NOCO G7200EU 2.0 Руководство пользователя

Welcome. Thank you for buying the NOCO Genius®

G7200. Read and understand the User Guide before

operating the charger. For questions regarding our

chargers, view our comprehensive support information at

www.no.co/support. To contact NOCO for personalized

support (not available in all areas), visit www.no.co/connect.

What’s In The Box.

• G7200 Smart Charger

• (1) Battery Clamp Connectors

• (1) Eyelet Terminal Connectors

• User Guide

• Information Guide and Warranty

User Guide

G7200 V2.0

PRIOR TO USE, READ AND UNDERSTAND

PRODUCT SAFETY INFORMATION.

Failure to follow the instructions may result

in ELECTRICAL SHOCK, EXPLOSION,

or FIRE, which may result in SERIOUS

INJURY, DEATH, DAMAGE TO DEVICE or

PROPERTY. Do not discard this information.

DANGER

Contacting NOCO.

About G7200. The NOCO Genius® G7200 represents

some of the most innovative and advanced technology

on the market, making each charge simple and easy. It is

quite possibly the safest and most efcient charger you

will ever use. The G7200 is designed for charging all types

of 12V lead-acid and 12V lithium-ion batteries, including

Wet (Flooded), Gel, MF (Maintenance-Free), CA (Calcium),

EFB (Enhanced Flooded Battery), AGM (Absorption Glass

Mat), and LIB (Lithium Ion) batteries. It is suitable for

charging battery capacities from 14 to 230 Amp-Hours and

maintaining all battery sizes.

Getting Started. Before using the charger, carefully

read the battery manufacturer’s specic precautions and

recommended rates of charge for the battery. Make sure

to determine the voltage and chemistry of the battery by

referring to your battery owner’s manual prior to charging.

Mounting. The G7200 has four (4) external holes for

mounting. Mount the charger in a desired location with

#6 self-drill screws. Make sure there are no obstructions

behind the mounting surface. It is important to keep in mind

the distance to the battery. The DC cable length from the

charger, with either the battery clamp or eyelet terminal

connectors, is approximately 75-inches (1900mm).

Charging Modes. The G7200 has nine (9) modes:

Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V

COLD/AGM, 12V LITHIUM, 12V AGM+, 13.6V SUPPLY,

and 12V REPAIR. Some charge modes must be pressed

and held for three (3) seconds to enter the mode. These

“Press and Hold” modes are advanced charging modes

that require your full attention before selecting. “Press

and Hold” are indicated on the charger by a red line. It is

1.800.456.6626

[email protected]

30339 Diamond Parkway, #102

Glenwillow, OH 44139

United States of America

Phone:

Email:

Mailing Address:

2

important to understand the differences and purpose

of each charge mode. Do not operate the charger until

you conrm the appropriate charge mode for your

battery. Below is a brief description:

Mode Explanation

12V

NORM

Standby

12V

COLD/

AGM

14.8V | 7.2A | 14-230Ah Batteries

24V

NORM

29V | 3.6A | 14-115Ah Batteries

29.6V | 3.6A | 14-115Ah Batteries

No Power

14.5V | 7.2A | 14-230Ah Batteries

24V

COLD/

AGM

In Standby mode, the charger is not

charging or providing any power to

the battery. Energy Save is activated

during this mode, drawing microscopic

power from the electrical outlet. When

selected, an orange LED will illuminate.

For charging 12-volt Wet Cell, Gel Cell,

Enhanced Flooded, Maintenance-Free

and Calcium batteries. When selected,

a white LED will illuminate.

For charging 12-volt batteries in cold

temperatures below 50ºF (10ºC) or

AGM batteries. When selected, a blue

LED will illuminate.

For charging 24-volt Wet Cell, Gel Cell,

Enhanced Flooded, Maintenance-Free

and Calcium batteries. When selected,

a white LED will illuminate.

For charging 24-volt batteries in cold

temperatures below 50ºF (10ºC) or

AGM batteries. When selected, a blue

LED will illuminate.

Using 12V Lithium. [Press & Hold]

12V Lithium charge mode is designed for 12-volt

lithium-ion batteries only, including lithium iron phosphate.

