Yamaha DV-S5450 Инструкция по применению

Категория
Проигрыватели DVD
Тип
Инструкция по применению

Это руководство также подходит для

UA
POWER
NATURAL SOUND DVD PLAYER
STANDBY
PLAY
STOPPAUSE
DVD / VIDEO CD / CD
CLOSE
OPEN
TruSurround
by
SRS
DVD / VIDEO CD / CD PLAYER
LECTEUR DE DVD
DV-S5450
OWNER’S MANUAL
MODE D’EMPLOI
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make
any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure.
The set complies with the FCC-Rules, Part 15 and
with 21 CFR 1040.10.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings.
Install in accordance with the manufacturers
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug. A polarized plug
has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are
provided for your safety.When the provided plug does not
fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10.Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer or sold
with the apparatus.When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as if the power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, or when the apparatus has been
exposed to rain or moisture, does not operate normally, or
has been dropped.
15. Battery usage CAUTION To prevent battery leakage
which may result in bodily injury or damage to the unit:
Install all batteries correctly, + and - as marked on the unit.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Remove batteries when the unit is not used for a long time.
EL 6475-E002: 01/3
IMPORTANT SAFETY INSTRUCTIONS
AC Polarized
Plug
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the
USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used accord-
ing to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference,
which can be determined by turning the product "OFF" and "ON", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial
type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you
can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6600 Orangethorpe Ave. Buena Park, CA90622.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic
Industries Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
For Customer Use:
Read carefully the information located at the rear panel of the player
and enter below the Serial No. Retain this information for future refer-
ence.
Model No.
Serial No. __________________________
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide slot and
fully insert.
This Class B digital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
DANGER -
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
(Australia model)
CAUTION -
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
DANGER -
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM.
U.S.A. and Canada models
Australia model
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
LASER
Type Semiconductor laser GaAlAs
Wave length 650 nm (DVD)
780 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
NOTE:
Pictures shown maybe different between countries.
Never make or change connections with the power switched on.
When playing DTS encoded CDs, excessive noise will be heard from
the analog stereo outputs. To avoid possible damage to the audio sys-
tem, the consumer should take proper precautions when the analog
stereo outputs of the player are connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1-channel
DTS Digital Surround™ decoder system must be connected to the digi-
tal output of the player.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this unit in a well ventilated, cool, dry, and
clean place with at least 2.5 cm (1 inch) above,
behind and on the both sides of this unit - away
from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold.
3 Position this unit away from other electrical appli-
ances, motors and transformers to avoid humming
sounds, do not place this unit where it may get
exposed to rain or any kind of liquid to prevent fire
or electrical shock.
4 Avoid extreme temperature swings or excessive use
of humidifier in the room where this unit is installed
to prevent condensation inside this unit, which may
cause an electrical shock, fire, damage to this unit,
and/or personal injury.
5 Do not cover this unit with a newspaper, a table-
cloth, a curtain, etc. in order not to obstruct heat
radiation. If the temperature inside this unit rises, it
may cause fire, damage to this unit and/or personal
injury.
6 Avoid installing is unit in a place where foreign
objects and liquid might fall. It might cause a fire,
damage to this unit and/or personal injury. Do not
place the following objects on this unit:
Other components, as they may cause damage
and/or discoloration on the surface of this unit.
Burning objects (i.e., candles), as they may cause
fire, damage to this unit and/or personal injury.
Containers with liquid in them, as they may cause
an electrical shock to the user and/or damage to
this unit.
7 Do not operate this unit upside-down. It may over-
heat, possibly causing damage.
8 Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting
them.
9 Only voltage specified on this unit must be used.
Using this unit with a higher voltage than specified
is dangerous and may result in fire or other acci-
dents. YAMAHA will not be held responsible for any
damage resulting from the use of this unit with a
voltage other than that specified.
10 Do not attempt to clean this unit with chemical sol-
vents; this might damage the finish. Use a clean,
dry cloth.
11 Disconnect the power cord from the wall outlet when
not planning to use this unit for a long period of
time, or during an electrical storm, as they may
cause damage by lightning.
12 Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any ser-
vice is needed. Cabinet should never be opened for
any reasons.
13 Be sure to read ‘TROUBLESHOOTING’ section
regarding common operating errors before conclud-
ing that this unit is faulty.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only a qualified
service person should remove the cover or attempt to service this
device.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER
COVERSHIELD OR THE BACKPLATE OF SET)
1
English
Contents
CONTENTS
TruSurround and the SRS symbol are trademarks of SRS Labs., Inc.
TruSurround technology is incorporated under license from SRS
Labs., Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and
the double-D symbol are trademarks of Dolby Laboratories.
