HOTPOINT/ARISTON 7HKRO 642 DO X RU/HA Руководство пользователя

Категория
Кухонные плиты (варочные панели)
Тип
Руководство пользователя

Это руководство также подходит для

Operating Instructions
Contents
Warnings,
Installation, 2-4
Positioning
Electrical connection
Extendable cooking zones
Description of the appliance, 5-6
Control panel
Start-up and use, 7-10
Switching on the hob
Switching on the cooking zones
Switching off the cooking zones
Power function
Heating elements
Programming the cooking duration
Timer
Control panel lock
Switching off the hob
“Demo” mode
Practical advice on using the appliance
Safety devices
Practical cooking advice
Precautions and tips, 11
General safety
Disposal
Care and maintenance, 12
Switching the appliance off
Cleaning the appliance
Disassembling the hob
Technical description of the models, 13
HOB
GB
GB
English,1
RS
Русский, 14
RO 642 TOIRFH
7HKRO642 DO X RU/HA
7HKRO 642 TOX RU/HA
7HKRO 642 D X RU/HA
7HKRO 642 TO B RU/HA
7HKRO 642 D Z RU/HA
7HKRO 642 TO Z RU/HA
2
GB
WARNING: The appliance and
its accessible parts become hot
during use.
Care should be taken to avoid
touching heating elements.
Children less than 8 years of
age shall be kept away unless
continuously supervised.
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved. Children shall not
play with the appliance. Cleaning
and user maintenance shall not
be made by children without
supervision.
WARNING: Unattended cooking
on a hob with fat or oil can be
dangerous and may result in fire.
NEVER try to extinguish a fire with
water, but switch off the appliance
and then cover flame e.g. with a lid
or a fire blanket.
WARNING: Danger of fire: do
not store items on the cooking
surfaces.
WARNING: If the surface in glass-
ceramic is cracked, switch off the
appliance to avoid the possibility of
electric shock.
Never use steam cleaners
or pressure cleaners on the
appliance.
The appliance is not intended to be
operated by means of an external
timer or separate remote control
system.
WARNING!
3
GB
Installation
! Before operating your new appliance please read
this instruction booklet carefully. It contains important
information concerning the safe operation, installation
and maintenance of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to any new owners of the
appliance.
Positioning
! Keep all packaging material out of the reach of
children. It may present a choking or suffocation
hazard (see Precautions and tips).
! The appliance must be installed by a qualified
professional in accordance with the instructions
provided. Incorrect installation may cause harm to
people and animals or may damage property.
Built-in appliance
Use a suitable cabinet to ensure that the appliance
functions properly.
The supporting surface must be heat-resistant up to
a temperature of approximately 100°C.
If the appliance is to be installed above an oven,
the oven must be equipped with a forced ventilation
cooling system.
Avoid installing the hob above a dishwasher: if this
cannot be avoided, place a waterproof separation
device between the two appliances.
Depending on the hob you want to install, the
cabinet must have the following dimensions (see
gure):
Ventilation
To allow adequate ventilation and to avoid overheating of
the surrounding surfaces the hob should be positioned as
follows:
At a minimum distance of 40 mm from the back
panel.
So that a minimum distance of 20 mm is maintained
between the installation cavity and the cabinet
underneath.
Kitchen cabinets adjacent to the appliance and taller
than the top of the hob must be at least 600 mm
from the edge of the hob.
FRONT SIDE
OF HOB
SUPPORTING
SURFACE
30
40
UNDERSIDE
OF HOB
5 mm
min. 20 mm
min. 20 mm
min. 40 mm
COMPARTMENT
5 mm
min. 40 mm
FAN-ASSISTED
OVEN
560 +/- 1
490 +/- 1
48
590
520
560 +/- 1
490 +/- 1
48
574
504
4
GB
Fixing
The appliance must be installed on a perfectly level
supporting surface.
Any deformities caused by improper fixing could affect
the features and operation of the hob.
The thickness of the supporting surface
should be taken
into account when choosing
the length of the screws for
the fixing hooks:
30 mm thick: 17.5 mm screws
40 mm thick: 7.5 mm screws
Fix the hob as follows:
1. Use short flat-bottomed screws to fix the 4 alignment
springs in the holes provided at the central point of
each side of the hob.
2. Place the hob in the cavity, make sure it is in a
central position and push down on the whole perimeter
until the hob is stuck to the supporting surface.
3. For hobs with raised sides: After inserting the hob
into its cavity, insert the 4 fixing hooks (each has its
own pin) into the lower edges of the hob, using the
long pointed screws to fix them in place, until the glass
is stuck to the supporting surface.
! The screws for the alignment springs must remain
accessible.
! In order to adhere to safety standards, the appliance
must not come into contact with electrical parts once it
has been installed.
! All parts which ensure the safe operation of the
appliance must not be removable without the aid of a
tool.
Electrical connection
! The electrical connection for the hob and for any built-
in oven must be carried out separately, both for safety
purposes and to make extracting the oven easier.
Terminal board
On the lower part of the appliance there is a
connection box for the different types of electricity
supply (the picture is only
an indication and is not an
exact representation of the
purchased model).
Single-phase connection
The hob is equipped with a pre-connected electricity
supply cable, which is designed for single-phase
connection. Connect the wires in accordance with the
instructions given in the following table and diagrams:
Voltage and
mains frequency
Electrical cable Wire connection
230-240V 1+N ~
220-240V 1+N ~
50/60 Hz
: yellow/green
N
: the two blue wires together
L
: brown and black together
Other types of connection
If the mains supply corresponds with one of the following:
Voltage and mains frequency
• 400V - 2+N ~ 50/60 Hz
• 220-240V 3 ~ 50/60 Hz
• 230-240V 3 ~ 50/60 Hz
• 400V - 2+2N ~ 50/60 Hz
Separate the wires and connect them in accordance
with the instructions given in the following table and
diagrams:
Voltage and
mains frequency
Electrical cable Wire connection
400V - 2+N ~
50/60 Hz
230-240V 3 ~
220-240V 3 ~
50/60 Hz
: yellow/green;
N: the two blue wires
together
L1: black
L2: brown
400V - 2+2N ~
50/60 Hz
: yellow/green;
N1: blue
N2: blue
L1: black
L2: brown
If the mains supply corresponds with one of the
following:
Voltage and mains frequency
• 400V 3 - N ~ 50/60 Hz
proceed as follows:
! The cable provided is not suitable for the following
types of installation.
1. Use a suitable supply cable, H05RR-F or higher, with
the right dimensions (cable cross section: 25 mm).
2. To open the terminal board, use a screwdriver as
a lever under the side tabs of the cover (see Terminal
board picture).
3. Loosen the cable clamp screw and the terminal
board screws in accordance with the type of
connection required and position the connection
supports as shown in the following table and diagrams.
4. Position the wires in accordance with the information
given in the following table and diagrams and connect
the appliance by tightening all the screws for the
springs as much as possible.
Voltage and
mains frequency
Electrical connections Terminal board
400V 3-N ~
50/60 Hz
Three-phase 400
UNDERSIDE OF HOB
5
GB
5. Secure the power supply cable by fastening the
cable clamp screw, then put the cover back on.
Three-phase 400
Connecting the electricity supply cable to the mains
If the appliance is being connected directly to the
electricity mains an omnipolar switch must be installed
with a minimum opening of 3 mm between contacts.
! The installer must ensure that the correct electrical
connection has been made and that it is fully compliant
with safety regulations.
Before connecting the appliance to the power supply,
make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated on the data plate
located on the appliance itself.
The voltage falls within the range of values indicated
on the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only.
! The manufacturer declines any liability should
these safety measures not be observed.
! Do not remove or replace the power supply cable
for any reason. Its removal or replacement will void
the warranty and the CE marking. INDESIT does not
assume liability for accidents or damage arising from
replacement/removal of the original power supply
cable. Replacement can only be accepted when
carried out by personnel authorised by INDESIT and
using an original spare part.
U-bolt
connection support
Neutral
Earth
Phase Phase Phase
1
2
3
5
4
Extendable cooking zones
Certain models are fitted with extendable cooking
zones. These may be circular or oval and may vary
in their extensibility (they may be double or triple
hotplates). A list of controls is given below (these
controls are only present in models with the extendable
cooking zone option).
Circular extendable hotplate
DOUBLE HOTPLATE ON button switches on the
double hotplate (see Start-up and use).
DOUBLE HOTPLATE ON indicator light shows
the double hotplate has been switched on.
TRIPLE HOTPLATE ON button switches on the
triple hotplate (see Start-up and use).
TRIPLE HOTPLATE ON indicator light shows the
triple hotplate has been switched on.
Oval extendable hotplate
OVAL HOTPLATE ON button switches on the oval
hotplate (see Start-up and use).
OVAL HOTPLATE ON indicator light shows the oval
hotplate has been switched on.
TRIPLE
HOTPLATE ON
indicator light
TRIPLE
HOTPLATE ON
button
DOUBLE
HOTPLATE ON
indicator light
DOUBLE
HOTPLATE ON
button
OVAL
HOTPLATE ON
indicator light
OVAL
PLATE ON
button
6
GB
Description of the
appliance
Control panel
INCREASE TIME button increases the time value
set on the timer (see Start-up and use).
DECREASE TIME button decreases the time value
set on the timer (see Start-up and use).
COOKING ZONE SELECTOR button shows a
particular cooking zone has been selected and
therefore various adjustments are possible.
COOKING ZONE SELECTOR button is used to
select the desired cooking zone.
POWER indicator provides a visual display for the
current heat level.
ON/OFF button switches the appliance on and off.
ON/OFF indicator light shows whether the appliance
is on or off.
PROGRAMME TIMER button controls the cooking
programme times (see Start-up and use).
PROGRAMME TIMER display shows which
programme has been selected (see Start-up and use).
COOKING ZONE PROGRAMMED indicator lights
show which cooking zones are being used during a
cooking programme (see Start-up and use).
