Panasonic SC-AKX710 Руководство пользователя

Confidential

Until:

1 Aug 2018

TQBJ2138

GS

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Operating Instructions

Инструкция по эксплуатации

Інструкція з експлуатації

CD Stereo System

CD-cтереосистема

CD-стереосистема

Model No. SC-AKX710

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

Благодарим Вас за покупку данного изделия.

Для обеспечения оптимальной и безопасной pаботы системы внимательно пpочтите данную инстpукцию.

Сохраните инструкцию для дальнейших справок.

Дякуємо Вам за придбання цього пристрою.

Щоб забезпечити найбільш оптимальну та безпечну роботу, будь ласка, уважно ознайомтеся з цими

інструкціями.

Збережіть цей посібник для майбутнього використання.

AKX710 GS TQBJ2138.book Page 1 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

2

TQBJ2138

2

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

These operating instructions are applicable to the

following system.

Your system and the illustrations can look differently.

The symbols on this product (including the accessories)

represent the following:

For Thailand

For Australia and New Zealand

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as vases,

on this unit.

– Use the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

– Do not let metal objects fall inside this unit.

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product

damage,

– Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit

is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as

lighted candles, on this unit.

• This unit is intended for use in moderate and tropical

climates.

• This unit may receive radio interference caused by

mobile telephones during use. If such interference

occurs, please increase separation between this unit

and the mobile telephone.

• This unit utilizes a laser. Use of controls or adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

• Set the unit up on an even surface away from direct

sunlight, high temperatures, high humidity, and

excessive vibration.

AC mains lead

• The mains plug is the disconnecting device. Install this

unit so that the mains plug can be unplugged from the

socket outlet immediately.

Battery

• Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

• When disposing of the batteries, please contact your

local authorities or dealer and ask for the correct

method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and

windows closed.

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese battery.

• Do not use the battery if the cover has peeled off.

• Remove the battery if you do not use the remote control

for a long period of time. Keep in a cool, dark area.

System SC-AKX710

Main unit SA-AKX710

Speakers SB-AKX710

AC

Class II equipment (The construction of the

product is double-insulated.)

ON

Standby

Recording and playback of content on this (or any other)

device may require permission from the copyright

owner. Panasonic has no authority to and does not grant

you that permission and explicitly disclaims any right,

ability or intention to obtain such permission on your

behalf. It is your responsibility to ensure that your use of

this or any other device complies with applicable

copyright law in your country.

This telecommunication equipment conforms to

NTC/NBTC technical requirement.

Disposal of Old Equipment and Batteries

Only for European Union and countries

with recycle systems

These symbols are only valid in the

European Union and countries with recycle

systems.

If you wish to discard this product, please

contact your local authorities or dealer and

ask for the correct method of disposal.

AKX710 GS TQBJ2138.book Page 2 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

3

TQBJ2138

3

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Table of contents

Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Note on AC mains lead . . . . . . . . . . . . . . . . . . . . . . . . . .3

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Supplied accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Placement of speakers . . . . . . . . . . . . . . . . . . . . . . . . . .4

Preparing the remote control . . . . . . . . . . . . . . . . . . . . . .4

Making the connections. . . . . . . . . . . . . . . . . . . . . . . . . .5

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Preparing media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Media playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sound effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Illumination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

DJ functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Using a microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Clock and timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

External equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Note on AC mains lead

(For the AC mains plug of three pins)

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

References

Licenses

About Bluetooth

®

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and

has received certification based on frequency laws.

Thus, a wireless permit is not necessary.

• The actions below are punishable by law in some

countries:

– Taking apart or modifying the main unit.

– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth®

equipped devices is not guaranteed.

• All devices must conform to standards set by the

Bluetooth SIG, Inc.

• Depending on the specifications and settings of a

device, it can fail to connect or some operations can be

different.

• This system supports Bluetooth® security features. But

depending on the operating environment and/or

settings, this security is possibly not sufficient. Transmit

data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth® device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the

environment, obstacles or interference.

Interference from other devices

• This system may not function properly and troubles

such as noise and sound jumps may arise due to radio

wave interference if this unit is located too close to

other Bluetooth® devices or the devices that use the

2.4 GHz band.

• This system may not function properly if radio waves

from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an

environment that is sensitive to radio frequency

interference (example: airports, hospitals, laboratories,

etc.).

Figure A Figure B

Fuse cover

Fuse (5 ampere)

The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any

use of such marks by Panasonic Corporation is under

license. Other trademarks and trade names are those of

their respective owners.

Android and Google Play are trademarks of Google

LLC.

Panasonic bears no responsibility for data and/or

information that is compromised during a wireless

transmission.

AKX710 GS TQBJ2138.book Page 3 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

4

TQBJ2138

4

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Supplied accessories

Check and identify the supplied accessories.

2 AC mains leads

1 Ferrite core

1 AM loop antenna

1 FM indoor antenna

1 Remote control

(N2QAYB001198)

1 Remote control battery

Note:

Use the AC mains lead that is suitable for your household

mains socket.

Placement of speakers

The left and right speakers are the same.

Use only the supplied speakers.

You can cause damage to the system and decrease the

sound quality if you use other speakers.

Note:

•Keep your speakers more than 10 mm from the main unit for

ventilation.

•Put the speakers on a flat safe surface.

•These speakers do not have magnetic shielding. Do not put

them near TVs, PCs or other equipment easily influenced by

magnetism.

•When you play at high levels for a long period, it can cause

damage to the speakers and decrease the life of the

speakers.

•Decrease the volume in these conditions to prevent

damage:

–When the sound is distorted.

–When you adjust the sound quality.

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with

those in the remote control.

CAUTION!

•Use the speakers only with the recommended

system. If not, you can cause damage to the

amplifier and speakers and can cause a fire.

Consult an approved service personnel if damage

occurs or if there is a sudden apparent change in

performance.

•Do not modify the speaker or speaker wires as

this can cause damage to the system.

•Do the procedures included in these instructions

when you attach the speakers.

