Yamaha DGX670 Portable Digital Piano Инструкция по применению

 

 







 !"#$%&'()*+,

EN

2

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste

disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or

dealer and ask for the correct method of disposal.

(weee_eu_en_02)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC require-

ments. Modifications not expressly approved by Yamaha

may void your authority, granted by the FCC, to use the

product.

2. IMPORTANT: When connecting this product to acces-

sories and/or another product use only high quality

shielded cables. Cable/s supplied with this product

MUST be used. Follow all installation instructions. Fail-

ure to follow instructions could void your FCC authoriza-

tion to use this product in the USA.

3. NOTE: This product has been tested and found to com-

ply with the requirements listed in FCC Regulations, Part

15 for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance

that your use of this product in a residential environment

will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio fre-

quencies and, if not installed and used according to the

instructions found in the users manual, may cause inter-

ference harmful to the operation of other electronic

devices. Compliance with FCC regulations does not

guarantee that interference will not occur in all installa-

tions. If this product is found to be the source of interfer-

ence, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Corporation

of America, Electronic Service Division, 6600 Orangeth-

orpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its sub-

sidiaries.

* This applies only to products distributed by Yamaha Corporation of America. (class B)

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by

Yamaha Corporation of America.

COMPLIANCE INFORMATION STATEMENT

(Supplierʼs declaration of conformity procedure)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Piano

Model Name : DGX-670

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that

may cause undesired operation.

(FCC SDoC)

3

Explanation of Graphical Symbols

The lightning flash with arrowhead

symbol within an equilateral triangle is

intended to alert the user to the presence

of uninsulated “dangerous voltage”

within the product’s enclosure that may

be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories specified by

the manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid iden-

tification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

For the AC adaptor

The name plate is located

on the bottom of the unit.

(UL60065_03)

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

DGX-670 Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the power

switch is turned off. When you are not using the instrument for a long

time, make sure to unplug the power cord from the wall AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the cord,

or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 107) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles or

glasses) containing liquids which might spill into any openings. If any

liquid such as water seeps into the instrument, turn off the power

immediately and unplug the power cord from the AC outlet. Then have

the instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item

may fall over and cause a fire.

• Radio waves may affect electro-medical devices.

- Do not use this product near medical devices or inside areas in

which the use of radio waves is restricted.

- Do not use this product within 15cm (6 in.) of persons with a heart

pacemaker or defibrillator implant.

For the AC adaptor

For the instrument

Power supply/AC adaptor

Do not open

Water warning

Fire warning

Influences on electro-medical devices

DMI-7 1/2

DGX-670 Owner’s Manual

5

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

- If any cracks or breakages exist on the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly

cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not to

be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Do not go near the instrument during an earthquake. Strong shaking

during an earthquake could cause the instrument to move or tip over,

resulting in damage to the instrument or its parts, and possibly

causing injury.

• When transporting or moving the instrument, always use two or more

people. Attempting to lift the instrument by yourself may damage your

back, result in other injury, or cause damage to the instrument itself.

• Before moving the instrument, remove all connected cables, to prevent

damage to the cables or injury to anyone who might trip over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from the

outlet. Even when the power switch is turned off, electricity is still

flowing to the product at the minimum level. When you are not using

the product for a long time, make sure to unplug the power cord from

the wall AC outlet.

• Use only the stand specified for the instrument (page 15). When

attaching it, use the provided screws only. Failure to do so could cause

damage to the internal components or result in the instrument falling

over.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for

all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels

and gradually raise the volume controls while playing the instrument to

set the desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on

the panel or keyboard. This could cause physical injury to you or

others, damage to the instrument or other property, or operational

failure.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or ringing

in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is

off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you

unplug the power cord from the wall AC outlet.

If you notice any abnormality

Power supply/AC adaptor

Location

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the instrument, or data that is lost or destroyed.

Connections

Handling caution

DMI-7 2/2

DGX-670 Owner’s Manual

6

NOTICE

To avoid the possibility of malfunction/ damage to the

product, damage to data, or damage to other property,

follow the notices below.

 Handling

• Do not connect this product to public Wi-Fi and/or Internet

directly. Only connect this product to the Internet through a

router with strong password-protections. Consult your

router manufacturer for information on security best

practices.

