11
Multipoint pairing allows Aeropex to be connected to two devices at once,
allowing users to seamlessly transition between the two.
1. Start with your headphones off.
2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes
red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds.
Audrey says "multipoint enabled."
4. Open your first device's Bluetooth
®
menu and select "Aeropex by AfterShokz."
Audrey says "connected"
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing”
and the LED indicator flashes red and blue.
7. Open your second device's Bluetooth
®
menu and select "Aeropex by AfterShokz."
Audrey says "connected."
8. Turn your headphones off.
9. Turn your headphones onYour headphones are now connected to both devices.
10.To turn multipoint pairing off: Press and hold the multifunction button and volume-
button for 3 seconds. Audrey says "multipoint disabled."
Multipoint Pairing
Moisture Detected Alert
This device can detect liquid residue. During charging, if there is sweat or other liquid residues in
the charging interface, the device's light will flash blue and red. The core of the headphones will
also vibrate and emit a "Beeb Beeb" warning sound. Please dry the liquid on the charging port and
then the device can be charged normally.
More information: bit.ly/ASMultipoint