CAUTION. USE THIS MODE WITH CARE. THIS MODE IS

FOR 12-VOLT LITHIUM BATTERIES ONLY. LITHIUM-

ION BATTERIES ARE MADE AND CONSTRUCTED

IN DIFFERENT WAYS AND SOME MAY OR MAY NOT

CONTAIN A BATTERY MANAGEMENT SYSTEM (BMS).

CONSULT THE LITHIUM BATTERY MANUFACTURER

BEFORE CHARGING AND ASK FOR RECOMMENDED

CHARGING RATES AND VOLTAGES. SOME LITHIUM-ION

BATTERIES MAY BE UNSTABLE AND UNSUITABLE FOR

CHARGING.

Mode Explanation

12V

AGM+

13.6V

SUPPLY

12V

LITHIUM

15.5V | 7.2A | 14-230Ah Batteries

13.6V | 5A | Max 6A

14.2V | 7.2A | 14-230Ah Batteries

16.5V | 1.5A | Any Capacity

Press & Hold

12V

REPAIR

For charging 12-volt advanced AGM

batteries, which requires a higher

than normal charging voltage. When

selected, a blue LED will illuminate.

Converts to a DC power supply for

powering any 12VDC device, like a tire

inator, oil changer, or as a memory

retainer when replacing a battery. When

selected, a red LED will illuminate.

For charging 12-volt lithium-ion

batteries, including lithium iron

phosphate. When selected, a blue

LED will illuminate.

An advanced battery recovery mode

for repairing and storing, old, idle,

damaged, stratied or sulfated

batteries. When selected, a red LED

will illuminate and ash

Press & Hold

4

Using 12V AGM+. [Press & Hold]

12V AGM+ charge mode is designed for 12-volt

advanced AGM batteries only. Advanced AGM batteries

are a new battery technology typically found in start-

stop micro-hybrid vehicles. These batteries accept a

higher than normal charging voltage around 15.5-volts.

12V AGM+ charge mode is NOT suitable for traditional

AGM batteries. Consult the battery manufacturer before

using this mode.

CAUTION. USE THIS MODE WITH CARE. THIS

MODE IS FOR 12-VOLT LEAD-ACID ADVANCED

AGM BATTERIES ONLY. THIS MODE USES A HIGH

CHARGING VOLTAGE AND MAY CAUSE SOME

WATER LOSS IN WET (FLOODED) CELL BATTERIES

OR OVERCHARGE IN SOME BATTERIES.

Using 13.6V Supply. [Press & Hold]

13.6V Supply converts the charger to a constant

current, constant voltage DC power supply. It can be

used to power 12VDC devices, including; tire inators,

oil changers, coffee pots, seat heaters and more. As a

power supply, it can also be used to retain a vehicle’s

on-board computer settings during battery repair or

replacement. 13.6V Supply provides 13.6-volts at 5A

with overload protection at 6A (Max).

CAUTION. THIS MODE IS FOR 12-VOLT LEAD-ACID

BATTERIES ONLY. PRIOR TO USE, READ YOUR

12VDC DEVICE MANUAL TO DETERMINE IF IT IS

SUITABLE FOR USE WITH THIS MODE. BOTH THE

SPARK PROOF AND REVERSE POLARITY SAFETY

FEATURES ARE DISABLED IN THIS MODE. DO NOT

ALLOW THE POSITIVE AND NEGATIVE BATTERY

CLAMP OR EYELET TERMINAL CONNECTORS TO

TOUCH OR CONNECT TO EACH OTHER AS THE

CHARGER COULD GENERATE SPARKS. CHECK THE

POLARITY OF THE BATTERY TERMINALS BEFORE

USING THIS MODE.

Using 12V Repair. [Press & Hold]

12V Repair is an advanced battery recovery mode for

repairing and storing, old, idle, damaged, stratied or

sulfated batteries. Not all batteries can be recovered.

Batteries tend to become damaged if kept at a low charge

and/or never given the opportunity to receive a full charge.

The most common battery problems are battery sulfation

and stratication. Both battery sulfation and stratication

will articially raise the open circuit voltage of the battery,

causing the battery to appear fully charged, while providing

low capacity. Use 12V Repair in attempt to reverse these

problems. For optimal results, take the 12-volt battery

through a full charge cycle, bringing the battery to full

charge, before using this mode. 12V Repair can take up

to four (4) hours to complete the recovery process and will

return to Standby when completed.

CAUTION. USE THIS MODE WITH CARE. THIS MODE

IS FOR 12-VOLT LEAD-ACID BATTERIES ONLY. THIS

MODE USES A HIGH CHARGING VOLTAGE AND MAY

CAUSE SOME WATER LOSS IN WET (FLOODED) CELL

BATTERIES. BE ADVISED, SOME BATTERIES AND

ELECTRONICS MAY BE SENSITIVE TO HIGH CHARGING

VOLTAGES. TO MINIMIZE RISKS TO ELECTRONICS,

DISCONNECT THE BATTERY BEFORE USING THIS

MODE.

Connecting to the Battery.

Do not connect the AC power plug until all other

connections are made. Identify the correct polarity of

the battery terminals on the battery. The positive battery

terminal is typically marked by these letters or symbol

(POS,P,+). The negative battery terminal is typically marked

by these letters or symbol (NEG,N,-). Do not make any

connections to the carburetor, fuel lines, or thin, sheet metal

parts. The below instructions are for a negative ground

system (most common). If your vehicle is a positive ground

system (very uncommon), follow the below instructions in

reverse order.

1.) Connect the positive (red) battery clamp or eyelet

terminal connector to the positive (POS,P,+) battery

terminal.

6

2.) Connect the negative (black) battery clamp or eyelet

terminal connector to the negative (NEG,N,-) battery

terminal or vehicle chassis.

3.) Connect the battery charger’s AC power plug into a

suitable electrical outlet. Do not face the battery when

making this connection.

4.) When disconnecting the battery charger, disconnect

in the reverse sequence, removing the negative rst (or

positive rst for positive ground systems).

Begin Charging.

1.) Verify the voltage and chemistry of the battery.

2.) Conrm that you have connected the battery clamps

or eyelet terminal connectors properly and the AC power

plug is plugged into an electrical outlet.

3.) The charger will begin in Standby mode, indicated by

an orange LED. In Standby, the charger is not providing

any power.

4.) Press the mode button to toggle to the appropriate

charge mode (press and hold for three seconds to enter

an advanced charge mode) for the voltage and chemistry

of your battery.

5.) The mode LED will illuminate the selected charge

mode and the Charge LEDs will illuminate (depending on

the health of the battery) indicating the charging process

has started.

6.) The charger can now be left connected to the battery

at all times to provide maintenance charging.

Understanding Charge LEDs.

The charger has four (4) Charge LEDs per bank - 25%,

50%, 75% and 100%. These Charge LEDs indicate the

connected battery(s) state-of-charge (SOC). See the

explanation below:

LED Explanation

Maintenance

Green LED

25%

Red LED The 25% Charge LED will slowly

pulse “on” and “off”, when the battery

is less than 25% fully charged. When

the battery is 25% charged, the red

Charge LED will be solid.

50%

Red LED

During maintenance charging, the

100% Charge LED will pulse “on”

and “off” slowly. When the battery is

topped off and fully charged again,

the 100% Charge LED will turn

solid green. The charger can be left

connected to the battery indenitely.

75%

Orange LED

The 50% Charge LED will slowly

pulse “on” and “off”, when the battery

is less than 50% fully charged. When

the battery is 50% charged, the red

Charge LED will be solid.

The 75% Charge LED will slowly pulse

“on” and “off”, when the battery is less

than 75% fully charged. When the

battery is 75% charged, the orange

Charge LED will be solid.

The 100% Charge LED will slowly

pulse “on” and “off”, when the battery

is less than 100% fully charged. When

the battery is fully charged, the green

LED will be solid, and the 25%, 50%

and 75% Charge LEDs will turn “off”.

100%

Green LED

25% 50% 75% 100%

8

Understanding Advanced Diagnostics.

Advanced Diagnostics is used when displaying Error

Conditions. It will display a series of blink sequences

that help you identify the cause of the error and

potential solutions.

All Error Conditions are displayed with the Error LED

and Standby LED ashing back and forth. The

number of ashes between each pulse denotes a

potential Error Condition (except reverse polarity and

low-voltage battery).

Error Reason/Solution

Single

Flash

Battery will not hold a charge.

Have battery checked by a

professional.

Possible battery short.

Have battery checked by a

professional.

Battery voltage is too high for

the selected charge mode.

Check the battery and charge

mode.

Error LED

Solid Red

Reverse polarity. Reverse the

battery connections.

Battery voltage is too low for

charge to detect or charger

is in supply. Jumpstart the

battery to raise the battery

voltage.

Double

Flash

Triple

Flash

Standby

Solid Orange

Memory

Returns to last selected mode when restarted

Interactive

Alters the charging process based on organic

battery feedback

Recovery

Applies a high-voltage pulse charge when low-

voltage, sulfation or lost capacity is detected

Safe

Protects against reverse polarity, sparks,

overcharging, overcurrent, open-circuits,

short-circuits and overheating

Fast

Charges two times faster than traditional

battery chargers

Compensation

Adjusts for varying A/C line voltage for

consistent charging

Rugged

Dirt, water, UV, impact and crush resistant

Compact

High-frequency energy conversion for

ultra-compact, lightweight and portable charger

Start-Stop

Counteracts increased cyclic energy demands

placed on batteries in micro-hybrid vehicles

Firewall

Multi-level safety barrier that prevents abnormal

and unsafe conditions

10

Optimization

Stabilizes internal battery chemistry for

increased performance and longevity

Maintenance Plus

Keeps the battery fully charged without

overcharging allowing the charger to be

safely connected indenitely

Energy Save

Minimizes energy consumption when full

power is not needed

Load Tracking

Charge LEDs dynamically track the

batteries state-of-charge when a load

outpaces the charge current

Diagnostics

Intuitive visual diagnostic tool for detecting

reverse polarity, low-voltage or damaged

batteries

CANBUS

Automatically enables the charging port to

charge CANBUS systems

Thermal Monitor

Internal temperature sensors adjust charge

based on ambient climate

Charging Steps.

Step 1 & 2: Analyze & Diagnose

Checks the battery’s initial condition, including voltage,

state-of-charge and health, to determine if the battery is

stable before charging.

Step 3: Recovery

Initializes the Recovery desulfation process (if needed)

for deeply discharged or sulfated batteries by pulsing

small amounts of current.

Step 4: Initialize

Starts the charging process with a gentle (soft) charge.

Step 5: Bulk

Begins the Bulk charging process based on the

condition of the battery and returns 80% of the battery’s

capacity.

Step 6: Absorption

Brings the charge level to 90% by delivering small

amounts of current to provide a safe, efcient charge.

This limits battery gassing and is essential to prolonging

battery life.

Step 7: Optimization

Finalizes the charging process and brings the battery

to maximum capacity. In this step, the charger utilizes

multi-layered charging proles to fully recapture capacity

and optimize the specic gravity of the battery for

increased run time and performance. The charger will

switch to Maintenance if the battery tells the charger that

more current is needed.

1 2 3 4 5 6 7 8

Analyze

Step

Voltage (V)

Current (A)

Initialize

Diagnose

Bulk

Optimization

Recovery

Absorption

Maintenance

12

Step 8: Maintenance

Continuously monitors the battery to determine when

a maintenance charge should be initiated. If the battery

voltage falls below its target threshold, the charger will

restart the Maintenance cycle until voltage reaches its

optimal state and then discontinues the charge cycle.

The cycle between Optimization and Maintenance is

repeated indenitely to keep the battery at full charge.

The battery charger can be safely left connected

indenitely without the risk of overcharging.

Charging Times.

The estimated time to charge a battery is shown below.

The size of the battery (Ah) and its depth of discharge

(DOD) greatly affect its charging time. The charge time

is based on an average depth of discharge to a fully

charged battery and is for reference purposes only.

Actual data may differ due to battery conditions. The

time to charge a normally discharged battery is based

on a 50% DOD.

Battery Size Approx. Time to Charge In Hours

12V

40

80

100

150

230

2.8

5.6

6.9

10.4

16.0

5.6

11.1

13.9

20.8

-

24VAh

220-240, 50-60Hz

85% Approx.

132W Max

Various

7.2A (12V),

3.6A (24V)

2V (12V), 14V (24V)

<5mA

0°C to +40°C

8 Step, Smart Charger

12V & 24V

Wet, Gel, MF, CA, EFB,

AGM & LIB

14-230Ah (12V), 14-115Ah

(24V), Maintains

All Battery Sizes

IP65

Natural Convection

9.17 x 3.74 x 2.32 Inches

1.73 Pounds

Input Voltage AC:

Working Voltage AC:

Efciency:

Power:

Charging Voltage:

Charging Current:

Low-Voltage Detection:

Back Current Drain:

Ambient Temperature:

Charger Type:

Type of Batteries:

Battery Chemistries:

Battery Capacity:

Housing Protection:

Cooling:

Dimensions (L x W x H):

Weight:

Technical Specications.

14

Bienvenue. Merci pour l’achat d’un NOCO

Genius® G7200. Veuillez lire et comprendre le manuel

d’utilisation avant d’utiliser l’appareil. Pour toutes

questions concernant nos chargeurs, veuillez consulter

nos informations exhaustives à l’adresse www.no.co/

support. Pour contacter NOCO an d’avoir un service

personnalisé (n’existe pas dans toutes les régions),

consultez l’adresse www.no.co/connect.

Contenu de la boîte.

• G7200 Chargeur intelligent

• (1) Bride de serrage HD pour batterie

• (1) Connecteurs de borne à œil

• Manuel d’utilisation

• Guide d’utilisation et garantie

Manuel d’utilisation

G7200 V2.0

AVANT TOUTE UTILISATION -

VEUILLEZ LIRE ET COMPRENDRE

LES INDICATIONS DE SÛRETÉ.Ne

pas respecter ces instructions peut

conduire à un CHOC ÉLECTRIQUE, UNE

EXPLOSION, UN INCENDIE pouvant

causer des BLESSURES GRAVES, LA

MORT ou ENDOMMAGER L’APPAREIL

ou d’autres OBJETS. N’ignorez pas les

informations contenues ici.

DANGER

Contacter NOCO.

À propos de G7200. Le NOCO Genius® G7200

dispose des technologies parmi les plus innovantes et

avancées du marché, rendant chaque chargement simple

et facile. C’est très probablement un des chargeurs les

plus sûrs et les plus efcaces que vous utiliserez. Le G7200

est conçu pour charger tous types de batteries de 12V

plombacide et 12V lithium-ions, y compris des batteries

humides, à gel, MF (sans entretien), CA (Calcium), EFB

(Enhanced Flooded Battery), AGM (Absorption Glass

Mat),LIB (Lithium Ion). Il est adapté au chargement de

batteries d’une capacité de 14 à 230 ampères-heures et à

l’entretien des batteries de toute tailles.

Premiers pas. Avant d’utiliser le chargeur, veuillez lire

attentivement les indications du fabricant et les taux de

chargement recommandés pour la batterie. Soyez certains

de déterminez le voltage et la composition chimique de

la batterie en consultant le guide d’utilisation avant tout

chargement.

Montage. Le G7200 dispose de quatre (4) oeillères de

xation. Fixez le chargeur à l’endroit souhaité avec six

vis. Assurez-vous qu’il n’y a pas d’obstructions derrière

la surface de montage. Il est important de garder à l’esprit

la distance jusqu’à la batterie. La longueur du câble DC

depuis le chargeur, avec soit la bride de serrage ou le

connecteur de borne à œil, est approximativement de 1900

mm (75 pouces).

Modes de chargement. Le G7200 dispose de

neuf (9) modes : Veille, NORMAL 12V, FROID/AGM 12V,

NORMAL 24V, FROID/AGM 24V, LITHIUM 12V, AGM+

12V, 13.6V SUPPLY et RÉPARATION 12V. Pour déclencher

certains modes de chargement, il faut appuyer pendant

trois (3) secondes pour déclencher le mode. Ces modes

“appuyer et maintenir” sont des modes de chargement

1.800.456.6626

[email protected]

30339 Diamond Parkway, #102

Glenwillow, OH 44139

United States of America

Téléphone :

E-Mail :

Adresse postale :

16

avancés qui retiendront toute votre attention avant de

les déclencher. “Appuyer et charger” sont indiqués sur

le chargeurs sur une ligne rouge. Il est important de

comprendre les différences et les avantages de chaque

mode de chargement. Il est important de charger

jusqu’à ce que vous conrmiez le mode de chargement

de votre batterie. Ci-dessous se trouve une brève

description :

Mode Explication

NORME

12V

Veille

FROID/

AGM

12V

14.8V | 7.2A | 14-230Ah Batterie

NORME

24V

29V | 3.6A | 14-115Ah Batterie

29.6V | 3.6A | 14-115Ah Batterie

Pas de courant

14.5V | 7.2A | 14-230Ah Batterie

FROID/

AGM

24V

En mode veille, le chargeur ne charge

pas ou ne fournit aucune électricité à la

batterie. Le mode économie d’énergie

est activé durant ce mode et s’alimente

à très petites doses sur la prise de

courant. Lorsqu’il est choisi, un LED

orange s’allume.

Pour charger une batterie humide, à gel,

EFB (enhanced ooded batteriy), sans

entretien et au calcium. Lorsqu’il est

choisi, un LED blanc s’allume.

Pour charger des batteries de 12 volts

à des températures en-dessous de 10°

C ou des batteries AGM. Lorsqu’il est

choisi, un LED bleu s’allume.

Pour charger une batterie 24 volt

humide, à gel, EFB (enhanced ooded

batteriy), sans entretien et au calcium.

Lorsqu’il est choisi, un LED blanc

s’allume.

Pour charger des batteries de 24 volts

à des températures en-dessous de

10° C ou des batteries AGM. Lorsqu’il

est choisi, un LED bleu s’allume.

Utilisation du mode lithium 12V.

Appuyer & maintenir

Le mode de chargement lithium 12V est conçu pour

des batteries 12 volts à lithium ions, y compris lithium fer

phosphate.

ATTENTION. UTILISEZ CE MODE AVEC PRÉCAUTION.

CE MODE EST UNIQUEMENT ADAPTÉ À DES BATTERIES

PLOMBACIDE 12 VOLT. LES BATTERIES LITHIUM-IONS

SONT FABRIQUÉES DE MANIÈRES DIFFÉRENTES ET

CERTAINES CONTIENNENT OU NON DES SYSTÈMES

DE GESTION DE BATTERIES (BMS). CONSULTEZ LE

FABRICANT DE BATTERIES LITHIUM AVANT DE CHARGER

ET RENSEIGNEZ-VOUS SUR LES TAUX DE CHARGEMENT

Mode Explication

AGM+

12V

ALIMENTATION

13.6 V

LITHIUM

12V

15.5V | 7.2A | 14-230Ah Batterie

13.6V | 5A | 6A Max

14.2V | 7.2A | 2-120Ah Batterie

16.5V | 1.5A | Tous les Capacités

RÉPARATION

12 V

Pour charger des batteries AGM 12 volt

qui requièrent une tension de chargement

supérieure à la normale. Lorsqu’il est

choisi, un LED bleu s’allume.

Convertit vers une alimentation DC pour

alimenter n’importe quel appareil de 12V

en courant direct, tel un goneur de pneu,

un changeur d’huile ou bien comme

sauvegarde mémoire au moment de

changer une batterie. Lorsqu’il est choisi,

un LED rouge s’allume.

Pour charger des batteries 12 volt

lithium-ions, y compris lithium fer

phosphate. Lorsqu’il est choisi, un LED

bleu s’allume.

Un mode batterie avancé de

récupération pour réparer, sauvegarder

et stocker des batteries sulfatées

ou stratiées, vieilles, inutilisées ou

endommagées. Lorsqu’il est choisi, un

LED rouge s’allumera et clignotera.

Appuyer &

maintenir

Appuyer &

maintenir

Appuyer &

maintenir

Appuyer &

maintenir

18

ET DE TENSION. CERTAINES BATTERIES LITHIUM-

IONS PEUVENT ÊTRE INSTABLES ET INADAPTÉES

AU CHARGEMENT.

Utilisation du mode de chargement AGM+

12V. Appuyer & maintenir

Le mode de chargement AGM+ 12V est conçu pour

des batteries AGM avancées. Les batteries AGM

avancées disposent d’une nouvelle technologie que

l’on trouve aussi dans les véhicules micro-hybrides

start-stop. Ces batteries acceptent une tension de

chargement plus élevée que d’habitude aux alentours

de 15.5 volts. Le mode de charge AGM+ 12V n’est PAS

adapté à des batteries AGM traditionnelles. Consultez le

fabricant de batteries avant d’utiliser ce mode.

ATTENTION. UTILISEZ CE MODE AVEC

PRÉCAUTION. CE MODE EST UNIQUEMENT ADAPTÉ

À DES BATTERIES PLOMBACIDE AGM AVANCÉES

12 VOLT. CE MODE UTILISE UNE TENSION POUR

CHARGEMENT INTENSE ET PEUT PROVOQUER DES

PERTES D’EAU DANS DES BATTERIES HUMIDES

(EFB - ENHANCED FLOODED BATTERIES), DES

BATTERIES À GEL OU UNE SURCHARGE DANS

CERTAINES BATTERIES.

Utilisation du mode de chargement

alimentation 13.6 V. Appuyer & maintenir

Le mode 13.6 V convertit le chargeur en source

d’alimentation DC de courant et de tension constants.

Il peut être utilisé pour alimenter les appareils 12 VDC,

y compris : des goneurs de pneu, des changeurs

d’huile, des chauffe-siège et bien plus. En tant

qu’alimentation, il peut également être utilisé pour

sauvegarder les paramétrages d’un ordinateur de bord

de véhicule pendant la réparation ou le remplacement

d’une batterie. Le mode 13.6V fournit du courant 13.6

volt à 5 ampères avec une protection de surcharge à 6

ampères (max).

ATTENTION. CE MODE EST UNIQUEMENT

ADAPTÉ À DES BATTERIES PLOMBACIDE 12 VOLT.

AVANT TOUTE UTILISATION, LISEZ LE MANUEL

D’UTILISATION 12VDC POUR DÉTERMINER S’IL EST

ADAPTÉ À UNE UTILISATION AVEC CE MODE. DANS

CE MODE, LA POLARITÉ INVERSÉE ET LA PROTECTION

ÉTINCELLES SONT DÉSACTIVÉS. N’AUTORISEZ PAS LA

BRIDE DE SERRAGE NÉGATIVE ET POSITIVE OU LES

CONNECTEURS DE BORNES À OEIL DE SE TOUCHER OU

DE SE CONNECTER COMME LE CHARGEUR POURRAIT

GÉNÉRER DES ÉTINCELLES. VÉRIFIEZ LA POLARITÉ DES

BORNES DE LA BATTERIE AVANT D’UTILISER CE MODE.

Utilisation du mode de réparation 12 V.

Appuyer & maintenir

Le mode batterie de réparation 12V de récupération pour

réparer, sauvegarder et stocker des batteries sulfatées

ou stratiées, vieilles, inutilisées ou endommagées. Pas

toutes les batteries peuvent être récupérées. Les batteries

ont tendance à être endommagées si leur chargement

est durablement bas et/ou s’ils ne reçoivent jamais un

chargement complet. Les problèmes de batterie les plus

répandus sont le sulfatage et la stratication de la batterie. Le

sulfatage et la stratication augmentera de façon articicielle

le circuit de tension ouvert de la batterie, ce qui provoquera

l’apparence d’une charge complète, tout en fournissant une

capacité basse. Utilisez les mode de réparation 12V pour

inverser ces problèmes. Pour obtenir les meilleurs résultats,

soumettez la batterie 12 volt à un cycle de chargement

complet, amenant la batterie à une charge complète, avant

d’utiliser ce mode. Ce mode peut prendre jusqu’à quatre (4)

heures pour compléter le processus de récupération, lorsqu’il

sera terminé il reviendra en mode veille.

ATTENTION. UTILISEZ CE MODE AVEC PRÉCAUTION.

CE MODE EST UNIQUEMENT ADAPTÉ À DES BATTERIES

PLOMBACIDE 12 VOLT. CE MODE UTILISE UNE TENSION

POUR CHARGEMENT HAUTE TENSION ET PEUT

PROVOQUER DES PERTES D’EAU DANS DES BATTERIES

HUMIDES. SOYEZ AVERTIS, CERTAINES BATTERIES ET

PIÈCES ÉLECTRONIQUES PEUVENT ÊTRE SENSIBLES

À DES HAUTES TENSIONS DE CHARGEMENT. AFIN

DE RÉDUIRE LES RISQUES POUR LES APPAREILS

ÉLECTRONIQUES, DÉCONNECTEZ LA BATTERIE AVANT

D’UTILISER CE MODE.

Connecter la batterie. Ne connectez pas la prise de

courant AC jusqu’à ce que toutes les autres connections

Страница загружается...