Yamaha DDK-7 Инструкция по применению

Owner’s Manual

DDK

-

7

v1.1

EN

(1)B-11 1/2

2

DDK-7 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Use only the supplied power cord/plug.

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on

it, or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden

loss of sound during use of the instrument, or if any unusual smells or smoke

should appear to be caused by it, immediately turn off the power switch,

disconnect the electric plug from the outlet, and have the instrument inspected

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used

for extended periods of time, or during electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disﬁguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still ﬂowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/Power cord Location

(1)B-11 2/2

3

DDK-7 Owner’s Manual

• Do not place the instrument against a wall (allow at least 3 cm/one-inch from

the wall), since this can cause inadequate air circulation, and possibly result in

the instrument overheating.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all

components, set all volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually raise the volume

controls while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Saving and backing up your data

• Always save data to a USB ﬂash memory or other external media, in order to

help prevent the loss of important data due to a malfunction or user operating

error.

Backing up the external media

•To protect against data loss through media damage, we recommend that you

save your important data onto two external media.

Yamaha cannot be held responsible for damage caused by improper use or

modiﬁcations to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Connections

Maintenance

Handling caution

Saving data

The name plate of this product may be found on the bottom of the unit.

The serial number of this product may be found on or near the name

plate. You should note this serial number in the space provided below

and retain this manual as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

(bottom)

DDK-7 Owner’s Manual

4

Accessories

• Owner’s Manual

•Power cord

Congratulations!

You are the proud owner of a ﬁne electronic keyboard, the DDK-7.

The Yamaha DDK-7 combines the most advanced tone generation technology with state-of-the-art

digital electronics and features to give you stunning sound quality with maximum musical

versatility.

In order to make the most of your DDK-7 and its extensive performance potential, we urge you to

read the manual thoroughly while trying out the various features described.

Keep the manual in a safe place for later reference.

DDK-7 Owner’s Manual

5

Main Features

Wide Variety of Registration Menus page 21

The Registration Menu buttons feature a total of 288 Registrations, allowing you to instantly set up the

DDK-7 for playing your favorite type of music. The Registrations in Registration Menu are divided into six

basic categories for ease of selection. Moreover, you can edit any of the Registrations and customize them to ﬁt

your own performance needs.

Richly textured, four-layer AWM Voices and High Quality Digital

Effects

pages 25

and 53

The DDK-7 contains a huge amount of exceptionally high-quality Voices – 415 altogether – created with the

AWM (Advanced Wave Memory) tone generation system. The authentic touch response keyboard lets you

play these Voices with all the expressiveness and control of an actual acoustic instrument. What’s more, there

are 183 different effect types in 15 categories that you can apply to each Voice section —letting you enhance

and even completely change the character of the Voices, without having to use the Voice Edit features.

Dynamic, Contemporary Rhythms and Auto Accompaniment page 61

The exceptionally of wide selection of 274 rhythms lets you choose exactly the rhythm you need in your

performance. Each rhythm contains 15 variations (sections) – such as Main, Fill In, Intro, Ending, and Break

– that you can easily switch while you play, to make your performance even more dynamic and professional.

Each rhythm has its own matching accompaniment divided into ﬁve instrument parts, providing basic

backing as well as embellishments.

Comprehensive input and output connectors ideal for live

performance

page 215

Since the DDK-7 is equipped with two types of AUX OUT jacks: MAIN and SUB, you can select outputs for

each part. This lets you add an external effect to a speciﬁc part, or adjust the volume balance among the parts

with an external mixer—allowing you to build up your own system and create just the sound you want.

Large, 6.5-inch TFT-LCD with Intuitive Touch Panel Operation page 13

This large LCD display not only lets you clearly see a wide selection of settings and parameters at almost any

angle, it also serves as a touch control panel — letting you intuitively make selections and adjust settings

simply by touching the screen! Once you touch a setting, you can even adjust it in ﬁner detail if necessary with

the Data Control dial.

DDK-7 Owner’s Manual

6

• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or

with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without

limitation, all computer software, styles ﬁles, MIDI ﬁles, WAVE data and sound recordings. Any unauthorized

use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except

for your personal use.

•Electone and STAGEA are the trademarks of Yamaha Corporation.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of

their respective companies.