•Do not touch the speaker cone’s reverberating

surfaces:

– This may damage the speaker cone.

– The speaker cone may be hot.

AKX710 GS TQBJ2138.book Page 4 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

5

TQBJ2138

5

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Making the connections

Connect the AC mains lead only after all the other connections have been made.

1Connect the AM loop antenna.

Stand the antenna up on its base until it clicks.

2Connect the FM indoor antenna.

Put the antenna where reception is best.

3Connect the speakers.

Connect the speaker cables to the corresponding

terminal.

4Connect the AC mains lead.

Do not use any other AC mains lead except the

supplied one.

Conserving power

The system consumes a small amount of power even

when it is in standby mode. Disconnect the power

supply if you do not use the system.

Some settings will be lost after you disconnect the

system. You have to set them again.

Note:

Keep the antennas away from the speaker cables and the AC

mains lead to avoid picking up noise.

4

SPEAKERS ( TO SB-AKX710 )

32

1

Adhesive tape

(not supplied)

SPEAKERS ( TO SB-AKX710 )

To household

mains socket

Attaching the ferrite core near to the terminal

APull on the tabs (both sides)

to open.

BPut the AC mains lead onto

one of the concave surfaces.

CCoil the AC mains lead

around the ferrite core and

onto the other concave

surface.

DClose the ferrite core until it

clicks.

Note:

Failure to attach the ferrite core to

the AC mains lead may cause

interference to other devices

nearby.

AKX710 GS TQBJ2138.book Page 5 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

6

TQBJ2138

6

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

AStandby/on switch [`], [1]

Press to switch the unit from on to standby mode or

vice versa. In standby mode, the unit is still consuming

a small amount of power.

BNumeric buttons

To select a 2-digit number

Example: 16: [ 10]=[1]=[6]

CDecrease the brightness of the display panel

The illumination effect is also switched off.

To cancel, press the button again.

DSelect the audio source

Press [SELECT <, >] (main unit: [SELECT])

repeatedly to select the source:

On the main unit:

To start Bluetooth® pairing, press and hold [ ].

EBasic playback control

FSelect DJ effect or DJ sampler

GView the content information

HSelect the Karaoke effects

ISelect MP3 album or track

Press [ALBUM/TRACK] to select album or track.

Browse tracks or albums

Press [R,T] or turn [MULTI CONTROL] to browse.

To start playback from the selection, press [4/9].

JView the setup menu

KRecording operation control

LOperate a Panasonic TV (compatible models only)

Point the remote control to a Panasonic TV:

[`/TV]: Switch on or switch off the TV

[AV/INPUT]: Change the video input mode of the TV

[VOL +/–]: Adjust the volume level of the TV

MAdjust the volume level

NMute the sound

To cancel, press the button again.

“MUTE” is also cancelled when you adjust the volume

or when you switch off the system.

OSelect the sound effects

PAdjust the microphone volume level

QSelect DJ jukebox or Karaoke jukebox

RSelect the illumination effects

SSelect or confirm the option

TView the play menu

USet the sleep timer

USB A USB B

MEMORY

D-INAUX

BLUETOOTH

FMCD

USB A USB B

BLUETOOTH

CD FM

AUX

MEMORY

AM

AKX710 GS TQBJ2138.book Page 6 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

7

TQBJ2138

7

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

VOpen or close the disc tray

WKnob for DJ and multi control

XDisc tray

YMicrophone jack

Z USB A

USB port ( )

USB status indicator

Play MP3 tracks.

a USB B

USB port ( )

USB status indicator

Play MP3 tracks.

Record sound or music tracks.

bDisplay panel

cRemote control sensor

Distance: Within approximately 7 m

Angle: Approximately 20° up and down,

30° left and right

dSelect the DJ function direct buttons

Press [JUKEBOX] or [DJ] to switch on the DJ function.

Press [DJ1] to [DJ6] on the main unit to select the

desired function.

To cancel, press the selected [DJ1] to [DJ6] again.

SOUND

KARAOKE

MIC VOL

VOL

SELECT

MIC 1 MIC 2

SOUND

K

M

VOL

SELECT

AKX710 GS TQBJ2138.book Page 7 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

8

TQBJ2138

8

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Preparing media

Disc

1Press [x] on main unit to open the disc tray.

Put in a disc with the label facing up.

Press again to close the disc tray.

2Press [SELECT <, >] repeatedly to select “CD”.

USB

Preparation

Before you connect a USB device to the system, make

sure you do a backup of the data.

1Decrease the volume and connect the USB device

to the USB port.

Hold the main unit when connecting or disconnecting

the USB device.

2Press [SELECT <, >] repeatedly to select “USB A”

or “USB B”.

USB status indicator lights up in red when selected.

Note:

•Do not use a USB extension cable. The system cannot

recognise USB device connected through a cable.

•Some devices cannot be charged as the maximum USB

charging current is 500 mA only.

Bluetooth

®

You can connect and play an audio device wirelessly

through Bluetooth®.

Preparation

• Switch on the main unit.

• Switch on the Bluetooth® feature of the device and put

the device near the system.

• Read the operating instructions of the device for details.

█

Pairing a device

Preparation

If this system is connected to a Bluetooth® device,

disconnect it (~8).

1Press [ ].

If “PAIRING” is shown, continue with step 3.

2Press [PLAY MENU] repeatedly to select

“PAIRING” and then press [OK].

3Select “SC-AKX710” from the Bluetooth® menu of

the device.

If prompted for a passkey, input “0000” or “1234”.

The device connects with this system automatically

after pairing is complete.

The MAC address (example: 6C:5A:B5:B3:1D:0F)

may be shown before “SC-AKX710” is shown.

The name of the connected device is shown for a few

seconds.

Using the main unit

1Press and hold [ ] until “PAIRING” is shown.

2Select “SC-AKX710” from the Bluetooth® menu of

the device.

Note:

You can pair up to 8 devices with this system. If a 9th device is

paired, the device that has not been used for the longest time

will be replaced.

█

Connecting a device

Preparation

If this system is connected to a Bluetooth® device,

disconnect it (~8).