”DTS” and ”DTS Digital Surround” are trademarks of Digital Theater
Systems, Inc.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Introduction...................................... 2
DVD Video Introduction ................................................... 2
Unpacking............................................................................. 2
Remote Control Battery Installation ............................. 2
Environmental Information............................................... 2
Cleaning Discs ..................................................................... 2
Functional Overview ...................... 3
Front and Rear Panels ....................................................... 3
Remote Control ................................................................. 4
Preparation....................................... 5
General Notes .................................................................... 5
Digital Connections ........................................................... 5
Analog Connections ......................................................... 5
Video Connections ............................................................ 5
NTSC/PAL Settings ............................................................ 6
NTSC/PAL Conversion ..................................................... 6
General Explanation........................................................... 7
Menu Bar/Status Window ................................................. 7
Temporary Feedback Field Icons .................................... 7
Personal Preferences ......................................................... 8
Operation........................................ 10
Loading Discs .................................................................... 10
Playing a DVD Video and Video CD ............................. 10
General Features .............................................................. 10
Special DVD Features ...................................................... 12
Special Video CD & SVCD Features ............................ 13
Playing an Audio CD ........................................................ 13
Favorite Track Selection (FTS) Program ...................... 13
MP3 Disc Features ........................................................... 14
Access Control............................... 15
Deciding the PIN number............................................... 15
Access Control: Child Lock
(DVD Video and Video CD) ....................................... 15
Access Control: Parental Control
(DVD Video only) ......................................................... 15
Before Requesting Service.......... 17
Specifications ................................. 18
2
Introduction
DVD Video Introduction
The player will play digital video discs conforming to the
universal DVD Video standard. The unique features on
DVD Video, such as selection of sound track, subtitle
languages and different camera angles (again depending on
the disc), are all supported.
In addition to DVD Video discs, you will be able to play all
Video CDs and Audio CDs.
DVD Video
You will recognize DVD Video discs by the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.) the disc may have one or more Titles.
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
DVD-VIDEO DISC
The region code is 1 for U.S.A and
Canada models, 4 for the Australia
model
Since it is usual for DVD movies to be
released at different times in different regions of the world, all
players have region codes and discs can have an optional region
code. If you load a disc of a different region code to the player, you
will see the region code notice on the screen. The disc will not
play and should be unloaded.
Video CD
You will recognize Video CDs by the logo
shown.
Super Video CD (SVCD)
SVCDs are based on the Super VCD IO Standard, referring
to the Standard of Electronics Industry of the People’s
Republic of China.
Audio CD
Audio CDs contain music tracks only.
You will recognize Audio CDs by the logo
shown.
MP3 (MPEG Audio Layer 3)
The player supports the MP3 format which contains
compressed music tracks.
Notes:
CD-R and CD-RW cannot be played unless finalized.
Some discs cannot be played depending on the disc
characteristics or recording conditions.
Unpacking
First check and identify the contents of the player package.
You should have the following items.
The player
Remote Control with batteries
Audio cable
Video cable
Owner’s Manual
If any item is damaged or missing, contact your retailer.
Keep the packaging material for future transportation.
Remote Control Battery
Installation
Insert batteries as indicated inside the battery
compartment.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.).
+
-
+
-
Environmental Information
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out, in a straight line.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
discs.
INTRODUCTION
1 4
3
English
Functional Overview
FUNCTIONAL OVERVIEW
Front and Rear Panels
POWER
NATURAL SOUND DVD PLAYER
STANDBY
PLAY
STOPPAUSE
DVD / VIDEO CD / CD
CLOSE
OPEN
TruSurround
by
SRS
POWER
– switches the player to on or off
STANDBY indicator
– lights red when the player is in Stand-by mode
DISPLAY
– shows the current status of the player
R/T
– search forward* / go to the next
chapter or track
B PLAY
– starts playback
S/Q
– search backward* / go to a previous
chapter or track
Disc Tray
/ OPEN/CLOSE
– opens/closes the disc tray
; PAUSE
– interrupts playback
9 STOP
– stops playback
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
COAXIAL SUBWOOFER VIDEO
COMPONENT VIDEO
2
1
2
1
P
R
P
B
Y
PCM DIGITAL
DTS MPEG
OPTICAL
AUDIO OUT
VIDEO OUT
R
L
S VIDEO
AC Power cord
– connect to power source
COAXIAL (AUDIO OUT)
– connect to digital (coaxial) audio equipment
OPTICAL (AUDIO OUT)
– connect to digital (optical) audio equipment
SUBWOOFER (AUDIO OUT)
– connect to an active subwoofer
S VIDEO (VIDEO OUT)
– connect to a TV with S-Video (Y/C) inputs
COMPONENT VIDEO PR/PB/Y
(VIDEO OUT)
– connect to a TV with PR/CR PB/CB Y inputs
VIDEO 1/2 (VIDEO OUT)
– connect to a TV with CVBS video inputs
Right/Left (AUDIO OUT)
– connect to an amplifier, receiver or stereo
system
* Press and hold button for about two seconds
4
FUNCTIONAL OVERVIEW
1 2 3
4 5 6
7 8 9
POWER
RETURN/RESUME BIT RATE
ON SCREEN
AUDIOZOOMANGLE
SUBTITLE
REPEAT —
A–B
SHUFFLE
SCAN
DVD
MENU
ENTER
OK
STOP PLAY PAUSE
RETURN / RESUME
– go back to previous menu / to
continue playback after play
was stopped
MENU
– access menu of a DVD disc
1 2 3 4 cursor buttons
– (left/right/up/down) select an
item in the menu
ENTER/OK
– acknowledge menu selection
S
– search backward* / go to a
previous chapter or track
STOP ( 9 )
– stops playback
PLAY ( B )
– starts playback
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
REPEAT
– repeat chapter, track, title, disc
A-B
– repeat a specific segment
SHUFFLE
– play tracks in random order
SCAN
– play the first 10 seconds of
each track/chapter within a disc
POWER (B/
|
)
– switches DVD ON or to
standby-on mode
numeric buttons (0-9)
– select numbered items in a
menu
BIT RATE
– display bit rate indicator during
playback
ON SCREEN
– access or remove the player’s
menu
T
– search forward* / go to the next
chapter or track
SUBTITLE
– select a subtitle language
ANGLE
– select a DVD camera angle
ZOOM
– enlarge video image
AUDIO
– select an audio format and
language
* Press and hold button for about two seconds
Remote Control
5
English
Preparation
General Notes
Depending on the equipment you wish to connect, there
are various ways you could connect the player. Possible
connections are shown in the following drawings.
