Yamaha MOX6 Инструкция по применению

MOX6/MOX8 Editor Owner’s Manual 1

Contents

What is the MOX6/MOX8 Editor?.............................................2

Studio Manager.........................................................................2

Studio Connections..................................................................2

About Open Plug-in Technology.............................................3

Data Structure of the MOX6/MOX8 Editor...............................4

Starting the MOX6/MOX8 Editor ..............................................5

An Example of MOX6/MOX8 Editor in Use .............................7

MOX6/MOX8 Editor Window ..................................................12

Basic Operations....................................................................31

Menu ........................................................................................33

Troubleshooting .....................................................................48

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal

use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the

screens which appear on your computer.

• Windows is the registered trademarks of Microsoft

Corporation.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective

companies.

• Click on the red-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Mac operations. If you are not,

please refer to the owner’s manual which came with your Windows/Mac software before using the MOX6/MOX8

Editor.

For information about hardware requirements, the interconnection of devices and the installation of the MOX6/MOX8

Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI

device.

MOX6/MOX8 Editor

Owner’s Manual

MOX6/MOX8 Editor

Owner’s Manual

What is the MOX6/MOX8 Editor?

MOX6/MOX8 Editor Owner’s Manual

What is the MOX6/MOX8 Editor?

MOX6/MOX8 Editor is a convenient tool which lets you edit and save the various parameters of your MOX6/

MOX8 tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the

MOX6/MOX8) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand

graphical interface, you can edit various parameters of the MOX6/MOX8 right from your computer — using

the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard.

Finally, all the changes you have made can be saved to your computer or transmitted to the MOX6/MOX8

instrument.

You can use this MOX6/MOX8 Editor as a plug-in for the software below

• Studio Manager

• DAW application software compatible with Studio Connections

The MOX6/MOX8 Editor lets you adjust the hue as desired (page 6). This manual uses example screen shots

having the most universal color visibility, allowing the manual to be easily viewed by many people having

different types of color recognition.

Studio Manager

Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling

Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a

stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such

as Cubase or Cubase AI.

For more information, refer to the Studio Manager PDF manual.

Studio Connections

Studio Connections is a joint project begun by Steinberg and Yamaha.

Music production systems now increasingly rely on both software and

hardware, and there is a pressing need for closer integration between the

two. Studio Connections provides a comprehensive and seamless music

production environment — making the use of hardware and software both

easier and much more efficient. The following functions are available in

Studio Connections.

Recall

With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up

again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and

control the entire system easily, instantly and automatically.

Recall is especially convenient when used with a DAW application compatible with Studio Connections. This

lets you save the Editor data directly to the project file of the DAW letting you recall all necessary hardware

settings automatically by simply opening the project file.

When executing the Recall function in the Studio Manager, the parameter settings of either device (MOX6/MOX8 or

DAW software on a computer) are synchronized with the other. You can determine which device (MOX6/MOX8 or

DAW software) is regarded as the master of the parameter settings by setting the Auto Sync Setting (page 36).

About Open Plug-in Technology

MOX6/MOX8 Editor Owner’s Manual

Audio Integration

Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that

they let you easily change the various settings and parameters within the host application. However, control

over hardware is not so easy — with the need for various setups such as audio connections, driver settings

and MIDI port connections.

By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer

within the application, without the need to set up complex connections within a DAW software application —

just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all

this possible. For details about Recall and Audio Integration, visit our web site at:

http://www.studioconnections.org/

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music

DAW application software. For example, this allows you to start up and operate various parts of your music

system, such as voice editors of the synthesizer and mixing control editors — directly from an OPT-

compatible software, without having to use each separately. OPT also makes it unnecessary to set MIDI

drivers for each application, streamlining your music production system and making all operations more

convenient and seamless.

In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections,

is also available. The host application Studio Manager supports OPT 2.

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient

functions for Studio Connections.

Plug-in software compatible with OPT 2 is indirectly

connected to the DAW application compatible with

Studio Connection, via the Studio Manager.

Host

Application

Editor

Studio

Manager

OPT 2

Data Structure of the MOX6/MOX8 Editor

MOX6/MOX8 Editor Owner’s Manual

Data Structure of the MOX6/MOX8 Editor

The MOX6/MOX8 Editor lets you create the following data and save them as a single file (extension: X4E).

• Current Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)

Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to

each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for

each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOX6/

MOX8 Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save

the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can easily

recall the latest status of the previous edit simply by opening the file.

n The MOX6/MOX8 Editor handles the Global data which includes some of the parameters shown on the “G” row in the

Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 17 and 25).

The diagram illustrated below indicates the structure of the data created via the MOX6/MOX8 Editor, the

structure of the data stored in the internal memory of the MOX6/MOX8 instrument and the relationship

between those two types of data.

*1 When the MOX6/MOX8 instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOX6/MOX8 Editor affects the same parameter on the MOX6/MOX8

itself, and vice versa.

*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOX6/MOX8 instrument as well as the memory of the Editor.

*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOX6/MOX8 instrument.

MOX6/MOX8 Editor

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Part Voice data

(16 Voices)

Mixing Voice data

(16 Voices)

Store Voice

(page 43)

Store Voice

(page 43)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Editor file

(Extension: .X4E)

Data sync

Current Global data

Current data in the Voice mode

Current data in the Song or

Pattern mode

• Mixing data

• Multi Common data

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Drum User (32 Voices)

Part Voice data

(16 Voices)

Mixing data

• Multi Common data

Mixing Voice data

(16 Voices)

Store Voice

(page 43)

Store Voice

(page 43)

Store Voice

(page 43)

Store Mixing

(page 44)

Store Global

(page 43)

MOX6/MOX8 instrument

Store Voice

(page 43)

Project file of the DAW application (computer)

Starting the MOX6/MOX8 Editor

MOX6/MOX8 Editor Owner’s Manual

Starting the MOX6/MOX8 Editor

Install the Yamaha Steinberg USB Driver, Studio Manager and MOX6/MOX8 Editor by following the

respective Installation Guides, then install the host application such as Cubase if necessary. After making

the required connection and setting the MIDI IN/OUT parameter to “USB” in the Utility mode, follow the

instructions below to start the MOX6/MOX8 Editor.

n For details about connection between the MOX6/MOX8 and a computer, refer to the Owner’s Manual of the MOX6/

MOX8.

1. Start the Studio Manager.

Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or

can be started as a stand-alone application.

2. Set the MIDI Ports.

When starting Studio Manager as a stand-alone application:

Set the MIDI Ports by calling up the MIDI Ports window.

Windows: [File]  [Setup]  [MIDI Settings]

Mac: [File]  [Preference]  [MIDI Settings]

Enter the checkmarks to the boxes of Ports 1 and 4 for the MOX6/MOX8 in both the Input Ports and the

Output Ports, as illustrated below.

When starting Studio Manager as a plug-in:

Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application.

When connecting the MOX6/MOX8 to a computer via a USB cable, the MIDI Ports are automatically set

simply by starting Studio Manager from Cubase or Cubase AI.

3. Start the MOX6/MOX8 Editor from the window of the Studio Manager.

For details, refer to the Installation Guide and the PDF manual of the Studio Manager.

When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections

(within a compatible DAW), you can start the MOX6/MOX8 Editor just as you would any other software

synthesizer. For details, visit the following web site.

http://www.studioconnections.org/

Starting the MOX6/MOX8 Editor

MOX6/MOX8 Editor Owner’s Manual

Adjusting the hue of the display

The MOX6/MOX8 Editor lets you adjust the hue as desired.

1. At the left bottom of the Editor window, click the triangle button to call up the slider.

Click the triangle button again to close the slider.

2. Drag or click the slider to adjust the hue.

In Windows, to reset the hue to its default, simultaneously hold down the <Ctrl> key and click on the

slider.

On the Mac, to reset the hue to its default, simultaneously hold down the <Command> key and click

on the slider.

For details about slider operation, refer to page 32.

An Example of MOX6/MOX8 Editor in Use: Editing in the Voice mode

MOX6/MOX8 Editor Owner’s Manual

An Example of MOX6/MOX8 Editor in Use

There is no single way to use the many components in the MOX6/MOX8 Editor. Your editing needs and

preferences may differ; however, the following example gives you a simple step-by-step guide in how to use

the MOX6/MOX8 Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a

Mixing program in the Song mode, then store the edited data to the memory of the MOX6/MOX8 instrument

and save the final results of your editing to a file.

Editing in the Voice mode

n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the

[Voice] indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of

the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync

window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you

should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data

Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the MOX6/MOX8 itself as starting data for editing, set the boxes of

Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the

computer. To use the settings on the MOX6/MOX8 Editor as starting data, set both Global, Current and

Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For

details, see page 35.

NOTICE

• Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the MOX6/

MOX8 (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data

currently on the Editor to the MOX6/MOX8 itself, automatically overwriting and erasing all the corresponding data

already existing on memory of the MOX6/MOX8 instrument. When you want to use the settings on the MOX6/MOX8

itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that

the data flows from the instrument to the computer.

• Make sure to set the desired data transfer direction in order to avoid data loss.

• Any data which was overwritten and lost accidentally cannot be recovered.

An Example of MOX6/MOX8 Editor in Use: Editing in the Voice mode

MOX6/MOX8 Editor Owner’s Manual

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization

is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE

indication automatically. In this ONLINE status, editing a parameter on the MOX6/MOX8 Editor affects

the same parameter on the MOX6/MOX8 itself, and vice versa.

For more information, refer to “ONLINE/OFFLINE” on page 12.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the

MOX6/MOX8 keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of

the window. By executing this operation, the Voice selection is reset to the original status and the VOICE

LIBRARY window closes.

NOTICE

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store

the edits, make sure to store the Voice by using the Store window (page 43) before changing the Voice.

An Example of MOX6/MOX8 Editor in Use: Editing in the Voice mode

MOX6/MOX8 Editor Owner’s Manual

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

MOX6/MOX8 keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n For details about Voice parameters, refer to “Editing a Normal Voice” and “Editing a Drum Voice” in the

Reference Manual.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 43).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Drum User

n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

An Example of MOX6/MOX8 Editor in Use: Mixing edit in the Song or Pattern mode

MOX6/MOX8 Editor Owner’s Manual

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the MOX6/MOX8 instrument

as well as that within the Editor.

NOTICE

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument)

will be overwritten. Select the destination Voice number carefully to prevent important data from being erased

accidentally. For this reason, important data should always be saved to a separate USB storage device.

n You can store the settings of the parameters in the “G” row except for the Chorus and Reverb settings by

clicking [Store Global] under [Edit] in the menu bar.

Mixing edit in the Song or Pattern mode

This section explains how to edit a Mixing program in the Song mode.

1. Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]

indication.

The Auto Sync appears automatically during ONLINE status.

2. From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is

completed, the Auto Sync window is closed.

3. Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Song or Pattern, click

(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/

Multi section and “1” – “16” in the Part section.

An Example of MOX6/MOX8 Editor in Use: Mixing edit in the Song or Pattern mode

MOX6/MOX8 Editor Owner’s Manual

To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n The MOX6/MOX8 Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice

mode. In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other

hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The

edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

4. Store the edited Voice or a Mixing, as necessary.

4-1 Select the [Mixing Store] under [Edit] in the menu bar then store the edited Mixing.

4-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 43) then store the Voice via the same

operations as in steps 6-1, 6-2, 6-3 and 6-4.

5. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file

(extension: *.X4E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single file

(extension: X4E). When you open this file next time to call up the Auto Sync window, click [Start] to

synchronize the status of the parameter settings between the MOX6/MOX8 Editor and the MOX6/MOX8

instrument.

The Save operation from the Cubase series File menu will save the Project file including the settings

made via the MOX6/MOX8 Voice Editor. This means that opening the same Project file next time will call

up the settings lastly made via the MOX6/MOX8 Voice Editor.

MOX6/MOX8 Editor Window: Overall section

MOX6/MOX8 Editor Owner’s Manual

MOX6/MOX8 Editor Window

Overall section

File, Edit, Bulk, Help

Refer to page 33.

Voice/Song/Pattern mode

Determines the mode of the MOX6/MOX8, Voice, Song or Pattern. As soon as “Voice,” “Song” or

“Pattern” is selected here, the mode of the MOX6/MOX8 instrument changes accordingly and the Auto

Sync window (page 47) opens. After setting parameters as necessary on this window, click [Start] to

execute data synchronization between the MOX6/MOX8 Editor and the MOX6/MOX8 instrument.

ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is

indicated, the edited status is completely synchronized between the MOX6/MOX8 Editor and the MOX6/

MOX8 instrument, meaning that any parameter edit you make on the MOX6/MOX8 Editor is reflected in

the same parameter on the MOX6/MOX8 instrument and vice versa. When OFFLINE is selected, editing

on the MOX6/MOX8 Editor will not affect the MOX6/MOX8 instrument and vice versa even if the MOX6/

MOX8 instrument is connected to a computer.

Note that the indication here is automatically changed according to the status of communication

between the MOX6/MOX8 Editor and the MOX6/MOX8 instrument. For example, the ONLINE status

changes automatically to OFFLINE when the cable is disconnected accidentally.

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE ( ) described below.

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the

MOX6/MOX8 instrument is not properly connected to a computer.

This OFFLINE indication shows that the MIDI Port is set properly and the MOX6/MOX8 is properly

connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you

can synchronize the settings between the MOX6/MOX8 Editor and the MOX6/MOX8 by clicking the [Start]

button. As soon as data synchronization is completed, the Auto Sync window is closed and the status of

the Editor changes from OFFLINE to ONLINE.

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync

window.

This OFFLINE indication shows that the MIDI Port is not set properly or the MOX6/MOX8 instrument is not

connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to

connect the MOX6/MOX8 instrument to a computer, set the MIDI Port properly then click the [Start] button

in the Auto Sync window to execute data synchronization between the MOX6/MOX8 Editor and the MOX6/

MOX8. As soon as data synchronization is completed, the Auto Sync window is closed and the status of

the Editor is changed from OFFLINE to ONLINE.

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor Owner’s Manual

When the Voice/Song/Pattern is set to “Voice”

Mixer section

Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a file. This indication is the same as the [F] indicator (page 20).

Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Edits the Master EQ parameters.

Chorus

Selects the Chorus type.

Reverb

Selects the Reverb type.

Master Effect

Turns the Master Effect on or off and selects the Master Effect type.

Volume

Adjust the entire volume.

[Voice]/[AD Part] tab

Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]

tab is active.

Before editing

After editing

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor Owner’s Manual

Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same

as the [V] indicator (page 27).

n The MIDI monitor mark is at the left side of the “V” mark. A small LED lights when the specific MIDI channel

receives MIDI messages.

Category, Bank, No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window

appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

Close button

Click this to close this window without applying the changes to the MOX6/MOX8 Editor.

[Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category

folders or Bank folders.

Before editing

After editing

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor Owner’s Manual

[+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

Folder (Category or Bank)

Click each folder to open or close it.

Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When

double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the

Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by

dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-

dropping the Voice(s) to a new location.

If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of

these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking on Windows / <control> key + clicking on Mac this section and selecting a menu,

you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

Search Box

You can search for your desired Voice by inputting a keyword here.

[Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE

LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the

appropriate checkboxes at the left of each Voice.

[OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the Voice selection.

Refresh

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOX6/MOX8 itself,

the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the

MOX6/MOX8. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using

the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Turns Arpeggio playback on or off for the current Voice.

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Mixer section)

MOX6/MOX8 Editor Owner’s Manual

When the [AD Part] is selected:

This section lets you edit parameters for the AD Part in the Voice mode.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD Part in the Voice

mode by using the graphic knobs.

n The Chorus Send and Reverb Send for the AD Part affect only when the USB I/O Mode parameter in the

Utility mode is set to “1 StereoRec.”

Volume

Adjusts the Volume for the AD Part.

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)

MOX6/MOX8 Editor Owner’s Manual

Parameter Category section

You can edit detailed parameters for the current Part by clicking the button (located near the top right of

the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)

MOX6/MOX8 Editor Owner’s Manual

The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or

AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”

indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at

the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row

appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.

Open/Close button

This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,

the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right

arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit

the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You

can also conveniently open and close the Detailed Parameter window from your computer keyboard.

Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to

open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close

it.

Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

Voice Common

This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.

“G” “V” “AD”

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Parameter Category section)

MOX6/MOX8 Editor Owner’s Manual

Element or Drum Key

This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected

(“Element” is shown in the Parameter Category section) and you select an Element number, then

clicking each of the parameter categories calls up the corresponding Element parameters in the

Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter

Category section) and you select a key number (from C0 – C6), then clicking each of the parameter

categories calls up the corresponding Drum Key parameters in the Detailed Parameter section.

Checkboxes for Elements (available when the Normal Voice is selected)

Turns each Element on or off.

[1] – [8], [All] buttons (available when the Normal Voice is selected)

Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the

Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of

all Elements in a single window.

Element Parameter categories (available when the Normal Voice is selected)

Indicates the categories of Element parameters. Clicking each of the categories calls up the

corresponding Element parameters in the Detailed Parameter section.

Checkbox for the Drum Key (available when the Drum Voice is selected)

Turns the current Drum Key on or off.

Drum Key (available when the Drum Voice is selected)

Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of

the triangular buttons below the key indication.

Drum Key Parameter categories (available when the Drum Voice is selected)

Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding

Drum Key parameters in the Detailed Parameter section.

This is shown when the AD Part is selected in the Mixer section. The Detailed Parameter section shows

the Effect-related parameters.

i (Information)

Indicates information about the parameter at the cursor arrow position. To view the information for a

desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this

Information feature on or off by clicking the “

i” box.

When the Normal Voice is selected: When the Drum Voice is selected:

MOX6/MOX8 Editor Window: When the Voice/Song/Pattern is set to “Voice” (Detailed Parameter section)

MOX6/MOX8 Editor Owner’s Manual

Detailed Parameter section

This section indicates the detailed parameters of the selected category for the current Voice or Global

settings. This section introduces what parameters belong to each of the Parameter Categories. For details

about each parameter, refer to the Owner’s Manual of the MOX6/MOX8.

Three Indicators showing the Editing Status

One or more of the following three indicators are shown at the right top of the window when you edit a

parameter.

n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and

“G” box in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing

Store and Global Store operation, respectively. The “F” indicator and the small squares at the top right of the

“G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the

small squares disappear if you execute the File Save operation.

Global Settings

This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the

following sub categories.

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed

Parameter section.

Controller Assign

Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed

Parameter section.

Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator

disappears when you execute Voice Store (page 43).

Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global

Store (page 43).

Indicates that the parameter edits are not saved yet as a file.

V, G , F

indicators

Страница загружается...

Yamaha MOX6, MOX8 Инструкция по применению

Похожие модели бренда