1Press [ ].

“BLUETOOTH READY” is shown.

2Select “SC-AKX710” from the Bluetooth® menu of

the device.

The name of the connected device is shown for a few

seconds.

3Start playback on the device.

Note:

•A device must be paired to connect.

•This system can only connect to one device at a time.

•When “BLUETOOTH” is selected as the source, this system

will automatically try to connect to the last connected

device. (“LINKING” is shown during this process.)

█

Disconnecting a device

While a Bluetooth® device is connected

1Press [PLAY MENU] repeatedly to select

“DISCONNECT?”.

2Press [Y,U] to select “OK? YES” and then press

[OK].

“BLUETOOTH READY” is shown.

To cancel, select “OK? NO”.

Using the main unit

Press and hold [ ] until “PAIRING” is shown.

Note:

A device is disconnected when you:

•Select a different source.

•Move the device out of the maximum range.

•Disable the Bluetooth® transmission of the device.

•Switch off the system or the device.

AKX710 GS TQBJ2138.book Page 8 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

9

TQBJ2138

9

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Media playback

The following marks indicate the availability of the feature.

Basic playback

CD USB BLUETOOTH MEMORY

Note:

Depending on the Bluetooth® device, some operations may not

work.

Viewing available information

CD USB BLUETOOTH MEMORY

You can view the available information, such as MP3

album and track number, on the display panel.

Press [DISPLAY] repeatedly.

Example: MP3 album and track number display.

Note:

•Maximum characters that can be shown: Approximately 32

•This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.

•Text data that the system does not support can show

differently.

Play menu

CD USB MEMORY

1Press [PLAY MENU].

2Press [Y,U] to select the setting and then press

[OK].

Note:

•During random playback, you cannot skip to tracks which

have been played.

•The setting is cancelled when you open the disc tray or

disconnect the USB device.

CD :

USB :

BLUETOOTH :

MEMORY :

CD-R/RW in CD-DA format or with MP3 files.

USB device with MP3 files.

Bluetooth® device.

Internal memory (refer to “Recording” on page

11 for adding tracks to the internal memory).

Play Press [4/9].

Stop Press [8].

USB MEMORY

The position is memorised.

“RESUME” is shown.

Press again to stop fully.

Pause Press [4/9].

Press again to continue playback.

Skip Press [2/3] or [5/6] to skip track.

CD USB MEMORY

Press [R,T] to skip MP3 album.

Search Press and hold [2/3] or [5/6].

Album

number Track

number

OFF

PLAYMODE Cancel the setting.

1-TRACK

1 Play one selected track.

Press the numeric buttons to select the

track.

1-ALBUM

1 Play one selected MP3 album.

Press [R,T] to select the MP3 album.

RANDOM

RND Play all tracks randomly.

1-ALBUM

RANDOM

1 RND

Play all tracks in one selected MP3

album randomly.

Press [R,T] to select the MP3 album.

ALL REPEAT Repeat all tracks.

1-TRACK

REPEAT

1

Repeat 1-TRACK.

1-ALBUM

REPEAT

1

Repeat 1-ALBUM.

RANDOM

REPEAT

RND

Repeat random playback.

1-ALBUM

RANDOM

REPEAT

1 RND

Repeat 1-ALBUM RANDOM.

AKX710 GS TQBJ2138.book Page 9 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

10

TQBJ2138

10

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Link mode

BLUETOOTH

You can change the link mode to suit the connection type.

Preparation

If this system is connected to a Bluetooth® device,

disconnect it (~8).

1Press [PLAY MENU] repeatedly to select

“LINK MODE”.

2Press [Y,U] to select the mode and then press

[OK].

Note:

•When enjoying video contents with this function, the video

and audio output may not be synchronised. In this case,

select “MODE 1”.

•Select “MODE 1” if the sound is interrupted.

█

Note on disc

• This system can play CD-R/RW with CD-DA or MP3

format content.

• Before playback, finalise the disc on the device it was

recorded on.

• Some CD-R/RW cannot be played because of the

condition of the recording.

█

Note on USB device

• This system does not guarantee connection with all

USB devices.

• This system supports USB 2.0 full speed.

• This system can support USB devices of up to 32 GB.

• Only FAT 12/16/32 file system is supported.

█

Note on MP3 file

• Files are defined as tracks and folders are defined as

albums.

• Tracks must have the extension “.mp3” or “.MP3”.

• Tracks will not necessarily be played in the order you

recorded them.

• Some files can fail to work because of the sector size.

MP3 file on disc

• This system can access up to:

– 255 albums (including root folder)

– 999 tracks

– 20 sessions

• Disc must conform to ISO9660 level 1 or 2 (except for

extended formats).

MP3 file on USB device

• This system can access up to:

– 800 albums (including root folder)

– 8000 tracks

– 999 tracks in one album

Radio

Preparation

Press [SELECT <, >] repeatedly to select “FM” or “AM”.

Manual tuning

1Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2Press [Y,U] to select “MANUAL” and then press

[OK].

3Press [2/3] or [5/6] to tune in to the

station.

To tune automatically, press and hold the button until

the frequency starts changing quickly.

“STEREO” is shown when a stereo broadcast is being

received.

Memory presetting

You can preset up to 30 FM and 15 AM stations.

█

Automatic presetting

1Press [PLAY MENU] to select “A. PRESET”.

2Press [Y,U] to select “LOWEST” or “CURRENT”

and then press [OK].

The tuner presets all the stations it can receive into the

channels in ascending order.

To cancel, press [8].

█

Manual presetting

1Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2Press [Y,U] to select “MANUAL” and then press

[OK].

3Press [2/3] or [5/6] to tune in to the

station.

4Press [OK].

5Press the numeric buttons to select a preset

number.

Do steps 3 through 5 again to preset more stations.

The new station replaces any station that occupies the

same preset number.

MODE 1 Emphasis on connectivity.

MODE 2

(default) Emphasis on sound quality.

LOWEST Tuning begins from the lowest

frequency.

CURRENT Tuning begins from the current

frequency.

AKX710 GS TQBJ2138.book Page 10 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

11

TQBJ2138

11

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

█

Selecting a preset station

1Press [PLAY MENU] repeatedly to select

“TUNE MODE”.

2Press [Y,U] to select “PRESET” and then press

[OK].

3Press the numeric buttons, [2/3] or

[5/6] to select the preset station.

Improving the sound quality

When “FM” is selected

1Press [PLAY MENU] repeatedly to select

“FM MODE”.

2Press [Y,U] to select “MONO” and then press

[OK].

To cancel, select “STEREO”.

“MONO” is also cancelled when you change the

frequency.

To memorise the setting

Continue with step 4 of “Manual presetting”

(~10)

.

When “AM” is selected

1Press [PLAY MENU] repeatedly to select

“B.PROOF”.

2Press [Y,U] to select the setting that provides the

best reception and then press [OK].

Checking the signal status

When “FM” is selected

Press [DISPLAY].

AM allocation setting

By main unit only

This system can also receive AM broadcasts allocated in

10 kHz steps.

1Press [SELECT] repeatedly to select “AM”.

2Press and hold [SELECT].

After a few seconds, the display panel shows the current

minimum radio frequency. Release the button when the

minimum frequency changes.

• To go back to the initial setting, do the above steps

again.

• Preset frequencies are erased after you change the

setting.

Recording

This system can record up to 800 folders (maximum 999

tracks in an album) or a total of 8000 tracks, depending on

the available storage capacity of the internal memory or

the USB device in USB B .

To check storage space

In the stop mode, press [DISPLAY] repeatedly.

Example: Remaining recording time of the internal

memory.

• “UPDATE” is shown when the system is reading the

USB device.

• “NO DEVICE” is shown if there is no USB device

connected to USB B .

To select where recordings are kept

1Press [SETUP] repeatedly to select “REC TO?”.

2Press [Y,U] to select “MEMORY” or “USB B” and

then press [OK].

Note:

•All recordings are in “.mp3” format.

•You cannot do recording when you are using random

playback mode.

•The DJ function or Karaoke function is switched off when

you start recording.

•Repeat playback mode is cancelled during recording.

•A new album is added each time you do a recording.

•The sequence of album may change after the recording.

•The recordings are kept in a folder named “REC_DATA” in

the USB device or the internal memory.

•USB status indicator blinks in red during USB recording.

FM–––– The FM signal is weak.

The system is not tuned in to a station.

FM ST The FM signal is in stereo.

FM MONO “MONO” is selected as the “FM MODE”.

The FM signal is in monaural.

Remaining

recording time

Internal memory

source

AKX710 GS TQBJ2138.book Page 11 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

12

TQBJ2138

12

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Basic recording

1Select the source you want to record.

CD-DA

Prepare the disc playback mode.

Make sure the disc is stopped.

Radio

Tune in to the radio station.

AUX

Connect and play the equipment (~16).

2Press [REC 7/9] to start recording.

The name of the folder that keeps the recording is

shown.

Note:

•Wait for a few seconds for the system to prepare the USB

device before you start recording.

•When the next track of the disc is being recorded, it will be

shown on the display.

█

High-speed recording

CD-DA disc recording speed:

CD, CD-R: Three times (3x) the normal speed.

CD-RW: Two times (2x) the normal speed.

1Put in the disc you want to record.

2Press [REC MODE] to select “NORMAL” or

“HI-SPEED” and then press [OK].

3Press [REC 7/9] to start recording.

Note:

•If you cannot record at high-speed because of the condition

of the disc, record at normal speed.

•The sound is muted during high-speed recording.

█

Adding track marks

When recording from radio or AUX, you can divide tracks

using various modes.

Before recording

Press [REC MODE] to select the mode.

Note:

•During recording, if you press [OK] or pause recording while

using “TIME MARK” mode, the 5-minute counter is reset.

•You cannot add track marks manually in “SYNCHRO”

mode.

Recording MP3 tracks

You can record MP3 tracks from:

•MP3 disc to USB B or internal memory

• USB A to USB B or internal memory

• USB B to internal memory or vice versa

1Prepare the source you want to record.

2Press [REC 7/9] to start recording.

To check the recording progress, press [DISPLAY].

Note:

•Some tracks can use a longer time to record.

•Some tracks cannot be recorded because of the condition of

the source.

•The recorded file name is the same as the original file (only

a maximum of 32 characters can be shown on the display

panel).

Record all

tracks Select “OFF PLAYMODE” (~9).

Record a

specified track Select “1-TRACK” (~9).

Stop recording Press [8]. “WRITING” is shown.

Pause

recording Press [REC 7/9] during recording.

Press again to continue recording.

Note:

You can pause during recording from the

radio, AUX (except in “SYNCHRO” mode).

A track mark is added every time you

pause (~12).

MANUAL Add a track mark manually.

Press [OK] during recording to add a

track mark.

Note:

Recording is automatically divided in

60-minute per track.

SYNCHRO

(For AUX

source)

Recording starts automatically when

the other equipment starts to play.

Recording pauses when it detects

silence for 3 seconds.

TIME MARK A track is automatically divided at

5-minute intervals.

Record all

tracks Select “OFF PLAYMODE” (~9).

Record a

specified

album or track

Select “1-ALBUM” or “1-TRACK”

(~9).

Stop recording Press [8].

Recording stops at the last fully

recorded track in the album. For

example, if you stop recording during

the fourth track, only the first three

tracks are recorded.

“NO FILE RECORDED” is shown if no

track is recorded.

AKX710 GS TQBJ2138.book Page 12 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

13

TQBJ2138

13

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Deleting the recorded tracks

1Press [SELECT <, >] repeatedly to select

“MEMORY” or “USB B”.

2Press [R,T] to select the album.

3Press [2/3] or [5/6] to select the track.

4Press [EDIT MODE] to select the mode.

5Press [OK].

The selected item to be deleted is shown.

6Press [OK].

“SURE? NO” is shown.

7Press [Y,U] to select “SURE? YES” and then

press [OK].

“WRITING” is shown.