Please refer to the manuals of other equipment as
necessary to make the best connections.
Do not connect the player via your VCR. The video quality
could be distorted by the copy protection system.
Do not connect the player’s audio out jack to the phono in
jack of your audio system.
Digital Connections
The player has COAXIAL and OPTICAL digital out jacks.
Connect one or both of them to your AV receiver
equipped with Dolby digital, DTS, or MPEG decoder using
each specific cable (separate purchase).
COAXIAL S
U
PCM DIGITAL
DTS MPEG
OPTICAL
A
AV receiver
Left main
speaker
Left rear
speaker
Center speaker
Right main
speaker
Subwoofer
Right rear
speaker
COAXIAL
IN
OPTICAL
IN
C
O
You will need to activate the player’s digital
output (see ‘Personal Preferences’).
Note:
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make sure to select the
appropriate audio format at menu screen included on the disc.
Pressing AUDIO once or more may change not only audio
languages but also audio formats, and the selected format
appears for several seconds on the status window.
Analog Connections
Use RCA audio cable supplied with the player to connect
AUDIO OUT L (left) and R (right) jacks of the player to
corresponding input jacks of your audio equipment such as
Stereo amplifier. You can connect a subwoofer to the
player’s SUBWOOFER (AUDIO OUT) jack.
COAXIAL SUBWOOFER VIDEO
2
1
PCM DIGITAL
DTS MPEG
OPTICAL
AUDIO OUT
R
L
1 CD/DVD
RL
L
R
R
L
Stereo
amprifier
Subwoofer
(supplied)
Video Connections
If your AV receiver has video output jacks, connect your
receiver (and then to your TV) so that you can use one TV
for several different video sources (LD, VCR etc.) by simply
switching the input source selector of your receiver.
The player has three types of video output jacks. Use one
of them in accordance with the input jacks of the
equipment to be connected.
O
FER VIDEO
COMPONENT VIDEO
2
1
2
1
P
R
P
B
Y
OUT
VIDEO OUT
R
L
S VIDEO
VIDEO
OUT
VIDEO
IN
COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN
S VIDEO
OUT
S VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
YP
B
C
B
P
R
C
R
V
S
<A> <B><C>
AV receiver
(supplied)
PREPARATION
6
Component Video terminal <A>
Component video connection achieves high fidelity in
reproducing colors (better performance than S-video
connection), separating video signal into luminance (Y,
terminal color-coded as green), and color difference (PB,
blue/PR, red). Use commercially available coaxial cables.
Receiver (and TV) with component input is required.
Observe the color of each jack when connecting. If your
receiver does not have component output jacks, connecting
the player’s component output directly to your TV’s
component input can reproduce better video image.
Note:
Do not connect the player’s COMPONENT VIDEO OUT
jacks to component video input jacks special for HD (High-
Definition) TV.
S-Video terminal <B>
S (separate) video connection achieves a clearer picture
than composite video connection by separating color and
luminance when transmitting signals. Use commercially
available S-video cable. Receiver (and TV) with
S-video input is required.
Composite Video terminal (1, 2) <C>
Use RCA video cable supplied with the player when
connecting the player to a TV.
VIDEO 1, 2 jacks of VIDEO OUT output the same signal.
You can connect one to your receiver’s input using supplied
RCA cable, and the other to another receiver or a TV.
NTSC/PAL Settings
You can switch the NTSC/PAL setting of the player to
match the video signal of your TV. This setting only affects
the television’s on-screen display that shows the stop and
setup modes. You may select either NTSC or PAL. To
change the player setting to PAL or NTSC, follow the steps
below.
1 Press the POWER button on the front panel of the player
to turn off the player.
2 Press and hold 9 and T on the front of the player. While
holding 9 and T, press POWER.
3 After PAL or NTSC appears on the player display, release 9
and T at the same time. The PAL or NTSC indicator
that appears on the player display indicates the current
setting.
4 To change the setting, press T within three seconds. The
new setting (PAL or NTSC) will appear on the player
display.
NTSC/PAL Conversion
The player is equipped with a NTSC/PAL conversion
feature to convert the video output of the disc to match
your TV system. The conversions supported are as below:
NTSC
PAL60
NTSC
Not
Supported
PAL
PAL
NTSC
PAL60
NTSC
NTSC
PAL
PAL
Disc
Output format
Type
DVD
VCD
NTSC
Format
Selected mode
PAL
NTSC
PAL
NTSC
PAL
AUTO
Select among NTSC, PAL and AUTO.
See ‘Personal Preferences’ for operational procedure.
