Simplicity CHAMPION DUAL STAGE SNOWTHROWER CE, MF 14.5TP 30" (76,2) Руководство пользователя

1751213

Revision -

Walkbehind Snowthrower

Mfg. No. Description

1695953 Dual Stage Snowthrower CE, 14.5 TP, 30 Inch (76,2 cm)

en Operator’s Manual

ru Руководство по эксплуатации

Not for

Reproduction

www.murray.com2

Not for

Reproduction

en

3

General Information

Thank you for purchasing this quality-built CHAMPION snowthrower. We’re pleased that you’ve placed your confidence in the

CHAMPION brand. When operated and maintained according to the instructions in this manual, your CHAMPION product will

provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with snowthrowers and how to

avoid them. This snowthrower is designed and intended only for snow throwing and is not intended for any other purpose. It is

important that you read and understand these instructions thoroughly before attempting to start or operate this equipment. Save

these instructions for future reference.

CONTENTS

Operator Safety...........................................................................................................4

Assembly...................................................................................................................10

Features and Controls .............................................................................................13

Operation...................................................................................................................15

Maintenance..............................................................................................................21

Troubleshooting........................................................................................................25

Warranty ....................................................................................................................27

Specifications ...........................................................................................................28

Record your model name/number, manufacturer’s

identification numbers, and engine serial numbers in the

space provided for easy access. These numbers can be

found in the locations shown.

When contacting your authorized dealer for

replacement parts, service, or information you MUST

have these numbers.

A. Manufacturer’s Identification Number

B. Manufacturer’s Serial Number

C. Power Rating in Kilowatts

D. Maximum Engine Speed in Rotations per Minute

E. Manufacturer’s Name and Address

F. Year of Manufacture

G. CE Compliance Logo

H. Mass of Unit in Kilograms

I. Guaranteed Sound Power in Decibels

Part No. xxxxxxx

xxxxxxxxxxxxxxx

Serial No. xxxxxxxxxx

20xx

kW: x.xx

xxxx max

xxxxxxxxxxxxxxxxxxxxxxx

xxx dB

kg: xxx

A

B

C

D

E

FG

H

I

PRODUCT REFERENCE DATA

Model Description Name/Number

Unit MFG Number Unit SERIAL Number

Mower Deck MFG Number Mower Deck SERIAL Number

Dealer Name Date Purchased

ENGINE REFERENCE DATA

Engine Make Engine Model

Engine Type/Spec Engine Code/Serial Number

CE Identification Tag

Product Reference Data

The Illustrated Parts List for this machine can be downloaded from www.murray.com. Please provide model and serial number

when ordering replacement parts.

CHAMPION is a trademark of Briggs & Stratton Power Products

Group, LLC Milwaukee, WI USA.

TABLE OF CONTENTS

Not for

Reproduction

OPERATOR SAFETY

Hazard Symbols and Meanings

Rotating

Impeller

NOTE: Not all control symbols shown on this page will

appear on your snowthrower. See Features and Controls

section for the applicable symbols.

Rotating

Auger

Rotating

Parts

Fire

Shock

Hot

Surface

Safe

Distance

Rotating

Gears

Thrown

Objects

Explosion

Toxic

Fumes

Ear

Protection

Eye

Protection

Moving

Parts

Kickback

Hazardous

Chemical

Control Symbols on Equipment

Oil

Fuel

Shutoff

Choke

Off

Choke

On

Stop

Slow

Fast

Auger

Clutch

Electric

Start

Engine

On-Off

Choke-

Run

Traction

Control

Auger

Control

Discharge

Chute

Deflector

Heated

Hand

Grips

Forward

Neutral

Reverse

Engine

Primer

STOP

Engine

Run

Engine

Stop

Wheel

Lock

www.murray.com4

12

Free-Hand™ Control

Easy-Turn™ Traction Control

Not for

Reproduction

The safety alert symbol and signal word (DANGER,

WARNING, CAUTION, or NOTICE) is used to indicate the likelihood

and potential severity of personal injury and/or damage to the

product. In addition, a hazard symbol may be used to represent the

type of hazard.

Safety Alert Symbol and Signal Words

DANGER indicates a hazard which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazard which, if not avoided, could

result in death or serious injury.

CAUTION indicates a hazard which, if not avoided, could

result in minor or moderate injury.

NOTICE indicates a situation that could result in damage

to the product.

DANGER

• Hand contact with the rotating impeller inside the discharge

chute is the most common cause of injury associated with

snowthrowers.

• This snowthrower is capable of amputating hands and feet,

and throwing objects. Read and observe all the safety

instructions in this manual. Failure to do so will result in

death or serious injury.

WARNING

Certain components in this product and its related accessories

contain chemicals known to the state of California to cause

cancer, birth defects, or other reproductive harm. Wash hands

after handling.

WARNING

The engine exhaust from this product contains chemicals

known to the State of California to cause cancer, birth defects,

or other reproductive harm.

• Be thoroughly familiar with the controls and the proper use of the

snow thrower.

• Make sure you are properly trained before operating the

snowthrower.

• Know how to stop the unit and disengage the controls quickly.

• Never allow anyone to operate the snowthrower without proper

instruction.

• Always follow the instructions in the operator’s manual, if the

snowthrower will be stored for an extende d period.

• Maintain or replace safety and instruction labels as necessary.

• Never attempt to make major repairs on the snowthrower unless

you have been properly trained. Improper servicing of the

snowthrower can result in hazardous operation, equipment

damage, and voiding of the product warranty.

DANGER

Read, understand, and follow all the

instructions on the snowthrower and in the

operator’s manual before operating this unit.

Failure to observe the safet y instructions in

this manual will result in death or serious

injury.

Read the Manual

TO SAFELY CLEAR A CLOGGED DISCHARGE CHUTE

DANGER: Hand contact with the rotating impeller inside

the discharge chute is the most common cause of

injury associated with snow throwers. Never use your

hands to clean out the discharge chute.

FOLLOW THESE INSTRUCTIONS:

1. Shut OFF the engine.

2. Wait 10 seconds to be sure the impeller blades have stopped

rotating.

3. Always use a clean-out tool, not your hands.

DANGER

Discharge chute contains rotating impeller to

throw snow. Never clear or unclog the

discharge chute with your hands. Fingers can

quickly become caught in the impeller. Always

use a clean-out tool.

Failure to observe these safety instructions

will result in traumatic amputation or severe

laceration.

Discharge Chute

OPERATOR SAFETY

en

5

Not for

Reproduction

WHEN ADDING FUEL

• Turn off engine and let cool at least 3 minutes before removing

the fuel cap and adding fuel.

• Fill fuel tank outdoors or in a well ventilated area.

• Do not overfill the fuel tank. To allow for the expansion of gasoline,

do not fill above the bottom of the fuel tank neck.

• Keep fuel away from sparks, open flames, pilot lights, heat, and

other ignition sources.

• Check fuel lines, cap, and fittings frequently for cracks or leaks.

Replace if necessary.

• Use an approved fuel container.

• If fuel spills, wait until it evaporates before starting engine.

WHEN STARTING ENGINE

• Ensure that spark plug, muffler, fuel cap, and air cleaner (if

equipped) are in place and secured.

• Do not crank the engine with the spark plug removed.

• If fuel is spilled, do not attempt to start the engine, but move the

snow thrower away from the area of the spill, and avoid creating

any source of ignition, until the fuel vapors have dissipated.

• Do not over-prime the engine. Follow the engine starting

instructions in this manual.

• If the engine floods, set choke (if equipped) to OPEN/RUN

position, move throttle (if equipped) to FAST position and crank

until engine starts.

WHEN OPERATING EQUIPMENT

• Do not tip the snowthrower at an angle which causes the fuel to

spill.

• Do not choke the carburetor to stop the engine.

• Never run the engine with the air cleaner assembly (if equipped)

or the air filter (if equipped) removed.

WHEN CHANGING OIL

• If you drain the oil from the top oil fill tube, the fuel tank must be

empty or fuel can leak out and result in a fire or explosion.

WHEN TRANSPORTING EQUIPMENT

• Transport with fuel tank EMPTY, or with fuel shut-off valve OFF.

WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL

IN TANK

• Store away from furnaces, stoves, water heaters, or other

appliances that have pilot light or other ignition source because

they can ignite fuel vapors.

DANGER

Fuel and its vapors are extremely flammable

and explosive. Always handle fuel with extreme

care.

Failure to observe these safety instructions can

cause a fire or explosion which will result in

severe burns or death.

Fuel Handling

• Keep the area of operation clear of all persons, particularly small

children and pets.

• Thoroughly inspect the area where the snowthrower will be used

and remove all doormats, sleds, boards, wires, and other foreign

objects.

• Do not operate the snowthrower without wearing adequate winter

clothing.

• Wear footwear that will improve footing on slippery surfaces.

• Use caution to avoid slipping or falling especially when operating

the snowthrower in reverse.

• Never operate the snowthrower without good visibility or light.

Always be sure of your footing, and keep a firm hold on the

handles.

• Do not clear snow across the face of slopes. Use extreme caution

when changing direction on slopes. Do not attempt to clear steep

slopes.

• Do not overload the machine capacity by attempting to clear

snow too quickly.

• Never operate the snowthrower at high transport speeds on

slippery surfaces. Look behind the snowthrower and use care

when operating in reverse.

• Do not use the snowthrower on surfaces above ground level such

as roofs of residences, garages, porches, or other such structures

or buildings.

• Operators should evaluate their ability to operate the snowthrower

safely enough to protect themselves and others from injury.

• The snowthrower is intended to remove snow only. Do not use the

snow thrower for any other purpose.

• Do not carry passengers.

• After striking a foreign object, shut OFF the engine, disconnect

the cord on electric motors, thoroughly inspect the snowthrower

for any damage, and repair the damage before restarting and

operating the snowthrower.

• If the snowthrower vibrates abnormally, shut OFF the engine.

Vibration is generally a warning of trouble. See an authorized

dealer if necessary for repairs.

• For models equipped with electric starting motors, disconnect the

power cord after the engine starts.

DANGER

This snowthrower is only as safe as the

operator. If it is misused, or not properly

maintained, it can be dangerous. Remember

you are responsible for your safety and that of

those around you.

Operation and Equipment Safety

www.murray.com

OPERATOR SAFETY

6

Not for

Reproduction

• Keep children out of the area during operation. Children are often

attracted to the equipment. Be mindful of all persons present.

• Be alert and turn unit off if children enter the area.

• Never allow children to operate the unit.

• Use extra care when approaching blind corners, shrubs, trees, or

other objects that may obscure vision. Children may be present.

DANGER

Tragic accidents can occur if the operator is

not alert to the presence of children. Children

are often attracted to the unit and the

operating activity. Never assume that children

will remain where you last saw them.

Children

• Start and run engine outdoors.

• Do not run the engine in an enclosed area, even if doors or

windows are open.

DANGER

Engines give off carbon monoxide, an odorless,

colorless, poison gas.

Breathing carbon monoxide can cause nausea,

fainting, or death.

Engine Safety

• Disengage all controls and shift into neutral before starting the

engine.

• Let the engine adjust to outdoor temperatures before starting to

clear snow.

• Use a grounded three-wire plug-in for all snowthrowers equipped

with electric drive motors or electric starting motors.

DANGER

Safe operation of the snowthrower requires the

proper care and maintenance of the engine.

Failure to observe the safety instructions in this

manual will result in death or serious injury.

• Always wear safety glasses or eye shields during operation, and

while performing an adjustment or repair.

• Always be aware of the direction the snow is being thrown.

Nearby pedestrians, pets, or property may be harmed by objects

being thrown.

• Be aware of your environment while operating the snowthrower.

Don’t run over items such as gravel, doormats, newspapers, toys,

and rocks hidden under snow, as they can all be thrown from the

chute or jam in the auger.

• Use extreme caution when operating on or crossing gravel drives,

walks, or roads.

• Adjust the collector housing height to clear gravel or crushed rock

surface.

• Never operate the snowthrower near glass enclosures,

automobiles, window wells, drop-offs, and the like without proper

adjustment of the discharge chute angle.

• Familiarize yourself with the area in which you plan to operate the

snow thrower. Mark off boundaries of walkways and driveways.

DANGER

Objects can be picked up by auger and thrown

from chute. Never discharge snow toward

bystanders or allow anyone in front of the

snowthrower. Failure to observe these safety

instructions will result in death or serious

injury.

Thrown Objects

• Whenever cleaning, repairing, or inspecting the snowthrower,

make sure the engine is OFF, spark plug wire is disconnected,

and all moving parts have stopped.

• Do not put hands or feet near or under rotating parts. Keep clear

of the discharge opening at all times.

• Never operate the snowthrower without proper guards, and other

safety devices in place and working.

• Never leave the snowthrower unattended while engine is running.

Always disengage the auger and traction controls, stop engine,

and remove keys.

• Keep all loose clothing away from the front of the snowthrower

and auger. Scarves, mittens, dangling drawstrings, loose clothes,

and pants can quickly become caught in the rotating device and

amputation will occur. Tie up long hair and remove jewelry.

• Run the machine a few minutes after discharging snow to prevent

freeze-up of the collector/impeller.

• Disengage power to the collector/impeller when snowthrower is

transported or not in use.

DANGER

Keep hands, feet, and clothing away from

rotating parts. Rotating parts can contact or

entangle hands, feet, hair, clothing, or

accessories.

Failure to observe these safety instructions will

result in traumatic amputation or severe

laceration.

Moving Parts

OPERATOR SAFETY

en

7

Not for

Reproduction

• When performing any maintenance or repairs on the

snowthrower, shut OFF the engine, disconnect spark plug wire,

and keep the wire away from the plug to prevent someone from

accidently starting the engine.

• Check shear bolts and other hardware at frequent intervals for

proper tightness to be sure the snowthrower is in safe working

condition.

• Keep nuts and bolts tight and keep snowthrower in good

condition.

• Never tamper with safety devices. Check their proper operation

regularly and make necessary repairs if they are not functioning

properly.

• Components are subject to wear, damage, and deterioration.

Frequently check components and replace with recommended

parts, when necessary.

• Check control operation frequently. Adjust and service as

required.

• Use only factory authorized replacement parts or like parts when

making repairs.

• Always comply with factory specifications on all settings and

adjustments.

• Only authorized service locations should be utilized for major

service and repair requirements.

• Use only attachments and accessories approved by the factory

(such as wheel weights, counterweights, or cabs).

• Never attempt to make any adjustments while the engine is

running (except when specifically recommended by the factory).

WARNING

This snowthrower must be properly maintained

to ensure safe operation and performance.

Failure to observe the safety instructions in this

manual could result in death or serious injury.

Maintenance and Storage

• If there is natural or LP gas leakage in area, do not start engine.

• Do not use pressurized starting fluids because vapors are

flammable.

WARNING

Starting engine creates sparking.

Sparking can ignite nearby flammable gases.

Explosion and fire could result.

• Never touch a hot engine or muffler. Allow muffler, engine

cylinder, and fins to cool before touching.

• Remove debris from muffler area and cylinder area.

• Install and maintain in working order a spark arrester before using

equipment on forest-covered, grass-covered, or brush-covered

unimproved land.

• It is a violation of California Public Resource Code, Section 4442,

to use or operate the engine on any forest-covered, brush-

covered, or grass-covered land unless the exhaust system is

equipped with a spark arrester, as defined in Section 4442,

maintained in effective working order. Other states or federal

jurisdictions may have similar laws. Contact the original

equipment manufacturer, retailer, or dealer to obtain a spark

arrester designed for the exhaust system installed on this engine.

WARNING

Running the engine produces heat. Engine

parts, especially muffler, become extremely hot.

Failure to observe these safety instructions

could result in severe thermal burns on contact.

Engine Safety (Continued)

OPERATOR SAFETY

DANGER: READ OPERATOR’S

MANUAL.

Read the Operator’s Manual for

operating and safety instructions.

DANGER: THROWN OBJECTS

HAZARD.

Never direct discharge chute towards

persons or property. Keep bystanders

away.

DANGER: REMOVE KEY BEFORE

SERVICING.

Shut off engine and remove key before

performing maintenance or repair work.

DANGER: AMPUTATION HAZARD.

Contact with auger will cause serious

injury. Keep hands, feet, and clothing

away. Keep bystanders away.

DANGER: AMPUTATION HAZARD.

Contact with moving parts inside chute

will cause serious injury. Shut off engine

before unclogging discharge chute. Use

clean-out tool, not hands!

SAFETY ICONS

www.murray.com8

Not for

Reproduction

en

9

Safety Decals Figure 1

WARNING: If any safety decals become worn or

damaged and cannot be read, order replacement

decals from your local dealer.

Look for this symbol to indicate important safety

precautions. This symbol indicates: “Attention!

Become Alert! Your Safety Is At Risk.”

Before operating your snowthrower, read the safety decals as

shown on your snowthrower. The cautions and warnings are

for your safety. To avoid a personal injury or damage to your

snowthrower, understand and follow all the safety decals.

OPERATOR SAFETY

Part No. 1727207

Chute Danger Decal

Part No. 1737872

Shift Decal

Part No. 1737867

Auger Danger Decal

Product ID Number &

Serial Number Decal

Rear of Motor Box

Part No. 278297

Engine Decal

Part No. 1737869

Auger Control Decal Part No. 1737870

Traction Control Decal

Not for

Reproduction

A

B

C

DE

F

G

A

B

C

ASSEMBLY

WARNING: Always wear safety glasses or eye shields

when assembling the snowthrower.

UNPACK THE SNOWTHROWER

1. Using knife, cut along the dotted lines around the top of the

carton. Then remove top of carton as shown in Figure 2.

2. Using knife, cut along the dotted lines around the bottom of

the carton.

3. Push snowthrower off the bottom of the carton to proceed with

assembly.

ASSEMBLE THE HANDLES AND CHUTE CRANK

1. Loosen, but do not remove the bolts (A, Figure 3) flat washers

(B), lock washers (C) and hex nuts (D) in the upper holes of

the lower handle (E).

2. Remove the fasteners and the crank assembly eyebolt (F)

from the lower holes of the lower handle.

3. Raise upper handle (G) into operating position. Upper handle

should be to the outside of the lower handle.

NOTE: Make sure the cables are not caught between the

upper and lower handle.

4. Replace the fasteners and the crank assembly eyebolt. DO

NOT tighten until all fasteners are in place.

5. Attach the crank rod (A, Figure 4) to the universal joint

assembly (B) with the hair pin (C).

6. Replace and tighten nut on crank assembly eyebolt (F, Figure

3). Make sure eyebolt is properly aligned and the crank can

freely rotate.

7. Tighten all handle bolts.

NOTE: Make sure crank does not touch carburetor cover.

Unpack the Snowthrowerr Figure 2

Assemble the Handles Figure 3

Assemble the Chute Crank Figure 4

TOOLS REQUIRED FOR ASSEMBLY

1–Knife

2 – 1/2" Wrenches (or adjustable wrenches)

1 – 7/16" Wrenches (or adjustable wrenches)

1 – Wrench (or adjustable wrench)

1 – Pair pliers or screw driver (to spread cotter pin)

1 – Hammer

1–Pry Bar

PARTS BAG CONTENTS

1 – Shear Bolt Kit, 1/4-20 x 1-3/4 in.

1 – Bag of Shear Bolts

1 – Screw, 1/4-20 x 1-3/4 in.

1 – Spacer, Sleeve, 1/4 in.

1 – Locknut, Hex 1/4-20

1 – Grip, Lever, 3/8-16

1 – Nut, Hex Jam, 3/8-16

1 – Screw, 3/8-16 x 2 in.

1 – Nut, Hex 3/8-16

1 – Washer, 3/8 in.

1–Washer, Flat

4 – Screw, 1/4-20 x 3/4 in.

4 – Nut, Hex Nylock Flange, 1/4-20

www.murray.com10

Not for

Reproduction

ASSEMBLY

CHECK THE CABLE CONNECTION

The traction control cable (A, Figure 5) and auger control cable

(B) are adjusted at the factory and no adjustment should be

necessary.

If the cables become stretched, unattached or begin to sag,

adjustment will be necessary. See the Maintenance section of

this manual.

B

A

Check the Cable Connection Figure 5

ASSEMBLE THE SPEED SELECT LEVER

1. Cut plastic tie (A, Figure 6) securing speed select lever

assembly (B) to the shifter bracket (C).

2. Remove locknut (A, Figure 7), washer (B), spring (C), and

bolt (D).

NOTE: View is from right side of unit standing in

operator’s position.

3. Position speed selector lever assembly as shown in Figure 8.

4. Reinstall bolt (D, Figure 7), spring (C), washer (B) and locknut

(A).

5. Tighten locknut until 1/8 to 3/16 inch of the bolt threads

protrude past the locknut.

6. Thread the 3/8-16" hex jam nut (E) onto the lever (F) until the

nut reaches the end of the thread.

Control Panel and Shifter Bracket Figure 8

Control Panel

Shifter Bracket

Shift Lever and Bracket Figure 6

Shifter Handle Figure 7

C

A

B

A B

C

1/8 to 3/8 inch of

exposted thread

D

G

E

F

7. Thread the plastic knob (G) as far as possible and ensure that

the knob points forward.

8. Tighten the 3/8-16" hex jam nut against the knob securely.

9. Move shifter through all speeds to ensure proper tension of

the spring. If shifter lever sticks in any of the notches, loosen

locknut 1/2 turn at a time until shifter lever moves more freely.

Control Panel

Shifter Bracket

en

11

Not for

Reproduction

CHECK THE TIRES

Check tires for damage. Check the air pressure in the tires with an

accurate gauge. See the sidewall of the tire for the proper

inflation.

CAUTION: Avoid Injury! Explosive separation of tire and

rim parts is possible when they are serviced

incorrectly.

• Do not attempt to mount a tire without the proper

equipment and experience to perform the job.

• Do not inflate the tires above the recommended

pressure.

• Do not weld or heat a wheel and tire assembly. Heat can

cause an increase in air pressure resulting in an

explosion. Welding can structurally weaken or deform the

wheel.

• Do not stand in front or over the tire assembly when

inflating. Use appropriate tool that allows you to stand to

one side.

NOTICE: Check side of tire for maximum tire pressure. DO

NOT exceed maximum.

INSTALL THE DISCHARGE CHUTE

NOTE: The chute ring assembly (A, Figure 9) comes

installed on the unit from the factory.

1. Install discharge chute assembly (B) using four screws (C)

and nuts (D).

NOTE: Make sure the slot in the chute ring aligns with the

arrow on the outer ring as shown.

2. Tighten screws (C) snugly but be careful not to over-tighten.

A

D

C

B

Install the Discharge Chute Figure 9

ASSEMBLE THE HEADLIGHT

The headlight is mounted on the right side of the upper handle. It

is installed upside-down for shipping purposes.

1. Remove the nut (A, Figure 10) and lockwasher (B) from the

carriage bolt (C).

2. Turn the headlight (D) to the top side of the upper handle (E).

Ensure external tooth lockwasher (F) and saddle washer (G)

are in place as shown in Figure 10.

3. Install the nut and lockwasher to secure the headlight to the

handle. The headlight should point toward the snow clearing

path.

Assemble the Headlight Figure 10

D

C

E

G

F

B

A

ASSEMBLY

www.murray.com12

Not for

Reproduction

FEATURES AND CONTROLS

C. Chute Rotation Crank — Used to rotate the discharge chute

to the left or right.

D. Deflector Control Wing Nut — Used to control the angle of

the chute deflector (up or down).

E. Traction Control Lever — Used to propel snowthrower for-

ward or reverse. Push down to engage, release to disengage.

F. Clean-Out Tool — Used to remove snow and debris from the

discharge chute and the auger housing.

G. Skid Shoe — Used to adjust the ground clearance of the

auger housing.

Snowthrower Controls Figure 11

B

C

E

G

D

SNOWTHROWER CONTROLS

A. Speed Select Lever — Allows the operator to use one of six

(6) forward and two (2) reverse speeds (see Figure 11). To

shift, move speed select lever to desired position.

NOTICE: Do not move speed select lever while Traction

Control is engaged. This may result in severe damage

to the drive system.

B. Auger Control Lever — Used to engage and disengage the

auger and impeller. To engage push down, to disengage re-

lease.

A

F

en

13

Not for

Reproduction

ENGINE CONTROLS

A. Choke Control Knob — Used to start a cold engine (see

Figure 12).

B. Electric Start Button — Used to start the engine using the

electric starter.

C. Primer Button — Used to inject fuel directly into the carbure-

tor manifold to ensure fast starts in cool weather.

D. Safety Key — Must be inserted to start engine. Pull out to

stop. Do not turn safety key.

E. Starter Cord Handle — Used to start the engine manually.

Engine Controls Figure 12

F. ON/OFF Switch (if equipped) — Used to start and stop the

engine.

G. Fuel Tank and Cap — Fill the fuel tank to approximately

1-1/2 in. (38 mm) below the top of the neck to allow for fuel

expansion.

H . Oil Fill Cap (Extended Dipstick)

I. Fuel Shut-Off Valve — Used to turn the fuel supply off for

out-of-season storage.

FEATURES AND CONTROLS

C

H

A

F

E

B

G

STOP

D

I

www.murray.com14

Not for

Reproduction

OPERATE THE SNOWTHROWER

CAUTION: Operation with a Snow Cab. Wind may blow

exhaust gasses back towards the operator. If you notice

the smell of exhaust, change direction of operation.

NOTE: Always release the traction control lever before mov-

ing the speed select lever.

WARNING: The operation of any snowthrower can result in foreign objects being thrown into the eyes, which can

result in severe eye damage. Always wear safety glasses or eye shields before beginning snowthrower operation.

We recommend standard safety glasses or Wide Vision Safety Mask over spectacles.

NOTICE: Do not throw snow toward a building as hidden ob-

jects could be thrown with sufficient force to cause dam-

age.

1. Start the engine. See “Start the Engine” in this section.

2. Rotate the crank (C, Figure 11) to set the direction (left or

right) of the discharge chute.

3. Loosen the wing nut on the side of the discharge chute to set

the angle (up or down) the snow is thrown. Raise the chute

deflector for more distance, or lower for less distance. Tighten

wing nut.

4. Fully press and hold the auger control lever (A, Figure 13) to

engage the auger rotation.

5. Fully press and hold the traction control lever (B) to engage

the traction drive and begin moving the snowthrower. To dis-

engage the traction drive, completely release the lever.

BEFORE OPERATING SNOWTHROWER

■

Check the fasteners. Make sure all fasteners are tight.

■

Read this OPERATOR’S MANUAL before operating your

snowthrower. Compare the illustrations with your

SNOWTHROWER to familiarize yourself with the location of vari-

ous controls and adjustments. Save this manual for future refer-

ence.

NOTE: This snowthrower was shipped WITH OIL in the engine.

See “Before Starting Engine” instructions in the OPERATION

section of this manual before starting engine.

Operating the Control Levers Figure 13

OPERATION

DANGER: The discharge chute contains a rotating

impeller to throw snow. Never clear or unclog the

discharge chute with your hands. Fingers can quickly

become caught and traumatic amputation or severe

laceration will result. Always use a clean-out tool to

clear or unclog the discharge chute.

SNOWTHROWER SAFETY TESTS

Test 1 - Auger/Impeller

• Release auger control (right-hand).

• Auger/impeller stops in less than 5 seconds.

Test 2 - Traction Drive

• Release traction control (left-hand).

• Snowthrower forward/reverse motion stops.

Test 3 - Free-Hand Control (if equipped)

• Engage auger control and traction control.

• Release auger control immediately followed by the traction

control (a) stops auger/impeller in less than 5 seconds, and (b)

stops forward/reverse motion of snowthrower.

WARNING:

• Hand contact with the rotating impeller inside the

discharge chute is the most common cause of injury

associated with snowthrowers.

• This snowthrower is capable of amputating hands

and feet, and throwing objects. Read and observe all

the safety instructions in this manual. Failure to do so

will result in death or serious injury.

BA

en

15

Not for

Reproduction

STOP THE SNOWTHROWER

1. Release the auger control lever (A, Figure 13).

2. Release the traction control lever (B).

3. Push the ON/OFF switch (A, Figure 21), if equipped, to the

OFF position and pull out the safety key (B).

7. To stop moving forward, release the traction control lever (B).

8. To move the snowthrower backwards, move the speed select

lever into either first or second reverse position and engage

the traction control lever.

Moving Forward and Backward Figure 14

A

6. Use the speed select lever (A, Figure 14) to select the forward

drive speed. Set the speed select lever to one of the following

positions as determined by snow conditions:

1-2 Wet, Heavy, Slushy, Extra Deep

3 Moderate

4-5 Very Light

6 Transport

NOTE: When clearing wet, heavy, snow, it is recommended

that the ground speed of the unit be reduced, maintained

full throttle and do not attempt to clear the full width of the

unit.

OPERATION

WARNING: Never run engine indoors or in an

enclosed, poorly ventilated area. Engine exhaust

contains CARBON MONOXIDE, an ODORLESS and

DEADLY GAS.

• Keep hands, feet, hair, and loose clothing away from any

moving parts on engine and snowthrower.

• Temperature of muffler and nearby areas can exceed 150°F

(66°C). Avoid these areas.

• DO NOT allow children or young teenagers to operate or

be near snowthrower while it is operating.

TRACTION LOCK PIN

The right traction wheel can be completely released using the

locking pin (A, Figure 15). This allows the unit to be easily moved

with the engine off.

Traction Lock Pin Figure 15

A

WARNING: Read Operator’s Manual before operating

machine. This machine can be dangerous if used

carelessly.

• Never operate the snowthrower without all guards, covers,

and shields in place.

• Never direct discharge towards windows or allow

bystanders near machine while engine is running.

• Stop the engine whenever leaving the operating position.

• Disconnect spark plug before unclogging the impeller

housing or the discharge chute and before making repairs

or adjustments.

• When leaving the machine, remove the safety key. To

reduce the risk of fire, keep the machine clean and free

from spilled gas, oil, and debris.

www.murray.com16

Not for

Reproduction

CHECK THE OIL (BEFORE STARTING ENGINE)

NOTE: The engine was shipped from the factory filled with

oil. Check the level of the oil. Add oil as needed.

1. Make sure the unit is level. Use a high quality detergent oil

classified “For Service SG, SH, SJ, SL, or higher”.

2. Remove the oil fill cap/dipstick (A, Figure 16) and wipe with a

clean cloth.

3. Insert the oil fill cap/dipstick and turn clockwise to tighten.

4. Remove the oil fill cap/dipstick and check the oil.

NOTE: Do not check the level of the oil while the engine

runs.

5. If necessary, add oil until the oil reaches the FULL mark on the

oil fill cap/dipstick. Do not add too much oil.

6. Tighten the oil fill cap/dipstick securely each time you check

the oil level.

NOTE: Synthetic 5W30 motor oil is acceptable for all

temperatures. DO NOT mix oil with gasoline. See Chart for

oil recommendations.

Checking the Oil Figure 16

* Below 40°F (4°C) the use of SAE 30 will result in hard starting.

** Above 80°F (27°C) the use of 10W-30 may cause increased oil

consumption. Check oil level more frequently.

FULL

A

FULL

OPERATION

ADDING FUEL

1. Clean the fuel cap area of dirt and debris. Remove the fuel

cap (G, Figure 12).

2. Fill the fuel tank with fuel. To allow for expansion of the fuel,

do not fill above the bottom of the fuel tank neck.

3. Reinstall the fuel cap.

WARNING:

Fuel and its vapors are extremely flammable and

explosive.

Fire or explosion can cause severe burns or death.

When Adding Fuel

• Turn engine off and let engine cool at least 3 minutes before

removing the fuel cap.

• Fill fuel tank outdoors or in well-ventilated area.

• Do not overfill fuel tank. To allow for expansion of the fuel, do not

fill above the bottom of the fuel tank neck.

• Keep fuel away from sparks, open flames, pilot lights, heat, and

other ignition sources.

• Check fuel lines, tank, cap, and fittings frequently for cracks or

leaks. Replace if necessary.

• If fuel spills, wait until it evaporates before starting engine.

en

17

Not for

Reproduction

FUEL RECOMMENDATIONS

Fuel must meet these requirements:

• Clean, fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKI (91 RON). High altitude use,

see below.

• Gasoline with up to 10% ethanol (gasohol) or up to 15% MTBE

(methyl tertiary butyl ether) is acceptable.

NOTICE: Do not use unapproved gasolines, such as E85. Do

not mix oil in gasoline or modify the engine to run on

alternate fuels. This will damage the engine components

and void the engine warranty.

To protect the fuel system from gum formation, mix a fuel stabilizer

into the fuel. All fuel is not the same. If starting or performance

problems occur, change fuel providers or change brands. This

engine is certified to operate on gasoline. The emissions control

system for this engine is EM (Engine Modifications).

High Altitude

At altitudes over 5,000 feet (1524 meters), a minimum

85 octane/85 AKI (89 RON) gasoline is acceptable. To remain

emissions compliant, high altitude adjustment is required.

Operation without this adjustment will cause decreased

performance, increased fuel consumption, and increased

emissions. See a Briggs & Stratton Authorized Dealer for high

altitude adjustment information.

Operation of the engine at altitudes below 2,500 feet (762 meters)

with the high altitude kit is not recommended.

OPERATION

Start the engine as follows:

1. Check the oil level.

2. Make sure equipment drive controls are disengaged.

3. Push the ON/OFF switch (A, Figure 17), if equipped, to the ON

position.

START THE ENGINE

Be sure that engine oil is at FULL mark on the oil fill cap/dipstick.

The snowthrower engine is equipped with an AC electric starter

and recoil starter. Before starting the engine, be certain that you

have read the following information.

If engine floods, set the choke to the OPEN/RUN position and

crank until the engine starts.

WARNING: The electric starter is equipped with a three-

wire power cord and plug designed to operate on AC

household current. The power cord must be properly

grounded at all times to avoid the possibility of electric shock

which can cause injury to the operator. Follow all instructions

carefully as set forth:

Make sure your house has a three-wire grounded system.

If you are not sure, ask a licensed electrician. If your house

does not have a three-wire grounded system, do not use this

electric starter under any condition.

