Hotpoint LTF 11M121 EU Руководство пользователя

Operating instructions

Contents

Product Fiche, 2

Precautions, advice and Assistance, 3-4

General safety

Disposal

Saving energy and respecting the environment

Assistance

Installation, 5-6

Positioning and levelling

Connecting the water and electricity supplies

Advice regarding the first wash cycle

Technical data

Description of the appliance, 7

Overall view

Control panel

Loading the racks, 8-9

Lower rack

Cutlery basket

Upper rack

Cutlery tray

Adjusting upper rack

Start-up and use, 10

Starting the dishwasher

Measuring out the detergent

Wash cycles, 11

Table of wash cycles

Special wash cycles and Options, 12

Rinse aid and refined salt, 13

Measuring out the rinse aid

Measuring out the refined salt

Care and maintenance, 14

Shutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the water inlet filter

Cleaning the filters

Leaving the machine unused for extended periods

Troubleshooting, 15

English, 1

LTF 11M121

DISHWASHER

Русский, 16

Қазақша, 31

Product Fiche

Brand

HOTPOINT ARISTON

Model

LTF 11M121

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

A++

Energy consumption per year in kWh (2)

265.0

Energy consumption of the standard cleaning cycle in kWh

0.93

Power consumption of the off-mode in W

0.5

Power consumption of the left-on mode in W

5.0

Water consumption per year in litres (3)

2520.0

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

190’

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

Yes

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled

tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle

corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy

consumption depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Product Fiche

* Only available in selected models.

Precautions, advice and

Assistance

This appliance was designed and

manufactured in compliance with international

safety standards The following information has

been provided for safety reasons and should

therefore be read carefully.

Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given

away or moved, please ensure the manual is kept

with the machine.

Please read these instructions carefully: they

contain important information on installation, use

and safety.

This appliance is designed for domestic use or

similar applications, for example:

- staff kitchen areas in shops, offices and other

work environments;

- farmhouses;

- use by guests in hotels, motels and other

residential settings;

- bed & breakfasts.

General safety

• The appliance should not be operated by

people (including children) with reduced

physical, sensory or mental capacities, or by

inexperienced people who are not familiar with

the product, unless supervision or instructions

on how to use it are provided by someone who

assumes responsibility for their safety.

• Anadultmustsupervisechildrenatalltimesto

prevent them from playing with the appliance.

• The appliance was designed for domestic

use inside the home and is not intended for

commercial or industrial use.

• Theappliancemustbeusedbyadultsonlyto

wash domestic crockery in accordance with

the instructions in this manual.

• Theappliancemustnotbeinstalledoutdoors,

even in covered areas. It is extremely dangerous

to leave the machine exposed to rain and

storms.

• Donottouchtheappliancewhenbarefoot.

• Whenunpluggingtheappliancealwayspullthe

plug from the mains socket. Do not pull on the

cable.

• Thewatersupplytapmustbeshutoffandthe

plug should be removed from the electrical

socket before cleaning or maintaining the

appliance.

• Iftheappliancebreaksdown,donotunderany

circumstances touch the internal parts in an

attempt to perform the repair work yourself.

• Do not lean or sit on the open door of the

appliance: this may cause the appliance to

overturn.

•Thedoorshouldnotbeleftopenasitmaycreate

a dangerous obstacle.

• Keepdetergentandrinseaidoutofreachof

children.

• Thepackagingmaterialshouldnotbeusedas

a toy for children.

Disposal

• Disposalofpackagingmaterial:observelocal

legislation so that the packaging may be

reused.

• The European Directive 2012/19/EU relating

toWasteElectricalandElectronicEquipment

(WEEE) states that household appliances

should not be disposed of using the normal

solidurbanwastecycle.Exhaustedappliances

should be collected separately in order to

optimise the re-using and recycling rate of the

materials inside the machine, while preventing

potential damage to the environment and public

health. The crossed-out dustbin symbol is

marked on all products to remind the owners

of their obligations regarding separated waste

collection.

For further information relating to the correct

disposal of household appliances, owners may

contact the relevant public authority or the local

appliance dealer.

Saving energy and respecting the

environment

Saving water and energy

• Onlybeginawashcyclewhenthedishwasher

isfull.Whilewaitingforthedishwashertobe

filled, prevent unpleasant odours using the Soak

cycle

(seeWashcycles)

• Selectawashcyclethatissuitedtothetype

of crockery and to the soil level of the crockery

using the Table of wash cycles:

 -fordisheswithanormalsoillevelusetheEco

washcycle, whichensures lowenergy/water

consumption levels.

- If the load is smaller than usual activate the

Half Load option*

(see Start-up and use).

• Ifyourelectricitysupplycontractgivesdetailsof

electricity-saving time bands, run wash cycles

when electricity prices are lower. The Delayed

Start button *

(see Start-up and use)

helps you

organise the wash cycles accordingly.

Phosphate-free and chlorine-free detergents

containing enzymes

• Westronglyrecommendthatyouusedetergents

that do not contain phosphates or chlorine, as

these products are harmful to the environment.

• Enzymesprovideaparticularlyeffectiveaction

at temperatures around 50°C. As a result

detergentscontainingenzymescanbeusedin

conjunction with low-temperature wash cycles

in order to achieve the same results as a normal

65°Cwashcycle.

•To avoidwasting detergent,use theproduct

in appropriate quantities based on the

manufacturer’s recommendations, the hardness

of the water,the soil level and the quantity

of crockery to bewashed. Even if they are

biodegradable, detergents contain substances

which may alter the balance of nature.

Assistance

Before contacting Assistance:

• Checkwhethertheproblemcanberesolvedusingthe

Troubleshooting guide

(see Troubleshooting).

• Restarttheprogrammetocheckwhethertheproblem

has ceased to exist.