Notes:
AUTO can only be selected when using a TV that has both
the NTSC and PAL systems.
Slight picture distortions may occur due to this conversion.
This is normal. Thus, the AUTO format is most suitable for the
best picture quality.
PREPARATION
7
English
General Explanation
About this manual
This manual gives the basic instructions for operating the
player. Some DVDs require specific operation or allow only
limited operation during playback. When this occurs, the
symbol Ä appears on the screen, indicating that the
operation is not permitted by the player or the disc.
Remote control operation
Unless stated, all operations can be performed by the
remote control. Always point the remote control directly at
the player, making sure there are no obstructions between
the remote and the player.
Corresponding buttons on the front panel of the player can
also be used.
Menu bar operation
A number of operations can be done with the menu bar
on the screen. The menu bar can be accessed by pressing
the cursor buttons on the remote control.
Pressing ON SCREEN while the menu bar is displayed will
clear the menu bar from the screen.
The selected item will be highlighted, and the appropriate
cursor buttons to operate it will be displayed below the
icon.
The symbols < or > indicate more items are available at
the left/right of the menu bar. Press 1 or 2 to select these
items.
Menu Bar/Status Window
As there are multiple menu bars, the items on the menu
bar are arranged according to usage and availability of
direct access buttons. Pressing the ON SCREEN buttons
repeatedly will toggle through menu bar 1, menu bar 2,
menu bar 3 and OFF.
Menu bar 1
User Preference Settings
Current Subtitle Language
Current Audio Language
Smart Color
Sound mode
Menu bar 2
Frame by Frame
Slow Motion
Scan Speeds
Camera Angle
Enlarge Picture
Menu bar 3
Title
Chapter
Time Search
Favorite Track Selection
Temporary Feedback Field
Icons
Scan
Repeat All
Repeat Title
Repeat Track
Repeat Chapter
Shuffle
Shuffle Repeat
Repeat A to end
Repeat A-B
Angle
Child Lock On
Child Safe
Resume
Action prohibited
PREPARATION
8
Personal Preferences
You can set your own personal preferences on the player.
General operation:
Press ON SCREEN on the remote control.
Select
in the menu bar and press 4.
The Personal Preferences menu appears.
Use the 1 2 3 4 buttons to toggle through the menus,
submenus and submenu options.
When a menu item is selected, the cursor buttons (on
the remote control) to operate the item are displayed next
to the item.
Press ENTER/OK to confirm and return to the main menu.
The following items can be adapted:
Picture
TV Shape
If you have a wide screen (16:9) TV, select 16:9.
If you have a regular (4:3) TV, select 4:3.
If you have a 4:3 TV, you can also select between:
Letterbox for a ‘wide-screen’ picture with black bars at the
top and bottom of the screen, or Pan Scan, for a full-height
picture with the sides trimmed. If a disc supports the
format, the picture will be shown accordingly.
Black level shift (NTSC users only)
Select ON for adapting the color dynamics to obtain richer
contrasts.
1en1en 1 2
TV shape
Black Level Shift
Video Shift
On
Off
Video shift
The factory centers the video on the screen. Use this
setting to personalize the position of the picture on the
screen by moving it to the left or right.
TV shape
Black Level Shift
Video Shift
Colour settings OK to exit
1en1en 1 2
Color settings
You can select one of five predefined sets of color settings
and one set (Personal) which you can define yourself.
1en1en 1 2
TV shape
Black Level Shift
Video Shift
Colour settings 4 Soft
3 Natural
2 Rich
1 Personal
Personal color
Allows you to fine-tune the selected color settings
saturation, brightness and contrast.
TV System
Usually you don’t have to change the default setting,
See ‘NTSC/PAL Conversion’ for detailed information.
Sound
Digital output
Factory setting: ALL. This means coaxial and optical outputs
are on. If you are not connecting to equipment with a digital
input, change the setting to OFF.
If your equipment doesn't include a digital multi-channel
decoder, set the digital output to PCM only (Pulse Code
Modulation).
Note:
When the setting is ALL, make sure that the selected audio
format of the disc you play matches the connected
equipment’s capability. If a digital signal which the equipment
cannot handle is output, there may be a noise and that could
damage your ears and your speakers.
When CDs were put on the market in the early stage, high
tones from some of them would be heard as punch lacked.
1en1en 1 2
Digital output
Analog output
Night mode
All
PCM only
Off
Analog output
Select Stereo, Dolby Surround or 3D Sound (TruSurround)
to match your system’s playback capability.
1en1en 1 2
Digital output
Analog output
Night mode
3D Sound
Dolby Surround
Stereo
PREPARATION
9
English
Night Mode
Optimizes the dynamics of the sound for low volume
playback.
Karaoke vocal
Put this setting to ON only when a multi-channel karaoke
DVD is being played. The karaoke channels on the disc will
then be mixed into a normal stereo sound.
Subwoofer cut-off
The frequency of the subwoofer output can be set to
HIGH (200Hz) or LOW (100Hz) to match your system’s
playback sound quality.
PCM Output
Allows to select PCM digital output between 48kHz and
96kHz. Some 96kHz DVD discs are copyright protected. If
your selection is 96kHz, the digital output is muted to
comply the standards. Please select 48kHz to enable the
output.
Language
Select the required Menu, Audio and Subtitle language.
Audio language and Subtitle language can also be adapted
using the Menu bar.
Features
Access Control
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-digit code
must be entered in order to play discs.
Parental control - Allows the conditional viewing of DVDs
containing Parental Control information.
Status Window
Displays the current status of the player and appears with
the menu bar. When disc playback is stopped, it is displayed
with the ‘Temporary Feedback Field’ in the default screen.
The factory setting is ON. Select OFF to suppress display of
the Status Window.
Low Power Standby
This setting is effective for Europe and U.K. models, when
the DVD player is connected between your TV and VCR
with SCART cables. If you use TV and VCR while the DVD
player is turned off, set Low Power Standby to OFF.
Otherwise VCR does not function.
PBC
Some Video CDs have PBC(Playback control). When
activated, a menu screen included on the disc appears soon
after playback starts.
Help text
When set to ON, help text describes the icons selected.
Select OFF if you no longer require the help text.
PREPARATION
10
Loading Discs
1 Press OPEN/CLOSE on the front of the player to open the
disc tray.
2 Load your chosen disc in the tray, label side up.
3 Press OPEN/CLOSE again to close the tray.
reading appears in the status window and READING
on the player display, and playback starts automatically.
Note:
If ‘Child Lock’ is set to ON and the disc inserted is not
authorized, the 4-digit code must be entered and/or the disc
must be authorized (see ‘Access Control’).
Playing a DVD Video and Video
CD
Playing a disc
After inserting the disc and closing the
tray, playback starts automatically. The
status window of the player display shows
the type of disc loaded, as well as the
disc’s information and playing time.
The disc may invite you to select an item from
a menu. If the selections are numbered, press
the appropriate numeric button; if not, use the
4 3 1 2 buttons to highlight your selection, then press
ENTER/OK.
The number of the current title and chapter are displayed
on the player display.
Playback may stop at the end of the Title and you may
return to the DVD disc menu.
To stop playback, press 9.
The default screen will appear, giving information about
the current status.
You can resume playback from the point at which you
stopped playback. Press B; when you see the Resume icon
. on the screen, press B again.
The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RETURN/RESUME on the
remote control. Or, press B when you see the Resume
icon . on the screen, then press B again.
Note:
DVDs may have a region code. The player will not play discs
that have a region code different from the region code of the
player.
General Features
Note:
Unless stated, all operations described are based on remote
control use. Some operations can be carried out using the
menu bar on the screen.
Moving to another title/chapter
When a disc has more than one title or
chapter, you can move to another title/
chapter as follows:
Press ON SCREEN, then select or in
the menu bar.
Press 3 or 4 to select a title/chapter.
Slow Motion
Select (SLOW MOTION) in the menu bar.
Use the 4 buttons to enter the SLOW MOTION menu.
Playback will pause.
Use the cursor buttons 1 2 to select the required speed: -
1, -1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1
(forward).
Select 1 or press B to play the disc at normal speed again.
If ; is pressed, the speed will be set to zero (PAUSE).
To exit slow motion mode, press 3.
(Playback continues at the selected speed.)
Still Picture and Frame-by-frame playback
Select (STEP) in the menu bar.
Use the 4 button to enter the step by
step menu.
Playback will pause.
Use the cursor buttons 1 2 to select the
previous or next picture frame.
To exit step by step playback, press 3.
You can also step forward by pressing ; repeatedly on the
remote control.
To resume playback, press B.
Scan
Scanning plays the first 10 seconds of each
chapter/track on the disc.
Press SCAN.
To continue playback at your chosen
chapter/track, press SCAN again or press B.
Note: This feature may not be available with some DVDs.
OPERATION
Operation
ON SCREEN
MENU
ENTER
OK
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
OK
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
11
English
Search
Select (FAST MOTION) in the menu
bar.
Use the 4 buttons to enter the FAST
MOTION menu.
Use the 1 2 buttons to select the
required speed: -32, -8 or -4 (backward), or +4, +8, +32
(forward).
Select 1 or press B to play the disc at normal speed again.
To exit fast motion mode, press 3.
(Playback continues at the selected speed.)
To search forward or backward through different speeds,
you can also hold down S or T.
Repeat
DVD Video Discs
Repeat chapter/title/disc
To repeat the current chapter, press
REPEAT.
REPEAT CHPT appears on the player display.
To repeat the current title, press REPEAT a second time.
REPEAT TITL appears on the player display.
To repeat the entire disc, press REPEAT a third time. (This
feature may not be available with some discs.)
REPEAT DISC appears on the player display.
To exit Repeat mode, press REPEAT a fourth time.
Video CDs
Repeat track/disc
To repeat the current track, press REPEAT.
REPEAT TRK appears on the player display.
To repeat the entire disc, press REPEAT a second time.
REPEAT DISC appears on the player display and the
screen.
To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a specific portion of a title:
Press A-B at your chosen starting point.
A- appears briefly on the screen.
Press A-B again at your chosen end point.
A-B appears briefly on the screen, and the repeat
sequence begins.(REPEAT A-B is displayed on the player
display)
To cancel the sequence and continue playback, press A-B.
Random-sequence play
DVD Video discs
This shuffles the playing order of chapters
within a title, if the title has more than one
chapter.
Press SHUFFLE during playback.
SHUFFLE appears on the screen and the player
display for about two seconds.
To return to normal playback, press SHUFFLE again.
Video CDs
Press SHUFFLE during playback.
SHUFFLE appears on the screen for about two
seconds.
To return to normal playback, press SHUFFLE again.
Time search
The Time Search function allows you to start playing at any
chosen time on the disc.
Select
(TIME SEARCH) in the menu bar.
Press 4.
Playback will pause.
A time edit box appears on the screen, showing the
elapsed playing time of the current disc.
Use the numeric buttons to enter the required start time.
Enter hours, minutes and seconds from left to right in the
box.
Each time an item has been entered, the next item will
be highlighted.
Press ENTER/OK to confirm the start time.
The time edit box will disappear and playback starts
from the selected time on the disc.
171
2:06:01
off
Zoom
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
Select (ZOOM).
Press 3/4 to activate the ZOOM function and select the
required zoom factor: 1.33 or 2 or 4.
Playback will pause.
The selected zoom factor appears below the Zoom icon
in the menu bar, and Press OK to pan appears below the
menu bar.
The picture will change accordingly.
Press ENTER/OK to confirm the selection.
The panning icons appear on the screen.
Use the 1 2 3 4 buttons to pan across the screen.
When ENTER/OK is pressed only the zoomed picture will
be shown on the screen.
To exit ZOOM mode:
Press B to resume playback.
press OK to pan
no 1.33
OPERATION
AUDIOZOOMANGLE
SUBTITLE
ENTER
OK
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
12
FTS-Video
The FTS-Video function allows you to store your favorite
titles and chapters (DVD) and favorite tracks and indexes
(VCD) for a particular disc in the player memory.
FTS program can contain 20 items (titles, chapters etc.).
Storing an FTS-Video Program
While playback is stopped, select VIDEO FTS c in the
menu bar.
Press 4 to open the menu.
The VIDEO FTS menu appears.
Storing titles/tracks
Press 4 to select TITLES.
Use 2 and 1 to select the required title.
Press ENTER/OK if you wish to store the entire title.
The title number will be added to the list of selections.
21Title 6543>987
21Chapter 6543>987
31
Clear all
Program
OffOnFTS
Favorite Track Selection
Storing chapters/indexes
Press 4 on the selected title number.
The title number will be marked and the highlight moves
to the first available chapter number for this title.
Use 2 and 1 to select the required chapter number.
Press ENTER/OK to confirm the selection.
The title/chapter selection will be added to the list of
selections.
To start FTS playback, press B when FTS is On.
Press ON SCREEN to exit the VIDEO FTS c menu.
Erasing an FTS-Video Program
Select VIDEO FTS c in the menu bar.
Use 4 to select PROGRAM.
Use 2 and 1 to select the required number.
Press ENTER/OK to erase the selection.
Press ON SCREEN to exit.
Erasing all selections
While playback is stopped, select VIDEO FTS c in the
menu bar.
Use 4 to select CLEAR ALL.
Press ENTER/OK.
All selections will be erased.
Press ON SCREEN to exit.
Switching FTS ON/OFF
1 Use 3 to move to FTS.
2 Use 2 or 1 to select either On or Off.
Special DVD Features
Checking the contents of DVD Video discs:
Menus
DVDs may contain menus to navigate the disc and access
special features. To use the menu, press the appropriate
numeric button or use the 4, 3, 2, 1 to highlight your
selection, then press ENTER/OK.
Title/Disc menu
Press MENU.
If the current title has a menu, the menu will appear on
the screen. Otherwise, the disc menu will be displayed.
The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon appears, showing the number
of available angles and the angle being shown currently. You
can then change the camera angle if you wish.
Press ANGLE or 3/4 to select the required angle.
After a while, playback changes to the selected angle. The
angle icon remains displayed until multiple angles are no
longer available.
Changing the audio format and/or language
Select Y (AUDIO) in the menu bar.
Press AUDIO or 3/4 repeatedly to see the different
format and/or languages.
Subtitles
Select Z (SUBTITLE) in the menu bar.
Press SUBTITLE or 3/4 repeatedly to see the different
subtitles.
Note:
With some discs, you cannot change angles, audio formats
and/or Languages, or subtitles in the way described above. In
that case, go to the disc menu to change them.
OPERATION
13
English
Special Video CD & SVCD
Features
Playback Control (PBC)
Load a Video CD with PBC and press B.
Go through the menu with the buttons indicated on the
screen until your chosen passage starts to play. If a PBC
menu consists of a list of titles, you can select a title directly.
Enter your choice with the numeric buttons (0-9).
Press RETURN/RESUME to go back to the previous menu.
You may also select PBC OFF under Personal
Preferences.
Note: When PBC is on, you cannot operate random, repeat, A-B
repeat, scan time search and FTS video with video CD’s
version 2.0.
Playing an Audio CD
After loading the disc, playback starts automatically.
If the TV is on, the Audio CD screen appears.
The number of tracks and the total playing time of the disc
will be shown on the screen.
During playback, the current track number and its elapsed
playing time will be shown on the screen and on the player
display.
Playback will stop at the end of the disc.
To stop playback at any other time, press 9.
OffOnFTS
12345678>Track
Track Time Total tracks Total time
Audio Disk Mode
1 0.00.39 15 1.17.02
Play
11 14
Clear all
Program
Pause
Press ; during playback.
To return to playback, press B.
Search
To search forward or backward through
the disc at four times the normal speed,
hold down S or T for about one
second during playback.
Search begins, and sound is partially muted.
To step up to eight times the normal speed, press S or
T again.
Search goes to eight times the speed, and the sound is
muted.
To return to four times the normal speed, press S or
T again.
If the TV is on, search speed and direction are indicated on
the screen each time S or T is pressed.
To end the search, press B to resume playback or press ;
to pause or press 9 to stop playback.
Moving to another track
Press S or T briefly during playback to go to the
next track or to return to the beginning of the current
track.
Press S twice briefly to step back to the previous track.
To go directly to any track, enter the track number using
the numeric buttons (0-9).
Random-sequence play
Press SHUFFLE during playback.
The playing order of the tracks is
changed.
To return to normal playback, press
SHUFFLE again.
Repeat track/disc
To repeat the current track, press
REPEAT.
REPEAT TRK appears on the player
display.
To repeat the entire disc, press REPEAT a second time.
REPEAT DISC appears on the player display.
To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a specific portion of a track:
Press A-B at your chosen starting point.
repeat A- appears on the screen.
Press A-B again at your chosen end point.
repeat A-B appears on the screen, and
the sequence begins to play repeatedly.
To cancel the sequence and continue playback, press A-B.
Scan
Scanning plays the first 10 seconds of each
track on the disc.
Press SCAN.
To continue playback at your chosen track,
press SCAN again or press B.
Favorite Track Selection (FTS)
Program
The FTS Program allows you to store your favorite tracks
for a particular disc in the player memory.
Each FTS Program can contain 20 tracks.
OffOnFTS
12345678>Track
Track Time Total tracks Total time
Audio Disk Mode
–– –.––.–– 15 1.17.02
Stop
11 14
Clear all
Program
OPERATION
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
OK
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
ENTER
OK
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
AUDIOZOOMANGLE
SUBTITLE
REPEAT
AB
SHUFFLE
SCAN
STOP PLAY PAUSE
14
Storing an FTS Program
1 Load a disc and stop playback.
2 Use 4 to go to the list of available tracks.
3 Use 2 or 1 to select tracks from the list.
To go directly to any track, enter the track number using
the numeric buttons (0-9).
4 Store each track by pressing ENTER/OK.
The track numbers will be added to the list.
The number of tracks and the playing time of the
program will be shown on the screen and the player display.
When your FTS Program is complete, press B to start
playback or, press 3 to go back to Stop mode. In either
case, the FTS Program will be automatically memorized.
Switching FTS ON/OFF
1 Use 3 to move to FTS.
2 Use 2 or 1 to select either On or Off.
Erasing a track from an FTS Program
1 Use 4 to go to the list of selected tracks.
2 Use 2 and 1 to select the track number you wish to erase.
3 Press ENTER/OK.
The track number will be erased from the list of selected
tracks.
Erasing the complete program
1 Use 4 to select CLEAR ALL, then press ENTER/OK.
The complete FTS Program for the disc will be erased.
MP3 Disc Features
Support following MP3-CD formats (ISO9660
format):
Max. 30 characters (filename or directory)
Max. nested directory is 8 levels
The max. album (directory) number is 32
Supported variable bit-rate
Supported sampling frequencies for MP3 disc are: 32 kHz,
44.1 kHz, 48 kHz
Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192,
256 (kbps)
Following formats can’t be supported
The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS
Chinese filename
The non-session closed discs
The discs recorded under UDF format
Downloading MP3 files from the Internet or copying songs
from your own legal discs is a delicate process.
Sound
Quality
Bit Rate
Approximate
Reduction Ratio
Approximate total
MP3-CD time
Comment
AM radio
FM radio
Near-CD
CD-like
CD*
CD*
32 kbps
64 kbps
96 kbps
128 kbps
256 kbps
320 kbps
40 : 1
20 : 1
15 : 1
10 : 1
5 : 1
3 : 1
40 hrs
20 hrs
15 hrs
10 hrs
5 hrs
3 hrs
Sound quality significantly affected
– not recommended.
Balanced sound quality
compression rate
Compression rate low
– suggest to play CDs instead
You may experience an occasional skip while
listening to your MP3 files. This is normal.
Additional note for MP3 disc Playback:
In compliance with the SDMI, digital-out is muted
while playing MP3 discs.
Due to the recording nature of Digital Audio MP3
(DAM),only Digital Audio music will play.
The disc reading time may exceed 10 seconds
due to the large number of songs compiled into one
disc.
Only the first session of multisession discs is
supported.
Some MP3 discs cannot be played depending on
the disc characteristics or recording conditions.
Album/Title
This feature allows you to view and select the next or
previous MP3 disc Album/Title.
1 Press 3/4 to scroll through the previous or next Album.
2 Press 1/2 to scroll through the previous or next Track.
will be displayed.
3 You can also select the desired album/track number directly
using the numeric buttons on the remote control.
Note:
In STOP mode: numbers are used for ALBUM selection.
In PLAY mode: numbers are used for TRACK selection.
Only the following functions are possible for MP3 discs:
STOP / PLAY / PAUSE
SKIP NEXT / PREVIOUS
REPEAT (TRACK / ALBUM / DISC)
MP3 Discs - Album/Track/Disc
To repeat a track, press REPEAT.
REPEAT TRK appears on the player display.
To repeat an album, press REPEAT a second time.
REPEAT ALBM appears on the player display.
To repeat the entire disc, press REPEAT a third time.
REPEAT DISC appears on the player display.
OPERATION
15
English
Deciding the PIN number
When changing Access control settings, first decide your
PIN number. You need to enter the number whenever your
change the settings.
1 Select ACCESS CONTROL in the features menu using
3/4, and then press 2.
2 Enter your 4-digit code of your own choice.
3 Enter the code a second time.
1en1en 1 2
Access control
Status window
Low Power standby
PBC
[ ] [ ] [ ] [ ]
Enter code
Access Control: Child Lock
(DVD Video and Video CD)
Activating/deactivating the Child Lock
1 Select ACCESS CONTROL in the features menu using
the 3/4, and then press 2.
2 Enter your 4-digit code of your own choice.
3 Move to CHILD LOCK using the 3/4.
4 Move to LOCK/UNLOCK using the 2.
5 Select LOCK using the 3/4.
6 Press ENTER/OK or 1 to confirm, then press 1 again to
exit the menu.
Now unauthorized discs will not be played unless the
4-digit code is entered.
7 Select UNLOCK to deactivate the CHILD LOCK.
1en1en 1 2
Access control
Status window
Low Power standby
PBC Change code
Change country
Parental level
Child lock
Authorizing discs
Insert the disc. See ‘Loading discs’.
The ‘child protect’ dialog will appear.
You will be asked to enter your secret code for ‘Playback
Once ‘or ‘Playback Always. If you select ‘Playback Once’, the
disc can be played as long as it is in the player and the
player is ON. If you select ‘Playback Always’, the disc will
become child safe (authorized) and can always be played,
even if the Child Lock is set to ON.
Notes:
The player memory maintains a list of 80 authorized
(‘Child safe’) disc titles. A disc will be placed in the list when
‘Playback Always’ is selected in the ‘child protect’ dialog.
Each time a ‘child safe’ disc is played, it will be placed on
top of the list. When the list is full and a new disc is added, the
last disc in the list will be removed from the list.
Double-sided DVDs may have a different ID for each side.
In order to make the disc ‘child safe’, each side has to be
authorized.
Multi-volume VCDs may have a different ID for each
volume. In order to make the complete set ‘child safe’, each
volume has to be authorized.
Access Control
Play once
locked
[ ] [ ] [ ] [ ]
Play always
Choose ’Play always‘ to insert the disk in
the child-safe list.
[ ] [ ] [ ] [ ]
Deauthorizing discs
Insert the disc. See ‘Loading discs’.
Playback starts automatically.
Press 9 while { is visible.
The | will appear and the disc is now deauthorized.
Note:
Playback continues even after you have deauthorized the disc.
Press 9 if you want to stop it.
Access Control: Parental
Control (DVD Video only)
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain ‘Parental Control’
information which applies to the complete disc or to
certain scenes on the disc. These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
the disc. Ratings are country dependent. The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
ACCESS CONTROL
Access Control
16
ACCESS CONTROL
Activating/Deactivating Parental Control
1 Select ACCESS CONTROL in the features menu using
the 3/4, and then press 2.
2 Enter your 4-digit code. If necessary, enter the code a
second time.
3 Move to Parental Control using the 3/4.
4 Move to VALUE ADJUSTMENT (0-8) using the 2.
5 Then use the 3/4 or the numeric buttons on the remote
control to select a rating from 0 to 8 for the disc inserted.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The Disc will be played in
full.
Ratings 1 to 8:
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc. The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
6 Press ENTER/OK or 1 to confirm, then press 1 again to
exit the menu.
1en1en 1 2
Access control
Status window
Low Power standby
PBC Change code
Change country
Parental level
Child lock
Country
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4, and then
press 2.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the 4.
4 Press the 2.
5 Select a country using 3/4.
6 Press ENTER/OK or 1 to confirm, then press 1 again to
exit the menu.
Changing the 4-digit code
1 Select ACCESS CONTROL in the features menu using
the 3/4, and then press 2.
2 Enter the old code.
3 Move to CHANGE CODE using the 4.
4 Press the 2.
5 Enter the new 4-digit code.
6 Enter the code a second time and reconfirm by pressing
ENTER/OK.
7 Press 1 to exit the menu.
If you forget your 4 digit code
1 Press 9 to exit the ‘Child Protect’ screen.
2 Select ACCESS CONTROL in the features menu using
the 3/4, and then press 2.
3 The 4-digit code can be cancelled by pressing 9 four times
in the ‘Access Control’ dialog.
4 You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
This player features the PARENTAL CONTROL system
which is intended to activate when playing DVD discs
furnished with certain software coding. This is according to
technical standards adopted by the set maker and disc
content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD disc which is not furnished with the
appropriate software coding. Also note that at the time of
release of the player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis, Yamaha cannot guarantee the functioning of
the PARENTAL CONTROL system and denies any
liability associated with unintended watching of disc
content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access to the player.
1 / 1

Yamaha DV-S5450 Инструкция по применению

Категория
Проигрыватели DVD
Тип
Инструкция по применению
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