Удлинитель на 4 порта USB 2.0 CAT 5 UCE3250 (до 50 м)
www.aten.com
A
Обзор оборудования
UCE3250L Вид спереди
1
Линк-порт
UCE3250R Вид спереди
1
Светодиодный индикатор
питания
2
Светодиодный индикатор
соединения
3
СД-индикатор активности
4
Порты USB (типа A)
B
Установка аппаратного обеспечения
1
С помощью кабеля USB Type-B-Type-A (из комплекта поставки)
подключите порт USB (типа B) локального повторителя к порту USB на
компьютере.
2
Подсоедините один конец кабеля Cat 5/5e/6 к порту соединения
локального повторителя.
3
Подсоедините другой конец кабеля Cat 5/5e/6 к удаленному порту
удлинителя.
4
Подсоедините адаптер питания (из комплекта поставки) к источнику
питания переменного тока . разъему DC-IN устройства, и подключите
выходной кабель адаптера к гнезду питания удаленного повторителя.
5
С помощью кабелей USB подключите до четырех периферийных
устройств USB 2.0 к портам USB (типа A) удаленного повторителя.
UCE3250L Вид сзади
1
Порт USB (типа B)
UCE3250R Вид сзади
1
Линк-порт
2
Разъем питания
UCE3250 4-port USB 2.0 CAT 5 Estensore (fi no a 50m)
www.aten.com
A
Recensione hardware
Vista anteriore UCE3250L
1
Porta di collegamento
Vista anteriore UCE3250R
1
LED accensione
2
Link LED
3
LED di attività
4
Porte USB Tipo-A
B
Installazione dell'hardware
1
Utilizzare un cavo USB da maschio tipo B a maschio di tipo A (incluso in
questo pacchetto) per collegare la porta USB di tipo B dell'estensore locale a
una porta USB del computer.
2
Collegare un'estremità di un cavo Cat 5/5e/6t alla porta Link dell'estensore
locale.
3
Collegare l'altra estremità del cavo Cat 5/5e/6 alla porta di collegamento
dell'estensore remoto.
4
Collegare l'adattatore di alimentazione (incluso nella confezione) a una
fonte di alimentazione CA e collegare l'altra estremità alla presa di corrente
dell'estensore remoto.
5
Utilizzare i cavi USB per collegare fi no a 4 periferiche USB 2.0 alle porte USB
Tipo-A dell'estensore remoto.
Vista posteriore UCE3250L
1
Porta USB Tipo-B
Vista posteriore UCE3250R
1
Porta di collegamento
2
Connettore d'alimentazione
Extensor UCE3250 de 4 puertos USB 2.0 CAT 5 (hasta 50m)
www.aten.com
A
Revisión del hardware
Vista frontal del UCE3250L
1
Puerto de conexión
Vista frontal del UCE3250R
1
LED de alimentación
2
LED de conexión
3
LED de actividad
4
Puertos USB tipo A
B
Instalación del hardware
1
Utilice un cable USB macho tipo B a tipo A (incluido en el paquete) para
conectar el puerto USB tipo B del extensor local al puerto USB del ordenador.
2
Conecte un extremo de un cable Cat 5/5e/6 al puerto de conexión del
extensor local.
3
Conecte el otro extremo del cable Cat 5/5e/6 al puerto de conexión del
extensor remoto.
4
Enchufe el adaptador de corriente (incluido en el paquete) a una fuente de
alimentación CA y enchufe el otro extremo a la clavija de alimentación del
extensor remoto.
5
Utilice cables USB para conectar hasta 4 dispositivos periféricos adicionales
USB 2.0 a los puertos USB tipo A del extensor remoto.
Vista posterior del UCE3250L
1
Puerto USB tipo B
Vista posterior del UCE3250R
1
Puerto de conexión
2
Conector de alimentación
UCE3250 4-Port USB 2.0 CAT 5 Extender (bis zu 50m)
www.aten.com
A
Hardware Übersicht
UCE3250L – Ansicht von vorne
1
Link Port
UCE3250R – Ansicht von vorne
1
Netz-LED
2
Link LED
3
Betriebs-LED
4
USB Typ-A Ports
B
Hardwareinstallation
1
Verwenden Sie ein USB Typ-B Stecker auf Typ-A Stecker Kabel (im
Lieferumfang enthalten), um den USB Typ-B Port des Local Extenders an einen
USB-Port des Computers anzuschließen.
2
Schließen Sie ein Ende eines Cat 5/5e/6 Kabels an den Link Port des Local
Extenders an.
3
Schließen Sie das andere Ende des Cat 5/5e/6 Kabels an den Link Port des
Remote Extenders an.
4
Schließen Sie das Netzteil (im Lieferumfang enthalten) an eine
Wechselstromquelle an und stecken Sie das andere Ende in die Netzbuchse
des Remote Extenders.
5
Verwenden Sie USB-Kabel, um bis zu 4 zusätzliche USB 2.0 Peripheriegeräte
an die USB Typ-A Ports des Remote Extenders anzuschließen.
UCE3250L – Ansicht von hinten
1
USB Typ-B Port
UCE3250R – Ansicht von hinten
1
Link Port
2
Netzbuchse
Extension UCE3250 4 ports USB 2.0 CAT 5 (jusqu'à 50m)
www.aten.com
A
Présentation du matériel
Vue de devant du UCE3250L
1
Port de liaison
Vue de devant du UCE3250R
1
LED d'alimentation
2
LED Link (Liaison)
3
LED d'activité
4
Ports USB Type A
B
Installation matérielle
1
Utilisez un câble USB de type B vers un câble mâle de type A (inclus dans ce
paquet) pour connecter le port USB Type-B du répéteur local à un port USB de
l'ordinateur.
2
Connectez une extrémité d'un câble de Cat 5/5e/6 au port de liaison du
répéteur local.
3
Connectez l'autre extrémité d'un câble de Cat 5/5e/6 au port de liaison du
répéteur distant.
4
Branchez l'adaptateur secteur (fourni avec ce paquet) à une source
d'alimentation secteur ; et branchez l'autre extrémité à la prise d'alimentation
du répéteur distant.
5
Utilisez des câbles USB pour connecter jusqu'à 4 périphériques USB 2.0 aux
ports USB Type A du répéteur distant.
Vue de derrière du UCE3250L
1
Port USB Type B
Vue de derrière du UCE3250R
1
Port de liaison
2
Prise d'alimentation
UCE3250 4-port USB 2.0 CAT 5 Extender (up to 50m)
www.aten.com
A
Hardware Review
UCE3250L Front View
1
Link Port
UCE3250R Front View
1
Power LED
2
Link LED
3
Activity LED
4
USB Type-A Ports
B
Hardware Installation
1
Use a USB Type-B Male to Type-A Male cable (included with this package) to
connect the Local Extender’s USB Type-B Port to a USB port on the computer.
2
Connect one end of a Cat 5/5e/6 cable to the Local Extender’s Link port.
3
Connect the other end of the Cat 5/5e/6 cable to the Remote Extender’s Link
port.
4
Plug the power adapter (included with this package) into an AC power source;
and plug the other end into the Remote Extender's Power Jack.
5
Use USB cables to connect up to 4 USB 2.0 additional peripheral devices to the
Remote Extender’s USB Type-A ports.
A
Hardware Review
B
Hardware Installation
© Copyright 2018 ATEN
®
International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
This product is RoHS compliant.
Printing Date: 04/2018
4-port USB 2.0 CAT 5 Extender (up to 50m)
Quick Start Guide
UCE3250
Package Contents
1 UCE3250L 4-port USB 2.0
CAT 5 Extender (Local unit)
1 UCE3250R 4-port USB 2.0
CAT 5 Extender (Remote unit)
1 USB Type-A Male to Type-B
Male Cable
1 Power Adapter
1 User lnstructions
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and
specifi cations contained in this package are subject to change without
prior notifi cation bythe manufacturer.
To reduce the environmental impact of our products, ATEN
documentation and software can be found online at
http://www.aten.com/download/
Technical Support
www.aten.com/support
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적
으로 하며, 모든 지역에서 사용할 수 있습니다.
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT:
This equipment has been tested and found to comply with
the limits for a Class B digital service, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. Any changes or modifi cations made to this
equipment may void the user s authority to operate this
equipment. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
- Consult the dealer/an experienced radio/television technician for help.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Scan for
more information
UCE3250L Rear View
1
USB Type-B Port
UCE3250R Rear View
1
Link Port
2
Power Jack
LI NK
US B 2.0 E xte nde r
LIN K
ACT IVITY
POW ER
5V 2.6 A
REMOTE UNIT
LI NK
US B 2.0 E xte nde r
LOCAL UNIT
UCE3250L Rear View UCE3250R Rear View
UCE3250L Front View UCE3250R Front View
4
1
1
1
1
2
2
3
1
2
3
4
5
Страница загружается...
/