To cancel, select “SURE? NO”.

Sound effects

1Press [SOUND] to select the sound effect.

2Press [Y,U] to select the setting and then press

[OK].

Or turn [MULTI CONTROL] to select the setting.

Illumination

You can change the illumination effect on the system.

Press [ILLUMINATION] to select the desired effect.

You can also press [Y,U] to select the next or previous

effect and then press [OK].

Or turn [MULTI CONTROL] to select the effect.

DJ functions

You can use the DJ functions to add sound effect or

sample sound between songs.

Note:

The DJ function is switched off when you switch off the

system, change to another source or start recording.

DJ jukebox

USB MEMORY

You can use the DJ jukebox function to add cross-fade

effect or sample sound mix between songs.

1Press [JUKEBOX] to select “DJ JUKEBOX

SELECT NUMBER” or “ON DJ JUKEBOX”.

To cancel, select “OFF JUKEBOX”.

2Press [1] to [6] (main unit: [DJ1] to [DJ6]) to select

the effect.

To cancel, press the button again.

Note:

•The system switches to repeat mode automatically when

you switch on DJ Jukebox.

•The cross-fade function may not work between songs that

have different sampling frequencies.

TRACK DEL Delete a single track.

ALBUM DEL Delete one album (maximum 999

tracks).

FORMAT Format the USB device.

ALL DEL Delete all albums in the internal

memory.

PRESET EQ “ROCK”, “POP”, “AFRO BEAT”,

“ARABIC”, “PERSIAN”, “INDIA

BASS”, “DANGDUT”, “MALAY

POP”, “ELECTRONICA”,

“REGGAETON”, “SALSA”,

“SAMBA”, “FOOTBALL”,

“KARAOKE” or “FLAT”

BASS/MID/TREBLE –4 to +4

Note:

These settings can change when you

select a PRESET EQ setting.

SURROUND “ON SURROUND” or

“OFF SURROUND”

D.BASS LEVEL “OFF”, “LEVEL 1” to “LEVEL 6”

D.BASS BEAT “ON D.BASS BEAT” or

“OFF D.BASS BEAT”

Note:

•This function emphasises the

attack level of the drumbeat and

produces a punchy sound.

Depending on the track, the effect

may be small.

•This function does not work when

“D.BASS LEVEL” is set to “OFF”.

COLOR A selection of 6 different illumination colours

on the main unit.

AUTO Illuminate in one colour. The colour changes

automatically.

OFF Cancel the effect.

Using the “Panasonic MAX Juke” app

You can download and install the free Android™ app

“Panasonic MAX Juke” on Google Play™ for additional

features, such as to request song playback from multiple

devices simultaneously.

For details on the app, refer to the below site.

http://av.jpn.support.panasonic.com/support/global/

cs/audio/app/

(This site is in English only.)

[1] Cross-fade: The current track volume

gradually becomes soft, and the next

track volume gradually becomes loud.

[2] to [6] Sample sound mix: Sample sound is

added to the intervals of all tracks.

AKX710 GS TQBJ2138.book Page 13 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

14

TQBJ2138

14

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

█

Changing the repeat setting

1Press [PLAY MENU].

2Press [Y,U] to select the setting and then press

[OK].

Using the main unit

In the stop mode, turn [MULTI CONTROL] to select the

setting and then press [4/9].

Note:

You cannot select the DJ jukebox effect when you are using

“RANDOM MIX REPEAT” mode.

DJ effect

(Except for AUX source)

You can use the DJ effect function to add the sound

effects.

1Press [DJ] to select “DJ EFFECT SELECT

NUMBER” or “ON DJ EFFECT”.

To cancel, select “OFF EFFECT”.

2Press [1] to [6] (main unit: [DJ1] to [DJ6]) to select

the effect.

To cancel, press the button again.

3Press [Y,U] to select the setting.

Or turn [MULTI CONTROL] to select the setting.

DJ sampler

(Except for AUX source)

You can apply a scratch sound or sample sound to the

track you are playing.

1Press [DJ] to select “SAMPLER SELECT

NUMBER” or “ON SAMPLER”.

To cancel, select “OFF EFFECT”.

2Press [1] to [6] (main unit: [DJ1] to [DJ6]) to select

the desired sound.

To cancel, press the button again.

3Press [Y,U].

Or turn [MULTI CONTROL].

Using a microphone

Preparation

Decrease the volume of the system to its minimum before

you connect or disconnect a microphone.

1Connect a microphone (not supplied) to the

microphone jack.

Plug type: Ø 6.3 mm monaural

2Press [MIC VOL] and then press [Y,U] to adjust

the volume of the microphone.

If you want to sing with the background music.

3Play the music source and adjust the volume of

the system.

Note:

•If a strange noise (howling) is emitted, move the

microphone away from the speakers, or decrease the

volume of the microphone.

•When you do not use the microphone, disconnect it from the

microphone jack, and decrease the volume of the

microphone to its minimum.

•This system cannot record from microphone.

RANDOM REPEAT

RND Repeat random playback.

ALLTITLE REPEAT Repeat all tracks.

RANDOM MIX REPEAT

RND Repeat random playback.

Sample sound is added to the

intervals of all tracks.

Using the “Panasonic MAX Juke” app

You can call up the tracks you want to play through the

app.

[1] PHASER

Add space and dimension to the sound.

[2] FILTER

Enhance or filter specific ranges of the sound.

[3] SOUND CHOPPER

Cut off the sound periodically.

[4] ELECTRO ECHO

Add digital echo to the sound.

[5] PITCH SHIFTER

Adjust the keys of the sound.

[6] HARMONIZER

Add notes to the sound to create harmony.

Using the “Panasonic MAX Juke” app

You can change the sample sound on the app. (To return

all sample sounds to the factory preset, when in the stop

mode, press and hold [DJ] on the main unit until

“SAMPLER RESTORED” is shown.)

AKX710 GS TQBJ2138.book Page 14 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

15

TQBJ2138

15

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Karaoke

Preparation

Select the music source.

Note:

The Karaoke function is switched off when you switch off the

system or start recording.

Karaoke effect

You can use the Karaoke effect function to add the sound

effects.

1Press [KARAOKE] repeatedly to select the effect.

To check the current setting, press [OK].

2Press [Y,U] to select the setting and then press

[OK].

Or turn [MULTI CONTROL] to select the setting.

Note:

To use the Karaoke effect in AUX source, set “AUX MODE” to

“MODE 1” (~16).

Karaoke jukebox

You can use the Karaoke effect while using Karaoke

jukebox.

Press [JUKEBOX] to select “ON KARAOKE JUKEBOX”.

To cancel, select “OFF JUKEBOX”.

Note:

•The system switches to repeat mode automatically when

you switch on Karaoke jukebox.

•Karaoke jukebox is switched off when you change to

another source.

█

Changing the repeat setting

1Press [PLAY MENU].

2Press [Y,U] to select the setting and then press

[OK].

Using the main unit

In the stop mode, turn [MULTI CONTROL] to select the

setting and then press [4/9].

Clock and timers

Setting the clock

This is a 24-hour clock.

1Press [SETUP] to select “CLOCK”.

2Press [Y,U] to set the time and then press [OK].

To check the time

Press [SETUP] to select “CLOCK” and then press [OK].

In standby mode, press [DISPLAY].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP] to select the setting (in minutes).

To cancel, select “OFF”.

To check the remaining time

Press [SLEEP].

Note:

•The remaining time is shown for a few seconds every

minute. “SLEEP 1” is always shown when only 1 minute

remains.

•The sleep timer always comes first. Be sure not to set an

overlap of timers.

VOCAL CANCEL Reduce the vocal level or change

the audio mode (depending on

the source).

ECHO Add an echo effect to the sound.

KEY CONTROL Change the key of a song.

Note:

The setting is cancelled when you

change to another source.

TEMPO CD USB MEMORY

Change the speed of a song.

BGM Change the background music

level.

MIC EQ Select a MIC EQ mode.

OFF EFFECT Cancel the effect.

Press [OK] (main unit: [4/9]) to

confirm.

VOCAL CANCEL “OFF”, 1 to 3, “L”, “R”, “L+R”

When using stereo source not

formatted for Karaoke

It is recommended to use “2 VOCAL

CANCEL” for most songs.

When using Karaoke formatted

source

L: Only left channel sound

(accompaniment only)

R: Only right channel sound (vocals

only)

L+R: Left and right channel sounds

are mixed

ECHO “OFF”, 1 to 4

KEY CONTROL –6 to +6

TEMPO “OFF”, –2 to +2

BGM “OFF”, 1 to 3

MIC EQ “SINGING” or “SPEECH”

RANDOM REPEAT

RND Repeat random playback.

ALLTITLE REPEAT Repeat all tracks.

RANDOM MIX REPEAT

RND Repeat random playback.

Sample sound is added to the

intervals of all tracks.

AKX710 GS TQBJ2138.book Page 15 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

16

TQBJ2138

16

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Play timer and record timer

(Except for Bluetooth® and AUX source)

You can set the timer to come on at a certain time to:

• Wake you up (play timer).

• Record from the radio (record timer).

Play timer and record timer cannot be used together.

Preparation

Set the clock.

1Press [SETUP] repeatedly to select “TIMER ADJ”.

2Press [Y,U] to select “#PLAY” or “#REC” and

then press [OK].

3Press [Y,U] to set the start time and then press

[OK].

4Do step 3 again to set the end time.

5For play timer, press [Y,U] to select the source

you want to play and then press [OK].

6For record timer, press [Y,U] to select “MEMORY”

or “USB B” to keep the recording and then press

[OK].

To start the timer

1Prepare the source.

2Press [SETUP] repeatedly to select “TIMER SET”.

3Press [Y,U] to select the setting and then press

[OK].

“#” is shown.

The system must be switched off for the timer to

operate.

To check the setting

1Press [SETUP] repeatedly to select “TIMER ADJ”.

2Press [Y,U] to select “#PLAY” or “#REC” and

then press [OK].

In standby mode, press [DISPLAY] two times.

Note:

•The play timer starts at a low volume and increases

gradually to the preset level.

•The record timer starts 30 seconds before the set time with

the volume muted.

•The timer comes on at the set time every day if the timer is

on.

•If you switch off the system and then switch on again while a

timer is in operation, the timer will not stop at the end time.

External equipment

Preparation

• Disconnect the AC mains lead.

• Switch off all equipment and read the appropriate

operating instructions.

1Connect the external equipment.

2Press [SELECT <, >] repeatedly to select “AUX”.

3Play the external equipment.

Note:

•Components and cables are sold separately.

•If you want to connect equipment other than those

described, refer to the audio dealer.

•Sound distortion can occur when you use an adapter.

AUX mode

1Press [PLAY MENU] to select “AUX MODE”.

2Press [Y,U] to select the mode and then press

[OK].

Play timer Prepare the source you want to

listen to (disc, USB, internal memory

or radio) and set the volume.

Record timer Connect the USB device to USB B

(for USB recording) and tune in to

the radio station.

PLAY ON Start the play timer.

PLAY OFF Cancel the play timer.

REC ON Start the record timer.

REC OFF Cancel the record timer.

MODE 1

(default) Select this mode to use the Karaoke

effect function.

MODE 2 Select this mode when watching TV,

movies or using an external player with

Karaoke features.

Rear panel of

this main unit

Audio cable

(not supplied)

DVD player

(not supplied)

AKX710 GS TQBJ2138.book Page 16 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

17

TQBJ2138

17

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Others

Auto off

This system automatically switches off when you do not

use it for approximately 20 minutes.

1Press [SETUP] repeatedly to select “AUTO OFF”.

2Press [Y,U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

•This function does not work when you are in radio source or

when a Bluetooth® device is connected.

•This function may not work when a microphone is

connected.

Bluetooth

®

standby

This function automatically switches on the system when

you establish a Bluetooth® connection from a paired

device.

1Press [SETUP] repeatedly to select

“BLUETOOTH STANDBY”.

