Samsung 2032MW Инструкция по эксплуатации

Категория
ЖК-телевизоры
Тип
Инструкция по эксплуатации

Это руководство также подходит для

LCD телевизор/
монитор
Руководство пользователя
Перед началом эксплуатации устройства
внимательно прочитайте настоящее руководство и
сохраните его для будущего использования.
ЭКРАННЫЕ МЕНЮ
ДИСПЛЕЙ ПК
КАРТИНКА В КАРТИНКЕ (PIP)
ТЕЛЕТЕКСТ
Зарегистрируйте устройство по адресу: www.samsung.com/global/register
Запишите здесь название модели и серийный номер для будущих справок
.
Модель _______________ Серийный номер _______________
932MW
932MG
2032MW
2032MG
Все вопросы, касающиеся правильной эксплуатации данного монитора, изложены в
Руководстве Пользователя на CD, входящим в комплект поставки.
BN68-01477A-01Eng-0204�����(��).1 1 2008-02-04 ¿ÀÈÄ 12:57:48
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-01477A-X1Eng-0109indd.indd 1 2008-01-09 ¿ÀÀü 10:10:12
English - 1
CONNECTING AND PREPARING YOUR TV
List of Parts ................................................... 2
Folding the base ............................................ 2
Viewing the Control Panel ............................. 3
Viewing the Connection Panel ...................... 4
Viewing the Remote Control .......................... 6
Installing Batteries in the Remote Control ..... 7
Switching On and Off .................................... 7
Placing Your Television in Standby Mode...... 7
SETTING THE CHANNELS
Storing Channels Automatically .................... 8
Storing Channels Manually ........................... 9
Editing the Channels ................................... 10
Activating the Child Lock ............................. 10
Sorting the Stored Channels ........................11
Assigning Channels Names .........................11
Fine Tuning Channel Reception .................. 12
SETTING THE PICTURE
Changing the Picture Standard ................... 12
Adjusting the Custom Picture ...................... 13
Changing the Colour Tone........................... 13
Changing the Picture Size ........................... 14
Freezing the Current Picture ....................... 14
Viewing the Picture In Picture (PIP) ............ 15
Picture Features in PC or DVI mode ........... 16
SETTING THE SOUND
Changing the Sound Standard .................... 17
Customizing the Sound ............................... 17
Adjusting the Volume Automatically ............ 18
Listening to the Sound of the Sub Picture ... 18
Selecting the Sound mode .......................... 18
Connecting headphones ............................. 19
SETTING THE OTHERS
Choosing Your Language ............................ 19
Setting the Sleep Timer ............................... 19
Transparency Level ..................................... 20
Setting the Blue Screen Mode .................... 20
Reset ........................................................... 21
Setting the HDMI Black Level ..................... 21
Selecting the Source ................................... 22
Editing the Input Source Names ................. 22
Teletext Feature .......................................... 23
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ............................ 25
Display Modes ............................................. 25
RECOMMENDATIONS FOR USE
Troubleshooting: Before Contacting Service
Personnel .................................................... 26
Technical and Environmental Specications
.................................................................... 26
English
Contents
Symbol Press Note One-Touch
Button
English - 1
BN68-01477A-X1Eng-0109indd.indd 1 2008-01-09 ¿ÀÀü 8:34:23
English - 2
CONNECTING AND PREPARING YOUR TV
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord D-Sub Cable Stereo Cable
CD User’s Guide,
Monitor Driver
Cleaning Cloth
Owner’s Instructions
Monitor Quick Setup Guide
Warranty card(Not available in all location)
M/B
M/B
M/B
M/B
M/B
M/B
Folding the base
You can tilt the monitor upwards at an angle of 0° to 18°.
BN68-01477A-X1Eng-0109indd.indd 2 2008-01-09 ¿ÀÀü 8:34:24
English - 3
Viewing the Control Panel
1 SOURCE
Toggles between all the available input
sources (
PC, DVI, TV, Ext., AV, S-Video,
Component, HDMI
). In the on-screen menu,
use this button as you use the
ENTER
button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s
features.
3 + VOL -
Press to decrease or increase the volume.
In the on-screen menu, use the + VOL -
buttons as you use the
and
buttons on
the remote control.
4 + CH -
Press to change channels.
In the on-screen menu, use the + CH - buttons
as you use the
and
buttons on the
remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
5 Remote Control Sensor
Aim the remote control towards this spot on
the TV.
6 (Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns on when the power is on and
lights up in stand-by mode.
7 Speakers
The product colour and shape may vary depending on the model.
1
2
3
4
65
77
BN68-01477A-X1Eng-0109indd.indd 3 2008-01-09 ¿ÀÀü 8:34:25
English - 4
Viewing the Connection Panel
POWER
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 DVI/PC IN
PC: Connect the signal cable to the PC port on the back of your monitor.
DVI-D: Connect the DVI cable(optional) to the DVI-D port on the back of your monitor.
2 HDMI/PC/DVI-D AUDIO IN
Connect the HDMI/PC/DVI-D AUDIO IN terminal at the back of your monitor to your computer’s
sound card.
3 COMPONENT IN
Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear
of your set and the other ends to corresponding component video out connectors on the DTV or
DVD.
If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top
Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y")
on your set.
The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
4
ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 S-VIDEO, VIDEO, R-AUDIO-L
- Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such
as VCR, DVD or Camcorder.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other
ends to corresponding audio out connectors on the A/V device.
6 (Headphones)
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
1 2 3 4
5
6
79 8
BN68-01477A-X1Eng-0109indd.indd 4 2008-01-09 ¿ÀÀü 8:34:25
English - 5
7
EXT(RGB)
- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top
Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
8 Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a
public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
9 HDMI IN
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD
players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, connect the audio cables to the "HDMI/PC/DVI-D
AUDIO IN" jacks on the back of the TV.
What is HDMI?
“High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio
BN68-01477A-X1Eng-0109indd.indd 5 2008-01-09 ¿ÀÀü 8:34:25
English - 6
The performance of the remote control may be affected by
bright light.
This is a special remote control for the visually impaired and
has Braille points on the Power, Channel and Volume buttons.
1 Television Standby button
2 Number buttons for direct
channel access
3 One/Two-digit channel
selection
4 Temporary sound switch-off
5 : Volume increase
: Volume decrease
6 Displays the main on-screen
menu
7 Control the cursor in the menu
8 Sound mode selection
9 Picture effect selection
0 Selects the sub picture (PIP)
source.
@ Picture-In-Picture On / Off
# Adjusts the screen display
automatically.(in PC mode)
$ Use to see information on the
current broadcast
% Available source selection
^ Previous channel
& P : Next channel
P : Previous channel
* Exit the on-screen menu
( Picture freeze
) Picture size selection
a Automatic Power-off
b Sound effect selection
Teletext Functions
3 Teletext hold
6 Teletext index
0 Teletext size selection
! Alternately select Teletext,
Double, or Mix.
$ Teletext reveal
% Teletext mode selection
(LIST/FLOF)
& P : Teletext next page
P : Teletext previous page
a Teletext store
b Teletext sub page
8,9,(,) Fastext topic selection
Viewing the Remote Control
M/B
1
2
3
5
6
7
9
0
8
$
%
^
&
*
)
(
a
b!
@
#
4
BN68-01477A-X1Eng-0109indd.indd 6 2008-01-09 ¿ÀÀü 8:34:27
English - 7
1. Slide the cover out completely.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside
the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
The mains lead is attached to the rear of your set.
1.
Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2.
Press the POWER button on the front of the set.
You also can press the POWER button on the remote control to turn the TV on. on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
+ CH - button on the lower-right panel.
When you switch the set on for the very first time, you will be asked to choose language in which
the menus are to be displayed.
4. To switch your set off, press the POWER button again.
Switching On and Off
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER
, numeric buttons (0~9) or channel
up/down (
/ ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example). It is best to unplug the set from the mains and aerial
.
Placing Your Television in Standby Mode
Installing Batteries in the Remote Control
BN68-01477A-X1Eng-0109indd.indd 7 2008-01-09 ¿ÀÀü 8:34:27
English - 8
SETTING THE CHANNELS
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you do
not wish to watch.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Channel”, then press the
ENTER button.
2. Press the ENTER button to select “Country”.
3. Select the appropriate country by pressing the ▲ or button.
Press the ENTER button to confirm your choice.
4. Press the ▲ or button to select “Auto Store”, then press the
ENTER button.
5. Press the ENTER button to select “Start”.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process and return to the
“Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
(Refer to page 11)
Storing Channels Automatically
40MHz P1 C
--
VHF-L
0 %
40MHz P1 C
--
VHF-L
0 %
Start
Enter Return
Auto Store
Be l gi u m
Fr a nc e
Ge r ma n y
It a ly
Ne t he r la n ds
Sp a in
Sw e de n
Sw i tz e rl a nd
Move Enter Return
Country
BN68-01477A-X1Eng-0109indd.indd 8 2008-01-09 ¿ÀÀü 8:34:28
English - 9
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Channel”, then press the ENTER button.
2. Press the ▲ or button to select “Manual Store”, then press the ENTER button.
3. Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number
by pressing the or ▼ button and then press the ENTER button.
5. Press the ▲ or button to select “Colour System”, then press the ENTER button.
6. Select the colour standard required by pressing the or ▼ button, then press the ENTER button.
7. Press the ▲ or button to select “Sound System”, then press the ENTER button.
8. Select the sound standard required by pressing the or ▼ button,
then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
▲ or button to select “Channel”. Press the ENTER button. Select C (Air channel) or
S (Cable channel) by pressing the or ▼ button. Press the ► button to select channel.
Select the required number by pressing the or ▼ button and then press the ENTER button.
Channel mode: P (Programme mode)
C (Air channel mode)
S (Cable channel mode)
You can also set a channel number by pressing the number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or button to select “Search”.
Press the ENTER button. Search by pressing the ▲ or button and then
press the ENTER button.
11. Press the ▲ or button to select “Store”, then press the ENTER button.
Press the or ▼ button to select “OK”, then press the ENTER button.
12. Repeat steps 3 to 11 for each channel to be stored.
♦ Programme: Selects a program number for the channel.
♦ Colour System: Sets the colour supporting system.
♦ Sound System: Sets the sound supporting system.
♦ Channel: Selects a channel.
♦ Search: Scans for the frequency value for the channel.
♦ Store: Saves your settings.
Storing Channels Manually
Pr o gr a mm e : P2
Co l ou r S y st e m : AU T O
So u nd Sy s te m : B G
Ch a nn e l : C- -
Se a rc h : 40 MH z
St o re : ?
Move Enter Return
Manual Store
BN68-01477A-X1Eng-0109indd.indd 9 2008-01-09 ¿ÀÀü 8:34:29
English - 10
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
1. Press the MENU button to display the menu.
Press the or ▼ button to select "Channel", then press the
ENTER button.
2. Press the or ▼ button to select "Channel Manager", then press the
ENTER button.
3. Press the ENTER button again, to select "Channel List".
4. Press the ►button to select " " line.
5. Press the ▲ or button to select the channels you want, then press
the ENTER button.
The channels marked "c" will be added.
6. Repeat steps 5 for each channel to be deleted or added.
7. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote
control.
Editing the Channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out video
and audio. Child Lock cannot be released using the buttons on the
side. Only the remote control can release the Child Lock setting, so
keep the remote control away from children.
1. Press the MENU button to display the menu.
Press the or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or button to select "Channel Manager", then press the
ENTER button.
3. Press the ▲ or button to select "Child Lock", then press the ENTER
button.
4. Press the ▲ or button to select "On". Press the ENTER button.
5. Press the ▲ or button to select "Channel List", then press the
ENTER button.
6. Press the ►button to select " " line.
" " is active when "Child Lock" is selected to
7. Press the ▲ or button to select the channels you want, then press the ENTER button.
The channels marked " " will be locked.
8. Repeat steps 7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or
inactive
Activating the Child Lock
P1 C--
Channel List
Move
Page
Add Lock
1 / 10
Prog.
P 1 C--
P 2 C--
P 3 C--
P 4 C--
P 5 C--
P 6 C--
P 7 C--
P 8 C--
P 9 C--
P 10 C--
Enter
Return
Ch a nn e l L is t
Ch i ld Lo c k : On
Move Enter Return
Channel Manager
P1 C--
Channel List
Move
Page
Add Lock
1 / 10
Prog.
P 1 C--
P 2 C--
P 3 C--
P 4 C--
P 5 C--
P 6 C--
P 7 C--
P 8 C--
P 9 C--
P 10 C--
Enter
Return
BN68-01477A-X1Eng-0109indd.indd 10 2008-01-09 ¿ÀÀü 8:34:30
English - 11
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Channel”, then press the
ENTER button.
2. Press the ▲ or button to select “Sort”, then press the ENTER button.
3. Press the ENTER button to select “From”. Press the ▲ or ▼ button until the channel number that
you wish to change is displayed.
Press the ENTER button.
4. Press the or ▼ button to select “To”, then press the ENTER button.
Press the or ▼ button until the new number by which you wish to identify the channel is displayed.
Press the ENTER button.
5. Press the or ▼ button to select “Store”, then press the ENTER button.
Press the or ▼ button to select “OK”, then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen number.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
Sorting the Stored Channels
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the or ▼ button
to select “Channel”, then press the ENTER button.
2. Press the ▲ or button to select “Name”, then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new name by pressing the ▲ or button.
Press the ENTER button.
4.
To... Then...
Select a letter, number or symbol
Press the or button
Move on the next letter
Press the button
Move back the previous letter
Press the button
Confirm the name Press the ENTER button
The characters available are : Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters (space, /, *, -, +)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Assigning Channels Names
Fr o m : P2
To : P- -
St o re : ?
Move Enter Return
Sort
1 C- - --- - -
2 C- - --- - -
3 C- - --- - -
4 C- - --- - -
5 C- - --- - -
Move Enter Return
Name
Pro g. Ch . Na me
BN68-01477A-X1Eng-0109indd.indd 11 2008-01-09 ¿ÀÀü 8:34:31
English - 12
Use fine tuning to manually adjust a particular channel for optimal
reception.
1. Use the number buttons to directly select the channel that you want to
fine tune.
2. Press the MENU button to display the menu.
Press the or ▼ button to select “Channel”, then press the
ENTER button.
3. Press the ▲ or button to select “Fine Tune”, then press the ENTER button.
4. Press the ◄ or button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of
the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and then press the ENTER
button.
Fine Tuning Channel Reception
SETTING THE PICTURE
You can select the type of picture which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the or ▼ button
to select “Picture”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal
environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture” on page 13)
In the PC mode, “Entertain”, “Internet”, “Text”, “Custom” appears.(refer to page 16)
Changing the Picture Standard
You can also press the
P.MODE button on the
remote control to select one
of the picture settings.
Dy n am i c
St a nd a rd
Mo v ie
Cu s to m
Move Enter Return
Mode
P2
Adjust Save Return
Move
Reset
Fine Tune
00
BN68-01477A-X1Eng-0109indd.indd 12 2008-01-09 ¿ÀÀü 8:34:32
English - 13
Your set has several settings which allow you to control picture
quality.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or button to select “Custom”, then press the
ENTER button.
3. Press the or ▼ button to select a particular item.
Press the ENTER button.
4. Press the ◄ or button to decrease or increase the value of a particular item.
Press the ENTER button.
5. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects
and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
If you make any changes to these settings, the picture mode is automatically switched to
“Custom”.
In the PC mode, only “Contrast” and “Brightness” can be adjusted.(refer to page 16)
Adjusting the Custom Picture
You can select the most comfortable colour tone to your eyes.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or button to select “Colour Tone”, then press the
ENTER button.
3. Press the or ▼ button to select the desired colour tone setting.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Cool 2: Makes the colour temperature bluer than “Cool 1” menu.
♦ Cool 1: Makes whites bluish.
♦ Normal: Keeps whites white.
♦ Warm1: Makes whites reddish.
♦ Warm2: Makes the colour temperature redder than “Warm1”
menu.
In the PC mode, “Cool” ,“Normal”, “Warm”, “Custom” appears. (refer to page 16)
Changing the Colour Tone
Co n tr a st 100
Br i gh t ne s s 4 5
Sh a rp n es s 7 5
Co l ou r 5 5
Move Enter Return
Custom
Co o l 2
Co o l 1
No r ma l
Wa r m 1
Wa r m 2
Move Enter Return
Colour Tone
BN68-01477A-X1Eng-0109indd.indd 13 2008-01-09 ¿ÀÀü 8:34:33
English - 14
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or button to select “Size”, then press the ENTER
button.
3. Select the required option by pressing the ▲ or button.
Press the ENTER button.
4. Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
Wide: Adjusts the picture size to 16:10 appropriate for DVDs or
wide broadcasting.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Zoom1: Magnifies the size of the picture on the screen.
Zoom2: Magnifies the size of the picture more than “Zoom1”.
4:3: This is the default setting for a video movie or normal
broadcasting.
Each adjusted setting will be stored separately according to its input mode.
In PC Mode, only “Wide” and “4:3” mode can be adjusted.
"Auto Wide" function is available only in “TV”, “Ext.”, “AV” and “S-Video” mode.
Zoom : Select by pressing the ◄ or ►button.
Use the or ▼button to move the picture up and down.
After selecting , use the or ▼ button to magnify or reduce the picture size in the vertical
direction.
Changing the Picture Size
Press the STILL button to freeze a moving picture into a still one. Press
again to cancel.
This function doesn't work when the input source is DVI or PC.
Freezing the Current Picture
O
You can select these
options by simply
pressing the P.SIZE
button on the remote
control.
Au t o W i de
Wid e
16 : 9
Zo o m1
Zo o m2
4: 3
Move Enter Return
Size
BN68-01477A-X1Eng-0109indd.indd 14 2008-01-09 ¿ÀÀü 8:34:34
English - 15
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the picture of
set programme or video input from any connected equipment while
watching the main picture.
1. Press the MENU button to display the menu.
Press the or ▼ button to select "Input", then press the
ENTER button.
2. Press the ▲ or button to select "PIP", then press the
ENTER button.
3. Select the required option by pressing the ▲ or button, then press the ENTER button.
4. When you are satisfied with your setting, press the ENTER button.
5. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
PIP: On/Off
You can activate or deactivate the PIP function.
Main picture Sub picture
PC TV / AV / S-Video
DVI TV / AV / S-Video
O Press the PIP button on the remote control repeatedly to activate
or deactivate the "PIP".
Source: TV/Ext.1/Ext.2/AV
You can select a source of the sub-picture.
O You can select these options simply by pressing the SOURCE
button on the remote control.
Size: / /
You can select a size of the sub-picture.
Position: / / /
You can select a position of the sub-picture.
If "Size" set to " " or " ", "Position" will not be activated.
Viewing the Picture In Picture (PIP)
PI P : O n
So u rc e : TV
Si z e :
Po s it i on :
Move Enter Return
PIP
BN68-01477A-X1Eng-0109indd.indd 15 2008-01-09 ¿ÀÀü 8:34:34
English - 16
Custom: Contrast / Brightness
Your set has several settings which allow you to control picture quality.
If you make any changes to these settings, the "MagicBright" is automatically switched to
“Custom”.
Colour Tone: Cool / Normal / Warm / Custom
You can select the most comfortable colour tone to your eyes.
"Custom" is only available in PC mode..
Colour Control: Red / Green / Blue
Adjust the individual R, G, B Colour Controls.
This function is only available in PC mode.
If you make any changes to these settings, "Colour Tone" is automatically switched to “Custom”.
Image Lock: Coarse / Fine / Sharpness / Position
- Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency as
best as possible (coarse) and Fine-tune again. After the noise has been reduced,
readjust the picture so that it is aligned on the center of screen.
- Sharpness: Adjusts the picture sharpness.
- Position: Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the or ▼ button to adjusting the Vertical-Position.
Press the or ►button to adjust the Horizontal-Position.
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The
values of fine, coarse and position are adjusted automatically.
Size: Wide / 4:3
You can select the picture size which best corresponds to your viewing requirements.
PIP Picture: Contrast / Brightness / Sharpness / Colour
You can adjust the contrast, brightness, sharpness and colour of the PIP window on the screen.
You can select this option when the “PIP” is set to “On”.
These functions are available in PC or DVI mode.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Picture”, then press the
ENTER button.
2. Select the required option by pressing the ▲ or button, then
press the ENTER button.
Available options: MagicBright, Custom, Colour Tone, Colour
Control, Image Lock, Auto Adjustment, Size, PIP
Picture(in PIP mode)
Picture Features in PC or DVI mode
Mag icB rig ht : Cus tom
Cus tom
Col our To ne : Cu sto m
Col our Co ntr ol
Ima ge Loc k
Aut o Adj ust men t
Siz e : Wi de
PIP Pic tur e
Move Enter Return
Picture
MagicBright: Entertain / Internet / Text / Custom
MagicBright™ is a new feature providing the optimum viewing
environment depending on the contents of the image you are
watching.
- Entertain: High brightness. (For watching motion pictures such as
a DVD or Video CD.)
- Internet: Medium brightness. (For working with a mixture of
images such as text and graphics.)
- Text: Normal brightness. (For documentations or works involving
heavy text.)
- Custom: Select to view your favorite display settings.
(in PC mode)
O You can also press the M/B button on the remote control to
select one of the picture settings.
BN68-01477A-X1Eng-0109indd.indd 16 2008-01-09 ¿ÀÀü 8:34:35
English - 17
SETTING THE SOUND
You can select the type of the special sound effect to be used when
watching a given broadcast.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the ▲ or button to select the desired sound effect.
Press the ENTER button.
4. Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Music: Selects to emphasize music over voices.
Movie: Selects to provide live and full sound for movies like the
movie theater.
Speech: Selects to emphasize voice over other sounds.
Custom: Selects to recall your personalized settings (see
"Customizing the Sound").
Changing the Sound Standard
The sound settings can be adjusted to suit your personal preferences.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ▲ or button to select “Custom”, then press the
ENTER button.
3. Press the ▲ or button to select a particular item.
Press the ENTER button.
4. Press the ◄ or button to decrease or increase the value of a particular item.
Press the ENTER button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the sound mode is automatically switched to
“Custom”.
Adjusting the Sound Settings
You can also select these
options by simply pressing
the S.MODE button on the
remote control.
St a nd a rd
Mu s ic
Mo v ie
Sp e ec h
Cu s to m
Move Enter Return
Mode
Ba s s 5 0
Tr eb l e 5 0
Ba l an c e
L 5 0
R 5 0
Move Enter Return
Custom
BN68-01477A-X1Eng-0109indd.indd 17 2008-01-09 ¿ÀÀü 8:34:36
English - 18
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ▲ or button to select “Auto Volume”, then press the ENTER button.
3. Press the ▲ or button to select “On” or “Off”. Press the
ENTER button.
4. Press the EXIT button to exit.
Adjusting the Volume Automatically
During the PIP features activation, you can listen to the sound of the
sub picture.
1. Press the MENU button to display the menu.
Press the or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ▲ or button to select “Sound Select”, then press the
ENTER button.
3. Press the ▲ or button to select “Main” or “Sub”.
Press the ENTER button.
4. Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the “PIP” is set to “On”.
Listening to the Sound of the Sub Picture
Selecting the Sound mode
You can set the sound mode by pressing the “DUAL I-II” button. When
you press it, the current sound mode is displayed on the screen.
Audio Type Dual
1/2
Default
A2
Stereo
Mono Mono
Automatic
change
Stereo Stereo
Mono
Dual Dual
1
Dual
2
Dual 1
NICAM
Stereo
Mono Mono
Automatic
change
Stereo Mono
Stereo
Dual
Mono
Dual
1
Dual
2
Dual 1
You can also set these
options simply by pressing
the DUAL I-II button on
remote control.
Of f
On
Move Enter Return
Auto Volume
Ma i n
Su b
Move Enter Return
Sound Select
BN68-01477A-X1Eng-0109indd.indd 18 2008-01-09 ¿ÀÀü 8:34:37
1 / 1

Samsung 2032MW Инструкция по эксплуатации

Категория
ЖК-телевизоры
Тип
Инструкция по эксплуатации
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