Do not attempt to repair, adjust or replace parts in the appliance. Repair the
malfunctioning appliance in the nearest service center.
If the product has been exposed to temperatures below 0ºC for some time it should
be kept at room temperature for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product
design without prior notice, unless such changes influence significantly the product
safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as in
accompanying documents in the following format XX.XXXX where first two figures XX
is the month of production, and following four figures XXXX is the year of production.
VACUUM CLEANER ASSEMBLING
The device is to serve for cleaning of a dust of premises, furniture, cars, drapes,
cracks, decorative surfaces.
Insert the flexible hose into the air inlet and press until it clicks into proper position.
To remove the hose, press the button on hose base, then pull to remove it from the
attachment point.
Extend the telescopic tube to the desired length.
Insert the hose into the tube.
Attach a nozzle to the tube:
Floor brush is intended for cleaning bare floor and floor coverings.
Crevice-Furniture nozzle is for cleaning sofa, curtain or dust on the decorative
surfaces, corners and between cushions. To clean furniture and decorative surfaces
turn the nozzle in the arrow shown direction.
INSTRUCTION FOR USE
Before starting, unwind the cord to sufficient length and insert the plug into the
power supply. The yellow mark on the cord shows optimal cord length. Do not unwind
the cord beyond the red mark.
Press On/Off button to switch the unit on and press again to stop it.
You can adjust the air flow using the air flow regulator on the flexible hose
handle:decrease flow for cleaning curtains, books, furniture, etc.Increase flow for
cleaning bare floor.
You can adjust the vacuum cleaner power using the power control on the housing.
To rewind the cord, press the rewind button and guide the cord with hand to
ensure that it does not whip causing damage.
To prevent motor overheating do not work continuously longer than 30 minutes
and obligatory stop the vacuum cleaner for no less than 15 min.
ADVANTAGES OF YOUR VACUUM CLEANER
Your vacuum cleaner features a five-level air filtration system:
A three-layer cloth dust collector.
Fine fiber filter installed between the dust collector compartment and the electric
motor
Fine fiber air outlet filter
Five layers of filtering materials deliver exceptional cleaning performance.