Sony KDL-46X2000 Инструкция по применению

LCD Digital Colour TV

2-698-671-53(1)

GB

RU

PL

Operatin

g

Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Инструкция по эксплуатации

Перед включением телевизора прочтите раздел “Сведения

по безопасности” этого руководства.

Сохраняйте данное руководство для справок в будущем.

Instrukcja obsługi

Przed rozpoczęciem eksploatacji telewizora należy

zapoznać się z treścią rozdziału „Informacje dotyczące

bezpieczeństwa” niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

For useful information about Sony products

Для получения полезной информации о продукции Сони

Szczegółowe informacje o produktach Sony

KDL-52X2000

KDL-46X2000

KDL-40X2000

2

GB

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

• Any functions related to Digital TV (with logo) will

only work in countries or areas where DVB-T (MPEG2)

digital terrestrial signals are broadcasted. Please confirm

with your local dealer if you can receive a DVB-T signal

where you live.

• Although this TV set follows DVB-T specifications,

compatibility with future DVB-T digital terrestrial

broadcasts cannot be guaranteed.

• Some Digital TV functions may not be available in some

countries.

Trademark information

• is a registered trademark of the DVB Project

• Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897. BBE and BBE

symbol are registered trademarks of BBE Sound, Inc.

• “Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

• Manufactured under license from Dolby Laboratories.

• TruSurround technology is used as a virtualizer for Virtual

Dolby Surround.

• TruSurround, SRS and (

z) symbol are trademarks of SRS

Labs, Inc.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

• The illustrations used in this manual are of the KDL-

46X2000 unless otherwise stated.

Introduction

Notice for Digital TV function

3

GB

Table of Contents

Safety information .....................................................................................................................9

Precautions .............................................................................................................................12

Overview of the remote ........................................................................................................13

Overview of the TV buttons and indicators ........................................................................15

Watching TV............................................................................................................................16

Checking the Digital Electronic Programme Guide (EPG) .............................................19

Using the Digital Favourite list .......................................................................................21

Viewing pictures from connected equipment ..........................................................................22

Navigating through menus ......................................................................................................23

Picture menu ...........................................................................................................................24

Sound menu............................................................................................................................27

Screen menu...........................................................................................................................29

Set-up menu............................................................................................................................31

AV Set-up menu......................................................................................................................33

Analogue Set-up menu ...........................................................................................................35

Digital Set-up menu .......................................................................................................38

PC Settings menu ...................................................................................................................40

Connecting optional equipment...............................................................................................42

Programming the remote ........................................................................................................44

Specifications ..........................................................................................................................46

Troubleshooting ......................................................................................................................48

Index .......................................................................................................................................50

Start-up Guide 4

Watching TV

Using MENU Functions

Using Optional Equipment

Additional Information

GB

: for digital channels only

4

GB

Start-up Guide

1: Checking the

accessories

Remote RM-ED006 (1)

Size AA batteries (R6 type) (2)

Mains lead (Type C-6) (1)

• For models with ferrite cores, do not remove these cores.

Coaxial cable (1)

PC cable (1)

Cable holder (1)

Support belt (1) and screws (2)

Stand (1) and screws (4) (only for KDL-40X2000)

To insert batteries into the remote

Notes

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old

and new batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate disposal of the battery.

Please consult your local authority.

• Handle the remote control with care. Do not drop or step

on it, or spill liquid of any kind onto it.

• Do not place the remote control in a location near a heat

source, or in a place subject to direct sunlight, or in a damp

room.

To replace the bezel unit

The bezel unit can be replaced with others that are sold

separately. However, do not remove the unit except to

replace it. For details, see the instructions supplied

with bezel units.

Do not remove these ferrite cores.

Push and slide to open.

5

GB

Start-up Guide

2: Attaching the stand

(only for KDL-40X2000)

1 Place the TV onto the stand by aligning the

screw hole alignment lines over the stand

as shown.

2 Fix the TV to the stand using the supplied

screws.

Notes

• This TV is very heavy, so two or more people should place

the TV on the stand.

• If using an electric drill, set the tightening torque at

approximately 1.5 N·m (15 Kgf·cm).

3: Connecting an aerial/

VCR

1

2

Connecting an aerial only

Connecting an aerial and VCR

Coaxial cable

(supplied)

Mains lead (supplied)

Scart lead (not supplied)

VCR

Mains lead

(supplied)

Coaxial cable

(not supplied)

Coaxial cable

(supplied)

6

GB

4: Preventing the TV

from toppling over

5: Bundling the cables

6: Selecting the

language and country/

region

1 Connect the TV to your mains socket

(220-240 V AC, 50 Hz).

2 Press 1 on the TV (right side).

When you switch on the TV for the first time, the

Language menu appears on the screen.

2

3

1

2

3,4

2

7

GB

Start-up Guide

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press TV "/1

on the remote to switch on the TV.

3 Press F/f/G/g to select the language

displayed on the menu screens, then press

.

4 Press F/f to select the country/region in

which you will operate the TV, then press

.

If the country/region in which you want to use the

TV does not appear in the list, select “-” instead of

a country/region.

The message confirming the TV start auto-tuning

appears on the screen, then go to “7: Auto-tuning

the TV”.

7: Auto-tuning the TV

The TV will search for and store all available TV

channels.

1 Before you start auto-tuning the TV, insert

a pre-recorded tape into the VCR

connected to the TV (page 5) and start play

back.

The video channel will be located and stored on

the TV during auto-tuning.

If no VCR is connected to the TV, skip this step.

2 Press G/g to select “OK”, then press .

The TV starts searching for all available digital

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

If a message appears for you to confirm the aerial

connection

No digital or analogue channels were found.

Check the aerial connection and press G/g to

select “Yes”, then press to start auto-tuning

again.

4

2

Continued

8

GB

3 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” (page 35).

If you do not change the order in which the analogue

channels are stored on the TV, go to step 4.

4 Press MENU to exit.

The TV has now tuned in all the available channels.

Note

When a digital broadcast channel cannot be received, or

when selecting a region in which there are no digital

broadcasts in step 4 (page 7) under “6: Selecting the

language and country/region”, the time must be set after

performing step 3.

9

GB

Safety information

Mains lead

• Observe the followings to prevent the mains lead being

damaged. If the mains lead is damaged, it may result in a

fire or an electric shock.

– Unplug the mains

lead when moving

the TV set.

– When you

disconnect the

mains lead,

disconnect it from

the mains socket first.

– Be sure to grasp the plug when

disconnecting the mains lead. Do

not pull on the mains lead itself.

– Do not pinch, bend, or twist the

mains lead excessively. The core

conductors may be exposed or

broken.

– Do not modify the mains lead.

– Do not put anything heavy on the

mains lead.

– Keep the mains lead away from heat

sources.

• If you damage the mains lead, stop

using it and ask your dealer or Sony service centre to

exchange it.

• Do not use the supplied mains lead on any other

equipment.

• Use only an original Sony mains lead, not other brands.

Mains socket

• The TV set with a three-wire grounding

type mains plug must be connected to a

mains socket with a protective earthing

connection.

• Do not use a poor fitting mains socket.

Insert the plug fully into the mains socket.

A poor fit may cause arcing and result in a

fire. Contact your electrician to have the

mains socket changed.

Cleaning the mains plug

Unplug the mains plug and clean it

regularly. If the plug is covered with dust

and it picks up moisture, its insulation may

deteriorate and result in a fire.

Overloading

This TV set is designed to operate on

a 220–240 V AC supply only. Take

care not to connect too many

appliances to the same mains socket

as this could result in a fire or an electric shock.

When not in use

• If you will not be using the TV

set for several days, the TV set

should be disconnected from

the mains for environmental

and safety reasons.

• The TV set is not disconnected from the mains when the

TV set is switched off. To disconnect the TV set

completely, pull the plug from the mains. However, some

TV sets may have features which need the TV set to be left

in standby to work correctly.

Carrying

• Before carrying the TV set,

disconnect all the cables from the

TV set.

• Carrying the large size TV set

requires two or more people.

• When you carry the TV set by

hand, hold the TV set as

illustrated on the right. When

lifting the TV set or moving the

panel of the TV set, hold it firmly

from the bottom. If you do not do

so, the TV set may fall and be

damaged or cause serious injury.

• When transporting it, do not

subject the TV set to jolts or

excessive vibration. The TV set

may fall and be damaged or cause

serious injury.

• If the TV set has been dropped or

damaged, have it checked

immediately by qualified service

personnel.

• When you carry the TV set in for repair or when you move

it, pack it using the original carton and packing material.

Placement

• The TV set should be installed near an easily accessible

mains socket.

• Place the TV set on a stable, level surface.

Do not hang anything on the TV set. If

you do, the TV set may fall from the

stand, causing damage or serious injury.