• If the problem persists, contact the Authorised

Technical Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• Thetypeofmalfunction.

• Theappliancemodel(Mod.).

• Theserialnumber(S/N).

This information can be found on the appliance data plate

(see Description of the appliance)

Installation

* Only available in selected models.

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto its

back.

Positioning and levelling

1.Remove the appliance from all packaging and check that

it has not been damaged during transportation. If it has been

damaged, contact the retailer and do not proceed any further

with the installation process.

2.Arrangethedishwashersothatitssidesorbackpanelarein

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop

(see the Assembly

Instruction sheet.)

3. Position the dishwasher on a level sturdy floor. If the floor

is uneven, the front feet of the appliance should be adjusted

untilitreachesahorizontalposition.Iftheapplianceislevelled

correctly, it will be more stable and much less likely to move or

cause vibrations and noise while it is operating.

*. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and in an

anticlockwise direction to decrease it

(see Building-in Instruction

sheet attached to the documentation.)

Connecting the water and electricity supplies

Connection to the water and electricity supplies should only

beperformedbyaqualifiedtechnician.

The dishwasher should not stand on the water hoses or

electricity supply cable.

The appliance must be connected to the water supply

network using new hoses.

Do not use old piping.

The water inlet and outlet hoses and the electricity supply cable

may be positioned towards the right or the left in order to achieve

the best possible installation.

Connecting the water inlet hose

• Toasuitablecoldwaterconnectionpoint:beforeattaching

the hose, run the water until it is perfectly clear so that any

impurities that may be present in the water do not clog the

appliance; after performing this operation, screw the inlet

hose tightly onto a tap with a ¾ gas threaded connection.

• Toasuitablehotwaterconnectionpoint:your dishwasher

may be supplied with hot water from the mains supply (if you

have a central heating system with radiators) provided that it

doesnotexceedatemperatureof60°C.

Screw the hose to the tap as described for connection to a

cold water supply.

If the inlet hose is not long enough, contact a specialist store

or an authorised technician

(see Assistance.)

The water pressure must be within the values indicated in

the Technical Data table

(see adjacent information.)

The hose should not be bent or compressed.

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct with

a minimum diameter of 4 cm.

Theoutlethosemustbeataheightrangingfrom40to80cm

fromthefloor/surfacewherethedishwasherrests(A).

Before connecting the water outlet hose to the sink drain, remove

the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Somemodelsarealsoequippedwiththesupplementarysafety

device New Acqua Stop*, which guarantees anti-flooding

protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut, as

it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make sure

that:

• Thesocketisearthedandcomplieswithcurrentregulations.

• thesocketcanwithstandthemaximumloadoftheappliance,

which is indicated on the data plate located on the inside of

the door

(see Description of the appliance);

• Thepowersupplyvoltagefallswithinthevaluesindicatedon

the data plate on the inside of the door.

• Thesocketiscompatiblewiththeplugoftheappliance.If

this is not the case, ask an authorised technician to replace

the plug (

see Assistance

); do not use extension cables or

multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced

by the manufacturer or its Technical Assistance Service in order

topreventallpotentialhazards

(see Assistance.)

Anti-condensation strip*

After installing the dishwasher, open the door and stick the

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the

retaining elastic elements from the upper rack, if any.

Immediately before the first washing, completely fill the salt

dispenserwithwaterandaddonlythenapproximately1kgofsalt

(seechapterentitledRinseaidandrefinedsalt).Thewatermay

overflow: this is normal and is not a cause for concern. Select

thewaterhardnessvalue(seechapterentitledRinseaidand

refined salt). - After the salt has been poured into the machine,

theLOWSALTindicatorlight*switchesoff.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

Technical data

Dimensions

width 59.5 cm

height 82 cm

depth 57 cm

Capacity 14 standard place-settings

Water supply

pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EC (WEEE)

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

* Only available in selected models.

Overall view

Description of the

appliance

***Only in completely built-in models.

* Only available in selected models.

The number and type of wash cycles and options may vary depending on the dishwasher model.

1. Upper rack

Upper sprayer arm

Tip-up dispensers

Rackheightadjuster

Lower rack

Lower sprayer arm

Washingfilter

8. Salt dispenser

Detergent and rinse-aid dispensers and

device Active Oxigen

10. Data plate

11. Control panel

****

Control panel

Select wash cycle button

Short Time button

and indicator light

Extra dry button and indicator light

Salt indicator light

Rinse aid indicator light

Multi-functional tablets button and indicator light

Wash cycle number and

remaining time indicator light

Delayed start button

Zone Wash button

ON-OFF/Reset button

and indicator light

Zone Wash indicator lights

Delayed start indicator light

Loading the racks

Tips

Before loading the racks, remove all food residues from the

crockeryandemptyliquids fromglassesandcontainers. No

preventive rinsing is needed under running water.

Arrange the crockery so that it is held in place firmly and does

not tip over; and arrange the containers with the openings facing

downwards and the concave/convexparts placedobliquely,

thus allowing the water to reach every surface and flow freely.

Make sure that the lids, handles, trays and frying pans do not

prevent the sprayer arms from rotating. Place any small items

in the cutlery basket.

Since plastic dishes and non-stick frying pans usually retain more

water drops, their drying will be not so good as that of ceramic

or stainless-steel dishes.

Lightweight items such as plastic containers should be placed

in the upper rack and arranged so that they cannot move.

After loading the appliance, make sure that the sprayer arms

can rotate freely.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery

etc. Large plates and lids should ideally be placed at the sides.

Very soiled dishes and pans should be placed in the lower rack

because in this sector the water sprays are stronger and allow

a higher washing performance.

Several dishwasher models are fitted with tip-up sectors

They can be used in a vertical position when arranging dishes

orinahorizontalposition(lower)toloadpansandsaladbowls

easily.

Cutlery basket

The basket is equipped withtop grillesfor improved cutlery

arrangement. The cutlery basket should be positioned only at

the front of the lower rack.

Knives and other utensils with sharp edges must be placed

in the cutlery basket with the points facing downwards or they

mustbepositionedhorizontallyinthetip-upcompartmentson

the upper rack

Upper rack

Load this rack with delicate and lightweight crockery such as

glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors

They can be usedin avertical positionwhen arrangingtea/

dessert saucers or in a lower position to load bowls and food

containers.

*Only available in selected models with different numbers and

positions.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack

may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE

RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

IftherackisequippedwithaLift-Up device*

(see figure)

, lift

it up by holding its sides. To restore the lower position, press

the levers (A) at the sides of the rack and follow the rack down.

Unsuitable crockery

• Woodencrockeryandcutlery.

• Delicatedecoratedglasses,artistichandicraftandantique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copperandtincrockery.

• Crockerysoiledwithash,wax,lubricatinggreaseorink.

Thecoloursofglassdecorationsandaluminium/silverpiecescan

change and fade during the washing process. Some types of

glass(e.g.crystalobjects)canbecomeopaqueafteranumber

of wash cycles too.

Damage to glass and crockery

Caused by:

• Typeofglassandglassproductionprocess.

• Chemicalcompositionofdetergent.

• Watertemperatureofrinsecycle.

Tips:

• Only use glasses and porcelainguaranteed bythe

manufacturer as dishwasher safe.

• Useadelicatedetergentsuitableforcrockery.

• Collectglassesandcutleryfromthedishwasherassoonas

the wash cycle is over.

Theupperrackcanbeadjustedforheightbasedonrequirements:

high position to place bulky crockery in the lower rack and low

positiontomakethemostofthetip-upcompartments/sectors

by creating more space upwards.

Tip-up compartments with adjustable position

The side tip-up compartments can be positioned at three

differentheightstooptimizethearrangementofcrockeryinside

the rack.

Wineglassescanbeplacedsafelyinthetip-upcompartments

by inserting the stem of each glass into the corresponding slots.

Cutlery tray*

Some dishwasher models are fitted with a sliding tray which

can be used to hold serving utensils or small cups. For optimum

washing performance avoid positioning bulky crockery directly

below the tray. The cutlery tray can be removed

(see Figure).

Before loading the tray, make sure the supports are properly

coupled to the upper rack

(see Figure).

* Only available in selected models.

Start-up and use

* Only available in selected models.

Measuring out the detergent

A good wash result also depends on the correct

amount of detergent being used. Exceeding the stated

amount does not result in a more effective wash and

increases environmental pollution.

Based on how soiled the items are, the amount can be

adjusted to individual cases using powder or liquid

detergent.

In the case of normally soiled items, use approximately

either 35 gr (powder detergent) or 35 ml (liquid detergent).

If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce

the amount of detergent used accordingly.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers'

Advice Offices.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly

inside the tub.

WhenmeasuringoutthedetergentrefertotheTableofwash

cyclestoaddtheproperquantity.CompartmentB comprises

a level showing the maximumquantity of liquidor powder

detergent that can be added to each cycle.

Removedetergentresiduesfromtheedgesofthedispenser

and close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS

option, because it adjusts the cycle so that the best washing

and drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing-up liquid.

Using excessive detergent may result in foam residue

remaining in the machine after the cycle has ended.

The use of tablets is only recommended for models which

offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and drying

cycle, powder detergent, liquid rinse aid and salt should

be used.

Starting the dishwasher

1.Turnthewatertapon.

2. Open the door and press ON-OFF button: the ON/OFF

indicator lights, options and the display come on.

3. Measure out the detergent.

(see adjacent information).

4. Load the racks

(see Loading the racks)

5. Select the wash cycle in accordance with the type of crockery

and its soil level

(see table of wash cycles)

by pressing the P

button.

6. Select the wash options

(see Special wash cycles and

options)

7. Start the wash cycle by shutting the door.

8. The end of the wash cycle is indicated by beeps and by the

flashing of the wash cycle number on the display. Open the door,

switchofftheappliancebypressingtheON/OFFbutton,shut

off the water tap and unplug the appliance from the electricity

socket.

9.Waitforafewminutesbeforeremovingthecrockery,inorder

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

certain extended periods of inactivity, in order to

minimise electricity consumption.

AUTO WASH CYCLES*:some models of dishwashers are

equippedwithaspecialsensorwhichcanbeusedtoassess

the level of soiling and automatically setting the most efficient

and economic wash cycle accordingly.

The duration of the Auto wash cycles may vary due to the

operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process,

it is possible to change the cycle, provided that it has only just

begun: open the door taking care to avoid the escaping steam,

bypressingandholdingtheON/OFFbutton,themachinewill

switchoff.SwitchthemachinebackonusingtheON/OFFbutton

and select the new wash cycle and any options desired; start

the cycle by closing the door.

Adding extra crockery

Withoutswitchingoffthemachine,openthedoor,takingcare

to avoid the escaping steam, and place the crockery inside the

dishwasher. Shut the door and the cycle will begin from the point

at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it

was interrupted once the door has been shut or the electricity

supply is restored.

Wash cycles

Wash cycle

which

include

drying

Options

Approximate

duration of wash

cycles

Water

consumption

(l/cycle)

Energy

consumption

(KWh/cycle)

1. Eco Yes

Delayed start – Tabs –

Extra Dry

03:10’ 9,0 0,93

2. Auto Intensive Yes

Delayed start – Tabs –

Extra Dry – Zone wash –

Short Time

02:00’ - 03:10’ 14,0 - 15,5 1,40 - 1,70

3. Auto Normal Yes

Delayed start – Tabs –

Extra Dry – Zone wash –

Short Time

01:30’ - 02:30’ 14,5 – 16,0 1,15 - 1,30

4. Auto Fast No

Delayed start – Tabs

00:40’ - 01:20’ 13,0 - 14,5 1,15- 1,25

5. Duo Wash Yes

Delayed start – Tabs –

Extra Dry – Short Time

02:00’ 18,0 1,25

6. Delicate Yes

Delayed start – Tabs –

Extra Dry

01:40’ 11,0 1,05

7. Express 30’ No

Delayed start – Tabs

00:30’ 9,0 0,50

8. Goodnight Yes

Delayed start – Tabs –

Extra Dry

03:30’ 15,0 1,15

9. Soak No

Delayed start

00:12’ 4,5 0,01

10. Sanitazing Yes

Delayed start

01:20’ 10,0 1,15

11. Self Clean No

Delayed start

00:50’ 8,0 0,80

Wash-cycledataismeasuredunderlaboratoryconditionsaccordingtoEuropeanStandardEN50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Instructions on wash-cycle selection and detergent dosage

1.TheECOwashcycleisthestandardcycletowhichtheenergylabeldatarefers.Itcanbeusedtowashcrockerywithanormal

soillevelandisthemostefficientcycleintermsofenergyandwaterconsumptionforthistypeofcrockery.29gr/ml+6gr/ml**–1

Tab (**Quantity of pre-washing detergent)

Heavilysoileddishesandpans(nottobeusedfordelicateitems).35gr/ml–1Tab

3.Normallysoiledpansanddishes.29gr/ml+6gr/ml**–1Tab

4.Limitedquantityofdailysoiling(idealfor4placesettings)25gr/ml–1Tab

5.Washspreadoverthetworacks:delicateonupperrackandheavy-dutyforpansonlowerrack.35gr/ml–1Tab

6.Cyclefordelicateitems,whicharemoresensitivetohightemperatures35gr/ml–1Tab

7.Fastcycletobeusedforslightlydirtydishes(idealfor2placesettings)25gr/ml–1Tab

8.Optimumperformanceensured.Idealfornight-timeoperation.35gr/ml–1Tab

9.Pre-washwhileawaitingcompletionoftheloadwiththedishesfromthenextmeal.Nodetergent.

10.High-temperaturedisinfectingcycle.Idealtocleancrockeryandfeedingbottles.30gr/ml–1Tab

11.DishwashercleaningcycletobeusedwhenthedishwasherisEMPTYwithspecialdetergents.

Standbyconsumption:Left-onmodeconsumption:5W-Offmodeconsumption:0.5W.

Extra drying

To improve the dryness level of the crockery, press

theEXTRADRYINGbuttonandtheindicatorlight/symbolwill

light up. If it is pressed again, the option will be deselected.

A higher temperature during the final rinsing and a longer

drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of

the wash cycle.

Multi-functional tablets (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, pressthe MULTI-

FUNCTIONALTABLETSbutton;thecorrespondingindicator

light/symbolwilllightup.Ifthebuttonispressedagain,the

option will be deselected.

The “Multi-functional tablets” option results in a

longer wash cycle.

The use of tablets is only recommended for models

having this option and it is not recommended with wash

cycles which do not specify the use of multi-functional

tablets.

Special wash cycles and Options

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and

thenpresstheZONEWASHbutton:theselectedracklights

up and the wash cycle starts in the selected rack only. Press

the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVEZONEwashing.Thiswashcycleisideal

for very soiled mixed loads, e.g. pans and saucepans,

dishes with heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery). The spraying pressure is

stronger and the washing temperature higher, thus ensuring

optimum handling of stubborn stains.

Select the option and the Normal

cycletostarttheSAVING

ZONEwashing.Thisfunctionmakesitpossibletoreduce

energy consumption. Cycle duration might change.

Remember to load the crockery in the selected rack only

Notes:

Optimumperformancelevelswhenusingthe“Fast"and"Express

30’”cyclescanbeachievedbyrespectingthespecifiednumber

of place settings.

To reduce consumption, only run the dishwasher when it is full.

Note for Test Laboratories:

forinformationoncomparativeEN

testing conditions, please send an email to the following address:

[email protected]

Wash options

If an option is not compatible with the selected wash cycle

(see table of wash cycles), the corresponding LED flashes

rapidly 3 times and beeps will sound.

Delayed start

The start of the wash cycle may be delayed for a

period of time between 1 and 12 hours.

1. Press theDELAYED START button:the corresponding

symbol appears on the display; each time you press the

button,thetime(1h,2h,etc.uptomax.12h)fromthestart

of the selected wash cycle will be increased.

2.Selectthecycleandclosethedoor:thetimerwillbegin

counting down;

3. Once this time has elapsed, the indicator light switches

off and the wash cycle begins.

To adjust the delay time and select a smaller period of time,

presstheDELAYEDSTARTbutton.Tocancelit,pressthe

button repeatedly until the selected delayed start indicator

light switches off. The wash cycle will start automatically as

soon as the door is shut.

Short Time

This option can be used to reduce the duration of

the main wash cycles while, maintaining the same washing

and drying performance levels. After selecting the wash

cycle,presstheSHORTTIMEbutton;theilluminationofthe

corresponding indicator light indicates its selection. Press

it again to deselect it.

Rinse aid and refined salt

Only use products which have been specifically designed

for dishwashers.

Do not use table/industrial salt or washing-up liquid.

Follow the instructions given on the packaging.

If using a multi-functional product it is not necessary to add

any rinse aid. However, we recommend that you add salt,

especially if you live in an area where the water is hard or

very hard.

(Follow the instructions given on the packaging).

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID indicator lights will stay lit.

Measuring out the rinse aid

Rinseaidmakesiteasierforthecrockerytodry,aswaterrunsoff

the surfaces more readily and therefore does not leave streaks

or marks. The rinse aid dispenser should be filled:

• WhentheLOWRINSEAIDindicatorlight* on the control panel

is illuminated, a reserve supply of rinse aid is still available

for1-2cycles;

1.Openthedispenser“D” by pressing and pulling up the tab

on the lid;

2. Carefully introduce the rinseaid asfar asthe maximum

reference notch of the filling space - avoid spilling it. If this

happens, clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

mayadjustthequantityofrinseaidused.Switchonandoffthe

dishwasherusingtheON/OFFbutton.PresstheP button three

times.PresstheON/OFFbutton,thesetlevelappearsonthe

display

(set to factory level).

Adjust the rinse aid supply level with the P button.

Press the ON/OFF button to save the adjustment setting.

TherinseaidlevelcanbesettoZERO,insuchacasetherinse

aid will not be supplied and the low rinse aid indicator light in

case of running out.

A maximum of 4 levels can be set according to the dishwasher

model.

•Iftherearestreaksonthecrockery,settoalownumber(1-2).

•Incase of dropsofwaterorlimescalemarks, set toahigh

number number (3-4).

Setting the water hardness

Everydishwasherisequippedwithawatersoftenerwhich,by

using refined salt designed especially for this type of appliance,

supplies water without limescale which is then used to wash

the crockery.

This dishwasher offers a setting which helps to reduce pollution

and optimises washing performance in accordance with the

water hardness level in your area. This information can be

obtained from your local water supplier.

SwitchonandoffthedishwasherusingtheON/OFFbutton.Press

and hold the P button for a few seconds until you hear a beep.

SwitchonthedishwasherwiththeON/OFFbutton,thesetlevel

appears on the display

(water softener set to medium level).

Adjust the water hardness level with the P button,

(1-2-3-4-5*

see water hardness table)

up to a max. of 5 levels.

Press the ON/OFF button to save the adjustment setting.

Evenifusingmulti-functionaltablets,thesaltdispensershould

still be filled.

(°dH=hardnessmeasuredinGermandegrees-°f=hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)

Measuring out the refined salt

In order to obtain the best possible results from a wash cycle,

make sure that the salt dispenser is never empty.

Refinedsaltremoveslimescalefromthewater,thusavoiding

the formation of deposits on crockery.

The salt dispenser is located in the lower part of the dishwasher

(see Description)

and should be filled:

• Whenthegreenfloat* cannot be seen by simply looking at

the cap of the salt dispenser;

• WhentheLOWRINSEAIDindicatorlightonthecontrolpanel

is illuminated *;

1.Removethelowerrackandunscrewthecap(anticlockwise).

2.Thefirsttimeyoudothis:fillthewater

tank right up to its edge.

3. Position the funnel

(see figure)

and

fill the salt dispenser up to the edge

(approximately 1 kg). It is normal for a

little water to leak out.

4.Removethefunnel*andwipeanysalt

residues away from the opening; rinse the cap under running

water and then screw it on, the head facing downwards so as to

let the water flow out of the four slots (star-shaped arrangement)

in the lower part of the cap (cap with green float

*).

It is advisable to perform this procedure every time you add

salt to the dispenser.

Make sure the cap is screwed on tightly so that no detergent can

get into the container during the wash cycle (this could damage

the water softener beyond repair).

Whennecessary,measureoutthesaltbeforeawashcycle

so that any saline solution which has leaked out of the salt

dispenser is removed.

* Only available in selected models.

Water Hardness Table

Average salt dispenser

capacity duration

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1,1 - 2 5 months

3 12 - 17 21 - 30 2,1 - 3 3 months

4 17 - 34 31 - 60 3,1 - 6 2 months

34 - 50 61 - 90 6,1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use of salt.

* a setting of 5 may increase cycle duration.

** 1 wash cycle per day.

Care and maintenance

Shutting off the water and electricity

supplies

• Turn



off



the



water



tap



after



every



wash



cycle



avoid



leaks.

• Always

unplug



the



appliance



when

 cleaning



and



when



performing maintenance work.

Cleaning the dishwasher

• The



external

surfaces

of

the



machine



and



the



control

panel

can be cleaned using a non-abrasive cloth which has been

dampened with water. Do not use solvents or abrasive

products.

• Any



marks



the

insideof

the



appliance



may



removed



using a cloth dampened with water and a little vinegar.

Preventing unpleasant odours

• Always

keep



the



door



the

appliance



ajar



order

to

avoid



moisture from forming and being trapped inside the machine.

• Clean



the



seals



around



the

door

and



detergent



dispensers



regularly using a damp sponge. This will avoid food becoming

trapped in the seals, which is the main cause behind the

formation of unpleasant odours.

Cleaning the sprayer arms

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and

clean them with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer arm,

turn the plastic locking ring in an

anti-clockwise direction. The upper

sprayer arm should be replaced

so that the side with the greater

number of holes is facing upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free

of impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked

and damage the dishwasher.

Clean the water inlet filter at the tap outlet regularly.

- Turn off the water tap.

- Unscrew the end of the water inlet hose, remove the filter and

clean it carefully under running water.



Re-place



the



filter



and



screw



the



water



hose



back



into

position.

Cleaning the filters

The filter assembly consists of three filters which remove food

residues from the washing water and then recirculate the water.

They should be cleaned if you wish to achieve the best results

in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters or if the

filter is loose.

•Afterseveralwashes,checkthefilterassemblyandifnecessary

clean it thoroughly under running water, using a non-metallic

brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and

pull it out

(fig.1).

2.RemovethecupfilterB by exerting a slight pressure on the

side flaps

(fig.2);

3. Slide out the stainless-steel plate filter A.

(fig. 3).

4. Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection

(black detail) (fig.4).

After cleaning the filters, re-place the filter assembly and fix it in

position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

Leaving the machine unused for extended

periods

• Disconnecttheappliancefromtheelectricitysupplyandshut

off the water tap.

• Leavethedooroftheapplianceajar.

• Whenyoureturn,runawashcyclewhenthedishwasheris

empty.

* Only available in selected models.

Troubleshooting

Whenevertheappliancefailstowork,checkforasolutionfromthefollowinglistbeforecallingforAssistance.

* Only available in selected models.

Problem: Possible causes / Solutions:

The dishwasher does not start or

cannot be controlled.

• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately

one minute and reset the program.

• The appliance has not been plugged in properly.

• The dishwasher door has not been shut properly.

The door won’t close. • The lock was released. Strongly push the door until a “clacking” noise is heard.

No water drains out from the

dishwasher.

• The dishwasher cycle has not yet nished.

• The water inlet hose is bent (see Installation).

• The drain duct is blocked.

• The lter is clogged up with food residues.

The dishwasher makes excessive

noise.

• The dishes are rattling against each other or against the sprayer arms.

• Excessive foam presence: the detergent has not been measured out correctly or it is not

suitable for use in dishwashers. (see Start-up and use).

The dishes and glasses are covered

in a white lm or limescale deposits.

• The level of the rened salt is low or the dosage setting is not suited to the hardness of the

water (see Rinse aid and salt).

• The lid on the salt dispenser is not closed properly.

• The rinse aid has been used up or the dosage is too low.

The dishes and glasses are streaked

or have a bluish tinge.

• The rinse aid dosage is too high.

The crockery has not been dried

properly.

• A wash cycle without a drying programme has been selected.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and salt).

• The rinse aid dispenser setting is not high enough.

• The crockery is made from non-stick material or plastic.

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

• The crockery has not been arranged well.

• The sprayer arms cannot move freely.

• The wash cycle is too gentle (see Wash cycles).

• Excessive foam presence: the detergent has not been measured out correctly or it is not

suitable for use in dishwashers. (see Start-up and use).

• The lid on the rinse aid compartment has not been shut correctly.

• The lter is dirty or blocked (see Care and maintenance).

• The rened salt level is low (see Rinse aid and salt).

The dishwasher does not take any

water in - Tap shut-off alarm

(beeps are heard and H appears for

some minutes on the display)

(the ON/OFF indicator light ashes and

number 6 appears on the display).

• There is no water in the mains supply.

• The water inlet hose is bent (see Installation).

• Turn on the tap and the appliance will start after a few minutes.

• The appliance lock has been activated because no action was taken when the beeps sounded.

Switch off the machine using the ON/OFF button, turn on the tap and switch the machine back

on after a few seconds by pressing the same button. Re-program the appliance and restart the

wash cycle.

Руководство по

эксплуатации

Русский, 16

ПОСУДОМОЕЧНАЯ МАШИНА

LTF 11M121

Содержание

Предосторожности и рекомендации, 17

Общие требования к безопасности

Утилизация

Энергосбережение и охрана окружающей среды

Установка, 18-19-20

Расположение и нивелировка

Водопроводное и электрическое подсоединения

Предупреждения по первому использованию машины

Первое включение

Технические данные

Описание изделия, 21

Общий вид

Панель управления

Загрузка корзин, 22-23

Нижняя корзина

Корзинка для столовых приборов

Верхняя корзина

Регуляция высоты верхней корзины

Включение и эксплуатация, 24

Запуск посудомоечной машины

Загрузка моющего средства

Программы, 25

Таблица программ

Специальные программы и

Допольнительные функции, 26

Ополаскиватель и регенерирующая

соль, 27

Заливка ополаскивателя

Загрузка регенерирующей соли

Техническое обслуживание и уход, 28

Отключение воды и электрического тока

Чистка посудомоечной машины

Средства против неприятных запахов

Чистка оросителей

Чистка фильтра подачи воды

Чистка фильтров

Длительный простой машины

Неисправности и методы их

устранения, 29

Сервисное обслуживание, 30

* Имеется только в некоторых моделях

Предосторожности и

рекомендации

Изделие спроектировано и изготовлено в

соответствии с международными нормативами по

безопасности. Настоящие инструкции составлены

в целях вашей безопасности и должны быть

внимательно прочитаны.

Важно сохранить данное руководство для его

последующих консультации. В случае продажи,

передачи или переезда проверьте, чтобы данное

техническое руководство сопровождало изделие.

Необходимо внимательно прочитать настоящие

инструкции: в них содержатся важные сведения об

установке изделия, его эксплуатации и безопасности.

Данное изделие предназначено для бытового или

другого аналогичного использования, например:

- в помещениях, предназначенных для приготовления

пищи для персонала магазинов, офисов и прочих

учреждений;

- в агротуристических усадьбах;

- для использования проживающими в гостинице,

мотеле и в других временных местах проживания;

- в гостиницах типа «номер с завтраком».

Общие требования к безопасности

• Данный электроприбор не может быть использован

лицами (включая детей) с ограниченными

физическими, сенсорными или умственными

способностями, неопытными или незнакомыми

с инструкциями обращения с электроприбором,

в отсутствие контроля лиц, ответственных за их

безопасность.

• Взрослые должны следить, чтобы дети не играли

с электроприбором.

• Данное изделие предназначается для

непрофессионального использования в домашних

условиях.

• Изделие предназначено для мытья посуды в

домашних условиях, может быть использовано

только взрослыми людьми в соответствии

с инструкциями, приведенными в данном

техническом руководстве.

• Запрещается устанавливать изделие на улице,

даже под навесом, так как воздействие на него

дождя и грозы является чрезвычайно опасным.

• Не прикасайтесь к посудомоечной машине с

босыми ногами.

• Не тяните за сетевой кабель для отсоединения

вилки изделия из сетевой розетки, возьмитесь за

штепсельную вилку рукой.

• Необходимо перекрыть водопроводный кран

и вынуть штепсельную вилку из сетевой

розетки перед началом чистки и технического

обслуживания машины.

• В случае неисправности категорически

запрещается открывать внутренние механизмы

изделия с целью их самостоятельного ремонта.

• Не опирайтесь и не садитель на открытую дверцу

машины: машина может опрокинуться.

• Не держите дверцу открытой, так как об нее

можно случайно споткнуться.

• Храните моющие средства и ополаскиватель

вдали от детей.

• Не разрешайте детям играть с упаковочными

материалами.

Утилизация

• Утилизация упаковочных материалов: соблюдайте

местные нормативы по утилизации упаковочных

материалов.

• Согласно Европейской Директиве 2012/19/

EU касательно утилизации электронных и

электрических электроприборов (WEEE)

электроприборы не должны выбрасываться

вместе с обычным городским мусором.

Выведенные из строя приборы должны собираться

отдельно для оптимизации их утилизации и

рекуперации составляющих их материалов, а

также для безопасности окружающей среды

и здоровья. Символ зачеркнутая мусорная

корзинка, имеющийся на всех приборах, служит

напоминанием об их отдельной утилизации.

За более подробной информацией о правильной

утилизации бытовых электроприборов

пользователи могут обратиться в специальную

государственную организацию или в магазин.

Энергосбережение и охрана окружающей среды

Экономия воды и электроэнергии

• Используйте посудомоечную машину только с

полной загрузкой. В ожидание полного заполнения

машины во избежание образования неприятных

запахов включите цикл Ополаскивание

(см.

Программы)

• Выбирайте программу мойки, подходящую для

данного типа посуды и степени загрязнения в

соответствии с Таблицей программ:

- для нормально грязной посуды используйте

программу Есо, обеспечивающую низкий расход

электроэнергии и воды.

- если машина загружена не полностью, включите

дополнительную функцию Половина загрузки *

(см. Запуск и эксплуатация).

• Если ваш контракт с поставщиком электроэнергии

предусматривает разные часовые тарифы для

экономии электроэнергии, пользуйтесь машиной

во время с льготным тарифом. Дополнительная

функция Запуск с задержкой*

(см. Запуск и

эксплуатация)

может помочь спланировать мойку

с энергосбережением.

Моющие средства, не содержащие фосфатов, хлора

и содержащие ферменты

• Настоятельно рекомендуем использовать

моющие средства, не содержащие фосфатов

и хлора, что помогает сохранить окружающую

среду.

• Ферменты оказывают особо эффективное

воздействие при температуре около 50°C,

поэтому при использовании моющих веществ

с ферментами можно выбрать программы

мойки с низкими температурами, получая те же

результаты, что и при мойке при 65°C.

• Аккуратно дозируйте моющее средство в

соответствии с указаниями производителя,

с степенью жесткости воды, со степенью

загрязнения и с количеством посуды во избежание

нерационального расхода. Хотя моющие средства

и являются биоразлагаемыми, они содержат

вещества, отрицательно влияющие на природу.

В случае переезда перевозите машину в вертикальном

положении. В случае крайней необходимости машина может

быть положена задней стороной вниз.

Расположение и нивелировка

1. Снимите упаковку с изделия и проверьте, чтобы на нем

не было повреждений, нанесенных при транспортировке.

При обнаружении повреждений не подсоединяйте машину,

а обратиться к продавцу.

2. Установите посудомоечную машину в нишу кухонного

гарнитура, так чтобы сбоков или сзади она прилегала к

стене или к кухонным элементам. Изделие также может быть

встроено под сплошной столешницей кухонного гарнитура*

(см. схему Монтажа)

3. Установите посудомоечную машину на ровный и твердый

пол. Выровняйте машину, отвинчивая или завинчивай

передние опорные ножки до идеально горизонтального

положения машины. Точная нивелировка гарантирует

стабильность и помогает избежать вибраций, шумов и

смещений машины.

*. Отрегулируйте высоту задней опоры, повернув

шестигранную красную втулку, расположенную спереди,

в центральной нижней части посудомоечной машины,

шестигранным разводным ключом с раскрытием 8 мм по

часовой стрелке для увеличения высоты и против часовой

стрелки для ее уменьшения.

(смотрите инструкции по

встроенному монтажу, прилагающиеся к документации)

Водопроводное и электрическое

подсоединения

Электрическое и водопроводное подсоединения машины

должны выполняться только квалифицированным техником.

Посудомоечная машина не должна давить на трубы или

на провод электропитания.

Изделие должно быть подсоединено к водопроводу при

помощи новых труб. Не используйте б/у трубы.

Трубы подачи воды и слива и провод электропитания могут

быть направлены вправо или влево для оптимальной

установки машины.

Подсоединение шланга подачи воды

• К крану холодной воды: прочно привинтите трубу подачи

воды к крану с резьбовым отверстием 3/4 газ. Перед

закруткой дайте стечь воде до тех пор, пока она не

станет прозрачной во избежание засорения машины

нечистотами.

• К крану горячей воды: если в вашем доме централизованная

система отопления, посудомоечная машина может быть

запитана горячей водой из водопровода, если температура

воды не превышает 60°C.

Привинтите трубу к крану, как описано выше для

подсоединения холодной воды.

Если длина водопроводного шланга будет недостаточной,

следует обратиться в специализированный магазин или к

уполномоченному сантехнику

(см. Техническое

обслуживание)

Давление воды должно быть в пределах значений,

указанных в таблице Технические данные

(см. сбоку)

Проверьте, чтобы водопроводный шланг не был заломлен

или сжат.

Подсоединение сливного шланга

Подсоедините сливной шланг, не сгибая его, к сливному

трубопроводу с минимальным диаметром 4 см.

Сливной шланг должен быть расположен на высоте от 40 до

80 см от пола или от платформы посудомоечной машины (А).

Перед подсоединением сливного шланга к сифону мойки

снимите пластиковую пробку (В).

Защита против затопления

Во избежание затопления посудомоечная машина:

- оснащена системой, перекрывающей подачу воды в случае

аномалии или внутренних утечек.

Некоторые модели оснащены дополнительным защитным

устройством New Acqua Stop*, предохраняющим от

затопления даже в случае разрыва водопроводного шланга.

ВНИМАНИЕ: ОПАСНОЕ НАПРЯЖЕНИЕ!

Категорически запрещается обрезать шланг подачи

воды, так как вдоль него проходят элементы под напряжением.

Электрическое подсоединение

Перед подсоединением вилки машины к электрической

розетке необходимо проверить следующее:

• сетевая розетка должна быть соединена с заземлением

и соответствовать нормативам;

• электрическая розетка должна быть рассчитана на

максимальную потребляемую мощность изделия,

указанную на заводской табличке, расположенной с

внутренней стороны дверцы.

(см. Описание посудомоечной машины);

• напряжение сети электропитания должно соответствовать

данным на паспортной табличке, расположенной с

внутренней стороны дверцы машины;

• сетевая розетка должна быть совместима со штепсельной

вилкой изделия. В противном случае поручите замену

вилки уполномоченному технику

(см. Техническое

обслуживание)

; не используйте удлинители и тройники.

Изделие должно быть установлено таким образом, чтобы

провод электропитания и электророзетка были легко

доступны.

Сетевой кабель изделия не должен быть согнут или сжат.

Если сетевой кабель поврежден, во избежание опасности

поручите его замену производителю изделия или

уполномоченному Центру технического обслуживания.

(См.

Техническое обслуживание)

Установка

Пленка защиты от конденсата*

После установки посудомоечной машины в нишу кухонного

элемента откройте ее дверцу и наклейте прозрачную

самоклеящуюся полоску снизу деревянной кухонной рабочей

поверхности для ее защиты от возможного конденсата.

Предупреждения по первому использованию

машины

После монтажа вынуть заглушки, установленные на

корзинах, и снять крепежные резинки с верхней корзины

(если имеются).

После установки машины, непосредственно перед первым

циклом мойки заполните бачок соли водой и засыпьте в

него примерно 1 кг соли (см. раздел Ополаскиватель и

регенерирующая соль): если вода будет вытекать из бачка,

это нормальное явление. Выберите степень жесткости воды

(см. раздел Ополаскиватель и регенерирующая соль).

- После загрузки соли индикатор ОТСУТСТВИЕ СОЛИ

гаснет.

Если бачок не будет заполнен солью, смягчитель воды и

нагревательный элемент могут повредиться.

Машина оснащена акустическими/звуковыми сигналами

(в зависимости от модели посудомоечной машины

которые предупреждают о выполнении команды:

включение, конец цикла и т.п.

Символ/индикаторы на консоли управления/дисплее

могут иметь разные цвета, мигать или гореть постоянно.

(в зависимости от модели посудомоечной машины

На дисплее показываются сведения о заданном цикле,

этапе мойки/сушки, остаточном времени, температуре

и т.п.

* Имеется только в некоторых моделях

Производитель:

Indesit Company S.p.A.

Виале А. Мерлони 47, 60044, Фабриано (АН), Италия

Импортер:

ООО “Индезит РУС”

С вопросами (в России) обращаться по адресу:

до 01.01.2011: Россия, 129223, Москва, Проспект

Мира, ВВЦ, пав. 46

с 01.01.2011: Россия, 127018, Москва, ул. Двинцев,

дом 12, корп. 1

Изделие:

Торговая марка:

Посудомоечная машина

Торговый знак изготовителя:

Модель: LTF 11M121

Изготовитель:

Indesit Company

Страна-изготовитель:

Загрузка

Сделано в Польше (POLAND)

14 столовых наборов

Размеры

ширина 59,5 см

высота 82см

глубина 57 см

Номинальное значение напряжения

электропитания или диапазон напряжения

220-240 V ~

Условное обозначение рода электрического тока или

номинальная частота переменного тока

50 Hz

Давление воды

0,05-1MPa (0,5-10 bar) 7,25-145 psi

Предохранитель

См. табличку технических данных на оборудовании

Класс мойки

Класс сушки

Класс энергопотребления

Потребление электроэнергии

0,93 кВт/час

Потребление воды за стандартный цикл мойки

9 л

Класс зашиты от поражения электрическим током

Класс защиты I

Оборудование соответствует следующим директивам

Европейского Экономического Сообщества:

-2006/95/EC («Низкое напряжение»)

- 2004/108/ЕС («Электромагнитная совмести-мость»)

- 2009/125/EC («Comm. Reg. 1016/2010») (Ecodesign)

- 2012/19/ЕU («Утилизация электрического и электронного)

- 97/17/EC (Этикетирование)

     

    

Дату производства данной техники можно получить из

серийного номера, расположенного под штрих-кодом (S/N

XXXXXXXXX * XXXXXXXXXXX), следующим образом:

- 1-ая цифра в S/N соответствует последней

цифре года,

- 2-ая и 3-я цифры в S/N - порядковому номеру

месяца года,

- 4-ая и 5-ая цифры в S/N - числу определенного

месяца и года.

В случае необходимости получения информации

по сертификатам соответствия или получения копий

сертификатов соответствия на данную технику, Вы

можете отправить запрос по электронному адресу

[email protected].



Страница загружается...

Hotpoint LTF 11M121 EU Руководство пользователя

Похожие модели бренда

Модели других брендов