Electronic Arts 4169088 Руководство пользователя

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ΕΛΛΗΝΙΚΑ

TÜRKÇE

POLSKI

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

1/16

FOR P

LAYSTATION®3 – PLAYSTATION®4

User Manual

WARNING:

To ensure that your T300 RS racing wheel functions correctly

with games for PlayStation®3 or PlayStation®4,

you may be required to install the games’ automatic updates

(available when your console is connected to the Internet).

2/16

TECHNICAL FEATURES

1 T300 RS base

2 PS wheel

3 2 sequential paddle shifters (Up & Down)

4 Directional buttons

5 PS4™ or PS3™ USB sliding switch

6 MODE button + red/green indicator light

7 SELECT/START buttons on PS3™ and

SHARE/OPTIONS on PS4™

8 PS button

9 Large threaded hole (for attachment system

and fastening screw)

10 Attachment system

11 Metal fastening screw

12 Thrustmaster Quick Release

13 L3/R3 buttons

14 Power supply connector (type A or B)

(varies from one country to another)

15 Racing wheel USB cable and connector

16 Shifter (gearbox) connector

(sold separately)

17 Pedal set connector

3/16

PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET:

PLEASE READ BEFORE PROCEEDING!

Your racing wheel’s power supply varies according to the country where you purchased your device.

The power supply can be:

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 220-240 V power supply cable.

= compatible only with 220-240 V electrical power.

Never connect the 220-240 V cable

to a 100-130 V electrical outlet!!!

Never connect this cable to a power adapter!!!

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 100-125 V power supply cable.

= compatible only with 100-125 V electrical power.

Never connect the 100-125 V cable

to a 220-240 V electrical outlet!!!

Never connect this cable to a power adapter!!!

IMPORTANT: if you do not know which voltage is supplied in the area in which you are using

your racing wheel, please ask your local electricity supplier.

External, with:

* an external power supply unit, with a type B connector.

* a power supply cable.

= compatible with all electrical voltages, from 110-240 V.

4/16

WARNINGS

Before using this product, please read this manual carefully and save it for later reference.

Warning – Electrical shock

* Keep the product in a dry location and do not expose it to dust or sunlight.

* Do not twist or pull on the connectors and cables.

* Do not spill any liquid on the product or its connectors.

* Do not short-circuit the product.

* Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.

* Do not use a power supply cable other than the one provided with your racing wheel.

* Do not use the power supply cable if the cable or its connectors are damaged, split or broken.

* Make sure that the power supply cable is properly plugged into an electrical outlet, and properly

connected to the connector at the rear of the racing wheel’s base.

* Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be

carried out by the manufacturer, its authorized representative or a qualified technician.

* Only use attachment systems/accessories specified by the manufacturer.

* If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors), stop

using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other

cables.

* If you will not be using the racing wheel for an extended period of time, unplug its power supply cable

from the electrical outlet.

Air vents

Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure

to do the following:

* Position the wheel’s base at least 10 cm away from any wall surfaces.

* Do not place the base in any tight spaces.

* Do not cover the base.

* Do not let any dust build up on the air vents.

For safety reasons, never use the pedal set with bare feet

or while wearing only socks on your feet.

THRUSTMASTER

®

DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF

INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Injuries due to Force Feedback and repeated movements

Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:

* Avoid lengthy gaming periods.

* Take 10 to 15 minute breaks after each hour of play.

* If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few

hours before you start playing again.

5/16

Warning – Injuries due to Force Feedback and repeated movements (continued)

* If the symptoms or pain indicated above persist when you start playing again, stop playing and

consult your doctor.

* Keep out of children’s reach.

* During gameplay, always leave both hands correctly positioned on the wheel without letting it go

completely.

* During gameplay, never place your hands or your fingers under the pedals or anywhere near the

pedal set.

* During calibration and gameplay, never place your hand or your arm through the openings in the

racing wheel.

* Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.

Product to be handled only by users

16 years of age or older

HEAVY PRODUCT

Be careful not to drop the product on

yourself or on anyone else!

ALWAYS NEVER NEVER

6/16

Warning – Pedal set pinch hazard when playing

* Keep the pedal set out of children’s reach.

* During gameplay, never place your fingers on or anywhere near the sides of the pedals.

* During gameplay, never place your fingers on or anywhere near the pedals’ rear base.

* During gameplay, never place your fingers on or anywhere near the pedals’ front base.

NEVER NEVER NEVER

Warning – Pedal set pinch hazard when not playing

* Store the pedal set in a safe place, and keep it out of children’s reach.

UPDATING YOUR RACING WHEEL’S FIRMWARE

The firmware included in your racing wheel’s base can be updated to a more recent version featuring

product enhancements.

To display the firmware version that your racing wheel is currently using and update it if required: on

PC, visit http://support.thrustmaster.com. Click Racing Wheels / T300 RS, then select Firmware

and follow the instructions describing the download and installation procedure.

Important note:

On PC, the USB sliding switch (5) on the racing wheel’s base must always be set to the PS3™

position.

7/16

INSTALLING THE RACING WHEEL ON ITS BASE

Align the connector positions using the arrows:

Base (1) connector: Arrow pointing upwards

Racing wheel (2) connector: Arrow pointing upwards

Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device’s

ring counterclockwise, while holding the racing wheel (2) in position.

Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel

clockwise.

Once you have installed the racing wheel, rotate it 180° (when facing the wheel, the PlayStation® logo

should be upside down) to access the small attachment screw located on the ring of the Thrustmaster

Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not

use excessive force), turning it clockwise.

Do not use excessive force when tightening the small attachment screw

(using a Phillips screwdriver)!

Stop turning the screw as soon as you feel some resistance.

8/16

ADJUSTING THE PEDALS’ HEIGHT AND SPACING

Using a Phillips screwdriver (not included), remove the 2 attachment screws holding the pedal heads to

the pedal arms.

Next, adjust the pedal heads’ height and spacing to suit your preferred driving style:

- 6 different positions are available for the gas pedal.

- 6 different positions are available for the brake pedal.

Once you are happy with the height and spacing, replace and re-tighten the 2 attachment screws

holding the pedal heads to the pedal arms.

ATTACHING THE RACING WHEEL

Attaching the racing wheel to a table or a desktop

1. Place the racing wheel on a table or any other horizontal, flat and stable surface.

2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning

the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the

racing wheel, until the wheel is perfectly stable.

ALWAYS NEVER

WARNING: Never tighten the screw alone, without the attachment system in place!

(This could damage the racing wheel.)

9/16

ATTACHMENT /

REMOVAL

DIRECTION

To tighten:

Turn the screw

counterclockwise

To release:

Turn the screw

clockwise

10/16

Attaching the racing wheel’s base to a cockpit

1. Place the racing wheel’s base on the cockpit shelf.

2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small

screw threads located on the underside of the racing wheel.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm;

longer screws could cause damage to internal components located in the racing wheel’s base.

3. If required, tighten the standard attachment system by inserting the fastening screw in the large

threaded hole.

Attaching the pedal set to a cockpit

1. Attach the pedal set using the small screw threads located on its underside.

2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small

screw threads located on the underside of the pedal set.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 10 mm;

longer screws could cause damage to internal components located in the pedal set.

PLAYSTATION®3 AND PLAYSTATION®4 MAPPING

11/16

SETTING UP THE RACING WHEEL FOR PLAYSTATION®3 OR

P

LAYSTATION®4

1. Connect the pedal set to the connector (17) located at the back of the racing wheel's base.

2. Connect the power supply cable to the connector (14) located at the back of the racing wheel's

base.

3. Plug the power supply cable into an electrical outlet with the same voltage specifications.

For more information about this, please refer to the PLUGGING THE RACING

WHEEL INTO AN ELECTRICAL OUTLET section, on page 3 in this manual.

4. Set the USB sliding switch (5) on the racing wheel’s base to either the PS3™ or PS4™ position,

depending on the console or the game you are using.

5. Connect the racing wheel’s USB connector (15) to one of the console’s USB ports.

6. Once your console is powered on, your racing wheel will calibrate itself automatically.

7. On PlayStation

®4 (when the USB sliding switch is set to the PS4™ position): press the racing

wheel’s PS button (8) and sign in to your Sony Entertainment Network account, in order to be able

to use the wheel.

You are now ready to play!

Important notes:

- The USB sliding switch (5) on the racing wheel’s base must always be set to the proper

position (PS3™ or PS4™) before connecting the wheel’s USB cable to the console. To change

the sliding switch’s position, disconnect the USB cable from the console and then change the

position of the switch before reconnecting the USB cable to the console.

- On PlayStation®3, the USB sliding switch (5) must always be set to the PS3™ position:

* The wheel is recognized in most games as a T500RS wheel.

* The wheel is functional in compatible games and in console menus.

* The “PS” function is functional on the wheel.

- On PlayStation®4, with the USB sliding switch (5) in the PS3™ position:

* The wheel is recognized in most games as a T500RS wheel.

* The wheel is functional in compatible games, but not in console menus.

* The “SHARE” and “PS” functions are not functional on the wheel.

- On PlayStation®4, with the USB sliding switch (5) in the PS4™ position:

* Don't forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.

* The wheel is recognized in most games as a T300 RS wheel.

* The wheel is functional in compatible games and in console menus.

* The “SHARE” and “PS” functions are functional on the wheel.

- The list of PlayStation®3 and PlayStation®4 games compatible with the T300 RS (along with

the required position for the USB sliding switch (5) according to the game being played) is

available at:

http://support.thrustmaster.com

(click Racing Wheels / T300 RS / Games settings).

This list is updated regularly.

12/16

SETTING UP THE RACING WHEEL FOR PC*

* PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe.

For more information, visit http://support.thrustmaster.com.

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION

The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and

connect the racing wheel’s USB connector to the console.

During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080

degree angle, before stopping at the centre.

WARNING:

Never touch the racing wheel during the self-calibration phase!

(This could result in improper calibration and/or personal injuries.)

AUTOMATIC CALIBRATION OF THE PEDAL SET

Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is

connected to the console or during gameplay (this could result in improper calibration).

Always connect the pedal set before connecting the racing wheel to the console.

Once the racing wheel’s calibration is complete and the game has been started, the pedals are

automatically calibrated after a few presses.

WARNING:

Never press the pedals during the racing wheel's

self-calibration phase or while a game is loading!

(This could result in improper calibration.)

If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly

calibrated:

Power off your console and completely disconnect the racing wheel. Then reconnect all cables

(including the power supply cable and the pedal set), and restart your console and your game.

INTERNAL TEMPERATURE SENSOR

The wheel’s cooling system is composed of a heat sink and a fan.

• A thermostat monitors the wheel’s internal temperature.

• When you are using the wheel in a game:

- The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes

of gameplay, depending on the strength of the Force Feedback effects used).

- The power of the Force Feedback effects automatically decreases as soon as the wheel reaches

a much higher temperature level (to protect the motor). The power of these effects automatically

increases as soon as the temperature slightly decreases.

• When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate

until the temperature drops below the fan’s startup level. Your wheel has been designed in this way

in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending

on the temperature reached while using the wheel in a game).

13/16

MODE BUTTON AND INDICATOR LIGHT (6)

MODE button for the pedal set

The pedal set included with the T300 RS features 2 pedals.

When using this pedal set, make sure that the indicator light remains red, or else the gas pedal will not

function properly.

The T300 RS is also compatible with Thrustmaster pedal sets featuring 3 pedals (sold separately);

these allow you to electronically swap the accelerator and clutch pedals.

To do so, simply press the MODE button (6) for 2 seconds.

The racing wheel’s internal memory stores whether the pedals have been swapped around or not.

GAS AND CLUTCH PEDALS

Color of the MODE indicator light (6)

NORMAL

RED

SWAPPED AROUND GREEN

Other information regarding the MODE button

To learn more about the MODE button and indicator light, please visit

http://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select Manual or FAQ.

HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)

Please visit http://support.thrustmaster.com. Click Racing Wheels / T300 RS, and then select

Manual or FAQ.

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.

97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this

Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period

which corresponds to the time limit to bring an action for conformity with respect to this product. In the

countries of the European Union, this corresponds to a period of two (2) years from delivery of the

Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an

action for conformity with respect to the Thrustmaster product according to applicable laws of the

country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if

no such action exists in the corresponding country, then the warranty period shall be one (1) year from

the original date of purchase of the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months

from the date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact Technical

Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be

returned to its place of purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s

option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster

product is subject to such reconditioning, any period of at least seven (7) days during which the

product is out of use shall be added to the remaining warranty period (this period runs from the date of

the consumer’s request for intervention or from the date on which the product in question is made

14/16

available for reconditioning, if the date on which the product is made available for reconditioning is

subsequent to the date of the request for intervention). If permitted under applicable law, the full

liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return

to working order or the replacement of the Thrustmaster product. If permitted under applicable law,

Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered

damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any

other cause unrelated to a material or manufacturing defect (including, but not limited to, combining

the Thrustmaster product with any unsuitable element, including in particular power supplies,

rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2)

in the event of failure to comply with the instructions provided by Technical Support; (3) to software,

said software being subject to a specific warranty; (4) to consumables (elements to be replaced over

the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (5) to

accessories (cables, cases, pouches, bags, wrist-straps, for example); (6) if the product was sold at

public auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her

country are not affected by this warranty.

Additional warranty provisions