Yamaha RX-V1067 Инструкция по применению

1

3

2

within 6 m

- 1 -

English

Quick Reference Guide

for Asia*, Africa, Oceania

and Latin America

*Except for China and Korea

E.g. E.g.

Preparing the remote control

■

Accessories

■

Items necessary for connection

The following accessories are supplied with this product.

Speakers

External components

Remote control

Front speaker

E.g. E.g.

Batteries (2)

(AAA, R03, UM-4)

Center speaker

AM loop antenna

Surround speaker, surround back

speaker, and presence speaker

Indoor FM antenna

Active subwoofer

Power cable*

1

Take off the battery compartment cover.

2

Insert the two supplied AAA batteries

into the battery case, following the

polarity markings.

3

Snap the battery compartment cover

back into place.

Be sure to aim the remote control directly at the remote

control sensor on this unit during operation.

TV

Cable

• Cables for connecting external components

(may differ depending on the components you are connecting)

• Speaker cables

(a quantity to match the number of speakers you are connecting)

• Audio pin cable

(for subwoofer)

Playback device such as BD

(Blu-ray Disc)/DVD players

• Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker

impedance, refer to page 3.

• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.

• Prepare at least two front speakers. The priority of the other speakers is as follows:

1 Two surround speakers

2 One center speaker

3 One (or two) surround back speaker(s)/presence speakers

YPAO microphone

* The  gure of the supplied power cable may differ depending upon regions.

7.1

6.1

7.1

- 2 -

Connect and install as follows the  rst time you use this unit.

See the following explanations for the connections for each number.

1

Connect the speakers

2

Connect a TV

3

Connect playback devices such as BD/DVD players and recorders

4

Set the VOLTAGE SELECTOR and connect the power cable

(General model)

Connect the power cable

(Other models)

5

Set up the speaker parameters automatically (YPAO)

This unit

TV

Subwoofer

1

2

3

4

BD/DVD player

(recorder)

Center speaker

Surround

speaker R

Surround

speaker L

Surround back

speaker L

Surround back

speaker

Surround back

speaker R

Front

speaker R

Front

speaker L

7.1

Connect when using with 7.1-channel speaker

layout. Place the surround back speakers

(L/R) 30 cm or more away from each other.

6.1

Connect when using with 6.1-channel speaker

layout. Place the surround back speaker

behind the listening position.

AC

SURROUND SURROUND BACK/

SPEAKERS

CENTER

AV 1 AV 2 AV 3 AV 4

HDMI

AV 5 AV 6 AV 7

SINGLE

FRONT

BI-AMP

AV 3

AV 4

F

RONT

SURROUND

SUR. BACK

SUBWOOFER

CENTER

MULTI CH INPUT

COMPONENT VIDEO

MONITOR OUT/ZONE OUT

ZONE OUT PRE OUT

ZONE 2

YP

B

P

R

P

B

P

R

YP

B

P

R

C

D

SURROUND

SUR. BACK

CENTER

SUBWOOFER

1

2

RS-232C

2

1

TRIGGER

OUT

+12V 0.1A MAX.

FRONT

(1 BD/DVD)

(SINGLE)

ZONE2/

F.PRESENCE

EXTRA SP

IN

OUT

REMOTE

A

C

S

P

E

A

K

E

R

S

A

V

A

1

A

V

A

2

A

V

A

3

A

V

A

4

H

D

M

I

A

V

A

5

A

V

A

6

A

V

A

7

A

V

A

3

A

V

A

4

F

R

O

N

T

S

U

R

O

U

N

D

S

U

R

.

B

A

C

K

S

U

B

W

O

F

E

R

C

E

N

T

E

R

M

U

L

T

L

I

C

H

I

N

P

U

T

C

O

M

P

O

N

E

N

T

V

I

D

E

O

M

O

N

I

T

O

R

O

U

T

/

T

Z

/

O

N

E

O

U

T

Z

O

N

E

O

U

T

P

R

E

O

U

T

Z

O

N

E

2

Y

P

B

P

R

P

B

P

R

Y

P

B

P

R

C

D

S

U

R

O

U

N

D

S

U

R

.

B

A

C

K

C

E

N

T

E

R

S

U

B

W

O

F

E

R

2

R

S

-

2

3

2

C

2

1

T

R

I

G

E

R

O

U

T

+

1

2

V

0

.

1

A

M

A

X

.

F

R

O

N

T

(

1

B

D

/

D

V

D

)

(

S

I

N

G

L

E

)

Z

O

N

E

2

/

F

.

F

P

R

E

S

E

N

C

E

X

T

R

A

S

P

I

N

O

U

T

R

E

M

O

T

E

6.1

7.1 7.1

- 3 -

1

Connect the speakers

Front speaker

R L

Subwoofer

Center speaker

R L

Surround back

speaker

R L

Surround

speaker

Connecting speakers

Connecting the subwoofer

1

Connect the subwoofer input jack to the

SUBWOOFER 1 jack on this unit with an audio

pin cable.

(

SINGLE

)

SUBWOOFER

PRE OUT

CENTER

SUR. BACKSURRUND

1

2

FRONT

• When connecting the presence speakers, refer to “Presence speaker

connection” in the Owner’s Manual.

• This unit can connect speakers that support Bi-amp connection for front

speakers. Refer to “Bi-amp connection” in the Owner’s Manual.

7.1

Connect when using with 7.1-channel speaker layout.

6.1

Connect when using with 6.1-channel speaker layout.

2

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than half).

Crossover frequency (if available): Set to maximum.

Subwoofer examples

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Caution:

• Remove the power cable of this unit from the power outlet before

connecting the speakers.

• Generally speaker cables consist of two parallel insulated

cables. One of these cables is a different color, or has a line

running along it, to indicate different polarity. Insert the different

colored (or lined) cable into the “+” (positive, red) terminal

on this unit and the speakers, and the other cable into the “-”

(minus, black) terminal.

• Be careful that the core of the speaker cable does not touch

anything or come into contact with the metal areas of this unit.

This may damage this unit or the speakers. If the speaker cables

short circuit, “CHECK SP WIRES!” will appear on the front panel

display when this unit is switched on.

• This unit is con gured for 8Ω speakers at the factory setting.

When connecting 6Ω speakers, con gure the speaker impedance

setting of this unit to 6Ω. When this unit is con gured for 6Ω

speakers, 4Ω speakers can also be used as the front speakers.

For more information on setting the speaker impedance, refer to

“Changing speaker impedance” in the Owner’s Manual.

FRONT

-

2

3

1

4

+

1

Remove approximately 10 mm of insulation from

the ends of the speaker cables, and twist the bare

wires of the cables together  rmly so that they will

not cause short circuits.

2

Loosen the speaker terminals.

3

Insert the bare wire of the speaker cable into the

gap on the side of the terminal.

4

Tighten the terminal.

