Yamaha RX-SL80 Руководство пользователя

AV Receiver

RX-SL80

OWNER’S MANUAL

U

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MAN'L

PUSH-ENTER

STANDBY

/ON

SILENT CINEMA VIDEO AUDIO

VIDEO 2

PHONES

OPTICALL R

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

6 Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9 A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces may

cause the product and cart combination

to overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

IMPORTANT SAFETY INSTRUCTIONS

i

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

3

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in perfor-

mance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

21 Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety

checks to determine that the product is in proper

operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the antenna

or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as

practical.

FCC INFORMATION (for US customers)

ii

1 IMPORTANT NOTICE : DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2 IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product MUST

be used. Follow all installation instructions. Failure to

follow instructions could void your FCC authorization to

use this product in the USA.

3 NOTE : This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15

for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance that

your use of this product in a residential environment will

not result in harmful interference with other electronic

devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions found

in the users manual, may cause interference harmful to the

operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 5 cm on the top,

5 cm on the left and right, and 10 cm on the back of

this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the

power cord from the wall outlet during an electrical

storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association's Consumer

Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound

come through loud and clear without annoying blaring or

distortion - and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YA M A H A and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this unit itself

is turned off. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of

power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

IMPORTANT

Please record the serial number of this unit in the space

below.

MODEL:

Serial No.:

The serial number is located on the bottom of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

iii

1

PREPARATIONINTRODUCTION

BASIC

OPERATION

SOUND FIELD

PROGRAMS

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control (AMP mode) .................................... 5

Using the remote control ........................................... 6

Front panel display .................................................... 7

SPEAKER SETUP ................................................. 8

Speaker placement ..................................................... 8

Speaker connections .................................................. 9

CONNECTIONS .................................................. 11

Before connecting components................................ 11

Connecting other components ................................. 12

Connecting the antennas.......................................... 14

Connecting the power.............................................. 15

Turning on the power............................................... 15

BASIC SETUP ...................................................... 16

Using BASIC setup.................................................. 16

PLAYBACK.......................................................... 18

Basic operations....................................................... 18

Selecting sound field programs ............................... 20

TUNING ................................................................ 22

Automatic and manual tuning.................................. 22

Presetting stations .................................................... 24

Selecting preset stations........................................... 25

RECORDING ....................................................... 27

SOUND FIELD PROGRAM

DESCRIPTIONS ...............................................28

For movie/video sources.......................................... 28

For music sources .................................................... 30

ADVANCED OPERATIONS ..............................31

Using the sleep timer ............................................... 31

Enjoying multi-channel software............................. 31

Enjoying 2-channel software ................................... 32

Virtual CINEMA DSP............................................. 33

Selecting input modes.............................................. 33

Manually adjusting speaker levels........................... 35

Using the test tone ................................................... 35

SET MENU ............................................................36

Changing parameter settings ................................... 37

1 SOUND MENU.................................................... 38

2 INPUT MENU...................................................... 41

3 OPTION MENU................................................... 42

REMOTE CONTROL FEATURES ...................44

Control area ............................................................. 44

Setting remote control codes ................................... 45

Controlling other components ................................. 46

EDITING SOUND FIELD PARAMETERS ......47

What is a sound field ............................................... 47

Sound field parameter descriptions ......................... 47

TROUBLESHOOTING .......................................49

GLOSSARY ...........................................................53

Audio formats .......................................................... 53

Sound field programs............................................... 54

Audio information ................................................... 54

Video signal information ......................................... 55

SPECIFICATIONS...............................................56

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

SOUND FIELD PROGRAMS

ADVANCED OPERATION

ADDITIONAL INFORMATION

FEATURES

2

Built-in 5-channel original Yamaha digital

power amplifier

◆ Minimum RMS output power

(0.9% THD, 1 kHz, 6Ω)

Front: 65 W + 65 W

Center: 65 W

Surround: 65 W + 65 W

Sound field features

◆ Proprietary YAMAHA technology for the creation of

sound fields

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ Dolby Digital/Dolby Digital + Matrix 6.1 decoder

◆ DTS/DTS + Matrix 6.1 decoder

◆ DTS 96/24 decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random access preset tuning

◆ Automatic preset tuning

Other features

◆ 96-kHz/24-bit D/A converter

◆ “SET MENU” which provides you with items for

optimizing this unit for your audio/video system

◆ Screen Menu display output to your TV monitor

◆ Slim-line design

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Night listening mode

◆ Remote control with preset remote control codes

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button

names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“DTS” and “DTS 96/24” are trademarks of Digital Theater

Systems, Inc.

