NP 6401 S

Novex NP 6401 S, NP 3600 S, NP 3601 S, NP 6400 S, NP 6402 S, NP 6403 S Руководство пользователя

  • Здравствуйте! Я ознакомился с руководством пользователя для встраиваемой электрической варочной панели NOVEX H10-20-260-149. В нем подробно описывается установка, эксплуатация, техническое обслуживание и устранение неполадок. Задавайте ваши вопросы, и я постараюсь на них ответить, основываясь на информации из этого документа. Например, вы можете спросить о правильной установке, рекомендациях по чистке или о том, как устранить неисправности.
  • Как правильно установить варочную панель?
    Какие средства использовать для чистки варочной поверхности?
    Что делать, если варочная панель не работает?
BUILT-IN
COOKTOP
USER MANUAL
GB
RU
H10-20-260-149 Rev 005
Electric
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
Электрическая варочная
поверхность
BUILT-IN
COOKTOP
USER MANUAL
GB
RU
H10-20-260-149 Rev 005
Electric
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
Электрическая варочная
поверхность
2
Dear User,
Our objective is to make this product provide you with the best output
which is manufactured in our modern facilities in a careful working
environment, in compliance with total quality concept.
Therefore, we suggest you to read the user manual carefully before using
the product and, keep it permanently at your disposal.
Note: This user manual is prepared for more than one model. Some of
the features specied in the Manual may not be available in your appliance.
All our appliances are only for domestic use, not for commercial use.
Products marked with (*) are optional.
“Conforms with the WEEE Regulations.”
GB
3
Contens
Important warnings
4
Methods for protecting ceramic glass cooking surface 10
Electrical connection
12
Introduction of the appliance
13
Technical features 14
Installation of cooktop 15
Counter cutting sizes 18
Control panel
19
Usage of your cooktop
20
Maintenance and cleaning 21
Troubles and solution proposals 22
Handling rules 22
Environmentally-friendly disposal
23
Package information
23
4
IMPORTANT WARNINGS
1. Installation and repair should always be performed
by “AUTHORIZED SERVICE”. Manufacturer shall not be
held responsible for operations performed by unauthorized
persons.
2. Please read this operating instructions carefully.
Only by this way you can use the appliance safely and
in a correct manner.
3. The cooker should be used according to operating
instructions.
4. Keep children below the age of 8 and pets away
when operating.
5. WARNING: Fire hazard; do not store the materials on
the cooking surface.
6. WARNING: The appliance and its accessible parts are
hot during operation.
7. Setting conditions of this device are specied on
the label. (Or on the data plate)
8. The accessible parts may be hot when the grill is
used. Small children should be kept away.
9. WARNING: This appliance is intended for cooking. It
should not be used for other purposes like heating a room.
10. To clean the appliance, do not use steam cleaners.
11. NEVER try to put out the re with water. Only shut
down the device circuit and then cover the ame with
a cover or a re blanket.
GB
5
12. Children under 8 years of age should be kept away,
if they cannot be monitored continuously.
13. Touching the heating elements should be avoided.
14. CAUTION: Cooking process shall be supervised.
Cooking process shall always be supervised.
15. The appliance is not suitable for use with an external
timer or a separate remote control system.
16. This device can be used by children over 8 years of
age, people with physical, hearing or mental challenges
or people with lack of experience or knowledge; as long
as control is ensured or information is provided regarding
the dangers.
17. This device has been designed for household use
only.
18. Children must not play with the appliance. Cleaning
or user maintenance of the appliance shall not be
performed by children unless they are older than 8
years and supervised by adults.
19. Keep the appliance and its power cord away from
children less than 8 years old.
20. Put curtains, tulles, paper or any flammable
(ignitable) material away from the appliance before
starting to use the appliance. Do not put ignitable or
ammable materials on or in the appliance.
21. Keep the ventilation channels open.
22. Do not heat closed cans and glass jars. The pressure
may lead jars to explode.
6
23. Do not use the product in states like medicated
and/or under inuence of alcohol which may affect your
ability of judgement.
24. After each use, check if the unit is turned off.
25. Be careful when using alcohol in your foods. Alcohol
will evaporate at high temperatures and may catch re
to cause a re if it comes in contact with hot surfaces.
26. If the appliance is faulty or has a visible damage,
do not operate the appliance.
27. Do not put objects that children may reach on the
appliance.
28. The packaging materials are dangerous for children.
Keep packaging materials away from the reach of
children.
29. Cooker supply can be disconnected during any
construction work at home. After completing the work,
re-connecting the cooker shall be done by authorized
service.
30. Do not place metal utensils such as knife, fork,
spoon on the surface of the appliance, since they will
get hot.
31. To prevent overheating, the appliance should not
be installed behind of a decorative cover.
32. Turn off the appliance before removing the
safeguards. After cleaning, install the safeguards
according to instructions.
GB
7
33. Cable xing point shall be protected.
34. CAUTION: If the glass of the stove is broken, turn
off any heating element immediately and disconnect the
appliance from power source, do not touch the surface of
the appliance and do not use the appliance.
35. User should not handle the cooker by himself.
36. When not turning of the cooker during cooking,
user can touch hot surfaces causing burns.
37. If heavier loads are places on the cooker, these
loads can trip over. It may cause personal injuries.
38. Allow disconnection of the appliance after
installation, by accessible plug or a switch in the xed
wiring, unless.
8
Electrical Safety
1. Plug the appliance in a grounded socket protected by
a fuse conforming to the values specied in the technical
specications chart.
2. Have an authorized electrician set grounding
equipment. Our company shall not be responsible for
the damages that shall be incurred due to using the
product without grounding according to local regulations.
3. WARNING: If the surface is cracked, turn off the
appliance to avoid risk of electric shock.
4. Never wash the appliance by spraying or pouring
water on it. There is a risk of electrocution.
5. Do not touch the plug with wet hands. Do not pull
the cord to plug off, always hold the plug.
6. Unplug the unit during installation, maintenance,
cleaning and repair.
7. Make sure the plug is inserted rmly into wall socket
to avoid sparks.
8. If the power supply cord (the cord with plug) is
damaged, this cord shall be replaced by the manufacturer
or its service agent or an equally qualied personnel to
prevent a hazardous situation.
9. Do not use cut or damaged cords or extension cords
other than the original cord.
10. Do not use steam cleaners for cleaning the appliance,
otherwise electric shock may occur.
GB
9
11. Make sure there is no liquid or humidity in the
outlet where the product plug is installed.
12. An omnipolar switch capable to disconnect power
supply is required for installation. Disconnection from
power supply shall be provided with a switch or an
integrated fuse installed on xed power supply according
to building code.
13. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
14. Unplug the unit during installation, maintenance,
cleaning and repair.
15. Appliance is equipped with a type ‘’Y’’ cord cable.
16. The circuit breaker switches of the cooker shall
be placed so that end user can reach them when the
cooker is installed.
17. Fixed connections shall be connected to a
power supply enabling omnipolar disconnection.
For appliances with over voltage category below III,
disconnection device shall be connected to xed power
supply according to wiring code.
18. Do not remove ignition switches from the appliance.
Otherwise, live electric cables can be accessed. It may
cause an electric shock.
10
Methods for Protecting Ceramic Glass Cooking Surface
Ceramic glass surface is unbreakable and scratch
resistant to a certain degree. However, to avoid any
damage, please do the following:
1. Never pour cold water on hot cookers.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a falling
salt shaker may be critical. So, do not place such objects
on a place above the hobs.
4. After each use, make sure that the base of the cooking
pot and surfaces of cooking zones are clean and dry.
5. Do not peel vegetables on the hob surfaces. Sand
grains falling from the vegetables may scratch the
ceramic glass plate.
6. Do not lay ammable materials such as cardboard
or plastic on the oven. Objects such as tin, zinc, or
aluminium (as well as aluminium foils or empty coffee
pots) may melt on hot cooking surfaces and thus cause
damage.
7. Take care not to let sugary foods or fruit juices contact
the hot cooking zones. The ceramic glass surface may
be stained by these.
GB
11
Intended Use
1. This product is designed for home use. Commercial
use of the appliance is not permitted.
2. This appliance may only be used for cooking
purposes. It shall not be used for other purposes like
heating a room.
3. The manufacturer assumes no responsibility for any
damage due to misuse or mishandling.
4. Operational life of the product you have purchased
is 10 years. This is the period for which the spare parts
required for the operation of this product as dened is
provided by the manufacturer.
12
Electrical Connection
1. Setting conditions of this appliance is indicated in tag or data plate.
2. Your appliance should be plugged in a fuse appropriate for electric
power. If necessary, it is recommended that installation is done by
authorized service.
3. Your appliance is congured in accordance with electrical supply of
220-240 V AC / 380-415 V 3N AC 50/60 Hz.
4. If main electrical network is different from these values, contact with
your authorized service.
5. Electrical connections of your appliance should only be made to the
fuses having suitably wired grounding (grounded) system. If no convenient
fuse is available in the place where your appliance is to be installed,
contact with authorized service immediately. Manufacturing rm is not
responsible denitely for the damages that fuses whose grounding is not
made and connected to the appliance can cause.
6. Plug of the appliance should be close to be accessed easily to the
fuse whose grounding is made without use of extension cord.
7. Do not allow contacting the power cable of your appliance with hot
regions. Similarly, keep away it from sharp edges and corners.
8. If feeder cord is damaged, this cord should be replaced either by
manufacturer or its service agency or same degree qualied personnel in
order to hinder a dangerous situation.
9. Wrong electrical connection may give damage to the appliance.In
this case, your appliance will remain out of guarantee scope. Electrical
connection of your appliance should be done by authorized service.
Electrical connection scheme
Get electrical connection of your appliance done to authorized person in
line with the following scheme.
H05 VV-F 4G 1,5 mm²
380-415 V 2N~50/60Hz
Earth
Terre
Erdung
Neutral
Neutre
L2
L1
H05 VV-F 5G 1,5 mm²
380-415 V 3N~50/60Hz
Earth
Terre
Erdung
Neutral
Neutre
L3
L2
L1
H05 VV-F 3G 4 mm²
220-240V~50/60Hz
Live
Phase
Neutral
Neutre
Earth
Terre
Erdung
220-240V~50/60H
GB
13
INTRODUCTION OF THE APPLIANCE
1. Heater positions
2. Glass or metal surface
3. Control switches
4. Hotplate (145 mm or 180 mm) *
5. Ceramic heater (180 mm or 140 mm) *
6. Double ceramic heater (120 mm / 180 mm or 220 mm / 300 mm) *
7. Ovaldual ceramic heater (140 mm / 250 mm) *
4
7
6
5
1
2
3
14
Technical features
You can operate electric cooktops by turning the button on control panel
you want to use to the level you desire. Cooktop powers as per levels are
given in the following table.
Specications Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
80 mm hotplate 200 W 250 W 450 W --- --- ---
145 mm hotplate 250 W 750 W 1000 W --- --- ---
180 mm hotplate 500 W 750 W 1500 W --- --- ---
145 mm rapid hotplate 500 W 1000 W 1500 W --- --- ---
180 mm rapid hotplate 850 W 1150 W 2000 W --- --- ---
145 mm hotplate 95 W 155 W 250 W 400 W 750 W 1000 W
180 mm hotplate 115 W 175 W 250 W 600 W 850 W 1500 W
145 mm rapid hotplate 135 W 165 W 250 W 500 W 750 W 1500 W
180 mm rapid hotplate 175 W 220 W 300 W 850 W 1150 W 2000 W
180 mm ceramic heater 1800 W
140 mm ceramic heater 1200 W
140 / 250 mm ceramic heater 1800 W
120 / 180 mm ceramic heater 1700 W
220 / 300 mm ceramic heater 2400 W
Supply voltage 220-240 V AC / 380-415 V 3N AC 50/60 Hz.
WARNING: For the modication to be done by authorized service, this
table should be considered. Manufacturer may not be held responsible for
any problems rising because of any faulty modication.
WARNING: In order to increase the product quality, the technical
specications may be changed without prior notice.
WARNING: The values provided with the appliance or its accompanying
documents are laboratory readings in accordance with the respective
standards. These values may differ depending on the use and ambient
conditions.
GB
15
INSTALLATION OF COOKTOP
Check if the electrical installation is proper to bring the appliance in
operating condition. If electricity installation is not suitable, call an
electrician and plumber to arrange the utilities as necessary. Manufacturer
shall not be held responsible for damages caused by operations performed
by unauthorized persons.
WARNING: It is customer’s responsibility to prepare the location the
product shall be placed on and also to have the electrical installation
prepared.
WARNING: The rules in local standards about electrical installations
shall be followed during product installation.
WARNING: Check for any damage on the appliance before installing it.
Do not have the product installed if it is damaged. Damaged products
cause a risk for your safety.
Correct Place For Installation
Product is designed in
accordance with the
kitchen counters supplied
from market. A safe
distance should be left
between the product and
kitchen walls and furniture.
If hood/aspirator will be
installed over your appliance,
obey to the recommendation
of hood / aspirator
manufacturer for assembly
height. (min. 65 cm)
The gap that cooktop is to
be placed on the counter
should be cut in line with
cooktop installation dimen-
sions.
For installation of the product, the rules specied in local standards
related to electricity should be complied.
650 mm min.
16
Installation
1. Turn the cooktop down and place on smooth ground.
2. In order to prevent entrance of foreign substances and liquids
between cooktop and counter, apply the paste given in package to the
sides of lower guard of counter. For corners, curl paste and increase curls
till lling corner gaps.
3. Turn cooktop again and align with and place on counter.
4. Fasten up your cooktop on counter by using the clamp and screws
supplied.
Installation Diagram
Wick
GB
17
5. When product is mounted on a drawer, if it is possible to touch lower
side of product, this section should be separated with a wooden shelf.
6. While mounting cooktop on a closet, as shown in the gure above, in
order to separate between closet and cooktop, a shelf should be mounted.
If it is mounted on a built-in oven, there is no need to do that.
7. If your cooktop will be mounted next to right or left wall, the minimum
distance between wall and cooktop should be 50 mm.
min. 30 mm
18
Counter Cut-Off Dimensions
Pay attention to the drawings and dimensions given below while making
cooktop installation and adjusting counter cutting sizes.
Cooktop Of 30 cm
300 mm
520 mm
490 mm
270 mm
min. 60 mm
min. 60 mm
min. 60 mm
Cooktop Of 45 cm
520 mm
490 mm
440 mm
410 mm
min. 60 mm
min. 60 mm
min. 60 mm
Cooktop Of 60 cm
520 mm
490 mm
590 mm
560 mm
min. 60 mm
min. 60 mm
min. 60 mm
Cooktop Of 90 cm
520 mm
490 mm
860 mm
810 mm
min. 60 mm
min. 60 mm
min. 60 mm
Cooktop Of 100 cm
400 mm
370 mm
990 mm
960 mm
min. 60 mm
min. 60 mm
Cooktop Of 70 cm
690 mm
520 mm
560 mm
490 mm
min. 110 mm
min. 60 mm
min. 60 mm
GB
19
CONTROL PANEL
Elecrical Heater (hotplate) Cooktop Panel Visual
Cooktop Panel Visual Of 60 cm
WARNING: The control panel above is only for illustration purposes.
Consider the control panel on your device.
Warnings About Using The Touchmatic Control
1. The controls react to touching, so you do not need to apply any
pressure to the controls.
2. Use the bottom, not the tip of your nger while using the device.
3. Make sure that the touch controls are always clean and dry. Even a
thin layer of water may make it difcult for touch controls to work.
1. 180 mm electrical heater (hotplate)
2. 145 mm electrical heater (hotplate)
3. 180 mm electrical heater(hotplate)
4. 145 mm electrical heater (hotplate)
Cooktop Panel Visual Of 30 cm
1. 180 mm electrical heater (hotplate)
2. 145 mm electrical heater (hotplate)
1
2
1
2
3
4
Correct
Wrong
/