2Press [Y,U] to select “ON” and then press [OK].

To cancel, select “OFF”.

Note:

Some devices may take longer to respond. If you are

connected to a Bluetooth® device before switching off the

system, wait for a minimum of 5 seconds before connecting to

this system from your Bluetooth® device again.

Software update

Occasionally, Panasonic may release updated software

for this unit that may add or improve the way a feature

operates. These updates are available free of charge. For

more details, refer to the following website.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

█

Checking the software version

1Press [SETUP] repeatedly to select “SW VER.”

and then press [OK].

The software version is shown.

2Press [OK] again to exit.

Maintenance

Disconnect the AC mains lead before maintenance.

Clean this system with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this

system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Troubleshooting

Before requesting service, make the following checks. If

you are in doubt about some of the check points, or if the

solutions indicated do not solve the problem, consult your

dealer for instructions.

█

Common problems

The unit does not work.

•The safety device has been activated. Do the following:

1.Press [1] on the main unit to switch the unit to standby

mode. If the unit does not switch to standby mode,

disconnect the AC mains lead and then connect it again.

2.Press [1] again to switch on the unit. If the problem

persists, consult your dealer.

The display panel lights up and changes continuously in

standby mode.

•Press and hold [8] on the main unit to select “DEMO OFF”.

No operations can be done with the remote control.

•Examine that the battery is installed correctly.

Sound is distorted or no sound.

•Adjust the volume of the system.

•Switch off the system, determine and correct the cause, and

then switch on again. It can be caused by straining of the

speakers through excessive volume or power, and when

using the system in a hot environment.

A humming sound can be heard during playback.

•An AC mains lead or fluorescent light is near the cables.

Keep other appliances and cords away from the cables of

this system.

The sound level reduces.

•The protection circuit has been activated due to the

continuous use at high volume output. This is to protect the

system and maintain the sound quality.

█

Disc

Display not shown correctly.

Playback does not start.

•You have not put in the disc correctly. Put it in correctly.

•Disc is dirty. Clean the disc.

•Replace the disc if it is scratched, warped, or non-standard.

•There is condensation. Let the system dry for 1 to 2 hours.

The total number of tracks displayed is incorrect.

The disc cannot be read.

Distorted sound is heard.

•You put in a disc that the system cannot play. Change to a

playable disc.

•You put in a disc that has not been finalised.

█

USB

The USB device or the contents in it cannot be read.

•The format of the USB device or the contents in it are not

compatible with the system.

•USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

•Large content size or large memory USB device takes

longer time to read.

AKX710 GS TQBJ2138.book Page 17 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

18

TQBJ2138

18

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

█

Bluetooth

®

Pairing cannot be done.

•Check the Bluetooth® device condition.

•The device is out of the 10 m communication range. Move

the device nearer to the system.

The device cannot be connected.

•The pairing of the device was unsuccessful. Do pairing

again.

•The pairing of the device has been replaced. Do pairing

again.

•This system might be connected to a different device.

Disconnect the other device and try connecting the device

again.

•The system may have a problem. Switch off the system and

then switch on again.

•If “MODE 2” is selected in “LINK MODE”, select “MODE 1”

(~10).

The device is connected but audio cannot be heard

through the system.

•For some built-in Bluetooth® devices, you have to set the

audio output to “SC-AKX710” manually. Read the operating

instructions of the device for details.

Sound from the device is interrupted.

•The device is out of the 10 m communication range. Move

the device nearer to the system.

•Remove any obstacle between the system and the device.

•Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.) are

interfering. Move the device nearer to the system and

distance it from the other devices.

•Select “MODE 1” for a stable communication (~10).

█

Radio

Sound is distorted.

•Use an optional FM outdoor antenna. The antenna should

be installed by a competent technician.

A beat sound is heard.

•Switch off the TV or move it away from the system.

•Move mobile telephones away from the system if the

interference is apparent.

•When in AM tuner mode, select the “B.PROOF” setting that

provides the best reception.

A low hum is heard during AM broadcasts.

•Move the antenna away from other cables and cords.

█

AUX

Playback image and sound are not synchronised.

•Set “AUX MODE” to “MODE 2”.

Karaoke effect cannot be used.

•Set “AUX MODE” to “MODE 1”.

█

Main unit displays

“--:--”

•You connected the AC mains lead for the first time or there

was a power failure recently. Set the clock.

•Track play time is more than 99 minutes.

“ADJUST CLOCK”

•The clock is not set. Adjust the clock.

“ADJUST TIMER”

•The play timer and/or record timer is not set. Adjust the play

timer and/or record timer.

“ALB FULL”

•The number of albums has exceeded the supported limit.

“AUTO OFF”

•The system has not been used for 20 minutes and will

switch off within a minute. To cancel, press any button.

“CAN’T REC”

“DEVICE FULL”

•You cannot do recording because the remaining recording

time of the USB device is less than the total time of the

music source. Change to a USB device which has enough

recording time and do the recording again.

•You cannot do recording because the USB device is

write-protected. Remove the write protection of the USB

device and try again.

“ERROR”

•An incorrect operation was done. Read the instructions and

try again.

“ERROR” (during recording)

•You cannot select other playback source (example: radio,

USB etc.) or press [2/3] or [5/6] during

recording. Stop the recording function.

•You cannot open the disc tray when recording from an AM

source.

“F ” / “F ” (“ ” represents a number.)

•The protection circuit has been activated and the system

may be switched off automatically.

•Disconnect the AC mains lead and wait for a few seconds

before connecting it again. If the problem persists,

disconnect the AC mains lead and consult your dealer.

“INSERT USB B”

•You cannot do recording because there is no USB device

connected to USB B .

“MEMORY ERROR”

•The files in the internal memory can be corrupted. Switch off

the system and then disconnect the AC mains lead. Wait for

a minimum of 1 minute before switching on the system

again. If the problem persists, press [EDIT MODE] to select

“ALL DEL” to delete all albums in the internal memory and

do recording again.

“NO DEVICE”

•You cannot check available storage space because there is

no USB device connected to USB B .

