Yamaha RY9 Руководство пользователя

OWNER’S MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

RHYTHM PROGRAMMER

This product utilizes batteries or an external

power supply (adapter). DO NOT connect this

product to any power supply or adapter other

than one described in the manual, on the

name plate, or specifically recommended by

Yamaha.

WARNING: Do not place this product in a

position where anyone could walk on, trip over,

or roll anything over power or connecting cords

of any kind. The use of an extension cord is

not recommended! IF you must use an

extension cord, the minimum wire size for a 25'

cord (or less) is 18 AWG. NOTE: The smaller

the AWG number, the larger the current

handling capacity. For longer extension cords,

consult a local electrician.

This product should be used only with the

components supplied or; a cart, rack, or stand

that is recommended by Yamaha. If a cart,

etc., is used, please observe all safety

markings and instructions that accompany the

accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is

believed to be correct at the time of printing.

However, Yamaha reserves the right to change

or modify any of the specifications without

notice or obligation to update existing units.

This product, either alone or in combination

with an amplifier and headphones or

speaker/s, may be capable of producing sound

levels that could cause permanent hearing

loss. DO NOT operate for long periods of time

at a high volume level or at a level that is

uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult

an audiologist.

IMPORTANT: The louder the sound, the

shorter the time period before damage occurs.

Some Yamaha products may have benches

and / or accessory mounting fixtures that are

either supplied with the product or as optional

accessories. Some of these items are

designed to be dealer assembled or installed.

Please make sure that benches are stable and

any optional fixtures (where applicable) are

well secured BEFORE using.

Benches supplied by Yamaha are designed for

seating only. No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of

knowledge relating to how a function or effect

works (when the unit is operating as designed)

are not covered by the manufacturer’s

warranty, and are therefore the owners

responsibility. Please study this manual

carefully and consult your dealer before

requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are

both user safe and environmentally friendly.

We sincerely believe that our products and the

production methods used to produce them,

meet these goals. In keeping with both the

letter and the spirit of the law, we want you to

be aware of the following:

Battery Notice:

This product MAY contain a small non-

rechargeable battery which (if applicable) is

soldered in place. The average life span of this

type of battery is approximately five years.

When replacement becomes necessary,

contact a qualified service representative to

perform the replacement.

This product may also use “household” type

batteries. Some of these may be

rechargeable. Make sure that the battery being

charged is a rechargeable type and that the

charger is intended for the battery being

charged.

When installing batteries, do not mix batteries

with new, or with batteries of a different type.

Batteries MUST be installed correctly.

Mismatches or incorrect installation may result

in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate

any battery. Keep all batteries away from

children. Dispose of used batteries promptly

and as regulated by the laws in your area.

SPECIAL MESSAGE SECTION

PDF01_E.qx 6/2/99 5:42 PM Page 2

Note: Check with any retailer of household

type batteries in your area for battery disposal

information.

Disposal Notice:

Should this product become damaged beyond

repair, or for some reason its useful life is

considered to be at an end, please observe all

local, state, and federal regulations that relate

to the disposal of products that contain lead,

batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the

product. The model number, serial number,

power requirements, etc., are located on this

plate. You should record the model number,

serial number, and the date of purchase in the

spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

ON STANDBY

OUTPUT

MIDI

EXT IN DC IN

L/MONO

OUT IN

R

PLEASE KEEP THIS MANUAL

92-BP

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the

product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure

to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of

assurance that your use of this product in a residential environment will not result in harmful interference with

other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may cause interference harmful to the operation of

other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur

in all installations. If this product is found to be the source of interference, which can be determined by turning

the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation

of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its

subsidiaries.

PDF01_E.qx 6/2/99 5:42 PM Page 3

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious

injury or even death from electrical shock, short-circuiting, damages, fire or other

hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument

contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have

it inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it

containing liquids which might spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the

instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power

switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualified Yamaha service

personnel.

