ASROCK Asrock H110 Информация о товаре

Version 1.0

Published June 2017

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock Tel

: +886-2-28965588 ext.123 (Standard International call charges apply)

1

English

H110 Pro BTC+

Motherboard Layout

ATXPWR1

Intel

H110

CMOS

Battery

LAN

AUD IO

COD EC

1

HD_ AUD IO 1

COM 1

1

USB_ 5_6

1

HDLE D RESE T

PLED PWRBTN

PANEL 1

1

CLRM OS2

1

PCIE2_1

RoHS

H110 Pro BTC+

ATX1 2V1

Top:

RJ-4 5

USB 2.0

T: USB 3

B: USB4

USB 2 .0

T: US B1

B: USB2

Top:

LIN E IN

Cen te r:

FRO NT

Bot to m:

MIC IN

CPU _FAN1

CHA _FA N1

PCI E_ PW R1

Front USB 3.0

TPMS 1

1

Super

I/O

DDR4_B 1 (64 bit, 288 -pin mo d ule)

DDR4_A 1 (64 bit, 288 -pin mo d ule)

PCI Express 3.0

BIOS

ROM

PCIE1

PCIE3_1

PCIE4_1

PCIE3

PCIE5_1

PCIE4

PCIE6_1

PCIE5

PCIE7_1

PCIE6

PCIE1_1

PCIE2

PCI E_ PW R2

SATA3 _2

SATA3 _3

SATA3 _0

SATA3 _1

CHA _FAN2

1

LPT1

USB 3_3 _4

1

SPK_ CI1

PS2

Keybo ard

PS2

Mouse

DVI1

USB 3 .0

T: US B1

B: USB2

M2_1

SATA_ POW 1

2

English

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 CPU Fan Connector (CPU_FAN1)

3 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

4 ATX Power Connector (ATXPWR1)

5 Chassis Fan Connector (CHA_FAN1)

6 TPM Header (TPMS1)

7 SATA3 Connector (SATA3_1)

8 SATA3 Connector (SATA3_0)

9 SATA3 Connector (SATA3_3)

10 SATA3 Connector (SATA3_2)

11 Chassis Intrusion and Speaker Header (SPK_CI1)

12 Clear CMOS Jumper (CLRMOS2)

13 System Panel Header (PANEL1)

14 USB 2.0 Header (USB_5_6)

15 USB 3.0 Header (USB3_3_4)

16 Print Port Header (LPT1)

17 COM Port Header (COM1)

18 SATA Power Connector (SATA_POW1)

19 PCIe Power Connector (PCIE_PWR2)

20 Front Panel Audio Header (HD_AUDIO1)

21 PCIe Power Connector (PCIE_PWR1)

22 Chassis Fan Connector (CHA_FAN2)

3

English

H110 Pro BTC+

1 2

3

4

5810 9 7

6

I/O Panel

No. Description No. Description

1 PS/2 Mouse Port 6 USB 2.0 Port (USB_34)

2 LAN RJ-45 Port* 7 USB 3.0 Ports (USB3_1_2)

3 Line In (Light Blue)** 8 USB 2.0 Port (USB_12)

4 Front Speaker (Lime)** 9 DVI-D Port

5 Microphone (Pink)** 10 PS/2 Keyboard Port

* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

4

English

** To congure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multi-

channel audio feature through the audio driver.

Please set Speaker Conguration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Conguration:

Port Function

Light Blue (Rear panel) Rear Speaker Out

Lime (Rear panel) Front Speaker Out

Pink (Rear panel) Central /Subwoofer Speaker Out

Lime (Front panel) Side Speaker Out

5

English

H110 Pro BTC+

Chapter 1 Introduction

ank you for purchasing ASRock H110 Pro BTC+ motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

1.1 Package Contents

•

ASRock H110 Pro BTC+ Motherboard (ATX Form Factor)

•

ASRock H110 Pro BTC+ Quick Installation Guide

•

ASRock H110 Pro BTC+ Support CD

•

1 x I/O Panel Shield

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

1 x Screw for M.2 Socket (Optional

Because the motherboard specications and the BIOS soware might be updated, the

content of this documentation will be subject to change without notice. In case any

modications of this documentation occur, the updated version will be available on

ASRock’s website without further notice. If you require technical support related to

this motherboard, please visit our website for specic information about the model

you are using. You may nd the latest VGA cards and CPU support list on ASRock’s

website as well. ASRock website http://www.asrock.com.

6

English

1.2 Specications

Platform

•

ATX Form Factor

•

Solid Capacitor design

CPU

•

Supports 7

th

and 6

th

Generation Intel® Core

TM

i7/i5/i3/

Pentium®/Celeron® Processors (Socket 1151)

•

Supports CPU up to 91W

•

Digi Power design

•

8 Power Phase design

•

Supports Intel® Turbo Boost 2.0 Technology

Chipset

•

Intel® H110

Memory

•

Dual Channel DDR4 Memory Technology

•

2 x DDR4 DIMM Slots

•

Supports DDR4 2400/2133 non-ECC, un-buered memory*

* 7

th

Gen Intel® CPU supports DDR4 up to 2400; 6th Gen Intel®

CPU supports DDR4 up to 2133.

•

Supports ECC UDIMM memory modules (operate in non-

ECC mode)

•

Max. capacity of system memory: 32GB

•

Supports Intel® Extreme Memory Prole (XMP) 2.0

•

15μ Gold Contact in DIMM Slots

Expansion

Slot

•

1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)*

* Supports NVMe SSD as boot disk

•

12 x PCI Express 2.0 x1 Slots

Graphics

•

Intel® HD Graphics Built-in Visuals and the VGA outputs

can be supported only with processors which are GPU

integrated.

•

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTru

TM

3D, Intel® Clear Video HD

Technology, Intel® Insider

TM

, Intel® HD Graphics

•

Gen9 LP, DX11.3, DX12

•

HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For

7

th

Gen Intel® CPU)

7

English

H110 Pro BTC+

•

HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/

Decode: VP9, HEVC 10b (For 6

th

Gen Intel® CPU)

•

Max. shared memory 1024MB

* e size of maximum shared memory may vary from dierent

operating systems.

•

Supports DVI-D with max. resolution up to 1920x1200 @

60Hz

•

Supports Accelerated Media Codecs: HEVC, VP8, VP9

•

Supports HDCP with DVI-D Port

•

Supports Full HD 1080p Blu-ray (BD) playback with DVI-D

Port

Audio

•

7.1 CH HD Audio (Realtek ALC887 Audio Codec)

* To congure 7.1 CH HD Audio, it is required to use an HD

front panel audio module and enable the multi-channel audio

feature through the audio driver.

•

Supports Surge Protection

•

ELNA Audio Caps

LAN

•

Gigabit LAN 10/100/1000 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN (Supported on Black PCIe Slots

only)

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

Rear Panel

I/O

•

1 x PS/2 Mouse Port

•

1 x PS/2 Keyboard Port

•

1 x DVI-D Port

•

4 x USB 2.0 Ports (Supports ESD Protection)

•

2 x USB 3.0 Ports (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

•

HD Audio Jacks: Line in / Front Speaker / Microphone

8

English

Storage

•

4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and

Hot Plug*

* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 will

be disabled.

•

1 x M.2 Socket, supports M Key type 2230/2242/2260/2280

M.2 SATA3 6.0 Gb/s module

Connector

•

1 x Print Port Header

•

1 x COM Port Header

•

1 x TPM Header

•

1 x Chassis Intrusion and Speaker Header

•

1 x CPU Fan Connector (4-pin)

* e CPU Fan Connector supports the CPU fan of maximum

1A (12W) fan power.

•

2 x Chassis Fan Connectors (4-pin)

•

1 x 24 pin ATX Power Connector

•

1 x 8 pin 12V Power Connector

•

2 x PCIe Power Connectors

•

1 x SATA Power Connector

•

1 x Front Panel Audio Connector

•

1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports

ESD Protection)

•

1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports

ESD Protection)

BIOS

Feature

•

AMI UEFI Legal BIOS with multilingual GUI support

•

ACPI 5.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

CPU, DRAM, PCH 1.05V Voltage multi-adjustment

Hardware

Monitor

•

CPU/Chassis temperature sensing

•

CPU/Chassis Fan Tachometer

•

CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by

CPU temperature)

•

CPU/Chassis Fan multi-speed control

•

CASE OPEN detection

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

9

English

H110 Pro BTC+

OS

•

Microso® Windows® 10 64-bit (For 7

th

Gen Intel® CPU)

•

Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-

bit (For 6

th

Gen Intel® CPU)

* To install Windows® 7 OS, a modied installation disk with

xHCI drivers packed into the ISO le is required. Please refer to

page 142 or more detailed instructions.

* For the updated Windows® 10 driver, please visit ASRock’s

website for details: http://www.asrock.com

Certica-

tions

•

FCC, CE

* For detailed product information, please visit our website:

http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

third-party overclocking tools. Overclocking may aect your system’s stability, or

even cause damage to the components and devices of your system. It should be done

at your own risk and expense. We are not responsible for possible damage caused by

overclocking.

10

English

is is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard

components. Failure to do so may cause physical injuries and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

11

English

H110 Pro BTC+

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on

the socket, if the CPU surface is unclean, or if there are any bent pins in the socket.

Do not force to insert the CPU into the socket if above situation is found. Otherwise,

the CPU will be seriously damaged.

2. Unplug all power cables before installing the CPU.

1

2

A

B

12

English

4

5

3

13

English

H110 Pro BTC+

Please save and replace the cover if the processor is removed. e cover must be placed

if you wish to return the motherboard for aer service.

14

English

2.2 Installing the CPU Fan and Heatsink

1 2

CPU_

FAN

15

English

H110 Pro BTC+

2.3 Installing Memory Modules (DIMM)

is motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

e DIMM only ts in one correct orientation. It will cause permanent damage to

the motherboard and the DIMM if you force the DIMM into the slot at incorrect

orientation.

1. For dual channel conguration, you always need to install identical (the same

brand, speed, size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Memory Technology with only one memory

module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4

slot; otherwise, this motherboard and DIMM may be damaged.

16

English

1

2

3

17

English

H110 Pro BTC+

2.4 Expansion Slots (PCI Express Slots)

ere are 13 PCI Express slots on the motherboard.

PCIe slots:

PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE1_1/PCIE1/PCIE2_1/PCIE3_1/PCIE3/PCIE4_1/PCIE4/PCIE5_1/PCIE5/

PCIE6_1/PCIE6/PCIE7_1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width

graphics cards.

Before installing an expansion card, please make sure that the power supply is

switched o or the power cord is unplugged. Please read the documentation of the

expansion card and make necessary hardware settings for the card before you start

the installation.

1. Please connect the SATA power connector and PCIe power connectors to the power

supply when three graphics cards are installed on this motherboard.

2. 12V power supply can only provide 1.2A current in the white PCIe slots.

18

English

2.5 Jumpers Setup

e illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper

is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”

when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRMOS2)

(see p.1, No. 12)

CLRMOS2 allows you to clear the data in CMOS. To clear and reset the system

parameters to default setup, please turn o the computer and unplug the power

cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to

short pin2 and pin3 on CLRMOS2 for 5 seconds. However, please do not clear the

CMOS right aer you update the BIOS. If you need to clear the CMOS when you

just nish updating the BIOS, you must boot up the system rst, and then shut it

down before you do the clear-CMOS action. Please be noted that the password,

date, time, and user default prole will be cleared only if the CMOS battery is

removed.

Clear CMOSDefault

Страница загружается...

ASROCK Asrock H110, H110 Pro BTC+ Информация о товаре

Похожие модели бренда

Модели других брендов