Yamaha 580 Инструкция по применению

DSP

PRO LOGIC

TAPE

MONITOR

PROGRAM EFFECT

NATURAL SOUND DIGITAL SOUND FIELD PROCESSOR

AMPLIFIER DSP-E580

CONTENTS

PRECAUTIONS & SAFETY INSTRUCTIONS ....................Inside Front Cover

SETUP & ADJUSTMENT..................................................................................3

1-1. GETTING STARTED.................................................................................3

1-2. SETUP.......................................................................................................8

1-3. CONTROLS & ADJUSTMENTS.............................................................18

1-4. ADJUSTMENT.........................................................................................21

GENERAL OPERATION.................................................................................24

2-1. PLAYING A SOURCE.............................................................................24

2-2. DIGITAL SOUND FIELD PROGRAMS ..................................................25

2-3. SELECTING SOUND FIELD PROGRAMS............................................25

2-4. MUTING THE EFFECT SOUND ............................................................25

2-5. SUPERIMPOSED VIDEO PROGRAM/PARAMETER

DISPLAY..................................................................................................25

2-6. DESCRIPTIONS OF THE SOUND FIELD PROGRAMS......................26

CREATING YOUR OWN SOUND FIELDS....................................................30

3-1. SELECTING AND EDITING PROGRAM PARAMETERS ....................30

3-2. DESCRIPTIONS OF THE DIGITAL SOUND FIELD

PARAMETERS........................................................................................32

TROUBLESHOOTING ....................................................................................34

SPECIFICATIONS...........................................................................................35

OPERATION MANUAL

DIGITAL SOUND FIELD PROCESSING AMPLIFIER

1 Read Instructions – All the safety

and operating instructions should be read

before the unit is operated.

2 Retain Instructions – The safety and

operating instructions should be retained

for future reference.

3 Heed Warnings – All warnings on the

unit and in the operating instructions

should be adhered to.

4 Follow Instructions – All operating

and other instructions should be followed.

5 Water and Moisture – The unit

should not be used near water – for

example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc.

6 Carts and Stands – The unit should

be used only with a cart or stand that is

recommended by the manufacturer.

6A A unit and cart combination should

be moved with care. Quick

stops, excessive force, and

uneven surfaces may

cause the unit and cart

combination to overturn.

7 Wall or Ceiling Mounting – The unit

should be mounted to a wall or ceiling

only as recommended by the

manufacturer.

8 Ventilation – The unit should be

situated so that its location or position

does not interfere with its proper

ventilation. For example, the unit should

not be situated on a bed, sofa, rug, or

similar surface, that may block the

ventilation openings; or placed in a built-

in installation, such as a bookcase or

cabinet that may impede the flow of air

through the ventilation openings.

9 Heat – The unit should be situated

away from heat sources such as

radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be

connected to a power supply only of the

type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-

supply cords should be routed so that

they are not likely to be walked on or

pinched by items placed upon or against

them, paying particular attention to cords

at plugs, convenience receptacles, and

the point where they exit from the unit.

12 Cleaning – The unit should be

cleaned only as recommended by the

manufacturer.

13 Nonuse Periods – The power cord of

the unit should be unplugged from the

outlet when left unused for a long period

of time.

14 Object and Liquid Entry – Care

should be taken so that objects do not fall

into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The

unit should be serviced by qualified

service personnel when:

A. The power-supply cord or the plug

has been damaged;

B. Objects have fallen, or liquid has

been spilled into the unit;

C. The unit has been exposed to rain;

D. The unit does not appear to operate

normally or exhibits a marked change in

performance;

E. The unit has been dropped, or the

cabinet damaged.

16 Servicing – The user should not

attempt to service the unit beyond those

means described in the operating

instructions. All other servicing should be

referred to qualified service personnel.

17 Power Lines – An outdoor antenna

should be located away from power lines.

18 Grounding or Polarization –

Precautions should be taken so that the

grounding or polarization is not defeated.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

IMPORTANT!

Please record the serial number of this

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear

of the unit.

Retain this Owner’s Manual in a safe

place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

PRECAUTIONS & SAFETY INSTRUCTIONS

1 To ensure the finest performance,

please read this manual carefully. Keep it in

a safe place for future reference.

2 Install your unit in a cool, dry, clean

place – away from windows, heat sources,

and too much vibration, dust, moisture or

cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock,

do not expose to rain and water.

3 Do not operate the unit upside-down. It

may overheat, possibly causing damage.

4 Never open the cabinet. If a foreign

object drops into the set, contact your

dealer.

5 Do not use force on switches, knobs or

cords. When moving the set, first turn the

unit off. Then gently disconnect the power

plug and the cords connecting to other

equipment. Never pull the cord itself.

6 Do not attempt to clean the unit with

chemical solvents; this might damage the

finish. Use a clean, dry cloth.

7 Always set the volume control to “–

∞

”

while lowering the tonearm to play a record;

turn the volume up with the stylus in the

groove.

8 Be sure to read the “Troubleshooting”

section on common operating errors before

concluding that your unit is faulty.

9 Do not connect audio equipment to the

AC outlets on the rear panel if that

equipment requires more power than the

outlets are rated to provide.

We Want You Listening

For A Lifetime

YAMAHA and the Electronic Industries

Association’s Consumer Electronics

Group want you to get the most out of

your equipment by playing it at a safe

level. One that lets the sound come

through loud and clear without annoying

blaring or distortion – and, most

importantly, without affecting your

sensitive hearing. Since hearing damage

from loud sounds is often undetectable

until it is too late, YAMAHA and the

Electronic Industries

Association’s Consumer

Electronics Group

recommend you to avoid

prolonged exposure from

excessive volume levels.

PRECAUTIONS

FCC INFORMATION

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this

manual, meets FCC requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/or another

product use only high quality shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Failure to follow instructions

could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements

listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of assurance that your use of

this product in a residential environment will not result in harmful interference

with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not

occur in all installations. If this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits

or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the

antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type

cable.

If these corrective measures do not produce satisfactory results, please contact

the local retailer authorized to distribute this type of product. If you can not

locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A.

6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha

Corporation of America or its subsidiaries.

Congratulations!

You are the proud owner of a Yamaha Digital Sound Field Processing (DSP) System—an

extremely sophisticated audio component. The DSP system takes full advantage of Yamaha’s

undisputed leadership in the field of digital audio processing to bring you a whole new world

of listening experiences. Follow the instructions in this manual carefully when setting up your

system, and the DSP system will sonically transform your room into a wide range of listening

environments—anything from a famous concert hall to a cozy jazz club. In addition, you get

incredible realism from Dolby-Surround encoded video sources using the built-in Dolby Pro

Logic Surround Decoder.

Rather than tell you about the wonders of digital sound field processing, however, let’s get

right down to the business of setting up the system and trying out its many capabilities.

Please read this operation manual carefully and store it in a safe place for later reference.

1-1. GETTING STARTED

Unpacking

If you haven’t already done so, carefully remove this unit and its

accessories from the box and wrapping material. You should find the

unit itself and the following accessories.

Installing the Remote Control Unit Batteries

Since the remote control unit will be used for many of this unit’s

control operations, you should begin by installing the supplied

batteries.

1. Turn the remote control unit over and slide the battery

compartment cover downward in the direction of the arrow.

2. Insert the batteries (R6, AA, UM-3 type), being careful to align

them with the polarity markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

SETUP & ADJUSTMENT

Remote control

Batteries

Pin cable, audio x 2 Pin cable, video

●

When you notice that remote control operation has become

erratic, or the distance from which the remote control will function

has decreased, it’s time to replace the batteries. Always replace

all batteries at the same time.

●

This remote control uses an advanced, highly directional infrared

beam. Be sure to aim the remote control directly at the remote

control sensor on the main unit when operating.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote

control transmitter and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter to work

incorrectly. In this case, reposition the main unit to avoid

direct lighting.

Digital Sound Field Processing

What is it that makes live music so good? Today’s advanced

sound reproduction technology lets you get extremely close to the

sound of a live performance, but chances are you’ll still notice

something missing, the acoustic environment of the live concert hall.

Extensive research into the exact nature of the sonic reflections that

create the ambience of a large hall has made it possible for Yamaha

engineers to bring you this same sound in your own listening room,

so you’ll feel all the sound of a live concert. What’s more, our

technicians, armed with sophisticated measuring equipment, have

even made it possible to capture the acoustics of a variety of actual

concert halls, jazz clubs, theaters, etc. from around the world, to

allow you to accurately recreate any one of these live performance

environments, all in your own home.

30°

Remote control

sensor

Within approximately

7 m (23 feet)

Dolby Pro Logic Surround

The Dolby Pro Logic Surround Decoder program lets you

experience the dramatic realism and impact of Dolby Surround movie

theater sound in your own home. Dolby Pro Logic gets its name from

its professional-grade steering logic circuitry, which provides greater

effective channel separation for a much higher degree of realism than

the “passive” Dolby Surround circuits found in today’s typical home

audio/video equipment. Dolby Pro Logic Surround provides a true

center channel, so that there are four independent channels, unlike

passive Dolby Surround, which has in effect only three channels: left,

right, and rear. This center channel allows listeners seated in even

less-than-ideal positions to hear the dialog originating from the action

on the screen while experiencing good stereo imaging.

This Dolby Pro Logic Surround Decoder employs a digital signal

processing system. This system improves the stability of sound at

each channel and crosstalk between channels, so that positioning of

sounds around the room is more accurate compared with

conventional analog signal processing systems.

In addition, this unit features a built-in automatic input balance

control. This always assures you the best performance without

manual adjustment.

Manufactured under license from Dolby Laboratories Licensing

Corporation. Additionally licensed under one or more of the following

patents: U.S. number 3,959,590; Canadian numbers 1,004,603 and

1,037,877. “Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories Licensing Corporation.

Dolby Pro Logic Surround + DSP

Additionally you can enjoy sound environment created by the

combination of Dolby Pro Logic and YAMAHA DSP.

Precise sound

movement and orientation by the Dolby Pro Logic technology is

added to sound fields which are precisely recreated on the

basis of actual acoustic environments by the DSP technology,

so it is suitable for any Audio/Video source with video image.

This combination is used on sound field programs No.5 through

No.14, and No.16.

The YAMAHA “CINEMA DSP” logo indicates these programs

created by the combination of Dolby Pro Logic and YAMAHA DSP

technology.

Setting Up Your Speaker System

This unit has been designed to provide the best sound field

quality with a full five-speaker system setup, using one extra pairs of

effect speakers to generate the sound field plus one center speaker

for dialog, when using Dolby Pro Logic Surround decoding. We

therefore recommend that you use a five-speaker setup. A four-

speaker system using only one pair of effect speakers for the sound

field will still provide impressive ambience and effects, however, and

may be a good way to begin with this unit. You can always upgrade

to the full five speaker system later.

Use of the Center Dialog Speaker Is Recommended

With digital sound field programs No. 5 through No. 16, by using

either the Directional Enhancement circuit or the Dolby Pro Logic

decoder, decoded signals will be output from the center channel.

Therefore, if you want to upgrade the Audio/Video home theater

system, it is recommended to use the center speaker unit.

If for some reason it is not practical to use a center speaker, it is

possible to enjoy movie viewing without it. Best results, however, are

obtained with the full system.

It is also possible to further expand your system with the addition

of a subwoofer and amplifier. You may wish to choose the

convenience of a Yamaha Active Servo Processing Subwoofer

System, which has its own built-in power amp.

5 Speaker System

This is the recommended speaker

system, providing the best sound

effects.

With sound field programs No. 1

through No. 4, using effect speakers

reproduces the effective sound field.

With the sound field programs No. 5

through No. 16, the center speaker

provides precise center localization.

Center Mode—Set to NRML or WD.

(See page 23.)

4 Speaker System

Simple system without center

speaker.

With sound field programs No. 1

through No. 4, a sound effect matching

that of a 5-speaker system can be

obtained. With sound field programs No.

5 through No. 16, center sound is output

from the left and right main speakers.

Center Mode—Set to PHNTM.

(See page 23.)

Speakers and Speaker Placement

Your full five-speaker system will require two speaker pairs: the

MAIN SPEAKERS (your normal stereo speakers) and the REAR

EFFECT SPEAKERS, plus the CENTER SPEAKER. You may also

be using a subwoofer.

You will probably use your present stereo speakers as the MAIN

SPEAKER pair. The rear effect do not need to be equal with the

MAIN SPEAKERS, although the center speaker should be as close

as possible. They should have enough power handling capacity to

accept the maximum output of the DSP system or the external amps

that will drive them.

Place the MAIN SPEAKERS in the normal position.

Place the REAR EFFECT SPEAKERS behind your listening

position. They should be nearly six feet up from the floor.

Place the CENTER SPEAKER precisely between the two MAIN

SPEAKERS. (To avoid interference, keep the speaker above or

below the television monitor, or use a magnetically shielded speaker.)

If using a SUBWOOFER, such as a Yamaha Active Servo

Subwoofer System, the position of the speaker is not so critical

because low bass tones are not highly directional.

Main speaker Rear effect speaker Center speaker

1-2. SETUP

Before you start making connections make sure all related electronic components are turned OFF.

REAR PANEL

SINGLE

DUALDUAL

INPUT

TAPE

OUTPUT

SINGLE

10dB 0dB

To AC outlet

15 7

9 D

2 3 4 6 8

0 A CB

(General Model)

1 Main Level Switch

Normally set to “0 dB”. If desired, you can decrease the main-

channel line output level at the MAIN OUTPUT jacks by 10 dB by

setting this switch to “–10 dB”.

2 Main Output Jacks

Main-channel line output. Connected to input jacks of external

stereo power amplifier (MAIN IN or AUX or TAPE PLAY jacks of

integrated amplifier or receiver).

3 Center Output Jack

Center-channel line output. Can be connected to input jack of an

external power amplifier driving the center speaker.

4 Rear Effect Output Jacks

Rear-channel line output. Can be connected to input jacks of an

external stereo power amplifier driving the rear effect speakers.

5 Center Speaker Terminals

When using the built-in center-channel amplifier, connect the

center speaker(s) here.

6 Rear Effect Speaker Terminals

When using the built-in rear-channel amplifier, connect the rear

effect speakers here.

7 Unswitched AC Outlet

You may plug another component into this socket as long as its

power consumption does not exceed the specified value

shown. “Unswitched” means that power is available even when

this unit is off.

8 Switched AC Outlet (U.S.A., Canada and General Model)

The power consumption of a component plugged into this

socket should not exceed the specified value shown.

“Switched” means that component is turned on and off by this

unit’s power switch.

9 Input Jacks

Accept input from a preamplifier, the “PRE OUT” or “TAPE REC”

outputs from an integrated amplifier, or direct input from a line-

level source.

0 Tape Rec Out and Playback Jacks

Connect the inputs and outputs of a stereo tape deck for

convenient recording and playback via this unit (the effect sound

cannot be recorded).

A Low Pass Jack

When using a subwoofer, connect its amplifier input to this jack.

Frequencies below 200 Hz from the left main, right main and

center channels are output to this jack.

B Video Superimpose Input/Output Jacks

Used to display this unit’s current operating status on your video

monitor, superimposed on the picture. Connect the VIDEO OUT

jack to the VIDEO IN jack of your monitor. Connect your

integrated amplifier or control amplifier equipped with video signal

output jacks or video signal source to the VIDEO IN jack.

Alternatively, the S VIDEO OUT and S VIDEO IN jacks can be

used for higher resolution and improved picture quality if your

monitor and video signal source are equipped with S connectors.

C Video NTSC/PAL Switch (General Model only)

Set this switch to the position corresponding to the standard

that your video equipment employs.

D Voltage Selector (General Model only)

Be sure to set to the line voltage in your area before applying

power. Consult your dealer if unsure of the correct setting.

NOTE: Even if an external power amplifier is connected to the REAR

or CENTER line output jacks, the corresponding internal amplifier will

not be turned off and output will be available at the speaker

terminals.

VIDEO SUPERIMPOSE

If you connect your video monitor to this unit and send video

signals to the video monitor via this unit, you can take advantage

of this unit’s capability to display program titles, parameter data

and information about other various settings and adjustments on

your video monitor’s screen. This information will be

superimposed over the video image.

If no video signal is input to this unit, the information will be

displayed over a blue colored background.

NOTE: The program titles, parameter data and other information

are also displayed on the display panel of this unit.

CONCERT HALL

DSP

P01 CONCERT HALL

CONNECTING AN INTEGRATED STEREO

AMPLIFIER OR STEREO RECEIVER TO THIS UNIT

Using an Integrated Amplifier or Stereo Receiver with PRE OUT

and MAIN IN Terminals

Some integrated amplifiers and stereo receivers have PRE OUT

and MAIN IN jacks which permit the preamplifier and power amplifier

sections to function independently. If your integrated amplifier or

stereo receiver has these jacks, begin by removing the jumpers that

connect the PRE OUT and MAIN IN jacks (or decouple the

preamplifier and power amplifier using the appropriate switch—refer

to your amplifier or receiver operation manual).

Connect the amplifier’s PRE OUT jacks to this unit’s INPUT jacks

with a stereo pin cable. Make sure that the “L” output from the

amplifier is connected to the “L” input on this unit, and that the “R”

output from the amplifier is connected to the “R” input on this unit.

Connect the MAIN OUTPUT jacks on this unit to the MAIN IN

jacks on your integrated amplifier or receiver with a second stereo pin

cable—making sure to connect the left and right channels correctly.

Connect the MAIN speakers to the speaker output terminals of your

integrated amplifier or receiver.

INPUT

TAPE

OUTPUT

10dB 0dB

MAIN

PRE

OUT

Main Speaker L Main Speaker R

Integrated Amp

Using an Integrated Amplifier or Stereo Receiver that Does Not

Have PRE OUT and MAIN IN Terminals

If your integrated amplifier is NOT equipped with PRE OUT and

MAIN IN jacks, this unit must be connected to the amplifier or receiver

TAPE jacks. This unit provides additional TAPE PB and REC OUT

jacks so you will still have a place to connect your tape deck.

Connect the amplifier or receiver TAPE REC (or TAPE OUT) jacks

to this unit’s INPUT jacks with a stereo pin cable. Make sure that the

“L” output from the amplifier or receiver is connected to the “L” input

on this unit, and that the “R” output from the amplifier or receiver is

connected to the “R” input on this unit.

Connect the MAIN OUTPUT jacks on this unit to auxiliary (AUX)

input jacks, or the TAPE PLAY (or TAPE IN) jacks on your amplifier or

receiver with a second stereo pin cable—making sure to connect the

left and right channels correctly. Connect the MAIN speakers to the

speaker output terminals of the amplifier or receiver.

NOTE: If your system includes a tape deck which has been displaced

by connecting this unit to the TAPE jacks, reconnect your tape deck to

this unit’s TAPE PB and REC OUT jacks. REC OUT from this unit

goes to the INPUT jacks on your tape deck, and this unit’s TAPE PB

jacks should be connected to the tape deck’s OUTPUT jacks.

Main Speaker L

Main Speaker R

Integrated Amp

AUX or Tape Play (or Tape In)

INPUT

TAPE

OUTPUT

10dB 0dB

INPUTOUTPUT

Tape Rec or Tape Out

Tape Deck

CONNECTING A COMPONENT PREAMPLIFIER TO

THIS UNIT

Connect the PRE OUT jacks of the preamplifier (control amplifier)

to this unit’s INPUT jacks with a stereo pin cable. Make sure that the

“L” output from the preamplifier is connected to the “L” input on this

unit, and that the “R” output from the preamplifier is connected to the

“R” input on this unit.

Connect the MAIN OUTPUT jacks on this unit to the INPUT jacks

of a stereo power amplifier with a second stereo pin cable—making

sure to connect the left and right channels correctly. Connect the

MAIN speakers to the speaker output terminals of the power

amplifier.

Main Speaker L Main Speaker R

Control Amplifier

Power Amplifier

INPUT

TAPE

OUTPUT

10dB 0dB

INPUTPRE

OUT

CONNECTING TO VIDEO SIGNAL JACKS

If your integrated amplifier or similar component is equipped with

a video output jack, connect it to this unit’s VIDEO IN jack, and

connect this unit’s VIDEO OUT jack to the video input of your

monitor.

* If your integrated amplifier or similar component is not equipped

with any video output jack, connect the video output jack of your

video cassette recorder or another video source to this unit’s

VIDEO IN jack directly.

If your integrated amplifier, video cassette recorder, etc. and your

monitor are equipped with “S” (high-resolution) video terminals,

connect the “S” video output from your integrated amplifier or video

source to this unit’s S VIDEO IN jack, and connect this unit’s S

VIDEO OUT jack to the “S” video input of your monitor.

NOTE: If video signals are sent to both S VIDEO input and VIDEO

input jacks, the signals will be sent to their respective output jacks

independently.

NOTE: If your unit is the General Model, be sure the NTSC/PAL

switch has been correctly set to the standard that your video

equipment employs. U.S.A. and Canada models have no switch and

use the NTSC standard, while other models without a switch use the

PAL standard.

Notes about the Video superimpose

●

If you watch a video source which is connected to both S VIDEO

and VIDEO input jacks of this unit, signals of screen display

information are output from only the S VIDEO OUT jack.

●

When no video signal is input to either S VIDEO IN and VIDEO IN

jacks of this unit, signals of screen display information are output

from both S VIDEO OUT and VIDEO OUT jacks with a color

background.

* For the General Model, if the NTSC/PAL switch on the rear panel

is set to “PAL”, nothing will be output from either S VIDEO OUT or

VIDEO OUT jack in this case.

Integrated Amplifier etc.

Monitor TV

VIDEO

OUT

S VIDEO

OUT

VIDEO

S VIDEO

CONNECTING SPEAKER SYSTEMS

Connect the SPEAKERS terminals to your speakers with wire of

the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the

polarity of the speaker wires is correct, that is, + and – markings are

observed. If these wires are reversed, the sound will be unnatural

and will lack bass. Do not let the bare speaker wires touch each

other or any other metal part as this could damage this unit and/or

speakers.

NOTE: Use speakers with the specified impedance shown on the

rear of this unit.

Red: positive (+)

Black: negative (–)

➀ Press down the tab.

➁ Insert the bare wire.

[Remove approx. 5mm (1/4”)

insulation from the speaker

wires.]

➂ Press up the tab and secure

the wire.

CONNECTING THE REAR EFFECT SPEAKERS TO

THIS UNIT

Connect the REAR effect speakers to the REAR SPEAKERS

terminals of this unit.

NOTE: If for some reason, you wish to use an external power amp

for the rear effect channel, connect the REAR OUTPUT jacks to the

INPUT jacks of the external amp and connect the rear effect speaker

pair to the speaker terminals of the external amp.

SINGLE

DUALDUAL

SINGLE

Rear Effect

Speaker

Rear Effect

Speaker

➀

➁

➂

CONNECTING THE CENTER SPEAKER(S) TO THIS

UNIT

Connect the CENTER speaker to the CENTER SPEAKERS

terminals. One or two CENTER speakers can be connected to this

unit. For the respective connections, follow the methods figured

below. If, however, you will not be using a CENTER speaker, be sure

to set the Center Mode to “PHNTM” (phantom). (See page 23.)

For connecting one CENTER speaker

For connecting two CENTER speakers

NOTE: If for some reason, you wish to use an external power amp

for the center channel, connect the CENTER OUTPUT jack to the

INPUT jack of the external amp and connect the center speaker to

the speaker terminals of the external amp.

SINGLE

DUALDUAL

SINGLE

DUALDUAL

SINGLE

Center speaker

Center speaker Center speaker

ADDING A SUBWOOFER

You may wish to add a subwoofer to reinforce the bass

frequencies.

This unit provides a line-level subwoofer output, which contains

only the frequencies under 200 Hz from the main and center

channels. Connect the LOW PASS jack to the INPUT jack of the

subwoofer amplifier, and connect the speaker terminals of the

subwoofer amplifier to the subwoofer.

With some subwoofers, including the Yamaha Active Servo

Processing Subwoofer System, the amplifier and subwoofer are in

the same unit.

OUTPUT

10dB 0dB

Subwoofer system

1-3. CONTROLS & ADJUSTMENTS

FRONT PANEL

NATURAL SOUND DIGITAL SOUND FIELD PROCESSOR

AMPLIFIER DSP-E580

TAPE

MONITOR

PROGRAM EFFECT

DSP

PRO LOGIC

123456

7 8

(General Model)

Страница загружается...

Yamaha 580, DSP-E580 Инструкция по применению

Похожие модели бренда