• Use the specified adaptor (PA-3B or an equivalent recommended by Yamaha) only. Using the wrong adaptor can

result in damage to the instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from the outlet. Never insert or remove an electric

plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical

injury to you or others, or damage to the instrument or other property. These

precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or

otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip

over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower

sound quality, or possibly cause overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during electrical storms.

• Always make sure all batteries are inserted in conformity with the +/- polarity markings. Failure to do so might

result in overheating, fire, or battery fluid leakage.

• Always replace all batteries at the same time. Do not use new batteries together with old ones. Also, do not mix

battery types, such as alkaline batteries with manganese batteries, or batteries from different makers, or different

types of batteries from the same maker, since this can cause overheating, fire, or battery fluid leakage.

• Do not dispose of batteries in fire.

I

(4)-5

PDF01_E.qx 6/2/99 5:42 PM Page 4

• Do not attempt to recharge batteries that are not intended to be charged.

• If the instrument is not to be in use for a long time, remove the batteries from it, in order to prevent possible fluid

leakage from the battery.

• Keep batteries away from children.

• Before connecting the instrument to other electronic components, turn off the power for all components. Before

turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually raise the volume controls while playing the instrument to

set the desired listening level.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight,

near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal

components.

• Do not use the instrument near other electrical products such as televisions, radios, or speakers, since this might

cause interference which can affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might accidentally fall over.

• Before moving the instrument, remove all connected adaptor and other cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or

chemical-impregnated wiping cloths. Also, do not place vinyl, plastic or rubber objects on the instrument, since

this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the

buttons, switches or connectors.

• Do not operate the instrument for a long period of time at a high or uncomfortable volume level, since this can

cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

DATA BACK-UP AND STORAGE

■ Yamaha recommends that you regularly save your music data using an external MIDI data storage device (such as

the Yamaha MDF3 MIDI Data Filer), and storing the floppy disks in a safe, cool, dry place. YAMAHA CANNOT BE

HELD RESPONSIBLE FOR THE ACCIDENTAL LOSS OF IMPORTANT MUSIC DATA! Regarding the User memory,

as long as fresh batteries are inserted in (or an AC power adaptor is connected to) the RY9, the User pattern, song

and drum kit data will be retained, even when the power is turned off. It will also be retained long enough to

exchange an old set of batteries for a new set. If you have important data in the RY9 which you don’t want to lose,

please take care to keep fresh batteries inserted in (or keep an AC power adaptor connected to) the RY9, and to

regularly save it to an external MIDI data storage device.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or

data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Make sure to discard used batteries according to local regulations.

II

English

01_IntroE.qx 7/2/99 6:02 PM Page 5

THANK YOU FOR PURCHASING

THE YAMAHA RY9 RHYTHM PROGRAMMER.

The Yamaha RY9 is a full-featured, high quality, low-priced, hand-held stereo

rhythm programmer with accompaniment backing and guitar input that’s the

perfect “pocket pal” for the guitarist on the go.

With its compact size, friendly user interface, wide variety of preprogrammed

patterns and songs, user programming capabilities, versatile MIDI features and

more, the handy RY9—which easily slips into a guitar case or gig bag—is

ready to plug and play anytime and anywhere. It’s the ideal music practicing

companion and composing sketch pad.

Whether you’re a professional or amateur guitarist, a serious songwriter or

simply a music hobbyist, you’ll find the RY9 a unique and powerful addition to

your arsenal of music tools. You’ll be surprised by its full, dynamic stereo

sound quality when played through a high quality audio monitoring system.

You’ll also appreciate being able to plug in a guitar and headphones and work in

privacy without disturbing others—or better yet, without others disturbing you!

To take full advantage of the RY9’s many features and music making

capabilities, please read this owner’s manual carefully to familiarize yourself

with the proper operating procedures. Also, keep this manual in a safe place

for future reference.

III

PDF01_E.qx 6/2/99 5:42 PM Page 6

CONVENTIONS USED IN THIS MANUAL.

In order to keep confusion to a minimum, there are a few basic conventions

used in the feature explanations in this manual, as follows:

■ Names of key features are written in the cap-low style; e.g., Pattern Mode,

Song Record Mode, System Mode Sync function, User patterns, etc.

■ Names of controls and connectors are written in all-caps within brackets;

e.g., [EXT IN] jack, [VOLUME] slider, [DELETE] button, etc.

■ Special prompts or words which appear on the LCD screen during operation

are written in quotes; e.g., “NEXT”, “CHAIN”, “accnt”, “COPY SURE?”, etc.

■ Everything else will be written in the lower case style.

PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE !

IV

PDF01_E.qx 6/2/99 5:42 PM Page 7

HOW TO USE THIS MANUAL.

The RY9 Owner’s Manual is designed to travel alongside the RY9 itself. It

includes information about all the RY9’s features and operation procedures,

organized in such a way as to permit quick and easy access to any feature you

need to locate. The main sections of the Owner’s Manual are as follows:

BEFORE YOU BEGIN

A brief overview of the RY9’s capabilities and system structure, as well as

descriptions of all panel features—everything you need to know before you

begin using the RY9 in order to put its many features and capabilities into

proper context.

GETTING STARTED

A step-by-step guide through setting up the RY9, turning on the power, playing

the demo songs and performing basic pattern, song and drum kit operations—

everything you need to get started enjoying the RY9 right away.

MODES & FUNCTIONS

An extensive feature reference of the various modes and functions of the

RY9—everything you need to know about all operating procedures.

APPENDIX

A collection of technical charts and lists including display messages,

troubleshooting, drum voice and pattern lists, MIDI implementation chart and

more.

INDEX

An alphabetical list of topics which gives you quick and easy access to any

subject in the manual you want to locate.

The illustrations and LCD screens as shown in this owner’s manual are for

instructional purposes only, and may appear somewhat different from those on

your instrument.

V

PDF01_E.qx 6/2/99 5:42 PM Page 8

BEFORE YOU BEGIN..............................................2

1. THE RY9 ................................................................2

2. RY9 SYSTEM STRUCTURE ......................................4

3. TOP PANEL ............................................................7

4. SIDE & REAR PANELS ..........................................10

GETTING STARTED ..............................................12

5. SETUP & POWER-ON ............................................12

6. PLAYING THE DEMO SONG....................................18

7. PLAYING THE DRUM PADS ....................................19

8. PLAYING THE PRESET PATTERNS ..........................21

9. PLAYING THE PRESET SONGS ..............................26

MODES & FUNCTIONS ........................................30

10. PATTERN MODE ..................................................30

11. SONG MODE ......................................................41

12. DRUM KIT MODE ................................................54

13. EXTERNAL IN MODE ..........................................61

14. SYSTEM MODE ..................................................67

15. TEMPO MODE ....................................................73

16. MUTE MODE ......................................................74

17. BALANCE MODE ................................................75

18. TRANSPOSE MODE ............................................76

APPENDIX ..........................................................77

19. RECALLING THE FACTORY DEFAULT SETTINGS ....77

20. DISPLAY MESSAGES ..........................................78

21. TROUBLESHOOTING............................................79

22. SPECIFICATIONS ................................................81

23. INDEX ................................................................82

24. LISTS & CHARTS ................................................84

1

BEFORE YOU BEGIN

GETTING STARTEDMODES & FUNCTIONSAPPENDIX

PDF02_E.qx 6/2/99 5:47 PM Page 1

1. THE RY9

The RY9 is an easy-to-use yet powerful rhythm programmer with automatic

bass and chord accompaniment backing, an external input for playing along

using a guitar, versatile MIDI capabilities and much more.

Featuring Yamaha’s exclusive AWM (Advanced Wave Memory) tone generation

technology—where voices are high quality digital samples of actual

instruments—the RY9 has a large capacity waveform ROM filled with 128

“drum” voices for the rhythms, and 50 “normal” voices for the backings, plus

200 Preset rhythm patterns with matching accompaniment backing

encompassing many different popular music styles, and 50 Preset songs and

12 Preset drum kits suitable for any type of music situation. The RY9 also

features powerful programming capabilities that let you do the following:

Create Your Own Rhythm Patterns

Record your own one-measure User patterns in step-time or real-time. You can

assign any of the preprogrammed backing accompaniments—consisting of

Bass, Chord 1 and Chord 2 tracks—to your rhythm.

Create Your Own Songs

String together a series of Preset and User patterns to create your own User

song—complete with chord progressions as you specify.

Create Your Own Drum Kits

Assign drum voice sounds to the pads to create your own User drum kits—

complete with drum voice pan positioning, pitch tuning and more.

2

BEFORE YOU BEGIN

PDF02_E.qx 6/2/99 5:47 PM Page 2

The RY9’s many other features include song chaining and loop repeating,

rhythm “swing” function for a realistic human feeling, guitar tuner and guitar

synthesizer, 28-note polyphony, stereo outputs, headphone jack, and a large

LCD screen which always lets you know what mode and status you’re currently

in. Hence, the RY9 is the ideal music tool that’s useful in practically any music

situation. You can use it as:

A Practicing Companion

Plug a guitar directly into the RY9 and play along with the patterns and songs.

Mute one or more of the accompaniment tracks, or turn the backing off

entirely and play along with the rhythm only. The RY9 provides just the music

you need for a hot practice session.

A Music Sketch Pad

String together a series of Preset and User rhythm patterns, designate a

backing accompaniment, and specify the chord progressions for a song idea.

Creating your own songs is quick and easy with the RY9’s user-friendly

interface.

A Powerful Drum Machine

Program professional sounding rhythm patterns by Step or Realtime recording,

complete with accent dynamics and “swing” factor for a realistic human feel.

Whether you modify a preset or create your own rhythm pattern from scratch,

the RY9’s auto-quantizing makes sure your rhythms are always on the beat.

A Guitar Synthesizer

Plug a guitar directly into the RY9 and “trigger” AWM normal voices (including

acoustic piano, strings, brass, synth pad sounds and more) in real-time with

the notes you play on the guitar. You can specify the RY9 to “synthesize” any

of the 50 normal voices as single notes, octaves, harmonies and more—in

order to create interesting and unique sound textures.

A MIDI Tone Generator

Connect an external MIDI keyboard or sequencer in order to play the RY9’s

AWM drum voices. You can specify the note table by which the different voices

will be sounded.

3

BEFORE YOU BEGIN

PDF02_E.qx 6/2/99 5:47 PM Page 3

BEFORE YOU BEGIN

2. RY9 SYSTEM STRUCTURE

The RY9 is primarily a powerful rhythm programmer, but with the added

dimension of automatic backing accompaniment, song programming capability

and a guitar synthesizer.

The key components that make up the RY9’s operating system are the AWM

voices, the drum kits, the patterns, and the songs. The main operating modes

are Pattern Mode and Song Mode, each of which are made up of several

“functions”. Additional modes include Drum Kit Mode, External In Mode,

System Mode, Tempo Mode, Mute Mode, Balance Mode and Transpose Mode.

External In

50 Preset Songs (00~49) 50 User Songs (50~99)

Chord Track

200 Preset Patterns (001~199) 50 User Patterns (200~249)

Preset Pattern A~D

Backing : Chord 1

Chord 2

Bass

User Pattern

12 Preset Drum Kits (00~11) 4 User Drum Kit (12~15)

Drum Bank Percussion Bank

12 Pads (00~11) 12 Pads (12~23)

Drum Bank Percussion Bank

12 Pads (00~11) 12 Pads (12~23)

Backing : Chord 1

Chord 2

Bass

128 Drum Voices

Preset Song User Song

Pattern Track

Chord Track

Pattern Track

Rhythm Rhythm

50 Normal Voices

4

PDF02_E.qx 6/2/99 5:47 PM Page 4

BEFORE YOU BEGIN

5

THE AWM VOICES.

There are 128 “drum” voices and 50 “normal” AWM voices. The drum voices

are assigned to the drum kits. The normal voices are assigned to the backing

accompaniments and to the guitar synthesizer.

THE DRUM KITS.

There are 12 Preset drum kits and 4 User drum kits. Although there are only

12 pads on the top panel of the RY9, each drum kit is made up of 24 drum

voices, organized in two “Pad Banks”—a “Drum Pad Bank” and a “Percussion

Pad Bank”—with 12 drum voices assigned to each Pad Bank. (You can switch

freely back and forth between Pad Banks by pressing the [PAD BANK] button.)

The various Preset drum kits are designed for different styles of music. You

can create your own User drum kits by assigning any drum voice you want to

the pads, and specifying output and accent levels, as well as pan positioning

and pitch tuning, for each pad.

THE PATTERNS.

There are 200 Preset patterns and 50 User patterns, each comprised of a one-

measure rhythm pattern. The Preset patterns are organized in 50 music styles

with “A”, “B”, “C” and “D” Sections for each style—representing both “main”

and “fill-in” type Sections.

The Preset rhythm patterns also have special Bass, Chord 1 and Chord 2

backing accompaniment tracks—matched to the music style of each respective

pattern—assigned to them. Each backing track can be turned off, or “muted”,

at will, and you can adjust the volume balance of each. If you want, you can

switch the backing off entirely.

You can create your own User rhythm patterns, and assign one of the backing

accompaniments to it.

THE SONGS.

There are 50 Preset songs and 50 User songs. The Preset songs are made up

of the Preset patterns, complete with preprogrammed chord progressions, and

are intended as music style ideas to get you started or to play along with as

they are.

You can create your own songs using Preset and/or User patterns, complete

with chord progressions that you can record in the “chord track”.

PDF02_E.qx 6/2/99 5:47 PM Page 5

BEFORE YOU BEGIN

6

THE MODES AND FUNCTIONS.

The RY9’s features are for the most part organized into nine modes accessible

by holding [MODE] and pressing one of the drum pads (the names of the

modes are printed on the various pads).

All modes except Tempo Mode and Transpose Mode contain several pages of

functions which you can select by holding [MODE] and pressing [PAGE-] and

[PAGE+].

Most routine operations can be performed from either within Pattern Mode or

Song Mode.

■ To enter Pattern Mode, hold [MODE] and press [PATTERN].

■ To enter Song Mode, hold [MODE] and press [SONG].

TOM1

BD1 BD2 SD1 SD2 CRASH

TOM2 TOM3 CLOSED1

CLOSED2

HH

OPEN

HH

RIDE

ACCENT MODE

PATTERN

PAGE PAGE MUTE BALANCE TRANS-

POSE

SONG KIT EXT IN SYSTEM TEMPO

DELETE

AUDITION

CHORD

PAD BANK

ENTER

2 3 4 510

8 9 10 1176

TOM1

BD1 BD2 SD1 SD2 CRASH

TOM2 TOM3 CLOSED1

CLOSED2

HH

OPEN

HH

RIDE

ACCENT MODE

PATTERN

PAGE PAGE MUTE BALANCE TRANS-

POSE

SONG KIT EXT IN SYSTEM TEMPO

DELETE

AUDITION

CHORD

PAD BANK

ENTER

2 3 4 510

8 9 10 1176

PDF02_E.qx 6/2/99 5:47 PM Page 6

BEFORE YOU BEGIN

3. TOP PANEL

1 LCD SCREEN

High contrast, easy-to-read Liquid Crystal Display (LCD) provides large-content

visual feedback to always let you know exactly what mode and status you’re

currently in.

2 [REC] BUTTON

For entering and exiting Pattern Record Mode and Song Record Mode. Both

Step and Realtime recording are possible.

3 [TOP] BUTTON

For returning the song or pattern location to the top, or the first measure,

when the playback is stopped.

4 [BWD] BUTTON

For rewinding the song through a series of measures when the song playback

is stopped. Pressing [BWD] in Pattern Play Mode returns the pattern measure

location to the top, or the first measure. Pressing [BWD] in Pattern Record

Mode lets you select the clock position.

TOM1

BD1 BD2 SD1 SD2 CRASH

TOM2 TOM3 CLOSED1

CLOSED2

HH

OPEN

HH

RIDE

RHYTHM PROGRAMMER

REC

ACCENT MODE

PATTERN

PAGE PAGE MUTE BALANCE TRANS-

POSE

SONG KIT EXT IN SYSTEM TEMPO

DELETE

AUDITION

CHORD

PAD BANK

TOP BWD STOP PLAY FWD

ENTER

2 3 4 510

8 9 10 1176

1

3 4

PTN

SONG

PAD

SONG

BEAT

PART

CLOCK

MEAS

KIT

REPEAT

CHAIN

MUTE

2

7

PDF02_E.qx 6/2/99 5:47 PM Page 7

BEFORE YOU BEGIN

5 [STOP] BUTTON

For stopping the song or pattern playback or realtime recording.

6 [PLAY] BUTTON

For starting song or pattern playback or realtime recording from the current

measure location. Pressing [PLAY] immediately after pressing [STOP] will

continue the song or pattern playback from the stop location. To start the song

or pattern from the beginning, or the top, press [TOP] before pressing [PLAY].

7 [FWD] BUTTON

For fast-forwarding the song through a series of measures when the song

playback is stopped. Pressing [FWD] in Pattern Play Mode returns the pattern

measure location to the top, or the first measure. Pressing [FWD] in Pattern

Record Mode lets you select the clock position.

8 [ACCENT] BUTTON

For adding an accent to a drum beat, by pressing and holding [ACCENT] while

hitting a drum pad. In Pattern Step Record Mode, you can record an accent by

simply pressing [ACCENT] at the desired drum beat clock location. You can assign

the accent level for each drum pad of a User drum kit in Drum Kit Mode.

9 [MODE] BUTTON

For accessing the various modes, by pressing and holding down [MODE] while

pressing a mode button, and for accessing the various functions within each

mode, by holding down [MODE] while pressing [PAGE-] and [PAGE+].

TOM1

BD1 BD2 SD1 SD2 CRASH

TOM2 TOM3 CLOSED1

CLOSED2

HH

OPEN

HH

RIDE

RHYTHM PROGRAMMER

REC

ACCENT MODE

PATTERN

PAGE PAGE MUTE BALANCE TRANS-

POSE

SONG KIT EXT IN SYSTEM TEMPO

DELETE

AUDITION

CHORD

PAD BANK

TOP BWD STOP PLAY FWD

ENTER

2 3 4 510

8 9 10 1176

PTN

SONG

PAD

SONG

BEAT

PART

CLOCK

MEAS

KIT

REPEAT

CHAIN

MUTE

$

5 6

8 9

!)

#@

%

^

&

7

8

PDF02_E.qx 6/2/99 5:47 PM Page 8

) [DELETE] BUTTON

For deleting individual drum beats in Pattern Record Mode. Simply hold

[DELETE] and press [ENTER] or the appropriate drum pad to delete the drum

voice at the current cursor location. When Chord Assign is active, holding

[DELETE] and pressing [ENTER] will delete the chord at the current cursor

location.

! [AUDITION] BUTTON

For “auditioning”, or checking, drum sounds in Pattern Step Record Mode

before you record a drum beat. While pressing and holding [AUDITION], press

the drum pad you want to audition and the drum voice will sound but data will

not be input.

@ [CHORD] BUTTON

For accessing Chord Assign, which lets you specify the chord root and chord

type for the backing.

# [PAD BANK] BUTTON

Although there are only 12 drum pads on the top panel, each drum kit has 24

sounds, organized in two Pad Banks of 12 voices per bank. Pressing [PAD

BANK] toggles between each bank of 12 “Drum” and 12 “Percussion” voices.

$ DRUM PADS/MODE BUTTONS

Double-function controls which act as drum pads for playing the drum voices

during playback or recording, and act as mode and function select buttons

when the [MODE] button is pressed and held. The names of the various modes

are printed on the pads. The [PAGE+] and [PAGE-] buttons let you access the

various functions within each mode. Although the drum pads are not touch

sensitive, you can apply accents to drum beats using the [ACCENT] button.

% [ENTER] BUTTON

For “confirming” or executing certain data entry operations.

^ [-1] AND [+1] BUTTONS

For specifying data, or modifying the currently selected parameters.

& [E] AND [F] BUTTONS

For moving the “flashing cursor” around the LCD screen to select the various

parameters.

9

BEFORE YOU BEGIN

PDF02_E.qx 6/2/99 5:47 PM Page 9

4. SIDE & REAR PANELS

1 [VOLUME] SLIDER

For setting the master volume output level from the [OUTPUT] and [PHONES]

jacks.

2 [PHONES] MINI JACK

For plugging in a pair of headphones with a mini stereo plug for private

listening.

3 [OUTPUT] JACKS

For connecting the RY9 to a mixer, or a stereo amplifier, or amplified speakers.

In the case of mono output, use the [L/MONO] jack.

4 [MIDI] JACKS

For connecting the RY9 to other MIDI devices such as a synthesizer or music

sequencer, or to a MIDI data storage device (or another RY9) for bulk dumping

of User song, pattern and kit data.

OUTPUT

MIDI

R

OUT IN

EXT IN DC IN

ON STANDBY

L

/

MONO

3 4 5 6 7

8

MIN VOLUME MAX PHONES

1 2

10

BEFORE YOU BEGIN

PDF02_E.qx 6/2/99 5:47 PM Page 10

5 [EXT IN] JACK

For plugging in a guitar to play along with the song or pattern playback, or for

using the guitar tuner feature, or for “triggering” any of the 50 AWM backing

instrument voices in various ways.

6 [DC IN] JACK (DC IN 12V)

For connecting an appropriate AC power adaptor (PA-3B or an equivalent

recommended by Yamaha) to supply power to the RY9.

7 [ON/STANDBY] SWITCH

This switch is for turning the power of the RY9 on and off (page 17).

Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at a

minimum level. When not using the RY9 for an extended period of time, be sure to unplug the AC

power adaptor from the wall AC outlet.

8 BATTERY COMPARTMENT

For inserting six 1.5 volt AA-size (SUM-3 or R6P) batteries to supply power to

the RY9. Be sure to remove the batteries when the RY9 is not to be used for

an extended period of time.

11

BEFORE YOU BEGIN

PDF02_E.qx 6/2/99 5:47 PM Page 11

GETTING STARTED

12

5. SETUP & POWER-ON

The RY9 can be powered by either an optional AC adaptor or six batteries.

Follow the instructions below based on the power source you intend to use.

USING A POWER ADAPTOR.

Plug the DC output cable from an optional Yamaha PA-3B AC Adaptor (available

from your Yamaha dealer) snugly into the [DC IN] jack on the rear panel, then

plug the adaptor into a convenient wall AC power outlet.

Do not attempt to use an AC adaptor other than the Yamaha PA-3B or an equivalent recommended

by Yamaha. The use of an incompatible adaptor may cause irreparable damage to the RY9, and

may even pose a serious shock hazard! ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER

OUTLET WHEN THE RY9 IS NOT IN USE.

When the AC adaptor plug is inserted into the RY9’s [DC IN] jack, the batteries are automatically

disconnected.

Regarding the User memory, as long as fresh batteries are inserted in (or an AC power adaptor is

connected to) the RY9, the User pattern, song and drum kit data will be retained, even when the

power is turned off. It will also be retained long enough to exchange an old set of batteries for a

new set. If you have important data in the RY9 which you don’t want to lose, please take care to

keep fresh batteries inserted in (or keep an AC power adaptor connected to) the RY9, and to

regularly save it to an external MIDI data storage device.

ON STANDBY

EXT IN DC IN

AC power outlet

02_GetStartE.qx 7/16/99 11:22 AM Page 12

Страница загружается...

Yamaha RY9 Руководство пользователя

Похожие модели бренда