 1k 3k 8k
Standard
100 300 1k 3k 8k
Custom
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM11
Black
12 Advanced Operations
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x Listening to the FM Radio
You are able to listen to the FM radio stations using your TV.
To access to FM Radio mode:
Press WEGA GATE button and select “FM Radio” (see page 15).
or
Press FM button on the front panel (see page 8).
To exit from FM Radio mode:
Press WEGA GATE button, select the desired items: “TV” or “External Inputs”,
then press
. Select the desired TV channel or external inputs and press .
or
Press FM button on the front panel.
Listening to non-preset stations
1
Access to FM Radio mode.
2
Press V or v to search for the desired FM radio station. The preset number and
label will not be displayed.
3
If the station has a weak signal, press B or b to fine tune the radio frequency
manually.
Notes
You can only operate V, v, B and b functions using the remote control buttons in FM
Radio mode.
The available radio frequency is only for temporary listening pleasure and cannot be stored in
the memory.
If the message “Please setup FM Radio” appears, display the “Channel Setup” menu and
select “FM Radio Setup” to preset the desired FM radio stations (see page 19).
Listening to preset stations
1
Access to FM Radio mode.
2
Press WEGA GATE button and select “Settings”.
Preset the desired FM radio stations in “FM Radio
Setup” from “Channel Setup” menu (see page 19).
3
Exit from “Channel Setup” menu by pressing WEGA
GATE button. The selected preset FM radio station
number and label will appear on the screen.
To select the desired preset FM radio station, press
PROG +/–.
Tip
• You can also use the 1-9 buttons on the remote control to
directly select the desired preset FM radio station.
Note
When a FM stereo program has static noise, press A/B until “Mono” appears. There will be no
stereo effect, but the noise will be reduced.
A/B
PROG
+/–
V, v,
B, b
WEGA
GATE
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
WEGA
GATE
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM12
Black
13
Advanced Operations
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
When receiving a NICAM program
Broadcasting On-screen display (Selected sound)
NICAM
stereo
NICAM
bilingual
NICAM
monaural
When receiving an A2 program
Broadcasting On-screen display (Selected sound)
A2
stereo
A2
bilingual
x
Enjoying stereo or bilingual programs
You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo
systems by using the A/B button.
NICAM
(Stereo sound)
Mono
(Regular sound)
t
t
NICAM Main
(Main sound)
NICAM Sub
(Sub sound)
Mono
(Regular sound)
tt
t
Mono
(Regular sound)
Stereo
(Stereo sound)
t
t
Main
(Main sound)
Sub
(Sub sound)
t
t
NICAM Main
(Main sound)
Mono
(Regular sound)
t
t
Note
If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound
becomes monaural but the noise is reduced.
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
WEGA
GATE
A/B
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM13
Black
14 Advanced Operations
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x Viewing Teletext
Some TV stations broadcast an information service called Teletext which allows
you to receive various information, such as stock market reports and news.
You can use the buttons on the remote to view Teletext.
To Do this
display a Teletext Press . Each time you press , the
page on the screen changes as follows:
TV picture Teletext t Teletext and TV t TV.
If there is no Teletext broadcast, “100” is
displayed at the top left corner of the
screen.
check the contents Press .
of a Teletext service An overview of the Teletext contents,
including page numbers, appears on the
screen.
select a Teletext page Press the number buttons to enter the
three-digit page number of the desired
Teletext page. If you make a mistake,
reenter the correct page number. To
access the next or previous page, press
or .
hold (pause) a Press to display the symbol “ ” at
Teletext display the top left corner of the screen. To
resume normal Teletext viewing, press
.
reveal concealed Press .
information (e.g., To conceal the information, press the
an answer to a quiz) button again.
enlarge the Teletext Press . Each time you press , the
display Teletext display changes as follows:
Enlarge upper half t Enlarge lower
half t Normal size.
stand by for a Teletext (1) Enter the Teletext page number that
page while watching you want to refer to, then press .
a TV program (2) When the page number is displayed,
press to show the text.
select a FASTEXT Press (red, green, yellow and blue)
menu or the colored that corresponds to the desired menu or
boxes page number.
turn off Teletext Press a.
Note
The FASTEXT feature can be used only when the FASTEXT broadcast is available.
(red,
green,
yellow,
blue)
RETURN
WEGA
GATE
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
WEGA
GATE
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
RETURN
,
WEGA
GATE
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM14
Black
15
Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Menu Adjustment
x Introducing the WEGA GATE
navigator
WEGA GATE is a gateway that allows you access to preset TV channels,
connected external inputs, FM Radio mode and “Settings” menu.
Confirm
Select
WEGA GATE
Settings
External Inputs
FM Radio
TV
01
02
03
04
05
TV
Confirm
Select
End
Preset 1:
---.--
Please setup FM Radio
FM Radio
Select Preset 1-9
Search
Exit
External Inputs
Confirm
Select
End
Video 1
1
2
3
Video 3
Video 2
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
Intelligent Picture: On
Select
Fine
—PROG+
DVD
01
02
03
04
05
TV
Confirm
Select
End
Confirm
Select
WEGA GATE
Settings
External Inputs
TV
FM Radio
01
02
03
04
05
TV
Confirm
Select
End
How to use WEGA GATE
(1) Press WEGA GATE to display or cancel
the WEGA GATE menu.
Confirm
Select
WEGA GATE
Settings
External Inputs
TV
FM Radio
(3) Press V or v to select the desired item.
(4) Press RETURN to move to the previous
level.
(2) Press (or b) to confirm your selection
or go to the next level.
Tip
The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for the operations
above.
watch the preset TV
channels (see page 6)
select the inputs for the
connected equipment
(see page 22)
change the settings
of your TV
(see page 16)
“TV”
“External Inputs”
“Settings”
“FM Radio”
listen to the FM Radio
(see page 12)
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM15
Black
16 Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x “Settings” Adjustment
You are able to change the settings of your TV from “Settings” in WEGA GATE
menu.
Press WEGA GATE button to display WEGA GATE menu. Press V or v to select
“Settings” and press
.
The following is an overview of the items that can be adjusted.
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
Intelligent Picture: On
Select
“Picture” (see page 17)
“Picture Mode”: “Vivid” “Standard” “Custom”
“Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,
“Sharpness”, “Reset”
“Color Temperature”: “Cool” “Neutral” “Warm”
“Intelligent Picture”: “On” “Off”
Confirm
End
Sound
Sound Adjustment
Sound Mode: Dynamic
Select
Balance
Intelligent Volume:
Surround: Off
Off
“Sound” (see page 18)
“Sound Mode”: “Dynamic” “Standard” “Custom”
“Sound Adjustment”: “Adjust”, “Reset”
“Balance”
“Intelligent Volume”: “On” “Off”
“Surround”: “On” “Simulated” “Off”
“Channel Setup” (see page 19)
“Auto Program”
“Manual Program”
“Program”: “00” - “99”
“TV System”: “B/G” “I” “D/K” “M”
“VHF Low”/“VHF High”/“UHF”
“Fine”: “Auto” “Manual”
“Signal Booster”: “Auto” “Off”
“Program Sorting/Edit”
“FM Radio Setup”
“Setup” (see page 21)
“Language”: “English” ” (Russian)
“Picture Position”: “Picture Rotation”, “Picture V-Position”
“Video Label”: “Video Input”, “Label”
“Color System”: “Auto” “PAL” “SECAM” “NTSC3.58”
“NTSC4.43”
“Factory Settings”: “Yes” “No”
Note
When a feature is dimmed in the menu, it is not selectable.
Confirm
End
Channel Setup
Select
Manual Program
Auto Program
Program Sorting/Edit
FM Radio Setup
Confirm
End
Setup
Select
Picture Position
Language:
Video Label
Color System: Auto
Factory Settings
English
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM16
Black
17
Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x Changing the “Picture” setting
The “Picture” menu allows you to adjust the picture settings.
1
Press WEGA GATE and select “Settings”.
2
Make sure the “Picture” icon ( ) is
selected, then press
.
3
Press V or v to select the desired item (e.g., “Picture Mode”), then press .
Select To
“Picture Mode” choose either “Vivid”, “Standard” or “Custom”*
(see page 11).
“Color Temperature” adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral tint) or
“Warm” (red tint).
“Intelligent Picture” optimize picture quality.
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
* You can adjust the setting to your personal preference in the “Picture Adjustment” and
“Color Temperature” options only when the “Custom” mode is selected.
Adjusting the “Picture Adjustment” items under
“Custom” mode
1
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones) or “Sharpness”, then press
.
Selecting “Reset” will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press .
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Custom”.
Notes
“Hue” can be adjusted for the NTSC color system only.
Reducing “Sharpness” can also reduce picture noise.
Confirm
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
Intelligent Picture: On
Select
End
01GB05AVD-SOEMRus.p65 9/5/05, 2:50 PM17
Black
18 Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Adjusting the “Sound Adjustment” items under
“Custom” mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Custom” mode in the menu.
1
Make sure that “Adjust” is selected, then press .
Selecting “Reset” will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
.
The adjusted settings will be received when you select “Custom”.
Notes
Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
You may display the settings directly by using the button on the remote control (see
page 11).
x Changing the “Sound” setting
The “Sound” menu allows you to adjust the sound settings.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Sound”
icon (
), then press .
3
Press V or v to select the desired item (e.g., “Sound Mode”), then press .
Select To
“Sound Mode” choose either “Dynamic”, “Standard” or “Custom”*
(see page 11).
“Balance” Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume” adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
“Surround” choose either “On” (surround), “Simulated” (stereo-like
monaural sound) or “Off”.
* You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Custom” mode is selected.
Confirm
End
Sound
Balance
Sound Adjustment
Sound Mode: Dynamic
Intelligent Volume: Off
Surround: Off
Select
01GB06ADJ-SOEMRus.p65 9/5/05, 2:35 PM18
Black
19
Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
x C
hanging the “Channel Setup”
setting
The “Channel Setup” menu allows you to preset channels automatically,
manually preset channels, sort or edit the channels and preset FM radio stations.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Channel Setup”
icon (
), then press .
3
Press V or v to select the desired item (e.g., “Auto Program”), then press .
Select To
“Auto Program” preset channels automatically.
“Manual Program” manually preset desired channels and channels that cannot be
preset automatically (see Presetting channels manually in
page 20).
“Program Sorting/Edit” change the order in which the channels appear on the screen,
label the program number, skip the program number and block
unwanted programs.
(see step 3 of the section “Initial Setup” in page 6).
“FM Radio Setup”* preset up to nine FM radio stations.
You can manually preset each FM radio station that can be
received in your area and then store the radio frequency of the
desired FM radio stations.
(1) Press V or v to select the desired FM radio station position,
then press .
(2) Press V or v to search the FM radio stations.
Searching stops automatically when a station is tuned in.
If the station has a weak signal, press B or b to fine tune the
radio frequency manually, then press to store the FM
radio station.
(3) You may edit the FM radio station label. Press V or v to
select alphanumeric characters for the label, then press .
(4) Repeat steps (1) through (3) to preset other FM radio stations.
* The “FM Radio Setup” feature is only available in FM Radio
mode. To enable this feature, access to FM Radio mode by using
WEGA GATE system (see page 15) or pressing the FM button
on the front panel (see page 8), then preset your desired FM
radio stations according to the steps mentioned above.
Notes
If you preset a blocked program number, that program number will be unblocked
automatically.
If you sort a blocked program, that program will remain blocked.
Confirm
End
Channel Setup
Program Sorting/Edit
FM Radio Setup
Manual Program
Auto Program
Select
continue
01GB06ADJ-SOEMRus.p65 9/5/05, 2:35 PM19
Black
20 Menu Adjustment
Sony KV-SW292M91 Group Q9 (GB,RU)_2-655-047-11 (1)
Presetting channels manually
1
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press
.
(2) Press V or v
until the program number you want
to preset appears on the menu, then press
.
2
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press .
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press V or v
to select “TV System”, then press .
(2) Press V or v
until the sound becomes normal, then press .
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press V or v
to select “Fine”, then press .
(2) Press V or v
to select “Manual”, then press .
(3)
Press V,v,B or b until the picture and sound quality are optimal, then press .
The + or – icon on the menu flashes while tuning.
5
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press V or v
to select “Signal Booster”, then press .
(2) Press V or v
to select either “Off”(for picture distorted; picture with lines;
signal interference) or “Auto” (for snowy picture), then press
.
VHF Low
Fine:
TV System:
B/G
Program:
Manual Program
Confirm
Select
01
Auto
Signal Booster:
Auto
End
continued
01GB06ADJ-SOEMRus.p65 9/5/05, 2:35 PM20
Black
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

Sony KV-SW252M91 Руководство пользователя

Категория
Телевизоры CRT
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

на других языках