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

FEATURES

• The following name plate is located on the bottom of this unit.

GETTING STARTED

3

INTRODUCTION

Please check that you received all of the following parts.

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery component.

1 Remove the back cover.

2 Insert the two supplied batteries (AA, R6,

UM-3) into the battery compartment.

3 Close the back cover.

Notes on batteries

• Change all of the batteries if you notice that the operation range

of the remote control has decreased.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries ran out, immediately remove them from the

remote control to prevent an explosion or acid leak.

• Dispose of the batteries according to the regional regulations.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

GETTING STARTED

Supplied accessories

1

STEREO

2

HALL

3

JAZZ

4

ROCK

SLEEP

STANDBY/ON

5

MUSIC

6

ENTERTAIN

7

TV THTR

8

MOVIE

9

TV AV

CODE SET

REC FREQ/RDS

PTY SEEK

EON

s AUDIO

w

DISC SKIP MODE START

e f

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

STANDARD

0

NIGHT

+10

EXTD SUR.

ENT

STRAIGHT

EFFECT

MUTE INPUT

–

CH

TV MODE

+

MENU

SET MENU

RETURN

TEST/

RETURN

DISPLAY

Remote control

Indoor FM antenna

(U.S.A., Canada, China, Asia

and General models)

(U.K., Europe, Australia

and Korea models)

Batteries (2)

(AA, R6, UM-3)

AM loop antenna

Remote control

Cable tags (5 pairs)

Installing batteries in the remote control

Check +/–

polarity

Press

If the remote control is without batteries for more than

3 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the remote control code and program

any acquired functions that may have been cleared.

CONTROLS AND FUNCTIONS

4

1 STANDBY/ON

Turns on this unit or sets it to the standby mode. When you

turn on this unit, you will hear a click and there will be a 4

to 5-second delay before this unit can reproduce sound.

In standby mode, this unit consumes a small amount of power in

order to receive infrared-signals from the remote control.

2 PHONES (SILENT CINEMA) jack

Outputs audio signals for headphones. When you connect

headphones, no signals are output to the speakers.

All Dolby Digital and DTS audio signals are mixed down

to the left and right headphone channels.

3 VIDEO 2 jacks

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select VIDEO 2 as the input

source.

4 Remote control sensor

Receives signals from the remote control.

5 Front panel display

Shows information about the operational status of this

unit.

6 VOLUME/SELECT

Adjusts the volume and the tone control. Also selects

stations, sound field programs or input sources (etc.) when

used together with TUNER, DSP, INPUT. If no operation

is performed within 5 seconds of pressing TUNER, DSP,

INPUT, the VOLUME/SELECT function automatically

returns to volume.

7 INPUT

Activates the input select mode.

Activates the AM, FM or preset tuning mode when

TUNER is selected as the input source.

8 DSP

Switches between the DSP sound field, STEREO and

STRAIGHT modes.

9 TUNER (AUTO/MAN’L)

Activates the tuning mode when TUNER is selected as the

input source. Press before turning VOLUME/SELECT to

tune in frequencies or preset radio stations.

Switches the AM/FM tuning mode between automatic

(“AUTO” indicator on) and manual (“AUTO” indicator

off) tuning.

CONTROLS AND FUNCTIONS

Front panel

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/ MAN' L

PUSH-ENTER

STANDBY

/ON

SILENT CINEMA

VIDEO AUDIO

VIDEO 2

PHONES

OPTICALL R

12 3 5 6

789

4

Note

CONTROLS AND FUNCTIONS

5

INTRODUCTION

Make sure that the AMP mode is selected before starting

operation.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 STANDBY/ON

Switches the unit on and sets it in the STANDBY mode.

3 DSP program / Numeric buttons

Use to select sound field programs or input numbers

according to the current control area.

4 Operation buttons

Provide functions such as play, stop, skip, etc. for use

when operating other components.

5 LEVEL

Selects the speaker channel to be adjusted and sets the

level.

6 TEST/RETURN

Outputs the test tone to adjust the speaker levels.

Returns to the previous menu level when adjusting the

SET MENU parameters.

7 MUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level.

8 AMP

Sets the remote control to the AMP mode for controlling

this unit (instead of the component selected using the

input selector buttons).

9 SLEEP

Sets the sleep timer.

0 NIGHT

Turns night listening mode on or off.

A EXTD SUR.

Switches on or off the Dolby Digital + Matrix 6.1 or DTS

+ Matrix 6.1 decoding mode.

B STRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

C CODE SET

Used to set up remote control codes.

Remote control (AMP mode)

1

STEREO

2

HALL

3

JAZZ

4

ROCK

SLEEP

STANDBY/ON

5

MUSIC

6

ENTERTAIN

7

TV THTR

8

MOVIE

9

TV AV

CODE SET

REC FREQ/RDS EON

s AUDIO

w

DISC SKIP

PTY SEEK

MODE START

e f

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

STANDARD

0

NIGHT

+10

EXTD SUR.

ENT

STRAIGHT

EFFECT

MUTE INPUT

–

CH

TV MODE

+

MENU

SET MENU

RETURN

TEST/

RETURN

DISPLAY

1

2

3

5

6

7

8

9

F

0,A,B

C

D

E

G

H

4

CONTROLS AND FUNCTIONS

6

D SET MENU

Turns the SET MENU on or off.

E Multi control section

Use to select and adjust DSP program parameters or SET

MENU items.

F VOLUME +/–

Increases or decreases the volume level.

G Input selector buttons

Use to select the input source and change the control area.

■ U.K. and Europe models only

H RDS tuning buttons

FREQ/RDS

Press this button when the unit is receiving an RDS station

to cycle the display between the PS mode, PTY mode, RT

mode, CT mode (if the station offers those RDS data

service) and/or the frequency display.

PTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

PTY SEEK START

Press this button to begin searching for a station after the

desired program type has been selected in the PTY SEEK

mode.

EON

Press this button to select a radio program type (NEWS,

INFO, AFFAIRS, SPORT) to tune in automatically.

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity such as near a bath

– high temperature such as near a heater or stove

– extremely low temperature

– dusty places

Using the remote control

30 30

1

STEREO

2

HALL

3

JAZZ

4

ROCK

SLEEP

STANDBY/ON

5

MUSIC

6

ENTERTAIN

7

TV THTR

8

MOVIE

9

TV AV

CODE SET

REC FREQ/RDS EON

s AUDIO

w

DISC SKIP MODE

PTY SEEK

START

e f

b

A/B/C/D/E

TITLE

LEVEL

ENTER

CH

–

CH

+

p

d

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

PRESET

a

u

STANDARD

0

NIGHT

+10

E

X

TD SUR

.

ENT

STRAIGHT

EFFECT

MUTE INPUT

–

CH

TV MODE

+

MENU

SET MENU

RETURN

TEST/

RETURN

DISPLAY

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MAN'L

PUSH-ENTER

STANDBY

/ON

SILENT CINEMA VIDEO AUDIO

VIDEO 2

PHONES

OPTICALL R

Approximately 6 m (20 ft)

CONTROLS AND FUNCTIONS

7

INTRODUCTION

1 Processor indicators

When any of this unit’s decoders function, the respective

indicator lights up.

2 NIGHT indicator

Lights up when you select NIGHT LISTENING mode.

3 Headphones indicator

Lights up when headphones are connected.

4 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

5 Input source indicators

A cursor lights to show the current input source.

6 VOLUME level indicators

Indicate the volume level.

7 MUTE indicator

Flashes while the MUTE function is on.

8 SLEEP indicator

Lights up while the sleep timer is on.

9 MEMORY indicator

Flashes to show a station can be stored in memory.

0 Input channel indicators

Indicates the channel components of the input digital

signal.

A LFE indicator

Lights up when the input signal contains the LFE signal.

B AUTO indicator

Shows that this unit is in the automatic tuning mode.

C TUNED indicator

Lights up when this unit is tuned into a station.

D STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the “AUTO” indicator is lit.

E HiFi DSP indicator

Lights up when you select a HiFi DSP sound field

program.

F Multi-information display

Shows the current sound field program name and other

information when adjusting or changing settings.

G SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected (see page 19).

H VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see

page 33).

I PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

J RDS indicators

(U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON lights up when an RDS station that offers the EON

data service is being received.

PTY HOLD lights up while searching for stations in the

PTY SEEK mode.

Front panel display

VCR

STEREO TUNED

PS PTY RT CT PTY HOLD EON

AUTO MEMORY

MUTE

VOLUME

SLEEP

DIGITAL

PL

MATRIX DISCRETE

PCM

VIRTUAL

NIGHT

SILENT

LFE

ft

mS

dB

L

L C R

SL SB SR

HiFi DSP

VIDEO 1 VIDEO 2

DTV/CBL

TUNER

DVD/CD

1234 5 678

IH G F A09BCDE

J

(U.K. and Europe models only)

SPEAKER SETUP

8

You can enjoy this unit with the following speaker setup to

obtain the best surround sound.

y

The speaker layout above shows the standard ITU-R* speaker

setting. ITU-R recommends that the front left and right speakers

be placed at 30° from the central listening position, and that the

surround left and right speakers be placed at between 60° and 80°

from the central listening position.

*

ITU-R: for more information (see page 54).

Front speakers (FR and FL)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Align the front

face of the center speaker with the front face of your video

monitor. Place the speaker centrally between the front

speakers and as close to the monitor as possible, such as

directly over or under it.

Surround speakers (SR and SL)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

Subwoofer

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

SPEAKER SETUP

Speaker placement

60˚

30˚

FL

FR

C

SL

SR

80˚

SL

1.8 m (6 ft)

9

SPEAKER SETUP

PREPARATION

Be sure to connect the left channel (L), right channel (R),

“+” (colored) and “–” (black) properly. If the connections

are faulty, no sound will be heard from the speakers, and if

the polarity of the speaker connections is incorrect, the

sound will be unnatural and lack bass.

• Before connecting the speakers, make sure that the

power of this unit is off.

• Do not let the bare speaker wires touch each other or do

not let them touch any metal part of this unit. This

could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of

speakers still creates the interference with the monitor,

place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+”

(colored) terminals on this unit and your speaker. Connect

the plain cable to the “–” (black) terminals.

1 Remove approximately 10 mm (3/8") of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable together

to prevent short circuits.

3 Press and hold the tab to insert the speaker

wire.

4 Return the tab to secure the wire.

■ Cable tags

5 pairs of different colored cable tags are provided with

this product. The colors of the cable tags and their

respective speaker cables are as follows:

• Red: Front right speaker cable

• White: Front left speaker cable

• Green: Center speaker cable

• Gray: Surround right speaker cable

• Blue: Surround left speaker cable

To make it easier to distinguish the various speaker cables,

attach the colored tags to the appropriate speaker cables as

shown below.

Speaker connections

CAUTION

10 mm (3/8")

1

2

R

L

Colored: positive (+)

Black: negative (–)

10

SPEAKER SETUP

■ Speaker connections

■ FRONT terminals

Connect your speaker system to these terminals.

■ SURROUND terminals

Connect surround speakers to these terminals.

■ CENTER terminals

Connect a center speaker to these terminals.

■ SUBWOOFER OUTPUT jack

Connect a subwoofer with built-in amplifier, such as the

YAMAHA Active Servo Processing Subwoofer System,

to this jack.

y

You can easily distinguish between the cable pairs by attaching a

supplied cable tag to each end of the respective speaker cable (see

page 9).

• If you are not using a subwoofer, allocate the signals to the front

left and right speakers by changing the setting item “LFE/Bass

Out” to FRONT on the SOUND menu (see page 39).

• Use the control on the subwoofer to adjust its volume level. You

can also adjust the volume level using this unit’s remote control

(see page 35).

AM ANT FM ANT

75

Ω

UNBAL

OPTICAL

DVD

/CD

DTV

/CBL

VIDEO 1

FRONT

R

CENTER SURROUND

123

COAXIAL

GND

TUNER

AUDIO

OUTPUT

SPEAKERS

MAINS

DIGITAL

INPUT

L R L

–

+

–

+

VIDEO

R

L

VIDEO 1

R

L

DTV/CBL

DVD/CD

VIDEO MONITOR

SUBWOOFER

VCR OUT

VCR IN

12 435

6

Center

speaker

Front

speakers

Surround

speakers

Subwoofer

with

built-in

amplifier

Right LeftRight Left

This jack is reserved for factory use.

Do not connect any equipment to

this jack.

Notes

6

1

2

5

4

3

Speaker layout

CONNECTIONS

11

PREPARATION

Do not connect this unit or other components to the mains

power until all connections between components are

complete.

• Make sure that all connections are made correctly - that

is to say, L (left) to L, R (right) to R, “+” to “+” and

“–” to “–”. Some components require different

connection methods and have different jack names.

Refer to the operating instructions for each component

you wish to connect to this unit.

• After you have completed all connections, check them

again to make sure they are correct.

• The jack names correspond to the names on the input

selector.

■ Signal directions and cable indications

■ Analog jacks

You can input analog signals from audio components by

connecting audio pin cable to the analog jacks on this unit.

Connect red plugs to the right jacks and white plugs to the

left jacks.

■ Digital jacks

This unit has digital jacks for direct transmission of digital

signals through either coaxial or fiber optic cables. You

can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. All digital input jacks are compatible

with 96-kHz sampling digital signals.

• This unit handles digital and analog signals independently. Thus

audio signals input to the digital (OPTICAL or COAXIAL)

jacks are not output to the analog VCR OUT (REC) jacks.

• The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard, this unit may not function properly.

Dust protection cap

Pull out the cap from the optical jack before you connect

the fiber optic cable. Do not discard the cap. When you are

not using the optical jack, be sure to put the cap back in

place. This cap protects the jack from dust.

CONNECTIONS

Before connecting components

CAUTION

S

V

O

V

L

R

C

video signal direction

left analog cables

right analog cables

optical cables

coaxial cables

video cables

For analog signals

For digital signals

For video signals

audio signal direction

Notes

12

CONNECTIONS

■ Connections for DVD playback

Connect your DVD player and video monitor to the jacks on the rear panel of this unit.

You may experience some image distortion if your DVD player is connected to this unit through your VCR rather than being directly

connected to this unit.

■ Connections for other AV components

Connect the desired component(s) to the jacks on the rear panel of this unit.

y

You can assign how this unit’s DIGITAL INPUT jacks correspond to the component to be used if this unit’s initial settings do not meet

your needs (see page 41).

Connecting other components

Note

AM ANT FM ANT

75Ω UNBAL

OPTICAL

DVD

/CD

DTV

/CBL

VIDEO 1

123

COAXIAL

GND

TUNER

AUDIO

OUTPUT

SP

E

DIGITAL

INPUT

VIDEO

R

L

VIDEO 1

R

L

DTV/CBL

DVD/CD

VIDEO MONITOR

SUBWOOFER

VCR OUT

VCR IN

LR

O

DVD player

Video

monitor

Optical out

Video out

Audio out

Video in

AM ANT FM ANT

75Ω UNBAL

OPTICAL

DVD

/CD

DTV

/CBL

VIDEO 1

123

COAXIAL

GND

TUNER

AUDIO

OUTPUT

SP

E

DIGITAL

INPUT

VIDEO

R

L

VIDEO 1

R

L

DTV/CBL

DVD/CD

VIDEO MONITOR

SUBWOOFER

VCR OUT

VCR IN

LR

O

LR LR

DTV or cable

tuner

VCR

Optical out

Video out

Audio in

Audio out

Video out

Video in

13

CONNECTIONS

PREPARATION

■ VIDEO 2 jacks (on the front panel)

Use these jacks to connect any video source, such as a game console or video camera, to this unit.

VIDEO AUDIO

VIDEO 2

OPTICALL R

O

V

L

R

Game console

or video

camera

Video out

Audio out L

Audio out R

Optical out

14

CONNECTIONS

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Lift up the tab and insert the white cord into

the AM ANT terminal and the black cord into

the GND terminal.

3 Orient the AM loop antenna for the best

reception.

• The AM loop antenna should be placed away from this unit and

all speaker cords.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality, an

outdoor antenna may improve the quality. Consult the nearest

authorized YAMAHA dealer or service center about outdoor

antennas.

■ Frequency Step (Asia and General

models only)

Because the interstation frequency spacing differs in

different areas, set the FREQUENCY STEP (using SET

MENU) according to the frequency spacing in your area

(see page 43).

• North, Central and South America: 100 kHz/10 kHz

• Other areas: 50 kHz/9 kHz

Connecting the antennas

AM ANT FM ANT

75Ω UNBAL

GND

TUNER

AM loop antenna

(included)

Ground (GND terminal)

For minimum interference, connect the

antenna

GND terminal to a good earth

ground. A good earth ground is a metal

stake driven into moist earth.

Indoor FM antenna

(included)

Black

White

AM ANT

terminal

Tab

GND terminal

Cable wires

White

Black

Cable wires

Notes

15

CONNECTIONS

PREPARATION

■ Connecting the AC power

After all other connections are complete, plug the power

cord to an AC wall outlet.

■ Memory back-up

The memory back-up circuit prevents the stored data from

being lost even if this unit is in the standby mode.

However if the power cord is disconnected from the AC

wall outlet, or the power supply is cut for more than one

week, the stored data will be lost.

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON on the front panel or

remote control to turn on the power of this

unit.

The level of the main volume, and then the current

sound field program name appear in the front panel

display.

2 Turn on the video monitor connected to this

unit.

Connecting the power Turning on the power

INPUT

VOLUME/SELECT

DSPTUNER

AUTO/MA N'L

PUSH-ENTER

STANDBY

/ON

SILENT CINEMA VIDEO AUDIO

VIDEO 2

PHONES

OPTICALL R

1

STEREO

2

HALL

3

JAZZ

4

ROCK

SLEEP

STANDBY/ON

5

MUSIC

6

ENTERTAIN

7

TV THTR

8

MOVIE

9

TV AV

CODE SET

REC FREQ/RDS EON

s AUDIO

DISC SKIP

MODE

PTY SEEK

START

STANDARD

0

NIGHT

+10

EXTD SUR.

ENT

STRAIGHT

EFFECT

1

or

STANDBY

/ON

STANDBY/ON

or

Front panel

Remote control

BASIC SETUP

16

The BASIC setup feature is a useful way to set up your

system quickly and with minimal effort. The BASIC setup

items are displayed on both the front panel of this unit and

your video monitor. By using the Screen Menu on your

video monitor, you can easily make any necessary

settings.

y

• If you wish to configure the unit manually using more precise

adjustments, use the detailed parameters in SOUND MENU

(page 38) instead of using BASIC SETUP.

• Altering the parameters in BASIC SETUP may cause some of

the parameters in SOUND MENU to be overwritten.

• The explanations in this document are based on the Screen

Menu. The characters shown in the front panel display may

differ from those on the Screen Menu.

■ Speaker set up

1 Switch on the receiver and video monitor.

2 Press AMP.

3 Press SET MENU.

The top display appears on your video monitor.

4 Press / to select BASIC SETUP, then

press ENTER.

5 Press / repeatedly to select ROOM.

Use / to select the size of the room you have

installed your speakers in. Roughly speaking, the

room sizes are defined as follows:

[U.S.A. and Canada models]

S (small) 16 x 13 ft, 200 sq. ft

(4.8 x 4.0 m, 20 m

2

)

M (medium) 20 x 16 ft, 300 sq. ft

(6.3 x 5.0 m, 30 m

2

)

L (large) 26 x 19 ft, 450 sq. ft

(7.9 x 5.8 m, 45 m

2

)

[Other models]

S (small) 3.6 x 2.8 m, 10 m

2

M (medium) 4.8 x 4.0 m, 20 m

2

L (large) 6.3 x 5.0 m, 30 m

2

BASIC SETUP

Using BASIC SETUP

b

TITLE

LEVEL

ENTER

CH

–

CH

+

p

MUTE

TV VOL VOLUME

AMP

VCRDVD/CD VIDEO 1

TUNERDTV/CBL VIDEO 2

a

MUTE INPUT

–

CH

TV MODE

+

MENU

SET MENU

RETURN

TEST/

RETURN

DISPLAY

3

4-9

2

AMP

MENU

SET MENU



SET MENU

.;BASICSETUP

;MANUALSETUP

[]/[]:Up/Down

[ENTER]:Enter

p

ENTER

; BASIC SETUP

.ROOM : )S M L

SWFR : YES)NONE

SPEAKERS;;;;5spk

SET )CANCEL

[]/[]:Up/Down

[<]/[>]:Select

p

Страница загружается ...

Yamaha RX-SL80 Руководство пользователя

Yamaha RX-SL80 Руководство пользователя

на других языках

Похожие модели бренда