4
Instruction manual
regulator.
• To adjust volume, rotate VOLUME
regulator.
• To switch off the radio, set MP3/FM/AM
switch to MP3 position.
Alarm operation
Setting the alarm
• In clock mode press MODE button twice to
go to alarm setting mode; the word ALARM will
be displayed. The alarm is in OFF state and
12:00 is set by default.
• Press repeatedly SET button to go to
setting of parameters in following sequence:
alarm hour => alarm minute => alarm sound
(one of 7 melodies or 2 beep sounds) =>
cancel. The selected parameter will blink
meaning readiness for adjustment.
• Press
button to increase the parameter.
Press
button to decrease the parameter.
• In alarm time setting mode, if no button is
pressed within 1 minute after a parameter is
selected, the unit will automatically return to
clock mode.
• In alarm setting mode, press repeatedly
MODE button to return to clock mode.
Alarm switch-off and snooze
• The alarm can only sound if BUZZ/HI-FI
switch is set to BUZZ position.
• Press
button to enable/disable the
snooze function. When enabled, SNOOZE will
be displayed.
• If snooze is disabled, when the alarm
signal is on, it will sound for 1 minute. Press
any button to stop the alarm.
• If snooze is enabled, when the alarm
signal is on, it will sound for 1 minute every
3 minutes. Press any button to interrupt the
alarm. SNOOZE will be flashing. The alarm will
restart after 3 minutes. This can be repeated
up to 4 times.
• When the snooze alarm signal is on, press
MODE button to stop the alarm and cancel the
snooze function. SNOOZE will stop flashing.
Birthday reminder
• In clock mode press MODE button three
times to enable birthday reminder setting
mode. Press repeatedly SET button to go to
setting of parameters in following sequence:
hour => minute => year => month => date
=> cancel. The selected parameter will blink
meaning readiness for adjustment.
• Press button to increase the parameter.
Press button to decrease the parameter.
• Day of week will be set automatically.
• In setting mode, if no button is pressed
within 1 minute after a parameter is selected,
the unit will automatically go to clock mode.
• In setting mode, press MODE button
repeatedly to return to clock mode.
• When the set date comes, “Happy birthday
to you“ melody will sound for 5 minutes. To
stop it, press any button.
Timer
• In clock mode press MODE button four
times to go to timer setting mode; the word
TIMER will be displayed.
• Press repeatedly SET button to go to
setting of parameters in following sequence:
timer hour => timer minute => start => cancel.
The selected parameter will blink meaning
readiness for adjustment.
• Press button to increase the parameter.
Press button to decrease the parameter.
You can set timing for 23 hours 59 minutes as
maximum and 1 minute as minumum.
• In timer setting mode, if no button is
pressed within 1 minute after a parameter is
selected, the unit will automatically return to
clock mode.
• In timer setting mode, press MODE button
to return to clock mode.
• After the timer is started, seconds will
be counted down in the temperature display.
Hours and minutes will be counted down in the
main display. After the set time is out (arrives
at 0:00), the alarm will sound for 1 minute.
Press any button to stop the alarm.