SURROUND SURROUND BACK/

SPEAKERS

C

AV 1

HDMI OUT

AV 2 AV 3 AV 4

HDMI

AV 5

SINGLE

BI-AMP

12

AV 3

AV 4

C

AL

OPTICAL

AUDIO 1

(2 TV)

(3 CD)

AUDIO 2 AUDIO 3 AUDIO 4

FRONT

SURROUND

SUR. BACK

SUBWOOFER

CENTER

MULTI CH INPUT

COMPONENT VIDEO

COAXIAL

MONITOR OUT/ZONE OUT

ZONE OUT PRE OUT

ZONE 2

AV OUT

YP

B

P

R

YP

B

P

R

YP

B

P

R

C

D

SURROUND

SUR. BACK

MON.OUT/ZONE OUT

ARC ARC

SELECTABLE

FRONT

(1 BD/DVD)

AV 1

AV 2

B

A

Ԝԝ

(SINGLE)

IN

RE

M

S

U

R

O

U

N

D

S

U

R

O

U

N

D

B

A

C

K

/

KK

S

P

E

A

K

E

R

S

C

A

V

A

1

A

V

A

2

A

V

A

3

A

V

A

4

H

D

M

I

A

V

A

5

S

I

N

G

L

E

B

I

-

A

M

P

A

V

A

3

A

V

A

4

C

A

L

O

P

T

I

C

A

L

A

U

D

I

O

1

(

2

T

V

)

(

3

C

D

)

A

U

D

I

O

2

A

U

D

I

O

3

A

U

D

I

O

4

F

R

O

N

T

S

U

R

O

U

N

D

S

U

R

.

B

A

C

K

S

U

B

W

O

F

E

R

C

E

N

T

E

R

M

U

L

T

L

I

C

H

I

N

P

U

T

C

O

M

P

O

N

E

N

T

V

I

D

E

O

C

O

A

X

I

A

L

Z

O

N

E

O

U

T

P

R

E

O

U

T

Z

O

N

E

2

A

V

A

O

U

T

Y

P

B

P

R

Y

P

B

P

R

C

D

S

U

R

O

U

N

D

S

U

R

.

B

A

C

K

F

R

O

N

T

(

1

B

D

/

D

V

D

)

A

V

A

1

A

V

A

2

B

A

Ԝ

ԝ

(

S

I

N

G

L

E

)

I

N

R

E

M

VIDEO

S VIDEO

COMPONENT

VIDEO

HDMI

Y

P

R

P

R

Y

P

B

P

B

V

S

* For details on selecting the active HDMI OUT jack, refer to “Selecting the active HDMI OUT jack” in the Owner’s Manual.

A When the HDMI input

is available.*

B When the component

video input is available.

C

When the S-video input is

available.

D

When only the video input

is available.

- 4 -

2

Connect a TV

Listening to TV audio

To play back TV audio on this unit, connect the TV audio output to this unit.

Connect the following input jacks, matching the audio output jacks on your TV.

When viewing your TV, select the appropriate input source on this unit.

HDMI OUT

12

O

(1 BD/DVD)

AV 1

KNETWORK

AV 2 AV 3 AV 4

COAXIAL COAXIAL

OPTICAL OPTICAL

OPTICAL

AUDI O 1

(2 TV)

(3 CD)

AUDIO 2 AUDIO 3 AUDIO 4

COAXIAL

AV O UT

Y

MON.OUT/ZONE OUT

ARC ARC

SELECTABLE

AV 1

AV 2

B

A

ԘԙԚԛ Ԝԝ

ANTENNA

75

GND

AMFM

(4 RADIO)

O

(

1

B

D

/

D

V

D

)

A

V

A

1

K

N

E

T

W

O

R

K

A

V

A

2

A

V

A

3

A

V

A

4

C

O

A

X

I

A

L

C

O

A

X

I

A

L

O

P

T

I

C

A

L

O

P

T

I

C

A

L

A

V

A

O

U

T

Y

M

O

N

.

O

U

T

/

T

Z

/

O

N

E

O

U

T

A

V

A

1

A

V

A

2

B

A

Ԙ

ԙ

Ԛ

ԛ

A

N

T

E

N

A

7

5

G

N

D

A

M

F

M

(

4

R

A

D

I

O

)

OPTICAL

O

Audio

output

Audio output from TV Input jack on this unit

Optical digital output

AUDIO1

Coaxial digital output

AUDIO2

Analog output

AUDIO1

,

AUDIO2

, AUDIO3, or AUDIO4

HDMI Audio Return Channel

(Described in the right column)

HDMI OUT1 or HDMI OUT2

✽ Connecting to AUDIO1 allows you to playback TV audio just by pressing

the SCENE2 key.

When using a TV that supports the Audio Return Channel

function and HDMI Control function

When using an HDMI compatible TV that supports

Audio Return Channel functions and / or HDMI Control functions

(e.g., Panasonic VIERA Link), you can enjoy the TV sound on this

unit.

The audio / video output from the unit to the TV and audio output

from the TV to the unit are possible using a single HDMI cable.

The input source is switched automatically to match operations

carried out on the TV, and that makes TV sound control easier to

use.

For the connections and settings, refer to “Using the HDMI Control

function” in the Owner’s Manual.

If your TV has multiple inputs, connect with the following priority (A to D).

When connecting to an HDMI compatible TV

Video signal such as component video, S-video and video received by

this unit is converted to HDMI and output to the TV. Just select HDMI

input on the TV to view video from any external source connected to

this unit.

HDMI

COMPONENT

VIDEO

HDMI

VIDEO

S VIDEO

Input Output

HDMI input

Through

Converted

TV

For more information on video signal conversion, refer to “Connecting a TV monitor” in the Owner’s Manual.

When connecting to a non-HDMI compatible TV

Connect to the TV using the same type of connection that you used to

connect to the playback device.

If the playback device and TV are equipped with different types of

analog video jacks, this unit will convert the video signals to another

type of video signal according to the type of video input jacks used

on the TV.

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

S VIDEO

Input Output

Component

video input

S-video input

Video input

Through

Converted

TV

Refer “Connecting BD/DVD players and other devices” in Owner’s Manual for details on connection other than above illustration.

• When playing back a device, select the corresponding input source to which the jack is connected.

• If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from

component video output jacks and audio from analog output jacks. Refer to “Connecting external components” in the Owner’s Manual for details.

• At the default settings, input sources and sound programs are preset on the SCENE keys. When a playback device is connected to AV1,

pressing the SCENE1 key selects the AV1 input. When a playback device is connected to AUDIO2, pressing the SCENE3 selects the AUDIO2

input. The input source and sound program preset on the SCENE key can be changed.

Default scene settings

SCENE Input Audio Select HDMI Output

Sound

Program

Pure Direct

Mode

Tone Control Adaptive DRC Enhancer

1 (BD/DVD) AV1 Auto OUT1+2 Drama Auto

Bass:0.0dB

Trebele:0.0dB

On Off

2 (TV) AUDIO1 Auto OUT1+2 STRAIGHT Auto

Bass:0.0dB

Trebele:0.0dB

On On

3 (CD) AUDIO2 Auto OUT1+2 STRAIGHT Auto

Bass:0.0dB

Trebele:0.0dB

Off Off

4 (RADIO) TUNER --- OUT1+2 STRAIGHT Auto

Bass:0.0dB

Trebele:0.0dB

Off On

The several settings other than ones in the above table can be assigned to the SCENE keys. For more information on the SCENE function, refer to “Changing input

settings with a single key (SCENE function)” in the Owner’s Manual.

AUDIO

VIDEO

COMPONENT

VIDEO

COAXIAL

OPTICAL

COMPONENT

VIDEO

HDMI

ANTENNA

75

GND

AMFM

(4 RADIO)

SURROUND

AV 1

HDMI OUT

AV 2 AV 3

12

PHONO

GND

(1 BD/DVD)

AV 1

DOCK NETWORK

AV 2 AV 3 AV 4

AV 3

AV 4

COAXIAL COAXIAL

OPTICAL OPTICAL

OPTICAL

AUDI O 1

(2 TV)

(3 CD)

AUDIO 2 AUDIO 3 AUDIO 4

FRONT

SURROUND

SUR. BACK

SUBWOOFER

CENTER

MULTI CH INPUT

COMPONENT VIDEO

COAXIAL

ZON

E

ZONE 2

AV OUT

YP

B

P

R

YP

B

P

R

C

D

MON.OUT/ZONE OUT

ARC ARC

SELECTABLE

(1 BD/DVD)

AV 1

AV 2

B

A

ԘԙԚԛ Ԝԝ

A

N

T

E

N

A

7

5

G

N

D

A

M

F

M

(

4

R

A

D

I

O

)

S

U

R

O

U

N

D

H

D

M

I

O

U

T

A

V

A

2

A

V

A

3

1

2

P

H

O

N

O

G

N

D

(

1

B

D

/

D

V

D

)

A

V

A

1

D

O

C

K

N

E

T

W

O

R

K

A

V

A

2

A

V

A

3

C

O

A

X

I

A

L

O

P

T

I

C

A

L

O

P

T

I

C

A

L

A

U

D

I

O

1

(

2

T

V

)

(

3

C

D

)

A

U

D

I

O

2

A

U

D

I

O

3

A

U

D

I

O

4

F

R

O

N

T

S

U

R

O

U

N

D

S

U

R

.

B

A

C

K

S

U

B

W

O

F

E

R

C

E

N

T

E

R

M

U

L

T

L

I

C

H

I

N

P

U

T

C

O

M

P

O

N

E

N

T

V

I

D

E

O

C

O

A

X

I

A

L

Z

O

N

E

Z

O

N

E

2

A

V

A

O

U

T

Y

P

B

P

R

A

V

A

4

D

M

O

N

.

O

U

T

/

TT

Z

/

O

N

E

O

U

T

A

R

C

A

R

C

S

E

L

E

C

T

A

T

B

L

E

A

V

A

1

A

Ԙ

ԛ

Ԝ

ԝ

O

R

C

V

L

O

C

O

P

R

Y

P

R

YP

B

HDMI

P

B

P

B

P

B

P

R

Y

P

R

Y

A

When the HDMI output is

available.

B

When the component video

output is available (with optical

digital audio output).

C

When the component video

output is available (with coaxial

digital audio output).

D

When only the video input

is available (with the analog

audio output).

- 5 -

3

Connect playback devices such as BD/DVD players and recorders

If your playback device has multiple audio/video outputs, connect with the following priority

(A to D) to enjoy a higher quality sounds and images.

Plug the supplied

power cable into

the AC inlet after all

other connections

are complete, then

plug the power

cable into an AC

wall outlet.

AC IN

RS-232C

2

1

T

RIGGER

OUT

V

0.1A MAX.

ZONE2/

F.PRESENCE

EXTRA SP

A

C

I

N

R

S

-

2

3

2

C

2

1

T

R

I

G

E

R

O

U

T

V

0

.

1

A

M

A

X

.

Z

O

N

E

2

/

F

.

F

P

R

E

S

E

N

C

E

X

T

R

A

S

P

VOLTAGE SELECTOR

110V-

120V

220V-

240V

VOLTAGE SELECTOR

(General model only)

Select the switch position according to your local

voltage using a straight slot screwdriver.

Voltages are AC 110-120/220-240 V, 50/60 Hz.

Caution

The VOLTAGE SELECTOR on the rear

panel of this unit must be set for your local

voltage BEFORE plugging the power cable

into the AC wall outlet. Improper setting of the

VOLTAGE SELECTOR may cause damage

to this unit and create a potential  re hazard.

4

Set the VOLTAGE SELECTOR and connect the power cable

(General model)

Connect the power cable (Other models)

AC IN

RS-232C

2

1

T

RIGGER

OUT

V

0.1A MAX.

ZONE2/

F.PRESENCE

EXTRA SP

R

S

-

2

3

2

C

2

1

T

R

I

G

E

R

O

U

T

V

0

.

1

A

M

A

X

.

Z

O

N

E

2

/

F

.

F

P

R

E

S

E

N

C

E

X

T

R

A

S

P

Power cable

To the AC wall outlet

Continues to

the next page

- 6 -

When all connections are complete, adjust the con guration, sizes, and volume

balance of the speakers to provide an optimal sound  eld. This unit is equipped with a

Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker

balance automatically with a simple procedure.

Be aware of the following when using YPAO.

• The amount of time for measurement varies from about two to ten minutes according to settings.

• The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others.

• Take care that the test tone does not frighten small children.

YPAO operations can be viewed on the front panel display or TV screen. TV display is used here to explain operation.

1

Check the following before using YPAO.

This unit

• The headphones are removed.

TV

• This unit is connected to the TV correctly.

• The power is turned on.

• The video input to which the video output

from this unit has been selected.

Subwoofer

• The power is turned on.

• Volume is set to approximately half, and the

cross-over frequency (if present) is set to

maximum.

2

Place the supplied YPAO microphone at ear height in your listening

position.

• When positioning the microphone, we recommend that you use equipment that allows you

to adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the

tripod screws to  x the microphone in place.

• Measuring, for multiple listening positions, is also available. For more information, refer to

“Setting up the speaker parameters automatically (YPAO)” in the Owner’s Manual.

3

Press RECEIVER A on the remote control to switch this unit on.

4

Connect the YPAO microphone to the YPAO MIC jack on the front panel.

YPAO microphone

“Mic On View ON SCREEN”

appears on the front panel

display, and the display at right

appears on the TV screen.

YPAO can be performed

viewing only front panel display

on this unit without the TV

screen.

Opening and closing the front panel door

Before step 4, gently press the bottom of the door to open it.

Keep the door closed when not using controls or jacks behind the

front panel door.

This completes preparation. To achieve more accurate results, take note of the

following when measuring acoustics.

• Keep the room as quiet as possible for a few minutes.

• Wait in a corner of the room, or leave it entirely, while acoustics are measured to

avoid creating an obstruction between the speakers and the YPAO microphone.

5

Set up the speaker parameters automatically (YPAO)

YPAO microphone

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

- 7 -

SCENE

VOLUME

ENHANCER

SUR. DECODE

STRAIGHTSLEEP PURE DIRECT

AV

AUDIO

1234

75

FM

INFO

MEMORY

AM

PRESET

PA RT Y

MOVIE MUSIC

MUTE

ENTER

7856

90

10

1234

REC

ENT

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

HDMI OUT

MULTI

1234

6

V-AUX

USB

NET

TUNER

PHONO

TUNING

ON SCREEN OPTION

1

2

3

4

BD/DVD

TV

CD

RADIO

1

2

3

4

BD/DVD

TV

CD

RADIO

RETURN

DISPLAY

S

C

E

N

E

V

O

L

U

M

E

N

H

A

N

C

E

R

S

U

R

.

D

E

C

O

D

E

S

T

R

A

I

G

H

T

P

U

R

E

D

I

R

E

C

T

M

O

V

I

E

M

U

S

I

C

M

U

T

E

7

8

5

6

9

0

1

0

1

2

3

4

R

E

C

E

N

T

V

T

V

O

L

T

V

C

H

T

O

P

M

E

N

U

P

O

P

-

U

P

M

E

N

U

S

O

U

R

C

E

M

A

I

N

Z

O

N

E

2

R

E

C

E

I

V

E

R

C

O

D

E

S

E

T

S

L

E

P

A

P

R

T

Y

F

M

I

N

F

O

M

E

M

O

R

Y

A

M

P

R

E

S

E

T

A

U

D

I

O

A

V

A

1

2

3

4

7

5

I

N

P

U

T

M

U

T

E

D

O

C

K

H

D

M

I

O

U

T

M

U

L

T

L

I

1

2

3

4

6

V

-

V

A

U

X

U

S

B

N

E

T

U

N

E

R

P

H

O

N

O

T

U

N

I

N

G

O

N

S

C

R

E

N

O

P

T

I

O

N

1

2

3

4

B

D

/

D

V

D

T

V

C

D

R

A

D

I

O

R

E

T

U

R

N

D

I

S

P

L

A

Y

A

RECEIVER A

ENTER, Cursor

5

Use the cursor B/C to select the “Measure” and press ENTER to start

measurement.

When “Multi Position” is set to “Yes” (default), the

measurement of multiple positions will follow. Refer to

“Setting up the speaker parameters automatically (YPAO)”

for details on “Multi Position” in the Owner’s Manual.

The display at right appears if measurement  nishes

without any problems.

Result

Displays the results of automatic acoustics measurement.

For details, refer to “Reviewing the automatic setup

parameters” in the Owner’s Manual.

Save/Exit

Applies the result to the speaker setup and  nishes the

automatic measurement.

Note

If a problem occurs, an error message or report is displayed either during or after acoustic

measurement. Refer to “When an error message is displayed during measurement,” or “When a

warning message is displayed after measurement” in the Owner’s Manual to resolve the problem

and measure acoustics with YPAO again.

6

Use the cursor B/C to select “Save/Exit” and press ENTER.

7

Use the cursor D/E to select “SAVE” and press ENTER.

When the display at right appears, the YPAO setup is

complete.

8

Press ENTER.

YPAO is terminated. Disconnect the YPAO microphone.

All the preparation is completed.

Enjoy the various functions provided by this unit. For details on the operations, refer to the Owner’s

Manual.

SCENE

VOLUME

ENHANCER

SUR. DECODE

STRAIGHTSLEEP PURE DIRECT

AV

AUDIO

1234

75

FM

INFO

MEMORY

AM

PRESET

PARTY

MOVIE MUSIC

MUTE

ENTER

7856

90

10

1234

REC

ENT

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

HDMI OUT

MULTI

1234

6

V-AUX

USB

NET

TUNER

PHONO

TUNING

ON SCREEN OPTION

1

2

3

4

BD/DVD

TV

CD

RADIO

1

2

3

4

BD/DVD

TV

CD

RADIO

RETURN

DISPLAY

- 8 -

A

Switches this unit between on and standby mode

This unit switches between on and standby mode every time you press this key.

B

Selects an input source to listen to

The name of the selected input source appears on the front panel display.

VOLUME

A.Sel: AUTO

AV1

C

Selects a scene

You can switch the settings such as input sources and sound  eld programs with a single key.

Refer to “Default scene settings” on page 5 for details on the settings assigned to this unit.

D

Adjusts the volume level

The current volume level is displayed on the front panel display.

VOLUME

Main Volume

E

Mutes the sound

The MUTE indicator blinks while the sound is muted.

F

Selects sound 

eld programs and sound decoders

Front

panel

Remote

control

Description

MOVIE

Selects sound  eld programs optimized for appreciating music.

MUSIC

Selects sound  eld programs optimized for viewing movies,

dramas, and sports.

SUR. DECODE

Selects surround decoders such as Dolby Pro Logic II.

STRAIGHT

Switches to Straight decoding mode for stereo/multi-channel

playback without using a sound  eld program.

PURE DIRECT

Switches to Pure Direct Mode for faithful reproduction of audio.

G

Turns on Compressed Music Enhancer

Press ENHANCER to turn on Compressed Music Enhancer for playback of the compressed music

source with better sound quality.

VOLU ME

ENHANCER

Enhancer On

To disable Compressed Music Enhancer, press ENHANCER again.

Basic operations

YC597A0/QREN1

Owner’s Manual

AV Receiver English for Asia*, Africa, Oceania

and Latin America

*Except for China and Korea

En 2

BEFORE USE

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• Power cable

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

Language selection

This procedure allows you to select the language of

menus and messages on the TV screen.

1

Press jON SCREEN to display the ON

SCREEN menu.

2

Press kCursor B / C to select “Setup” and

press kENTER.

3

Press kCursor D / E to select the

“Language” and press kENTER.

4

Press kCursor B / C to select the favorite

language from the following options.

5

Press jON SCREEN to close the ON

SCREEN menu.

jON SCREEN

kCursor B / C / D / E

kENTER

ENTER

ON SCREEN

SCEN

E

VO

L

U

ME

MUTE

ENHANCE

R

SU

R. DE

CO

D

E

STRAIGH

T

PURE DIRECT

MOVI

E

MUSI

C

SLEE

P

ARTY

FM

INFO

M

EMORY

AM

PRESE

T

AUDI

O

AV

1

2

3

4

7

5

7

8

5

6

9

0

10

1

2

3

4

R

EC

ENT

T

OP

MENU

P

OP-U

P

MENU

SOU

R

C

E

MAIN

Z

O

NE 2

RE

C

EIVER

CODE SET

INPUT

MU

T

E

D

OCK

HDMI

O

UT

MULTI

1

2

3

4

6

V-AU

X

U

SB

NET

TUNER

P

HON

O

TUNING

O

PTIO

N

1

2

3

4

BD

/

DVD

BD/DVD

TV

CD

RADI

O

RADIO

RETURN

D

ISPLAY

k

j

• Some features are not available in certain regions.

• This manual is created prior to production. Design and

specifications are subject to change in part as a result

of improvements, etc. In case of differences between

the manual and product, the product has priority.

• “

jON SCREEN” (example) indicates the name of

the parts on the remote control. Refer to the “Remote

control” (☞

p. 12) for the information about each

position of the parts.

• J

1 indicates that the reference is in the footnote.

Refer to the corresponding numbers on the bottom of

the page.

• ☞

indicates the page describing the related

information.

• Click on the “ ” at the bottom of the page to

display the corresponding page in “Part names and

functions.”

Front panel

Rear panel

Front panel display

Remote control

English (English), (Japanese),

(French), (German), (Spanish),

(Russian)

En 3

CONTENTS

INTRODUCTION

Features and capabilities...................................................5

Using the TV OSD to operate the unit.............................6

Basic operation of OSD menu..........................................6

Viewing or modifying content

for the current input source <Content window>...............6

Configuring settings for this unit

<ON SCREEN menu>......................................................6

Adjust settings for each input source

<Option menu>.................................................................7

Part names and functions..................................................8

Front panel........................................................................8

Front panel with the cover opened ...................................9

Rear panel.......................................................................10

Front panel display.........................................................11

Remote control ...............................................................12

Remote control (sequel) .................................................13

On-screen display...........................................................14

CONNECTIONS

Connecting speakers........................................................15

Speaker channels and functions......................................15

Speaker layout................................................................16

Connecting speakers and subwoofers.............................19

Advanced speaker configuration....................................22

Speaker layout utilizing an external power amplifier.....22

Connecting an external amplifier ...................................22

Connecting external components....................................23

Jacks and cables..............................................................23

Connecting a TV monitor...............................................24

Connecting BD/DVD players and other devices............27

Connecting game consoles or video camcorders............32

Connecting a multi-format player

or an external decoder ....................................................32

Connecting a SCENE link

playback-compatible device...........................................33

Using the Trigger function to link external component

power..............................................................................33

Connecting audio/video recording devices....................34

Connecting to the network .............................................34

Connecting a USB storage device..................................35

Connecting the FM/AM antennas..................................36

Setting up the speaker parameters automatically

(YPAO)..............................................................................37

PLAYBACK

Basic playback procedure...............................................44

Changing input settings with a single key

(SCENE function)............................................................46

Selecting the SCENE suitable

for the external component.............................................46

Enjoying favorite sound field effect ...............................47

Selecting sound programs and sound decoders..............47

Enjoying spatial sound

with the CINEMA DSP function ...................................47

Enjoying unprocessed playback

(Straight decoding mode)...............................................48

Enjoying Hi-Fi Sound Quality (Pure Direct Mode)....... 49

Enjoying stereo playback...............................................49

Enjoying compressed music source with better sound

quality (Compressed Music Enhancer)..........................49

Sound programs..............................................................50

Controlling this unit while viewing the TV screen .......52

Basic operations via the TV screen display ...................52

Configuring settings specific to an individual input

source (Option menu)......................................................54

Option menu display and setup......................................54

Option menu...................................................................55

Confirming and operating input sources from the

content window................................................................58

Displaying the content window on the TV screen .........58

Switching the display between the Now Playing view

and the Browse view ......................................................58

FM/AM tuning................................................................. 59

Selecting a frequency for reception (Normal tuning) .... 59

Navigating the FM/AM tuner

from the content window ............................................... 61

Playing back tunes on the PC......................................... 63

Windows Media Player setup......................................... 63

Playback of PC music contents...................................... 63

Playing back tunes on the USB storage devices............ 65

Playback of the USB storage device.............................. 65

Listening to the Internet Radio...................................... 67

Listening to Internet Radio ............................................ 67

Using shortcut function................................................... 69

Playing back tunes from your iPod™/iPhone™........... 70

Connecting the Universal Dock for iPod....................... 70

Controlling an iPod™/iPhone™.................................... 70

Playing iPod™/iPhone™ from the menu screen

(Menu browse control)................................................... 71

Operating basic playback functions

via the remote control (Simple remote control)............. 72

Playing iPod™/iPhone™ with wireless connection...... 72

Playing back tunes from Bluetooth™ components ...... 74

Connecting a Yamaha Bluetooth Wireless Audio

Receiver.......................................................................... 74

Pairing Bluetooth™ components................................... 74

Using Bluetooth™ components..................................... 75

Controlling this unit by using the Web browser

(Web Control Center)...................................................... 76

Displaying and Operating Web Control Center............. 76

En 4

SETUP

Configuring input sources (Input menu).......................78

Configuring input sources ..............................................78

Input menu......................................................................79

Editing the SCENE function (Scene menu)...................81

Editing a scene................................................................81

Scene menu.....................................................................82

Simple registering as the SCENE...................................83

Setting sound program parameters

(Sound Program menu)...................................................84

Editing sound programs..................................................84

CINEMA DSP parameters .............................................85

Parameters usable in certain sound programs ................87

Parameters usable in surround decoder..........................88

Setting various functions (Setup menu).........................89

Operating the Setup menu ..............................................89

Setup menu.....................................................................90

Manages settings for speakers........................................90

Setting the audio output function of this unit.................94

Setting this unit’s video output function.........................96

Setting HDMI functions.................................................97

Adjusting this unit’s network parameters.......................99

Setting this unit’s multi-zone function .........................100

Making the receiver easier to use .................................101

Language ......................................................................104

Confirming information of this unit

(Information menu) .......................................................105

Selecting information ...................................................105

Controlling the remote control to operate various

functions..........................................................................107

Keys connecting external components .........................107

Default remote control code settings............................107

Registering remote control codes

for external component operations...............................108

Resetting all remote control codes ...............................109

Extended functionality that can be configured

as needed (Advanced Setup menu)...............................110

Displaying/Setting the Advanced Setup menu.............110

Setting the impedance of speakers...............................110

Remote sensor..............................................................110

Avoiding crossing remote control signals

when using multiple Yamaha receivers........................111

Changing FM/AM frequency steps

(Asia and General models only)...................................111

Changing TV format ....................................................111

Removing HDMI video output up-scaling limits......... 112

Recovery and backup of the system settings................112

Initializing various settings for this unit.......................112

Firmware update...........................................................113

Firmware version.......................................................... 113

Using the HDMI Control function ...............................114

Enjoying the contents in another room .......................118

Connecting Zone2........................................................118

Controlling Zone2........................................................120

Enjoying the music in all rooms...................................120

APPENDIX

Troubleshooting .............................................................121

General.........................................................................121

HDMI™ .......................................................................123

Tuner (FM/AM) ........................................................... 124

USB and Network ........................................................125

iPod™/iPhone™ ..........................................................126

Bluetooth™..................................................................127

Remote control.............................................................127

Glossary..........................................................................128

Audio information........................................................128

Sound program information.........................................129

Video information ........................................................130

Compatibility of the input

and output video signals...............................................130

Information on HDMI™............................................... 131

About trademarks ......................................................... 132

Specifications.................................................................. 133

Index............................................................................... 135

En 5

INTRODUCTION

■ Built-in high-quality, high-power 7-channel amplifier

■ Multi-channel speaker configuration capability

– 2- to 7.1-channel speaker configurations.................................................................................................16

– Presence speaker connections for playback with a richer sound field effect...........................................19

– Bi-amplification connections for high-quality playback .........................................................................20

– External amplifier connections for high-quality playback and expansion of channels ...........................22

– Speaker impedance configuration............................................................................................................20

■ HDMI compatibility

– 8 HDMI input jacks (7 on the rear, 1 on the front) supporting 3D video signal input ............................27

– 2 selectable HDMI output jacks supporting Audio Return Channel and 3D video signal......................25

■ Automatic setup for speaker acoustic parameters

(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................37

■ Extensive inputs (max. 13) for external playback components

– BD/DVD/CD player connection..............................................................................................................27

– Game console / video camcorder connection ..........................................................................................32

– Multi-format player / external decoder connection .................................................................................32

– iPod/iPhone wired connection.................................................................................................................70

– iPod/iPhone wireless connection.............................................................................................................72

– Bluetooth component connection ............................................................................................................74

■ 1-button input/sound program/setting switching (SCENE function)...................46

■ Built-in sound programs and surround decoders for playback variety of sources

– Spatial sound playback with sound field effects (CINEMA DSP)..........................................................47

– Playback with no sound field effects (straight decoding)........................................................................48

– High-fidelity sound playback (Pure Direct).............................................................................................49

– Enhanced sound playback for compressed sources (Compressed Music Enhancer)...............................49

■ Tuner playback

– FM/AM broadcast....................................................................................................................................59

– (Asia and General models only) Changing FM/AM frequency steps......................................................59

■ Playback and control via network

– Playback of music on the PC and DLNA server......................................................................................63

– Internet radio service playback................................................................................................................67

– Control this unit via network (Web Browser Control).............................................................................76

■ Playback of music on the USB storage devices................................................... 65

■ Sophisticated on-screen display (OSD) for easy operation

– Selection of input sources, scenes, and sound programs.........................................................................52

– Navigation for the current input source (content window)......................................................................58

– Setup for this unit (ON SCREEN menu).................................................................................................78

– Setup for each input source (Option menu).............................................................................................54

■ Customizable remote control

– Remote control code setup for operation of external components ........................................................107

■ Multi-room listening capability (Zone2)............................................................... 118

Features and capabilities

Most of functions can be operated with on-screen display on the TV screen. Refer to “Using the TV

OSD to operate the unit” on the following pages for information on functions that can be controlled

using the on-screen display.

INTRODUCTION

En 6

This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and

Option menus, as well as the content window that displays the content of current input sources.

Basic operation of OSD menu

■ Select an input source, scene and sound program

– Select an input source..............................................................................................................................52

– Select a scene...........................................................................................................................................52

– Select a sound program............................................................................................................................53

■ Select a language

– Change the language displayed on the TV screen <Language>............................................................104

Viewing or modifying content for the current input source

■ Operate the FM/AM tuner

– Display preset stations for selection ........................................................................................................61

– Display information on the station currently received.............................................................................61

– Perform operations such as searching for and registering stations using the screen buttons ..................61

■ Operate the Internet radio

– Display information on the station currently received.............................................................................67

– Play back the radio contents ....................................................................................................................67

– Bookmark Internet radio stations.............................................................................................................67

■ Operate the iPod music sources

– Display the list of iPod music sources for selection ................................................................................71

– Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............71

Configuring settings for this unit <ON SCREEN menu>

■ Configure an input source

– Change the input source name <Rename/Icon Select> ...........................................................................79

– Specify a format for digital audio signals <Decoder Mode> ..................................................................80

– Enhance the sound of compressed audio <Enhancer> ............................................................................80

– Output a video signal input from another input source

while playing a multi-channel audio signal <Video Out>.......................................................................80

– Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................80

– Play the music sources on PC with the external control <DMC Control>..............................................80

■ Customize a scene

– Register or clear settings for a selected scene <Save>, <Load>, <Reset> ........................................82, 83

– Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically

when a scene is selected <SCENE IR> ...................................................................................................82

– Changing a scene name and icon <Rename/Icon Select> .......................................................................83

■ Adjust a sound program (sound program)

– Adjust sound program parameters...........................................................................................................84

■ Display settings information for this unit

– Display audio signal information <Audio Signal>................................................................................105

– Display video signal information <Video Signal> ................................................................................105

– Display HDMI signal information <HDMI Monitor>...........................................................................105

– Display network information <Network>..............................................................................................106

– Display system information <System>..................................................................................................106

– Display Zone information <Zone>........................................................................................................106

Using the TV OSD to operate the unit

Continues to the

INTRODUCTION

Using the TV OSD to operate the unit

En 7

■ Adjust acoustic parameters to match your speakers and listening environment

– Specify speaker acoustic parameters automatically

(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................37

– Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................91

– Specify settings for each speaker <Configuration>.................................................................................91

– Control volume control for each speaker <Level> ..................................................................................93

– Apply speaker distance settings <Distance> ...........................................................................................93

– Control equalizer sound quality <Parametric EQ>..................................................................................93

– Adjust test tone speaker <Test Tone> ......................................................................................................94

■ Adjust audio signals output from this unit

– Correct lag between audio and video signals <Lipsync> ........................................................................94

– Select a dynamic range adjustment method <Dynamic Range> .............................................................95

– Specify the maximum volume <Max Volume>.......................................................................................95

– Specify the initial volume <Initial Volume>............................................................................................95

– Restrict the video signals during the Pure Direct Mode <Pure Direct Mode>........................................95

– Adjust DSP effect and volume level <Adaptive DSP Level>..................................................................95

■ Adjust video signals output from this unit

– Convert analog video signal to another type of signal <Analog to Analog Conversion> .......................96

– Specify the resolution and aspect ratio of output video signals <Processing>........................................96

■ HDMI settings

– Assign the audio input source for the TV <TV Audio Input>.................................................................98

– Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>..............................97

– Transmit HDMI audio/video to the TV during standby mode <Standby Through>...............................98

– Change the output destination of HDMI input audio signals <Audio Output>.......................................98

■ Network settings

– Set the IP address of this unit <IP Address> ...........................................................................................99

– Accept the commands via LAN network when this unit is in the standby mode

<Network Standby>.................................................................................................................................99

– Set the mac address filter for this unit <MAC Address Filter> ...............................................................99

■ Enable listening in multiple rooms (multi-zone function)

– Adjust Zone2 volume <Zone2 Set>.......................................................................................................100

– Display the Zone2 menu on the TV <Monitor Out Assign>.................................................................100

– Rename each zone or scene <Zone2 Scene Rename/Zone Rename> ...................................................101

■ Specify other functions for this unit

– Enter standby mode automatically when no operations are performed <Auto Power Down> .............102

– Assign the other input to the selected input source <Input Assignment> .............................................102

– Adjust the brightness of the front panel display <Dimmer> .................................................................103

– Change the wall paper displayed on the TV screen <Wall Paper>........................................................103

– Specify the function of the TRIGGER OUT jack for controlling external components

<Trigger Output1/Trigger Output2>......................................................................................................103

– Prohibit changes to settings <Memory Guard>.....................................................................................104

Adjust settings for each input source <Option menu>

– Adjust bass and treble levels <Tone Control>.........................................................................................56

– Enable low-volume background music <Adaptive DRC> ......................................................................56

– Enjoying more spatial sound fields <CINEMA DSP 3D Mode>............................................................56

– Adjust the vertical position of dialogues <Dialogue Lift>......................................................................56

– Select the 5.1-channel signal playback method <Extended Surround> ..................................................56

– Adjust the volume of input sources <Volume Trim>...............................................................................57

– Selecting audio input jacks <Audio Select>............................................................................................57

– Shuffle or repeat the song <Shuffle/Repeat>...........................................................................................57

– Connect / Disconnect Bluetooth component to this unit <Connect/Disconnect> ...................................57

– Pairing Bluetooth component with this unit <Pairing>...........................................................................57

INTRODUCTION

En 8

Front panel

a MAIN ZONE A (Power)

Switches this unit between on and standby mode.

b HDMI Through/iPod Charge indicator

Lights up in any of the following cases while the unit is in standby

mode.

• When the Standby Through function is enabled and audio/video

from an external component connected with HDMI is output to a TV

during standby mode (☞

p. 98).

• When an iPod/iPhone, which is placed in the Universal Dock for

iPod, is charging while the unit is in standby mode (☞

p. 80).

This indicator also lights up when the Yamaha Wireless System for

iPod is connected to this unit (☞

p. 72).

c Front panel display

Displays information on this unit (☞

p. 11).

d PURE DIRECT

Switches this unit to Pure Direct Mode (☞

p. 49).

e INPUT selector

Selects an input source from which to playback. Rotate this selector to

cycle through the input sources in order.

f VOLUME

Adjusts the volume level.

Part names and functions

■ Opening and closing the front panel door

To use controls or jacks behind the front panel door, gently press

the bottom of the door to open it. Keep the door closed when not

using controls or jacks behind the front panel door.

Continues to the

e f

c db

En 9

INTRODUCTION

Part names and functions

Front panel with the cover opened

g ON SCREEN

Turns on and off the ON SCREEN menu.

h OPTION

Turns on and off the Option menu (☞

p. 54).

i TONE/BALANCE

Adjusts high-frequency/low-frequency output of speakers/headphones

in each zone (☞

p. 45, p. 120).

Adjusts the balance of the volume of the left and right channels in

Zone2 (☞

p. 120).

j STRAIGHT

Changes a sound program to straight decoding mode (☞

p. 48).

k PROGRAM l / h

Selects a sound program (☞

p. 47). Press the left or right key

repeatedly to cycle through sound programs.

l SCENE

Switches the input source, the sound program, and the HDMI OUT

with a single button (☞

p. 46, p. 81). When this unit is in standby

mode, press this key to switch on.

m MULTI ZONE

ZONE2

Switches to enable/disable the audio and video output to Zone2

(☞

p. 100, p. 118).

ZONE CONTROLS

Switches to Zone2 operation mode. This unit, or its remote control,

can be used to select input sources or adjust volume for an external

amplifier in another room or the built-in amplifier for speakers in

another room (☞

p. 120).

n INFO

Changes the information displayed on the front panel display

(☞

p. 11).

o MEMORY

Registers FM/AM stations as preset stations (☞

p. 60). J1

p FM/AM

Sets the FM/AM tuner band to FM or AM (☞

p. 59). J1

q PRESET j / i

Selects an FM/AM preset station (☞

p. 60). J1

r Cursor B / C / D / E, ENTER, RETURN

s USB port

For connecting a USB memory device or USB portable audio player

(☞

p. 35).

t DISPLAY

Switches the display between the Now Playing view and the Browse view.

u YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker

balance automatically (☞

p. 37).

v PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

w VIDEO AUX jacks

For connecting game consoles to this unit temporarily (☞

p. 32).

x TUNING/CH jj / ii

Changes FM/AM tuner frequencies (☞

p. 59). J1

Cursor B / C / D / E Select menu items and change settings when

menus, etc., are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when menus are

displayed, or close the menu.

n

r

xt w

k

mg li onjh p

vus

q

J

1 : Usable when you have selected TUNER input.

En 10

INTRODUCTION

Part names and functions

Rear panel

a PHONO jacks

For connecting a turntable (☞

p. 31).

b DOCK jack

For connecting an optional Universal Dock for iPod (such as YDS-

12), Wireless System for iPod (YID-W10), or Bluetooth Wireless

Audio Receiver (YBA-10) (☞

p. 70, p. 72, p. 74).

c NETWORK port

For connecting to the network (☞

p. 34).

d HDMI OUT 1-2 jacks

For connecting an HDMI - compatible TV to output audio/video

signals (☞

p. 25).

e MON.OUT/ZONE OUT jacks (S-VIDEO/VIDEO jacks)

For connecting a TV capable of receiving video input, and outputting

video signals to it (☞

p. 25, p. 26).

f COMPONENT VIDEO jacks

For connecting external components equipped component video-

compatible outputs to receive video signals (☞

p. 28).

g HDMI input jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals (☞

p. 27).

h MONITOR OUT/ZONE OUT jacks (COMPONENT VIDEO

jacks)

For connecting TV that are compatible with component video signals,

using three cables to output video signal (☞

p. 25).

i REMOTE IN/OUT jacks

For connecting an external component that supports the remote

control function (☞

p. 33).

j TRIGGER OUT 1-2 jack

For connecting an external component that supports the trigger

function to operate it linked with operation of this unit (☞

p. 33).

k RS-232C terminal

This is a control expansion terminal for custom installation. Consult

your dealer for details.

l VOLTAGE SELECTOR

(General model only)

Select the switch position according to your local voltage (Refer to

Quick Reference Guide).

m AV1-4 jacks

For connecting to external components equipped with audio/video

outputs to receive audio/video signals (☞

p. 28).

n ANTENNA jacks

For connecting AM and FM antennas (☞

p. 36).

o AV OUT jacks

For outputting audio/video signals received when analog inputs are

selected (☞

p. 34).

p AUDIO1-4 jacks

For connecting external components equipped with audio outputs to

receive audio signals (☞

p. 31).

q MULTI CH INPUT jacks

For connecting a player that supports a multi-channel output

(☞

p. 32).

r ZONE OUT jacks

Outputs sound of this unit to an external amplifier set in a different

room. (☞

p. 118).

s PRE OUT terminals

For connecting a subwoofer with built-in amplifier or an external

power amplifier (☞

p. 21, p. 22).

t SPEAKERS terminals

For connecting the front, center, surround and surround back speakers

(☞

p. 19). Connect the presence speakers (☞p. 19) or the speakers for

Zone2 (☞

p. 18) to the EXTRA SP jacks.

u AC IN

For connecting the supplied power cable.

