Aeg-Electrolux 65557G-M Руководство пользователя

CZ

65857 G-M

instruction booklet gas hob

RO

65557 G-M

Варочные панели

Pуководство по эксплуатации

EN

manual de instrucţiuni

plită încorporată

RU

Plynová varná deska

Návod k použití

2

3

4

Important Safety Information ............................................................................................................................ 5

Operation..................................................................................................................................................................... 7

Using the hob correctly .........................................................................................................................................8

Cleaning and Maintenance.................................................................................................................................. 9

Guarantee ................................................................................................................................................................ 19

For the User

For the Installer

Technical data ......................................................................................................................................................... 11

Installation ............................................................................................................................................................... 13

Adaptation to different types of gas ............................................................................................................ 15

Electrical Connection .......................................................................................................................................... 16

Building In................................................................................................................................................................ 17

Possibilities for insertion .................................................................................................................................... 18

Contents

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

)

Guide to Use the instructions

This appliance complies with the following E.E.C. Directives:

••

• 2006/95

(Low Voltage Directive);

••

• 89/336 (Electromagnetical Compatibility Directive);

••

•

90/396 (Gas Appliances);

••

• 93/68 (General Directives) and subsequent modifications.

.

It is very important that this instruction book should be kept safely for future consultation. If

the appliance should be sold or given to another person, please ensure that the booklet goes

together with it, so that the new owner can know of the functions of the machine and also

be aware of the warnings.

These instructions are only for the countries stated by the symbol printed on the front cover

of this instruction book.

5

Installation

z The work of installation must be carried out

by competent and qualified installers

according to the regulations in force.

• Any modifications to the domestic

electrical mains which may be necessary for

the installation of the appliance should be

carried out only by competent personnel.

During Operation

• This appliance has been designed for non

professional purpose in private houses only.

It is meant to cook edible foodstuff only and

must not be used for any other purposes.

• It is dangerous to alter the specification in

any way.

• For hygiene and safety reasons, this

appliance should be kept clean at all times.

A build-up of fats or other foodstuff could

result in a fire.

• Under no circumstances should you

attempt to repair the appliance yourself.

Repairs carried out by unexperienced

persons may cause injury or serious

malfunctioning. Refer to your local Service

Centre. Always insist on genuine spare

parts.

• Ensure that all control knobs are in the OFF

position when not in use.

• Should you connect any electrical tool to a

plug near this cooking appliance, ensure

that electric cables are not in contact with

it and keep them far enough from the

heated parts of this appliance.

English

This warnings has been given for the safety of you and others. We therefore ask you to

carefully read the procedures of installing and using this cooker.

Important safety information

• If the appliance is out of order, disconnect it

from the electric supply.

Child Safety

• This appliance has been designed to be

operated by adults and children under

supervision. Young children must not be

allowed to tamper with the controls or play

near or with the oven.

• This appliance is not intended for use by

children or other persons whose physical,

sensory or mental capabilities or lack of

experience and knowledge prevents them

from using the appliance safely without

supervision or instruction by a responsible

person to ensure that they can use the

appliance safely.

• Accessible parts of this appliance may

become hot when it is in use. Children

should be kept away until it has cooled.

About Installation, Cleaning and

Manteinance

z It is mandatory that all operations required

for the installation are carried out by a

qualified or competent person, in

accordance with existing rules and

regulations.

• Disconnect the appliance from the

electrical supply, before carrying out any

cleaning or manteinance work.

• Ensure a good ventilation around the

appliance. A poor air supply could cause

lack of oxygen.

• Ensure that the gas supply complies with

the gas type stated on the identification

label, placed near the gas supply pipe.

6

• This appliance is not connected to a

combustion products evacuation device. It

must be installed and connected in

accordance with current installation

regulations. Particular attention shall be

given to the relevant requirements

regarding ventilation.

• The use of a gas cooking appliance results

in the production of heat and moisture in

the room in which it is installed. Ensure

that the kitchen is well ventilated: keep

natural ventilation holes open or install a

mechanical ventilation device

(mechanical extractor hood).

• Prolonged intensive use of the appliance

may call for additional ventilation, for

example opening of a window, or more

effective ventilation, for example

increasing the level of mechanical

ventilation where present.

