Yamaha S80 Руководство пользователя

STANDBY/ON

NATURAL SOUND DVD PLAYER DVD-S80

DVD-S80

Before connecting, operating or

adjusting this product, please read

these instructions completely.

Please keep this manual for future

reference.

DVD/VIDEO CD/CD PLAYER

OWNER’S MANUAL

RQT6573

Getting started

Dear customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully.

(Inside of product)

RQLS0233

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

DANGER

(FDA 21 CFR)

(IEC60825-1)

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO BEAM.

CAUTION

RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.

EXPOSITION DANGEREUSE AU FAISCEAU.

ATTENTION

SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSÆTTELSE FOR STRÅLING.

ADVARSEL

AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

VARO!

SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL

ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARNING

SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.

UNNGÅ EKSPONERING FOR STRÅLEN.

ADVARSEL

SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG

GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

VORSICHT

FCC INFORMATION (for U.S. customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product,

when installed as indicated in the instructions contained in this manual,

meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or

another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reasonable level

of assurance that your use of this product in a residential environment will

not result in harmful interference with other electronic devices.

This equipment generates /uses radio frequencies and, if not installed

and used according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will

not occur in all installations. If this product is found to be the source of

interference, which can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If

the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena

Park, CA 90620.

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended

to alert the user to the presence of un-

insulated “dangerous voltage” within the

product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of

electric shock to persons.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and main-

tenance (servicing) instructions in the

literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment by

playing it at a safe level. One that lets the sound come through loud and

clear without annoying blaring or distortion—and, most importantly,

without affecting your sensitive hearing. Since hearing damage from

loud sounds is often undetectable until it is too late,

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

The model number and serial number of this product can be found

on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future

reference.

MODEL NUMBER

SERIAL NUMBER

DVD-S80

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO

RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL

BE PLACED ON THE APPARATUS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION:

TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

This Class B digital apparatus complies with Canadian

ICES-003.

RQT6573

Getting started

Table of contents

Getting started

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04

Audio connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04

Video connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06

QUICK SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06

Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07

Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07

Basic operations

Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

Starting play from a selected title or track . . . . . . . . . . . . . . . . . . . . . 08

Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

Fast forward and rewind—SEARCH. . . . . . . . . . . . . . . . . . . . . . . . . 09

Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

Advanced operations

Convenient features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using menus to play MP3 discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Increasing your enjoyment of movies . . . . . . . . . . . . . . . . 12

Soundtracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using On-Screen Menu Icons . . . . . . . . . . . . . . . . . . . . . . . 13

Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Disc information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Changing settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Entering a password (Ratings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Reference

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

PRECAUTIONS

Before using this unit please read these operating instructions carefully.

Take special care to follow the warnings indicated on the unit itself as well

as the safety suggestions listed below.

Afterwards keep them handy for future reference.

Safety

1. Power Source—The unit should be connected to a power supply only

of the type described in the operating instructions or as marked on the

unit. If you are not sure of the type of power supply to your home,

consult your appliance dealer or local power company.

2. Polarization—If the unit is equipped with a polarized AC power plug

(a plug having one blade wider than the other), that plug will fit into the

AC outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

3. Power Cord Protection—AC power supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them. Never take hold of the plug or cord if your hand is wet,

and always grasp the plug body when connecting or disconnecting it.

4. Overloading—Do not overload wall outlets and extension cords as

this can result in a risk of fire or electric shock.

5. Nonuse Periods—When the unit is not being used, turn the power off.

When left unused for a long time, the unit should be unplugged from

the household AC outlet.

6. Attachments—Do not use attachments not recommended by the unit

manufacturer as they may cause hazards.

Installation

Environment

1. Water and Moisture—Do not use this unit near water—for example,

near a bathtub, washbowl, swimming pool, or the like. Damp

basements should also be avoided.

2. Condensation—Moisture may form on the lens in the following

conditions...

≥immediately after a heater has been turned on.

≥in a steamy or very humid room.

≥

when the unit is suddenly moved from a cold environment to a warm one.

If moisture forms inside this unit, it may not operate properly. To

correct this problem, turn on the power and wait about one hour for the

moisture to evaporate.

3. Heat—The unit should be situated away from heat sources such as

radiators and the like. It also should not be placed in temperatures less

than 5 ˚C (41 ˚F) or greater than 35 ˚C (95 ˚F).

Placement

1. Ventilation—The unit should be situated so that its location or position

does not interfere with its proper ventilation. Allow 10 cm (4˝) clearance

from the rear of the unit.

2. Foreign Material—Care should be taken so that objects do not fall

into and liquids are not spilled into the unit. Do not subject this unit to

excessive smoke, dust, mechanical vibration, or shock.

3. Carts and Stands—The unit should be used only

with a cart or stand that is recommended by the

manufacturer. The unit and cart combination should

be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the unit and cart

combination to overturn.

4. Mounting—Any mounting of the appliance should follow the

manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

Maintenance

Disconnect this unit from the AC outlet before cleaning.

Clean the cabinet, panel and controls with a soft cloth lightly moistened

with a mild detergent solution.

Do not use any type of abrasive pad, scouring powder or solvent such as

alcohol or benzine.

Do not place the unit

on amplifiers or equip-

ment that may become

hot.

The heat can damage the unit.

RQT6573

Getting started

Note

The included power cable is for use with this unit only.

Do not use it with other equipment.

Connection

Notes

≥Never plug the power cable to a household AC outlet until all connections are complete.

≥Please refer to the manuals of other equipment as necessary to make the best connections.

Audio connection

∏ Remote control ∏ Audio/Video cable∏ Power cable∏ Batteries (

k2)

for remote control

Accessories

Please check and identify the supplied accessories.

FRONT REAR CENTER

DIGITAL AUDIO IN

DVD/CD

OPTICAL OPTICAL

VIDEO 1

AM ANTFM ANT GND

SYSTEM

CONNECTOR

6CH PREOUT

VCR OUT

MONITOR

OUT

VIDEO 1 IN

VIDEO VIDEO

VCR IN

DVD/CD IN

TO SW–S80

R L

MARK

75Ω UNBAL.

SUBWOOFER

PCM/

DTS

DIGITAL

OPTICAL

DIGITAL

AUDIO OUT

MIXED 2CH

SUBWOOFER

COMPON

VIDEO O

R L

1. OPTICAL jack

Connect this jack to the OPTICAL input jack of your AV amplifier using a

commercially available optical cable.

By connecting to the digital jacks, you can enjoy listening to the multi-

channel sound track of a DVD source with sound field effects.

≥Change the settings in “Digital output” (➡ page 17).

2. MIXED 2 CH jacks

Connect these jacks to the AUDIO L and R input jacks of your AV amplifier

using the supplied Audio/Video cable.

3. SUBWOOFER jack

When using MIXED 2CH output, you can connect this jack to a subwoofer

with built-in amplifier to obtain more powerful bass.

Audio/Video cable (included)

red white

Optical cable

Speakers

Amplifier: e.g. AVR-S80

Insert fully,

with this side

facing up.

RQT6573

Getting started

Connection

Video connection

Connecting the power cable

Plug the power cable into the AC IN when all connections are complete,

and then plug this unit to the household AC outlet.

Caution

Do not use other AC power cables than the one provided. Otherwise it may

result in causing fire or an electrical shock.

AC IN

To the household AC outlet

Power cable (included)

To enjoy 5.1-ch surround sound

≥Change the settings in “Digital output” to suit the equipment you connect

(➡ page 17).

Note

You cannot use DTS Digital Surround decoders not suited to DVD.

This unit equips three types of video jacks as follows:

1. VIDEO jack

This jack transmits conventional composite video signal. Connect this jack

to your AV amplifier so that you can switch the both audio and video inputs

at once.

2. S VIDEO jack

This jack transmits color and luminance separately and achieves high

quality color reproduction. Connect this jack to your television using a

commercially available S-Video cable. If your AV amplifier equipped with S

VIDEO input and output jacks, connect to the AV amplifier so that you can

switch the both audio and video inputs at once.

3. COMPONENT VIDEO OUT jacks

These jacks transmit color difference and luminance separately and

provide the best quality picture. Connect these jacks to the corresponding

jacks of your television. If your AV amplifier equipped with COMPONENT

VIDEO input and output jacks, connect to the AV amplifier so that you can

switch the both audio and video inputs at once.

≥After making this connection, change the black level for a better picture

(➡ page 16, Video—Black Level Control).

Note

Do not connect this unit to a television through a video cassette recorder. If

you do so, the picture may not be played back properly due to the copyright

protection technology incorporated in this unit.

The lead is polarized.

Match the power cable’s

connector to the unit’s inlet.

PCM/

DTS

DIGITAL

OPTICAL

DIGITAL

AUDIO OUT

AUDIO OUT VIDEO OUT

MIXED 2CH

S VIDEO

SUBWOOFER

COMPONENT

VIDEO OUT

VIDEO

FRONT REAR CENTER

DIGITAL AUDIO IN

DVD/CD

OPTICAL OPTICAL

VIDEO 1

AM ANTFM ANT GND

SYSTEM

CONNECTOR

6CH PREOUT

VCR OUT

MONITOR

OUT

VIDEO 1 IN

VIDEO VIDEO

VCR IN

DVD/CD IN

TO SW–S80

R L

MARK

75Ω UNBAL.

SUBWOOFER

Television

Video pin cable

yellow

Audio/Video cable (included)

Amplifier: e.g. AVR-S80

RQT6573

Getting started

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage

items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of

time. Store in a cool, dark place.

∫ Use

Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet)

directly in front of the unit.

∫ Batteries

≥Insert so the poles (i and j) match those in the remote control.

≥Do not use rechargeable type batteries.

1 Press [POWER Í/I] to turn on the unit.

2 Press [SET UP] to show the QUICK SETUP screen.

3 Press [3, 4, 2, 1] to select the menu language

and press [ENTER].

4 Press [3, 4] to select “Yes” to continue and

press [ENTER].

5 Press [3, 4, 2, 1] to select the item and press

[ENTER].

≥Audio Language (For setting details ➡ page 16)

≥Subtitle Language (For setting details ➡ page 16)

≥TV Aspect (For setting details ➡ “TV Aspect” below)

6 Press [ENTER] and then [SET UP] to end the

settings.

To return to the previous screen

Press [RETURN].

∫ TV Aspect

Select “4:3” (regular) or “16:9” (widescreen) to suit your television.

If you have a regular 4:3 television, you can also select how video on some

discs is shown (➡ page 16, Video—TV Aspect).

≥4:3 Pan&Scan (Factory preset)

The pan and scan (the original widescreen images

are converted for viewing on a regular television)

version of the video is automatically selected if

recorded on the disc.

≥4:3 Letterbox

The letterbox (the original widescreen images

appear with black bands above and below) version

of the video is automatically selected if recorded on

the disc.

QUICK SETUP

Remote control only

The QUICK SETUP screen appears when you press [SET UP] the first

time after purchase and assists you to make necessary settings.

You can access this screen again later if you need to (➡ page 16, Others—

QUICK SETUP).

Preparation

Turn on the television and select the appropriate video input on the televi-

sion to suit the connections for the player.

The remote control

RETURN

3·4·5·6

2·6

R6, AA, UM-3

SELECT

SETUP

QUICK SETUP

Select the menu language.

ENTER RETURN

English

Français

Español

RQT6573

Getting started

Page

1 Standby/on switch (POWER Í/I) . . . . . . . . . . . . . . . . . . . . . . . . 06

Press to switch the unit from on to standby mode or vice versa.

In standby mode, the unit is still consuming a small amount of power.

2 Stop button (∫ STOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

3 Skip buttons (:, 9 SKIP). . . . . . . . . . . . . . . . . . . . . . . . . . . 09

4 Top menu button (TOP MENU) . . . . . . . . . . . . . . . . . . . . . . . . 8, 11

5 Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . . . . 6, 8

6 Display button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

7 Program button (PROGRAM). . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8 Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 12

9 Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

: Random play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . . . . . 11

; Position memory button (POSITION MEMORY) . . . . . . . . . . . . . 09

< Setup button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 17

= Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

> Pause button (; PAUSE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

? Open/Close button (OPEN/CLOSE) . . . . . . . . . . . . . . . . . . . . . . . 08

@ Play button (1 PLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

A Slow/Search buttons (6 , 5 SLOW/SEARCH) . . . . . . . . . . . 09

B Menu button (MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 11

C Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06

D Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

E Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

F Numbered buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . . . . 08

G Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

H Remote control signal sensor

I Display

J Standby indicator

When the unit is connected to the household AC outlet, this indicator

lights up in standby mode and goes out when the unit is turned on.

Control reference guide

1 HJ3>3

G ?A 2A

NATURAL SOUND DVD PLAYER DVD-S80

Buttons such as 1 function the same as the controls on the remote control.

Disc information

∫ DVDs that can be played

This unit has a Dolby Digital decoder so you can play

DVDs with this mark.

This unit does not have a DTS decoder. Connect this

unit to equipment that has a DTS decoder to enjoy

DVDs with this mark.

∫ Playing DVDs and Video CDs

The producer of these discs can control how they are played so you may

not always be able to control play as described in these operating instruc-

tions. Read the disc’s instructions carefully.

∫ CD-R and CD-RW discs

This unit can play CD-DA (digital audio) and video CD format audio CD-R and

CD-RW that have been finalized (a process that enables CD-R/CD-RW

players to play audio CD-R and CD-RW) upon completion of recording. It may

not be able to play some CD-R or CD-RW due to the condition of the recording.

∫ DVD-R discs

It may not be possible to play these discs in all cases due to the type of disc

or condition of the recording.

∫ Handling precautions

≥

Do not write on the label side with a ball-point pen or other writing instrument.

≥Do not use record cleaning sprays, benzine, thinner, static electricity

prevention liquids or any other solvent.

≥Do not attach labels or stickers to discs. (Do not use discs with exposed

adhesive from tape or left over peeled-off stickers.)

≥Do not use scratch-proof protectors or covers.

≥Do not use discs printed with label printers available on the market.

Including CD-R/RW and discs recorded with MP3.

Do not use irregularly shaped discs (e.g. heart-shaped), as these can dam-

age the unit.

∫ Region number supported by this player

Region numbers are allocated to DVD players and software according to

where they are sold.

≥The region number of this player is “1”.

≥The player will play DVD-Video marked with labels containing “1” or “ALL”.

Example:

∫ Discs that cannot be played

DVD-Audio, PAL discs, DVD-ROM, DVD-RAM, CD-ROM, CDV, CD-G,

iRW, DVD-RW, CVD, SVCD, SACD, Divx Video Discs and Photo CD.

∫ Discs that can be played

DVD-Video DVD-R

[DVD-V] [VCD]

Indication used in instructions

Video CDAudio CD

[CD]

ALL

Operations in these instructions are described mainly with

the remote control, but you can do the operations on the main

unit if the controls are the same.

RQT6573

Basic operations

[DVD-V] [CD] [VCD]

Preparation

Turn on the television and select the appropriate video input on the televi-

sion to suit the connections for the player.

1 Press [POWER Í/I] to turn on the unit.

2 Press [OPEN/CLOSE] to open the disc tray.

3 Place the disc on the disc tray.

4 Press [1] (PLAY).

The disc tray closes and play begins.

[CD] (MP3 discs)

Group and track names are displayed on the television.

Press [SUBTITLE] to turn the display on or off.

To stop play

Press [∫] (➡ page 9, Resume function).

To pause play

Press [;] during play.

Press [1] (PLAY) to restart play.

∫ Auto standby

The unit switches to standby mode after about 30 minutes in the stop mode.

Notes

≥If “/” appears on the television

The operation is prohibited by the unit or disc.

≥The disc continues to rotate while the menu is displayed even after you

finish playing an item. Press [∫] when you finish to preserve the unit’s

motor and your television screen.

≥Volume may be lower when playing DVDs than when playing other discs

or during television broadcasts.

If you turn the volume up on the television or amplifier, be sure to reduce

the volume again before playing other sources so that a sudden increase

in output does not occur.

When a menu screen appears on the television

[DVD-V] [VCD]

Remote control only

Press the numbered buttons to select an item.

To select a 2-digit number

Example: To select item 23, press [S10] ➡ [2] ➡ [3].

≥When playing DVDs, you can also use [3, 4, 2, 1] to select items.

Press [ENTER] to confirm your selection.

Play of the selected item now begins.

Other buttons used to operate menus

Read the disc’s instructions for further details about operation.

[9]: Shows the next menu.

[:]: Shows the previous menu.

[RETURN]: Shows the menu screen. [VCD]

[TOP MENU]: Shows the first menu screen. [DVD-V]

[MENU]: Shows the menu screen. [DVD-V]

Starting play from a selected title or track

[DVD-V] [CD] [VCD]

Remote control only

Press the numbered buttons to select the item.

To select a 2-digit number

Example: To select track 23, press [S10] ➡ [2] ➡ [3].

[CD] (MP3 discs)

Press [ENTER] after pressing the numbered buttons.

(You do not have to press [S10].)

Play starts from the selected item.

Note

This works only when stopped with some discs.

Basic play

RETURN

;

3, 4, 2, 1

ENTER

POSITION

MEMORY

TOP MENU

SUBTITLE

∫

:, 9

6, 5

∫

;

NATURAL SOUND DVD PLAYER DVD-S80

Label must face upward.

(With double-sided discs, load so

the label for the side you want to

play is facing up.)

Numbered

buttons

RQT6573

Basic operations

Skipping chapters or tracks

[DVD-V] [CD] [VCD]

During play or while paused

Press [:] or [9].

≥Each press increases the number of skips.

Fast forward and rewind—SEARCH

[DVD-V] [CD] [VCD]

During play

Press [6] or [5].

≥Audio will be heard during search. You can turn this audio off if you want

to (➡ page 16, Audio—Audio during Search).

Slow-motion play

[DVD-V] [VCD]

While paused

Press [6] or [5].

Frame-by-frame viewing

[DVD-V] [VCD]

Remote control only

While paused

Press [2] or [1].

The frame changes each time you press the button.

≥The frames change in succession if you press and hold the button.

≥Pressing [;] also activates forward frame-by-frame.

Resume function

[DVD-V] [CD] [VCD]

(When the elapsed play time is displayed)

The position you stopped play at is recorded by the unit when “!” is flash-

ing on the display.

While “!” is flashing, press [1] (PLAY) to start play from where you

stopped it. (When playing DVD ➡ Chapter Preview below)

≥The position is cleared when the disc tray is opened or the unit is

switched to standby.

≥Press [∫] to clear the position.

Position Memory function

Remote control only

This function allows you to memorize a position to start from even after

switching the unit to standby or changing discs.

1. During play, press [POSITION

MEMORY].

2. Press [POWER Í/I] to switch the unit

to standby, or press [OPEN/CLOSE] to

remove the disc.

3. When you are ready to play the disc again, press [1] (PLAY). Play

starts from the memorized position and the position is cleared.

(When playing DVD ➡ Chapter Preview below)

To clear the position before play

Press [∫] before recalling the memorized position.

≥You can memorize positions on up to five different discs at a time. When

you memorize another position, the earliest position is replaced.

Chapter Preview [DVD-V]

The following message appears immediately after you press [1] (PLAY).

Press [1] (PLAY) while the message is displayed and the beginning por-

tions of each chapter up to the current one are played. Full play resumes

from the point where you pressed [∫] or [POSITION MEMORY].

(This feature works only within a title.)

If you do not press [1] (PLAY), the message disappears and play starts

from where you pressed [∫] or [POSITION MEMORY].

TRACK

CHAP

D.N.R. D.MIX

GROUP

AUDIO

DVD

VIDEO

PGM

RND

A-B

WMA

MP3

TITLE

INEMA

-ENH

ASS

-SRD

Position memorized

Press PLAY to Preview Chapters

When playing Video CDs with playback control

Pressing buttons to perform skip, search or slow-motion may take

you to a menu screen.

Notes

≥The speed of search and slow-motion increases up to 5 steps.

≥Press [1] (PLAY) to restart play.

≥You cannot move backwards with Video CD during slow-motion

and frame-by-frame.

RQT6573

Advanced operations

Convenient features

[DVD-V] [CD] [VCD]

(When the elapsed play time is displayed)

Repeat play

Remote control only

During play

Press [REPEAT].

Each time you press the button:

[DVD-V]

Chapter (C)>Title (T)

>OFF

^----------------------------------------}

[CD] [VCD]

Track (T)>Entire disc (A)>OFF

^--------------------------------------------}

[CD] (MP3 discs)

Track (T)>Group (G)

>OFF

^--------------------------------------}

“All (A)” during program and random play.

If the Video CD has playback control

1. Press [∫] during play until “PBC PLAY” is cleared from the display.

2. Press the numbered buttons to select a track to start play (➡ page 8).

3. Press [REPEAT] (➡ above).

Note

You cannot use repeat play to repeat an entire DVD or an entire MP3 disc.

∫ To repeat only your favorite tracks

Start program play (see right) and press [REPEAT] to display “A”.

Program play

Remote control only

You can select up to 32 tracks/chapters to play in the order you choose.

While stopped

1 Press [PROGRAM].

e.g. CD

[DVD-Video,\MP3\discs\only]

Press the numbered buttons to select a title

(DVD-Video) or group (MP3 discs).

≥Some items cannot be selected.

≥Different titles have different soundtracks and subtitles.

3 Press the numbered buttons to select a track (CD

or VCD) or chapter (DVD-Video) (and, for MP3

discs press [ENTER]).

≥Repeat steps 2 and 3 to program other items.

≥To select an item using the cursor buttons

Press [ENTER] and [3 , 4] to select an item, then press [ENTER]

again to register the number.

All the items on a disc, a title or a group are selected when you

select “ALL”.

≥Times are not displayed when programming DVD-Video and MP3.

4 Press [1] (PLAY).

Play now begins in the programmed sequence.

≥Some items cannot be played even if you program them. [DVD-V]

To add or change items

Press [3, 4] to select an available item, then repeat steps 2 and 3.

To move to the page before or after the one shown

Press [6] or [5].

To clear the programmed items one by one

Press [3, 4] to select the item number (No) and press [CANCEL]. (Alter-

natively, you can select “Clear” with [3, 4, 2, 1] and press [ENTER].)

To clear the whole program

Move to “Clear all” with [3, 4, 2, 1] and press [ENTER]. The whole

program is also cleared when the unit is turned off or the disc tray is

opened.

To exit the program mode

Press [PROGRAM] while stopped. (The program is retained in memory.)

PROGRAM

Choose a track, then press ENTER.

No Time

Track

Total Time

Press PLAY to start

Play

Clear

Clear all

0:00

SELECT

ENTER RETURN

Track No. Program No.

TRACK

CHAP

D.N.R. D.MIX

GROUP

AUDIO

DVD

VIDEO

PGM

RND

A-B

WMA

MP3

TITLE

INEMA

-ENH

ASS

-SRD

RETURN

3, 4, 2, 1

ENTER

TOP MENU

RANDOM

REPEAT

PROGRAM

CANCEL

∫

6, 5

e.g. DVD-Video

C T

OFF

GROUP

AUDIO

DVD

VIDEO

PGM

RND

A-B

WMA

MP3

Numbered

buttons

RQT6573

Advanced operations

Random play

[DVD-V] [CD] [VCD]

Remote control only

While stopped

1 Press [RANDOM].

2 Press the numbered buttons to select a title

(DVD-Video only) and press [1] (PLAY).

≥Some titles cannot be selected. [DVD-V]

Play now begins in random order.

To exit the random mode

Press [RANDOM] while stopped.

Using menus to play MP3 discs

[CD] (MP3 discs)

Remote control only

This unit can play MP3 files recorded on CD-R/RW with a computer.

Files are treated as tracks and folders are treated as groups.

1 Press [TOP MENU] or [MENU].

A file list appears.

2 Press [3, 4] to select the track and press

[ENTER].

Play starts and continues to the last track in the last group.

“0” indicates the track currently playing.

To show other pages

Press [3, 4, 2, 1] to select “Prev” or “Next” and press [ENTER].

After listing all the tracks in one group, the list for the next group appears.

To close the file list screen

Press [TOP MENU] or [MENU].

Using the tree screen to find a group

1 Press [1] while a track is highlighted to display

the tree screen.

You cannot select groups that contain no compatible files.

2 Press [3, 4] to select a group and press

[ENTER].

The file list for the group appears.

For your reference

Press [2, 1] to jump layers in the tree screen.

To return to the file list screen

Press [RETURN].

Notes

≥Discs must conform to ISO9660 level 1 or 2 (except for extended

formats). MP3 files must have the extension “.MP3” or “.mp3”.

≥This unit is compatible with multi-session but if there are a lot of sessions

it takes more time for play to start. Keep the number of sessions to a

minimum to avoid this.

≥This unit is not compatible with ID3 tags.

≥This unit is not compatible with files with a sampling rate of 32 kHz.

Naming folders and files

At the time of recording, prefix folder and

file names with 3-digit numbers in the order

you want to play them (this may not work at

times).

SELECT

File list

ENTER RETURN

G 8

T 14

Total 123

Tree

G 8/16

MP3 music

001 My Favorite

001 Brazilian pops

002 Chinese pops

003 Czech pops

004 Hungarian pops

005 Liner notes

006 Japanese pops

007 Mexican pops

008 Philippine pops

009 Swedish pops

001 Momoko

002 Standard number

001 Piano solo

002 Vocal

Example:

002

001

root

001.mp3

002.mp3

003.mp3

003

001.mp3

002.mp3

003.mp3

001.mp3

002.mp3

003.mp3

004.mp3

Group name

SELECT

File list

ENTER RETURN

Total

001 Both Ends Freezing

002 Lady Starfish

003 Life on Jupiter

004 Metal Glue

005 Paint It Yellow

006 Pyjamamama

007 Shrimps from Mars

008 Starperson

009 Velvet Cuppermine

010 Ziggy Starfish

NextPrev

No Group: 001 My Favorite Tree

Random Playback

Press PLAY to start

GROUP

AUDIO

DVD

VIDEO

PGM

RND

A-BA-B

WMA

MP3

RQT6573

Advanced operations

Increasing your enjoyment of movies

[DVD-V]

Remote control only

Some DVDs have multiple soundtracks, subtitle languages and camera

angles, and you can change these during play.

≥“–” or “––” is displayed instead of the language number in circumstances

such as when no languages is recorded on the disc.

Soundtracks

During play

Press [AUDIO].

The number changes each time you press the button.

Subtitles

During play

Press [SUBTITLE].

The number changes each time you press the button.

≥In some cases, the subtitle language is not changed to the selected one

immediately.

≥If the subtitles overlap closed captions recorded on discs, turn the

subtitles off.

To clear/display the subtitles

1. Press [SUBTITLE].

2. Press [1].

3. Press [3, 4] to select “OFF” or “ON”.

Angles

During play

Press [ANGLE].

The number changes each time you press the button.

≥You can also use this button to turn the vocals on and off on karaoke

discs. Read the disc’s instruction for details.

≥Refer to [B] on page 15 for audio signal type details.

3/2.1 ch

Digital

1 English

I love you

Je t’aime

English

French

“D.MIX” indicates that a multi-channel soundtrack can be

down-mixed to two channels.

TRACK

CHAP

D.N.R. D.MIX

GROUP

AUDIO

DVD

VIDEO

PGM

RND

A-B

WMA

MP3

TITLE

INEMA

-ENH

ASS

-SRD

ANGLE

AUDIO

3, 4, 1

SUBTITLE

RQT6573

Advanced operations

Using On-Screen Menu Icons

RETURN

3, 4, 2, 1

ENTER

ON SCREEN

CANCEL

Numbered

buttons

On-Screen Menu Icons are menus that contain information about the disc

or unit. These menus allow you to perform operations by changing this

information.

Common procedures

[DVD-V] [CD] [VCD]

Remote control only

1 Press [ON SCREEN].

Each time you press the button:

Disc information

Original display(-=Unit information (➡ step 2)

[Unit\information\only]

While the leftmost icon is highlighted

Press [3, 4] to select the menu.

Each time you press the button:

Play menu(------)Video menu

e e

u u

Display menu()Audio menu

3 Press [2, 1] to select the item.

4 Press [3, 4] to select the setting.

≥Items with “3” or “4” above and below can be changed by [3, 4].

≥Press [ENTER] if the setting does not change after pressing

[3, 4].

≥Some items require different operations. Read the following expla-

nations.

For your reference

≥Depending on the condition of the unit (playing, stopped, etc.) and the

type of software you are playing, there are some items that you cannot

select or change.

≥When numbers are displayed (e.g. title No.), the numbered buttons are

also effective for setting. After entering numbers, press [ENTER] to reg-

ister the setting.

To clear the icons

Press [RETURN] until the menus disappear.

∫ To change the position of the icons

1. Press [2, 1] to select the rightmost icon.

2. Press [3, 4] to move the icons.

(There are 5 positions.)

RQT6573

Advanced operations

Using On-Screen Menu Icons

Play menu

a A-B repeat [DVD-V] [CD] [VCD]

You can repeat a section between points A and B within a title or track.

[ENTER] (start point) ➡ [ENTER] (finish point)

To cancel: [ENTER]

≥Some subtitles recorded around point A or B may fail to appear.

[DVD-V]

≥The unit automatically determines the end of a title/track as point B

when the end of the title/track is reached.

b Repeat play (➡ page 10)

[DVD-V] [CD] (MP3 discs)

Chapter (C)(>Title (T)

Track (T)(>Group (G)

^>OFF(J ^>OFF(J

[CD] [VCD]

Track (T)(>Entire disc (A)

^>OFF(J

“All (A)” during program and random play.

c Play mode display [DVD-V] [CD] [VCD]

---: Normal play PGM: Program play RND: Random play

d Marker [DVD-V] [CD] [VCD]

You can mark up to 5 positions to play again.

[ENTER] (The unit is now ready to accept markers.)

To mark a position: [ENTER] (at the desired point)

To mark another position: [2, 1] ➡ [ENTER]

To recall a marker: [2, 1] ➡ [ENTER]

To erase a marker: [2, 1] ➡ [CANCEL]

Video menu

Cinema image [DVD-V] [VCD]

You can change the picture quality for movie viewing.

[#Nor.: Normal mode (Factory preset)

;

l#Cin.1: Mellows images and enhances detail in dark scenes

;

l#Cin.2: Sharpens images and enhances detail in dark scenes

;

{#User: User mode

The following items are also displayed when you select “User”.

a Contrast (j7 to i7)

b Brightness (0 to i15)

c Color (j7 to i7)

Unit informationDisc information

e.g. DVD-Video

e.g. MP3 disc

e.g. Video CD

a T: Title number [DVD-V]

T: Track number [CD] [VCD]

G: Group number [CD] (MP3 discs)

b C: Chapter number [DVD-V]

T: Track number in group [CD] (MP3 discs)

c Time [DVD-V]

≥Press [3, 4] to show the elapsed play time or remaining time for the

title (or chapter during program and random play).

≥Select a position to start play by specifying a time with the numbered

buttons and press [ENTER].

Changing the time display [CD] [VCD]

Press [3, 4] to show the elapsed play time, remaining time for the

track, or remaining time for the disc.

Elapsed play time [CD] (MP3 discs)

(display only, cannot be changed)

d Soundtrack language [DVD-V] (➡ page 12)

(See [A] on page 15 for language abbreviations.)

e Audio signal type [DVD-V]

(See [B] on page 15 for details.)

Karaoke vocal on/off (Karaoke DVD only) [DVD-V]

Solo: OFF or ON

Duet: OFF, V1iV2, V1 or V2

f Subtitle language [DVD-V] (➡ page 12)

(See [A] on page 15 for language abbreviations.)

Subtitles on/off [DVD-V]

ON()OFF

Group/Track name display on/off [CD] (MP3 discs)

ON()OFF

g Angle number [DVD-V] (➡ page 12)

h Track number in disc [CD] (MP3 discs)

i Total number of tracks on disc [CD] (MP3 discs)

j Audio mode [VCD]

LR () L () R

^-------------------------J

k Playback control [VCD]

Indicates whether playback control is on or off.

RQT6573

Advanced operations

Display menu

a 4:3 TV ZOOM [DVD-V]

ON()OFF

Expand a letterbox picture (➡ page 6) to fill more of a regular 4:3

aspect television (The sides of the picture are cut off when you select

ON).

≥4:3 TV ZOOM is cleared when you open the disc tray or switch the

unit to standby.

≥Depending on the video format of the disc and current play status,

this feature may not work as described.

≥Menus may act or appear differently while 4:3 TV ZOOM is on.

b IPB display [DVD-V] (➡ page 19, Glossary)

ON()OFF

Displays the picture type (I/P/B) in the still picture mode.

c Display dimmer [DVD-V] [CD] [VCD]

Changes the brightness of the unit’s display.

Bright()Dim()Auto

([DVD-V] [VCD])

^------------------------------J

The display is dimmed during play, but brightens when you perform

operations such as slow-motion, search, and pause.

[A] Audio/Subtitle language

ENG: English SVE: Swedish CHI: Chinese

FRA: French NOR: Norwegian KOR: Korean

DEU: German DAN: Danish MAL: Malay

ITA: Italian POR: Portuguese VIE: Vietnamese

ESP: Spanish RUS: Russian THA: Thai

NLD: Dutch JPN: Japanese ¢: Others

[B] Signal type/data

LPCM/ÎDigital/DTS/MPEG: Signal type

k (kHz): Sampling frequency

b (bit): Number of bits

ch (channel): Number of channels

Example:

3/2 .1ch

.1: Subwoofer signal (not displayed if there is

no subwoofer signal)

0: No surround

1: Mono surround

2: Stereo surround (left/right)

1: Center

2: Front leftiFront right

3: Front leftiFront rightiCenter

Audio menu

a ADVANCED SURROUND [DVD-V] (Dolby Digital, 2-channel or over

only)

Use ADVANCED SURROUND Virtual Surround Sound to enjoy a

surround-like effect if you are using 2 front speakers.

If you are playing a disc with surround effects recorded on it, the effect

is broadened and sound seems to come from virtual speakers on

either side.

[#1: Natural effect

;

l#2: Emphasized effect

;

{#OFF: Cancel (Factory preset)

Optimum seating position

≥Turn ADVANCED SURROUND off when using Dolby Pro Logic.

Dolby Pro Logic will not work correctly if it is on.

≥ADVANCED SURROUND will not work, or will have less effect with

some discs.

≥Turn off the surround sound effects on the equipment you have

connected when using this effect.

≥Turn ADVANCED SURROUND off if it causes distortion.

b BASS EXTENSION [DVD-V] [CD] [VCD]

Turn BASS EXTENSION on when you have connected an active

subwoofer to the SUBWOOFER terminal on the rear of the unit

(➡ page 4).

[#OFF (Factory preset)

;

l#1: Natural bass effect

;

{#2: Emphasized bass effect

≥Turn BASS EXTENSION off when using Dolby Pro Logic. Dolby Pro

Logic will not work correctly if it is on.

c CINEMA DIALOGUE [DVD-V] (Dolby Digital, 3-channel or over,

where the dialogue is recorded in the center channel)

This mode makes the dialogue in movies easier to hear.

ON()OFF (Factory preset)

≥CINEMA DIALOGUE will not work, or will have less effect with some

discs.

Speaker Speaker

Seating position

<When using the

television’s speakers>

Distance Al

Television’s width

3 to 4 times distance A

RQT6573

Advanced operations

This chart shows the settings for this unit. Change the settings to suit your preferences and to suit the unit to the environment in which it is being

used. These settings are retained in memory until they are changed, even if the unit is turned off. See page 17 for details on menu operation.

Changing settings

Options (Underlined items are the factory preset.)

English French Spanish

Original

§1

Other ¢¢¢¢

§2

Automatic

§3

English French

Spanish Other ¢¢¢¢

§2

English French Spanish

Other ¢¢¢¢

§2

Setting ratings (When level 8 is selected)

8 No Limit 1 to 7

§4

0 Lock All

Changing ratings (When level 0–7 is selected)

Unlock Player Change Password

Change Level Temporary Unlock

4:3 Pan&Scan 4:3 Letterbox 16:9

Automatic Field Frame

Lighter: when connected to a TV through the VIDEO

OUT or S VIDEO OUT terminal.

Darker: when connected to a TV through the

COMPONENT VIDEO OUT (Y/PB/PR) terminals.

No Yes

Bitstream PCM

Off Bitstream

Off On

On Off

English Français Español

On Off

Off On

Yes No

Items

Audio [DVD-V]

Choose the preferred audio language.

Subtitle [DVD-V]

Choose the preferred subtitle language.

Menus [DVD-V]

Choose the preferred language for disc menus.

Ratings [DVD-V]

Set a ratings level to limit DVD-Video play.

≥The password screen is shown if you choose levels 0 to 7 or if you

choose “Ratings” when levels 0 to 7 have been selected (➡ page 17).

≥Select “Level 0” to prevent play of discs that do not have ratings levels

recorded on them.

TV Aspect (➡ page 6)

Choose the setting to suit your television and preference.

Still Mode (➡ page 19, Glossary)

Specify the type of picture shown when paused.

Black Level Control

Change the black level of the picture if you connected a television

through the COMPONENT VIDEO OUT terminals.

PCM Down Conversion [DVD-V] (➡ page 17)

Dolby Digital [DVD-V] (➡ page 17)

DTS Digital Surround [DVD-V] (➡ page 17)

D. Range Compression [DVD-V] Dolby Digital only

(➡ page 19, Glossary)

Change the dynamic range for late night viewing.

Audio during Search

Choose whether to have sound during search.

Menu Language

Choose the preferred language for these menus and the on-screen

messages.

On-Screen Messages

Choose whether to show on-screen messages or not.

Demo

A demonstration of the unit’s on-screen displays starts when you select

“On”. The demonstration stops when you press a button and the setting

reverts to “Off”.

QUICK SETUP (➡ page 6)

Answer questions to make basic settings.

Menus

Disc

Video

Audio

Display

Others

§1

The original language of each disc will be selected.

§2

Input a code number with the numbered buttons (see below).

§3

If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc.

§4

Prohibits play of DVD-Video with corresponding ratings recorded on them.

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Ameharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6588

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali

;

Bangla

: 6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Language code list

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish:7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto:8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance

:8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian

: 8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

RQT6573

Advanced operations

Common procedures

Remote control only

See page 16 for menu and option details.

1 Press [SET UP] to show the menus.

≥The QUICK SETUP screen appears when you press [SET UP] the

first time after purchase (➡ page 6).

2 Press [2, 1] to select the menu’s tab.

The screen changes to display the menu.

Disc Video Audio

(---) (---)

;;

Others Display

(------------------------------------------------------)

3 Press [3, 4] to select the item you want to

change and press [ENTER].

4 Press [3, 4, 2, 1] to select the option and press

[ENTER].

The screen now shows the menu again.

To return to the previous screen

Press [RETURN].

When you are finished

Press [SET UP].

Entering a password (Ratings)

[DVD-V]

The password screen is shown when you select levels 0 to 7.

1. Input a 4-digit password with the numbered buttons and press

[ENTER].

≥If you enter a wrong number, press [CANCEL] to erase it before you

press [ENTER].

≥The lock symbol appears closed to show the rating is locked.

≥Do not forget your password.

2. Press [ENTER] to confirm the 4 digits.

Digital output

[DVD-V]

Change the settings when you have connected equipment through this

unit’s DIGITAL AUDIO OUT terminal (OPTICAL).

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz.

Select “Yes” if the equipment you connect cannot process signals with a

sampling frequency of 96 kHz.

≥Select “No” if you use analogue connection, irrespective of the type of

equipment.

No (Factory preset):

Output as 96 kHz. There is no output if the disc has copy protection. Select

“Yes” in this case.

Yes:

Converted to 48 kHz for output.

Dolby Digital and DTS Digital Surround

Bitstream: (Factory preset for Dolby Digital and DTS Digital Surround)

Select if the equipment you connected can decode the signal.

PCM:

Select if the equipment you connected cannot decode the signal.

Off:

Select if the equipment you connected cannot decode the signal.

IMPORTANT

If the equipment you connected cannot decode the signal, the

setting must be changed to PCM or Off. If not, signals the equipment

cannot process will be output by this unit, causing high levels of

noise which can damage your hearing and the speakers.

RETURN

3, 4, 2, 1

ENTER

SET UP

CANCEL

Numbered

buttons

Disc

SELECT

Audio

Subtitle

Menus

Ratings

English

Automatic

Level 8

SETUP

TAB

Now, when you insert a DVD-Video that exceeds the ratings limit

you set, a message appears on the television.

Follow the on-screen instructions.

RQT6573

Reference

Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve

the problem, consult your dealer for instructions.

Power Page

Troubleshooting guide

Picture

≥Some distortion is normal during SEARCH.

≥Ensure that the equipment is connected properly.

≥Make sure the television is on.

≥Ensure the television’s video input setting (e.g., VIDEO 1) is correct.

≥Go to the Video menu in the SETUP screen, and change “TV Aspect” to suit your television. You

may also need to change the screen mode on the television itself.

≥Ensure that the unit is connected directly to the television, and is not connected through a video

cassette recorder.

≥The 4:3 TV ZOOM function is on.

≥Check the settings in the On-Screen Menu Icons’ Video menu.

–

6, 16

–

Picture distorted.

No picture.

The picture shown on the

television is not normal.

(The sides of the picture are cut

off or black bands appear at the

top and bottom of the screen.)

Picture quality is poor.

≥Some operations may be prohibited by the disc.

≥The unit may not be operating properly due to lightning, static electricity or some other external

factor.

Reset procedure:

Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON.

Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC

power cable, and then reconnect it.

≥Check the batteries are installed correctly.

≥The batteries are depleted: Replace them with new ones.

≥Point the remote control at the remote control signal sensor and operate.

≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.

≥This unit cannot play discs other than DVD-Video, CD and Video CD.

≥This unit cannot play DVD-Video with a region number other than “1”, “ALL” or multiple region

numbers including “1”.

≥The disc may be dirty and may require cleaning.

≥Ensure that the disc is installed with the label of the side to be played facing upwards.

≥An alternative language is not selected with discs which do not contain more than one language.

≥In the case of some discs, the alternative language cannot be selected with [AUDIO] or

[SUBTITLE]. Try selecting it from the disc’s menu if one is available.

≥Menus are only displayed if they are recorded on the disc.

≥Subtitles appear only with discs that contain them.

≥Subtitles are cleared from the television. Display the subtitles.

≥The language is not recorded on the disc.

≥This function is dependent on software availability. Even if a disc has a number of angles

recorded, these angles may be recorded for specific scenes only.

≥This feature does not work when the unit is outputting bitstream signals.

≥Reset all the settings to Factory Preset.

While stopped, press and hold [:] and [;] on the unit and then also press and hold [<]

on the unit until “Initialized” disappears from the television. Turn the unit off and on again.

All settings will return to the default values.

Operation

–

No power.

The unit is automatically

switched to the standby mode.

≥Insert the AC power cable securely into the household AC outlet.

≥To conserve power, the unit automatically switches to standby after approximately 30 minutes in

the stop mode. Turn the power back to ON.

–

No response when buttons

pressed.

No operations can be performed

with the remote control.

Play fails to start even when

[1] (PLAY) is pressed.

Play starts but then stops

immediately.

Alternative languages fail to be

selected.

No menus.

No subtitles.

Soundtrack and/or subtitle

language is not the one selected

with the SETUP menus.

Angle cannot be changed.

CINEMA DIALOGUE has no effect.

You have forgotten your ratings

password.

Sound

4, 5

–

No sound.

Distorted sound.

Piercing noise comes from the

speakers.

≥Check the connections.

≥Check the volume on the equipment you have connected.

≥Ensure that the input settings for the television and stereo system are correct.

≥Turn ADVANCED SURROUND off if it causes distortion.

≥If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,

ensure you have selected the correct settings for “Dolby Digital” and “DTS Digital Surround” in

the SETUP menu’s Audio menu.

RQT6573

Reference

≥Go to Display in the SETUP menus, and select “On” for “On-Screen Messages”.

≥Press [3, 4] while the rightmost icon is highlighted to move them.

≥Go to Disc in the SETUP menus, and select the preferred language for “Menus”.

No on-screen display.

On-Screen Menu Icons not

displayed or only partially

displayed on the television.

The disc’s menu is displayed in

a different language.

Unit displays Page

≥You inserted a disc the unit cannot play; insert one it can.

≥Disc is dirty. Wipe the disc clean.

≥Trouble is likely to have occurred. The number following “H” depends on the status of the unit.

Reset procedure:

Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON. Alternatively,

press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC power cable,

and then reconnect it.

≥If the service numbers fail to clear, note the service number and contact a qualified service person.

≥You haven’t inserted a disc; insert one.

≥You haven’t inserted the disc correctly; insert it correctly.

–

“NO PLAY”

“CHECK DISC”

“H∑∑”

∑∑ stands for a number.

“NO DISC”

Television displays

Glossary

Frame still and field still

Frames are the still pictures that go together to make a moving picture.

There are about 30 frames shown each second.

One frame is made up of two fields. A regular television shows these fields

one after the other to create frames.

A still is shown when you pause a moving picture. A frame still is made up

of two alternating fields, so the picture may appear blurred, but overall

quality is high. A field still is not blurred, but it has only half the information

of a frame still so picture quality is lower.

I/P/B

MPEG 2, the video compression standard adopted for use with

DVD-Video, codes frames using these 3 picture types.

I: Intra coded picture (I-picture)

This is the standard picture and is a complete picture in itself. This

means it has the best picture quality and is the best to use when

adjusting the picture.

P: Predictive coded picture (P-picture)

This picture is calculated based on past I or P-pictures.

B: Bidirectionally-predictive coded picture (B-picture)

This picture is calculated by comparing past and future I and P-pictures

so it has the lowest volume of information.

Linear PCM (pulse code modulation)

These are uncompressed digital signals, similar to those found on CDs.

Playback control (PBC)

If a Video CD has playback control, you can select scenes and information

with menus (called menu play in these instructions).

Bitstream

This is the digital form of multiple channel audio data (e.g., 5.1 channel)

before it is decoded into its various channels.

Decoder

A decoder restores the coded audio signals on DVDs to normal. This is

called decoding.

Dolby Digital

This is a method of coding digital signals developed by Dolby Laboratories.

Apart from stereo (2-channel) audio, these signals can also be 5.1-channel

audio. A large amount of audio information can be recorded on one disc

using this method.

Dolby Pro Logic

A surround system where a 4-channel audio track is recorded as 2 chan-

nels and then is restored to 4 channels for play. The surround channel is

monaural and can reproduce up to 7 kHz.

DTS (Digital Theater Systems)

This surround system is used in many movie theaters around the world.

There is good separation between the channels, so realistic sound effects

are possible.

Dynamic range

Dynamic range is the difference between the lowest level of sound that can

be heard above the noise of the equipment and the highest level of sound

before distortion occurs.

Maintenance

To clean this unit, wipe with a soft, damp cloth.

≥Never use alcohol, paint thinner or benzine to clean this unit.

≥Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Signal system: NTSC

Operating temperature range: i5 to i35 oC (i41 to i95 oF)

Operating humidity range: 5 to 90 % RH (no condensation)

Discs played [8 cm (3˝) or 12 cm (5˝)]:

(1) DVD-Video, DVD-R (DVD-Video compatible)

(2) CD-Audio (CD-DA)

(3) Video CD

(4) CD-R/CD-RW (CD-DA, Video CD formatted discs)

(5) MP3

≥Maximum number of tracks and groups recognizable: 999 tracks

and 99 groups

≥Compatible compression rate: between 32 kbps and 320 kbps

Video output:

Output level: 1 Vp-p (75 ≠)

Output terminal: Pin jack (1 system)

S video output:

Y output level: 1 Vp-p (75 ≠)

C output level: 0.286 Vp-p (75 ≠)

Output terminal: S terminal (1 system)

Component video output:

Y output level: 1 Vp-p (75 ≠)

B output level: 0.7 Vp-p (75 ≠)

R output level: 0.7 Vp-p (75 ≠)

Output terminal: Pin jack (1 system)

(Y: green, P

B: blue, PR: red)

Audio output:

Output level: 2 Vrms (1 kHz, 0 dB)

Output terminal: Pin jack

Number of terminal:

2ch: 1 system

Subwoofer output (0.1ch): 1 system

Audio performance:

(1) Frequency response:

≥DVD (linear audio): 2 Hz–22 kHz (48 kHz sampling)

2 Hz–44 kHz (96 kHz sampling)

≥CD audio: 2 Hz–20 kHz

(2) S/N ratio:

≥CD audio: 115 dB

(3) Dynamic range:

≥DVD (linear audio): 102 dB

≥CD audio: 98 dB

(4) Total harmonic distortion:

≥CD audio: 0.0025 %

Digital audio output:

Optical digital output: Optical terminal

Pickup: Wave length: 658 nm/790 nm

Laser power: CLASS IIa/CLASS I

Power supply: AC 120 V, 60 Hz

Power consumption: 14 W

Dimensions:

435 (W)k247.5 (D)k74.5 (H) mm

[17

⁄16˝ (W)k9

⁄4˝ (D)k2

⁄16˝ (H)]

(excluding protrusions)

Weight: 2.6 kg (5.72 Ib)

Specifications

Note

Specifications are subject to change without notice.

Weight and dimensions are approximate.

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

RQT6573-P Printed in China

Power consumption in standby mode: approx. 3 W

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of

Dolby Laboratories.

“DTS”, “DTS Digital Surround” and “DTS Digital Out” are registered

trademarks of Digital Theater Systems, Inc.

Yamaha S80, DVD-S80 Руководство пользователя

Похожие модели бренда