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

• When you use the instrument along with an app on your

smart device such as a smartphone or tablet, we recommend

that you set Wi-Fi or Bluetooth to on after enabling

“Airplane Mode” on that device in order to avoid noise

caused by communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disfiguration, damage to the internal

components or unstable operation. (Verified operating

temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft and dry/slightly

damp cloth. Do not use paint thinners, solvents, alcohol,

cleaning fluids, or chemical-impregnated wiping cloths.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the

surface of the instrument. If water is left, the wooden parts

may absorb the water and be damaged. Make sure to wipe

any water off immediately with a soft cloth.

 Saving data

• Recorded Song and edited Song/Style/Voice/MIDI setup

data, etc. are lost when you turn off the power to the

instrument. This also occurs when the power is turned off by

the Auto Power Off function (page 17). Save the data to the

instrument, or to USB flash drive (page 26).

• You can back up the data and settings of this instrument to

the USB flash drive as a backup file (page 33), as well as

restore a backup file to the instrument. To protect against

data loss due to some failure, an operation mistake, etc., save

your important data to a USB flash drive.

• To protect against data loss through USB flash drive damage,

we recommend that you save your important data onto spare

USB flash drive or an external device such as a computer as

backup data.

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio data is

strictly prohibited except for your personal use.

• This product incorporates and bundles contents in which

Yamaha owns copyrights or with respect to which Yamaha

has license to use others’ copyrights. Due to copyright laws

and other relevant laws, you are NOT allowed to distribute

media in which these contents are saved or recorded and

remain virtually the same or very similar to those in the

product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data, WAVE

data, voice recording data, a score, score data, etc.

* You are allowed to distribute medium in which your

performance or music production using these contents is

recorded, and the permission of Yamaha Corporation is

not required in such cases.

 About functions/data bundled with the

instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

• This device is capable of using various types/formats of

music data by optimizing them to the proper format music

data for use with the device in advance. As a result, this

device may not play them back precisely as their producers

or composers originally intended.

• The bitmap fonts used in this instrument have been

provided by and are the property of Ricoh Co., Ltd.

 About this manual

• The illustrations and displays as shown in this manual are

for instructional purposes only, and may appear somewhat

different from those on your instrument.

• The letters at the end of the model name (such as “B,” “WH”)

indicate the color of the instrument. Since they simply

indicate the appearance, these letters are omitted in this

manual.

• Windows is a registered trademark of Microsoft®

Corporation in the United States and other countries.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Yamaha Corporation is under license.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

DGX-670 Owner’s Manual

7

About the Manuals

This instrument has the following documents and instructional materials.

Included Documents

Owner’s Manual (this book)

Explains the basic operations and functions of this instrument. Please read this manual first.

Online Materials (Downloadable from the web)

Reference Manual (only in English, German, French and Spanish)

Explains advanced features of the instrument, not explained in the Owner’s Manual. For example, you can learn

how to create original Styles or Songs, of find detailed explanations of specific parameters.

Each chapter in this manual corresponds to the relevant chapters in the Owner's Manual.

Data List

Contains various important preset content lists such as Voices, Styles, etc., as well as MIDI-related information

of this instrument.

Smart Device Connection Manual

Explains how to connect the instrument to a smart device such as smartphone or tablet, etc.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring files

and MIDI data.

To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.

Included Accessories

 Owner’s Manual (this book)

 Online Member Product Registration

 AC adaptor*/ power cord*

 Music rest

 Footswitch

* May not be included depending on your area. Check with your Yamaha dealer.

Yam aha D ow n loa ds

https://download.yamaha.com/

DGX-670 Owner’s Manual

8

Contents

PRECAUTIONS ................................................................................................................................................... 4

NOTICE................................................................................................................................................................. 6

Information........................................................................................................................................................... 6

About the Manuals............................................................................................................................................... 7

Included Accessories............................................................................................................................................ 7

Welcome to the new DGX! 10

Panel Controls and Terminals 12

Top Panel ............................................................................................................................................................12

Rear Panel ........................................................................................................................................................... 14

Starting Up 16

Power Supply ......................................................................................................................................................16

Turning the Power On/Off ...............................................................................................................................16

Adjusting the Master Volume ..........................................................................................................................17

Making Basic Settings ........................................................................................................................................ 18

Basic Operations 19

Display-based Controls .....................................................................................................................................19