• Once you removed all packaging from the

appliance, ensure that it is not damaged

and the electric cable is in perfect

conditions. Otherwise, contact your dealer

before proceeding with the installation.

• The manufacturer disclaims any

responsability should all the safety

measures not be carried out.

Service

• Under no circumstances should you

attempt to repair the appliance yourself.

Repairs carried out by unexperienced

persons may cause injury or serious

malfunctioning. Refer to your local Service

Centre. Always insist on genuine spare

parts.

Environmental Information

z After installation, please dispose of the

packaging with due regard to safety and

the environment.

• When disposing of an old appliance, make

it unusable, by cutting off the cable.

The symbol

on the product or

on its packaging indicates that this product

may not be treated as household waste. Instead

it shall be handed over to the applicable

collection point for the recycling of electrical

and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for

the environment and human health, which

could otherwise be caused by inappropriate

waste handling of this product. For more

detailed information about recycling of this

product, please contact your local city office,

your household waste disposal service or the

shop where you purchased the product.

7

Operation

Hob burner control knobs

The symbols on the knobs mean:

z = no gas supply

= maximum gas supply

= minimum gas supply

For easier lighting, proceed before

putting a pan on the pan support.

Lighting the burners

To light a burner, turn the relevant knob

anticlockwise to maximum position ( )

and push down the knob to ignite.

After lighting the flame, keep the knob

pushed down for about 5 seconds. This will

allow the "thermocouple" (Fig. letter D) to be

heated and the safety device to be switched

off, otherwise the gas supply would be

interrupted. Then, check the flame is regular

and adjust it as required.

If you cannot light the flame even after

several attempts, check the "cap" and

“crown” are in the correct position.

In the absence of electricity, ignition can

occur without the electrical device; in this

case approach the burner with a flame, push

the relevant knob down and turn it anti-

clockwise until it reaches the "maximum"

position.

To switch off burners

To put the flame out, turn the knob to the

symbol (z).

Take care when frying food in hot oil

or fat, as the overheated splashes

could easily ignite.

When switching on the mains, after

installation or a power cut, it is quite

normal for the spark generator to be

activated automatically.

)

Do not keep the control knob pressed for

more than 15 seconds.

If the burner does not light even after 15

seconds, release the control knob, turn it

the "off" position and wait for at least

one minute before trying to light the

burner again.

If the burner accidentally goes out, turn

the control knob to the "off" position

and wait for at least 1 minute before

trying to light the burner again.

Each control knob is equipped with a

pilot light which gradually lights up

according to the heat level that you

select with the control knob.

8

Using the hob correctly

Practical hints

The burners

To ensure maximum burner efficiency,

you should only use pots and pans with a flat

bottom fitting the size of the burner used.

Triple Crown Burner

diameter 18-26 cm

Rapid Burner

diameter 18-26 cm

Front Semi-rapid Burner

diameter 12-18 cm

Rear Semi-rapid Burner

diameter 12-22 cm

Auxiliary Burner

diameter 8-16 cm

• For easier lighting, proceed before putting

a pan on the pan support.

• Use only pans or pots with flat bottom.

• Take care when frying food in hot oil or

fat, as the overheated splashes could

easily ignite.

• If you use a saucepan which is smaller than

the recommended size, the flame will

spread beyond the bottom of the vessel,

causing the handle to overheat.

• Prolonged cooking with potstones,

earthenware pans or cast-iron plates is

inadvisable. Also, do not use aluminium

foil to protect the top during use.

• Make sure pots do not protrude over the

edges of the cooktop and that they are

centrally positioned on the rings in order to

obtain lower gas consumption.

• Do not place unstable or deformed pots on

the rings: they could tip over or spill their

contents, causing accidents.

• Pots must not enter the control zone.

• If the control knobs become difficult to

turn, please contact your local Service Force

Centre.

• As soon as a liquid starts boiling, turn down

the flame so that it will barely keep the

liquid simmering.

9

Cleaning and Mainteinance

Disconnect the appliance from the

electrical supply, before carrying out

any cleaning or manteinance work.

The hob is best cleaned whilst it is

still warm, as spillage can be

removed more easily than if it is left

to cool.

This appliance cannot be cleaned

with steam or with a steam cleaning

machine.

The burners

z The burner caps and crowns can be

removed for cleaning.

z Wash the burners taps and crowns using

hot soapy water, and remove marks with

a mild paste cleaner. A well moistened

soap impregnated steel wool pad can be

used with caution, if the marks are

particularly difficult to remove.

z After cleaning, be sure to wipe dry with a

soft cloth.

z Frequently wash the "caps" and the

"crowns" with hot soapy water, carefully

taking away any built-up of food.

The pan supports

z After cleaning, make sure that the pan

supports are correctly positioned.

z To make burners work properly, ensure

that pan supports are placed in a way

that the arms are centred upon the

burner as shown in the picture.

z Pay attention when replacing the pan

supports in order to avoid damaging

the hob top.

NO

YES

10

The Hob Top

z Regularly wipe over the hob top using a

soft cloth well wrung out in warm water

to which a little wasing up liquid has

been added. Avoid the use of the

following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-

stick saucepans;

- steel wool pads;

- bath/sink stain removers.

z Should the hob top become heavily

soiled, the following products are

recommended:

- For stainless steel hobs use a

proprietary stainless steel cleaner.

- For other hobs use Hob Brite or Bar

Keepers Friend.

z Do not leave acid or alkaline substances

(e.g. vinegar, salt, lemon juice, etc.) on

the cooktop.

The Ignition electrode

The electric ignition is obtained through

a ceramic electrode with a metal electrode

(Fig - C). Keep these components very clean,

to avoid difficult lighting, and check that the

burner crown holes (Fig - B) are not

obstructed.

A - Burner cap

B - Burner crown

C - Ignition candle

D - Thermocouple

A

B

D

C

Triple Crown Burner

( Mod. 65857 G-M)

11

Technical data

Burner gas power (natural gas 20 mbar)

Triple crown burner (65857 G-M) 4,0kW

Rapid burner (65557 G-M) 3,0 kW

Semi-rapid burner 2,0 kW

Auxiliary burner 1,0 kW

Category II2H3B/P

Gas supply natural gas G20 (2H) 20 mbar

Gas connection G 1/2"

Electric supply 230 V ~ 50 Hz

Appliance class 3

Hob dimensions

Width 594 mm

Depth 510 mm

Cut out dimensions

Width 560 mm

Depth 480 mm

By-pass diameters

Burner Ø By-pass in 1/100 mm.

Auxiliary 28

Semi-rapid 32

Rapid

(65557 G-M)

42

Triple crown

(65857 G-M) 56

12

Gas burners

NORMAL REDUCED

NORMAL

POWER POWER

POWER

BURNER NATURAL GAS LPG

G20 (2H) - 20 mbar

(Butane/Propane) 30 mbar

kW kW g/h

inj. m

3

/h inj.

G30 G31

100/mm 100/mm

Auxiliary

burner 1,0 0,33 70 0,095 50 73 71

Semi-rapid

burner 2,0 0,45 96 0,190 71 145 143

Rapid 3,0

burner (natural gas) 0,75 119 0,285 86 204 200

(65557 G-M) 2,8

(

LPG

)

Triplecrown

burner 4,0 1,2 146 0,381 98 291 286

(65857 G-M)

Gas burners G20 13 mbar - only Russia

NORMAL REDUCED

NORMAL

POWER POWER

POWER

BURNER

NATURAL GAS

G20 - 13 mbar

kW kW inj. m

3

/h

100/mm

Auxiliary

burner 0,9 0,33 80 0,095

Semi-rapid

burner 1,4 0,45 105 0,148

Rapid

burner

( 65557 G-M) 1,9 0,75 120 0,201

Triple crown

burner 3,0 1,2 147 0,318

(65857 G-M)

13

z The following instructions about

installation and maintenance must be

carried out by qualified personnel in

compliance with the regulation in force.

l The appliance must be electrically

disconnected before all interventions. If any

electric supply to the appliance is required

to carry out the work, ensure all the

necessary precautions are followed.

l The side walls of the unit in which the hob

is going to be installed, must not exceed

the height of the working top.

l Avoid installing the appliance in the

proximity of inflammable materials (e.g.

curtains, tea towels etc.).

THE MANUFACTURER WILL NOT ACCEPT

LIABILITY, SHOULD ANY OF THE OTHER

SAFETY INSTRUCTIONS INCORPORATED IN

THIS BOOKLET OR THE REGULATION IN

FORCE BE IGNORED.

Installation

ramp by means of a threaded nut G 1/2". In-

terpose the sealing between the components

as shown in figure. Screw the parts without

forcing, adjust the connection in the required

direction and tighten everything.

Connection using flexible nonmetal pipes

When the connection can be easily inspected

in its full extent, there is the chance to use a

flexible pipe according to the rules in force.

The flexible pipe must be tightly fixed using

clamps according to the rules in force.

Liquid gas

: :

: use the rubber pipe holder «D» .

Always insert the gasket «B». Then proceed

with the gas connection. The flexible pipe

should be made ready for use in such a way

that:

- nowhere it can reach overtemperature,

other than room temperature, higher than

30°C; if the flexible pipe, to reach the cock,

must run behind the range, it must be

installed as shown in picture;

- it is no longer than 1500 mm;

- it shows no throttles;

- it is not subject to traction or torsion;

- it doesn't get in touch with cutting edges

or corners;

-it can be easily inspected in order to check

its condition.

The control of preservation of the flexible pipe

consistsin checking that:

- it doesn't show cracks, cuts, marks

of burnings bothon the end parts and

on its full extent;

- the material is not hardened, but

shows its normal elasticity;

- the fastening clamps are not rusted;

Choose fixed connections or use a

flexible pipe instainless steel in

compliance with the regulation in force.

If using flexible metallic pipes, be

careful they do not come in contact with

mobile parts or they are not squeezed.

Use the same attention when the hob

is combinated with an oven.

IMPORTANT - To ensure a correct operation,

a savingof energy and the long life of the

appliance, the voltage pressure of the

appliance must correspond to the

recommended values. The adjustable

connection is fixed to the comprehensive

Gas connection

14

- expiry term is not due.

If one or more abnormalities are seen, do not

repair the pipe, but replace it.

IMPORTANT

Once installation is complete, check

the perfectseal of every pipe fitting,

using a soapy solution, never a flame.

A) Ramp with ending nut

B) Seal

C) Adjustable connection

D) Rubber pipe holder for liquid gas

D

Natural gas

Liquid gas

15

Adaptation to different types of gas

A. Injectors replacement

• Remove the pan supports.

• Remove the burner's caps and crowns.

• With a socket spanner 7 unscrew and

remove the injectors (Fig. 1), and replace

them with the ones required for the type

of gas in use (see table: Gas Burners).

• Reassemble the parts, following the same

procedure backwards.

• Replace the rating label (placed near the

gas supply pipe) with the relevant one for

the new type of gas supply. You can find

this label in the package of the injectors

supplied with the appliance.

Should the feeding gas pressure be

different or variable compared with the

required pressure, an appropriate pressure

adjuster must be fitted on the gas supply

pipe, in compliance with the rules in force.

B. Adjustment of minimum level

To adjust the minimum level of the

burners, proceed as follows:

• Light the burner.

• Turn the knob on the minimum position.

• Remove the knob.

• With a thin screwdriver, adjust the by-

pass screw positioned in the centre of the

gas tap control shaft (see Fig. 2). If

changing from natural gas 20 mbar and

13 mbar to liquid gas, completely tighten

the adjustment screw in. If changing

from liquid gas to natural gas 20 mbar,

undo the by-pass screw about 1/4 of a

turn. If changing from natural gas 20

mbar to natural gas 13 mbar undo the

by-pass screw about 1/4 of a turn. If

changing from liquid gas to natural gas

13 mbar, undo the by-pass screw about

3/4 of a turn.

• Finally check the flame does not go out

when quickly turning the knob from the

maximum position to the minimum

position.

)

This procedure can easily be carried out,

anyhow the hob has been positioned or built

in the working top.

Minimum adjustment screw

Fig. 1

Fig. 2

16

The appliance is designed to be

connected to 230 V monophase electricity

supply.

The connection must be carried out in

compliance with the laws and regulations in

force.

Before the appliance is connected:

1) check that the main fuse and the

domestic installation can support the load

(see the rating label);

2) check that the power supply is properly

earthed in compliance with the current rules;

3) check the socket or the double pole

switch used for the electrical connection can

be easily reached with the appliance built in

the forniture unit.

The appliance is supplied with a

connection cable. This has to be provided

with a proper plug, able to support the load

marked on the identification plate. To

connect the plug to the cable, follow the

recommendation given in Fig. 3a. The plug

has to be fitted in a proper socket.

If connecting the appliance directly to

the electric system, it is necessary that you

install a double pole switch between the

appliance and the electricity supply, with a

minimum gap of 3 mm. between the switch

contacts and of a type suitable for the

required load in compliance with the current

rules.

The connection cable has to be placed in

order that, in each part, it cannot reach a

temperature 50°C higher than room

temperature.

The brown coloured phase cable (fitted in

the terminal block contact marked with "L")

must always be connected to the network

phase.

Electrical Connection

Remplacement of the voltage cable

The connection of the voltage cable to

the appliance's terminal block is of type "Y".

This means that its replacement requires the

specific equipment of a technician. In this

case, only cable type H05V2V2-F T90 must be

used. The cable section must be suitable to

the voltage and the working temperature.

The yellow/green earth wire must be

approximately 2 cm. longer than the phase

wires (Fig. 3-a).

To open the terminal block and

reach the terminals, proceed as

follows:

z insert the point of a screwdriver into

the visible protrunding part of the

terminal block;

z exert a light pressure and lift (Fig. 3-

b)

Fig. 3-b

Earth

(yellow/green)

Neutral

Fig. 3-a

Phase

17

Building In

These hobs can be inserted in a built-in

kitchen unit whose depth is between 550 and

600 mm. The hobs dimensions are shown in

Fig. 4.

The edge of the cut out must have a

minimum distance from the rear wall of 55

mm.

If there are side walls, or sides of the

furniture unit near the hob, the cut out

edges must have a minimum distance of 165

mm.

Hanging forniture units or hoods must be

placed at 650 mm. minimum from the hob.

Fitting the hob to the worktop

Carry out the building in of the hob as

follows:

1. Place the seals supplied with the hob on

the front edge of the cut out. Then, place

them at 11 mm from the side edges and

at 10 mm from the rear edge, as shown in

the diagram, taking care that the seals

meet without overlapping.

A = Auxiliary burner

SR = Semi-rapid burner

R = Rapid burner

TC = Triple Crown burner

Fig. 5

Dimensions are given in millimeters

R

SR

A

SR

510

594

TC

SR

A

SR

510

594

65557 G-M

65857 G-M

Fig. 4

18

Possibilities for insertion

Kitchen unit with door

Proper arrangements must be taken in

designing the forniture unit, in order to avoid

any contact with the bottom of the hob

which can be heated when it is operated. The

recommended solution is shown in Fig. 8. The

panel fitted under the hob should be easily

removable to allow an easy access if a

technical assistance intervention is needed.

Kitchen unit with oven

The hob recess dimensions must comply

the indication given in Fig. 5 and must be

provided with brackets to allow a continuous

supply of air. To avoid overhating, the

building in should be carried out as shown in

Figs. 9 e 10. The hob's electric connection and

the oven's one must be carried out

separately, both for safety reasons and to

allow the oven to be easily taken off the unit.

a) Removable panel

b) Space for connections

Fig. 8

Fig. 9

Fig. 10

Fig. 6

Fig.7

a

a) seal

2. Place the hob in the cut out, taking care

that it is centred.

3. Fix the hob with the relevant fixing

clamps, supplied with the injectors kit

(see diagram). When the screws have

been tightened, the excess seal can be

removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

19

This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user

manual, for the period specified in the appliance guarantee or otherwise by law. If you move from

one of these countries to another of the countries listed below the appliance guarantee will move

with you subject to the following qualifications:

• The appliance guarantee starts from the date you first purchased the appliance which will be

evidenced by production of a valid purchase document issued by the seller of the appliance.

• The appliance guarantee is for the same period and to the same extent for labour and parts as

exists in your new country of residence for this particular model or range of appliances.

• The appliance guarantee is personal to the original purchaser of the appliance and cannot be

transferred to another user.

• The appliance is installed and used in accordance with instructions issued by Electrolux and is

only used within the home, i.e. is not used for commercial purposes.

• The appliance is installed in accordance with all relevant regulations in force within your new

country of residence.

The provisions of this European Guarantee do not affect any of the rights granted to you by law.

European guarantee

20

Страница загружается ...

Aeg-Electrolux 65557G-M Руководство пользователя

Это руководство также подходит для

Aeg-Electrolux 65557G-M Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов