5.1 MyFavourite
With this option you can set and memo-
rise the programme and options that you
use more frequently.
It is not possible to memorise the options
Multitab and Delay.
You can only memorise 1 pro-
gramme at a time. A new setting
cancels the previous one.
How to memorise a programme
1.
Press the on/off button to activate the
appliance.
2.
Set the programme and the options
that you want to memorise.
3. Press and hold the MyFavourite but-
ton until the related indicator comes
on with fixed light.
How to set the MyFavourite
programme
1.
Press the MyFavourite button.
• The related indicator comes on.
• The display shows the number and
the duration of the programme.
• The option indicators come on.
5.2 TimeSaver
This option increases the water pressure,
the result is that the programme duration
decreases by approximately 50%.
To make sure that the washing results are
the same as with the normal programme
duration, the temperature of the water in-
creases. This increases the energy con-
sumption.
With a shorter drying phase also the dry-
ing results can decrease.
How to activate the TimeSaver option
1. Press the TimeSaver button.
• If the option is applicable to the pro-
gramme, the related indicator
comes on. In the display you can
see the update of the programme
duration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.3 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press the on/off button to activate the
appliance.
2. Press the Multitab button, the related
indicator comes on.
The option stays on until you deactivate it.
Press the Multitab button, the related in-
dicator goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab option.
2.
Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5.
Adjust the water softener to the water
hardness in your area.
6.
Adjust the released quantity of rinse
aid.
5.4 EnergySaver
This option decreases the temperature in
the last rinse phase and the duration of
the drying phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
How to activate the EnergySaver
option
1. Press the EnergySaver button.
• If the option is applicable to the pro-
gramme, the related indicator
comes on. In the display you can
see the update of the programme
duration.
• If the option is not applicable to the
programme, the related indicator
8
www.electrolux.com