Samsung LE19R86BD Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя

Это руководство также подходит для

BN68-01169Q-00
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Связывайтесь с SAMSUNG по всему миру
Если у вас есть предложения или вопросы по продуктам Samsung,
связывайтесь с информационным центром Samsung.
Руководство пользователя
Перед началом эксплуатации устройства
внимательно прочитайте настоящее руководство и
сохраните его для будущего использования.
ЭКРАННЫЕ МЕНЮ
ДИСПЛЕЙ ПК
КАРТИНКА В КАРТИНКЕ (PIP)
ТЕЛЕТЕКСТ
Зарегистрируйте устройство по адресу: www.samsung.com/global/register
Запишите здесь название модели и серийный номер для будущих справок.
• Модель _______________ Серийный номер _______________
ТЕЛЕВИЗОР С
ЖИДКОКРИСТАЛ
ЛИЧЕСКИМ
ЭКРАНОМ
LE19R86BD
LE19R86WD
Country
Customer Care Centre
Web Site
ESTONIA 800-7267 www.samsung.ee
LATVIA 800-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz
KYRGYZSTAN 00-800-500-55-500
RUSSIA 8-800-555-55-55 www.samsung.ru
UKRAINE 8-800-502-0000 www.samsung.ua
UZBEKISTAN 8-800-120-0-400 www.samsung.uz
BN68-01169Q-00L02-cover.indd 1 2007-10-01 �� 9:53:01
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-01169Q-00Eng-1002.indd 1 2007-10-04 �� 9:17:58
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ....................................................... 3
Viewing the Control Panel................................. 4
Viewing the Connection Panel .......................... 5
Viewing the Remote Control ............................. 7
Installing Batteries in the Remote Control ........ 8
Switching On and Off ........................................ 8
Placing Your Television in Standby Mode ......... 8
Plug & Play ....................................................... 9
SETTING THE CHANNELS
Storing Channels Automatically ...................... 10
Storing Channels Manually ..............................11
Setting the Channel Lists ................................ 12
Activating the Child Lock ................................ 12
Sorting the Stored Channels ........................... 13
Assigning Channels Names ............................ 13
Fine Tuning Channel Reception ..................... 14
LNA (Low Noise Amplier) .............................. 14
SETTING THE PICTURE
Changing the Picture Standard ....................... 15
Adjusting the Custom Picture ......................... 15
Changing the Colour Tone .............................. 16
Activating Backlight ......................................... 16
Conguring Detailed Settings on the
Picture ............................................................. 17
Changing the Picture Size .............................. 18
Freezing the Current Picture ........................... 19
Selecting the Screen Mode ............................. 19
Resetting the Picture Settings to the
Factory Defaults .............................................. 19
Digital NR / Active Colour / DNIe ................... 20
Viewing the Picture In Picture (PIP) ................ 21
HDMI Black Level ........................................... 22
SETTING THE SOUND
Changing the Sound Standard ....................... 22
Adjusting the Sound Settings .......................... 23
Setting the TruSurround XT (SRS TS XT) ...... 23
Connecting Headphones ................................ 24
Selecting the Sound Mode .............................. 24
Adjusting the Volume Automatically ................ 24
Selecting the Internal Mute ............................. 25
Listening to the Sound of the Sub Picture ...... 25
Resetting the Sound Settings to the Factory
Defaults ........................................................... 26
SETTING THE TIME
Setting and Displaying the Current Time ........ 26
Setting the Sleep Timer .................................. 27
Switching the Television On and Off
Automatically .................................................. 27
FUNCTION DESCRIPTION
Choosing Your Language ............................... 28
Using Game Mode .......................................... 28
Blue Screen / Melody / Energy Saving ........... 29
Setting the Light Effect .................................... 29
Selecting the Source ....................................... 30
Editing the Input Source Names ..................... 30
English - 1
English
BN68-01169Q-00Eng-1002.indd 1 2007-10-04 �� 9:17:59
English - 2
Symbol Press Important Note One-Touch
Button
USING THE DTV FEATURE
Previewing the DTV Menu System ................. 31
Updating the Channel List Automatically ........ 32
Updating the Channel List Manually ............... 32
Editing Your Favourite Channels .................... 33
Selecting Channel List .................................... 35
Displaying Programme Information ................ 35
Viewing the EPG (Electronic Programme
Guide) Information .......................................... 36
Using the Scheduled List ................................ 37
Setting the Default Guide ................................ 37
Viewing All Channels and Favourite
Channels ......................................................... 38
Adjusting the Menu Transparency .................. 38
Setting up the Parental Lock ........................... 39
Setting the Subtitle .......................................... 40
Setting the Subtitle Mode ................................ 40
Selecting the Audio Format ............................. 40
Selecting the Digital Text (UK only)................. 41
Selecting the Time Zone (Spain only) ............. 41
Viewing Product Information ........................... 41
Checking the Signal Information ..................... 42
Upgrading the Software .................................. 42
Viewing Common Interface ............................. 43
Selecting the CI (Common Interface) Menu ... 43
Resetting ......................................................... 44
Selecting the Preferred Language
(Subtitle, Audio or Teletext) ............................. 44
Preference ...................................................... 45
USING THE TELETEXT FEATURE
Teletext Feature .............................................. 46
Setting Up Your Remote Control ..................... 47
Remote Control Codes ................................... 48
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ................................. 51
Display Modes ................................................ 51
Setting the PC ................................................. 52
Setting the Home Theatre PC ......................... 53
RECOMMENDATIONS FOR USE
How to Adjust the Stand ................................. 53
How to Adjust the Angle of the TV .................. 53
Installing the Wall Mount Kit ............................ 54
Installing VESA compliant mounting devices .. 54
Using the Decoration Covers .......................... 54
Using the Anti-Theft Kensington Lock ............. 55
Troubleshooting: Before Contacting
Service Personnel ........................................... 55
Technical and Environmental Specications .. 56
BN68-01169Q-00Eng-1002.indd 2 2007-10-04 �� 9:17:59
English - 3
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord Wall Mount kit Owner’s Instructions
Warranty Card/
Registration Card/
Safety Guide Manual
(Not available in all locations)
Decoration Cover Cleaning Cloth
The stand and stand screw may not be included depending on the model.
BN68-01169Q-00Eng-1002.indd 3 2007-10-04 �� 9:17:59
English - 4
Viewing the Control Panel
1 SOURCE
Toggles between all the available input
sources (TV, Ext., AV, S-Video, Component,
PC, HDMI, DTV). In the on-screen menu, use
this button as you use the ENTER/OK button
on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s
features.
In case of DTV mode, the DTV menu appears.
3
Press to decrease or increase the volume.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the
and
buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
5 (Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6 Remote Control Sensor
Aim the remote control towards this spot on
the TV.
7 Speakers
The product colour and shape may vary depending on the model.
Front Panel buttons
Touch the each button to operate.
BN68-01169Q-00Eng-1002.indd 4 2007-10-04 �� 9:18:00
English - 5
Viewing the Connection Panel
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2 Connecting HDMI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and
multiple channels of digital audio.
- The HDMI/DVI IN terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in
size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
Connector
EXT
Video
o
Audio (L/R)
o
RGB
o
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Input
Power Input
AV IN
PC IN
PC
DVI IN
HDMI/DVI IN
AUDIO
AUDIO
VIDEO
AUDIO
EX-LINK
S-VIDEO
1 2
3
5
6
7
890!
The product colour and shape may vary depending on the model.
[Side Panel Jacks]
4
BN68-01169Q-00Eng-1002.indd 5 2007-10-04 �� 9:18:00
English - 6
Supported modes for HDMI/DVI and Component
- The HDMI/DVI IN jack support PC connection.
3 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
4 Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5
Connecting CI (Common Interface) CARD
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your
service provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD
may cause damage to it.
Insert the CI-Card in the direction marked on it.
7 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (6) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
8 DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the
DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
9
EX-LINK
- Service connection for qualified service engineer.
0 Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("P
R
", "P
B
", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("P
R
", "P
B
", "Y") on your
set.
- The P
R
, P
B
and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
! Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
BN68-01169Q-00Eng-1002.indd 6 2007-10-04 �� 9:18:00
English - 7
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired and has Braille points on the Power,
Channel, STOP, PLAY/PAUSE and Volume buttons.
Viewing the Remote Control
1 Selects a target device to be
controlled by the Samsung
remote control (TV, DVD,
STB, CABLE, VCR)
(Refer to page 47~50)
2 Television Standby button
3 Number buttons for direct
channel access
4
One/Two-digit channel
selection
5 It display "Channel List"
on the screen.
6 Selects the TV and DTV
mode directly
7 VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
8 Volume increase
Volume decrease
9 Temporary sound switch-off
0 Menu display and
change confirmation
! Returns to the previous
menu
@ SRS TS XT selection
#
Electronic Program Guide
(EPG) display
$ Picture size selection
% Sound effect selection
^
Adjusts 5 separate devices
- TV, DVD, STB, CABLE or
VCR
.
&
When pressing this button, a
number of buttons on the
remote control (e.g. Selects
a target device, volume,
channel buttons) light up
for a few seconds and then
turn off to save power. This
function is to conveniently
use the remote control at
night or when dark.
* Available source selection
( Previous channel
) DTV menu display
a
Selects the HDMI mode
directly.
b P : Next channel
P : Previous channel
c Exit the OSD
d
Control the cursor in the
menu
e Use to see information on
the current broadcast
g Colour buttons: Press to add
or delete channels and to
store channels to the favorite
channel list in the “Channel
List” menu.
h Picture-In-Picture On / Off
i Digital subtitle display
j Picture effect selection
k Picture freeze
l
When your remote does not
work, change the batteries
and press the "RESET"
button for 2-3 seconds before
use.
Teletext Functions
6 Exit from the teletext display
0 Teletext index
$ Teletext size selection
*
Teletext mode selection
(LIST/FLOF)
( Teletext sub page
b P
: Teletext next page
P : Teletext previous page
c Teletext cancel
e Teletext reveal
f
Alternately select Teletext,
Double or Mix.
g Fastext topic selection
h Teletext hold
j Teletext store
BN68-01169Q-00Eng-1002.indd 7 2007-10-04 �� 9:18:00
English - 8
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2.
Press the button on the front of the set.
You also can press the POWER button or the TV/DTV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
4. To switch your set off, press the POWER button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2.
To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example). It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
BN68-01169Q-00Eng-1002.indd 8 2007-10-04 �� 9:18:01
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local dealer
if you can receive DVB-T signals. Although this TV set follows
the DVB-T specification, maintaining compatibility with the future
coming DVB-T digital terrestrial broadcasts is not guaranteed.
Several functions may not be available in some countries.
1. Press the POWER button on the remote control.
The message "Запуск Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
3. Press the
or
button to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER/OK button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
6. The message “Some DTV functions may not be available. Digital Scan?" is displayed.
Press the or button to select “Yes” or “No”, then press the
ENTER/OK button.
This function is supported for all countries except for the following 6 countries: the United
Kingdom, Austria, France, Germany, Italy and Spain.
7.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER/OK
button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 32 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER/OK button.
Select the "Month", "Day", "Year", "Hour" or "Minute" by pressing the or button.
Set the "Month", "Day", "Year", "Hour" or "Minute" by pressing the or button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons on
the remote control.
9. Press the ENTER/OK button to confirm your setting. The message "Enjoy your viewing" is displayed.
When you have finished, press the
ENTER/OK button.
Even if the ENTER/OK button is not pressed, the message will automatically disappear after several
seconds.
Plug & Play
Yes
:
First an ATV search is performed and then a DTV ch. auto search is performed.
No
:
Only an ATV search is performed.
Language
: Select your language.
Country
: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Запуск Plug & Play
Вxод Выход
OK
BN68-01169Q-00Eng-1002.indd 9 2007-10-04 �� 9:18:01
English - 10
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the
ENTER/OK button.
2.
Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
(Refer to page 9)
- Storing Channels Automatically
- Storing Channels Manually
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER/OK button.
2.
Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. (Refer to page 32)
4. Press the
or
button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (Refer to page 13)
Storing Channels Automatically
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Medium
PC
Home Theatre PC
Light Effect :
In Watching TV
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Move Enter Return
Plug & Play
Start Plug & Play.
Enter Return
OK
BN68-01169Q-00Eng-1002.indd 10 2007-10-04 �� 9:18:02
English - 11
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the or button to select "Channel", then press the ENTER/OK button.
2.
Press the or button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the or
button and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the or button to select "Colour System", then press the ENTER/OK button.
6.
Select the colour standard required by pressing the or button then, press the ENTER/OK button.
7. Press the or button to select "Sound System", then press the ENTER/OK button.
8.
Select the sound standard required by pressing the or button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the ▲ or button to select "Channel".
Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the or
button. Press the button to select channel.
Select the required number by pressing the ▲ or button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10.
If you do not know the channel numbers, press the or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the or ▼ button and then press the ENTER/OK button.
11. Press the or button to select "Store". Press the ENTER/OK button to select "OK".
12.
Repeat steps 3 to 11 for each channel to be stored.
BN68-01169Q-00Eng-1002.indd 11 2007-10-04 �� 9:18:02
English - 12
Set the channels according to your preference.
You can easily delete, add or lock the channel you want.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER/OK button.
2.
Press the
or
button to select "Channel Manager",
then press the ENTER/OK button.
3. Press the ENTER/OK button again, to select "Channel List".
4. Press the
button to select " " line.
5. Press the
or
button to select the undesired channel,
then press the ENTER/OK button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT button to exit.
" " is active when "Child Lock" is selected to "On".
You can select these options by simply pressing the CH LIST
button on the remote control
Setting the Channel Lists
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting,
so keep the remote control away from children.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER/OK button.
2.
Press the
or
button to select "Channel Manager",
then press the ENTER/OK button.
3. Press the
or
button to select "Child Lock", then press
the ENTER/OK button.
4. Press the
or
button to select "On". Press the
ENTER/OK button.
5. Press the
or
button to select "Channel List",
then press the ENTER/OK button.
6. Press the
button to select " " line.
7. Press the
or
button to select the channels you want to
lock, then press the ENTER/OK button.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
Activating the Child Lock
TV
Channel Manager
Channel List
Child Lock :
Off
On
P 1 C3
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Move Enter Return
P 1 C3
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
BN68-01169Q-00Eng-1002.indd 12 2007-10-04 �� 9:18:04
English - 13
You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels
that you watch most often.
1.
Press the MENU button to display the menu. Press the
or
button to select "Channel", then press the ENTER/OK button.
2. Press the
or
button to select "Sort", then press the
ENTER/OK button.
3. Select the channel number that you wish to change by press
ing the
or
button repeatedly. Press the ENTER/OK
button.
The selected channel number and name are moved to
right side.
4. Press the
or
button to move to the position in which you
would like to change and then press the ENTER/OK button.
The selected channel is exchanged with the one
previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT button to exit.
Sorting the Stored Channels
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1.
Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER/OK button.
2.
Press the
or
button to select "Name", then press the
ENTER/OK button.
3. If necessary, select the channel to be assigned to a new
name by pressing the
or
button. Press the ENTER/OK
button.
The selection bar is displayed around the name box.
4.
The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /
Special characters (space, /, *, -, +)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Press the...
▲ or button
► button
◄ button
ENTER/OK button
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Sort
Prog. Ch. Name
30 C50
-----
31 C23
-----
32 C16
-----
33 C32
-----
34 C33
-----
35 C34
-----
36 C35
-----
37 C36
-----
38 C37
-----
39 C38
-----
TV
Move Enter Return
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Move Enter Return
TV
Name
Move Enter Return
Prog. Ch. Name
30 C50
-----
31 C23
-----
32 C16
-----
33 C32
-----
34 C33
-----
35 C34
-----
36 C35
-----
37 C36
-----
38 C37
-----
39 C38
-----
TV
BN68-01169Q-00Eng-1002.indd 13 2007-10-04 �� 9:18:05
English - 14
Use fine tuning to manually adjust a particular channel for
optimal reception.
1.
Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER/OK button.
3. Press the
or
button to select "Fine Tune", then press
the ENTER/OK button.
4. Press the
or
button to adjust the fine tuning.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
or
button and then press the ENTER/OK button.
Fine Tuning Channel Reception
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
Fine Tune
P 1
0
Reset
TV
Move Enter Return
Adjust Save Return
If the tV is operating in a weak-signal area, the lna function
can improve the reception (a low-noise preamplifier boosts
the incoming signal).
1.
Press the menu button to display the menu.
Press the or button to select "Channel", then press the
ENTER/OK button.
2. Press the or button to select "LNA", then press the
ENTER/OK button.
3. Press the or button to select "On" or "Off".
Press the ENTER/OK button.
4. Press the exIt button to exit.
LNA (Low Noise Amplier)
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
TV
Move Enter Return
Off
On
BN68-01169Q-00Eng-1002.indd 14 2007-10-04 �� 10:07:33
English - 15
You can select the type of picture which best corresponds to
your viewing requirements.
1.
Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2.
Press the ENTER/OK button again to select "Mode".
3. Press the
or
button to select the desired picture effect.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition
in a bright room.
Standard:
Selects the picture for optimum display
in a normal environment.
Movie: Selects the picture for comfortable display
in a dark room.
The "Picture" mode must be adjusted separately for each
input source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
Changing the Picture Standard
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint:
Adjusts the colour of objects, making them more red or green for a more natural look.
Your set has several settings which allow you to control
picture quality.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the
or
button to select a particular item. Press the
ENTER/OK button.
3. Press the
or
button to decrease or increase the value of
a particular item. Press the ENTER/OK button.
4. Press the EXIT button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
"Tint" is only activated for NTSC broadcasting, DTV broadcasting, and Component modes.
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Dynamic
Standard
Movie
BN68-01169Q-00Eng-1002.indd 15 2007-10-04 �� 9:18:08
English - 16
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the or button to select "Colour Tone", then press
the ENTER/OK button.
3. Press the or button to select the desired colour tone
setting. Press the ENTER/OKbutton.
4. Press the EXIT button to exit
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
The adjusted values are stored according to the selected "Picture" mode.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be
selected.
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Cool 2
Cool 1
Normal
Warm 1
Warm 2
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
Activating Backlight
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the or button to select “Backlight”, then press the
ENTER/OK button.
3. Press the or button to decrease or increase the value of
a particular item.
4. Press the ENTER/OK button.
Press the EXIT button to exit.
The adjusted values are stored according to the selected
"Picture" mode.
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
10
Backlight
Adjust Return
BN68-01169Q-00Eng-1002.indd 16 2007-10-04 �� 9:18:10
English - 17
You can set detailed picture settings.
1. Press the MENU button to display the menu.
2. Press the ENTER/OK button, to select "Picture".
3. Press the or ▼ button to select "Detailed Settings", then
press the ENTER/OK button.
4. Select the required option by pressing the or button,
then press the ENTER/OK button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space.
5. When you are satisfied with your setting, press the
ENTER/OK button.
6. Press the EXIT button to exit.
When the picture mode is set to "Movie" or "Standard",
"Detailed Settings" can be selected.
If "DNIe" is Off, the "Detailed Settings" cannot be selected
when the "Picture" mode is in "Standard" mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the or button until you reach the optimal setting.
White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or button, then press the ENTER/OK button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or button, then press the ENTER/OK button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
Conguring Detailed Settings on the Picture
Detailed Settings
Black Adjust : Off
Dynamic Contrast
: Off
Gamma : 0
White Balance
My Colour Control
Edge Enhancement
: Off
Colour Space
: Auto
Move Enter Return
TV
Picture
Mode : Movie
Contrast 80
Brightness 45
Sharpness 10
Colour 53
Tint G 50 R 50
Colour Tone : Warm2
Detailed Settings
Backlight : 5
Size : Auto Wide
Screen Mode : 16 : 9
More
Move Enter Return
TV
BN68-01169Q-00Eng-1002.indd 17 2007-10-04 �� 9:18:11
English - 18
You can select the picture size which best corresponds to
your viewing requirements.
1.
Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2.
Press the
or
button to select "Size", then press the
ENTER/OK button.
3. Select the required option by pressing the
or
button.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
"Auto Wide" function is available only in "TV", "Ext.", "AV",
"S-Video" and "DTV" mode.
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Zoom : Select by pressing the
or
button.
Use the
or
button to move the picture up and
down. After selecting , use the
or
button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the
or
buttons after selecting the by pressing the
or ENTER/OK button.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Size
Auto Wide
Wide
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Move Enter Return
TV
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
Size : Auto Wide
Screen Mode : 16 : 9
More
TV
Move Enter Return
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
Wide: Adjusts the picture size to 16:10 appropriate for DVDs or
wide broadcasting.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3: This is the default setting for a video movie or normal
broadcasting.
Just Scan: Displays the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
BN68-01169Q-00Eng-1002.indd 18 2007-10-04 �� 9:18:12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117

Samsung LE19R86BD Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

на других языках