Sony KV-AZ212 Руководство пользователя

Категория
Телевизоры CRT
Тип
Руководство пользователя

Это руководство также подходит для

Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Tr initron Color TV
© 2006 Sony Corporation
KV-AZ212
2-687-422-E2 (1)
Operating Instructions
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
GB
M91
01GB01COV-SOEMRus.p65 5/15/07, 2:05 PM1
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
110-240 V AC, 50/60 Hz
Indicated on the rear of the TV
B/G, I, D/K, M
PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43
NICAM Stereo/Bilingual B/G, I, D/K;
A2 Stereo/ Bilingual B/G
English, Russian
VHF : E2 to E12 /UHF : E21 to E69 /
CATV : S01 to S03, S1 to S41
UHF : B21 to B68 /CATV : S01 to S03, S1 to S41
VHF : C1 to C12, R1 to R12 /
UHF : C13 to C57, R21 to R60 /
CATV : S01 to S03, S1 to S41, Z1 to Z39
VHF : A2 to A13 /UHF : A14 to A79 /
CATV : A-8 to A-2, A to W+4, W+6 to W+84
75-ohm external terminal
10 W + 10 W
Input: 2 Output: 1 Phono jacks; 1 Vp-p, 75 ohms
Input: 3 Output: 1 Phono jacks; 500 mVrms
Input: 1 Y: 1 Vp-p, 75 ohms,
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
Input: 1 Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C
B: 0.7 Vp-p, 75 ohms
C
R: 0.7 Vp-p, 75 ohms
Output: 1 Stereo minijack
87.5 - 108.0 MHz
10.7 MHz
21 in.
54
Measured diagonally
51
Measured diagonally
589 × 472 × 515
27
A Specifications
NoteKV-AZ212M91
Design and specifications are subject to change without notice.
Made in Malaysia.
Sony Corporation
1-7-1 Konan, Minato-ku,
Tokyo 108-0075, Japan.
Power requirements
Power consumption (W)
Television system
Color system
Stereo/Bilingual system
Teletext language
Channel coverage
B/G
I
D/K
M
8 (Antenna)
Audio output (Speaker)
Number of terminal
(Video)
(Audio)
(S Video)
(Component
Video)
i (Headphone)
FM Radio
Tuning Range
Intermediate
Frequency
Picture tube
Tube size (cm)
Screen size (cm)
Dimensions (w/h/d, mm)
Mass (kg)
http://www.sony.net/
01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM2
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Clean the TV with a dry and soft
cloth. Do not use benzine, thinner,
or any other chemicals to clean the
TV. Do not attach anything (e.g.,
adhesive tape, cellophane tape,
glue) on the painted cabinet of the
TV. Do not scratch the picture
tube.
B WARNING
• Dangerously high voltages are present inside the TV.
• TV operating voltage: 110 – 240 V AC.
Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
•To avoid battery leakage and damage to the remote, remove the batteries from the
remote if you are not going to use it for several days. If any liquid leaks from the
batteries and touches your skin, immediately wash it away with water.
Install the TV on a stable TV stand
and floor which can support the
TV set weight. Ensure that the TV
stand surface is flat and its area is
larger than the bottom area of the
TV.
Do not plug in too many
appliances to the same power
socket. Do not damage the power
cord.
For children’s safety, do not leave
children alone with the TV. Do not
allow children to climb onto it.
For your own safety, do not touch
any part of the TV, the power cord
and the antenna cable during
lightning storms.
Do not place any objects on the TV.
The apparatus shall not be
exposed to dripping or splashing
and that no objects filled with
liquids, such as vases, shall be
placed on the apparatus.
Do not operate the TV if any liquid
or solid object falls into it. Have it
checked immediately by qualified
personnel only.
Do not block the ventilation
openings of the TV. Do not install
the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not open the cabinet and the
rear cover of the TV as high
voltages and other hazards are
present inside the TV. Refer
servicing and disposal of the TV
to qualified personnel.
Pull the power cord out by the
plug. Do not pull the power cord
itself. Even if your TV is turned
off, it is still connected to the AC
power source (mains) as long as
the power cord is plugged in.
Unplug the TV before moving it
or if you are not going to use it for
several days.
To prevent fire or shock hazard, do
not expose the TV to rain or
moisture.
Your TV is recommended for
home use only. Do not use the TV
in any vehicle or where it may be
subject to excessive dust, heat,
moisture or vibrations.
01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM3
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
b
b
Insert the batteries (supplied) into the remote.
Note
Do not use old or different types of batteries together.
Connect the antenna cable (not supplied) to 8
(antenna input) at the rear of the TV.
Tips
•Your TV can receive both TV and FM radio signals from the
appropriate connections through the 8 (antenna input)
terminal (see E).
•You can also connect your TV to other optional components
(see E).
Plug in the power cord, then press ! on the TV to turn
it on.
Note
The 1 (standby) indicator flashes green for a few seconds
when turning on the TV. This does not indicate a malfunction.
Set up the TV by following the instructions of the
Начальная настройкa” (“Initial Setup”) menu
(see D).
C Getting Started
Step 1
Step 2
Step 3
Step 4
01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM4
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Sorting mode
PROG
SkipLabel
Off01
Exit
Select
Confirm
Program Sorting/Edit
01
02
03
04
Off
Off
Off
Off
Sorting:
Edit:
PROG
SkipLabel
Exit
Select
Confirm
D
Setting up your TV (“Initial Setup”)
When you turn on your TV for the first time, the “Начальная настройкa
(“Initial Setup”) menu will appear. You may change the menu language, preset
the TV channels automatically, sort or edit the channels and adjust the picture
position using the buttons on the remote control or TV top control panel.
1
Press V or v to select the desired menu
language, then press .
The selected menu language appears.
2
Press V or v to select “Yes”, then press to
preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the “Program Sorting/Edit”
menu appears automatically on the screen.
To skip automatic channel presetting, select
“No”, then press
.
If the message “No channel found. Please
connect cable/antenna” appears, check your
TV connections, then press
.
3
The “Program Sorting/Edit” menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the current
condition, press WEGA GATE to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will appear
on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new program
number position for your selected
channel, then press B.
End
Select
Confirm
End
Select
Confirm
Program:
TV System: Auto
01
VHF Low
End
01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM5
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
d) If you wish to edit the channels, press
to change to edit mode.
Press b until the mode that you wish to edit
is highlighted: Label, Skip,
(block symbol).
Then press
.
1) To label, press V or v to select the
alphanumeric characters for the label.
Then press
.
2) To skip the program number, press V or v to
select “On”. Then press
.
You can skip this program number when
using PROG +/–.
3) To block unwanted program number,
press V or v to select
. Then press .
e) Repeat step b) to d) if you wish to change other
channels.
Press WEGA GATE to go to the next menu.
4
Press B or b to adjust the bars on the top
and bottom of the menu if they are
slanted, then press
.
If no adjustment is necessary, then press
.
5
To prevent this “Initial Setup” menu from
appearing again when you turn on the TV
by pressing !, press V or v to select “No”,
then press
.
To allow this menu to appear again, select
“Yes”, then press
.
Tip
•You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.
End
Select
Confirm
Picture Rotation
Select
Confirm
Display this menu next time?
No
Yes
Initial Setup
Exit
Select
Confirm
Program Sorting/Edit
Edit mode
Label Skip
PROG
01
04
03
02
Off
Off
Off
Off
Setting up your TV (“Initial Setup”) (continued)
Exit
Select
Confirm
Program Sorting/Edit
Edit mode
Label Skip
PROG
01
04
03
02
Off
Off
Off
Off
Exit
Select
Confirm
Program Sorting/Edit
Edit mode
Label Skip
PROG
01
04
03
02
Off
Off
Off
Off
01GB02WAR-SOEMRus.p65 5/15/07, 2:05 PM6
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
E Connecting optional components
Connecting to the video input terminal ( t )
Notes
If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the
program number 0 on the TV (see M).
When both (S video) and (video) for t 1 are connected at the same time,
(S video) is automatically selected. To view (video), disconnect the S video cable.
TV front panel
Antenna cable
(not supplied)
DVD player
TV rear panel
Audio/
Video cable
(not supplied)
Audio/Video cable
(not supplied)
Camcorder
S Video cable
(not supplied)
Antenna cable
(not supplied)
TV, CATV, Satellite
or
When there is no
FM signal
Antenna
selector
FM signal
TV signal
VCR
L
R
(MONO)
2
(
R
L
Y
C
B
C
R
MONO)
(
L
R
1
MONO)
R
L
R
L
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM7
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
DVD player
TV rear panel
Component video
cable
(not supplied)
Audio cable
(not supplied)
L
R
R
1
L
Y
C
B
C
R
(MONO)
(MONO)
Y
R
L
C
R
C
B
Connecting to the component video input terminal ( )
Notes
If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to (component video input) on your TV. Your TV can receive
either 525i/60Hz or 625i/50Hz interlace signals.
The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/
PR, Y/Cb/Cr or Y/B-Y/R-Y.
If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
TV rear panel
Audio system
(
R
L
Y
C
B
C
R
MONO)
(
L
R
1
MONO)
R
L
VCR
Audio/Video
cable
(not supplied)
Connecting to the monitor output terminal ( T )
Connecting optional components (continued)
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM8
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
F Troubleshooting
If you find any problem while viewing your TV, you can either use the “Factory
Settings” function or check the Troubleshooting guide below. If the problem
persists, contact your Sony dealer.
“Factory Settings” function
Press the WEGA GATE button. Choose “Settings” and go to “Setup” ( )
menu. From “Setup” menu, select “Factory Settings”. Then select “Yes” and
press
. Your TV will go blank for a few seconds, then the “Initial Setup”
menu will appear. Your TV will be set to factory settings, but certain problems
may be solved.
Snowy picture,
noisy sound
Distorted picture,
noisy sound
Good picture,
noisy sound
No picture,
no sound
Good picture,
no sound
Dotted lines or
stripes
Double images
or “ghosts”
No color
Symptom Solutions
Check the antenna cable and connection on the TV, VCR and at the wall
(see E).
Check the antenna setup. Contact a Sony dealer for advice.
Display the “Channel Setup” menu and select “Manual Program” to preset
the channel again (see M).
Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”
from “Manual Program” (see M).
•Try using an external booster.
•Turn off or disconnect the external booster if it is in use.
Display the “Channel Setup” menu and set the “Signal Booster” to “Off”
from “Manual Program” (see M).
Display the “Channel Setup” menu and select the appropriate
“TV System” from “Manual Program” (see M).
Check the power cord, antenna and VCR connections (see E).
•Press ?/1 (power) to turn on the TV (see G).
•Press ! (main power) on the TV to turn off the TV for about five seconds,
then turn it on again (see H).
•Press 2 + to increase the volume level (see G).
•Press to cancel the muting (see G).
• Do not use a hair dryer or other equipment near the TV.
Check the antenna setup. Contact a Sony dealer for advice.
Use a highly directional antenna.
Use the fine tuning (“Fine”) function (see M).
Check the antenna setup. Contact a Sony dealer for advice.
•Turn off or disconnect the external booster if it is in use.
Display the “Picture” menu and select “Custom” from “Picture Mode”, then
adjust the “Color” level from “Picture Adjustment” (see
K
).
Display the “Setup” menu and check the “Color System” setting
(usually set this to “Auto”) (see N).
Check the antenna setup. Contact a Sony dealer for advice.
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM9
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Picture slant
Abnormal color
patches
Teletext display
is incomplete
(snowy picture
or double images).
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches on
and off or is
distorted.
TV cannot receive
FM radio station.
The 1 (standby)
indicator on your
TV flashes red
several times after
every three
seconds.
The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
TV cabinet creaks.
A small “boom”
sound is heard
when the TV is
turned on.
Keep external speakers or other electrical equipment away from the TV.
Display the “Setup” menu and adjust “Picture Rotation” so that the
picture position is optimal (see
N
).
Keep external speakers or other equipment away from the TV. Do not
move the TV while the TV is turned on. Press ! (main power) on the TV
to turn off the TV for about 15 minutes, then turn it on again to
demagnetize the TV.
Check the antenna cable and connection on the TV, VCR and at the wall
(see E).
Check the antenna setup. Contact a Sony dealer for advice.
Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”
from “Manual Program” (see M).
•Try using an external booster.
Use the fine tuning (“Fine”) function (see M).
Check the antenna cable and connection on the TV, VCR and at the wall
(see E).
Check the antenna setup. Contact a Sony dealer for advice.
Connect a separate FM antenna and the TV channel source through an
antenna selector (switch) to your TV (see E).
Count the number of times the 1 (standby) indicator flashes.
Press ! (main power) to turn off your TV. Contact your nearest Sony
service center.
The “Signal Booster” is functioning to detect a weak signal. This does not
indicate a malfunction.
Changes in room temperature sometimes make the TV cabinet expand or
contract, causing a noise. This does not indicate a malfunction.
The TV’s demagnetizing function is working. This does not indicate a
malfunction.
Symptom Solutions
Troubleshooting (continued)
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM10
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
G Using the remote control and basic
functions
TV
1
2
3
4
6
7
8
9
0
5
PROG
A/B
1
2
3
7
4
5
qj
qa
qd
qf
qh
WEGA
GATE
6
8
9
0
w;
ql
qg
qs
RETURN
qk
Button Description See
1 ?/1 Turn off temporarily or turn on
the TV.
2 a Display the TV program.
3 Jump to last program number
that has been watched for at
least five seconds.
4 PROG +/–
Select program number. To select
quickly, press and hold until the
desired program number appears.
5 2 +/– Adjust volume.
8 Change the picture size:
“On” (16:9 wide-mode), “Off”.
9 Select surround mode options: L
“TruSurround”, “WOW”,
“Simulated”, “Off”.
0 Display on-screen information.
qa Mute the sound.
qd t Select TV or video input. E
qf 0 – 9 Input numbers. For program
numbers 10 and above, enter the
second digit within two seconds.
ql Select sound mode options L
with a 5-Band Graphic
Equalizer display:
“Dynamic”, “Standard”,
“Custom”*.
* When the “Custom” mode is
selected, you can receive the
last adjusted sound settings
from the “Sound Adjustment”
option in the menu.
w;
Select picture mode options: K
“Vivid”, “Standard”, “Custom”*.
*
When the “Custom” mode is
selected, you can receive the
last adjusted picture settings
from the “Picture Adjustment”
option in the menu.
Dynamic
100 300 1k 3k 8k
100 300 1k 3k 8k
Custom
100 300 1k 3k 8k
Standard
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM11
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Button Description See
WEGA GATE menu operations
6 Confirm selected items. I
7 WEGA GATE Display or cancel WEGA GATE menu.
qj V, v, B, b Select and adjust items.
qk RETURN Return to the previous level.
Timer operations
qg Set TV to turn on automatically according to the
desired period of time (max. of 12 hours).
The indicator on TV lights up amber once you set
the wake up timer.
If no buttons or controls are pressed for more than one
hour after the TV is turned on using the wake up timer,
the TV automatically goes into standby mode.
qh Set TV to turn off automatically according to the
desired period of time (max. of one hour and 30 min.).
Teletext operations (green label)
, , , , All buttons are used for Teletext operations. O
, , , ,
(red, green,
yellow, blue)
PIP operations
, , V, v, B, b Not function for your TV.
Stereo/bilingual operations
qs A/B Select stereo/bilingual mode. P
(Wake Up Timer)
(Sleep Timer)
WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW
and TruSurround technologies are incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866.
“BBE” and BBE symbol are trademarks of BBE Sound, Inc.
Using the remote control and basic functions (continued)
01GB03INS-SOEMRus.p65 5/15/07, 2:04 PM12
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
WEGA GATE
PROG
FM
0
9
8
6
7
L
R
2
(MONO)
4
(
R
L
Y
C
B
C
R
MONO)
qa
(
L
R
1
MONO)
13
L
R
2
5
(MONO)
qf qsqd
2
TV front panel
TV rear panel
H TV top control, front and rear
panels
TV top control panel
Button/Terminal Function See
1 ! Turn off or turn on the TV. C
2 Remote control sensor. -
3 Wake Up indicator. G
3 1 Standby indicator. C
4 i Headphone jack. -
5 t2Video input terminal 2. E
6 PROG +/– Select program number. -
7 2 +/– Adjust volume. -
8 t Select TV or video input. E
WEGA GATE menu operations
6,7 V,v,B,b Select and adjust items. I
8
Confirm selected items. I
9 WEGA GATE Display or cancel WEGA GATE menu. I
0 FM Listen to FM radio. Q
qa 8 Antenna input terminal. E
qs T Monitor output terminal. E
qd Component video input terminal. E
qf t1Video input terminal 1. E
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM13
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
I Introducing the WEGA GATE
navigator
WEGA GATE is a gateway that allows you access to preset TV channels,
connected external inputs, FM Radio mode and “Settings” menu.
watch the preset TV
channels (see D)
select the inputs for the
connected equipment
(see E)
change the settings
of your TV
(see J)
How to use WEGA GATE
(1) Press WEGA GATE to display or cancel
the WEGA GATE menu.
Confirm
Select
WEGA GATE
FM Radio
External Inputs
TV
Settings
(3) Press V or v to select the desired item.
(4) Press RETURN to move to the previous
level.
(2) Press (or b) to confirm your selection
or go to the next level.
“TV”
“External
Inputs”
“Settings”
Confirm
Select
WEGA GATE
External Inputs
TV
Settings
FM Radio
01
02
03
04
05
TV
Confirm
Select
End
01
02
03
04
05
TV
Confirm
Select
End
Tip
The WEGA GATE, and V,v,B,b buttons on the top control panel can also be used for the
operations above.
Confirm
Select
WEGA GATE
Settings
External Inputs
FM Radio
TV
01
02
03
04
05
TV
Confirm
Select
End
Preset 1:
---.--
Please setup FM Radio
FM Radio
Select Preset 1-9
Search
Exit
External Inputs
Confirm
Select
End
Video 1
1
2
DVD
Video 2
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
VM: High
Intelligent Picture: On
Signal Level Indicator: On
Select
Fine
“FM Radio”
listen to the FM Radio
(see Q)
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM14
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
J “Settings” Adjustment
You are able to change the settings of your TV from “Settings” in WEGA GATE
menu.
Press WEGA GATE button to display WEGA GATE menu. Press V or v to select
“Settings” and press
.
The following is an overview of the items that can be adjusted.
Confirm
End
Picture
Color Temperature: Cool
Picture Adjustment
Picture Mode: Vivid
VM: High
Intelligent Picture: On
Signal Level Indicator: On
Select
“Picture” (see K)
“Picture Mode”: “Vivid” “Standard” “Custom”
“Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,
“Sharpness”, “Reset”
“Color Temperature”: “Cool” “Neutral” “Warm”
“VM”: “High” “Low” “Off”
“Intelligent Picture”: “On” “Off”
“Signal Level Indicator”: “On” “Off”
Confirm
End
Sound
Sound Adjustment
Sound Mode: Dynamic
Select
Balance
Intelligent Volume:
Surround: Off
Off
“Sound” (see L)
“Sound Mode”: “Dynamic” “Standard” “Custom”
“Sound Adjustment”: “Adjust”, “Reset”
“Balance”
“Intelligent Volume”: “On” “Off”
“Surround”: “TruSurround” “WOW” “Simulated”
“Off”
Confirm
End
Channel Setup
Select
Manual Program
Auto Program
Program Sorting/Edit
FM Radio Setup
“Channel Setup” (see M)
“Auto Program”
“Manual Program”
“Program”: “00” - “99”
“TV System”: “B/G” “I” “D/K” “M”
“VHF Low”/”VHF High”/”UHF”
“Fine”: “Auto” “Manual”
“Signal Booster”: “Auto” “Off”
“Program Sorting/Edit”
“FM Radio Setup”
Confirm
End
Setup
Select
Picture Rotation
Language:
Video Label
Color System:
Wake Up Timer Beep:
Auto
Factory Settings
On
English
“Setup” (see N)
“Language”: “English” ” (Russian)
“Picture Rotation”
“Video Label”: “Video Input”, “Label”
“Color System”: “Auto” “PAL” “SECAM” “NTSC3.58”
“NTSC4.43”
“Wake Up Timer Beep”: “On” “Off”
“Factory Settings”: “Yes” “No”
Note
When a feature is dimmed in the menu, it is not selectable.
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM15
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
K Changing the “Picture” setting
The “Picture” menu allows you to adjust settings below.
1
Press WEGA GATE and select “Settings”.
2
Make sure the “Picture” icon ( ) is selected, then press .
3
Press V or v to select the desired item (e.g., “Picture Mode”), then press .
Select To
“Picture Mode” choose either “Vivid” (bright, contrast and sharp),
“Standard” (normal) or “Custom”*.
“Color Temperature” adjust white color tint.
Choose either “Cool” (blue tint), “Neutral” (neutral tint) or
“Warm” (red tint).
“VM” sharpen the edges of each object.
(Velocity Modulation) Choose either “High”, “Low” or “Off”.
“Intelligent Picture” optimize picture quality.
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
“Signal Level Indicator” display the signal level when the “Intelligent Picture” is
functioning.
“Intelligent Picture Signal Level” indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red amber green
(weak) (average) (good)
Press V or v to select “On”, then press .
To cancel, select “Off”, then press . “Intelligent Picture” is
still functioning.
*You can adjust the setting to your personal preference in the “Picture Adjustment”,
“Color Temperature” and “VM” options only when the “Custom” mode is selected.
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM16
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Adjusting the “Picture Adjustment” items under “Custom”
mode
1
Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,
“Hue” (color tones) or “Sharpness”, then press
.
Selecting “Reset” will set your TV to the factory settings.
2
Press V,v,B or b to adjust the setting of your selected item, then press .
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “Custom”.
Notes
“Hue” can be adjusted for the NTSC color system only.
Reducing “Sharpness” can also reduce picture noise.
Changing the “Picture” setting (continued)
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM17
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
L Changing the “Sound” setting
The “Sound” menu allows you to adjust settings below.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Sound” icon ( ), then press .
3
Press V or v to select the desired item (e.g., “Sound Mode”), then press .
Select To
“Sound Mode” choose either “Dynamic” (low and high tones), “Standard”
(voice and high tones) or “Custom”*.
“Balance” Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
“Intelligent Volume” adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
“Surround” choose either “TruSurround”(surround sound that spreads
out to the rear of a room), “WOW”** (full, deep bass sound),
“Simulated” (stereo-like monaural sound) or “Off”.
*You can adjust the setting to your personal preference in the “Sound Adjustment”
option only when the “Custom” mode is selected.
** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW
mode.
Note
“Intelligent Volume” is not selectable when “TruSurround” is selected.
Adjusting the “Sound Adjustment” items under “Custom”
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of “Custom” mode in the menu.
1
Make sure that “Adjust” is selected, then press .
Selecting “Reset” will set your TV to the factory settings.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press .
The adjusted settings will be received when you select “Custom”.
Notes
Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
•You may display the settings directly by using button on the remote control (see G).
01GB04AVD-SOEMRus.p65 5/15/07, 2:06 PM18
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
M Changing the “Channel Setup”
setting
The “Channel Setup” menu allows you to adjust settings below.
1
Press WEGA GATE and select “Settings”.
2
Press V or v to select the “Channel Setup” icon ( ), then press .
3
Press V or v to select the desired item (e.g., “Auto Program”), then press .
Select To
“Auto Program” preset channels automatically.
“Manual Program” manually preset desired channels and channels that cannot
be preset automatically (see Presetting channels manually).
“Program Sorting/Edit” change the order in which the channels appear on the screen,
label the program number, skip the program number and
block unwanted programs (see step 3 of the section “Initial
Setup” in D).
“FM Radio Setup”* preset up to nine FM radio stations.
You can manually preset each FM radio station that can be
received in your area and then store the radio frequency of
the desired FM radio stations.
(1) Press V or v to select the desired FM radio station
position, then press .
(2) Press V or v to search the FM radio stations.
Searching stops automatically when a station is tuned in.
If the station has a weak signal, press B or b to fine tune
the radio frequency manually, then press to store the
FM radio station.
(3) You may edit the FM radio station label. Press V or v to
select alphanumeric characters for the label, then press
.
(4) Repeat steps (1) through (3) to preset other FM radio
stations.
* The “FM Radio Setup” feature is only available in FM
Radio mode. To enable this feature, access to FM Radio
mode by using WEGA GATE system (see I) or
pressing the FM button on the top control panel (see H),
then preset your desired FM radio stations according to
the steps mentioned above.
Notes
If you preset a blocked program number, that program number will be unblocked
automatically.
If you sort a blocked program, that program will remain blocked.
01GB05ADJ-SOEMRus.p65 5/15/07, 2:07 PM19
Black
Sony KV-AZ212M91 Group B25 (GB (dummy))_2-687-422-E2 (1)
Presetting channels manually
1
After selecting “Manual Program”, select the program
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press
.
(2) Press V or v
until the program number you want
to preset appears on the menu, then press
.
2
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press .
3
If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press V or v
to select “TV System”, then press .
(2) Press V or v
until the sound becomes normal, then press .
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press V or v
to select “Fine”, then press .
(2) Press V or v
to select “Manual”, then press .
(3)
Press V,v,B or b until the picture and sound quality are optimal, then press .
The + or – icon on the menu flashes while tuning.
5
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press V or v
to select “Signal Booster”, then press .
(2) Press V or v
to select either “Off” (for picture distorted; picture with lines;
signal interference) or “Auto” (for snowy picture), then press
.
Changing the “Channel Setup” setting (continued)
01GB05ADJ-SOEMRus.p65 5/15/07, 2:07 PM20
Black
1 / 1

Sony KV-AZ212 Руководство пользователя

Категория
Телевизоры CRT
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ

на других языках