• The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may

appear somewhat different from those on your instrument.

• The pan ﬂute and sitar, shown in the displays of the DDK-7, are on display at the Hamamatsu Museum of

Musical Instruments.

• This device is capable of using various types/formats of music data by optimizing them to the proper format

music data for use with the device in advance. As a result, this device may not play them back precisely as their

producers or composers originally intended.

The DDK-7 is compatible with the following formats.

“GM (General MIDI)” is one of the most common Voice allocation formats. “GM System

Level 2” is a standard speciﬁcation that enhances the original “GM” and improves Song data

compatibility. It provides for increased polyphony, greater Voice selection, expanded Voice

parameters, and integrated effect processing.

XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha

speciﬁcally to provide more Voices and variations, as well as greater expressive control over

Voices and effects, and to ensure compatibility of data well into the future.

GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major

enhancement of the GM speciﬁcally to provide more Voices and Drum kits and their variations,

as well as greater expressive control over Voices and effects.

The Style File Format combines all of Yamaha’s auto accompaniment know-how into a single

uniﬁed format.

1

2

3

4

5

6

7

8

9

10

11

13

12

Appendix

Connections

Transpose

and Pitch Controls

Controllers

Rhythm Program

Voice Edit

Music Data Recorder

(M.D.R.)

Registration Memory

Rhythm/

Keyboard Percussion

Voice Controls

and Effects

Organ Flutes

Voices

Quick Introductory

Guide

Contents

Accessories ..............................................................4

Main Features ...........................................................5

Panel Layout . . . . . . . . . . . . . . . . . . . . . . . 8

Front Panel ................................................................8

LCD Display/Display Select ....................................10

Overview .................................................................10

1 Quick Introductory Guide . . . . . . . . . . 11

Getting Started........................................................11

Using the LCD Display............................................13

LCD Display Settings ..............................................16

Voice Display ..........................................................18

Registration Menu ...................................................21

Confirming the Version of Your DDK-7....................24

Factory Set (Initializing the DDK-7).........................24

2 Voices . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Voices for each keyboard .......................................25