CONTROL PANEL LOCK button prevents
accidental changes to the hob settings (see Start-up
and use).
CONTROL PANEL LOCK indicator light shows the
control panel has been locked (see Start-up and use).
COOKING ZONE POWER SELECTOR buttons
switch on the hotplate and control the power (see
Start-up and use).
TIMER indicator light shows that the timer has been
activated
! This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode.
If no operations are carried out for a period of 2
minutes, after the residual heat indicator lights turn
off and the fan stops (if present), the appliance
automatically switches to the “off mode”.
The appliance resumes the operating mode once the
ON/OFF button is pressed.
The control panel described in this manual is only a representative example: it may not exactly match the panel on
your appliance.
7
GB
Start-up and use
! The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
! A few seconds after the hob is connected to the
electricity supply, a buzzer will sound. The hob may
now be switched on.
! If the - or + button is pressed for an extended
period of time, the display scrolls quickly though the
power levels and timer minutes.
Switching on the hob
To switch the hob on, press and hold the button
for approximately one second.
Switching on the cooking zones
Each cooking zone is controlled using a selector
button
and a power adjustment device consisting
of power level selector buttons between the values of 0
and 9.
To begin operating a cooking zone, press the
corresponding control button and set the desired
power level using the power level selector buttons
between 0 and 9.
Switching off the cooking zones
To switch off a cooking zone, select it using the
corresponding selector button
and:
Press power level selector button 0: this immediately
returns the power setting to 0 and the cooking zone
switches off.
Power function
The power function for the cooking zones may be used
to shorten heating-up times. Activate and set the power
level for the desired cooking zone
as described
in the previous paragraph. Press and hold the selector
button corresponding to the desired cooking zone
for at least 2 seconds. The display, the power level
indicator, will alternately show the letter “P” and the
power level set previously until the desired power level
has been reached. Once this level has been reached,
the display will revert to showing the set power level.
To deactivate this function, press and hold – for at
least 2 seconds - the selector button corresponding
to the cooking zone on which the
function has
been activated; alternatively, select a different power
level between 0 and 9 using the power level selector
buttons.
Heating elements
Two types of heating element may be installed,
depending on the appliance model: halogen and
radiant elements.
Halogen elements emit heat via radiation from the
halogen lamps they contain.
They have similar properties to gas burners: they are
easy to control and reach set temperatures quickly,
allowing you to see the power level instantly.
Radiant elements consist of a series of coils which
allow heat to be distributed evenly at the base of
the cookware, so that all slow-flame cooking may be
performed successfully, for example stews, sauces or
reheated dishes.
Programming the cooking duration
! All the cooking zones may be programmed
simultaneously, for a duration between 1 and 99
minutes.
1. Select the cooking zone using the corresponding
selector button.
2. Adjust the power level.
3. Press the
programming button. The indicator
light corresponding to the selected zone will start
flashing.
4. Set the cooking duration using the
- and +
buttons.
5. Confirm by pressing the
button or automatic
selection occurs after 10 seconds.
The timer begins counting down immediately. A buzzer
sounds for approximately 1 minute and the cooking
zone switches off when the set programme has
finished.
Repeat the above procedure for each hotplate you
wish to programme.
Using multiple programmes and the display
If one or more hotplates are programmed, the display
will show the data for the hotplate with the least time
remaining, and the light corresponding to the position
of the hotplate will flash. The lights corresponding to
the other hotplates programmed will be switched on.
8
GB
To visualise the time remaining for the other
programmed hotplates, press the
button
repeatedly: the time remaining for each hotplate will be
shown sequentially in clockwise order, starting from the
front left hotplate.
Changing the programme
1. Press the
button repeatedly
until the duration you wish to change is
shown.
2. Use the
buttons to set the new duration.
3. Confirm by pressing the
button.
To cancel a programme, follow the above instructions.
At step 2, press the
- button: the duration decreases
progressively until it reaches 0 and switches off. The
programme resets and the display exits programming
mode.
Timer
The hob must be switched on.
The timer can be used to set a duration up to 99
minutes.
1. Press the
programming button until the timer
indicator light is illuminated
.
2. Set the desired duration using the
- and +
buttons.
3. Confirm by pressing the
button.
The timer begins counting down immediately. When
the time has elapsed, a buzzer will sound (for one
minute).
Control panel lock
When the hob is switched on, it is possible to lock the
oven controls in order to avoid accidental changes
being made to the settings (by children, during
cleaning, etc.). Press the
button to lock the control
panel: the indicator light above the button will switch
on.
To use any of the controls (e.g. to stop cooking), you
must switch off this function. Press the
button for a
few moments, the indicator light will switch off and the
lock function will be removed.
Switching off the hob
Press the button to switch the appliance off.
If the control panel lock has been activated, the
controls will continue to be locked even after the hob is
switched on again. In order to switch the hob on again,
you must first remove the lock function.
“Demo” mode
It is possible to set the hob to a demonstration mode
where all the controls work normally but the heating
elements do not switch on. To activate the “demo”
mode the hob must be switched on, with all the
hotplates switched off.
Press and hold the
+ and - buttons
simultaneously for 6 seconds. When the 6 seconds
have elapsed, the ON/OFF and CONTROLS
LOCKED indicator lights will flash for one second.
Release the
+ and - buttons and press the
button;
The display will show the text DE and MO and the
hob will be switched off.
When the hob is switched on again it will be set to
the “demo” mode.
To exit this mode, follow the procedure described
above. The display will show the text DE and OF and
the hob will be switched off. When it is next switched
on, the hob will function normally.
Practical advice on using the appliance
To obtain the best results from your hob:
Use pans with a thick, flat base in order to fully
utilise the cooking zone.
Always use pans with a diameter which is large
enough to cover the hotplate fully, in order to use all
the available heat.
Make sure that the base of the cookware is always
clean and dry, in order to fully utilise and extend the
life of both the cooking zones and the cookware.
Avoid using the same cookware which has been
used on gas burners: the heat concentration on gas
9
GB
burners may distort the base of the pan, causing it
not to adhere correctly.
Safety devices
Pan sensor
Each cooking zone is equipped with a pan sensor
device. The hotplate only emits heat when a pan with
suitable measurements for the cooking zone is placed
on it. If the indicator light is flashing, it may indicate:
An incompatible pan
A pan whose diameter is too small
The pan has been removed from the hotplate.
Residual heat indicators
Each cooking zone is equipped with a residual heat
indicator. This indicator signals which cooking zones
are still at a high temperature. If the power display
shows
, the cooking zone is still hot. It is possible,
for example, to keep a dish warm or melt butter or
chocolate. As the cooking zone cools, the power
display will show
. The display switches off when the
cooking zone has cooled sufficiently.
Overheating protection
If the electronic elements overheat, the hob switches
off automatically and
F appears on the display,
followed by a flashing number. When the temperature
has reached a suitable level, this message disappears
and the hob may be used again.
Safety switch
The appliance has a safety switch which automatically
switches the cooking zones off after they have been
in operation for a certain amount of time at a particular
power level. When the safety switch has been
triggered, the display shows “0”.
For example: the right rear hotplate is set to 5 and will
switch off after 5 hours of continuous operation, while
the front left hotplate is set to 2 and will switch off after
8 hours.
Power level
1
2
3
4
5
6
7
8
9
Maximum operating time in hours
9
8
7
6
5
4
3
2
1
Buzzer
This can also indicate several irregularities:
An object (a pan, cutlery, etc.) has been placed on
the control panel for more than 10 seconds.
Something has been spilt on the control panel.
A button has been pressed for too long. All of the
above situations may cause the buzzer to sound.
Remove the cause of the malfunction to stop the
buzzer. If the cause of the problem is not removed,
the buzzer will keep sounding and the hob will
switch off.
10
GB
Practical cooking advice
ª
Pressure cooking
Pressure cooker
Frying
Grilling Boiling
Very high-flame
cooking
High-flame
cooking
Medium-flame cookingLow-flame
cooking
Very
low-flame
cooking
Crêpes Cooking on a high flame and browning
(roasts, steaks, escalopes, fish fillets,
fried eggs)
§
Fast thickening (liquid juices)
Boiling water (pasta, rice, vegetables)
Milk
§
S
Slow thickening (dense juices)
S
¢
Bain-marie cooking
Pressure cooking after whistle
¢
£
Low-flame cooking (stews)
Reheating dishes
¡
Chocolate sauce Keeping food hot
11
GB
Precautions and tips
! This appliance has been designed and manufactured
in compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low Voltage) and
subsequent amendments;
- 2004/108/EEC dated 15/12/04 (Electromagnetic
Compatibility) and subsequent amendments;
- 93/68/EEC dated 22/07/93 and subsequent amendments.
- 1275/2008 stand-by/off mode.
General safety
! Make sure that the air inlet behind the fan grille is
never obstructed. The built-in hob should, in fact, be
provided with suitable ventilation for the cooling of the
electronic components used in the appliance.
The appliance was designed for domestic use inside
the home and is not intended for commercial or
industrial use.
The appliance must not be installed outdoors, even
in covered areas. It is extremely dangerous to leave
the appliance exposed to rain and storms.
Do not touch the appliance when barefoot or with
wet or damp hands and feet.
The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions outlined in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous.
The manufacturer may not be held liable for any
damage resulting from improper, incorrect and
unreasonable use of the appliance.
The glass ceramic hob is resistant to mechanical
shocks, but it may crack (or even break) if hit with
a sharp object such as a tool. If this happens,
disconnect the appliance from the electricity mains
immediately and contact a Service Centre.
Ensure that power supply cables of other electrical
appliances do not come into contact with the hot
parts of the hob.
Remember that the cooking zones remain relatively
hot for at least thirty minutes after they have been
switched off. An indicator light provides a warning
when residual heat is present (see Start-up and use).
Keep any object which could melt away from the
hob, for example plastic and aluminium objects, or
products with a high sugar content. Be especially
careful when using plastic film and aluminium foil or
packaging: if placed on surfaces which are still hot,
they may cause serious damage to the hob.
Always make sure that pan handles are turned
towards the centre of the hob in order to avoid
accidental burns.
When unplugging the appliance, always pull the
plug from the mains socket; do not pull on the cable.
Never perform any cleaning or maintenance work
without having disconnected the appliance from the
electricity mains.
The appliance should not be operated by people
(including children) with reduced physical, sensory
or mental capacities, by inexperienced individuals
or by anyone who is not familiar with the product.
These individuals should, at the very least, be
supervised by someone who assumes responsibility
for their safety or receive preliminary instructions
relating to the operation of the appliance.
Do not look at the halogen lamps in the cooking
zones for long if they are present.
Do not let children play with the appliance.
Do not place metal objects (knives, spoons, pan
lids, etc.) on the hob as they may become hot.
The appliance is not intended to be operated by
means of an external timer or separate remote-
control system.
Disposal
When disposing of packaging material: observe
local legislation so that the packaging may be
reused.
The European Directive 2002/96/EC relating
to Waste Electrical and Electronic Equipment
(WEEE) states that household appliances should
not be disposed of using the normal solid urban
waste cycle. Exhausted appliances should be
collected separately in order to optimise the cost
of re-using and recycling the materials inside the
machine, while preventing potential damage to the
atmosphere and to public health. The crossed-out
dustbin is marked on all products to remind the
owner of their obligations regarding separated
waste collection.
For further information relating to the correct
disposal of exhausted household appliances,
owners may contact the public service provided or
their local dealer.
12
GB
Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the appliance
! Do not use abrasive or corrosive detergents
(for example, products in spray cans for cleaning
barbecues and ovens), stain removers, anti-rust
products, powder detergents or sponges with abrasive
surfaces: these may scratch the surface beyond repair.
! Never use steam cleaners or pressure cleaners on the
appliance.
It is usually sufficient simply to wash the hob using
a damp sponge and dry it with absorbent kitchen
towel.
If the hob is particularly dirty, rub it with a special
glass ceramic cleaning product, then rinse well and
dry thoroughly.
To remove more stubborn dirt, use a suitable
scraper. Remove spills as soon as possible, without
waiting for the appliance to cool, to avoid residues
forming crusty deposits. You can achieve excellent
results by using a rust-proof steel wire sponge -
specifically designed for glass ceramic surfaces -
soaked in soapy water.
If any plastic or sugary substances are accidentally
melted on the hob, remove them immediately with
the scraper, while the surface is still hot.
Once it is clean, the hob may be treated with
a special protective maintenance product: the
invisible film left by this product protects the surface
from drips during cooking. This maintenance task
should be carried out while the appliance is warm
(not hot) or cold.
Always remember to rinse the appliance well with
clean water and dry it thoroughly: residues can
become encrusted during subsequent cooking
processes.
Stainless steel frame (only in models with outer frame)
Stainless steel can be marked by hard water which has
been left on the surface for a long time, or by cleaning
products containing phosphorus.
After cleaning, it is advisable to rinse the surface well
and dry it thoroughly. If water is spilt on the surface,
dry it quickly and thoroughly.
! Some hobs have an aluminium frame which is
similar to stainless steel. Do not use any cleaning or
degreasing products which are not suitable for use
with aluminium.
Disassembling the hob
If it is necessary to disassemble the hob:
1. Loosen the screws fixing the alignment springs on
each side.
2. Loosen the screws holding the fixing hooks in each
corner.
3. Take the hob out of its installation cavity.
! Do not attempt to repair the appliance yourself. If the
appliance breaks down, contact a Service Centre.
13
GB
Technical description of
the models
This table provides a model-by-model list of the energy absorption values, type of heating elements and diameters
of each cooking zone.
Key:
H = single hilight
HO = oval hilight
HD = double hilight
HT = triple hilight
Hobs
7HKRO 642 D X RU/HA
7HKRO 642 D Z RU/HA
7HKRO 642 TO B RU/HA
7HKRO 642 TO Z RU/HA
7HKRO 642 TO X RU/HA
RO 642 TOIRFH
Cooking zone
Power (W)
Diameter (mm)
Power (W)
Diameter (mm)
Back Left
HD 2200/1000 210/140 HT 2300/1600/800 230/180/120
Back Right
H 1400 160 H 1200 145
Front Left
H 1200 145 H 1200 145
Front Right
HD 1700/700 180/120 HO 2400/1500 170x260
Total power
6500 7100
7HKRO 642 DO X RU/HA
Power (W)
Diameter (mm)
HD 2200/1000
230/180/120
H 1200 145
H 1200 145
HO 2400/1500 170x260
7000
Руководство по
эксплуатации
Содержание
ВНИМАНИЕ, 15
Монтаж, 16-18
Расположение
Электрическое подключение
Описание изделия, 19-20
Панель управления
Расширяющиеся варочные зоны
Включение и эксплуатация, 21-24
Включение варочной панели
Включение варочных зон
Выключение варочных зон
Функция power
Нагревательные элементы
Программирование продолжительности приготовления
Таймер
Блокировка управлений
Выключение варочной панели
Modalitа Режим «demo»
Практические советы по эксплуатации изделия
Защитные устройства
Практические советы по приготовлению блюд
Предосторожности и рекомендации, 25
Общие требования к безопасности
Утилизация
Техническое обслуживание и уход, 26
Обесточивание изделия
Чистка изделия
Порядок демонтажа варочной панели
Техническое описание моделеи, 27
ВАРОЧНАЯ ПАНЕЛЬ
English,1
RS
RS
GB
Русский, 14
RO 642 TOIRFH
7HKRO642 DO X RU/HA
7HKRO 642 TOX RU/HA
7HKRO 642 D X RU/HA
7HKRO 642 TO B RU/HA
7HKRO 642 D Z RU/HA
7HKRO 642 TO Z RU/HA
15
RS
ВНИМАНИЕ: Данное изделие и его
доступные комплектующие сильно
нагреваются в процессе эксплуатации.
Будьте осторожны и не касайтесь
нагревательных элементов.
Не разрешайте детям младше 8 лет
приближаться к изделию без контроля.
Данное изделие может быть
использовано детьми старше 8
лет и лицами с ограниченными
физическими, сенсорными или
умственными способностями или
без опыта и знания о правилах
использования изделия при условии
надлежащего контроля или обучения
безопасному использованию изделия
с учетом соответствующих рисков. Не
разрешайте детям играть с изделием.
Не разрешайте детям осуществлять
чистку
и уход за изделием без
контроля взрослых.
ВНИМАНИЕ: Опасно оставлять
включенную конфорку с маслом или
жиром без присмотра, так как это
может привести к пожару.
НИКОГДА не пытайтесь погасить
пламя/пожар водой. Прежде всего
выключите изделие и накройте пламя
крышкой или огнеупорной тканью.
ВНИМАНИЕ: Опасность пожара: не
оставляйте предметов на варочных
поверхностях.
ВНИМАНИЕ: Еслстеклокерамическая
поверхность варочной панели
треснула, выключите ее во избежание
ударов током.
Никогда не используйте паровые
чистящие агрегаты или агрегаты
под высоким давлением для чистки
изделия.
Изделие не рассчитано на влючение
посредством внешнего синхронизатора
или отдельной системы
дистанционного управления.
ВНИМАНИЕ !
16
RS
Монтаж
! Важно сохранить данное руководство для его
последующих консультации. В случае продажи,
передачи изделия или при переезде на новое
место жительства необходимо проверить, чтобы
руководство оставалось вместе с изделием, для
того чтобы его новыи владелец мог ознакомиться
с правилами эксплуатации и с соответствующими
предупреждениями.
! Внимательно прочитаите инструкции: в них
содержатся важные сведения о монтаже изделия,
его эксплуатации и безопасности.
Расположение
! Не разрешаите детям играть с упаковочными
материалами. Упаковка должна быть уничтожена
в соответствии с правилами сбора мусора (см.
Предосторожности и рекомендации).
! Монтаж изделия производится в соответствии
с данными инструкциями квалифицированными
специалистами. Неправильный монтаж изделия
может стать причиной повреждения имущества и
причинить ущерб людям и домашним животным.
Встроенный монтаж
Для обеспечения исправного функционирования
встраиваемого изделия кухонный модуль должен
иметь соответствующие характеристики:
поверхность кухонного топа должна быть из
материала, устойчивого к температуре примерно
100°C;
если варочная панель устанавливается над
духовым шкафом, он должен быть оснащен
системой охлаждения с принудительной
вентиляцией.
не рекомендуется устанавливать варочную
панель над посудомоечными машинами: при
необходимости установите между варочной
панелью и посудомоечной машиной герметичную
разделительную вставку;
в зависимости от модели варочной панели,
которую вы устанавливаете (см. схемы),
размеры
ниши в кухонном модуле должны быть
следующими:
Вентиляция
Для обеспечения надлежащей вентиляции и во
избежание
перегрева прилегающих поверхностеи варочная
панель должна быть установлена:
на минимальном расстоянии 40 мм от задней
стенки;
5 mm
min. 20 mm
min. 20 mm
min. 40 mm
Ящик
5 mm
min. 40 mm
Вентилируемая
560 +/- 1
490 +/- 1
48
590
520
560 +/- 1
490 +/- 1
48
574
504
17
RS
между проемом под варочную панель и
расположенным снизу кухонным элементом
должно быть расстояние не менее 20 мм.
Кухонные элементы, расположенные рядом с
кухонной плитой, высота которых превышает
уровень варочной панели, должны находиться на
расстояние не менее 600 мм от края варочной
панели.
Крепление
Изделие должно быть установлено на идеально
ровнои поверхности.
Возможные деформации, вызванные неправильным
креплением, могут привести к изменениям
характеристик и эксплуатационных качеств
варочнои панели.
Длина регуляционного винта крепежных крюков
регулируется перед началом монтажа по толщине
кухонного топа:
толщина 30 мм: длина винта 17,5 мм;
толщина 40 мм: длина винта 7,5 мм;
Порядок крепления изделия:
1. При помощи коротких тупых шурупов
привинтите 4 центровочные пружины в отверстиях,
расположенных по бокам варочнои панели;
2. Вставьте варочную панель в проем в кухонном
модуле, выровняите и слегка нажмите в центр
вплодь до идеального
прилегания варочнои панели
к поверхности кухонного топа.
3. для варочных панелеи с боковыми профилями:
вставив варочную панели в нишу кухонного модуля,
вставьте 4 крепежных крюка (каждыи со своим
штифтом) по нижнему периметру варочнои панели,
закручивая их длинными острыми болтами до
тех пор, пока стекло не будет плотно прилегать к
кухонному топу.
! Важно, чтобы шурупы центровочных пружин
оставались доступными.
! В соответствии с правилами безопасности после
установки изделия в кухонныи модуль должна быть
исключена возможность касания к электрическими
частями.
! Все защитные элементы должны быть закреплены
таким образом, чтобы их можно было снять только
при помощи специального инструмента.
Электрическое подключение
! Электрическое подключение варочнои панели и
возможного встраиваемого духового шкафа должно
выполняться раздельно по причинам безопасности,
а так же для легкого съема духового шкафа.
Клеммная колодка
В нижнеи части изделие
оснащено колодкои для
подсоединения разных видов
электропитания (рисунок
приводится для примера и
может не соответствовать
модели вашего изделия).
Монофазное соединение
Варочная панель
оснащена сетевым кабелем,
рассчитанным на монофазное электропитание.
Подсоедините провода в соответствии с таблицеи и
приведенным ниже схемам:
Типовое
напряжение
и частота сети
Электрический провод Подсоединение
проводов
230-240V 1+N ~
220-240V 1+N ~
50/60 Hz
: желто-зеленый;
N: 2 синий провода
вместе на
L: коричневый
вместе с черным
Другие типы соединений
Если электропроводка соответствует однои из
следующих характеристик:
Типовое напряжение и частота сети
• 400В - 2+N ~ 50/60 Гц
• 220-240В 3 ~ 50/60 Гц
• 230-240B 3 ~ 50/60 Hz
• 400В - 2+2N ~ 50/60 Гц
Разделите провода и подсоедините проводники
в соответствии с таблицеи и приведенным ниже
схемам:
Типовое
напряжение
и частота сети
Электрический провод Подсоединение
проводов
400V - 2+N ~
50/60 Hz
230-240V 3 ~
220-240V 3 ~
50/60 Hz
: желто-зеленый;
N: 2 синий провода
вместе на
L1: черный
L2: коричневый
400V - 2+2N ~
50/60 Hz
: желто-зеленый;
N1: синий
N2: синий
L1: черный
L2: коричневый
Если электропроводка соответствует однои из
следующих характеристик:
Типовое напряжение и частота сети
• 400В 3 - N ~ 50/60 Гц
выполните следующее:
! Возможныи прилагающиися сетевои кабель нельзя
использовать для такого типа монтажа.
1. Используите надлежащии сетевои кабель типа
H05RR-F или с большим значением, надлежащего
размера (сечение кабеля: 25 мм).
18
RS
2. При помощи отвертки поднимите язычки крышки
клеммнои колодки и откроите ее (см. изображение
клеммнои колодки).
3. Отвинтите прижимнои винт провода и винты
зажимов, соответствующих типу необходимого
соединения, затем установите соединительные
перемычки согласно таблице и приведенным ниже
схемам.
4. Расположите проводники согласно таблице и
приведенным ниже схемам и подсоедините их, до
упора
закрутив все винты зажимов.
Типовое напряжение
и частота сети
Электропитание Зажимная коробка
400V 3-N ~
50/60 Hz
Трехфазный 400
5. Зафиксируите сетевои кабель в специальном
кабельном сальнике и закроите крышку.
Трехфазное 400
Подсоединение сетевого кабеля изделия к сети
электропитания
В случае прямого подключения изделия к сети
необходимо установить между изделием и
электрическои сетью многополярныи разъединитель
с минимальным расстоянием между контактами 3
мм.
! Электромонтер несет ответственность за
правильное подключение изделия к электрическои
сети и за соблюдение правил безопасности.
Перед осуществлением электрического
подсоединения необходимо проверить следующее:
сетевая розетка должна быть соединена с
заземлением и соответствовать нормативам;
сетевая розетка должна быть расчитана на
максимальную потребляемую мощность
изделия, указанную на паспортнои табличке с
техническими характеристиками;
напряжение и частота тока сети должны
соответствовать электрическим данным изделия;
сетевая розетка должна быть совместима со
штепсельнои вилкои изделия. В противном
случае замените розетку или вилку; не
используите удлинители или троиники.
! Изделие должно быть установлено таким образом,
чтобы сетевои кабель и сетевая розетка были легко
доступны.
! Сетевои кабель изделия не должен быть согнут
или сжат.
! Регулярно проверяите состояние сетевого кабеля
и при необходимости поручаите его замену только
уполномоченным техникам.
! Производитель не несет ответственности за
последствия несоблюдения перечисленных
выше требовании.
! Категорически запрещается отсоединять и не
заменять сетевой кабель. В случае отсоединения
или замены сетевого кабеля гарантия на изделие
аннулируется, равно как и маркировка ЕС. Компания
INDESIT снимает с себя всякую ответственность
за несчастные случаи или ущерб, вызванный
отсоединением или заменой оригинального
сетевого кабеля. Допускается замена только на
оригинальный сетевой кабель,
выполняемая
техником, уполномоченным Компанией INDESIT.
1
2
3
5
4
19
RS
Описание изделия
Панель управления
Кнопка УВЕЛИЧЕНИЕ ВРЕМЕНИ для
увеличения времени таймера (см. Включение и
эксплуатация).
Кнопка УМЕНЬШЕНИЕ ВРЕМЕНИ для
уменьшения времени таймера (см. Включение и
эксплуатация).
Индикатор ВЫБРАННАЯ ВАРОЧНАЯ ЗОНА
показывает, что соответствующая варочная
зона была выбрана и следовательно возможно
произвести настроики ее функции.
Кнопка ВЫБОР ВАРОЧНОИ ЗОНЫ служит для
выбора нужнои варочнои
зоны.
Индикатор МОЩНОСТЬ: показывает уровень
нагрева.
Кнопка ON/OFF (ВКЛ./ВЫКЛ.) служит для
включения и выключения изделия.
Индикатор ON/OFF (ВКЛ./ВЫКЛ.): показывает
состояние изделия, включено или выключено.
Кнопка ТАИМЕР ПРОГРАММИРОВАНИЯ служит
для настроики продолжительности приготовления
(см. Включение и эксплуатация).
Дисплеи ТАИМЕРА ПРОГРАММИРОВАНИЯ:
показывает различные настроики
программирования (см. Включение
и
эксплуатация).
Индикаторы ЗАПРОГРАММИРОВАННЫЕ
ВАРОЧНЫЕ ЗОНЫ: показывают варочные зоны
после запуска программирования ( см. Включение
и эксплуатация).
Кнопка БЛОКИРОВКА УПРАВЛЕНИИ служит
для защиты управлении варочнои панели
от случаиных измнении (см. Включение и
эксплуатация).
Индикатор УПРАВЛЕНИЯ ЗАБЛОКИРОВАНЫ
показывает, что управления заблокированы ( см.
Включение и эксплуатация).
Кнопки ВЫБОР МОЩНОСТИ ВАРОЧНЫХ
ЗОН служат для включения варочной зоны и
регуляции мощности нагрева (см. Включение и
эксплуатация).
Индикатор ТАИМЕР показывает, что таимер
включен
! Данное изделие отвечает требованиям новой
Европейской Директивы по ограничению
энергопотребления в режиме энергосбережения.
Если в течение 2-х минут не производится
никаких действий после выключения
индикаторов остаточного тепла и вентилятора
(если они присутствуют), изделие
автоматически переходит в режим «ВЫКЛ.».
Возврат изделия в рабочий режим
производится кнопкой ВКЛ./ВЫКЛ.
Панель управления, описание которои приводится ниже, служит только в качестве примера: она может не в
точности соответствовать Вашеи модели.
20
RS
Расширяющиеся варочные зоны
В некоторых моделях имеются расширяющиеся варочные зоны. Они могут быть разнои формы (круглои или
овальнои) и различного радиуса расширения (двоиная или троиная варочная зона). Ниже приводится описание
соответствующих управлении, имеющихся только в моделях, оснащенных этими функциями.
Круглая расширяющаяся варочная зона
Кнопка ВКЛЮЧЕНИЕ ДВОИНОИ ВАРОЧНОИ
ЗОНЫ служит для включения двоинои конфорки
(
см. Включение и эксплуатация).
Индикатор ДВОИНАЯ ВАРОЧНАЯ ЗОНА
ВКЛЮЧЕНА: показывает, что двоиная варочная
зона включена.
Кнопка ВКЛЮЧЕНИЕ ТРОИНОИ ВАРОЧНОИ
ЗОНЫ служит для включения троинои конфорки
(см. Включение и эксплуатация).
Индикатор ТРОИНАЯ ВАРОЧНАЯ ЗОНА
ВКЛЮЧЕНА: показывает, что троиная варочная
зона включена.
Овальная расширяющаяся варочная зона
Кнопка ВКЛЮЧЕНИЕ ОВАЛЬНОИ ВАРОЧНОИ
ЗОНЫ
служит для включения овальной варочной
зоны (см. Включение и эксплуатация).
Индикатор ОВАЛЬНАЯ ВАРОЧНАЯ ЗОНА
ВКЛЮЧЕНА: показывает, что овальная варочная
зона включена.
1 / 1

HOTPOINT/ARISTON 7HKRO 642 DO X RU/HA Руководство пользователя

Категория
Кухонные плиты (варочные панели)
Тип
Руководство пользователя
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ

на других языках