HDMI OUT

12

ZONE OUT PRE OUT

ZONE 2

AV OU T

YP

B

P

R

SURROUND

SUR. BACK

CENTER

SUBWOOFER

1

2

MON.OUT/ZONE OUT

ARC ARC

SELECTABLE

FRONT

(SINGLE)

SU

RR

OU

ND

SU

RR

OU

ND BA

C

K

/

S

PEAKER

S

C

ENTE

R

AV 1

AV 2

AV

3

AV 4

HDMI

AV

5

AV

6

AV 7

S

IN

G

L

E

FR

O

BI

-

AMP

4

AV

3

A

V 4

T

ICAL

O

PTICA

L

AU

DI

O

1

(

2 TV

)

(3 CD)

A

U

DI

O

2 A

U

DI

O

3

AU

DI

O

4

FRON

T

SURROUND

SUR. BAC

K

S

UBWOOFE

R

C

ENTER

M

U

LTI

C

H INP

UT

CO

MP

O

NENT VIDE

O

C

OAXIA

L

Y

P

B

P

R

Y

P

B

P

R

C

D

(

1 BD/DVD

)

AV 1

A

V 2

B

A

Ԝ

ԝ

IN

OUT

R

EM

O

TE

Distinguishing the input and output jacks

The area around the audio/video output jacks is marked

in white to prevent connection errors. Use these jacks to

output audio/video signals to a TV or other external

component.

Output jacks

AC IN

SURROUND SURROUND BACK/

SPEAKERS

CENTER

AV 1

HDMI OUT

AV 2 AV 3 AV 4

HDMI

AV 5 AV 6 AV 7

SINGLE

FRONT

BI-AMP

12

PHONO

GND

(1 BD/DVD)

AV 1

DOCK NETWORK

AV 2 AV 3 AV 4

AV 3

AV 4

COAXIAL COAXIAL

OPTICAL OPTICAL

OPTICAL

AUDIO 1

(2 TV)

(3 CD)

AUDIO 2 AUDIO 3 AUDIO 4

FRONT

SURROUND

SUR. BACK

SUBWOOFER

CENTER

MULTI CH INPUT

COMPONENT VIDEO

COAXIAL

MONITOR OUT/ZONE OUT

ZONE OUT PRE OUT

ZONE 2

AV OUT

YP

B

P

R

YP

B

P

R

YP

B

P

R

C

D

SURROUND

SUR. BACK

CENTER

SUBWOOFER

1

2

RS-232C

2

1

TRIGGER

OUT

+12V 0.1A MAX.

MON.OUT/ZONE OUT

ARC ARC

SELECTABLE

FRONT

(1 BD/DVD)

AV 1

AV 2

B

A

ԘԙԚԛ Ԝԝ

(SINGLE)

ZONE2/

F.PRESENCE

EXTRA SP

ANTENNA

75

GND

AM

(4 RADIO)

IN

OUT

REMOTE

bad g kjf

tm onu

c

e h i

p q r s

l

En 11

INTRODUCTION

Part names and functions

Front panel display

a Tuner indicator

Light up according to the status of a received station (☞

p. 59).

b ZONE2 indicator

Lights up when the audio and video output to Zone2 is enabled

(☞

p. 120).

c SLEEP indicator

Blinks when the sleep timer is on (☞

p. 12, p. 120).

d PARTY indicator

Lights up when the party mode is active (☞

p. 100).

e Multi information display

Displays a range of information on menu items and settings.

f VOLUME indicator

Displays the current volume level.

g HDMI indicator

Lights up during normal HDMI communication.

IN indicator

Lights up when this unit detects the external component connected to

the HDMI input jack (☞

p. 27).

OUT 1/OUT 2 indicators

Indicate which HDMI OUT jack outputs audio/video signals

(☞

p. 25).

h ENHANCER indicator

Lights up when the Compressed Music Enhancer is active (☞

p. 49).

i CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

j CINEMA DSP 3D indicator

Lights up when CINEMA DSP 3D is activated (☞

p. 48).

k Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

l MUTE indicator

Blinks when audio is muted.

m Speaker indicators

Indicate speaker terminals from which signals are output.

n ADAPTIVE DRC indicator

Lights up when the adaptive dynamic range control feature is tuned on

(☞

p. 56).

Surround speaker L

Subwoofer 1

Surround speaker R

Center speaker

Surround back

speaker L

Surround back

speaker R

Surround back

speaker J1

Presence speaker L Presence speaker

R

Front speaker L Front speaker R

Subwoofer 2

■ Switching information on the front panel display

The front panel can display sound programs and surround

decoder names as well as the active input source.

Press fINFO repeatedly to cycle through displayed

informations. J2

VOLUME

AV1



Standard

Input source name

Sound program (DSP program)

STEREO

TUNED

PARTY

ENHANCER

SLEEP

MUTE

VOLUME

ADAPTIVE

DRC

a be fc

ihj mknlgk

d

J

1 : “SB” is displayed when using a 6.1-channel configuration only.

J

2 : During FM/AM reception, the frequency is displayed instead of the input source.

En 12

INTRODUCTION

Part names and functions

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b MAIN/ZONE2

Switches the zone to be operated by the remote control between the

Main zone and Zone2 (☞

p. 120).

c SOURCE A (SOURCE Power)

Switches an external component on and off.

d Input selector

Select an input source on this unit from which to playback.

e Radio control keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

f INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound program, the

surround decoder, the FM/AM tuner frequency, etc.).

g SLEEP

Switches this unit to standby mode automatically after a specified

period of time has elapsed (sleep timer). Press this key repeatedly to

set the time for the sleep timer function.

The SLEEP indicator lights up when the sleep timer is on.

h PARTY

Switches the party mode on and off (☞

p. 120).

i SCENE

Switch the input source and the sound program with a single button

(☞

p. 46). When this unit is in standby mode, press this key to switch on.

j ON SCREEN

Turns on and off the ON SCREEN menu.

SCENE

VOLUME

ENHANCER

SUR. DECODE

STRAIGHTSLEEP PURE DIRECT

AV

AUDIO

1234

75

FM

INFO

MEMORY

AM

PRESET

PARTY

MOVIE MUSIC

MUTE

ENTER

7856

90

10

1234

REC

ENT

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

HDMI OUT

MULTI

1234

6

V-AUX

USB

NET

TUNER

PHONO

TUNING

ON SCREEN OPTION

1

2

3

4

BD/DVD

TV

CD

RADIO

1

2

3

4

BD/DVD

TV

CD

RADIO

RETURN

DISPLAY

a

c

b

e

i

j

f

g

h

d

AV1-7 AV1-7 jacks

V-AUX Front panel VIDEO AUX jacks

AUDIO1-4 AUDIO1-4 jacks

USB A USB storage device connected to the USB port.

NET Internet radio, a USB connected to the USB port,

or a PC connected to the NETWORK port.

MULTI MULTI CH INPUT jacks

DOCK A Universal Dock for iPod, Wireless System for

iPod, or Bluetooth Wireless Audio Receiver

connected to the DOCK jack.

TUNER FM/AM tuner

PHONO PHONO jacks

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset stations when the FM/AM.

TUNING H / I Changes tuning frequencies.

120min. 90min.

60min.30min.Off

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert four AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the remote control can

only be operated within a narrow range.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than 2 minutes, or leaving exhausted batteries in the remote

control, may clear the remote control codes. If this should occur,

replace the batteries with new ones, and set the remote control

codes.

a

c

b

Battery compartment

cover

Battery compartment

Continues to the

Страница загружается ...

Yamaha RX-V1067 Инструкция по применению

Yamaha RX-V1067 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов