MOX8

Yamaha MOX8, MOX6 Инструкция по установке

  • Здравствуйте! Я прочитал руководство по установке Yamaha MOX Remote Tools. Готов ответить на ваши вопросы о настройке и использовании этого программного обеспечения для синтезаторов MOX6 и MOX8, включая установку, минимальные системные требования и функциональность редактора и расширения для работы с Cubase.
  • Какие минимальные системные требования для установки MOX Remote Tools?
    Как установить MOX Remote Tools?
    Что делать, если я не согласен с условиями лицензионного соглашения?
    Какие ограничения на использование ПО?
MOX6/MOX8 Remote Tools Installation Guide 1
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS
BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).
BY Downloading, installing, copying, or otherwise using this software YOU ARE AGREEING to BE BOUND BY THE TERMS OF THIS LICENSE.
If you do not agree with the terms, do not download, install, copy, or otherwise use this software. if you have downloaded or installed THE
SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The
term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s
licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data
created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights.
You may use the SOFTWARE on a single computer.
You m ay make one copy of the SOFTWARE in machine-readable form for backup purposes only, if the SOFTWARE is on media where
such backup copy is permitted. On the backup copy, you must reproduce Yamaha’s copyright notice and any other proprietary legends
that were on the original copy of the SOFTWARE.
You m ay permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the
recipient reads and agrees to the terms of this Agreement.
2. RESTRICTIONS
You m ay n o t engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE
by any method whatsoever.
You m ay n o t reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the
SOFTWARE.
You m ay n o t electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other
computers.
You m ay n o t use the SOFTWARE to distribute illegal data or data that violates public policy.
You m ay n o t initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following
restrictions which you must observe.
Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners
in public without permission of the copyright owner.
The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified
without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or
provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such
termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided
“AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY
DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED.
SOFTWARE LICENSE AGREEMENT
MOX6/MOX8 Remote Tools
Installation Guide
MOX6/MOX8 Remote Tools
Installation Guide
MOX6/MOX8 Remote Tools Installation Guide 2
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT
SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in
contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data
accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must
abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any
way for the THIRD PARTY SOFTWARE or your use thereof.
Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or
consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD
PARTY SOFTWARE.
7. G E N E R A L
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute
or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this
Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written
materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this
Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of
Yamaha.
The software and this Installation Guide are the exclusive copyrights of Yamaha Corporation.
Please read carefully the Software Licensing Agreement at the front of this Installation Guide before installing the application.
Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written
consent of the manufacturer.
Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this Installation Guide and the software.
Future upgrades of application and system software and any changes in specifications and functions will be announced at the following
website.
http://www.yamahasynth.com/
The screen displays as illustrated in this Installation Guide are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for
your personal use.
Windows is a registered trademark of Microsoft
®
Corporation in the United States and other countries.
Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies.
Special Notices
MOX6/MOX8 Remote Tools Installation Guide 3
MOX6/MOX8 Remote Tools consists of two software components: MOX6/MOX8 Remote Editor and MOX6/MOX8
Extension. MOX6/MOX8 Remote Editor is software which lets you edit/create Control Templates for the MOX6/
MOX8 Music Synthesizer. MOX6/MOX8 Extension is software component that enables you to use the MOX6/MOX8
along with Cubase series (version 5.1.1 or later). The MOX6/MOX8 Remote Tools Installer installs these two
software components.
Windows
MOX6/MOX8 Remote Editor
Windows XP
Windows Vista
Windows 7
MOX6/MOX8 Extension
The system requirements of MOX6/MOX8 Extension are the same as Cubase series (version 5.1.1 or later).
About MOX6/MOX8 Remote Tools
Minimum System Requirements
OS:
Windows XP Professional SP3 or later/Home Edition SP3 or later
CPU:
1GHz or higher; Intel Pentium/Celeron/Core processor
Available Memory:
256MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
Yamaha Steinberg USB Driver version 1.2.0 or later
OS:
Windows Vista SP1 or later
CPU:
(32-bit OS) 1GHz or higher, Intel Pentium/Celeron/Core processor
(64-bit OS) Intel 64 compatible, Intel Pentium/Celeron/Core processor
Available Memory:
512MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
Yamaha Steinberg USB Driver version 1.2.0 or later
OS:
Windows7
CPU:
(32-bit OS) 1GHz or higher, Intel Pentium/Celeron/Core processor
(64-bit OS) Intel 64 compatible, Intel Pentium/Celeron/Core processor
Available Memory:
(32-bit OS) 1GB or more
(64-bit OS) 2GB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
Yamaha Steinberg USB Driver version 1.2.0 or later
MOX6/MOX8 Remote Tools Installation Guide 4
Mac
MOX6/MOX8 Remote Editor
MOX6/MOX8 Extension
The system requirements of MOX6/MOX8 Extension are the same as Cubase series (version 5.1.1 or later). Note
that MOX6/MOX8 Extension does not support PowerPC architectures.
To use the MOX6/MOX8 Remote Tools, you will need to install additional applications, as described below.
1 Install a DAW software, such as Cubase.
2 Install an appropriate Yamaha Steinberg USB Driver.
Download the latest driver from our website:
http://www.yamahasynth.com/downloads/
3 Install the MOX6/MOX8 Remote Tools.
Refer to “Installing the MOX6/MOX8 Remote Tools.”
OS:
Mac OS X 10.5 or later
CPU:
Intel CPU
Available Memory:
256MB or more
Hard Disk:
50MB or more
Other:
USB 1.1 or USB 2.0 interface
Yamaha Steinberg USB Driver version 1.2.0 or later
NOTE
Keep in mind that the software is often updated and the system requirements are subject to change. You can check
the latest version information of each program and its system requirements at the following website:
http://www.yamahasynth.com/downloads/
The system requirements may differ slightly depending on the particular computer.
Software Installation
MOX6/MOX8 Remote Tools Installation Guide 5
Follow the instructions below to install the MOX6/MOX8 Remote Tools programs.
Windows
1 After the downloaded compressed file is properly extracted, double-click the “Install
MOX6_MOX8 Remote Tools 32bit.exe” (for 32-bit OS) / “Install MOX6_MOX8 Remote Tools
64bit.exe” file.
The MOX6/MOX8 Remote Tools setup dialog appears.
2 Follow the on-screen instructions to install the software.
When the MOX6/MOX8 Remote Tools and the other necessary software is installed, you can start the MOX6/
MOX8 Remote Editor.
3 Start a Steinberg-made DAW software (such as Cubase), then quit it.
This operation is necessary to scan through the DAW software so that the MOX6/MOX8 Remote Editor obtains
the VST Instruments related information.
Mac
1 After the downloaded compressed file is properly extracted, double-click the “Install
MOX6_MOX8 Remote Tools.pkg” file.
The MOX6/MOX8 Remote Tools setup dialog appears.
2 Follow the on-screen instructions to install the software.
When the MOX6/MOX8 Remote Tools and the other necessary software is installed, you can start the MOX6/
MOX8 Remote Editor.
3 Start a Steinberg-made DAW software (such as Cubase), then quit it.
This operation is necessary to scan through the DAW software so that the MOX6/MOX8 Remote Editor obtains
the VST Instruments related information.
Installing the MOX6/MOX8 Remote Tools
NOTE
If the “User Account Control” window appears, click [Continue].
NOTE
Only DAW software produced by Steinberg (such as Cubase series compatible with MOX6/MOX8 Remote Tools)
can be scanned for obtaining the VST Instruments related information.
NOTE
Only DAW software produced by Steinberg (such as Cubase series compatible with MOX6/MOX8 Remote Tools)
can be scanned for obtaining the VSTi-related information.
MOX6/MOX8 Remote Tools Installation Guide 6
To remove the installed editors from Windows:
When using Windows Vista / 7
Select [Start] [Control Panel] [Programs and Features] or [Uninstall a program], then select the application to
be remove and click [Uninstall/Change].
Follow the on-screen instructions to unistall the application.
If the “User Account Control” window appears, click [Continue] or [Yes].
When using Windows XP
Select [START] [Control Panel] [Add/Remove Programs] or [Install/Uninstall], then select the application to be
removed and click [Add/Remove…].
Follow the on-screen instructions to uninstall the application.
Windows Software Uninstall
(removing the Installed application)
NOTE
The button names or menus may differ depending on the computer OS.
U.R.G., Digital Musical Instruments Division
© 2011 Yamaha Corporation
105MW-B0
/