“NO DISC”

•You have not put in a disc.

AKX710 GS TQBJ2138.book Page 18 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

19

TQBJ2138

19

ENGLISH

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

“NO PLAY”

“UNSUPPORT”

•There is no album or track in the USB device.

•Examine the content. You can only play supported format.

•The files in the USB device can be corrupted. Format the

USB device and try again.

•The system may have a problem. Switch off the system and

then switch on again.

“NO TRACK”

•There is no album or track in the internal memory.

“NOT SUPPORTED”

•To use Karaoke effect in AUX source, set “AUX MODE” to

“MODE 1”.

“PLAYERROR”

•An unsupported MP3 file has been played. The system will

skip that track and play the next one.

“REC ERROR”

•You disconnected the USB device during recording.

Connect the USB device and do recording again.

•An error occurred during USB recording. Disconnect the

USB device and then connect it again.

“REMOTE 1”

“REMOTE 2”

•The remote control and the main unit are using different

codes. Change the code of the remote control.

–When “REMOTE 1” is shown, press and hold [OK] and [1]

for a minimum of 4 seconds.

–When “REMOTE 2” is shown, press and hold [OK] and [2]

for a minimum of 4 seconds.

“TEMP NG”

•The temperature protection circuit has been activated, and

the system will switch off. Let the unit cool down before

switching it on again.

•Check that the ventilation opening of the unit is not

obstructed.

•Ensure this unit is well ventilated.

“TRK FULL”

•The number of files has exceeded the supported limit.

“USB A NO DEVICE”

“USB B NO DEVICE”

•The USB device is not connected. Examine the connection.

“USB OVER CURRENT ERROR”

•The USB device is drawing too much power. Disconnect the

USB device, switch off the system and then switch on again.

•Check the connection, it may be caused by a faulty USB

cable.

“VBR”

•The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

Remote control code

When other Panasonic equipment responds to the remote

control of this system, change the remote control code for

this system.

Preparation

Press [SELECT <, >] repeatedly to select “AUX”.

█

To set the code to “REMOTE 2”

1Press and hold [SELECT] on the main unit and [2]

on the remote control until “REMOTE 2” is shown.

2Press and hold [OK] and [2] for a minimum of

4 seconds.

█

To set the code to “REMOTE 1”

1Press and hold [SELECT] on the main unit and [1]

on the remote control until “REMOTE 1” is shown.

2Press and hold [OK] and [1] for a minimum of

4 seconds.

System memory reset

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1Disconnect the AC mains lead.

2While you press and hold [1] on the main unit,

connect the AC mains lead again.

Continue to press and hold the button until

“–––––––––” is shown.

3Release [1].

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

AKX710 GS TQBJ2138.book Page 19 Thursday, July 12, 2018 10:50 AM

offset printing

Confidential

Until:

1 Aug 2018

20

TQBJ2138

20

D:\PSG\Amalina PSG job\AKX710 GS data\AKX710 GS TQBJ2138 EN.fm

Specifications

█

General

Dimensions (W x H x D) 458 mm x 137 mm x 341 mm

Mass (SA-AKX710) 4.0 kg

Operating temperature range 0°C to +40°C

Operating humidity range

35% to 80% RH (no condensation)

█

Amplifier section

RMS output power stereo mode

Front Hi (both ch driven)

500 W per channel (2 Ω), 1 kHz, 30% THD

Front Lo (both ch driven)

500 W per channel (2 Ω), 100 Hz, 30% THD

Total RMS stereo mode power 2000 W

PMPO output power 22000 W

█

Tuner section

Frequency modulation (FM)

Preset memory 30 stations

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 75 Ω (unbalanced)

Amplitude modulation (AM)

Preset memory 15 stations

Frequency range 522 kHz to 1629 kHz (9 kHz step)

520 kHz to 1630 kHz (10 kHz step)

█

Disc section

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3 )

MPEG-1 Layer 3, MPEG-2 Layer 3

Pick up

Wavelength 790 nm (CD)

█

Terminal section

USB port

USB standard USB 2.0 full speed

Media file format support MP3 (*.mp3)

USB device file system FAT12, FAT16, FAT32

USB recording

Bit rate 128 kbps

USB recording speed 1x, 3x (CD only)

Recording file format MP3 (*.mp3)

AUX

Audio input Pin jack (1 system)

Microphone

Terminal Mono, 6.3 mm jack (2 systems)

█

Internal memory section

Memory

Memory size 4 GB

Media file format support MP3 (*.mp3)

Memory recording

Bit rate 128 kbps

Memory recording speed 1x, 3x (CD only)

Recording file format MP3 (*.mp3)

█

Bluetooth

®

section

Version Bluetooth® Ver. 2.1 + EDR

Class Class 2

Supported profiles A2DP, AVRCP, SPP, OPP, FTP

Operating frequency 2.4 GHz band FH-SS

Frequency band 2402 MHz to 2480 MHz

Maximum power (EIRP) 4 dBm

Operation distance 10 m line of sight

Supported codec SBC

█

Speaker section

Speaker unit(s)

Super Woofer 20 cm cone type

Woofer 8 cm cone type

Tweeter 6 cm cone type

Impedance High 2 Ω / Low 2 Ω

Dimensions (W x H x D) 313 mm x 425 mm x 264 mm

Mass 6.9 kg

Note:

•Specifications are subject to change without notice.

Mass and dimensions are approximate.

•Total harmonic distortion is measured by the digital

spectrum analyser.

Power supply

Power consumption

AC 220 V to 240 V, 50/60 Hz

225 W

Power consumption in standby mode (approximate)

With “BLUETOOTH STANDBY” set to “OFF” 0.5 W

With “BLUETOOTH STANDBY” set to “ON” 0.6 W

AKX710 GS TQBJ2138.book Page 20 Thursday, July 12, 2018 10:50 AM

offset printing

Страница загружается ...

Panasonic SC-AKX710 Руководство пользователя

Panasonic SC-AKX710 Руководство пользователя

Похожие модели бренда

Модели других брендов