Selecting Voices with the Voice buttons .................27

Voice List.................................................................33

3 Organ Flutes. . . . . . . . . . . . . . . . . . . . . 38

4 Voice Controls and Effects . . . . . . . . . 41

Selecting from the Voice Condition display ............42

Selecting from the panel .........................................47

Effect List ................................................................53

5 Rhythm/Keyboard Percussion . . . . . . 61

Selecting rhythms with the Rhythm button..............61

Rhythm List .............................................................69

Accompaniment......................................................71

Automatic Accompaniment – Auto Bass Chord

(A.B.C.) ...................................................................72

Melody On Chord (M.O.C.).....................................74

Keyboard Percussion..............................................75

6 Registration Memory . . . . . . . . . . . . . . 90

Storing Registrations...............................................90

Selecting Registrations ...........................................92

Saving the Registration data to USB flash memory 94

Initializing Registration Memory ..............................95

Registration Shift .....................................................95

Unifying a specific parameter...............................101

Copying Registrations...........................................104

7 Music Data Recorder (M.D.R.) . . . . . 106

Calling Up the M.D.R. Display ..............................106

Using the LCD Display..........................................107

Formatting External Media ....................................112

Selecting a Song...................................................113

Recording .............................................................117

Changing the Song Name ....................................120

Saving Registrations as Registration Data (File)...123

Recalling Recorded Registrations ........................128

Playing Back a Song.............................................130

Displaying the Score.............................................135

Other Functions (Tools).........................................137

8 Voice Edit. . . . . . . . . . . . . . . . . . . . . . 144

Voice Structure......................................................144

Editing a Voice ......................................................145

Saving the edited Voice ........................................152

Quitting Voice Edit.................................................153

Recalling an Edited Voice .....................................153

9 Rhythm Program . . . . . . . . . . . . . . . . 154

Outline of the Rhythm Programming Operation ....154

Rhythm Pattern Program .......................................155

Rhythm Sequence Program ..................................190

Saving Rhythm Pattern and Rhythm Sequence Data

to External Media ..................................................199

10 Controllers . . . . . . . . . . . . . . . . . . . . 200

Footswitches .........................................................200

Foot Pedal .............................................................203

Expression Pedals.................................................211

11 Transpose and Pitch Controls . . . . 214

12 Connections. . . . . . . . . . . . . . . . . . . 215

Accessory Jacks and Controls .............................215

Connecting Headphones or External System .......217

Connecting a Pedal Unit .......................................221

Connecting a Foot Pedal.......................................221

Connection with Computer....................................222

Connecting External Devices................................223

MIDI.......................................................................227

MIDI Control ..........................................................230

13 Appendix . . . . . . . . . . . . . . . . . . . . . 232

XG Voice & Drum List............................................232

XG Drum Map .......................................................237

MIDI Data Format ..................................................240

Troubleshooting ....................................................255

Specifications........................................................258

Index .....................................................................260

DDK-7 Owner’s Manual

8

Panel Layout

Front Panel

UPPER 1, 2

(page 25)

SUSTAIN button

(page 50)

REGIST MENU

(page 21)

RHYTHM/

KEYBOARD PERCUSSION

(page 61)

USB TO DEVICE terminal

(page 216)

[M.] (Memory) button

(page 90)

Registration memory

(page 90)

LOWER 1, 2

(page 26)

LCD display/

DISPLAY SELECT

(page 10)

PEDAL 1, 2

(page 26)

LEAD 1, 2

(page 25)

13 14 15 16

123

REVERB button

(page 47)

DDK-7 Owner’s Manual

9

MASTER VOLUME

dial (page 12)

[D.] (Disable) button

(page 92)

45678910 12

D.

11

POWER switch

(page 12)

DDK-7 Owner’s Manual

10

LCD Display/Display Select

Overview

1 LCD display (touch-panel) . . . . . . . . . . . . page 13

2 DATA CONTROL dial . . . . . . . . . . . . . . . . page 15

3 [VOICE DISPLAY] button . . . . . . . . . . . . . page 18

4 [REGIST MENU] button . . . . . . . . . . . . . . page 21

5 [FOOT SWITCH] button . . . . . . . . . .pages 96, 200

6 [MDR] button. . . . . . . . . . . . . . . . . . . . page 106

7 [INTERNET] button

*The Internet Direct Connection service is only available in

Japan. The DDK-7 cannot be connected to the Internet in

other countries due to unavailability of the service.

8 [UTILITY] button . . . . . . . pages 16, 211, 214, 230

9 [PROGRAM] button . . . . . . . . . . . . . . . page 145

) [SUSTAIN] button . . . . . . . . . . . . . . . . . page 50

! [REVERB] button . . . . . . . . . . . . . . . . . . page 47

@ [U. ORGAN FLUTES] button. . . . . . . . . . . page 38

# [L. ORGAN FLUTES] button . . . . . . . . . . . page 38

$ [ROTARY SP SPEED] button . . . . . . . . . . page 51

1

2

345 678 9)! @#$

AC INLET jack (page 215)

Upper keyboard

Lower keyboard

USB TO DEVICE terminal (page 215)

MIC jack (page 215)

Front Panel

(page 8)

TO PEDAL connector (page 216)

FOOT PEDAL jacks (page 216)

PHONES jack (page 215)

I/O connectors (page 216)

USB/MIDI terminals (page 216)

DDK-7 Owner’s Manual

11

Quick Introductory Guide

Whether you are an advanced performer or have never touched an electronic keyboard in your life, we

recommend that you take the time to go through this basic section. It shows you in the simplest

possible manner how to start playing your DDK-7.

Connect the power cord.

First insert the plug of the power cable into the AC INLET on the DDK-7, then

plug the other end of the cable into the proper AC outlet on the wall.

Connect the speakers or headphones.

Since the DDK-7 has no built-in speakers, you will need to monitor the sound

of the instrument by using external equipment. Connect a set of headphones,

powered speakers, or other playback equipment as required.

Contents

1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . .11

2 Using the LCD Display . . . . . . . . . . . . . . . . . . . . .13

• Changing the Display Page . . . . . . . . . . . . . . . . .13

• Pressing Buttons on the Display . . . . . . . . . . . . .14

• Adjusting Parameter Values by Using the Display

Sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

3 LCD Display Settings . . . . . . . . . . . . . . . . . . . . . .16

• Selecting the Display Language . . . . . . . . . . . . .16

• Muting the Touch Panel Sound. . . . . . . . . . . . . . .17

• Adjusting the Display Brightness . . . . . . . . . . . . .17

4Voice Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5 Registration Menu. . . . . . . . . . . . . . . . . . . . . . . . . 21

• Selecting Registrations . . . . . . . . . . . . . . . . . . . . 21

• Registration Menu List . . . . . . . . . . . . . . . . . . . . .23

6 Conﬁrming the Version of Your DDK-7 . . . . . . . . 24

7Factory Set (Initializing the DDK-7) . . . . . . . . . . . 24

1

Getting Started

Only use the voltage speciﬁed as correct for the DDK-7. The required voltage

is printed on the name plate of the DDK-7. Yamaha products are

manufactured speciﬁcally for the supply voltage in the area where they are to

be sold. If you intend to use the instrument in another location, or if any

doubt exists about the supply voltage, please consult with a qualiﬁed

technician.

1

AC INLET jack

2

Reference Pages

Using Headphones

(page 217)

Playing the Sounds of the

DDK-7 Through an External

Audio System (page 218)

Using a mixer for live

performance (page 218)

1

DDK-7 Owner’s Manual

12

Quick Introductory Guide

1

Turn the power on.

Make sure the volume settings of the DDK-7 and external devices are turned

down to the minimum.

Turn the power on by pressing the [POWER] switch on the DDK-7 front panel,

then turn the power on the ampliﬁers.

When powering down the setup, make sure to switch off the power of the

external device (or lower its volume) before switching off the DDK-7.

Set the MASTER VOLUME control.

The MASTER VOLUME control is an overall control that affects the volume of

the entire instrument.

Now that you've set up the DDK-7 properly, you're ready to begin playing it.

The Expression Pedal on the DDKU-P7 Pedal Unit can be used to control the

volume with your foot as you play.

Speaker (Left)

OUTPUT R

PHONES

Speaker (Right)

L/L+R

Do not use the instrument/

device or headphones for a

long period of time at a

high or uncomfortable

volume level, since this can

cause permanent hearing

loss.

3

Even when the power

switch is turned off,

electricity is still ﬂowing to

the product at the minimum

level.

Reference Page

Power-on Procedure

(page 219)

For turning the power on or off.

4

NOTE

when you connect an

external audio device to the

AUX OUT jacks, the output

level is ﬁxed and cannot be

controlled.

Decreasing

the volume

Increasing

the volume

DDK-7 Owner’s Manual

13

Quick Introductory Guide

1

This instrument features a special touch panel that allows you to change the parameters

by simply touching the ‘virtual’ buttons or sliders on the display. (Please note that two

or more parameters cannot be operated simultaneously.)

You can also use the Data Control dial to make ﬁne changes to the parameter value

shown in the display.

Changing the Display Page

There are some oval-shaped numbered buttons at the top right of the display. Pressing

these buttons changes the “page” of the display. The selected page’s button turns

orange.

2

Using the LCD Display

NOTE

When cleaning the display,

use a soft, dry cloth.

Do not use any sharp or

hard tools to operate the

touch panel. Doing so may

damage the display.

Page 1

Page 2

Press this button to select Page 1

Press this button to select Page 2

DDK-7 Owner’s Manual

14

Quick Introductory Guide

1

Pressing Buttons on the Display

There are three types of buttons: those that select a function, those that switch a

function on/off, and those that open a list or menu of parameters. To select the desired

function, simply press the button in the display directly.

For switching on/off or opening a parameter list, see the instructions below.

To switch the function on or off:

You can independently mute each Voice section in the Voice Display, each

accompaniment part in Rhythm Menu display, and each Element in the Voice Edit

display.

To open the parameter list:

When you press the button, a parameter list will appear in which you can select the

desired parameter.

Off, or mute (button is grayed out) On

DDK-7 Owner’s Manual

15

Quick Introductory Guide

1

Adjusting Parameter Values by Using the Display

Sliders

You can adjust some parameters such as Volume, Reverb, Pan and so on, by using the

‘virtual’ sliders in the display. There are two ways to move the slider in the display:

touching it directly, and using the Data Control dial. We suggest that you touch the

display slider when making coarse adjustments and use the Data Control dial for ﬁne

adjustment.