• Do not install the TV set in places subject

to extreme temperature, for example in

direct sunlight, or near a radiator, or heating vent. If the

TV set is exposed to extreme temperature, the TV set may

overheat and cause deformation of the casing or cause the

TV set to malfunction.

• Do not install the TV set in a place exposed to direct air

conditioning. If the TV set is installed in such a location,

moisture may condense inside and may cause a

malfunction.

• Never place the TV set in hot, oily,

humid or excessively dusty places.

• Do not install the TV set where

insects may enter.

• Do not install the TV set where it

may be exposed to mechanical vibration.

• Do not install the TV set in a location where it may

protrude, such as on or behind a pillar, or where you might

bump your head on it. Otherwise, it may result in injury.

• Do not allow children to climb on the TV

set.

• If you use the TV set near the seashore,

salt may corrode metal parts of the TV set

and cause internal damage or fire.

KDL-46X2000/40X2000

KDL-52X2000

Continued

10

GB

Ventilation

• Never cover the ventilation

holes or insert anything in the

cabinet. It may cause

overheating and result in a fire.

• Unless proper ventilation is provided, the TV set may

gather dust and get dirty. For proper ventilation, observe

the following:

– Do not install the TV set turned backwards or sideways.

– Do not install the TV set turned over or upside down.

– Do not install the TV set on a shelf or in a closet.

– Do not place the TV set on a rug or bed.

– Do not cover the TV set with cloth, such as curtains, or

items such as newspapers, etc.

• Leave some space around the TV set as shown below.

Otherwise, air-circulation may be inadequate and cause

overheating, which may cause a fire or damage to the TV

set.

Installed on the wall

Installed with stand

• Never install the TV set as follows:

Optional accessories

Observe the following when installing the TV set using a

stand or wall-mount bracket. If you do not do so, the TV set

may fall and cause serious injury.

• It is strongly recommended that you use Sony accessories

for safety reasons:

– Wall-mount bracket SU-WL51

–TV stand SU-FL61

• It is strongly recommended that you use the official Sony

wall-mount bracket to allow adequate air circulation and

to avoid accumulated dust on the TV.

• If the TV set is to be installed on

a wall, have the installation

carried out by qualified service

personnel. Improper installation

may render the TV set unsafe.

• Secure the TV set properly,

following the instructions supplied with your stand when

installing the TV set.

• Be sure to attach the brackets supplied with your stand.

Wiring

• When wiring cables, be sure to unplug the mains lead for

your safety.

• Take care not to catch your feet on the cables. It may

damage the TV set.

Medical institutions

Do not place this TV set in a place

where medical equipment is in

use. It may cause a malfunction of

medical instruments.

Outdoor use

• Do not install this TV set

outdoors. If the TV set is

exposed to rain, it may result in a

fire or an electric shock.

• If this TV set is exposed to direct

sunlight, the TV set may heat up

and it may damage the TV set.

Vehicle, Ships and other

vessels

• Do not install this TV set in a

vehicle. The motion of the

vehicle may cause the TV set to

fall down and cause injury.

• Do not install this TV set on a

ship or other vessel. If the TV set

is exposed to seawater, it may

cause a fire or damage the TV

set.

30 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm

10 cm 6 cm

Leave at least this space around the set.

Air circulation

is blocked.

Air circulation

is blocked.

Wall Wall

11

GB

Water and moisture

• Do not use this TV set near water

– for example, near a bathtub or

shower room. Also do not expose

to rain, moisture or smoke. This

may result in a fire or an electric shock.

• Do not touch the mains lead and the TV

set with wet hands. Doing so may cause

an electric shock or damage to the TV

set.

Moisture and flammable objects

• Do not place any objects on the TV

set. The TV set shall not be exposed to

dripping or splashing and that no

objects filled with liquid, such as

vases, shall be placed on the TV set.

• To prevent fire, keep flammable

objects or naked lights (e.g. candles)

away from the TV set.

• If any liquid or solid object does fall through openings in

the cabinet, do not operate the TV set. It may result in an

electric shock or damage to the TV set. Have it checked

immediately by qualified service personnel.

Lightning storms

For your own safety, do not touch any

part of the TV set, mains lead, or

aerial lead during lightning storms.

Broken pieces

• Do not throw anything at the TV set.

The screen glass may break by the

impact and cause serious injury.

• If the surface of the TV set cracks, do

not touch it until you have unplugged the mains lead.

Otherwise electric shock may result.

Servicing

Dangerously high voltages are

present inside the TV set.

Do not open the cabinet. Entrust the

TV set to qualified service personnel

only.

Small accessories removal and fittable

Keep small accessories out of children’s reach.

12

GB

Precautions

Viewing the TV

• To view the TV comfortably, the recommended viewing

position is from four to seven times the screen’s vertical

length away from the TV set.

• To obtain a clear picture, do not expose the screen to direct

illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

• View the TV in moderate light, as viewing the TV in poor

light or during long period of time, strains your eyes.

Volume adjustment

• Adjust the volume so as not to trouble your neighbours.

Sound carries very easily at night time. Therefore, closing

the windows or using headphones is suggested.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD screen. This

is a structural property of the LCD screen and is not a

malfunction.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark. This does not

indicate a failure. These phenomena disappear as the

temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal

and mercury. The fluorescent tube used in this TV set also

contains mercury. Follow your local ordinances and

regulations for disposal.

Handling and cleaning the screen surface/cabinet of

the TV set

Be sure to unplug the mains lead connected to the TV set

from mains socket before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

• Do not push on the screen, scratch it with a hard object, or

throw anything at it. The screen may be damaged.

• Do not touch the display panel after operating the TV set

continuously for a long period as the display panel

becomes hot.

• We recommend that the screen surface be touched as little

as possible.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• The ventilation holes can accumulate dust over time. To

ensure proper ventilation, we recommend removing the

dust periodically (once a month) using a vacuum cleaner.

• If the angle of the TV set is to be adjusted, steady the base

of the stand with your hand to prevent the TV set from

becoming separated from the stand. Be careful not to get

your fingers caught between the TV set and the stand.

Optional Equipments

• Do not install optional components too close to the TV set.

Keep optional components at least 30 cm away from the

TV set. If a VCR is installed in front of the TV set or

beside the TV set, the picture may become distorted.

• Picture distortion and/or noisy sound may occur if the TV

set is positioned in close proximity to any equipment

emitting electromagnetic radiation.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Disposal of the TV set

13

GB

Overview of the remote

1 TV "/1 – TV standby

Switches the TV on and off from standby mode.

2 Number buttons

• In TV mode: Selects channels. For channel numbers 10 and above, enter

the second and third digit quickly.

• In Text mode: Enters the three digit page number to select the page.

3 – Previous channel

Returns to the previous channel watched (for more than five seconds).

4 – Screen mode (page 17)

5 – Picture freeze (page 17)

Freezes the TV picture.

6 / – Info / Text reveal

• In digital mode: Displays brief details of the programme currently being

watched.

• In analogue mode: Displays information such as current channel number

and screen format.

• In Text mode (page 17): Reveals hidden information (e.g. answers to a

quiz).

7 F/f/G/g/ (page 16, 23)

8 TOOLS (page 18, 22)

Enables you to access various viewing options and change/make adjustments

according to the source and screen format.

9 MENU (page 23)

0 PROG +/-/ / (page 16, 17)

• In TV mode: Selects the next (+) or previous (-) channel.

• In Text mode: Selects the next ( ) or previous ( ) page.

qa % – Mute (page 16)

qs 2 +/- – Volume

qd RETURN /

Returns to the previous screen of any displayed menu.

qf – EPG (Digital Electronic Programme Guide) (page 19)

qg Coloured buttons (page 17, 19, 21)

qh ANALOG – Analogue mode (page 16)

qj DIGITAL – Digital mode (page 16)

qk

/ – Text (page 17)

ql / – Input select / Text hold

• In TV mode (page 22): Selects the input source from equipment connected

to the TV sockets.

• In Text mode (page 17): Holds the current page.

w; A/B – Dual Sound (page 28)

Continued

14

GB

wa "/1

Switches on or off the optional equipment selected from the function buttons.

ws Function buttons

Enables you to operate the corresponding equipment. For details, see

“Programming the remote” on page 44.

wd DVD/VCR operating buttons

• . : Replays the current programme from the previous chapter mark (if

any).

• > : Advances forward to the next chapter mark (if any).

• : Replays the current programme for a set period of time.

• : Advances forward a set period of time.

• m : Plays a programme in fast reverse mode.

• M : Plays a programme in fast forward mode.

• H : Plays a programme at a normal speed.

• X : Pauses playback.

• x : Stops the playback.

• VISUAL SEARCH : Only for Sony DVD recorders with the visual search

function. For details, see the operating instructions supplied with the DVD

recorder.

wf DVD/VCR record buttons

• z REC: Starts recording.

• X REC PAUSE: Pauses the recording.

• x REC STOP: Stops the recording.

X REC PAUSE and x REC STOP are available only on DVD recorders.

wg F1/F2

• Selects a disc when using a DVD changer.

• Selects a function when using a combination unit (e.g. a DVD/VCR).

For details, see the operating instructions supplied with the DVD changer or

combination unit.

wh DVD MENU

Displays the DVD disc menu.

wj DVD TOP MENU

Displays the top menu of the DVD disc.

Tip

The number 5, H, PROG + and A/B buttons have tactile dots. Use the tactile dots as

references when operating the TV.

15

GB

Overview of the TV buttons and indicators

Note

Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is

turned on may cause the indicator to remain lit or may cause the TV to malfunction.

1 1 – Power

Switches the TV on or off.

2 PROG +/-/ /

• In TV mode: Selects the next (+) or previous

(-) channel.

• In TV menu: Moves through the options up

( ) or down ( ).

3 2 +/-/ /

• In TV mode: Increases (+) or decreases (-) the

volume.

• In TV menu: Moves through the options right

( ) or left ( ).

4 / – Input select/OK

• In TV mode (page 22): Selects the input

source from equipment connected to the TV

sockets.

• In TV menu: Selects the menu or option, and

confirms the setting.

5 (page 23)

6 – Timer REC programme/Picture Off/

Timer indicator

• Lights up in orange when the Timer recording

is set (page 19, 20). Lights up in red when the

recording starts.

• Lights up in green when the picture is

switched off (page 31).

• Lights up in orange when the timer is set

(page 31).

7 1 – Standby indicator

Lights up in red when the TV is in standby mode.

8 " – Power indicator

Lights up in green when the TV is switched on.

9 Remote control sensor/Light sensor

(page 32)

• Receives IR signals from the remote.

• Do not put anything over the sensor, as its

function may be affected.

PROG

MENU

16

GB

Watching TV

1 Press 1 on the TV (right side) to switch on

the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press TV "/1

on the remote to switch on the TV.

2 Press DIGITAL to switch to digital mode or

ANALOG to switch to analogue mode.

The channels available vary depending on the

mode.

3 Press the number buttons or PROG +/- to

select a TV channel.

To select channel numbers 10 and above using the

number buttons, enter the second and third digits

quickly.

To select a digital channel using the Digital

Electronic Programme Guide (EPG), see page 19.

In digital mode

An information banner appears briefly. The

following icons may be indicated on the banner.

Additional operations

Watching TV

3

1

2

3

: Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

: Current programme is being recorded

To Do this

Switch off the TV

temporarily

(standby mode)

Press TV "/1.

Switch off the TV Press 1 on the TV (right side).

Note

To disconnect the TV completely,

pull the plug from the mains.

Switch on the TV

without sound from

standby mode

Press %. Press 2 +/- to adjust

the volume.

Adjust the volume Press 2 + (increase)/

- (decrease).

Mute the sound Press %. Press again to restore.

Access the

Programme index

table (in analogue

mode only)

Press . To select an analogue

channel, press

F/f, then press

.

To access the Input signal index

table, see page 22.

17

GB

Watching TV

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text and TV picture t Text t No Text (exit the

Text service)

To select a page, press the number buttons or / .

To hold a page, press / .

To reveal hidden information, press / .

To jump a page, press and

F/f, then press (for

three digit pages).

Tips

• Ensure that the TV is receiving a good signal, or some text

errors may occur.

• Most TV channels broadcast a Text service. For

information on the use of the service, select the index

page.

• When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access

pages quickly and easily. Press the corresponding

coloured button to access the page.

To freeze the picture – Picture freeze

You can freeze the current picture to make a note of a

telephone number or recipe.

1 Press .

The frozen picture is displayed on the right of the

screen. You can watch a moving picture on the

left.

2 Press again to return to normal TV

mode.

To change the screen format manually to

suit the broadcast

Press repeatedly to select Smart, 4:3, Wide,

Zoom, or 14:9.

Displays conventional 4:3 broadcasts with an

imitation wide screen effect. The 4:3 picture is

stretched to fill the screen.

Displays conventional 4:3 broadcasts (e.g. non-wide

screen TV) in the correct proportions.

Displays wide screen (16:9) broadcasts in the correct

proportions.

Displays cinemascopic (letter box format) broadcasts

in the correct proportions.

Displays 14:9 broadcasts in the correct proportions.

As a result, black border areas are visible on the

screen.

* Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. The TV

will automatically select the best mode to suit the

broadcast (page 29).

• You can adjust the position of the picture when selecting

Smart, 14:9 or Zoom. Press

F/f to move up or down

(e.g. to read subtitles).

Smart*

4:3

Wide

Zoom*

14:9*

Continued

18

GB

To use the Tools menu

Press TOOLS to display the following options when

viewing a TV programme.

* This option appears only if “i Speaker Link” is set to

“Off” (page 32).

To view two pictures simultaneously – PAP

(Picture and Picture)

You can view two pictures (external input and TV

programme) on the screen simultaneously.

Connect the optional equipment (page 42), and make

sure that images from the equipment appear on the

screen (page 22).

Notes

• This function is not available for a PC input source.

• You cannot change the size of the pictures.

1 Press TOOLS to display the Tools menu.

2 Press F/f to select “PAP”, then press .

The picture from connected equipment is

displayed on the left and the TV programme is

displayed on the right.

3 Press number buttons or PROG +/- to

select the TV channel.

To return to normal TV mode

Press or RETURN.

Tips

• You can also return to normal TV mode by selecting

“Single Picture” from the Tools menu.

• The picture framed in green is audible. You can switch the

audible picture by pressing

G/g.

Options Description

Close Closes the Tools menu.

PAP (or Single Picture) See page 18.

Picture Mode See page 24.

Sound Mode See page 27.

Subtitle Setting (in

digital mode only)

See page 38.

Digital Favourites (in

digital mode only)

See page 21.

Power Saving See page 31.

Sleep Timer See page 31.

i Volume* See page 32.

Auto Clock Set (in

analogue mode only)

Allows you to switch to digital

mode and obtain the time.

19

GB

Watching TV

Checking the Digital Electronic Programme Guide

(EPG) *

1 In digital mode, press to display the

Digital Electronic Programme Guide

(EPG).

2 Perform the desired operation, as shown in

the following table.

Note

Programme information will only be displayed if the TV

station is transmitting it.

* This function may not be available in some countries.

Digital Electronic Programme Guide (EPG)

To Do this

Turn off the EPG Press .

Move through the EPG Press

F/f/G/g.

Watch a current programme Press while the current programme is selected.

Sort the programme information by

category – Category list

1 Press the blue button.

2 Press

F/f/G/g to select a category. The category name is

displayed on the side.

The categories available include:

“All Categories”: Contains all available channels.

Category name (e.g. “News”): Contains all channels corresponding to the

selected category.

3 Press .

The Digital Electronic Programme Guide (EPG) now only displays the

current programmes from the category selected.

Set a programme to be recorded – Timer

REC

1 Press F/f/G/g to select the future programme you want to

record.

2 Press .

3 Press

F/f to select “Timer REC”.

4 Press to set the TV and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up in orange.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for a

PIN code will appear on the screen. For more details refer to “Parental Lock”

on page 38.

Continued

20

GB

Tip

You can also display the Digital Electronic Programme Guide (EPG) by selecting “Digital EPG” in the “MENU” (page 23).

Set a programme to be displayed

automatically on the screen when it starts

– Reminder

1 Press F/f/G/g to select the future programme you want to

display.

2 Press .

3 Press

F/f to select “Reminder”.

4 Press to automatically display the selected programme

when the programme starts.

A c symbol appears by that programme’s information.

Note

If you switch the TV to standby mode, it will automatically turn itself on

when the programme is about to start.

Set the time and date of a programme you

want to record – Manual timer REC

1 Press .

2 Press

F/f to select “Manual timer REC”, then press .

3 Press F/f to select the date, then press g.

4 Set the start and stop time in the same way as in step 3.

5 Press

F/f to select the programme, then press .

6 Press to set the TV and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up in orange.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for a

PIN code will appear on the screen. For more details refer to “Parental Lock”

on page 38.

Cancel a recording/reminder – Timer list

1 Press .

2 Press

F/f to select “Timer list”.

3 Press F/f to select the programme you want to cancel, then

press .

4 Press

F/f to select “Cancel Timer”, then press .

A display appears to confirm that you want to cancel the programme.

5 Press G/g to select “Yes”, then press to confirm.

To Do this

Страница загружается ...

Sony KDL-46X2000 Инструкция по применению

Это руководство также подходит для

Sony KDL-46X2000 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов