Sony KDL-40X2000 Инструкция по применению

Категория
ЖК-телевизоры
Тип
Инструкция по применению

Это руководство также подходит для

© 2006 Sony Corporation
LCD Digital Colour TV
2-698-671-53(1)
GB
RU
PL
Operatin
g
Instructions
Before operating the TV, please read the “Safety
information” section of this manual.
Retain this manual for future reference.
Инструкция по эксплуатации
Перед включением телевизора прочтите раздел “Сведения
по безопасности” этого руководства.
Сохраняйте данное руководство для справок в будущем.
Instrukcja obsługi
Przed rozpoczęciem eksploatacji telewizora należy
zapoznać się z treścią rozdziału „Informacje dotyczące
bezpieczeństwa” niniejszej instrukcji.
Zachować instrukcję do wykorzystania w przyszłości.
For useful information about Sony products
Для получения полезной информации о продукции Сони
Szczegółowe informacje o produktach Sony
KDL-52X2000
KDL-46X2000
KDL-40X2000
2
GB
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
Any functions related to Digital TV (with logo) will
only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm
with your local dealer if you can receive a DVB-T signal
where you live.
Although this TV set follows DVB-T specifications,
compatibility with future DVB-T digital terrestrial
broadcasts cannot be guaranteed.
Some Digital TV functions may not be available in some
countries.
Trademark information
is a registered trademark of the DVB Project
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under one or more of the
following US patents: 5510752, 5736897. BBE and BBE
symbol are registered trademarks of BBE Sound, Inc.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.
TruSurround technology is used as a virtualizer for Virtual
Dolby Surround.
TruSurround, SRS and (
z) symbol are trademarks of SRS
Labs, Inc.
TruSurround technology is incorporated under license
from SRS Labs, Inc.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
The illustrations used in this manual are of the KDL-
46X2000 unless otherwise stated.
Introduction
Notice for Digital TV function
3
GB
Table of Contents
Safety information .....................................................................................................................9
Precautions .............................................................................................................................12
Overview of the remote ........................................................................................................13
Overview of the TV buttons and indicators ........................................................................15
Watching TV............................................................................................................................16
Checking the Digital Electronic Programme Guide (EPG) .............................................19
Using the Digital Favourite list .......................................................................................21
Viewing pictures from connected equipment ..........................................................................22
Navigating through menus ......................................................................................................23
Picture menu ...........................................................................................................................24
Sound menu............................................................................................................................27
Screen menu...........................................................................................................................29
Set-up menu............................................................................................................................31
AV Set-up menu......................................................................................................................33
Analogue Set-up menu ...........................................................................................................35
Digital Set-up menu .......................................................................................................38
PC Settings menu ...................................................................................................................40
Connecting optional equipment...............................................................................................42
Programming the remote ........................................................................................................44
Specifications ..........................................................................................................................46
Troubleshooting ......................................................................................................................48
Index .......................................................................................................................................50
Start-up Guide 4
Watching TV
Using MENU Functions
Using Optional Equipment
Additional Information
GB
: for digital channels only
4
GB
Start-up Guide
1: Checking the
accessories
Remote RM-ED006 (1)
Size AA batteries (R6 type) (2)
Mains lead (Type C-6) (1)
For models with ferrite cores, do not remove these cores.
Coaxial cable (1)
PC cable (1)
Cable holder (1)
Support belt (1) and screws (2)
Stand (1) and screws (4) (only for KDL-40X2000)
To insert batteries into the remote
Notes
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix old
and new batteries.
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of the battery.
Please consult your local authority.
Handle the remote control with care. Do not drop or step
on it, or spill liquid of any kind onto it.
Do not place the remote control in a location near a heat
source, or in a place subject to direct sunlight, or in a damp
room.
To replace the bezel unit
The bezel unit can be replaced with others that are sold
separately. However, do not remove the unit except to
replace it. For details, see the instructions supplied
with bezel units.
Do not remove these ferrite cores.
Do not remove these ferrite cores.
Push and slide to open.
5
GB
Start-up Guide
2: Attaching the stand
(only for KDL-40X2000)
1 Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2 Fix the TV to the stand using the supplied
screws.
Notes
This TV is very heavy, so two or more people should place
the TV on the stand.
If using an electric drill, set the tightening torque at
approximately 1.5 N·m (15 Kgf·cm).
3: Connecting an aerial/
VCR
1
2
2
Connecting an aerial only
Connecting an aerial and VCR
Coaxial cable
(supplied)
Mains lead (supplied)
Scart lead (not supplied)
VCR
Mains lead
(supplied)
Coaxial cable
(not supplied)
Coaxial cable
(supplied)
6
GB
4: Preventing the TV
from toppling over
5: Bundling the cables
6: Selecting the
language and country/
region
1 Connect the TV to your mains socket
(220-240 V AC, 50 Hz).
2 Press 1 on the TV (right side).
When you switch on the TV for the first time, the
Language menu appears on the screen.
2
3
1
1
2
3,4
3,4
2
7
GB
Start-up Guide
When the TV is in standby mode (the 1 (standby)
indicator on the TV (front) is red), press TV "/1
on the remote to switch on the TV.
3 Press F/f/G/g to select the language
displayed on the menu screens, then press
.
4 Press F/f to select the country/region in
which you will operate the TV, then press
.
If the country/region in which you want to use the
TV does not appear in the list, select “-” instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to “7: Auto-tuning
the TV”.
7: Auto-tuning the TV
The TV will search for and store all available TV
channels.
1 Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 5) and start play
back.
The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.
2 Press G/g to select “OK”, then press .
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connection
No digital or analogue channels were found.
Check the aerial connection and press G/g to
select “Yes”, then press to start auto-tuning
again.
4
2
2
Continued
8
GB
3 When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 35).
If you do not change the order in which the analogue
channels are stored on the TV, go to step 4.
4 Press MENU to exit.
The TV has now tuned in all the available channels.
Note
When a digital broadcast channel cannot be received, or
when selecting a region in which there are no digital
broadcasts in step 4 (page 7) under “6: Selecting the
language and country/region”, the time must be set after
performing step 3.
9
GB
Safety information
Mains lead
Observe the followings to prevent the mains lead being
damaged. If the mains lead is damaged, it may result in a
fire or an electric shock.
Unplug the mains
lead when moving
the TV set.
When you
disconnect the
mains lead,
disconnect it from
the mains socket first.
Be sure to grasp the plug when
disconnecting the mains lead. Do
not pull on the mains lead itself.
Do not pinch, bend, or twist the
mains lead excessively. The core
conductors may be exposed or
broken.
Do not modify the mains lead.
Do not put anything heavy on the
mains lead.
Keep the mains lead away from heat
sources.
If you damage the mains lead, stop
using it and ask your dealer or Sony service centre to
exchange it.
Do not use the supplied mains lead on any other
equipment.
Use only an original Sony mains lead, not other brands.
Mains socket
The TV set with a three-wire grounding
type mains plug must be connected to a
mains socket with a protective earthing
connection.
Do not use a poor fitting mains socket.
Insert the plug fully into the mains socket.
A poor fit may cause arcing and result in a
fire. Contact your electrician to have the
mains socket changed.
Cleaning the mains plug
Unplug the mains plug and clean it
regularly. If the plug is covered with dust
and it picks up moisture, its insulation may
deteriorate and result in a fire.
Overloading
This TV set is designed to operate on
a 220–240 V AC supply only. Take
care not to connect too many
appliances to the same mains socket
as this could result in a fire or an electric shock.
When not in use
If you will not be using the TV
set for several days, the TV set
should be disconnected from
the mains for environmental
and safety reasons.
The TV set is not disconnected from the mains when the
TV set is switched off. To disconnect the TV set
completely, pull the plug from the mains. However, some
TV sets may have features which need the TV set to be left
in standby to work correctly.
Carrying
Before carrying the TV set,
disconnect all the cables from the
TV set.
Carrying the large size TV set
requires two or more people.
When you carry the TV set by
hand, hold the TV set as
illustrated on the right. When
lifting the TV set or moving the
panel of the TV set, hold it firmly
from the bottom. If you do not do
so, the TV set may fall and be
damaged or cause serious injury.
When transporting it, do not
subject the TV set to jolts or
excessive vibration. The TV set
may fall and be damaged or cause
serious injury.
If the TV set has been dropped or
damaged, have it checked
immediately by qualified service
personnel.
When you carry the TV set in for repair or when you move
it, pack it using the original carton and packing material.
Placement
The TV set should be installed near an easily accessible
mains socket.
Place the TV set on a stable, level surface.
Do not hang anything on the TV set. If
you do, the TV set may fall from the
stand, causing damage or serious injury.
Do not install the TV set in places subject
to extreme temperature, for example in
direct sunlight, or near a radiator, or heating vent. If the
TV set is exposed to extreme temperature, the TV set may
overheat and cause deformation of the casing or cause the
TV set to malfunction.
Do not install the TV set in a place exposed to direct air
conditioning. If the TV set is installed in such a location,
moisture may condense inside and may cause a
malfunction.
Never place the TV set in hot, oily,
humid or excessively dusty places.
Do not install the TV set where
insects may enter.
Do not install the TV set where it
may be exposed to mechanical vibration.
Do not install the TV set in a location where it may
protrude, such as on or behind a pillar, or where you might
bump your head on it. Otherwise, it may result in injury.
Do not allow children to climb on the TV
set.
If you use the TV set near the seashore,
salt may corrode metal parts of the TV set
and cause internal damage or fire.
KDL-46X2000/40X2000
KDL-52X2000
Continued
10
GB
Ventilation
Never cover the ventilation
holes or insert anything in the
cabinet. It may cause
overheating and result in a fire.
Unless proper ventilation is provided, the TV set may
gather dust and get dirty. For proper ventilation, observe
the following:
Do not install the TV set turned backwards or sideways.
Do not install the TV set turned over or upside down.
Do not install the TV set on a shelf or in a closet.
Do not place the TV set on a rug or bed.
Do not cover the TV set with cloth, such as curtains, or
items such as newspapers, etc.
Leave some space around the TV set as shown below.
Otherwise, air-circulation may be inadequate and cause
overheating, which may cause a fire or damage to the TV
set.
Installed on the wall
Installed with stand
Never install the TV set as follows:
Optional accessories
Observe the following when installing the TV set using a
stand or wall-mount bracket. If you do not do so, the TV set
may fall and cause serious injury.
It is strongly recommended that you use Sony accessories
for safety reasons:
Wall-mount bracket SU-WL51
–TV stand SU-FL61
It is strongly recommended that you use the official Sony
wall-mount bracket to allow adequate air circulation and
to avoid accumulated dust on the TV.
If the TV set is to be installed on
a wall, have the installation
carried out by qualified service
personnel. Improper installation
may render the TV set unsafe.
Secure the TV set properly,
following the instructions supplied with your stand when
installing the TV set.
Be sure to attach the brackets supplied with your stand.
Wiring
When wiring cables, be sure to unplug the mains lead for
your safety.
Take care not to catch your feet on the cables. It may
damage the TV set.
Medical institutions
Do not place this TV set in a place
where medical equipment is in
use. It may cause a malfunction of
medical instruments.
Outdoor use
Do not install this TV set
outdoors. If the TV set is
exposed to rain, it may result in a
fire or an electric shock.
If this TV set is exposed to direct
sunlight, the TV set may heat up
and it may damage the TV set.
Vehicle, Ships and other
vessels
Do not install this TV set in a
vehicle. The motion of the
vehicle may cause the TV set to
fall down and cause injury.
Do not install this TV set on a
ship or other vessel. If the TV set
is exposed to seawater, it may
cause a fire or damage the TV
set.
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm
10 cm 6 cm
Leave at least this space around the set.
Air circulation
is blocked.
Air circulation
is blocked.
Wall Wall
11
GB
Water and moisture
Do not use this TV set near water
– for example, near a bathtub or
shower room. Also do not expose
to rain, moisture or smoke. This
may result in a fire or an electric shock.
Do not touch the mains lead and the TV
set with wet hands. Doing so may cause
an electric shock or damage to the TV
set.
Moisture and flammable objects
Do not place any objects on the TV
set. The TV set shall not be exposed to
dripping or splashing and that no
objects filled with liquid, such as
vases, shall be placed on the TV set.
To prevent fire, keep flammable
objects or naked lights (e.g. candles)
away from the TV set.
If any liquid or solid object does fall through openings in
the cabinet, do not operate the TV set. It may result in an
electric shock or damage to the TV set. Have it checked
immediately by qualified service personnel.
Lightning storms
For your own safety, do not touch any
part of the TV set, mains lead, or
aerial lead during lightning storms.
Broken pieces
Do not throw anything at the TV set.
The screen glass may break by the
impact and cause serious injury.
If the surface of the TV set cracks, do
not touch it until you have unplugged the mains lead.
Otherwise electric shock may result.
Servicing
Dangerously high voltages are
present inside the TV set.
Do not open the cabinet. Entrust the
TV set to qualified service personnel
only.
Small accessories removal and fittable
Keep small accessories out of children’s reach.
12
GB
Precautions
Viewing the TV
To view the TV comfortably, the recommended viewing
position is from four to seven times the screen’s vertical
length away from the TV set.
To obtain a clear picture, do not expose the screen to direct
illumination or direct sunlight. If possible, use spot
lighting directed down from the ceiling.
View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
Volume adjustment
Adjust the volume so as not to trouble your neighbours.
Sound carries very easily at night time. Therefore, closing
the windows or using headphones is suggested.
When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
The LCD screen contains a small amount of liquid crystal
and mercury. The fluorescent tube used in this TV set also
contains mercury. Follow your local ordinances and
regulations for disposal.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the mains lead connected to the TV set
from mains socket before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
Do not push on the screen, scratch it with a hard object, or
throw anything at it. The screen may be damaged.
Do not touch the display panel after operating the TV set
continuously for a long period as the display panel
becomes hot.
We recommend that the screen surface be touched as little
as possible.
To remove dust from the screen surface/cabinet, wipe
gently with a soft cloth. If dust is persistent, wipe with a
soft cloth slightly moistened with a diluted mild detergent
solution.
Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
The ventilation holes can accumulate dust over time. To
ensure proper ventilation, we recommend removing the
dust periodically (once a month) using a vacuum cleaner.
If the angle of the TV set is to be adjusted, steady the base
of the stand with your hand to prevent the TV set from
becoming separated from the stand. Be careful not to get
your fingers caught between the TV set and the stand.
Optional Equipments
Do not install optional components too close to the TV set.
Keep optional components at least 30 cm away from the
TV set. If a VCR is installed in front of the TV set or
beside the TV set, the picture may become distorted.
Picture distortion and/or noisy sound may occur if the TV
set is positioned in close proximity to any equipment
emitting electromagnetic radiation.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall
be handed over to the applicable
collection point for the recycling
of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more
detailed information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Disposal of the TV set
13
GB
Overview of the remote
1 TV "/1 – TV standby
Switches the TV on and off from standby mode.
2 Number buttons
In TV mode: Selects channels. For channel numbers 10 and above, enter
the second and third digit quickly.
In Text mode: Enters the three digit page number to select the page.
3 – Previous channel
Returns to the previous channel watched (for more than five seconds).
4 – Screen mode (page 17)
5 – Picture freeze (page 17)
Freezes the TV picture.
6 / – Info / Text reveal
In digital mode: Displays brief details of the programme currently being
watched.
In analogue mode: Displays information such as current channel number
and screen format.
In Text mode (page 17): Reveals hidden information (e.g. answers to a
quiz).
7 F/f/G/g/ (page 16, 23)
8 TOOLS (page 18, 22)
Enables you to access various viewing options and change/make adjustments
according to the source and screen format.
9 MENU (page 23)
0 PROG +/-/ / (page 16, 17)
In TV mode: Selects the next (+) or previous (-) channel.
In Text mode: Selects the next ( ) or previous ( ) page.
qa % – Mute (page 16)
qs 2 +/- – Volume
qd RETURN /
Returns to the previous screen of any displayed menu.
qf – EPG (Digital Electronic Programme Guide) (page 19)
qg Coloured buttons (page 17, 19, 21)
qh ANALOG – Analogue mode (page 16)
qj DIGITAL – Digital mode (page 16)
qk
/ – Text (page 17)
ql / – Input select / Text hold
In TV mode (page 22): Selects the input source from equipment connected
to the TV sockets.
In Text mode (page 17): Holds the current page.
w; A/B – Dual Sound (page 28)
Continued
14
GB
wa "/1
Switches on or off the optional equipment selected from the function buttons.
ws Function buttons
Enables you to operate the corresponding equipment. For details, see
“Programming the remote” on page 44.
wd DVD/VCR operating buttons
. : Replays the current programme from the previous chapter mark (if
any).
> : Advances forward to the next chapter mark (if any).
: Replays the current programme for a set period of time.
: Advances forward a set period of time.
m : Plays a programme in fast reverse mode.
M : Plays a programme in fast forward mode.
H : Plays a programme at a normal speed.
X : Pauses playback.
x : Stops the playback.
VISUAL SEARCH : Only for Sony DVD recorders with the visual search
function. For details, see the operating instructions supplied with the DVD
recorder.
wf DVD/VCR record buttons
z REC: Starts recording.
X REC PAUSE: Pauses the recording.
x REC STOP: Stops the recording.
X REC PAUSE and x REC STOP are available only on DVD recorders.
wg F1/F2
Selects a disc when using a DVD changer.
Selects a function when using a combination unit (e.g. a DVD/VCR).
For details, see the operating instructions supplied with the DVD changer or
combination unit.
wh DVD MENU
Displays the DVD disc menu.
wj DVD TOP MENU
Displays the top menu of the DVD disc.
Tip
The number 5, H, PROG + and A/B buttons have tactile dots. Use the tactile dots as
references when operating the TV.
15
GB
Overview of the TV buttons and indicators
Note
Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is
turned on may cause the indicator to remain lit or may cause the TV to malfunction.
1 1 – Power
Switches the TV on or off.
2 PROG +/-/ /
In TV mode: Selects the next (+) or previous
(-) channel.
In TV menu: Moves through the options up
( ) or down ( ).
3 2 +/-/ /
In TV mode: Increases (+) or decreases (-) the
volume.
In TV menu: Moves through the options right
( ) or left ( ).
4 / – Input select/OK
In TV mode (page 22): Selects the input
source from equipment connected to the TV
sockets.
In TV menu: Selects the menu or option, and
confirms the setting.
5 (page 23)
6 – Timer REC programme/Picture Off/
Timer indicator
Lights up in orange when the Timer recording
is set (page 19, 20). Lights up in red when the
recording starts.
Lights up in green when the picture is
switched off (page 31).
Lights up in orange when the timer is set
(page 31).
7 1 – Standby indicator
Lights up in red when the TV is in standby mode.
8 " – Power indicator
Lights up in green when the TV is switched on.
9 Remote control sensor/Light sensor
(page 32)
Receives IR signals from the remote.
Do not put anything over the sensor, as its
function may be affected.
PROG
MENU
16
GB
Watching TV
1 Press 1 on the TV (right side) to switch on
the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV (front) is red), press TV "/1
on the remote to switch on the TV.
2 Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3 Press the number buttons or PROG +/- to
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second and third digits
quickly.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see page 19.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
Additional operations
Watching TV
3
1
2
3
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
: Parental Lock
: Current programme is being recorded
To Do this
Switch off the TV
temporarily
(standby mode)
Press TV "/1.
Switch off the TV Press 1 on the TV (right side).
Note
To disconnect the TV completely,
pull the plug from the mains.
Switch on the TV
without sound from
standby mode
Press %. Press 2 +/- to adjust
the volume.
Adjust the volume Press 2 + (increase)/
- (decrease).
Mute the sound Press %. Press again to restore.
Access the
Programme index
table (in analogue
mode only)
Press . To select an analogue
channel, press
F/f, then press
.
To access the Input signal index
table, see page 22.
17
GB
Watching TV
To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
Text and TV picture t Text t No Text (exit the
Text service)
To select a page, press the number buttons or / .
To hold a page, press / .
To reveal hidden information, press / .
To jump a page, press and
F/f, then press (for
three digit pages).
Tips
Ensure that the TV is receiving a good signal, or some text
errors may occur.
Most TV channels broadcast a Text service. For
information on the use of the service, select the index
page.
When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
To freeze the picture – Picture freeze
You can freeze the current picture to make a note of a
telephone number or recipe.
1 Press .
The frozen picture is displayed on the right of the
screen. You can watch a moving picture on the
left.
2 Press again to return to normal TV
mode.
To change the screen format manually to
suit the broadcast
Press repeatedly to select Smart, 4:3, Wide,
Zoom, or 14:9.
Displays conventional 4:3 broadcasts with an
imitation wide screen effect. The 4:3 picture is
stretched to fill the screen.
Displays conventional 4:3 broadcasts (e.g. non-wide
screen TV) in the correct proportions.
Displays wide screen (16:9) broadcasts in the correct
proportions.
Displays cinemascopic (letter box format) broadcasts
in the correct proportions.
Displays 14:9 broadcasts in the correct proportions.
As a result, black border areas are visible on the
screen.
* Parts of the top and bottom of the picture may be cut off.
Tips
Alternatively, you can set “Auto Format” to “On”. The TV
will automatically select the best mode to suit the
broadcast (page 29).
You can adjust the position of the picture when selecting
Smart, 14:9 or Zoom. Press
F/f to move up or down
(e.g. to read subtitles).
Smart*
4:3
Wide
Zoom*
14:9*
Continued
18
GB
To use the Tools menu
Press TOOLS to display the following options when
viewing a TV programme.
* This option appears only if “i Speaker Link” is set to
“Off” (page 32).
To view two pictures simultaneously – PAP
(Picture and Picture)
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 42), and make
sure that images from the equipment appear on the
screen (page 22).
Notes
This function is not available for a PC input source.
You cannot change the size of the pictures.
1 Press TOOLS to display the Tools menu.
2 Press F/f to select “PAP”, then press .
The picture from connected equipment is
displayed on the left and the TV programme is
displayed on the right.
3 Press number buttons or PROG +/- to
select the TV channel.
To return to normal TV mode
Press or RETURN.
Tips
You can also return to normal TV mode by selecting
“Single Picture” from the Tools menu.
The picture framed in green is audible. You can switch the
audible picture by pressing
G/g.
Options Description
Close Closes the Tools menu.
PAP (or Single Picture) See page 18.
Picture Mode See page 24.
Sound Mode See page 27.
Subtitle Setting (in
digital mode only)
See page 38.
Digital Favourites (in
digital mode only)
See page 21.
Power Saving See page 31.
Sleep Timer See page 31.
i Volume* See page 32.
Auto Clock Set (in
analogue mode only)
Allows you to switch to digital
mode and obtain the time.
19
GB
Watching TV
Checking the Digital Electronic Programme Guide
(EPG) *
1 In digital mode, press to display the
Digital Electronic Programme Guide
(EPG).
2 Perform the desired operation, as shown in
the following table.
Note
Programme information will only be displayed if the TV
station is transmitting it.
* This function may not be available in some countries.
Digital Electronic Programme Guide (EPG)
To Do this
Turn off the EPG Press .
Move through the EPG Press
F/f/G/g.
Watch a current programme Press while the current programme is selected.
Sort the programme information by
category – Category list
1 Press the blue button.
2 Press
F/f/G/g to select a category. The category name is
displayed on the side.
The categories available include:
“All Categories”: Contains all available channels.
Category name (e.g. “News”): Contains all channels corresponding to the
selected category.
3 Press .
The Digital Electronic Programme Guide (EPG) now only displays the
current programmes from the category selected.
Set a programme to be recorded – Timer
REC
1 Press F/f/G/g to select the future programme you want to
record.
2 Press .
3 Press
F/f to select “Timer REC”.
4 Press to set the TV and your VCR timers.
A symbol appears by that programme’s information. The
indicator on the TV (front) lights up in orange.
Notes
You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
If an age restriction for programmes has been selected, a message asking for a
PIN code will appear on the screen. For more details refer to “Parental Lock”
on page 38.
Continued
20
GB
Tip
You can also display the Digital Electronic Programme Guide (EPG) by selecting “Digital EPG” in the “MENU” (page 23).
Set a programme to be displayed
automatically on the screen when it starts
– Reminder
1 Press F/f/G/g to select the future programme you want to
display.
2 Press .
3 Press
F/f to select “Reminder”.
4 Press to automatically display the selected programme
when the programme starts.
A c symbol appears by that programme’s information.
Note
If you switch the TV to standby mode, it will automatically turn itself on
when the programme is about to start.
Set the time and date of a programme you
want to record – Manual timer REC
1 Press .
2 Press
F/f to select “Manual timer REC”, then press .
3 Press F/f to select the date, then press g.
4 Set the start and stop time in the same way as in step 3.
5 Press
F/f to select the programme, then press .
6 Press to set the TV and your VCR timers.
A symbol appears by that programme’s information. The
indicator on the TV (front) lights up in orange.
Notes
You can set VCR timer recording on the TV only for Smartlink compatible
VCRs. If your VCR is not Smartlink compatible, a message will be displayed to
remind you to set your VCR timer.
Once a recording has begun, you can switch the TV to standby mode, but do not
switch off the TV completely or the recording may be cancelled.
If an age restriction for programmes has been selected, a message asking for a
PIN code will appear on the screen. For more details refer to “Parental Lock”
on page 38.
Cancel a recording/reminder – Timer list
1 Press .
2 Press
F/f to select “Timer list”.
3 Press F/f to select the programme you want to cancel, then
press .
4 Press
F/f to select “Cancel Timer”, then press .
A display appears to confirm that you want to cancel the programme.
5 Press G/g to select “Yes”, then press to confirm.
To Do this
1 / 1

Sony KDL-40X2000 Инструкция по применению

Категория
ЖК-телевизоры
Тип
Инструкция по применению
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ

на других языках