If your house has a three-wire grounded system but a three-

hole receptacle is not available to connect the electric starter,

have a three-hole receptacle installed by a licensed electrician.

WARNING: To connect power cord, always connect the

power cord first to the switch box located on the

engine and then plug the other end into a three-hole

grounded receptacle.

WARNING: To disconnect the power cord, always

unplug the end connected to the three-hole grounded

receptacle first.

Starting Engine Figure 17

A

www.murray.com18

Not for

Reproduction

OPERATION

Starting with Electric Start Figure 20

IMPORTANT: To extend the life of the starter, use short

starting cycles (five seconds maximum). Wait one

minute between starting cycles.

NOTE: If the engine does not start after three attempts, see

an authorized dealer.

Starting with Cord Handle Figure 19

A

B

9. Electric Start: Depress the starter push button (A, Figure 20).

After you start the engine, first disconnect the extension cord from

the wall receptacle and then from the power cord receptacle (B).

A

4. Insert the safety key (A, Figure 18) into the safety key slot and

push fully in to the RUN position.

5. Turn the choke knob (B) fully clockwise if engine is cold.

NOTE: Do not use the choke to start a warm engine.

6. Push the primer button (C) two times.

NOTE: Do not use the primer to start a warm engine.

NOTE: Ensure that electric extension cord is removed from

the power receptacle.

A

B

C

Inserting Safety Key Figure 18

7. Rewind Start: Firmly hold the starter cord handle (A, Figure

19). Pull the starter cord handle slowly until resistance is felt,

then pull rapidly.

WARNING: Rapid retraction of the starter cord (kickback)

will pull your hand and arm toward the engine faster

than you can let go. Broken bones, fractures, bruises,

or sprains could result. When starting engine, pull the

starter cord slowly until resistance is felt and then pull

rapidly to avoid kickback.

NOTE: If the engine does not start after three attempts, see

an authorized dealer.

8. Electric Start: First connect the extension cord to the power

cord receptacle and then into a wall receptacle. If additional ex-

tension cord is required, make sure it is three-wire.

WARNING: If the extension cord is damaged, it must

be replaced by the manufacturer (or its service agent)

or a similarly qualified person to avoid a hazard.

en

19

Not for

Reproduction

OPERATION

CLEAR A CLOGGED DISCHARGE CHUTE

DANGER: Hand contact with the rotating impeller inside

the discharge chute is the most common cause of injury

associated with snowthrowers. Never clear or unclog

discharge chute with your hands, or while engine is

running. Fingers can quickly become caught and

traumatic amputation or severe laceration can result.

OPERATING TIPS

1. Most efficient snowthrowing is accomplished when snow is

removed immediately after it falls.

2. For complete snow removal, slightly overlap each swath

previously taken.

3. Snow should be discharged downwind whenever possible.

4. For normal usage, set the skids 1/8 inch (3 mm) below the

scraper bar. For extremely hard-packed snow surfaces, the

skids may be adjusted upward to ensure cleaning efficiency.

5. On gravel or crushed rock surfaces, the skids should be set at

1-1/4 inch (32 mm) below the scraper bar (see Adjust Skid

Height in the Maintenance section of this manual). Rocks

and gravel must not be picked up and thrown by the machine.

6. After the snowthrowing job has been completed, allow the

engine to idle for a few minutes, to melt snow and ice

accumulated on the engine.

7. Clean the snowthrower thoroughly after each use.

8. Remove ice and snow accumulation and all debris from the

entire snowthrower, and flush with water (if possible) to remove

all salt or other chemicals. Wipe snowthrower dry.

9. Before starting snowthrower, always inspect augers and

impeller for ice accumulation and/or debris, which could result

in snowthrower damage.

10. Check oil level before every start. Make sure the oil is at the

FULL mark on the oil fill cap/dipstick.

Clean-Out Tool Figure 22

A

• SHUT OFF THE ENGINE!

• Wait 10 seconds to be sure that the impeller blades have

stopped rotating.

• Always use a clean-out tool, not your hands.

A clean-out tool (A, Figure 22) is attached to either the handle or

the top of the auger housing. Use the clean-out tool to remove

snow from the auger housing.

STOP THE ENGINE

Before stopping the engine, idle for a few minutes to help dry off

any moisture on the engine.

WARNING: Gasoline and vapors are extremely

flammable and explosive. Fire or explosion can cause

severe burns or death. DO NOT choke the carburetor to

stop the engine.

1. Push the ON/OFF switch (A, Figure 21), if equipped, to the

OFF position.

2. Remove the safety key (B). Keep the safety key out of the

reach of children. Stopping Engine Figure 21

NOTE: Do not lose the safety key. Keep the safety key in a

safe place. The engine will not start without the

safety/ignition key.

A

B

www.murray.com20

Not for

Reproduction

Страница загружается ...

Simplicity CHAMPION DUAL STAGE SNOWTHROWER CE, MF 14.5TP 30" (76,2) Руководство пользователя

Simplicity CHAMPION DUAL STAGE SNOWTHROWER CE, MF 14.5TP 30" (76,2) Руководство пользователя

на других языках