Touching the display slider directly:

Press a point in the slider to which you want to adjust the parameter value. The slider

will move to the point you pressed. Also, by sliding your ﬁnger up or down while

holding down the display slider, you can change the parameter value.

Using the Data Control dial:

Touch on/above the slider in the display to enable the parameter and set a rough value,

then turn the Data Control dial.

To control Pan, you can move the horizontal slider in the same way as vertical sliders.

Slider will move to the point you touch

Slider will follow your ﬁnger

or

DATA CONTROL

Touch here to enable the parameter

Blue mark

DATA CONTROL

DDK-7 Owner’s Manual

16

Quick Introductory Guide

1

Here you can change the display settings: displayed language (English or Japanese),

touch panel sound, and display brightness.

Selecting the Display Language

The LCD display can be shown in two languages, English and Japanese. The default

setting is English.

Press the [UTILITY] button to call up the GLOBAL Page of the

Utility Display.

Press the [GLOBAL] button to call up the GLOBAL Page.

Press the desired button, (Japanese) or [English].

3

LCD Display Settings

NOTE

The settings in the Utility

Display are automatically

saved when another display

is called up.

1

2

3

LANGUAGE

DDK-7 Owner’s Manual

17

Quick Introductory Guide

1

Muting the Touch Panel Sound

The DDK-7 is set by default with the touch panel sound turned on, giving you audio

feedback when you press a button or control. If you want to mute the touch panel

sound, follow the procedure below.

Press [UTILITY] button to call up GLOBAL Page of the Utility

Display.

Press the [OFF] button of the TOUCH PANEL SOUND to mute the

sound.

To turn the sound on again, select [ON] in Step #2.

Adjusting the Display Brightness

You can adjust the display brightness to a comfortable, easy-to-read level.

Press the [UTILITY] button to call up the GLOBAL Page of the

Utility Display.

Move the LCD BRIGHTNESS slider by touching it directly or

using the Data Control dial.

Higher settings make the display brighter and lower settings make it darker.

1

2

TOUCH PANEL SOUND

1

2

DATA CONTROL

LCD BRIGHTNESS

DDK-7 Owner’s Manual

18

Quick Introductory Guide

1

You can visually conﬁrm the currently assigned Voices to each keyboard, currently

selected rhythm, Registration Shift, and so on, in the Voice Display.

How to call up the Voice Display:

The Voice Display always appears when the DDK-7 is turned on. To call up the Voice

Display from any other display, press the [VOICE DISPLAY] button.

The Voice Display consists of four different pages that can be switched by pressing the

[1], [2], [3] or [4] button at the top right of the display.

4

Voice Display

1

2

564

3

Switching the Display Pages

Voice Display [Page 1]

DDK-7 Owner’s Manual

19

Quick Introductory Guide

1

1 Voice Sections

Shows the Voices currently assigned to each Voice section. You can also mute speciﬁc

Voice section by pressing its button (the button is grayed-out).

2 RHYTHM

Shows the currently selected rhythm.

3 A.B.C. MODE

Shows the mode of the Auto Bass Chord.

4 TEMPO

Shows the current rhythm tempo.

5 BAR/BEAT

Shows the bar/beat when the rhythm is playing.

6 REGISTRATION

Shows the current position of the Registration Shift.

You can conﬁrm the parameter values (for example, Reverb, Volume, Pan) for each

Registration Memory simultaneously. Moreover, you can unify a speciﬁc parameter

used in various Registration Memories at one time. See page 101 for the details.

Reference Page

Selecting a Voice (page 27)

Reference Page

Selecting a rhythm (page 61)

Reference Page

Auto Bass Chord (page 72)

Reference Page

Adjusting the tempo

(page 67)

Reference Page

Registration Shift (page 95)

Voice Display [Page 2]

DDK-7 Owner’s Manual

20

Quick Introductory Guide

1

The Registrations stored to the Registration number can be copied to another

Registration number for each individual section. See page 104 for the details.

Determines the Melody On Chord modes. See page 74 for details.

Voice Display [Page 3]

Reference Page

Registration Memory

(page 90)

Voice Display [Page 4]

Страница загружается...

Yamaha DDK-7 Инструкция по применению

Похожие модели бренда