Messages Shown in the Display........................................................................................................................ 22

Calling Up the Desired Display Instantly — Direct Access .........................................................................22

Main Display Configuration.............................................................................................................................23

File Selection Display Configuration...............................................................................................................24

File Management................................................................................................................................................26

Entering Characters ...........................................................................................................................................31

Data Backup ........................................................................................................................................................33

Resetting to the Factory-programmed Settings (Initializing) ......................................................................34

1 Piano Room – Enjoying the Piano Performance – 35

Playing a Piano Performance in the Piano Room..........................................................................................35

Making the Detailed Settings in the Piano Room..........................................................................................36

Recording your Performance in the Piano Room .........................................................................................37

2 Voices – Playing the keyboard with various sounds – 38

Playing Preset Voices .........................................................................................................................................38

Calling up the Appropriate Settings for Piano Performance (Piano Reset)...............................................41

Playing Realistic Resonance-enhanced Piano Sounds (VRM Voices)........................................................41

Playing Super Articulation Voices ...................................................................................................................42

Setting the Touch Response of the Keyboard.................................................................................................43

Using the Metronome........................................................................................................................................44

Changing the Pitch of the Keyboard ...............................................................................................................44

Applying Voice Effects ......................................................................................................................................45

3 Styles – Playing Rhythm and Accompaniment – 48

Playing a Style with the Auto Accompaniment .............................................................................................48

Operating Style Playback................................................................................................................................... 50

DGX-670 Owner’s Manual

9

Playing in Unison or Adding Accents to Style Playback (Unison & Accent)............................................ 54

Changing the Chord Fingering Type...............................................................................................................56

Changing the Split Points..................................................................................................................................58

4 Songs – Playing, Practicing and Recording Songs – 60

Playback of Songs ...............................................................................................................................................60

Displaying Music Notation (Score) .................................................................................................................63

Displaying Lyrics ................................................................................................................................................64

Turning Each Channel of the Song On/Off....................................................................................................65

One-handed Practice with the Guide Function .............................................................................................65

Repeat Playback..................................................................................................................................................67

Recording Your Performance...........................................................................................................................68

5 USB Audio Player/Recorder – Playback and Recording Audio Files – 72

Playing Back Audio Files (USB Audio Player)............................................................................................... 72

Recording Your Performance as Audio (USB Audio Recorder) .................................................................75

6 Microphone – Connecting a Microphone and Singing Along with Your Performance – 77

Connecting a Microphone ................................................................................................................................77

Using the Talk Function....................................................................................................................................78

7 Registration Memory/Playlist – Saving and Recalling Custom Panel Setups – 80

Saving and Recalling Custom Panel Setups with Registration Memory .................................................... 81

Using Playlists to Manage a Large Repertoire of Panel Setups ....................................................................84

8 Mixer – Editing the Volume and Tonal Balance – 88

Basic Procedure ..................................................................................................................................................88

9 Connections – Using Your Instrument with Other Devices – 91

Connecting USB Devices ([USB TO DEVICE] terminal)............................................................................ 91

Connecting to a Computer ([USB TO HOST] terminal) .............................................................................92

Connecting to a Smart Device ([AUX IN] jack/Bluetooth/[USB TO HOST] terminal/Wireless LAN) ...94

Listening to Audio Playback by an External Device through the Instrument’s Speaker

([AUX IN] jack/Bluetooth/[USB TO HOST] terminal) ...............................................................................95

Connecting Headphones or an External Speaker ([PHONES/OUTPUT] jack).......................................98

Connecting a Microphone ([MIC INPUT] jack)...........................................................................................98

Connecting a Foot Pedal ([AUX PEDAL] jack).............................................................................................99

Connecting a Pedal Unit ([PEDAL UNIT] jack)...........................................................................................99

10 Menu – Making Global Settings and Using Advanced Features – 100

Basic Procedure ................................................................................................................................................100

Function List .....................................................................................................................................................101

Troubleshooting 103

Specifications 106

Compatible Format..........................................................................................................................................108

Index 109

DGX-670 Owner’s Manual

10

Welcome to the new DGX!

The DGX-670 is equipped with a color display and has many advanced features that enhance your musical enjoyment

and expand your creative and performance possibilities. Let’s take a look…

This instrument features gorgeous piano Voices, created with samples of

the Yamaha CFX flagship concert grand piano. This instrument also

features VRM which accurately recreates the acoustic resonance of a

grand piano, which changes subtly by the timing and strength of the

player's touch and pedal operation. This enables expression of even the

most delicate performance nuances and responds minutely to your pedal

use and key playing. The Piano Room features provide even greater

piano performance enjoyment. Piano Room lets you select the desired

piano type as well as different room ambiences—enabling a complete,

realistic piano experience, as if you were playing an actual piano.

Page 35

Naturally, this instrument provides many realistic piano Voices for your playing enjoyment. But it also features a wide

variety of authentic instruments, both acoustic and electronic, including organ, guitar, sax, and others used in many

music genres—letting you convincingly perform in any desired music style. Moreover, the special Super Articulation

Voices realistically recreate many of the performance techniques and characteristic sounds generated when an artist

plays an instrument. The result is superbly detailed expression—such as the realistic sound of finger slides on guitar,

and the expressive breath noises of saxophone and other wind instruments.

Page 38

Full Backing Band Accompaniment

Even if you’re playing alone, the DGX can put an entire

backing band behind you! By simply playing the keyboard,

chords are automatically detected and they trigger the auto

accompaniment backing (Style function). Select an

accompaniment Style—such as pop, jazz, Latin, and various

other music genres in the world—and let the DGX be your complete backing band! You can change arrangements on

the fly, instantly selecting different rhythm variations and breaks in real time, including Intro, Ending, and Fill-in,

during your performance.

Page 48

Audio files (WAV format) saved to a USB flash drive can be played back on the instrument.

You can also record your performance as audio files (WAV format) to a USB flash drive—

making it easy to edit your recordings on computer as desired, and share them over the

Internet.

Page 72

Authentic piano sound

Performing in various music genres

Audio playing and recording

DGX-670 Owner’s Manual

11

Welcome to the new DGX!

The Lesson features are a fun way to learn and master Songs, with

notation shown on the display. For example, when you practice the

right-hand part, the playback of the left part and other parts will wait

for you to play the notes correctly. This allows you to practice melodies

and phrases smoothly—even if you are a beginner.

Page 65

Since a microphone can be connected to this instrument and Song

lyrics can be shown on the display, you can enjoy singing along with

your keyboard performance or along with Song playback. Moreover,

you can apply various effects such as chorus to your singing voice. You

can also cancel the vocal part on audio recordings, letting you sing

along with (or instead of!) your favorite artists and groups, and enjoy

performing even more.

Page 77

The audio data in a Bluetooth-equipped device such as a smartphone

can be played back through the DGX-670’s built-in speakers. You can

enjoy playing or singing along with the audio data, or simply listening to

your favorite music.

Page 96

*Depending on the country in which you purchased the product, the instrument may not have Bluetooth capability.

Lesson features with Score display

Sing along with Song playback or your own performance

Playing back the audio data wirelessly—Bluetooth Audio function

Want to learn more about the DGX-670’s

features?

Press the [DEMO] button and start the

demonstration!

To stop the demonstration, press the [EXIT] button

located at right of the display.

DGX-670 Owner’s Manual

12

Panel Controls and Terminals

Top Panel

[ ] (Standby/On) switch .................. page 16

Turns on the instrument’s power or sets to standby.

[MASTER VOLUME] dial ................. page 17

Adjusts the overall volume.

[DEMO] button.................................. page 11

Plays the Demos.

SONG related buttons........................ page 60

For selecting Songs and controlling Song playback.

STYLE category selection buttons..... page 48

For selecting a Style category.

[DIRECT ACCESS] button................ page 22

Instantly calls up the desired display with just a

single additional button press.

[METRONOME] button .................... page 44

Turns the metronome on or off.

[TEMPO/TAP] button ....................... page 52

Controls the tempo for Style, Song and Metronome

playback.

TRANSPOSE [-]/[+] buttons ............ page 44

Transposes the entire pitch of the instrument in

semitone steps.

[CHANNEL ON/OFF] button .... pages 53, 65

Calls up settings for turning Style/Song channels on

or off.

[MIXER/EQ] button .......................... page 88

Calls up various settings for the keyboard, Style and

Song parts.

[OTS LINK] button ........................... page 52

Turns on/off the OTS Link function.

STYLE CONTROL buttons ............... page 48

Controls Style playback.

LCD and related controls .................. page 19

Indicates the current panel settings and allows you

to select or change the settings.

[MENU] button................................ page 100

Lets you make advanced settings and create your

original Styles and Songs.

PITCH BEND

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3

If your instrument is equipped with

Bluetooth functionality (page 96), the

Bluetooth logo is printed on the panel

button. Depending on the country in which you

purchased the product, the instrument may not have

Bluetooth capability.

DGX-670 Owner’s Manual

13

Panel Controls and Terminals

[PLAYLIST] button............................ page 80

Calls up the Playlist display in which you can

manage your repertoire.

[MIC SETTING] button .................... page 77

Calls up the display from which you can make

settings for the microphone.

[USB AUDIO] button ............................ page 72

Calls up the display for playing back audio files in

the connected USB flash drive and recording your

performance to the USB flash drive in audio format.

VOICE category selection buttons .... page 38

For selecting a Voice category.

[VOICE EFFECT] button .................. page 45

Applies various effects to the keyboard

performance.

PART ON/OFF buttons...................... page 38

Turns the keyboard part on or off.

[PIANO ROOM] button .................... page 35

Instantly calls up the optimum piano-related

settings for playing the instrument simply as a

piano.

REGISTRATION MEMORY buttons... page 80

Registers and recalls panel setups.

[USB TO DEVICE] terminal ............. page 91

For connecting a USB flash drive or USB wireless

LAN adaptor.

[PITCH BEND] wheel ....................... page 45

Bends the pitch of the keyboard played sound up or

down.

F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

Panel Setup (Panel Settings)

By using the controls on the panel, you can make

various settings as described here. These settings of

the instrument are together referred to as “panel

setup” or “panel settings” in this manual.

DGX-670 Owner’s Manual

14

Rear Panel

[USB TO HOST] terminal ................. page 92

For connecting to a computer or smart device such

as smartphone or tablet.

[AUX PEDAL] jack ......................... see below

For connecting the included footswitch or

separately sold foot pedals.

[PEDAL UNIT] jack........................... page 15

For connecting a separately sold pedal unit.

[MIC INPUT] jack ............................. page 77

For connecting a microphone.

[AUX IN] jack .................................... page 95

For connecting an external audio device, such as a

portable audio player.

[PHONES/OUTPUT] jack................. page 98

For connecting headphones or an external devices,

such as speakers.

DC IN jack ......................................... page 16

For connecting the AC adaptor.

Attaching the Music Rest

Insert the music rest into the slots as shown.

Connecting a Footswitch

Connect the included footswich to the [AUX PEDAL]

jack. Other separately sold foot pedals (FC3A, FC4A or

FC5) can also be connected to this jack.

By default, the sustain function is assigned.

NOTE

• Make sure that the power is off when connecting or

disconnecting the footswitch.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch,

resulting in reversed operation.

CAUTION

Before connecting the instrument to other electronic

components, turn off the power of all the components.

Also, before turning any components on or off, make

sure to set all volume levels to minimum (0). Otherwise,

damage to the components, electrical shock, or even

permanent hearing loss may occur.

Assigning a function to each pedal

Various functions can be assigned to each pedal

connected to the [AUX PEDAL] jack or the [PEDAL

UNIT] jack — including start/stop of Song playback

and controlling Super Articulation Voices.

These can be set on the Pedal tab of the Controller

display called up via the [MENU] button (page 100).

DGX-670 Owner’s Manual

15

Panel Controls and Terminals

Using a Keyboard Stand and Pedal Unit

(Sold Separately)

A separately sold LP-1B/LP-1WH pedal unit can be

connected to the [PEDAL UNIT] jack. When

connecting the pedal unit, make sure to also assemble

the unit on the separately sold L-300B/L-300WH

keyboard stand. The L-300B/L-300WH keyboard stand

is designed to be used for multiple models. When

assembling the keyboard stand for the DGX-670, make

sure to use the screw holes indicated by “B” on the metal

brackets of the stand. For details, refer to the assembly

manual of the stand.

NOTE

• Make sure that the power is off when connecting or

disconnecting the pedal unit.

• Do not press the pedals while turning the power on. Doing this

changes the recognized polarity of the pedals, resulting in

reversed operation.

Pedal Unit Functions

By default, the following functions are assigned to each

pedal.

 Damper Pedal (Right)

Pressing this pedal will sustain notes longer. Releasing

this pedal immediately stops (damps) any sustained

notes.

When you select a VRM Voice (page 41), pressing this

pedal activates the VRM to accurately recreate the

unique resonance of an acoustic grand piano’s

soundboard and strings.

 Sostenuto Pedal (Center)

If you play a note or notes on the keyboard and press the

sostenuto pedal while the note(s) are held, those notes

will sustain as long as you hold the pedal (as if the

damper pedal had been pressed) but all subsequently

played notes will not be sustained. This makes it

possible to sustain a note or notes, for example, while

other notes are played “staccato.”

 Soft Pedal (Left)

The soft pedal reduces the volume and slightly changes

the timbre of notes played while the pedal is pressed.

The soft pedal will not affect notes that are already

playing when it is pressed.

Half Pedal function (for FC3A and LP-1B/

LP-1WH)

The FC3A and the right pedal of the LP-1B/

LP-1WH have a Half Pedal function which allows

you to use half-damper techniques, in which the

damper is pressed somewhere between all the way

down and all the way up. In this half-damper state

(on a real piano), the damper felts only partially

mute the strings. The Half Pedal function lets you

delicately and expressively control the damper

muting, and create subtle nuances in your

performance, by finely controlling the point at

which pressure on the pedal affects the damper

muting. The point is called “Half Pedal Point” and

can be set on the Pedal tab of the Controller display

called up via the [MENU] button (page 100).

LP-1B/LP-1WH

(Sold separately)

L-300B/L-300WH

(Sold separately)

Rear side

If you press and hold the damper pedal here,

all the notes shown will be sustained.

If you press and hold the sostenuto pedal here,

only the notes held at this timing will be

sustained.

DGX-670 Owner’s Manual

16

Starting Up

Connect the plugs of the AC adaptor in the order shown in the illustration.

WARNING

Use the specified AC adaptor (page 107) only. Using the wrong AC adaptor can result in damage to the instrument or

overheating.

CAUTION

When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or

malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.

NOTE

When disconnecting the power cord, first turn off the power, and then follow this procedure in reverse order.

1 Turn down the [MASTER VOLUME] dial to “MIN.”

2 Press the [ ] (Standby/On) switch to turn the power on.

After the Main display appears, adjust the volume as desired while playing the keyboard.

NOTICE

Do not attempt any other operations, such as pressing keys, buttons or pedals. Doing so may cause the instrument

to malfunction.

3 After you finish using the instrument, turn off the power by pressing the

[ ] (Standby/On) switch for about a second.

Power Supply

Turning the Power On/Off

AC outlet

AC adaptor

DC IN jack (page 14)

DC plug

Power cord

AC plug

The shape of the plug and outlet differ depending on the locale.

1

2

DGX-670 Owner’s Manual

17

Starting Up

CAUTION

Even when the [ ] (Standby/On) switch is in standby status, electricity is still flowing to the instrument at the

minimum level. Remove the electric plug from the outlet when the instrument is not to be used for extended

periods of time, or during electrical storms.

NOTICE

While recording or editing, or while a message is displayed, the power cannot be turned off even if you press the

[ ] (Standby/On) switch. If you want to turn off the power, press the [ ] (Standby/On) switch after recording, editing, or

after the message has disappeared. If you need to force-quit the instrument, hold down the [ ] (Standby/On) switch for

longer than three seconds. Note that the force-quit operation might cause data loss and damage to the instrument.

Setting the Auto Power Off function

To prevent unnecessary power consumption, this instrument features an Auto Power Off function that

automatically turns the power off if the instrument is not operated for a specified period of time. The

amount of time that elapses before the power is automatically turned off is 30 minutes by default; however,

you can change the setting. For details, refer to page 18.

NOTICE

Any data which is not saved via the Save operation will be lost if the power automatically turns off. Make sure to save your data

before this happens.

 Disabling Auto Power Off (simple method)

Turn the power on while holding down the lowest key on the keyboard. A message appears briefly, then the instrument

starts up with the Auto Power Off function disabled.

To adjust the volume of the entire keyboard sound, use the [MASTER VOLUME] dial while playing the

keyboard.

CAUTION

Do not use the instrument for a long period of time at a high or uncomfortable volume level, since this can cause

permanent hearing loss.

Intelligent Acoustic Control (IAC)

IAC is a function which automatically adjusts and controls the sound quality according to the overall

volume of the instrument. Even when the volume is low, it permits both low sounds and high sounds to be

clearly heard. IAC Control affects only the sound output of the instrument speakers. You can turn the IAC

function on or off, and set the depth, although the default setting for this function is on. This can be set on

the Config1 tab in the Utility display called up via the [MENU] button (page 100).

Adjusting the Master Volume

+

A-1

DGX-670 Owner’s Manual

18

As necessary, make basic settings for the instrument, such as the language shown on the display.

1 Call up the operation display.

1-1

Press the [MENU] button to call up the Menu display.

1-2 Use the Cursor buttons [ ][ ][ ][ ] to select System, and then press the [ENTER]

button.

1-3 Press the TAB [ ] button to select the Common tab.

2 Use the [1 ] – [8 ] buttons to make the necessary settings.

To return to the previous display, press the [EXIT] button.

Making Basic Settings

[1 ]/

[2

]

Auto Power Off Determines the amount of time that elapses before the power is

automatically turned off by the Auto Power Off function (page 17).

To disable Auto Power Off, select Disabled here.

[3 ]/

[4 ]

Language Determines the language (English, German, French, Spanish and

Italian are available) used in the display for messages.

[5 ]/

[6 ]

Owner Name Lets you input your name which appears in the opening display

(called up when the power is turned on). For instructions on

entering characters, refer to page 31.

[7 ]/

[8

]

Ve r s i on Calls up the firmware version of this instrument.

1-2

1-3

1-1

2

DGX-670 Owner’s Manual

19

Basic Operations

The LCD provides comprehensive at-a-glance information on all current settings. The displayed menu or

parameters can be selected or changed by the controls around the LCD.

Cursor buttons [ ][ ][ ][ ] and [ENTER] button

These buttons are used to move the on-screen cursor. In this manual, the upper and lower buttons are

described as [

] [ ] and the left and right buttons as [ ] [ ]. There are two types of display. One is the

type in which the item is selected (and called up) only by moving the cursor, and the other is the type in

which you need to press the [ENTER] button after moving the cursor to actually call up the item.

 Example 1

 Example 2

Display-based Controls

TAB [ ][ ] buttons

(page 21)

Data dial (page 20)

Cursor buttons

[ ][ ][ ][ ] and

[ENTER] button (see

below)

[1 ] – [8 ] buttons (page 20)

[EXIT] button

(page 21)

In the File Selection display (page 24),

use the Cursor buttons to select and

call up the file.

In the Menu display (page 100) and

other setting displays, use the Cursor

buttons to move the cursor, and then

press the [ENTER] button to actually

select the item.

DGX-670 Owner’s Manual

20

[1 ] – [8 ] buttons

The [1 ] – [8 ] buttons are used to make selections or adjust settings (up or down correspondingly)

for functions shown directly above them. In this manual, the upper buttons are described as [

] and the

lower buttons as [

].

When setting parameters, you can reset the parameter to the default value by pressing both [

] and [ ]

buttons of the same number simultaneously.

Data dial

Depending on the selected display, the Data dial can be used in the following two ways.

 Adjusting parameter values

You can conveniently use the Data dial in tandem with the [1 ] – [8 ] buttons to adjust parameters

indicated in the display.

This convenient technique also works well with pop-up parameters such as Tempo and Transpose. Simply

press the appropriate button (ex., [TEMPO/TAP]), and then rotate the Data dial to set the value.

For menus that appear in this section of the display,

use the [1 ] – [8 ] (upper) buttons.

For menus that appear in this section of the display,

use the [1 ] – [8 ] (lower) buttons.

For list menus that appear, use the [1 ] – [8 ]

buttons to select the desired item.

For parameters that appear in slider (or knob) form,

use the [1 ] – [8 ] buttons to adjust the value.

Select the desired parameter with the appropriate

[1 ] – [8 ] buttons.

Rotate the Data dial to adjust

the selected parameter.

Страница загружается ...

Yamaha DGX670 Portable Digital Piano Инструкция по применению

Это руководство также подходит для

Yamaha DGX670 Portable Digital Piano Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов